intel-iommu: Check for 'DMAR at zero' BIOS error earlier.
[safe/jmp/linux-2.6] / drivers / pci / pci-acpi.c
1 /*
2  * File:        pci-acpi.c
3  * Purpose:     Provide PCI support in ACPI
4  *
5  * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com>
6  * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com>
7  * Copyright (C) 2004 Intel Corp.
8  */
9
10 #include <linux/delay.h>
11 #include <linux/init.h>
12 #include <linux/pci.h>
13 #include <linux/module.h>
14 #include <linux/pci-aspm.h>
15 #include <acpi/acpi.h>
16 #include <acpi/acpi_bus.h>
17
18 #include <linux/pci-acpi.h>
19 #include "pci.h"
20
21 /*
22  * _SxD returns the D-state with the highest power
23  * (lowest D-state number) supported in the S-state "x".
24  *
25  * If the devices does not have a _PRW
26  * (Power Resources for Wake) supporting system wakeup from "x"
27  * then the OS is free to choose a lower power (higher number
28  * D-state) than the return value from _SxD.
29  *
30  * But if _PRW is enabled at S-state "x", the OS
31  * must not choose a power lower than _SxD --
32  * unless the device has an _SxW method specifying
33  * the lowest power (highest D-state number) the device
34  * may enter while still able to wake the system.
35  *
36  * ie. depending on global OS policy:
37  *
38  * if (_PRW at S-state x)
39  *      choose from highest power _SxD to lowest power _SxW
40  * else // no _PRW at S-state x
41  *      choose highest power _SxD or any lower power
42  */
43
44 static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
45 {
46         int acpi_state;
47
48         acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL);
49         if (acpi_state < 0)
50                 return PCI_POWER_ERROR;
51
52         switch (acpi_state) {
53         case ACPI_STATE_D0:
54                 return PCI_D0;
55         case ACPI_STATE_D1:
56                 return PCI_D1;
57         case ACPI_STATE_D2:
58                 return PCI_D2;
59         case ACPI_STATE_D3:
60                 return PCI_D3hot;
61         }
62         return PCI_POWER_ERROR;
63 }
64
65 static bool acpi_pci_power_manageable(struct pci_dev *dev)
66 {
67         acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
68
69         return handle ? acpi_bus_power_manageable(handle) : false;
70 }
71
72 static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
73 {
74         acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
75         acpi_handle tmp;
76         static const u8 state_conv[] = {
77                 [PCI_D0] = ACPI_STATE_D0,
78                 [PCI_D1] = ACPI_STATE_D1,
79                 [PCI_D2] = ACPI_STATE_D2,
80                 [PCI_D3hot] = ACPI_STATE_D3,
81                 [PCI_D3cold] = ACPI_STATE_D3
82         };
83         int error = -EINVAL;
84
85         /* If the ACPI device has _EJ0, ignore the device */
86         if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
87                 return -ENODEV;
88
89         switch (state) {
90         case PCI_D0:
91         case PCI_D1:
92         case PCI_D2:
93         case PCI_D3hot:
94         case PCI_D3cold:
95                 error = acpi_bus_set_power(handle, state_conv[state]);
96         }
97
98         if (!error)
99                 dev_printk(KERN_INFO, &dev->dev,
100                                 "power state changed by ACPI to D%d\n", state);
101
102         return error;
103 }
104
105 static bool acpi_pci_can_wakeup(struct pci_dev *dev)
106 {
107         acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
108
109         return handle ? acpi_bus_can_wakeup(handle) : false;
110 }
111
112 static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable)
113 {
114         while (bus->parent) {
115                 struct pci_dev *bridge = bus->self;
116                 int ret;
117
118                 ret = acpi_pm_device_sleep_wake(&bridge->dev, enable);
119                 if (!ret || bridge->is_pcie)
120                         return;
121                 bus = bus->parent;
122         }
123
124         /* We have reached the root bus. */
125         if (bus->bridge)
126                 acpi_pm_device_sleep_wake(bus->bridge, enable);
127 }
128
129 static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
130 {
131         if (acpi_pci_can_wakeup(dev))
132                 return acpi_pm_device_sleep_wake(&dev->dev, enable);
133
134         if (!dev->is_pcie)
135                 acpi_pci_propagate_wakeup_enable(dev->bus, enable);
136
137         return 0;
138 }
139
140 static struct pci_platform_pm_ops acpi_pci_platform_pm = {
141         .is_manageable = acpi_pci_power_manageable,
142         .set_state = acpi_pci_set_power_state,
143         .choose_state = acpi_pci_choose_state,
144         .can_wakeup = acpi_pci_can_wakeup,
145         .sleep_wake = acpi_pci_sleep_wake,
146 };
147
148 /* ACPI bus type */
149 static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
150 {
151         struct pci_dev * pci_dev;
152         acpi_integer    addr;
153
154         pci_dev = to_pci_dev(dev);
155         /* Please ref to ACPI spec for the syntax of _ADR */
156         addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
157         *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
158         if (!*handle)
159                 return -ENODEV;
160         return 0;
161 }
162
163 static int acpi_pci_find_root_bridge(struct device *dev, acpi_handle *handle)
164 {
165         int num;
166         unsigned int seg, bus;
167
168         /*
169          * The string should be the same as root bridge's name
170          * Please look at 'pci_scan_bus_parented'
171          */
172         num = sscanf(dev_name(dev), "pci%04x:%02x", &seg, &bus);
173         if (num != 2)
174                 return -ENODEV;
175         *handle = acpi_get_pci_rootbridge_handle(seg, bus);
176         if (!*handle)
177                 return -ENODEV;
178         return 0;
179 }
180
181 static struct acpi_bus_type acpi_pci_bus = {
182         .bus = &pci_bus_type,
183         .find_device = acpi_pci_find_device,
184         .find_bridge = acpi_pci_find_root_bridge,
185 };
186
187 static int __init acpi_pci_init(void)
188 {
189         int ret;
190
191         if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_MSI) {
192                 printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
193                 pci_no_msi();
194         }
195
196         if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
197                 printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
198                 pcie_no_aspm();
199         }
200
201         ret = register_acpi_bus_type(&acpi_pci_bus);
202         if (ret)
203                 return 0;
204         pci_set_platform_pm(&acpi_pci_platform_pm);
205         return 0;
206 }
207 arch_initcall(acpi_pci_init);