NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines.

[safe/jmp/linux-2.6] / drivers / net / wireless / strip.c

/*
 * Copyright 1996 The Board of Trustees of The Leland Stanford
 * Junior University. All Rights Reserved.
 *
 * Permission to use, copy, modify, and distribute this
 * software and its documentation for any purpose and without
 * fee is hereby granted, provided that the above copyright
 * notice appear in all copies.  Stanford University
 * makes no representations about the suitability of this
 * software for any purpose.  It is provided "as is" without
 * express or implied warranty.
 *
 * strip.c      This module implements Starmode Radio IP (STRIP)
 *              for kernel-based devices like TTY.  It interfaces between a
 *              raw TTY, and the kernel's INET protocol layers (via DDI).
 *
 * Version:     @(#)strip.c     1.3     July 1997
 *
 * Author:      Stuart Cheshire <cheshire@cs.stanford.edu>
 *
 * Fixes:       v0.9 12th Feb 1996 (SC)
 *              New byte stuffing (2+6 run-length encoding)
 *              New watchdog timer task
 *              New Protocol key (SIP0)
 *              
 *              v0.9.1 3rd March 1996 (SC)
 *              Changed to dynamic device allocation -- no more compile
 *              time (or boot time) limit on the number of STRIP devices.
 *              
 *              v0.9.2 13th March 1996 (SC)
 *              Uses arp cache lookups (but doesn't send arp packets yet)
 *              
 *              v0.9.3 17th April 1996 (SC)
 *              Fixed bug where STR_ERROR flag was getting set unneccessarily
 *              (causing otherwise good packets to be unneccessarily dropped)
 *              
 *              v0.9.4 27th April 1996 (SC)
 *              First attempt at using "&COMMAND" Starmode AT commands
 *              
 *              v0.9.5 29th May 1996 (SC)
 *              First attempt at sending (unicast) ARP packets
 *              
 *              v0.9.6 5th June 1996 (Elliot)
 *              Put "message level" tags in every "printk" statement
 *              
 *              v0.9.7 13th June 1996 (laik)
 *              Added support for the /proc fs
 *
 *              v0.9.8 July 1996 (Mema)
 *              Added packet logging
 *
 *              v1.0 November 1996 (SC)
 *              Fixed (severe) memory leaks in the /proc fs code
 *              Fixed race conditions in the logging code
 *
 *              v1.1 January 1997 (SC)
 *              Deleted packet logging (use tcpdump instead)
 *              Added support for Metricom Firmware v204 features
 *              (like message checksums)
 *
 *              v1.2 January 1997 (SC)
 *              Put portables list back in
 *
 *              v1.3 July 1997 (SC)
 *              Made STRIP driver set the radio's baud rate automatically.
 *              It is no longer necessarily to manually set the radio's
 *              rate permanently to 115200 -- the driver handles setting
 *              the rate automatically.
 */

#ifdef MODULE
static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR";
#else
static const char StripVersion[] = "1.3A-STUART.CHESHIRE";
#endif

#define TICKLE_TIMERS 0
#define EXT_COUNTERS 1


/************************************************************************/
/* Header files                                                         */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/uaccess.h>

# include <linux/ctype.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/if_strip.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/rcupdate.h>
#include <net/arp.h>
#include <net/net_namespace.h>

#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/time.h>
#include <linux/jiffies.h>

/************************************************************************/
/* Useful structures and definitions                                    */

/*
 * A MetricomKey identifies the protocol being carried inside a Metricom
 * Starmode packet.
 */

typedef union {
        __u8 c[4];
        __u32 l;
} MetricomKey;

/*
 * An IP address can be viewed as four bytes in memory (which is what it is) or as
 * a single 32-bit long (which is convenient for assignment, equality testing etc.)
 */

typedef union {
        __u8 b[4];
        __u32 l;
} IPaddr;

/*
 * A MetricomAddressString is used to hold a printable representation of
 * a Metricom address.
 */

typedef struct {
        __u8 c[24];
} MetricomAddressString;

/* Encapsulation can expand packet of size x to 65/64x + 1
 * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>"
 *                           1 1   1-18  1  4         ?         1
 * eg.                     <CR>*0000-1234*SIP0<encaps payload><CR>
 * We allow 31 bytes for the stars, the key, the address and the <CR>s
 */
#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L)

/*
 * A STRIP_Header is never really sent over the radio, but making a dummy
 * header for internal use within the kernel that looks like an Ethernet
 * header makes certain other software happier. For example, tcpdump
 * already understands Ethernet headers.
 */

typedef struct {
        MetricomAddress dst_addr;       /* Destination address, e.g. "0000-1234"   */
        MetricomAddress src_addr;       /* Source address, e.g. "0000-5678"        */
        unsigned short protocol;        /* The protocol type, using Ethernet codes */
} STRIP_Header;

typedef struct {
        char c[60];
} MetricomNode;

#define NODE_TABLE_SIZE 32
typedef struct {
        struct timeval timestamp;
        int num_nodes;
        MetricomNode node[NODE_TABLE_SIZE];
} MetricomNodeTable;

enum { FALSE = 0, TRUE = 1 };

/*
 * Holds the radio's firmware version.
 */
typedef struct {
        char c[50];
} FirmwareVersion;

/*
 * Holds the radio's serial number.
 */
typedef struct {
        char c[18];
} SerialNumber;

/*
 * Holds the radio's battery voltage.
 */
typedef struct {
        char c[11];
} BatteryVoltage;

typedef struct {
        char c[8];
} char8;

enum {
        NoStructure = 0,        /* Really old firmware */
        StructuredMessages = 1, /* Parsable AT response msgs */
        ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */
};

struct strip {
        int magic;
        /*
         * These are pointers to the malloc()ed frame buffers.
         */

        unsigned char *rx_buff; /* buffer for received IP packet */
        unsigned char *sx_buff; /* buffer for received serial data */
        int sx_count;           /* received serial data counter */
        int sx_size;            /* Serial buffer size           */
        unsigned char *tx_buff; /* transmitter buffer           */
        unsigned char *tx_head; /* pointer to next byte to XMIT */
        int tx_left;            /* bytes left in XMIT queue     */
        int tx_size;            /* Serial buffer size           */

        /*
         * STRIP interface statistics.
         */

        unsigned long rx_packets;       /* inbound frames counter       */
        unsigned long tx_packets;       /* outbound frames counter      */
        unsigned long rx_errors;        /* Parity, etc. errors          */
        unsigned long tx_errors;        /* Planned stuff                */
        unsigned long rx_dropped;       /* No memory for skb            */
        unsigned long tx_dropped;       /* When MTU change              */
        unsigned long rx_over_errors;   /* Frame bigger than STRIP buf. */

        unsigned long pps_timer;        /* Timer to determine pps       */
        unsigned long rx_pps_count;     /* Counter to determine pps     */
        unsigned long tx_pps_count;     /* Counter to determine pps     */
        unsigned long sx_pps_count;     /* Counter to determine pps     */
        unsigned long rx_average_pps;   /* rx packets per second * 8    */
        unsigned long tx_average_pps;   /* tx packets per second * 8    */
        unsigned long sx_average_pps;   /* sent packets per second * 8  */

#ifdef EXT_COUNTERS
        unsigned long rx_bytes;         /* total received bytes */
        unsigned long tx_bytes;         /* total received bytes */
        unsigned long rx_rbytes;        /* bytes thru radio i/f */
        unsigned long tx_rbytes;        /* bytes thru radio i/f */
        unsigned long rx_sbytes;        /* tot bytes thru serial i/f */
        unsigned long tx_sbytes;        /* tot bytes thru serial i/f */
        unsigned long rx_ebytes;        /* tot stat/err bytes */
        unsigned long tx_ebytes;        /* tot stat/err bytes */
#endif

        /*
         * Internal variables.
         */

        struct list_head  list;         /* Linked list of devices */

        int discard;                    /* Set if serial error          */
        int working;                    /* Is radio working correctly?  */
        int firmware_level;             /* Message structuring level    */
        int next_command;               /* Next periodic command        */
        unsigned int user_baud;         /* The user-selected baud rate  */
        int mtu;                        /* Our mtu (to spot changes!)   */
        long watchdog_doprobe;          /* Next time to test the radio  */
        long watchdog_doreset;          /* Time to do next reset        */
        long gratuitous_arp;            /* Time to send next ARP refresh */
        long arp_interval;              /* Next ARP interval            */
        struct timer_list idle_timer;   /* For periodic wakeup calls    */
        MetricomAddress true_dev_addr;  /* True address of radio        */
        int manual_dev_addr;            /* Hack: See note below         */

        FirmwareVersion firmware_version;       /* The radio's firmware version */
        SerialNumber serial_number;     /* The radio's serial number    */
        BatteryVoltage battery_voltage; /* The radio's battery voltage  */

        /*
         * Other useful structures.
         */

        struct tty_struct *tty;         /* ptr to TTY structure         */
        struct net_device *dev;         /* Our device structure         */

        /*
         * Neighbour radio records
         */

        MetricomNodeTable portables;
        MetricomNodeTable poletops;
};

/*
 * Note: manual_dev_addr hack
 * 
 * It is not possible to change the hardware address of a Metricom radio,
 * or to send packets with a user-specified hardware source address, thus
 * trying to manually set a hardware source address is a questionable
 * thing to do.  However, if the user *does* manually set the hardware
 * source address of a STRIP interface, then the kernel will believe it,
 * and use it in certain places. For example, the hardware address listed
 * by ifconfig will be the manual address, not the true one.
 * (Both addresses are listed in /proc/net/strip.)
 * Also, ARP packets will be sent out giving the user-specified address as
 * the source address, not the real address. This is dangerous, because
 * it means you won't receive any replies -- the ARP replies will go to
 * the specified address, which will be some other radio. The case where
 * this is useful is when that other radio is also connected to the same
 * machine. This allows you to connect a pair of radios to one machine,
 * and to use one exclusively for inbound traffic, and the other
 * exclusively for outbound traffic. Pretty neat, huh?
 * 
 * Here's the full procedure to set this up:
 * 
 * 1. "slattach" two interfaces, e.g. st0 for outgoing packets,
 *    and st1 for incoming packets
 * 
 * 2. "ifconfig" st0 (outbound radio) to have the hardware address
 *    which is the real hardware address of st1 (inbound radio).
 *    Now when it sends out packets, it will masquerade as st1, and
 *    replies will be sent to that radio, which is exactly what we want.
 * 
 * 3. Set the route table entry ("route add default ..." or
 *    "route add -net ...", as appropriate) to send packets via the st0
 *    interface (outbound radio). Do not add any route which sends packets
 *    out via the st1 interface -- that radio is for inbound traffic only.
 * 
 * 4. "ifconfig" st1 (inbound radio) to have hardware address zero.
 *    This tells the STRIP driver to "shut down" that interface and not
 *    send any packets through it. In particular, it stops sending the
 *    periodic gratuitous ARP packets that a STRIP interface normally sends.
 *    Also, when packets arrive on that interface, it will search the
 *    interface list to see if there is another interface who's manual
 *    hardware address matches its own real address (i.e. st0 in this
 *    example) and if so it will transfer ownership of the skbuff to
 *    that interface, so that it looks to the kernel as if the packet
 *    arrived on that interface. This is necessary because when the
 *    kernel sends an ARP packet on st0, it expects to get a reply on
 *    st0, and if it sees the reply come from st1 then it will ignore
 *    it (to be accurate, it puts the entry in the ARP table, but
 *    labelled in such a way that st0 can't use it).
 * 
 * Thanks to Petros Maniatis for coming up with the idea of splitting
 * inbound and outbound traffic between two interfaces, which turned
 * out to be really easy to implement, even if it is a bit of a hack.
 * 
 * Having set a manual address on an interface, you can restore it
 * to automatic operation (where the address is automatically kept
 * consistent with the real address of the radio) by setting a manual
 * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF"
 * This 'turns off' manual override mode for the device address.
 * 
 * Note: The IEEE 802 headers reported in tcpdump will show the *real*
 * radio addresses the packets were sent and received from, so that you
 * can see what is really going on with packets, and which interfaces
 * they are really going through.
 */


/************************************************************************/
/* Constants                                                            */

/*
 * CommandString1 works on all radios
 * Other CommandStrings are only used with firmware that provides structured responses.
 * 
 * ats319=1 Enables Info message for node additions and deletions
 * ats319=2 Enables Info message for a new best node
 * ats319=4 Enables checksums
 * ats319=8 Enables ACK messages
 */

static const int MaxCommandStringLength = 32;
static const int CompatibilityCommand = 1;

static const char CommandString0[] = "*&COMMAND*ATS319=7";      /* Turn on checksums & info messages */
static const char CommandString1[] = "*&COMMAND*ATS305?";       /* Query radio name */
static const char CommandString2[] = "*&COMMAND*ATS325?";       /* Query battery voltage */
static const char CommandString3[] = "*&COMMAND*ATS300?";       /* Query version information */
static const char CommandString4[] = "*&COMMAND*ATS311?";       /* Query poletop list */
static const char CommandString5[] = "*&COMMAND*AT~LA";         /* Query portables list */
typedef struct {
        const char *string;
        long length;
} StringDescriptor;

static const StringDescriptor CommandString[] = {
        {CommandString0, sizeof(CommandString0) - 1},
        {CommandString1, sizeof(CommandString1) - 1},
        {CommandString2, sizeof(CommandString2) - 1},
        {CommandString3, sizeof(CommandString3) - 1},
        {CommandString4, sizeof(CommandString4) - 1},
        {CommandString5, sizeof(CommandString5) - 1}
};

#define GOT_ALL_RADIO_INFO(S)      \
    ((S)->firmware_version.c[0] && \
     (S)->battery_voltage.c[0]  && \
     memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address)))

static const char hextable[16] = "0123456789ABCDEF";

static const MetricomAddress zero_address;
static const MetricomAddress broadcast_address =
    { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };

static const MetricomKey SIP0Key = { "SIP0" };
static const MetricomKey ARP0Key = { "ARP0" };
static const MetricomKey ATR_Key = { "ATR " };
static const MetricomKey ACK_Key = { "ACK_" };
static const MetricomKey INF_Key = { "INF_" };
static const MetricomKey ERR_Key = { "ERR_" };

static const long MaxARPInterval = 60 * HZ;     /* One minute */

/*
 * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for
 * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion
 * for STRIP encoding, that translates to a maximum payload MTU of 1155.
 * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes
 * long, including IP header, UDP header, and NFS header. Setting the STRIP
 * MTU to 1152 allows us to send default sized NFS packets without fragmentation.
 */
static const unsigned short MAX_SEND_MTU = 1152;
static const unsigned short MAX_RECV_MTU = 1500;        /* Hoping for Ethernet sized packets in the future! */
static const unsigned short DEFAULT_STRIP_MTU = 1152;
static const int STRIP_MAGIC = 0x5303;
static const long LongTime = 0x7FFFFFFF;

/************************************************************************/
/* Global variables                                                     */

static LIST_HEAD(strip_list);
static DEFINE_SPINLOCK(strip_lock);

/************************************************************************/
/* Macros                                                               */

/* Returns TRUE if text T begins with prefix P */
#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1))

/* Returns TRUE if text T of length L is equal to string S */
#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1))

#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' :      \
                    (X)>='a' && (X)<='f' ? (X)-'a'+10 :   \
                    (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 )

#define READHEX16(X) ((__u16)(READHEX(X)))

#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0)

#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))

#define JIFFIE_TO_SEC(X) ((X) / HZ)


/************************************************************************/
/* Utility routines                                                     */

static int arp_query(unsigned char *haddr, u32 paddr,
                     struct net_device *dev)
{
        struct neighbour *neighbor_entry;
        int ret = 0;

        neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev);

        if (neighbor_entry != NULL) {
                neighbor_entry->used = jiffies;
                if (neighbor_entry->nud_state & NUD_VALID) {
                        memcpy(haddr, neighbor_entry->ha, dev->addr_len);
                        ret = 1;
                }
                neigh_release(neighbor_entry);
        }
        return ret;
}

static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr,
                     __u8 * end)
{
        static const int MAX_DumpData = 80;
        __u8 pkt_text[MAX_DumpData], *p = pkt_text;

        *p++ = '\"';

        while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) {
                if (*ptr == '\\') {
                        *p++ = '\\';
                        *p++ = '\\';
                } else {
                        if (*ptr >= 32 && *ptr <= 126) {
                                *p++ = *ptr;
                        } else {
                                sprintf(p, "\\%02X", *ptr);
                                p += 3;
                        }
                }
                ptr++;
        }

        if (ptr == end)
                *p++ = '\"';
        *p++ = 0;

        printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text);
}


/************************************************************************/
/* Byte stuffing/unstuffing routines                                    */

/* Stuffing scheme:
 * 00    Unused (reserved character)
 * 01-3F Run of 2-64 different characters
 * 40-7F Run of 1-64 different characters plus a single zero at the end
 * 80-BF Run of 1-64 of the same character
 * C0-FF Run of 1-64 zeroes (ASCII 0)
 */

typedef enum {
        Stuff_Diff = 0x00,
        Stuff_DiffZero = 0x40,
        Stuff_Same = 0x80,
        Stuff_Zero = 0xC0,
        Stuff_NoCode = 0xFF,    /* Special code, meaning no code selected */

        Stuff_CodeMask = 0xC0,
        Stuff_CountMask = 0x3F,
        Stuff_MaxCount = 0x3F,
        Stuff_Magic = 0x0D      /* The value we are eliminating */
} StuffingCode;

/* StuffData encodes the data starting at "src" for "length" bytes.
 * It writes it to the buffer pointed to by "dst" (which must be at least
 * as long as 1 + 65/64 of the input length). The output may be up to 1.6%
 * larger than the input for pathological input, but will usually be smaller.
 * StuffData returns the new value of the dst pointer as its result.
 * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state
 * between calls, allowing an encoded packet to be incrementally built up
 * from small parts. On the first call, the "__u8 *" pointed to should be
 * initialized to NULL; between subsequent calls the calling routine should
 * leave the value alone and simply pass it back unchanged so that the
 * encoder can recover its current state.
 */

#define StuffData_FinishBlock(X) \
(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode)

static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst,
                       __u8 ** code_ptr_ptr)
{
        __u8 *end = src + length;
        __u8 *code_ptr = *code_ptr_ptr;
        __u8 code = Stuff_NoCode, count = 0;

        if (!length)
                return (dst);

        if (code_ptr) {
                /*
                 * Recover state from last call, if applicable
                 */
                code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask;
                count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask;
        }

        while (src < end) {
                switch (code) {
                        /* Stuff_NoCode: If no current code, select one */
                case Stuff_NoCode:
                        /* Record where we're going to put this code */
                        code_ptr = dst++;
                        count = 0;      /* Reset the count (zero means one instance) */
                        /* Tentatively start a new block */
                        if (*src == 0) {
                                code = Stuff_Zero;
                                src++;
                        } else {
                                code = Stuff_Same;
                                *dst++ = *src++ ^ Stuff_Magic;
                        }
                        /* Note: We optimistically assume run of same -- */
                        /* which will be fixed later in Stuff_Same */
                        /* if it turns out not to be true. */
                        break;

                        /* Stuff_Zero: We already have at least one zero encoded */
                case Stuff_Zero:
                        /* If another zero, count it, else finish this code block */
                        if (*src == 0) {
                                count++;
                                src++;
                        } else {
                                StuffData_FinishBlock(Stuff_Zero + count);
                        }
                        break;

                        /* Stuff_Same: We already have at least one byte encoded */
                case Stuff_Same:
                        /* If another one the same, count it */
                        if ((*src ^ Stuff_Magic) == code_ptr[1]) {
                                count++;
                                src++;
                                break;
                        }
                        /* else, this byte does not match this block. */
                        /* If we already have two or more bytes encoded, finish this code block */
                        if (count) {
                                StuffData_FinishBlock(Stuff_Same + count);
                                break;
                        }
                        /* else, we only have one so far, so switch to Stuff_Diff code */
                        code = Stuff_Diff;
                        /* and fall through to Stuff_Diff case below
                         * Note cunning cleverness here: case Stuff_Diff compares 
                         * the current character with the previous two to see if it
                         * has a run of three the same. Won't this be an error if
                         * there aren't two previous characters stored to compare with?
                         * No. Because we know the current character is *not* the same
                         * as the previous one, the first test below will necessarily
                         * fail and the send half of the "if" won't be executed.
                         */

                        /* Stuff_Diff: We have at least two *different* bytes encoded */
                case Stuff_Diff:
                        /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */
                        if (*src == 0) {
                                StuffData_FinishBlock(Stuff_DiffZero +
                                                      count);
                        }
                        /* else, if we have three in a row, it is worth starting a Stuff_Same block */
                        else if ((*src ^ Stuff_Magic) == dst[-1]
                                 && dst[-1] == dst[-2]) {
                                /* Back off the last two characters we encoded */
                                code += count - 2;
                                /* Note: "Stuff_Diff + 0" is an illegal code */
                                if (code == Stuff_Diff + 0) {
                                        code = Stuff_Same + 0;
                                }
                                StuffData_FinishBlock(code);
                                code_ptr = dst - 2;
                                /* dst[-1] already holds the correct value */
                                count = 2;      /* 2 means three bytes encoded */
                                code = Stuff_Same;
                        }
                        /* else, another different byte, so add it to the block */
                        else {
                                *dst++ = *src ^ Stuff_Magic;
                                count++;
                        }
                        src++;  /* Consume the byte */
                        break;
                }
                if (count == Stuff_MaxCount) {
                        StuffData_FinishBlock(code + count);
                }
        }
        if (code == Stuff_NoCode) {
                *code_ptr_ptr = NULL;
        } else {
                *code_ptr_ptr = code_ptr;
                StuffData_FinishBlock(code + count);
        }
        return (dst);
}

/*
 * UnStuffData decodes the data at "src", up to (but not including) "end".
 * It writes the decoded data into the buffer pointed to by "dst", up to a
 * maximum of "dst_length", and returns the new value of "src" so that a
 * follow-on call can read more data, continuing from where the first left off.
 * 
 * There are three types of results:
 * 1. The source data runs out before extracting "dst_length" bytes:
 *    UnStuffData returns NULL to indicate failure.
 * 2. The source data produces exactly "dst_length" bytes:
 *    UnStuffData returns new_src = end to indicate that all bytes were consumed.
 * 3. "dst_length" bytes are extracted, with more remaining.
 *    UnStuffData returns new_src < end to indicate that there are more bytes
 *    to be read.
 * 
 * Note: The decoding may be destructive, in that it may alter the source
 * data in the process of decoding it (this is necessary to allow a follow-on
 * call to resume correctly).
 */

static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst,
                         __u32 dst_length)
{
        __u8 *dst_end = dst + dst_length;
        /* Sanity check */
        if (!src || !end || !dst || !dst_length)
                return (NULL);
        while (src < end && dst < dst_end) {
                int count = (*src ^ Stuff_Magic) & Stuff_CountMask;
                switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) {
                case Stuff_Diff:
                        if (src + 1 + count >= end)
                                return (NULL);
                        do {
                                *dst++ = *++src ^ Stuff_Magic;
                        }
                        while (--count >= 0 && dst < dst_end);
                        if (count < 0)
                                src += 1;
                        else {
                                if (count == 0)
                                        *src = Stuff_Same ^ Stuff_Magic;
                                else
                                        *src =
                                            (Stuff_Diff +
                                             count) ^ Stuff_Magic;
                        }
                        break;
                case Stuff_DiffZero:
                        if (src + 1 + count >= end)
                                return (NULL);
                        do {
                                *dst++ = *++src ^ Stuff_Magic;
                        }
                        while (--count >= 0 && dst < dst_end);
                        if (count < 0)
                                *src = Stuff_Zero ^ Stuff_Magic;
                        else
                                *src =
                                    (Stuff_DiffZero + count) ^ Stuff_Magic;
                        break;
                case Stuff_Same:
                        if (src + 1 >= end)
                                return (NULL);
                        do {
                                *dst++ = src[1] ^ Stuff_Magic;
                        }
                        while (--count >= 0 && dst < dst_end);
                        if (count < 0)
                                src += 2;
                        else
                                *src = (Stuff_Same + count) ^ Stuff_Magic;
                        break;
                case Stuff_Zero:
                        do {
                                *dst++ = 0;
                        }
                        while (--count >= 0 && dst < dst_end);
                        if (count < 0)
                                src += 1;
                        else
                                *src = (Stuff_Zero + count) ^ Stuff_Magic;
                        break;
                }
        }
        if (dst < dst_end)
                return (NULL);
        else
                return (src);
}


/************************************************************************/
/* General routines for STRIP                                           */

/*
 * set_baud sets the baud rate to the rate defined by baudcode
 */
static void set_baud(struct tty_struct *tty, speed_t baudrate)
{
        struct ktermios old_termios;

        mutex_lock(&tty->termios_mutex);
        old_termios =*(tty->termios);
        tty_encode_baud_rate(tty, baudrate, baudrate);
        tty->ops->set_termios(tty, &old_termios);
        mutex_unlock(&tty->termios_mutex);
}

/*
 * Convert a string to a Metricom Address.
 */

#define IS_RADIO_ADDRESS(p) (                                                 \
  isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \
  (p)[4] == '-' &&                                                            \
  isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8])    )

static int string_to_radio_address(MetricomAddress * addr, __u8 * p)
{
        if (!IS_RADIO_ADDRESS(p))
                return (1);
        addr->c[0] = 0;
        addr->c[1] = 0;
        addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]);
        addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]);
        addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]);
        addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]);
        return (0);
}

/*
 * Convert a Metricom Address to a string.
 */

static __u8 *radio_address_to_string(const MetricomAddress * addr,
                                     MetricomAddressString * p)
{
        sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3],
                addr->c[4], addr->c[5]);
        return (p->c);
}

/*
 * Note: Must make sure sx_size is big enough to receive a stuffed
 * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's
 * big enough to receive a large radio neighbour list (currently 4K).
 */

static int allocate_buffers(struct strip *strip_info, int mtu)
{
        struct net_device *dev = strip_info->dev;
        int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096);
        int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength;
        __u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC);
        __u8 *s = kmalloc(sx_size, GFP_ATOMIC);
        __u8 *t = kmalloc(tx_size, GFP_ATOMIC);
        if (r && s && t) {
                strip_info->rx_buff = r;
                strip_info->sx_buff = s;
                strip_info->tx_buff = t;
                strip_info->sx_size = sx_size;
                strip_info->tx_size = tx_size;
                strip_info->mtu = dev->mtu = mtu;
                return (1);
        }
        kfree(r);
        kfree(s);
        kfree(t);
        return (0);
}

/*
 * MTU has been changed by the IP layer. 
 * We could be in
 * an upcall from the tty driver, or in an ip packet queue.
 */
static int strip_change_mtu(struct net_device *dev, int new_mtu)
{
        struct strip *strip_info = netdev_priv(dev);
        int old_mtu = strip_info->mtu;
        unsigned char *orbuff = strip_info->rx_buff;
        unsigned char *osbuff = strip_info->sx_buff;
        unsigned char *otbuff = strip_info->tx_buff;
        unsigned long flags;

        if (new_mtu > MAX_SEND_MTU) {
                printk(KERN_ERR
                       "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
                       strip_info->dev->name, MAX_SEND_MTU);
                return -EINVAL;
        }

        spin_lock_irqsave(&strip_lock, flags);
        if (!allocate_buffers(strip_info, new_mtu)) {
                printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n",
                       strip_info->dev->name);
                spin_unlock_irqrestore(&strip_lock, flags);
                return -ENOMEM;
        }

        if (strip_info->sx_count) {
                if (strip_info->sx_count <= strip_info->sx_size)
                        memcpy(strip_info->sx_buff, osbuff,
                               strip_info->sx_count);
                else {
                        strip_info->discard = strip_info->sx_count;
                        strip_info->rx_over_errors++;
                }
        }

        if (strip_info->tx_left) {
                if (strip_info->tx_left <= strip_info->tx_size)
                        memcpy(strip_info->tx_buff, strip_info->tx_head,
                               strip_info->tx_left);
                else {
                        strip_info->tx_left = 0;
                        strip_info->tx_dropped++;
                }
        }
        strip_info->tx_head = strip_info->tx_buff;
        spin_unlock_irqrestore(&strip_lock, flags);

        printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
               strip_info->dev->name, old_mtu, strip_info->mtu);

        kfree(orbuff);
        kfree(osbuff);
        kfree(otbuff);
        return 0;
}

static void strip_unlock(struct strip *strip_info)
{
        /*
         * Set the timer to go off in one second.
         */
        strip_info->idle_timer.expires = jiffies + 1 * HZ;
        add_timer(&strip_info->idle_timer);
        netif_wake_queue(strip_info->dev);
}



/*
 * If the time is in the near future, time_delta prints the number of
 * seconds to go into the buffer and returns the address of the buffer.
 * If the time is not in the near future, it returns the address of the
 * string "Not scheduled" The buffer must be long enough to contain the
 * ascii representation of the number plus 9 charactes for the " seconds"
 * and the null character.
 */
#ifdef CONFIG_PROC_FS
static char *time_delta(char buffer[], long time)
{
        time -= jiffies;
        if (time > LongTime / 2)
                return ("Not scheduled");
        if (time < 0)
                time = 0;       /* Don't print negative times */
        sprintf(buffer, "%ld seconds", time / HZ);
        return (buffer);
}

/* get Nth element of the linked list */
static struct strip *strip_get_idx(loff_t pos) 
{
        struct strip *str;
        int i = 0;

        list_for_each_entry_rcu(str, &strip_list, list) {
                if (pos == i)
                        return str;
                ++i;
        }
        return NULL;
}

static void *strip_seq_start(struct seq_file *seq, loff_t *pos)
        __acquires(RCU)
{
        rcu_read_lock();
        return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN;
}

static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
        struct list_head *l;
        struct strip *s;

        ++*pos;
        if (v == SEQ_START_TOKEN)
                return strip_get_idx(1);

        s = v;
        l = &s->list;
        list_for_each_continue_rcu(l, &strip_list) {
                return list_entry(l, struct strip, list);
        }
        return NULL;
}

static void strip_seq_stop(struct seq_file *seq, void *v)
        __releases(RCU)
{
        rcu_read_unlock();
}

static void strip_seq_neighbours(struct seq_file *seq,
                           const MetricomNodeTable * table,
                           const char *title)
{
        unsigned long flags;
        struct timeval t;

        /*
         * We wrap this in a do/while loop, so if the table changes
         * while we're reading it, we just go around and try again.
         */
        do {
                int i;
                t = table->timestamp;
                if (table->num_nodes)
                        seq_printf(seq, "\n %s\n", title);
                for (i = 0; i < table->num_nodes; i++) {
                        MetricomNode node;

                        spin_lock_irqsave(&strip_lock, flags);
                        node = table->node[i];
                        spin_unlock_irqrestore(&strip_lock, flags);
                        seq_printf(seq, "  %s\n", node.c);
                }
        } while (table->timestamp.tv_sec != t.tv_sec
                 || table->timestamp.tv_usec != t.tv_usec);
}

/*
 * This function prints radio status information via the seq_file
 * interface.  The interface takes care of buffer size and over
 * run issues. 
 *
 * The buffer in seq_file is PAGESIZE (4K) 
 * so this routine should never print more or it will get truncated.
 * With the maximum of 32 portables and 32 poletops
 * reported, the routine outputs 3107 bytes into the buffer.
 */
static void strip_seq_status_info(struct seq_file *seq, 
                                  const struct strip *strip_info)
{
        char temp[32];
        MetricomAddressString addr_string;

        /* First, we must copy all of our data to a safe place, */
        /* in case a serial interrupt comes in and changes it.  */
        int tx_left = strip_info->tx_left;
        unsigned long rx_average_pps = strip_info->rx_average_pps;
        unsigned long tx_average_pps = strip_info->tx_average_pps;
        unsigned long sx_average_pps = strip_info->sx_average_pps;
        int working = strip_info->working;
        int firmware_level = strip_info->firmware_level;
        long watchdog_doprobe = strip_info->watchdog_doprobe;
        long watchdog_doreset = strip_info->watchdog_doreset;
        long gratuitous_arp = strip_info->gratuitous_arp;
        long arp_interval = strip_info->arp_interval;
        FirmwareVersion firmware_version = strip_info->firmware_version;
        SerialNumber serial_number = strip_info->serial_number;
        BatteryVoltage battery_voltage = strip_info->battery_voltage;
        char *if_name = strip_info->dev->name;
        MetricomAddress true_dev_addr = strip_info->true_dev_addr;
        MetricomAddress dev_dev_addr =
            *(MetricomAddress *) strip_info->dev->dev_addr;
        int manual_dev_addr = strip_info->manual_dev_addr;
#ifdef EXT_COUNTERS
        unsigned long rx_bytes = strip_info->rx_bytes;
        unsigned long tx_bytes = strip_info->tx_bytes;
        unsigned long rx_rbytes = strip_info->rx_rbytes;
        unsigned long tx_rbytes = strip_info->tx_rbytes;
        unsigned long rx_sbytes = strip_info->rx_sbytes;
        unsigned long tx_sbytes = strip_info->tx_sbytes;
        unsigned long rx_ebytes = strip_info->rx_ebytes;
        unsigned long tx_ebytes = strip_info->tx_ebytes;
#endif

        seq_printf(seq, "\nInterface name\t\t%s\n", if_name);
        seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No");
        radio_address_to_string(&true_dev_addr, &addr_string);
        seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c);
        if (manual_dev_addr) {
                radio_address_to_string(&dev_dev_addr, &addr_string);
                seq_printf(seq, " Device address:\t%s\n", addr_string.c);
        }
        seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" :
                     !firmware_level ? "Should be upgraded" :
                     firmware_version.c);
        if (firmware_level >= ChecksummedMessages)
                seq_printf(seq, " (Checksums Enabled)");
        seq_printf(seq, "\n");
        seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c);
        seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c);
        seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left);
        seq_printf(seq, " Receive packet rate:   %ld packets per second\n",
                     rx_average_pps / 8);
        seq_printf(seq, " Transmit packet rate:  %ld packets per second\n",
                     tx_average_pps / 8);
        seq_printf(seq, " Sent packet rate:      %ld packets per second\n",
                     sx_average_pps / 8);
        seq_printf(seq, " Next watchdog probe:\t%s\n",
                     time_delta(temp, watchdog_doprobe));
        seq_printf(seq, " Next watchdog reset:\t%s\n",
                     time_delta(temp, watchdog_doreset));
        seq_printf(seq, " Next gratuitous ARP:\t");

        if (!memcmp
            (strip_info->dev->dev_addr, zero_address.c,
             sizeof(zero_address)))
                seq_printf(seq, "Disabled\n");
        else {
                seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp));
                seq_printf(seq, " Next ARP interval:\t%ld seconds\n",
                             JIFFIE_TO_SEC(arp_interval));
        }

        if (working) {
#ifdef EXT_COUNTERS
                seq_printf(seq, "\n");
                seq_printf(seq,
                             " Total bytes:         \trx:\t%lu\ttx:\t%lu\n",
                             rx_bytes, tx_bytes);
                seq_printf(seq,
                             "  thru radio:         \trx:\t%lu\ttx:\t%lu\n",
                             rx_rbytes, tx_rbytes);
                seq_printf(seq,
                             "  thru serial port:   \trx:\t%lu\ttx:\t%lu\n",
                             rx_sbytes, tx_sbytes);
                seq_printf(seq,
                             " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n",
                             rx_ebytes, tx_ebytes);
#endif
                strip_seq_neighbours(seq, &strip_info->poletops,
                                        "Poletops:");
                strip_seq_neighbours(seq, &strip_info->portables,
                                        "Portables:");
        }
}

/*
 * This function is exports status information from the STRIP driver through
 * the /proc file system.
 */
static int strip_seq_show(struct seq_file *seq, void *v)
{
        if (v == SEQ_START_TOKEN)
                seq_printf(seq, "strip_version: %s\n", StripVersion);
        else
                strip_seq_status_info(seq, (const struct strip *)v);
        return 0;
}


static const struct seq_operations strip_seq_ops = {
        .start = strip_seq_start,
        .next  = strip_seq_next,
        .stop  = strip_seq_stop,
        .show  = strip_seq_show,
};

static int strip_seq_open(struct inode *inode, struct file *file)
{
        return seq_open(file, &strip_seq_ops);
}

static const struct file_operations strip_seq_fops = {
        .owner   = THIS_MODULE,
        .open    = strip_seq_open,
        .read    = seq_read,
        .llseek  = seq_lseek,
        .release = seq_release,
};
#endif



/************************************************************************/
/* Sending routines                                                     */

static void ResetRadio(struct strip *strip_info)
{
        struct tty_struct *tty = strip_info->tty;
        static const char init[] = "ate0q1dt**starmode\r**";
        StringDescriptor s = { init, sizeof(init) - 1 };

        /* 
         * If the radio isn't working anymore,
         * we should clear the old status information.
         */
        if (strip_info->working) {
                printk(KERN_INFO "%s: No response: Resetting radio.\n",
                       strip_info->dev->name);
                strip_info->firmware_version.c[0] = '\0';
                strip_info->serial_number.c[0] = '\0';
                strip_info->battery_voltage.c[0] = '\0';
                strip_info->portables.num_nodes = 0;
                do_gettimeofday(&strip_info->portables.timestamp);
                strip_info->poletops.num_nodes = 0;
                do_gettimeofday(&strip_info->poletops.timestamp);
        }

        strip_info->pps_timer = jiffies;
        strip_info->rx_pps_count = 0;
        strip_info->tx_pps_count = 0;
        strip_info->sx_pps_count = 0;
        strip_info->rx_average_pps = 0;
        strip_info->tx_average_pps = 0;
        strip_info->sx_average_pps = 0;

        /* Mark radio address as unknown */
        *(MetricomAddress *) & strip_info->true_dev_addr = zero_address;
        if (!strip_info->manual_dev_addr)
                *(MetricomAddress *) strip_info->dev->dev_addr =
                    zero_address;
        strip_info->working = FALSE;
        strip_info->firmware_level = NoStructure;
        strip_info->next_command = CompatibilityCommand;
        strip_info->watchdog_doprobe = jiffies + 10 * HZ;
        strip_info->watchdog_doreset = jiffies + 1 * HZ;

        /* If the user has selected a baud rate above 38.4 see what magic we have to do */
        if (strip_info->user_baud > 38400) {
                /*
                 * Subtle stuff: Pay attention :-)
                 * If the serial port is currently at the user's selected (>38.4) rate,
                 * then we temporarily switch to 19.2 and issue the ATS304 command
                 * to tell the radio to switch to the user's selected rate.
                 * If the serial port is not currently at that rate, that means we just
                 * issued the ATS304 command last time through, so this time we restore
                 * the user's selected rate and issue the normal starmode reset string.
                 */
                if (strip_info->user_baud == tty_get_baud_rate(tty)) {
                        static const char b0[] = "ate0q1s304=57600\r";
                        static const char b1[] = "ate0q1s304=115200\r";
                        static const StringDescriptor baudstring[2] =
                            { {b0, sizeof(b0) - 1}
                        , {b1, sizeof(b1) - 1}
                        };
                        set_baud(tty, 19200);
                        if (strip_info->user_baud == 57600)
                                s = baudstring[0];
                        else if (strip_info->user_baud == 115200)
                                s = baudstring[1];
                        else
                                s = baudstring[1];      /* For now */
                } else
                        set_baud(tty, strip_info->user_baud);
        }

        tty->ops->write(tty, s.string, s.length);
#ifdef EXT_COUNTERS
        strip_info->tx_ebytes += s.length;
#endif
}

/*
 * Called by the driver when there's room for more data.  If we have
 * more packets to send, we send them here.
 */

static void strip_write_some_more(struct tty_struct *tty)
{
        struct strip *strip_info = tty->disc_data;

        /* First make sure we're connected. */
        if (!strip_info || strip_info->magic != STRIP_MAGIC ||
            !netif_running(strip_info->dev))
                return;

        if (strip_info->tx_left > 0) {
                int num_written =
                    tty->ops->write(tty, strip_info->tx_head,
                                      strip_info->tx_left);
                strip_info->tx_left -= num_written;
                strip_info->tx_head += num_written;
#ifdef EXT_COUNTERS
                strip_info->tx_sbytes += num_written;
#endif
        } else {                /* Else start transmission of another packet */

                clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
                strip_unlock(strip_info);
        }
}

static __u8 *add_checksum(__u8 * buffer, __u8 * end)
{
        __u16 sum = 0;
        __u8 *p = buffer;
        while (p < end)
                sum += *p++;
        end[3] = hextable[sum & 0xF];
        sum >>= 4;
        end[2] = hextable[sum & 0xF];
        sum >>= 4;
        end[1] = hextable[sum & 0xF];
        sum >>= 4;
        end[0] = hextable[sum & 0xF];
        return (end + 4);
}

static unsigned char *strip_make_packet(unsigned char *buffer,
                                        struct strip *strip_info,
                                        struct sk_buff *skb)
{
        __u8 *ptr = buffer;
        __u8 *stuffstate = NULL;
        STRIP_Header *header = (STRIP_Header *) skb->data;
        MetricomAddress haddr = header->dst_addr;
        int len = skb->len - sizeof(STRIP_Header);
        MetricomKey key;

        /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */

        if (header->protocol == htons(ETH_P_IP))
                key = SIP0Key;
        else if (header->protocol == htons(ETH_P_ARP))
                key = ARP0Key;
        else {
                printk(KERN_ERR
                       "%s: strip_make_packet: Unknown packet type 0x%04X\n",
                       strip_info->dev->name, ntohs(header->protocol));
                return (NULL);
        }

        if (len > strip_info->mtu) {
                printk(KERN_ERR
                       "%s: Dropping oversized transmit packet: %d bytes\n",
                       strip_info->dev->name, len);
                return (NULL);
        }

        /*
         * If we're sending to ourselves, discard the packet.
         * (Metricom radios choke if they try to send a packet to their own address.)
         */
        if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) {
                printk(KERN_ERR "%s: Dropping packet addressed to self\n",
                       strip_info->dev->name);
                return (NULL);
        }

        /*
         * If this is a broadcast packet, send it to our designated Metricom
         * 'broadcast hub' radio (First byte of address being 0xFF means broadcast)
         */
        if (haddr.c[0] == 0xFF) {
                __be32 brd = 0;
                struct in_device *in_dev;

                rcu_read_lock();
                in_dev = __in_dev_get_rcu(strip_info->dev);
                if (in_dev == NULL) {
                        rcu_read_unlock();
                        return NULL;
                }
                if (in_dev->ifa_list)
                        brd = in_dev->ifa_list->ifa_broadcast;
                rcu_read_unlock();

                /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
                if (!arp_query(haddr.c, brd, strip_info->dev)) {
                        printk(KERN_ERR
                               "%s: Unable to send packet (no broadcast hub configured)\n",
                               strip_info->dev->name);
                        return (NULL);
                }
                /*
                 * If we are the broadcast hub, don't bother sending to ourselves.
                 * (Metricom radios choke if they try to send a packet to their own address.)
                 */
                if (!memcmp
                    (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr)))
                        return (NULL);
        }

        *ptr++ = 0x0D;
        *ptr++ = '*';
        *ptr++ = hextable[haddr.c[2] >> 4];
        *ptr++ = hextable[haddr.c[2] & 0xF];
        *ptr++ = hextable[haddr.c[3] >> 4];
        *ptr++ = hextable[haddr.c[3] & 0xF];
        *ptr++ = '-';
        *ptr++ = hextable[haddr.c[4] >> 4];
        *ptr++ = hextable[haddr.c[4] & 0xF];
        *ptr++ = hextable[haddr.c[5] >> 4];
        *ptr++ = hextable[haddr.c[5] & 0xF];
        *ptr++ = '*';
        *ptr++ = key.c[0];
        *ptr++ = key.c[1];
        *ptr++ = key.c[2];
        *ptr++ = key.c[3];

        ptr =
            StuffData(skb->data + sizeof(STRIP_Header), len, ptr,
                      &stuffstate);

        if (strip_info->firmware_level >= ChecksummedMessages)
                ptr = add_checksum(buffer + 1, ptr);

        *ptr++ = 0x0D;
        return (ptr);
}

static void strip_send(struct strip *strip_info, struct sk_buff *skb)
{
        MetricomAddress haddr;
        unsigned char *ptr = strip_info->tx_buff;
        int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0;
        int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0
            && !doreset;
        __be32 addr, brd;

        /*
         * 1. If we have a packet, encapsulate it and put it in the buffer
         */
        if (skb) {
                char *newptr = strip_make_packet(ptr, strip_info, skb);
                strip_info->tx_pps_count++;
                if (!newptr)
                        strip_info->tx_dropped++;
                else {
                        ptr = newptr;
                        strip_info->sx_pps_count++;
                        strip_info->tx_packets++;       /* Count another successful packet */
#ifdef EXT_COUNTERS
                        strip_info->tx_bytes += skb->len;
                        strip_info->tx_rbytes += ptr - strip_info->tx_buff;
#endif
                        /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */
                        /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */
                }
        }

        /*
         * 2. If it is time for another tickle, tack it on, after the packet
         */
        if (doprobe) {
                StringDescriptor ts = CommandString[strip_info->next_command];
#if TICKLE_TIMERS
                {
                        struct timeval tv;
                        do_gettimeofday(&tv);
                        printk(KERN_INFO "**** Sending tickle string %d      at %02d.%06d\n",
                               strip_info->next_command, tv.tv_sec % 100,
                               tv.tv_usec);
                }
#endif
                if (ptr == strip_info->tx_buff)
                        *ptr++ = 0x0D;

                *ptr++ = '*';   /* First send "**" to provoke an error message */
                *ptr++ = '*';

                /* Then add the command */
                memcpy(ptr, ts.string, ts.length);

                /* Add a checksum ? */
                if (strip_info->firmware_level < ChecksummedMessages)
                        ptr += ts.length;
                else
                        ptr = add_checksum(ptr, ptr + ts.length);

                *ptr++ = 0x0D;  /* Terminate the command with a <CR> */

                /* Cycle to next periodic command? */
                if (strip_info->firmware_level >= StructuredMessages)
                        if (++strip_info->next_command >=
                            ARRAY_SIZE(CommandString))
                                strip_info->next_command = 0;
#ifdef EXT_COUNTERS
                strip_info->tx_ebytes += ts.length;
#endif
                strip_info->watchdog_doprobe = jiffies + 10 * HZ;
                strip_info->watchdog_doreset = jiffies + 1 * HZ;
                /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
        }

        /*
         * 3. Set up the strip_info ready to send the data (if any).
         */
        strip_info->tx_head = strip_info->tx_buff;
        strip_info->tx_left = ptr - strip_info->tx_buff;
        set_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags);
        /*
         * 4. Debugging check to make sure we're not overflowing the buffer.
         */
        if (strip_info->tx_size - strip_info->tx_left < 20)
                printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n",
                       strip_info->dev->name, strip_info->tx_left,
                       strip_info->tx_size - strip_info->tx_left);

        /*
         * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in
         * the buffer, strip_write_some_more will send it after the reset has finished
         */
        if (doreset) {
                ResetRadio(strip_info);
                return;
        }

        if (1) {
                struct in_device *in_dev;

                brd = addr = 0;
                rcu_read_lock();
                in_dev = __in_dev_get_rcu(strip_info->dev);
                if (in_dev) {
                        if (in_dev->ifa_list) {
                                brd = in_dev->ifa_list->ifa_broadcast;
                                addr = in_dev->ifa_list->ifa_local;
                        }
                }
                rcu_read_unlock();
        }


        /*
         * 6. If it is time for a periodic ARP, queue one up to be sent.
         * We only do this if:
         *  1. The radio is working
         *  2. It's time to send another periodic ARP
         *  3. We really know what our address is (and it is not manually set to zero)
         *  4. We have a designated broadcast address configured
         * If we queue up an ARP packet when we don't have a designated broadcast
         * address configured, then the packet will just have to be discarded in
         * strip_make_packet. This is not fatal, but it causes misleading information
         * to be displayed in tcpdump. tcpdump will report that periodic APRs are
         * being sent, when in fact they are not, because they are all being dropped
         * in the strip_make_packet routine.
         */
        if (strip_info->working
            && (long) jiffies - strip_info->gratuitous_arp >= 0
            && memcmp(strip_info->dev->dev_addr, zero_address.c,
                      sizeof(zero_address))
            && arp_query(haddr.c, brd, strip_info->dev)) {
                /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
                   strip_info->dev->name, strip_info->arp_interval / HZ); */
                strip_info->gratuitous_arp =
                    jiffies + strip_info->arp_interval;
                strip_info->arp_interval *= 2;
                if (strip_info->arp_interval > MaxARPInterval)
                        strip_info->arp_interval = MaxARPInterval;
                if (addr)
                        arp_send(ARPOP_REPLY, ETH_P_ARP, addr,  /* Target address of ARP packet is our address */
                                 strip_info->dev,       /* Device to send packet on */
                                 addr,  /* Source IP address this ARP packet comes from */
                                 NULL,  /* Destination HW address is NULL (broadcast it) */
                                 strip_info->dev->dev_addr,     /* Source HW address is our HW address */
                                 strip_info->dev->dev_addr);    /* Target HW address is our HW address (redundant) */
        }

        /*
         * 7. All ready. Start the transmission
         */
        strip_write_some_more(strip_info->tty);
}

/* Encapsulate a datagram and kick it into a TTY queue. */
static int strip_xmit(struct sk_buff *skb, struct net_device *dev)
{
        struct strip *strip_info = netdev_priv(dev);
        unsigned long flags;

        if (!netif_running(dev)) {
                printk(KERN_ERR "%s: xmit call when iface is down\n",
                       dev->name);
                return NETDEV_TX_BUSY;
        }

        netif_stop_queue(dev);

        del_timer(&strip_info->idle_timer);


        if (time_after(jiffies, strip_info->pps_timer + HZ)) {
                unsigned long t = jiffies - strip_info->pps_timer;
                unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t;
                unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t;
                unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t;

                strip_info->pps_timer = jiffies;
                strip_info->rx_pps_count = 0;
                strip_info->tx_pps_count = 0;
                strip_info->sx_pps_count = 0;

                strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2;
                strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2;
                strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2;

                if (rx_pps_count / 8 >= 10)
                        printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n",
                               strip_info->dev->name, rx_pps_count / 8);
                if (tx_pps_count / 8 >= 10)
                        printk(KERN_INFO "%s: WARNING: Tx        %ld packets per second.\n",
                               strip_info->dev->name, tx_pps_count / 8);
                if (sx_pps_count / 8 >= 10)
                        printk(KERN_INFO "%s: WARNING: Sending   %ld packets per second.\n",
                               strip_info->dev->name, sx_pps_count / 8);
        }

        spin_lock_irqsave(&strip_lock, flags);

        strip_send(strip_info, skb);

        spin_unlock_irqrestore(&strip_lock, flags);

        if (skb)
                dev_kfree_skb(skb);
        return 0;
}

/*
 * IdleTask periodically calls strip_xmit, so even when we have no IP packets
 * to send for an extended period of time, the watchdog processing still gets
 * done to ensure that the radio stays in Starmode
 */

static void strip_IdleTask(unsigned long parameter)
{
        strip_xmit(NULL, (struct net_device *) parameter);
}

/*
 * Create the MAC header for an arbitrary protocol layer
 *
 * saddr!=NULL        means use this specific address (n/a for Metricom)
 * saddr==NULL        means use default device source address
 * daddr!=NULL        means use this destination address
 * daddr==NULL        means leave destination address alone
 *                 (e.g. unresolved arp -- kernel will call
 *                 rebuild_header later to fill in the address)
 */

static int strip_header(struct sk_buff *skb, struct net_device *dev,
                        unsigned short type, const void *daddr,
                        const void *saddr, unsigned len)
{
        struct strip *strip_info = netdev_priv(dev);
        STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header));

        /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type,
           type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */

        header->src_addr = strip_info->true_dev_addr;
        header->protocol = htons(type);

        /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */

        if (!daddr)
                return (-dev->hard_header_len);

        header->dst_addr = *(MetricomAddress *) daddr;
        return (dev->hard_header_len);
}

/*
 * Rebuild the MAC header. This is called after an ARP
 * (or in future other address resolution) has completed on this
 * sk_buff. We now let ARP fill in the other fields.
 * I think this should return zero if packet is ready to send,
 * or non-zero if it needs more time to do an address lookup
 */

static int strip_rebuild_header(struct sk_buff *skb)
{
#ifdef CONFIG_INET
        STRIP_Header *header = (STRIP_Header *) skb->data;

        /* Arp find returns zero if if knows the address, */
        /* or if it doesn't know the address it sends an ARP packet and returns non-zero */
        return arp_find(header->dst_addr.c, skb) ? 1 : 0;
#else
        return 0;
#endif
}


/************************************************************************/
/* Receiving routines                                                   */

/*
 * This function parses the response to the ATS300? command,
 * extracting the radio version and serial number.
 */
static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end)
{
        __u8 *p, *value_begin, *value_end;
        int len;

        /* Determine the beginning of the second line of the payload */
        p = ptr;
        while (p < end && *p != 10)
                p++;
        if (p >= end)
                return;
        p++;
        value_begin = p;

        /* Determine the end of line */
        while (p < end && *p != 10)
                p++;
        if (p >= end)
                return;
        value_end = p;
        p++;

        len = value_end - value_begin;
        len = min_t(int, len, sizeof(FirmwareVersion) - 1);
        if (strip_info->firmware_version.c[0] == 0)
                printk(KERN_INFO "%s: Radio Firmware: %.*s\n",
                       strip_info->dev->name, len, value_begin);
        sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin);

        /* Look for the first colon */
        while (p < end && *p != ':')
                p++;
        if (p >= end)
                return;
        /* Skip over the space */
        p += 2;
        len = sizeof(SerialNumber) - 1;
        if (p + len <= end) {
                sprintf(strip_info->serial_number.c, "%.*s", len, p);
        } else {
                printk(KERN_DEBUG
                       "STRIP: radio serial number shorter (%zd) than expected (%d)\n",
                       end - p, len);
        }
}

/*
 * This function parses the response to the ATS325? command,
 * extracting the radio battery voltage.
 */
static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end)
{
        int len;

        len = sizeof(BatteryVoltage) - 1;
        if (ptr + len <= end) {
                sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr);
        } else {
                printk(KERN_DEBUG
                       "STRIP: radio voltage string shorter (%zd) than expected (%d)\n",
                       end - ptr, len);
        }
}

/*
 * This function parses the responses to the AT~LA and ATS311 commands,
 * which list the radio's neighbours.
 */
static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end)
{
        table->num_nodes = 0;
        while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) {
                MetricomNode *node = &table->node[table->num_nodes++];
                char *dst = node->c, *limit = dst + sizeof(*node) - 1;
                while (ptr < end && *ptr <= 32)
                        ptr++;
                while (ptr < end && dst < limit && *ptr != 10)
                        *dst++ = *ptr++;
                *dst++ = 0;
                while (ptr < end && ptr[-1] != 10)
                        ptr++;
        }
        do_gettimeofday(&table->timestamp);
}

static int get_radio_address(struct strip *strip_info, __u8 * p)
{
        MetricomAddress addr;

        if (string_to_radio_address(&addr, p))
                return (1);

        /* See if our radio address has changed */
        if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) {
                MetricomAddressString addr_string;
                radio_address_to_string(&addr, &addr_string);
                printk(KERN_INFO "%s: Radio address = %s\n",
                       strip_info->dev->name, addr_string.c);
                strip_info->true_dev_addr = addr;
                if (!strip_info->manual_dev_addr)
                        *(MetricomAddress *) strip_info->dev->dev_addr =
                            addr;
                /* Give the radio a few seconds to get its head straight, then send an arp */
                strip_info->gratuitous_arp = jiffies + 15 * HZ;
                strip_info->arp_interval = 1 * HZ;
        }
        return (0);
}

static int verify_checksum(struct strip *strip_info)
{
        __u8 *p = strip_info->sx_buff;
        __u8 *end = strip_info->sx_buff + strip_info->sx_count - 4;
        u_short sum =
            (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) |
            (READHEX16(end[2]) << 4) | (READHEX16(end[3]));
        while (p < end)
                sum -= *p++;
        if (sum == 0 && strip_info->firmware_level == StructuredMessages) {
                strip_info->firmware_level = ChecksummedMessages;
                printk(KERN_INFO "%s: Radio provides message checksums\n",
                       strip_info->dev->name);
        }
        return (sum == 0);
}

static void RecvErr(char *msg, struct strip *strip_info)
{
        __u8 *ptr = strip_info->sx_buff;
        __u8 *end = strip_info->sx_buff + strip_info->sx_count;
        DumpData(msg, strip_info, ptr, end);
        strip_info->rx_errors++;
}

static void RecvErr_Message(struct strip *strip_info, __u8 * sendername,
                            const __u8 * msg, u_long len)
{
        if (has_prefix(msg, len, "001")) {      /* Not in StarMode! */
                RecvErr("Error Msg:", strip_info);
                printk(KERN_INFO "%s: Radio %s is not in StarMode\n",
                       strip_info->dev->name, sendername);
        }

        else if (has_prefix(msg, len, "002")) { /* Remap handle */
                /* We ignore "Remap handle" messages for now */
        }

        else if (has_prefix(msg, len, "003")) { /* Can't resolve name */
                RecvErr("Error Msg:", strip_info);
                printk(KERN_INFO "%s: Destination radio name is unknown\n",
                       strip_info->dev->name);
        }

        else if (has_prefix(msg, len, "004")) { /* Name too small or missing */
                strip_info->watchdog_doreset = jiffies + LongTime;
#if TICKLE_TIMERS
                {
                        struct timeval tv;
                        do_gettimeofday(&tv);
                        printk(KERN_INFO
                               "**** Got ERR_004 response         at %02d.%06d\n",
                               tv.tv_sec % 100, tv.tv_usec);
                }
#endif
                if (!strip_info->working) {
                        strip_info->working = TRUE;
                        printk(KERN_INFO "%s: Radio now in starmode\n",
                               strip_info->dev->name);
                        /*
                         * If the radio has just entered a working state, we should do our first
                         * probe ASAP, so that we find out our radio address etc. without delay.
                         */
                        strip_info->watchdog_doprobe = jiffies;
                }
                if (strip_info->firmware_level == NoStructure && sendername) {
                        strip_info->firmware_level = StructuredMessages;
                        strip_info->next_command = 0;   /* Try to enable checksums ASAP */
                        printk(KERN_INFO
                               "%s: Radio provides structured messages\n",
                               strip_info->dev->name);
                }
                if (strip_info->firmware_level >= StructuredMessages) {
                        /*
                         * If this message has a valid checksum on the end, then the call to verify_checksum
                         * will elevate the firmware_level to ChecksummedMessages for us. (The actual return
                         * code from verify_checksum is ignored here.)
                         */
                        verify_checksum(strip_info);
                        /*
                         * If the radio has structured messages but we don't yet have all our information about it,
                         * we should do probes without delay, until we have gathered all the information
                         */
                        if (!GOT_ALL_RADIO_INFO(strip_info))
                                strip_info->watchdog_doprobe = jiffies;
                }
        }

        else if (has_prefix(msg, len, "005"))   /* Bad count specification */
                RecvErr("Error Msg:", strip_info);

        else if (has_prefix(msg, len, "006"))   /* Header too big */
                RecvErr("Error Msg:", strip_info);

        else if (has_prefix(msg, len, "007")) { /* Body too big */
                RecvErr("Error Msg:", strip_info);
                printk(KERN_ERR
                       "%s: Error! Packet size too big for radio.\n",
                       strip_info->dev->name);
        }

        else if (has_prefix(msg, len, "008")) { /* Bad character in name */
                RecvErr("Error Msg:", strip_info);
                printk(KERN_ERR
                       "%s: Radio name contains illegal character\n",
                       strip_info->dev->name);
        }

        else if (has_prefix(msg, len, "009"))   /* No count or line terminator */
                RecvErr("Error Msg:", strip_info);

        else if (has_prefix(msg, len, "010"))   /* Invalid checksum */
                RecvErr("Error Msg:", strip_info);

        else if (has_prefix(msg, len, "011"))   /* Checksum didn't match */
                RecvErr("Error Msg:", strip_info);

        else if (has_prefix(msg, len, "012"))   /* Failed to transmit packet */
                RecvErr("Error Msg:", strip_info);

        else
                RecvErr("Error Msg:", strip_info);
}

static void process_AT_response(struct strip *strip_info, __u8 * ptr,
                                __u8 * end)
{
        u_long len;
        __u8 *p = ptr;
        while (p < end && p[-1] != 10)
                p++;            /* Skip past first newline character */
        /* Now ptr points to the AT command, and p points to the text of the response. */
        len = p - ptr;

#if TICKLE_TIMERS
        {
                struct timeval tv;
                do_gettimeofday(&tv);
                printk(KERN_INFO "**** Got AT response %.7s      at %02d.%06d\n",
                       ptr, tv.tv_sec % 100, tv.tv_usec);
        }
#endif

        if (has_prefix(ptr, len, "ATS300?"))
                get_radio_version(strip_info, p, end);
        else if (has_prefix(ptr, len, "ATS305?"))
                get_radio_address(strip_info, p);
        else if (has_prefix(ptr, len, "ATS311?"))
                get_radio_neighbours(&strip_info->poletops, p, end);
        else if (has_prefix(ptr, len, "ATS319=7"))
                verify_checksum(strip_info);
        else if (has_prefix(ptr, len, "ATS325?"))
                get_radio_voltage(strip_info, p, end);
        else if (has_prefix(ptr, len, "AT~LA"))
                get_radio_neighbours(&strip_info->portables, p, end);
        else
                RecvErr("Unknown AT Response:", strip_info);
}

static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end)
{
        /* Currently we don't do anything with ACKs from the radio */
}

static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end)
{
        if (ptr + 16 > end)
                RecvErr("Bad Info Msg:", strip_info);
}

static struct net_device *get_strip_dev(struct strip *strip_info)
{
        /* If our hardware address is *manually set* to zero, and we know our */
        /* real radio hardware address, try to find another strip device that has been */
        /* manually set to that address that we can 'transfer ownership' of this packet to  */
        if (strip_info->manual_dev_addr &&
            !memcmp(strip_info->dev->dev_addr, zero_address.c,
                    sizeof(zero_address))
            && memcmp(&strip_info->true_dev_addr, zero_address.c,
                      sizeof(zero_address))) {
                struct net_device *dev;
                read_lock_bh(&dev_base_lock);
                for_each_netdev(&init_net, dev) {
                        if (dev->type == strip_info->dev->type &&
                            !memcmp(dev->dev_addr,
                                    &strip_info->true_dev_addr,
                                    sizeof(MetricomAddress))) {
                                printk(KERN_INFO
                                       "%s: Transferred packet ownership to %s.\n",
                                       strip_info->dev->name, dev->name);
                                read_unlock_bh(&dev_base_lock);
                                return (dev);
                        }
                }
                read_unlock_bh(&dev_base_lock);
        }
        return (strip_info->dev);
}

/*
 * Send one completely decapsulated datagram to the next layer.
 */

static void deliver_packet(struct strip *strip_info, STRIP_Header * header,
                           __u16 packetlen)
{
        struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen);
        if (!skb) {
                printk(KERN_ERR "%s: memory squeeze, dropping packet.\n",
                       strip_info->dev->name);
                strip_info->rx_dropped++;
        } else {
                memcpy(skb_put(skb, sizeof(STRIP_Header)), header,
                       sizeof(STRIP_Header));
                memcpy(skb_put(skb, packetlen), strip_info->rx_buff,
                       packetlen);
                skb->dev = get_strip_dev(strip_info);
                skb->protocol = header->protocol;
                skb_reset_mac_header(skb);

                /* Having put a fake header on the front of the sk_buff for the */
                /* benefit of tools like tcpdump, skb_pull now 'consumes' that  */
                /* fake header before we hand the packet up to the next layer.  */
                skb_pull(skb, sizeof(STRIP_Header));

                /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */
                strip_info->rx_packets++;
                strip_info->rx_pps_count++;
#ifdef EXT_COUNTERS
                strip_info->rx_bytes += packetlen;
#endif
                netif_rx(skb);
        }
}

static void process_IP_packet(struct strip *strip_info,
                              STRIP_Header * header, __u8 * ptr,
                              __u8 * end)
{
        __u16 packetlen;

        /* Decode start of the IP packet header */
        ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4);
        if (!ptr) {
                RecvErr("IP Packet too short", strip_info);
                return;
        }

        packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3];

        if (packetlen > MAX_RECV_MTU) {
                printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n",
                       strip_info->dev->name, packetlen);
                strip_info->rx_dropped++;
                return;
        }

        /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */

        /* Decode remainder of the IP packet */
        ptr =
            UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4);
        if (!ptr) {
                RecvErr("IP Packet too short", strip_info);
                return;
        }

        if (ptr < end) {
                RecvErr("IP Packet too long", strip_info);
                return;
        }

        header->protocol = htons(ETH_P_IP);

        deliver_packet(strip_info, header, packetlen);
}

static void process_ARP_packet(struct strip *strip_info,
                               STRIP_Header * header, __u8 * ptr,
                               __u8 * end)
{
        __u16 packetlen;
        struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff;

        /* Decode start of the ARP packet */
        ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8);
        if (!ptr) {
                RecvErr("ARP Packet too short", strip_info);
                return;
        }

        packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2;

        if (packetlen > MAX_RECV_MTU) {
                printk(KERN_INFO
                       "%s: Dropping oversized received ARP packet: %d bytes\n",
                       strip_info->dev->name, packetlen);
                strip_info->rx_dropped++;
                return;
        }

        /*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
           strip_info->dev->name, packetlen,
           ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */

        /* Decode remainder of the ARP packet */
        ptr =
            UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8);
        if (!ptr) {
                RecvErr("ARP Packet too short", strip_info);
                return;
        }

        if (ptr < end) {
                RecvErr("ARP Packet too long", strip_info);
                return;
        }

        header->protocol = htons(ETH_P_ARP);

        deliver_packet(strip_info, header, packetlen);
}

/*
 * process_text_message processes a <CR>-terminated block of data received
 * from the radio that doesn't begin with a '*' character. All normal
 * Starmode communication messages with the radio begin with a '*',
 * so any text that does not indicates a serial port error, a radio that
 * is in Hayes command mode instead of Starmode, or a radio with really
 * old firmware that doesn't frame its Starmode responses properly.
 */
static void process_text_message(struct strip *strip_info)
{
        __u8 *msg = strip_info->sx_buff;
        int len = strip_info->sx_count;

        /* Check for anything that looks like it might be our radio name */
        /* (This is here for backwards compatibility with old firmware)  */
        if (len == 9 && get_radio_address(strip_info, msg) == 0)
                return;

        if (text_equal(msg, len, "OK"))
                return;         /* Ignore 'OK' responses from prior commands */
        if (text_equal(msg, len, "ERROR"))
                return;         /* Ignore 'ERROR' messages */
        if (has_prefix(msg, len, "ate0q1"))
                return;         /* Ignore character echo back from the radio */

        /* Catch other error messages */
        /* (This is here for backwards compatibility with old firmware) */
        if (has_prefix(msg, len, "ERR_")) {
                RecvErr_Message(strip_info, NULL, &msg[4], len - 4);
                return;
        }

        RecvErr("No initial *", strip_info);
}

/*
 * process_message processes a <CR>-terminated block of data received
 * from the radio. If the radio is not in Starmode or has old firmware,
 * it may be a line of text in response to an AT command. Ideally, with
 * a current radio that's properly in Starmode, all data received should
 * be properly framed and checksummed radio message blocks, containing
 * either a starmode packet, or a other communication from the radio
 * firmware, like "INF_" Info messages and &COMMAND responses.
 */
static void process_message(struct strip *strip_info)
{
        STRIP_Header header = { zero_address, zero_address, 0 };
        __u8 *ptr = strip_info->sx_buff;
        __u8 *end = strip_info->sx_buff + strip_info->sx_count;
        __u8 sendername[32], *sptr = sendername;
        MetricomKey key;

        /*HexDump("Receiving", strip_info, ptr, end); */

        /* Check for start of address marker, and then skip over it */
        if (*ptr == '*')
                ptr++;
        else {
                process_text_message(strip_info);
                return;
        }

        /* Copy out the return address */
        while (ptr < end && *ptr != '*'
               && sptr < ARRAY_END(sendername) - 1)
                *sptr++ = *ptr++;
        *sptr = 0;              /* Null terminate the sender name */

        /* Check for end of address marker, and skip over it */
        if (ptr >= end || *ptr != '*') {
                RecvErr("No second *", strip_info);
                return;
        }
        ptr++;                  /* Skip the second '*' */

        /* If the sender name is "&COMMAND", ignore this 'packet'       */
        /* (This is here for backwards compatibility with old firmware) */
        if (!strcmp(sendername, "&COMMAND")) {
                strip_info->firmware_level = NoStructure;
                strip_info->next_command = CompatibilityCommand;
                return;
        }

        if (ptr + 4 > end) {
                RecvErr("No proto key", strip_info);
                return;
        }

        /* Get the protocol key out of the buffer */
        key.c[0] = *ptr++;
        key.c[1] = *ptr++;
        key.c[2] = *ptr++;
        key.c[3] = *ptr++;

        /* If we're using checksums, verify the checksum at the end of the packet */
        if (strip_info->firmware_level >= ChecksummedMessages) {
                end -= 4;       /* Chop the last four bytes off the packet (they're the checksum) */
                if (ptr > end) {
                        RecvErr("Missing Checksum", strip_info);
                        return;
                }
                if (!verify_checksum(strip_info)) {
                        RecvErr("Bad Checksum", strip_info);
                        return;
                }
        }

        /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */

        /*
         * Fill in (pseudo) source and destination addresses in the packet.
         * We assume that the destination address was our address (the radio does not
         * tell us this). If the radio supplies a source address, then we use it.
         */
        header.dst_addr = strip_info->true_dev_addr;
        string_to_radio_address(&header.src_addr, sendername);

#ifdef EXT_COUNTERS
        if (key.l == SIP0Key.l) {
                strip_info->rx_rbytes += (end - ptr);
                process_IP_packet(strip_info, &header, ptr, end);
        } else if (key.l == ARP0Key.l) {
                strip_info->rx_rbytes += (end - ptr);
                process_ARP_packet(strip_info, &header, ptr, end);
        } else if (key.l == ATR_Key.l) {
                strip_info->rx_ebytes += (end - ptr);
                process_AT_response(strip_info, ptr, end);
        } else if (key.l == ACK_Key.l) {
                strip_info->rx_ebytes += (end - ptr);
                process_ACK(strip_info, ptr, end);
        } else if (key.l == INF_Key.l) {
                strip_info->rx_ebytes += (end - ptr);
                process_Info(strip_info, ptr, end);
        } else if (key.l == ERR_Key.l) {
                strip_info->rx_ebytes += (end - ptr);
                RecvErr_Message(strip_info, sendername, ptr, end - ptr);
        } else
                RecvErr("Unrecognized protocol key", strip_info);
#else
        if (key.l == SIP0Key.l)
                process_IP_packet(strip_info, &header, ptr, end);
        else if (key.l == ARP0Key.l)
                process_ARP_packet(strip_info, &header, ptr, end);
        else if (key.l == ATR_Key.l)
                process_AT_response(strip_info, ptr, end);
        else if (key.l == ACK_Key.l)
                process_ACK(strip_info, ptr, end);
        else if (key.l == INF_Key.l)
                process_Info(strip_info, ptr, end);
        else if (key.l == ERR_Key.l)
                RecvErr_Message(strip_info, sendername, ptr, end - ptr);
        else
                RecvErr("Unrecognized protocol key", strip_info);
#endif
}

#define TTYERROR(X) ((X) == TTY_BREAK   ? "Break"            : \
                     (X) == TTY_FRAME   ? "Framing Error"    : \
                     (X) == TTY_PARITY  ? "Parity Error"     : \
                     (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error")

/*
 * Handle the 'receiver data ready' interrupt.
 * This function is called by the 'tty_io' module in the kernel when
 * a block of STRIP data has been received, which can now be decapsulated
 * and sent on to some IP layer for further processing.
 */

static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
                  char *fp, int count)
{
        struct strip *strip_info = tty->disc_data;
        const unsigned char *end = cp + count;
        unsigned long flags;

        if (!strip_info || strip_info->magic != STRIP_MAGIC
            || !netif_running(strip_info->dev))
                return;

        spin_lock_irqsave(&strip_lock, flags);
#if 0
        {
                struct timeval tv;
                do_gettimeofday(&tv);
                printk(KERN_INFO
                       "**** strip_receive_buf: %3d bytes at %02d.%06d\n",
                       count, tv.tv_sec % 100, tv.tv_usec);
        }
#endif

#ifdef EXT_COUNTERS
        strip_info->rx_sbytes += count;
#endif

        /* Read the characters out of the buffer */
        while (cp < end) {
                if (fp && *fp)
                        printk(KERN_INFO "%s: %s on serial port\n",
                               strip_info->dev->name, TTYERROR(*fp));
                if (fp && *fp++ && !strip_info->discard) {      /* If there's a serial error, record it */
                        /* If we have some characters in the buffer, discard them */
                        strip_info->discard = strip_info->sx_count;
                        strip_info->rx_errors++;
                }

                /* Leading control characters (CR, NL, Tab, etc.) are ignored */
                if (strip_info->sx_count > 0 || *cp >= ' ') {
                        if (*cp == 0x0D) {      /* If end of packet, decide what to do with it */
                                if (strip_info->sx_count > 3000)
                                        printk(KERN_INFO
                                               "%s: Cut a %d byte packet (%zd bytes remaining)%s\n",
                                               strip_info->dev->name,
                                               strip_info->sx_count,
                                               end - cp - 1,
                                               strip_info->
                                               discard ? " (discarded)" :
                                               "");
                                if (strip_info->sx_count >
                                    strip_info->sx_size) {
                                        strip_info->rx_over_errors++;
                                        printk(KERN_INFO
                                               "%s: sx_buff overflow (%d bytes total)\n",
                                               strip_info->dev->name,
                                               strip_info->sx_count);
                                } else if (strip_info->discard)
                                        printk(KERN_INFO
                                               "%s: Discarding bad packet (%d/%d)\n",
                                               strip_info->dev->name,
                                               strip_info->discard,
                                               strip_info->sx_count);
                                else
                                        process_message(strip_info);
                                strip_info->discard = 0;
                                strip_info->sx_count = 0;
                        } else {
                                /* Make sure we have space in the buffer */
                                if (strip_info->sx_count <
                                    strip_info->sx_size)
                                        strip_info->sx_buff[strip_info->
                                                            sx_count] =
                                            *cp;
                                strip_info->sx_count++;
                        }
                }
                cp++;
        }
        spin_unlock_irqrestore(&strip_lock, flags);
}


/************************************************************************/
/* General control routines                                             */

static int set_mac_address(struct strip *strip_info,
                           MetricomAddress * addr)
{
        /*
         * We're using a manually specified address if the address is set
         * to anything other than all ones. Setting the address to all ones
         * disables manual mode and goes back to automatic address determination
         * (tracking the true address that the radio has).
         */
        strip_info->manual_dev_addr =
            memcmp(addr->c, broadcast_address.c,
                   sizeof(broadcast_address));
        if (strip_info->manual_dev_addr)
                *(MetricomAddress *) strip_info->dev->dev_addr = *addr;
        else
                *(MetricomAddress *) strip_info->dev->dev_addr =
                    strip_info->true_dev_addr;
        return 0;
}

static int strip_set_mac_address(struct net_device *dev, void *addr)
{
        struct strip *strip_info = netdev_priv(dev);
        struct sockaddr *sa = addr;
        printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name);
        set_mac_address(strip_info, (MetricomAddress *) sa->sa_data);
        return 0;
}

static struct net_device_stats *strip_get_stats(struct net_device *dev)
{
        struct strip *strip_info = netdev_priv(dev);
        static struct net_device_stats stats;

        memset(&stats, 0, sizeof(struct net_device_stats));

        stats.rx_packets = strip_info->rx_packets;
        stats.tx_packets = strip_info->tx_packets;
        stats.rx_dropped = strip_info->rx_dropped;
        stats.tx_dropped = strip_info->tx_dropped;
        stats.tx_errors = strip_info->tx_errors;
        stats.rx_errors = strip_info->rx_errors;
        stats.rx_over_errors = strip_info->rx_over_errors;
        return (&stats);
}


/************************************************************************/
/* Opening and closing                                                  */

/*
 * Here's the order things happen:
 * When the user runs "slattach -p strip ..."
 *  1. The TTY module calls strip_open;;
 *  2. strip_open calls strip_alloc
 *  3.                  strip_alloc calls register_netdev
 *  4.                  register_netdev calls strip_dev_init
 *  5. then strip_open finishes setting up the strip_info
 *
 * When the user runs "ifconfig st<x> up address netmask ..."
 *  6. strip_open_low gets called
 *
 * When the user runs "ifconfig st<x> down"
 *  7. strip_close_low gets called
 *
 * When the user kills the slattach process
 *  8. strip_close gets called
 *  9. strip_close calls dev_close
 * 10. if the device is still up, then dev_close calls strip_close_low
 * 11. strip_close calls strip_free
 */

/* Open the low-level part of the STRIP channel. Easy! */

static int strip_open_low(struct net_device *dev)
{
        struct strip *strip_info = netdev_priv(dev);

        if (strip_info->tty == NULL)
                return (-ENODEV);

        if (!allocate_buffers(strip_info, dev->mtu))
                return (-ENOMEM);

        strip_info->sx_count = 0;
        strip_info->tx_left = 0;

        strip_info->discard = 0;
        strip_info->working = FALSE;
        strip_info->firmware_level = NoStructure;
        strip_info->next_command = CompatibilityCommand;
        strip_info->user_baud = tty_get_baud_rate(strip_info->tty);

        printk(KERN_INFO "%s: Initializing Radio.\n",
               strip_info->dev->name);
        ResetRadio(strip_info);
        strip_info->idle_timer.expires = jiffies + 1 * HZ;
        add_timer(&strip_info->idle_timer);
        netif_wake_queue(dev);
        return (0);
}


/*
 * Close the low-level part of the STRIP channel. Easy!
 */

static int strip_close_low(struct net_device *dev)
{
        struct strip *strip_info = netdev_priv(dev);

        if (strip_info->tty == NULL)
                return -EBUSY;
        clear_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags);
        netif_stop_queue(dev);

        /*
         * Free all STRIP frame buffers.
         */
        kfree(strip_info->rx_buff);
        strip_info->rx_buff = NULL;
        kfree(strip_info->sx_buff);
        strip_info->sx_buff = NULL;
        kfree(strip_info->tx_buff);
        strip_info->tx_buff = NULL;

        del_timer(&strip_info->idle_timer);
        return 0;
}

static const struct header_ops strip_header_ops = {
        .create = strip_header,
        .rebuild = strip_rebuild_header,
};


static const struct net_device_ops strip_netdev_ops = {
        .ndo_open       = strip_open_low,
        .ndo_stop       = strip_close_low,
        .ndo_start_xmit = strip_xmit,
        .ndo_set_mac_address = strip_set_mac_address,
        .ndo_get_stats  = strip_get_stats,
        .ndo_change_mtu = strip_change_mtu,
};

/*
 * This routine is called by DDI when the
 * (dynamically assigned) device is registered
 */

static void strip_dev_setup(struct net_device *dev)
{
        /*
         * Finish setting up the DEVICE info.
         */

        dev->trans_start = 0;
        dev->tx_queue_len = 30; /* Drop after 30 frames queued */

        dev->flags = 0;
        dev->mtu = DEFAULT_STRIP_MTU;
        dev->type = ARPHRD_METRICOM;    /* dtang */
        dev->hard_header_len = sizeof(STRIP_Header);
        /*
         *  netdev_priv(dev) Already holds a pointer to our struct strip
         */

        *(MetricomAddress *)dev->broadcast = broadcast_address;
        dev->dev_addr[0] = 0;
        dev->addr_len = sizeof(MetricomAddress);

        dev->header_ops = &strip_header_ops,
        dev->netdev_ops = &strip_netdev_ops;
}

/*
 * Free a STRIP channel.
 */

static void strip_free(struct strip *strip_info)
{
        unsigned long flags;

        spin_lock_irqsave(&strip_lock, flags);
        list_del_rcu(&strip_info->list);
        spin_unlock_irqrestore(&strip_lock, flags);

        strip_info->magic = 0;

        free_netdev(strip_info->dev);
}


/*
 * Allocate a new free STRIP channel
 */
static struct strip *strip_alloc(void)
{
        struct list_head *n;
        unsigned long flags;
        struct net_device *dev;
        struct strip *strip_info;

        dev = alloc_netdev(sizeof(struct strip), "st%d",
                           strip_dev_setup);

        if (!dev)
                return NULL;    /* If no more memory, return */


        strip_info = netdev_priv(dev);
        strip_info->dev = dev;

        strip_info->magic = STRIP_MAGIC;
        strip_info->tty = NULL;

        strip_info->gratuitous_arp = jiffies + LongTime;
        strip_info->arp_interval = 0;
        init_timer(&strip_info->idle_timer);
        strip_info->idle_timer.data = (long) dev;
        strip_info->idle_timer.function = strip_IdleTask;


        spin_lock_irqsave(&strip_lock, flags);
 rescan:
        /*
         * Search the list to find where to put our new entry
         * (and in the process decide what channel number it is
         * going to be)
         */
        list_for_each(n, &strip_list) {
                struct strip *s = hlist_entry(n, struct strip, list);

                if (s->dev->base_addr == dev->base_addr) {
                        ++dev->base_addr;
                        goto rescan;
                }
        }

        sprintf(dev->name, "st%ld", dev->base_addr);

        list_add_tail_rcu(&strip_info->list, &strip_list);
        spin_unlock_irqrestore(&strip_lock, flags);

        return strip_info;
}

/*
 * Open the high-level part of the STRIP channel.
 * This function is called by the TTY module when the
 * STRIP line discipline is called for.  Because we are
 * sure the tty line exists, we only have to link it to
 * a free STRIP channel...
 */

static int strip_open(struct tty_struct *tty)
{
        struct strip *strip_info = tty->disc_data;

        /*
         * First make sure we're not already connected.
         */

        if (strip_info && strip_info->magic == STRIP_MAGIC)
                return -EEXIST;

        /*
         * We need a write method.
         */

        if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
                return -EOPNOTSUPP;

        /*
         * OK.  Find a free STRIP channel to use.
         */
        if ((strip_info = strip_alloc()) == NULL)
                return -ENFILE;

        /*
         * Register our newly created device so it can be ifconfig'd
         * strip_dev_init() will be called as a side-effect
         */

        if (register_netdev(strip_info->dev) != 0) {
                printk(KERN_ERR "strip: register_netdev() failed.\n");
                strip_free(strip_info);
                return -ENFILE;
        }

        strip_info->tty = tty;
        tty->disc_data = strip_info;
        tty->receive_room = 65536;

        tty_driver_flush_buffer(tty);

        /*
         * Restore default settings
         */

        strip_info->dev->type = ARPHRD_METRICOM;        /* dtang */

        /*
         * Set tty options
         */

        tty->termios->c_iflag |= IGNBRK | IGNPAR;       /* Ignore breaks and parity errors. */
        tty->termios->c_cflag |= CLOCAL;        /* Ignore modem control signals. */
        tty->termios->c_cflag &= ~HUPCL;        /* Don't close on hup */

        printk(KERN_INFO "STRIP: device \"%s\" activated\n",
               strip_info->dev->name);

        /*
         * Done.  We have linked the TTY line to a channel.
         */
        return (strip_info->dev->base_addr);
}

/*
 * Close down a STRIP channel.
 * This means flushing out any pending queues, and then restoring the
 * TTY line discipline to what it was before it got hooked to STRIP
 * (which usually is TTY again).
 */

static void strip_close(struct tty_struct *tty)
{
        struct strip *strip_info = tty->disc_data;

        /*
         * First make sure we're connected.
         */

        if (!strip_info || strip_info->magic != STRIP_MAGIC)
                return;

        unregister_netdev(strip_info->dev);

        tty->disc_data = NULL;
        strip_info->tty = NULL;
        printk(KERN_INFO "STRIP: device \"%s\" closed down\n",
               strip_info->dev->name);
        strip_free(strip_info);
        tty->disc_data = NULL;
}


/************************************************************************/
/* Perform I/O control calls on an active STRIP channel.                */

static int strip_ioctl(struct tty_struct *tty, struct file *file,
                       unsigned int cmd, unsigned long arg)
{
        struct strip *strip_info = tty->disc_data;

        /*
         * First make sure we're connected.
         */

        if (!strip_info || strip_info->magic != STRIP_MAGIC)
                return -EINVAL;

        switch (cmd) {
        case SIOCGIFNAME:
                if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1))
                        return -EFAULT;
                break;
        case SIOCSIFHWADDR:
        {
                MetricomAddress addr;
                //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
                if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress)))
                        return -EFAULT;
                return set_mac_address(strip_info, &addr);
        }
        default:
                return tty_mode_ioctl(tty, file, cmd, arg);
                break;
        }
        return 0;
}


/************************************************************************/
/* Initialization                                                       */

static struct tty_ldisc_ops strip_ldisc = {
        .magic = TTY_LDISC_MAGIC,
        .name = "strip",
        .owner = THIS_MODULE,
        .open = strip_open,
        .close = strip_close,
        .ioctl = strip_ioctl,
        .receive_buf = strip_receive_buf,
        .write_wakeup = strip_write_some_more,
};

/*
 * Initialize the STRIP driver.
 * This routine is called at boot time, to bootstrap the multi-channel
 * STRIP driver
 */

static char signon[] __initdata =
    KERN_INFO "STRIP: Version %s (unlimited channels)\n";

static int __init strip_init_driver(void)
{
        int status;

        printk(signon, StripVersion);

        
        /*
         * Fill in our line protocol discipline, and register it
         */
        if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc)))
                printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n",
                       status);

        /*
         * Register the status file with /proc
         */
        proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops);

        return status;
}

module_init(strip_init_driver);

static const char signoff[] __exitdata =
    KERN_INFO "STRIP: Module Unloaded\n";

static void __exit strip_exit_driver(void)
{
        int i;
        struct list_head *p,*n;

        /* module ref count rules assure that all entries are unregistered */
        list_for_each_safe(p, n, &strip_list) {
                struct strip *s = list_entry(p, struct strip, list);
                strip_free(s);
        }

        /* Unregister with the /proc/net file here. */
        proc_net_remove(&init_net, "strip");

        if ((i = tty_unregister_ldisc(N_STRIP)))
                printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i);

        printk(signoff);
}

module_exit(strip_exit_driver);

MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>");
MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver");
MODULE_LICENSE("Dual BSD/GPL");

MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem");