2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic device routines.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
30 #include "rt2x00lib.h"
33 * Radio control handlers.
35 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
40 * Don't enable the radio twice.
41 * And check if the hardware button has been disabled.
43 if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
44 test_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags))
48 * Initialize all data queues.
50 rt2x00queue_init_queues(rt2x00dev);
56 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
60 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
62 rt2x00leds_led_radio(rt2x00dev, true);
63 rt2x00led_led_activity(rt2x00dev, true);
65 set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
70 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
73 * Start the TX queues.
75 ieee80211_wake_queues(rt2x00dev->hw);
80 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
82 if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
88 ieee80211_stop_queues(rt2x00dev->hw);
93 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
98 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
99 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
100 rt2x00led_led_activity(rt2x00dev, false);
101 rt2x00leds_led_radio(rt2x00dev, false);
104 void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
107 * When we are disabling the RX, we should also stop the link tuner.
109 if (state == STATE_RADIO_RX_OFF)
110 rt2x00link_stop_tuner(rt2x00dev);
112 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
115 * When we are enabling the RX, we should also start the link tuner.
117 if (state == STATE_RADIO_RX_ON)
118 rt2x00link_start_tuner(rt2x00dev);
121 static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
123 struct rt2x00_dev *rt2x00dev =
124 container_of(work, struct rt2x00_dev, filter_work);
126 rt2x00dev->ops->lib->config_filter(rt2x00dev, rt2x00dev->packet_filter);
129 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
130 struct ieee80211_vif *vif)
132 struct rt2x00_dev *rt2x00dev = data;
133 struct rt2x00_intf *intf = vif_to_intf(vif);
134 struct ieee80211_bss_conf conf;
138 * Copy all data we need during this action under the protection
139 * of a spinlock. Otherwise race conditions might occur which results
140 * into an invalid configuration.
142 spin_lock(&intf->lock);
144 memcpy(&conf, &vif->bss_conf, sizeof(conf));
145 delayed_flags = intf->delayed_flags;
146 intf->delayed_flags = 0;
148 spin_unlock(&intf->lock);
151 * It is possible the radio was disabled while the work had been
152 * scheduled. If that happens we should return here immediately,
153 * note that in the spinlock protected area above the delayed_flags
154 * have been cleared correctly.
156 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
159 if (delayed_flags & DELAYED_UPDATE_BEACON)
160 rt2x00queue_update_beacon(rt2x00dev, vif);
162 if (delayed_flags & DELAYED_CONFIG_ERP)
163 rt2x00lib_config_erp(rt2x00dev, intf, &conf);
165 if (delayed_flags & DELAYED_LED_ASSOC)
166 rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
169 static void rt2x00lib_intf_scheduled(struct work_struct *work)
171 struct rt2x00_dev *rt2x00dev =
172 container_of(work, struct rt2x00_dev, intf_work);
175 * Iterate over each interface and perform the
176 * requested configurations.
178 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
179 rt2x00lib_intf_scheduled_iter,
184 * Interrupt context handlers.
186 static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
187 struct ieee80211_vif *vif)
189 struct rt2x00_dev *rt2x00dev = data;
190 struct rt2x00_intf *intf = vif_to_intf(vif);
192 if (vif->type != NL80211_IFTYPE_AP &&
193 vif->type != NL80211_IFTYPE_ADHOC)
197 * Clean up the beacon skb.
199 rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb);
200 intf->beacon->skb = NULL;
202 spin_lock(&intf->lock);
203 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
204 spin_unlock(&intf->lock);
207 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
209 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
212 ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
213 rt2x00lib_beacondone_iter,
216 schedule_work(&rt2x00dev->intf_work);
218 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
220 void rt2x00lib_txdone(struct queue_entry *entry,
221 struct txdone_entry_desc *txdesc)
223 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
224 struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
225 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
226 enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
227 u8 rate_idx, rate_flags;
232 rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
235 * If the IV/EIV data was stripped from the frame before it was
236 * passed to the hardware, we should now reinsert it again because
237 * mac80211 will expect the the same data to be present it the
238 * frame as it was passed to us.
240 if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
241 rt2x00crypto_tx_insert_iv(entry->skb);
244 * Send frame to debugfs immediately, after this call is completed
245 * we are going to overwrite the skb->cb array.
247 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
250 * Update TX statistics.
252 rt2x00dev->link.qual.tx_success +=
253 test_bit(TXDONE_SUCCESS, &txdesc->flags);
254 rt2x00dev->link.qual.tx_failed +=
255 test_bit(TXDONE_FAILURE, &txdesc->flags);
257 rate_idx = skbdesc->tx_rate_idx;
258 rate_flags = skbdesc->tx_rate_flags;
261 * Initialize TX status
263 memset(&tx_info->status, 0, sizeof(tx_info->status));
264 tx_info->status.ack_signal = 0;
265 tx_info->status.rates[0].idx = rate_idx;
266 tx_info->status.rates[0].flags = rate_flags;
267 tx_info->status.rates[0].count = txdesc->retry + 1;
268 tx_info->status.rates[1].idx = -1; /* terminate */
270 if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
271 if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
272 tx_info->flags |= IEEE80211_TX_STAT_ACK;
273 else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
274 rt2x00dev->low_level_stats.dot11ACKFailureCount++;
277 if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
278 if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
279 rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
280 else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
281 rt2x00dev->low_level_stats.dot11RTSFailureCount++;
285 * Only send the status report to mac80211 when TX status was
286 * requested by it. If this was a extra frame coming through
287 * a mac80211 library call (RTS/CTS) then we should not send the
288 * status report back.
290 if (tx_info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
291 ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
293 dev_kfree_skb_irq(entry->skb);
296 * Make this entry available for reuse.
301 rt2x00dev->ops->lib->clear_entry(entry);
303 clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
304 rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
307 * If the data queue was below the threshold before the txdone
308 * handler we must make sure the packet queue in the mac80211 stack
309 * is reenabled when the txdone handler has finished.
311 if (!rt2x00queue_threshold(entry->queue))
312 ieee80211_wake_queue(rt2x00dev->hw, qid);
314 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
316 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
317 struct queue_entry *entry)
319 struct rxdone_entry_desc rxdesc;
321 struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
322 struct ieee80211_supported_band *sband;
323 const struct rt2x00_rate *rate;
324 unsigned int header_length;
330 * Allocate a new sk_buffer. If no new buffer available, drop the
331 * received frame and reuse the existing buffer.
333 skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry);
340 rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
343 * Extract the RXD details.
345 memset(&rxdesc, 0, sizeof(rxdesc));
346 rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
349 * The data behind the ieee80211 header must be
350 * aligned on a 4 byte boundary.
352 header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
353 align = ((unsigned long)(entry->skb->data + header_length)) & 3;
356 * Hardware might have stripped the IV/EIV/ICV data,
357 * in that case it is possible that the data was
358 * provided seperately (through hardware descriptor)
359 * in which case we should reinsert the data into the frame.
361 if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
362 (rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
363 rt2x00crypto_rx_insert_iv(entry->skb, align,
364 header_length, &rxdesc);
366 skb_push(entry->skb, align);
367 /* Move entire frame in 1 command */
368 memmove(entry->skb->data, entry->skb->data + align,
372 /* Update data pointers, trim buffer to correct size */
373 skb_trim(entry->skb, rxdesc.size);
376 * Update RX statistics.
378 sband = &rt2x00dev->bands[rt2x00dev->curr_band];
379 for (i = 0; i < sband->n_bitrates; i++) {
380 rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
382 if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
383 (rate->plcp == rxdesc.signal)) ||
384 ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
385 (rate->bitrate == rxdesc.signal))) {
392 WARNING(rt2x00dev, "Frame received with unrecognized signal,"
393 "signal=0x%.2x, plcp=%d.\n", rxdesc.signal,
394 !!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP));
399 * Update extra components
401 rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
402 rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
404 rx_status->mactime = rxdesc.timestamp;
405 rx_status->rate_idx = idx;
406 rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi);
407 rx_status->signal = rxdesc.rssi;
408 rx_status->flag = rxdesc.flags;
409 rx_status->antenna = rt2x00dev->link.ant.active.rx;
412 * Send frame to mac80211 & debugfs.
413 * mac80211 will clean up the skb structure.
415 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
416 ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
419 * Replace the skb with the freshly allocated one.
424 rt2x00dev->ops->lib->clear_entry(entry);
426 rt2x00queue_index_inc(entry->queue, Q_INDEX);
428 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
431 * Driver initialization handlers.
433 const struct rt2x00_rate rt2x00_supported_rates[12] = {
435 .flags = DEV_RATE_CCK,
441 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
447 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
453 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
459 .flags = DEV_RATE_OFDM,
465 .flags = DEV_RATE_OFDM,
471 .flags = DEV_RATE_OFDM,
477 .flags = DEV_RATE_OFDM,
483 .flags = DEV_RATE_OFDM,
489 .flags = DEV_RATE_OFDM,
495 .flags = DEV_RATE_OFDM,
501 .flags = DEV_RATE_OFDM,
508 static void rt2x00lib_channel(struct ieee80211_channel *entry,
509 const int channel, const int tx_power,
512 entry->center_freq = ieee80211_channel_to_frequency(channel);
513 entry->hw_value = value;
514 entry->max_power = tx_power;
515 entry->max_antenna_gain = 0xff;
518 static void rt2x00lib_rate(struct ieee80211_rate *entry,
519 const u16 index, const struct rt2x00_rate *rate)
522 entry->bitrate = rate->bitrate;
523 entry->hw_value =index;
524 entry->hw_value_short = index;
526 if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
527 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
530 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
531 struct hw_mode_spec *spec)
533 struct ieee80211_hw *hw = rt2x00dev->hw;
534 struct ieee80211_channel *channels;
535 struct ieee80211_rate *rates;
536 unsigned int num_rates;
540 if (spec->supported_rates & SUPPORT_RATE_CCK)
542 if (spec->supported_rates & SUPPORT_RATE_OFDM)
545 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
549 rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
551 goto exit_free_channels;
554 * Initialize Rate list.
556 for (i = 0; i < num_rates; i++)
557 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
560 * Initialize Channel list.
562 for (i = 0; i < spec->num_channels; i++) {
563 rt2x00lib_channel(&channels[i],
564 spec->channels[i].channel,
565 spec->channels_info[i].tx_power1, i);
569 * Intitialize 802.11b, 802.11g
573 if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
574 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
575 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
576 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
577 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
578 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
579 &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
583 * Intitialize 802.11a
585 * Channels: OFDM, UNII, HiperLAN2.
587 if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
588 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
589 spec->num_channels - 14;
590 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
592 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
593 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
594 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
595 &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
602 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
606 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
608 if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
609 ieee80211_unregister_hw(rt2x00dev->hw);
611 if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
612 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
613 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
614 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
615 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
618 kfree(rt2x00dev->spec.channels_info);
621 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
623 struct hw_mode_spec *spec = &rt2x00dev->spec;
626 if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
630 * Initialize HW modes.
632 status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
637 * Initialize HW fields.
639 rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
644 status = ieee80211_register_hw(rt2x00dev->hw);
646 rt2x00lib_remove_hw(rt2x00dev);
650 set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
656 * Initialization/uninitialization handlers.
658 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
660 if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
664 * Unregister extra components.
666 rt2x00rfkill_unregister(rt2x00dev);
669 * Allow the HW to uninitialize.
671 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
674 * Free allocated queue entries.
676 rt2x00queue_uninitialize(rt2x00dev);
679 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
683 if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
687 * Allocate all queue entries.
689 status = rt2x00queue_initialize(rt2x00dev);
694 * Initialize the device.
696 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
698 rt2x00queue_uninitialize(rt2x00dev);
702 set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
705 * Register the extra components.
707 rt2x00rfkill_register(rt2x00dev);
712 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
716 if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
720 * If this is the first interface which is added,
721 * we should load the firmware now.
723 retval = rt2x00lib_load_firmware(rt2x00dev);
728 * Initialize the device.
730 retval = rt2x00lib_initialize(rt2x00dev);
734 rt2x00dev->intf_ap_count = 0;
735 rt2x00dev->intf_sta_count = 0;
736 rt2x00dev->intf_associated = 0;
738 set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
743 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
745 if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
749 * Perhaps we can add something smarter here,
750 * but for now just disabling the radio should do.
752 rt2x00lib_disable_radio(rt2x00dev);
754 rt2x00dev->intf_ap_count = 0;
755 rt2x00dev->intf_sta_count = 0;
756 rt2x00dev->intf_associated = 0;
760 * driver allocation handlers.
762 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
764 int retval = -ENOMEM;
766 mutex_init(&rt2x00dev->csr_mutex);
769 * Make room for rt2x00_intf inside the per-interface
770 * structure ieee80211_vif.
772 rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
775 * Determine which operating modes are supported, all modes
776 * which require beaconing, depend on the availability of
779 rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
780 if (rt2x00dev->ops->bcn->entry_num > 0)
781 rt2x00dev->hw->wiphy->interface_modes |=
782 BIT(NL80211_IFTYPE_ADHOC) |
783 BIT(NL80211_IFTYPE_AP);
786 * Let the driver probe the device to detect the capabilities.
788 retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
790 ERROR(rt2x00dev, "Failed to allocate device.\n");
795 * Initialize configuration work.
797 INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
798 INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
801 * Allocate queue array.
803 retval = rt2x00queue_allocate(rt2x00dev);
808 * Initialize ieee80211 structure.
810 retval = rt2x00lib_probe_hw(rt2x00dev);
812 ERROR(rt2x00dev, "Failed to initialize hw.\n");
817 * Register extra components.
819 rt2x00link_register(rt2x00dev);
820 rt2x00leds_register(rt2x00dev);
821 rt2x00rfkill_allocate(rt2x00dev);
822 rt2x00debug_register(rt2x00dev);
824 set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
829 rt2x00lib_remove_dev(rt2x00dev);
833 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
835 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
837 clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
842 rt2x00lib_disable_radio(rt2x00dev);
845 * Uninitialize device.
847 rt2x00lib_uninitialize(rt2x00dev);
850 * Free extra components
852 rt2x00debug_deregister(rt2x00dev);
853 rt2x00rfkill_free(rt2x00dev);
854 rt2x00leds_unregister(rt2x00dev);
857 * Free ieee80211_hw memory.
859 rt2x00lib_remove_hw(rt2x00dev);
862 * Free firmware image.
864 rt2x00lib_free_firmware(rt2x00dev);
867 * Free queue structures.
869 rt2x00queue_free(rt2x00dev);
871 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
874 * Device state handlers
877 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
881 NOTICE(rt2x00dev, "Going to sleep.\n");
884 * Only continue if mac80211 has open interfaces.
886 if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
887 !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
890 set_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags);
895 rt2x00lib_stop(rt2x00dev);
896 rt2x00lib_uninitialize(rt2x00dev);
899 * Suspend/disable extra components.
901 rt2x00leds_suspend(rt2x00dev);
902 rt2x00debug_deregister(rt2x00dev);
906 * Set device mode to sleep for power management,
907 * on some hardware this call seems to consistently fail.
908 * From the specifications it is hard to tell why it fails,
909 * and if this is a "bad thing".
910 * Overall it is safe to just ignore the failure and
911 * continue suspending. The only downside is that the
912 * device will not be in optimal power save mode, but with
913 * the radio and the other components already disabled the
914 * device is as good as disabled.
916 retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
918 WARNING(rt2x00dev, "Device failed to enter sleep state, "
919 "continue suspending.\n");
923 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
925 static void rt2x00lib_resume_intf(void *data, u8 *mac,
926 struct ieee80211_vif *vif)
928 struct rt2x00_dev *rt2x00dev = data;
929 struct rt2x00_intf *intf = vif_to_intf(vif);
931 spin_lock(&intf->lock);
933 rt2x00lib_config_intf(rt2x00dev, intf,
934 vif->type, intf->mac, intf->bssid);
938 * Master or Ad-hoc mode require a new beacon update.
940 if (vif->type == NL80211_IFTYPE_AP ||
941 vif->type == NL80211_IFTYPE_ADHOC)
942 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
944 spin_unlock(&intf->lock);
947 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
951 NOTICE(rt2x00dev, "Waking up.\n");
954 * Restore/enable extra components.
956 rt2x00debug_register(rt2x00dev);
957 rt2x00leds_resume(rt2x00dev);
960 * Only continue if mac80211 had open interfaces.
962 if (!test_and_clear_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags))
966 * Reinitialize device and all active interfaces.
968 retval = rt2x00lib_start(rt2x00dev);
973 * Reconfigure device.
975 retval = rt2x00mac_config(rt2x00dev->hw, ~0);
980 * Iterator over each active interface to
981 * reconfigure the hardware.
983 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
984 rt2x00lib_resume_intf, rt2x00dev);
987 * We are ready again to receive requests from mac80211.
989 set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
992 * It is possible that during that mac80211 has attempted
993 * to send frames while we were suspending or resuming.
994 * In that case we have disabled the TX queue and should
995 * now enable it again
997 ieee80211_wake_queues(rt2x00dev->hw);
1000 * During interface iteration we might have changed the
1001 * delayed_flags, time to handles the event by calling
1002 * the work handler directly.
1004 rt2x00lib_intf_scheduled(&rt2x00dev->intf_work);
1009 rt2x00lib_stop(rt2x00dev);
1010 rt2x00lib_uninitialize(rt2x00dev);
1011 rt2x00debug_deregister(rt2x00dev);
1015 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1016 #endif /* CONFIG_PM */
1019 * rt2x00lib module information.
1021 MODULE_AUTHOR(DRV_PROJECT);
1022 MODULE_VERSION(DRV_VERSION);
1023 MODULE_DESCRIPTION("rt2x00 library");
1024 MODULE_LICENSE("GPL");