SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500usb.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500usb
  23         Abstract: rt2500usb device specific routines.
  24         Supported chipsets: RT2570.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/usb.h>
  33
  34 #include "rt2x00.h"
  35 #include "rt2x00usb.h"
  36 #include "rt2500usb.h"
  37
  38 /*
  39  * Allow hardware encryption to be disabled.
  40  */
  41 static int modparam_nohwcrypt = 0;
  42 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  43 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  44
  45 /*
  46  * Register access.
  47  * All access to the CSR registers will go through the methods
  48  * rt2500usb_register_read and rt2500usb_register_write.
  49  * BBP and RF register require indirect register access,
  50  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  51  * These indirect registers work with busy bits,
  52  * and we will try maximal REGISTER_BUSY_COUNT times to access
  53  * the register while taking a REGISTER_BUSY_DELAY us delay
  54  * between each attampt. When the busy bit is still set at that time,
  55  * the access attempt is considered to have failed,
  56  * and we will print an error.
  57  * If the csr_mutex is already held then the _lock variants must
  58  * be used instead.
  59  */
  60 static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
  61                                            const unsigned int offset,
  62                                            u16 *value)
  63 {
  64         __le16 reg;
  65         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  66                                       USB_VENDOR_REQUEST_IN, offset,
  67                                       &reg, sizeof(reg), REGISTER_TIMEOUT);
  68         *value = le16_to_cpu(reg);
  69 }
  70
  71 static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
  72                                                 const unsigned int offset,
  73                                                 u16 *value)
  74 {
  75         __le16 reg;
  76         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
  77                                        USB_VENDOR_REQUEST_IN, offset,
  78                                        &reg, sizeof(reg), REGISTER_TIMEOUT);
  79         *value = le16_to_cpu(reg);
  80 }
  81
  82 static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
  83                                                 const unsigned int offset,
  84                                                 void *value, const u16 length)
  85 {
  86         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  87                                       USB_VENDOR_REQUEST_IN, offset,
  88                                       value, length,
  89                                       REGISTER_TIMEOUT16(length));
  90 }
  91
  92 static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
  93                                             const unsigned int offset,
  94                                             u16 value)
  95 {
  96         __le16 reg = cpu_to_le16(value);
  97         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  98                                       USB_VENDOR_REQUEST_OUT, offset,
  99                                       &reg, sizeof(reg), REGISTER_TIMEOUT);
 100 }
 101
 102 static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
 103                                                  const unsigned int offset,
 104                                                  u16 value)
 105 {
 106         __le16 reg = cpu_to_le16(value);
 107         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 108                                        USB_VENDOR_REQUEST_OUT, offset,
 109                                        &reg, sizeof(reg), REGISTER_TIMEOUT);
 110 }
 111
 112 static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 113                                                  const unsigned int offset,
 114                                                  void *value, const u16 length)
 115 {
 116         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 117                                       USB_VENDOR_REQUEST_OUT, offset,
 118                                       value, length,
 119                                       REGISTER_TIMEOUT16(length));
 120 }
 121
 122 static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 123                                   const unsigned int offset,
 124                                   struct rt2x00_field16 field,
 125                                   u16 *reg)
 126 {
 127         unsigned int i;
 128
 129         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 130                 rt2500usb_register_read_lock(rt2x00dev, offset, reg);
 131                 if (!rt2x00_get_field16(*reg, field))
 132                         return 1;
 133                 udelay(REGISTER_BUSY_DELAY);
 134         }
 135
 136         ERROR(rt2x00dev, "Indirect register access failed: "
 137               "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
 138         *reg = ~0;
 139
 140         return 0;
 141 }
 142
 143 #define WAIT_FOR_BBP(__dev, __reg) \
 144         rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg))
 145 #define WAIT_FOR_RF(__dev, __reg) \
 146         rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg))
 147
 148 static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 149                                 const unsigned int word, const u8 value)
 150 {
 151         u16 reg;
 152
 153         mutex_lock(&rt2x00dev->csr_mutex);
 154
 155         /*
 156          * Wait until the BBP becomes available, afterwards we
 157          * can safely write the new data into the register.
 158          */
 159         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 160                 reg = 0;
 161                 rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
 162                 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 163                 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
 164
 165                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 166         }
 167
 168         mutex_unlock(&rt2x00dev->csr_mutex);
 169 }
 170
 171 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 172                                const unsigned int word, u8 *value)
 173 {
 174         u16 reg;
 175
 176         mutex_lock(&rt2x00dev->csr_mutex);
 177
 178         /*
 179          * Wait until the BBP becomes available, afterwards we
 180          * can safely write the read request into the register.
 181          * After the data has been written, we wait until hardware
 182          * returns the correct value, if at any time the register
 183          * doesn't become available in time, reg will be 0xffffffff
 184          * which means we return 0xff to the caller.
 185          */
 186         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 187                 reg = 0;
 188                 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 189                 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
 190
 191                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 192
 193                 if (WAIT_FOR_BBP(rt2x00dev, &reg))
 194                         rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
 195         }
 196
 197         *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 198
 199         mutex_unlock(&rt2x00dev->csr_mutex);
 200 }
 201
 202 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
 203                                const unsigned int word, const u32 value)
 204 {
 205         u16 reg;
 206
 207         if (!word)
 208                 return;
 209
 210         mutex_lock(&rt2x00dev->csr_mutex);
 211
 212         /*
 213          * Wait until the RF becomes available, afterwards we
 214          * can safely write the new data into the register.
 215          */
 216         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 217                 reg = 0;
 218                 rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
 219                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
 220
 221                 reg = 0;
 222                 rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
 223                 rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
 224                 rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
 225                 rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
 226
 227                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
 228                 rt2x00_rf_write(rt2x00dev, word, value);
 229         }
 230
 231         mutex_unlock(&rt2x00dev->csr_mutex);
 232 }
 233
 234 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 235 static void _rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
 236                                      const unsigned int offset,
 237                                      u32 *value)
 238 {
 239         rt2500usb_register_read(rt2x00dev, offset, (u16 *)value);
 240 }
 241
 242 static void _rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
 243                                       const unsigned int offset,
 244                                       u32 value)
 245 {
 246         rt2500usb_register_write(rt2x00dev, offset, value);
 247 }
 248
 249 static const struct rt2x00debug rt2500usb_rt2x00debug = {
 250         .owner  = THIS_MODULE,
 251         .csr    = {
 252                 .read           = _rt2500usb_register_read,
 253                 .write          = _rt2500usb_register_write,
 254                 .flags          = RT2X00DEBUGFS_OFFSET,
 255                 .word_base      = CSR_REG_BASE,
 256                 .word_size      = sizeof(u16),
 257                 .word_count     = CSR_REG_SIZE / sizeof(u16),
 258         },
 259         .eeprom = {
 260                 .read           = rt2x00_eeprom_read,
 261                 .write          = rt2x00_eeprom_write,
 262                 .word_base      = EEPROM_BASE,
 263                 .word_size      = sizeof(u16),
 264                 .word_count     = EEPROM_SIZE / sizeof(u16),
 265         },
 266         .bbp    = {
 267                 .read           = rt2500usb_bbp_read,
 268                 .write          = rt2500usb_bbp_write,
 269                 .word_base      = BBP_BASE,
 270                 .word_size      = sizeof(u8),
 271                 .word_count     = BBP_SIZE / sizeof(u8),
 272         },
 273         .rf     = {
 274                 .read           = rt2x00_rf_read,
 275                 .write          = rt2500usb_rf_write,
 276                 .word_base      = RF_BASE,
 277                 .word_size      = sizeof(u32),
 278                 .word_count     = RF_SIZE / sizeof(u32),
 279         },
 280 };
 281 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 282
 283 #ifdef CONFIG_RT2X00_LIB_LEDS
 284 static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
 285                                      enum led_brightness brightness)
 286 {
 287         struct rt2x00_led *led =
 288             container_of(led_cdev, struct rt2x00_led, led_dev);
 289         unsigned int enabled = brightness != LED_OFF;
 290         u16 reg;
 291
 292         rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, &reg);
 293
 294         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 295                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, enabled);
 296         else if (led->type == LED_TYPE_ACTIVITY)
 297                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, enabled);
 298
 299         rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg);
 300 }
 301
 302 static int rt2500usb_blink_set(struct led_classdev *led_cdev,
 303                                unsigned long *delay_on,
 304                                unsigned long *delay_off)
 305 {
 306         struct rt2x00_led *led =
 307             container_of(led_cdev, struct rt2x00_led, led_dev);
 308         u16 reg;
 309
 310         rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, &reg);
 311         rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, *delay_on);
 312         rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, *delay_off);
 313         rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg);
 314
 315         return 0;
 316 }
 317
 318 static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
 319                                struct rt2x00_led *led,
 320                                enum led_type type)
 321 {
 322         led->rt2x00dev = rt2x00dev;
 323         led->type = type;
 324         led->led_dev.brightness_set = rt2500usb_brightness_set;
 325         led->led_dev.blink_set = rt2500usb_blink_set;
 326         led->flags = LED_INITIALIZED;
 327 }
 328 #endif /* CONFIG_RT2X00_LIB_LEDS */
 329
 330 /*
 331  * Configuration handlers.
 332  */
 333
 334 /*
 335  * rt2500usb does not differentiate between shared and pairwise
 336  * keys, so we should use the same function for both key types.
 337  */
 338 static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 339                                 struct rt2x00lib_crypto *crypto,
 340                                 struct ieee80211_key_conf *key)
 341 {
 342         int timeout;
 343         u32 mask;
 344         u16 reg;
 345
 346         if (crypto->cmd == SET_KEY) {
 347                 /*
 348                  * Pairwise key will always be entry 0, but this
 349                  * could collide with a shared key on the same
 350                  * position...
 351                  */
 352                 mask = TXRX_CSR0_KEY_ID.bit_mask;
 353
 354                 rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 355                 reg &= mask;
 356
 357                 if (reg && reg == mask)
 358                         return -ENOSPC;
 359
 360                 reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
 361
 362                 key->hw_key_idx += reg ? ffz(reg) : 0;
 363
 364                 /*
 365                  * The encryption key doesn't fit within the CSR cache,
 366                  * this means we should allocate it seperately and use
 367                  * rt2x00usb_vendor_request() to send the key to the hardware.
 368                  */
 369                 reg = KEY_ENTRY(key->hw_key_idx);
 370                 timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
 371                 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
 372                                                     USB_VENDOR_REQUEST_OUT, reg,
 373                                                     crypto->key,
 374                                                     sizeof(crypto->key),
 375                                                     timeout);
 376
 377                 /*
 378                  * The driver does not support the IV/EIV generation
 379                  * in hardware. However it demands the data to be provided
 380                  * both seperately as well as inside the frame.
 381                  * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 382                  * to ensure rt2x00lib will not strip the data from the
 383                  * frame after the copy, now we must tell mac80211
 384                  * to generate the IV/EIV data.
 385                  */
 386                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 387                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
 388         }
 389
 390         /*
 391          * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate
 392          * a particular key is valid.
 393          */
 394         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 395         rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, crypto->cipher);
 396         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 397
 398         mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
 399         if (crypto->cmd == SET_KEY)
 400                 mask |= 1 << key->hw_key_idx;
 401         else if (crypto->cmd == DISABLE_KEY)
 402                 mask &= ~(1 << key->hw_key_idx);
 403         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, mask);
 404         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 405
 406         return 0;
 407 }
 408
 409 static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
 410                                     const unsigned int filter_flags)
 411 {
 412         u16 reg;
 413
 414         /*
 415          * Start configuration steps.
 416          * Note that the version error will always be dropped
 417          * and broadcast frames will always be accepted since
 418          * there is no filter for it at this time.
 419          */
 420         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 421         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC,
 422                            !(filter_flags & FIF_FCSFAIL));
 423         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL,
 424                            !(filter_flags & FIF_PLCPFAIL));
 425         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
 426                            !(filter_flags & FIF_CONTROL));
 427         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME,
 428                            !(filter_flags & FIF_PROMISC_IN_BSS));
 429         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
 430                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 431                            !rt2x00dev->intf_ap_count);
 432         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
 433         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
 434                            !(filter_flags & FIF_ALLMULTI));
 435         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, 0);
 436         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 437 }
 438
 439 static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
 440                                   struct rt2x00_intf *intf,
 441                                   struct rt2x00intf_conf *conf,
 442                                   const unsigned int flags)
 443 {
 444         unsigned int bcn_preload;
 445         u16 reg;
 446
 447         if (flags & CONFIG_UPDATE_TYPE) {
 448                 /*
 449                  * Enable beacon config
 450                  */
 451                 bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
 452                 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
 453                 rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
 454                 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
 455                                    2 * (conf->type != NL80211_IFTYPE_STATION));
 456                 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
 457
 458                 /*
 459                  * Enable synchronisation.
 460                  */
 461                 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 462                 rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
 463                 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 464
 465                 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 466                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
 467                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, conf->sync);
 468                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
 469                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 470         }
 471
 472         if (flags & CONFIG_UPDATE_MAC)
 473                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac,
 474                                               (3 * sizeof(__le16)));
 475
 476         if (flags & CONFIG_UPDATE_BSSID)
 477                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid,
 478                                               (3 * sizeof(__le16)));
 479 }
 480
 481 static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 482                                  struct rt2x00lib_erp *erp)
 483 {
 484         u16 reg;
 485
 486         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 487         rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout);
 488         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 489
 490         rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
 491         rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
 492                            !!erp->short_preamble);
 493         rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
 494
 495         rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates);
 496
 497         rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time);
 498         rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs);
 499         rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs);
 500 }
 501
 502 static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
 503                                  struct antenna_setup *ant)
 504 {
 505         u8 r2;
 506         u8 r14;
 507         u16 csr5;
 508         u16 csr6;
 509
 510         /*
 511          * We should never come here because rt2x00lib is supposed
 512          * to catch this and send us the correct antenna explicitely.
 513          */
 514         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 515                ant->tx == ANTENNA_SW_DIVERSITY);
 516
 517         rt2500usb_bbp_read(rt2x00dev, 2, &r2);
 518         rt2500usb_bbp_read(rt2x00dev, 14, &r14);
 519         rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
 520         rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
 521
 522         /*
 523          * Configure the TX antenna.
 524          */
 525         switch (ant->tx) {
 526         case ANTENNA_HW_DIVERSITY:
 527                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
 528                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
 529                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
 530                 break;
 531         case ANTENNA_A:
 532                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 533                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
 534                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
 535                 break;
 536         case ANTENNA_B:
 537         default:
 538                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 539                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
 540                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
 541                 break;
 542         }
 543
 544         /*
 545          * Configure the RX antenna.
 546          */
 547         switch (ant->rx) {
 548         case ANTENNA_HW_DIVERSITY:
 549                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
 550                 break;
 551         case ANTENNA_A:
 552                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 553                 break;
 554         case ANTENNA_B:
 555         default:
 556                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 557                 break;
 558         }
 559
 560         /*
 561          * RT2525E and RT5222 need to flip TX I/Q
 562          */
 563         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 564             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 565                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 566                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
 567                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
 568
 569                 /*
 570                  * RT2525E does not need RX I/Q Flip.
 571                  */
 572                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 573                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 574         } else {
 575                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
 576                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
 577         }
 578
 579         rt2500usb_bbp_write(rt2x00dev, 2, r2);
 580         rt2500usb_bbp_write(rt2x00dev, 14, r14);
 581         rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
 582         rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
 583 }
 584
 585 static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
 586                                      struct rf_channel *rf, const int txpower)
 587 {
 588         /*
 589          * Set TXpower.
 590          */
 591         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 592
 593         /*
 594          * For RT2525E we should first set the channel to half band higher.
 595          */
 596         if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
 597                 static const u32 vals[] = {
 598                         0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
 599                         0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
 600                         0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
 601                         0x00000902, 0x00000906
 602                 };
 603
 604                 rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 605                 if (rf->rf4)
 606                         rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 607         }
 608
 609         rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
 610         rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
 611         rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
 612         if (rf->rf4)
 613                 rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 614 }
 615
 616 static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 617                                      const int txpower)
 618 {
 619         u32 rf3;
 620
 621         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 622         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 623         rt2500usb_rf_write(rt2x00dev, 3, rf3);
 624 }
 625
 626 static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
 627                                       struct rt2x00lib_conf *libconf)
 628 {
 629         u16 reg;
 630
 631         rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 632         rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
 633                            libconf->conf->beacon_int * 4);
 634         rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 635 }
 636
 637 static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 638                              struct rt2x00lib_conf *libconf,
 639                              const unsigned int flags)
 640 {
 641         if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
 642                 rt2500usb_config_channel(rt2x00dev, &libconf->rf,
 643                                          libconf->conf->power_level);
 644         if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
 645             !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 646                 rt2500usb_config_txpower(rt2x00dev,
 647                                          libconf->conf->power_level);
 648         if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
 649                 rt2500usb_config_duration(rt2x00dev, libconf);
 650 }
 651
 652 /*
 653  * Link tuning
 654  */
 655 static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev,
 656                                  struct link_qual *qual)
 657 {
 658         u16 reg;
 659
 660         /*
 661          * Update FCS error count from register.
 662          */
 663         rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
 664         qual->rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
 665
 666         /*
 667          * Update False CCA count from register.
 668          */
 669         rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
 670         qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
 671 }
 672
 673 static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 674 {
 675         u16 eeprom;
 676         u16 value;
 677
 678         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
 679         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
 680         rt2500usb_bbp_write(rt2x00dev, 24, value);
 681
 682         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
 683         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
 684         rt2500usb_bbp_write(rt2x00dev, 25, value);
 685
 686         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
 687         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
 688         rt2500usb_bbp_write(rt2x00dev, 61, value);
 689
 690         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
 691         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
 692         rt2500usb_bbp_write(rt2x00dev, 17, value);
 693
 694         rt2x00dev->link.vgc_level = value;
 695 }
 696
 697 /*
 698  * NOTE: This function is directly ported from legacy driver, but
 699  * despite it being declared it was never called. Although link tuning
 700  * sounds like a good idea, and usually works well for the other drivers,
 701  * it does _not_ work with rt2500usb. Enabling this function will result
 702  * in TX capabilities only until association kicks in. Immediately
 703  * after the successful association all TX frames will be kept in the
 704  * hardware queue and never transmitted.
 705  */
 706 #if 0
 707 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 708 {
 709         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 710         u16 bbp_thresh;
 711         u16 vgc_bound;
 712         u16 sens;
 713         u16 r24;
 714         u16 r25;
 715         u16 r61;
 716         u16 r17_sens;
 717         u8 r17;
 718         u8 up_bound;
 719         u8 low_bound;
 720
 721         /*
 722          * Read current r17 value, as well as the sensitivity values
 723          * for the r17 register.
 724          */
 725         rt2500usb_bbp_read(rt2x00dev, 17, &r17);
 726         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
 727
 728         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
 729         up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
 730         low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER);
 731
 732         /*
 733          * If we are not associated, we should go straight to the
 734          * dynamic CCA tuning.
 735          */
 736         if (!rt2x00dev->intf_associated)
 737                 goto dynamic_cca_tune;
 738
 739         /*
 740          * Determine the BBP tuning threshold and correctly
 741          * set BBP 24, 25 and 61.
 742          */
 743         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
 744         bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
 745
 746         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
 747         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
 748         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
 749
 750         if ((rssi + bbp_thresh) > 0) {
 751                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
 752                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
 753                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
 754         } else {
 755                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
 756                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
 757                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
 758         }
 759
 760         rt2500usb_bbp_write(rt2x00dev, 24, r24);
 761         rt2500usb_bbp_write(rt2x00dev, 25, r25);
 762         rt2500usb_bbp_write(rt2x00dev, 61, r61);
 763
 764         /*
 765          * A too low RSSI will cause too much false CCA which will
 766          * then corrupt the R17 tuning. To remidy this the tuning should
 767          * be stopped (While making sure the R17 value will not exceed limits)
 768          */
 769         if (rssi >= -40) {
 770                 if (r17 != 0x60)
 771                         rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
 772                 return;
 773         }
 774
 775         /*
 776          * Special big-R17 for short distance
 777          */
 778         if (rssi >= -58) {
 779                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
 780                 if (r17 != sens)
 781                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 782                 return;
 783         }
 784
 785         /*
 786          * Special mid-R17 for middle distance
 787          */
 788         if (rssi >= -74) {
 789                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
 790                 if (r17 != sens)
 791                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 792                 return;
 793         }
 794
 795         /*
 796          * Leave short or middle distance condition, restore r17
 797          * to the dynamic tuning range.
 798          */
 799         low_bound = 0x32;
 800         if (rssi < -77)
 801                 up_bound -= (-77 - rssi);
 802
 803         if (up_bound < low_bound)
 804                 up_bound = low_bound;
 805
 806         if (r17 > up_bound) {
 807                 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
 808                 rt2x00dev->link.vgc_level = up_bound;
 809                 return;
 810         }
 811
 812 dynamic_cca_tune:
 813
 814         /*
 815          * R17 is inside the dynamic tuning range,
 816          * start tuning the link based on the false cca counter.
 817          */
 818         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
 819                 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
 820                 rt2x00dev->link.vgc_level = r17;
 821         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
 822                 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
 823                 rt2x00dev->link.vgc_level = r17;
 824         }
 825 }
 826 #else
 827 #define rt2500usb_link_tuner    NULL
 828 #endif
 829
 830 /*
 831  * Initialization functions.
 832  */
 833 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 834 {
 835         u16 reg;
 836
 837         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
 838                                     USB_MODE_TEST, REGISTER_TIMEOUT);
 839         rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
 840                                     0x00f0, REGISTER_TIMEOUT);
 841
 842         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 843         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
 844         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 845
 846         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
 847         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
 848
 849         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 850         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
 851         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
 852         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 853         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 854
 855         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 856         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 857         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 858         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 859         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 860
 861         rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
 862         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
 863         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
 864         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
 865         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
 866         rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
 867
 868         rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
 869         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
 870         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
 871         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
 872         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
 873         rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
 874
 875         rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
 876         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
 877         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
 878         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
 879         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
 880         rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
 881
 882         rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
 883         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
 884         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
 885         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
 886         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
 887         rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 888
 889         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 890         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
 891         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
 892         rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
 893         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
 894         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 895
 896         rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
 897         rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
 898
 899         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 900                 return -EBUSY;
 901
 902         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 903         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 904         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 905         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 906         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 907
 908         if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
 909                 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 910                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
 911         } else {
 912                 reg = 0;
 913                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 1);
 914                 rt2x00_set_field16(&reg, PHY_CSR2_LNA_MODE, 3);
 915         }
 916         rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
 917
 918         rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
 919         rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
 920         rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
 921         rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
 922
 923         rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 924         rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
 925                            rt2x00dev->rx->data_size);
 926         rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
 927
 928         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 929         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 930         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
 931         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 932
 933         rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 934         rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
 935         rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 936
 937         rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
 938         rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
 939         rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
 940
 941         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 942         rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
 943         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 944
 945         return 0;
 946 }
 947
 948 static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
 949 {
 950         unsigned int i;
 951         u8 value;
 952
 953         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 954                 rt2500usb_bbp_read(rt2x00dev, 0, &value);
 955                 if ((value != 0xff) && (value != 0x00))
 956                         return 0;
 957                 udelay(REGISTER_BUSY_DELAY);
 958         }
 959
 960         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 961         return -EACCES;
 962 }
 963
 964 static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 965 {
 966         unsigned int i;
 967         u16 eeprom;
 968         u8 value;
 969         u8 reg_id;
 970
 971         if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev)))
 972                 return -EACCES;
 973
 974         rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
 975         rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
 976         rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
 977         rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
 978         rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
 979         rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
 980         rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
 981         rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
 982         rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
 983         rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
 984         rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
 985         rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
 986         rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
 987         rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
 988         rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
 989         rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
 990         rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
 991         rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
 992         rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
 993         rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
 994         rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
 995         rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
 996         rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
 997         rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
 998         rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
 999         rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
1000         rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
1001         rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
1002         rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
1003         rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
1004         rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
1005
1006         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1007                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1008
1009                 if (eeprom != 0xffff && eeprom != 0x0000) {
1010                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1011                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1012                         rt2500usb_bbp_write(rt2x00dev, reg_id, value);
1013                 }
1014         }
1015
1016         return 0;
1017 }
1018
1019 /*
1020  * Device state switch handlers.
1021  */
1022 static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1023                                 enum dev_state state)
1024 {
1025         u16 reg;
1026
1027         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
1028         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
1029                            (state == STATE_RADIO_RX_OFF) ||
1030                            (state == STATE_RADIO_RX_OFF_LINK));
1031         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
1032 }
1033
1034 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1035 {
1036         /*
1037          * Initialize all registers.
1038          */
1039         if (unlikely(rt2500usb_init_registers(rt2x00dev) ||
1040                      rt2500usb_init_bbp(rt2x00dev)))
1041                 return -EIO;
1042
1043         return 0;
1044 }
1045
1046 static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1047 {
1048         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
1049         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
1050
1051         /*
1052          * Disable synchronisation.
1053          */
1054         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1055
1056         rt2x00usb_disable_radio(rt2x00dev);
1057 }
1058
1059 static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
1060                                enum dev_state state)
1061 {
1062         u16 reg;
1063         u16 reg2;
1064         unsigned int i;
1065         char put_to_sleep;
1066         char bbp_state;
1067         char rf_state;
1068
1069         put_to_sleep = (state != STATE_AWAKE);
1070
1071         reg = 0;
1072         rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
1073         rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
1074         rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
1075         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1076         rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
1077         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1078
1079         /*
1080          * Device is not guaranteed to be in the requested state yet.
1081          * We must wait until the register indicates that the
1082          * device has entered the correct state.
1083          */
1084         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1085                 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
1086                 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
1087                 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
1088                 if (bbp_state == state && rf_state == state)
1089                         return 0;
1090                 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1091                 msleep(30);
1092         }
1093
1094         return -EBUSY;
1095 }
1096
1097 static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1098                                       enum dev_state state)
1099 {
1100         int retval = 0;
1101
1102         switch (state) {
1103         case STATE_RADIO_ON:
1104                 retval = rt2500usb_enable_radio(rt2x00dev);
1105                 break;
1106         case STATE_RADIO_OFF:
1107                 rt2500usb_disable_radio(rt2x00dev);
1108                 break;
1109         case STATE_RADIO_RX_ON:
1110         case STATE_RADIO_RX_ON_LINK:
1111         case STATE_RADIO_RX_OFF:
1112         case STATE_RADIO_RX_OFF_LINK:
1113                 rt2500usb_toggle_rx(rt2x00dev, state);
1114                 break;
1115         case STATE_RADIO_IRQ_ON:
1116         case STATE_RADIO_IRQ_OFF:
1117                 /* No support, but no error either */
1118                 break;
1119         case STATE_DEEP_SLEEP:
1120         case STATE_SLEEP:
1121         case STATE_STANDBY:
1122         case STATE_AWAKE:
1123                 retval = rt2500usb_set_state(rt2x00dev, state);
1124                 break;
1125         default:
1126                 retval = -ENOTSUPP;
1127                 break;
1128         }
1129
1130         if (unlikely(retval))
1131                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1132                       state, retval);
1133
1134         return retval;
1135 }
1136
1137 /*
1138  * TX descriptor initialization
1139  */
1140 static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1141                                     struct sk_buff *skb,
1142                                     struct txentry_desc *txdesc)
1143 {
1144         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1145         __le32 *txd = skbdesc->desc;
1146         u32 word;
1147
1148         /*
1149          * Start writing the descriptor words.
1150          */
1151         rt2x00_desc_read(txd, 1, &word);
1152         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
1153         rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
1154         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1155         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1156         rt2x00_desc_write(txd, 1, word);
1157
1158         rt2x00_desc_read(txd, 2, &word);
1159         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1160         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1161         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1162         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1163         rt2x00_desc_write(txd, 2, word);
1164
1165         if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1166                 _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
1167                 _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
1168         }
1169
1170         rt2x00_desc_read(txd, 0, &word);
1171         rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
1172         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1173                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1174         rt2x00_set_field32(&word, TXD_W0_ACK,
1175                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1176         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1177                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1178         rt2x00_set_field32(&word, TXD_W0_OFDM,
1179                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1180         rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1181                            test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
1182         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1183         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
1184         rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
1185         rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
1186         rt2x00_desc_write(txd, 0, word);
1187 }
1188
1189 /*
1190  * TX data initialization
1191  */
1192 static void rt2500usb_beacondone(struct urb *urb);
1193
1194 static void rt2500usb_write_beacon(struct queue_entry *entry)
1195 {
1196         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1197         struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
1198         struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
1199         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1200         int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
1201         int length;
1202         u16 reg;
1203
1204         /*
1205          * Add the descriptor in front of the skb.
1206          */
1207         skb_push(entry->skb, entry->queue->desc_size);
1208         memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
1209         skbdesc->desc = entry->skb->data;
1210
1211         /*
1212          * Disable beaconing while we are reloading the beacon data,
1213          * otherwise we might be sending out invalid data.
1214          */
1215         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1216         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
1217         rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
1218         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
1219         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1220
1221         /*
1222          * USB devices cannot blindly pass the skb->len as the
1223          * length of the data to usb_fill_bulk_urb. Pass the skb
1224          * to the driver to determine what the length should be.
1225          */
1226         length = rt2x00dev->ops->lib->get_tx_data_len(entry);
1227
1228         usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
1229                           entry->skb->data, length, rt2500usb_beacondone,
1230                           entry);
1231
1232         /*
1233          * Second we need to create the guardian byte.
1234          * We only need a single byte, so lets recycle
1235          * the 'flags' field we are not using for beacons.
1236          */
1237         bcn_priv->guardian_data = 0;
1238         usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
1239                           &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
1240                           entry);
1241
1242         /*
1243          * Send out the guardian byte.
1244          */
1245         usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
1246 }
1247
1248 static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
1249 {
1250         int length;
1251
1252         /*
1253          * The length _must_ be a multiple of 2,
1254          * but it must _not_ be a multiple of the USB packet size.
1255          */
1256         length = roundup(entry->skb->len, 2);
1257         length += (2 * !(length % entry->queue->usb_maxpacket));
1258
1259         return length;
1260 }
1261
1262 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1263                                     const enum data_queue_qid queue)
1264 {
1265         u16 reg;
1266
1267         if (queue != QID_BEACON) {
1268                 rt2x00usb_kick_tx_queue(rt2x00dev, queue);
1269                 return;
1270         }
1271
1272         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1273         if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1274                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
1275                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
1276                 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1277                 /*
1278                  * Beacon generation will fail initially.
1279                  * To prevent this we need to register the TXRX_CSR19
1280                  * register several times.
1281                  */
1282                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1283                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1284                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1285                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1286                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1287         }
1288 }
1289
1290 /*
1291  * RX control handlers
1292  */
1293 static void rt2500usb_fill_rxdone(struct queue_entry *entry,
1294                                   struct rxdone_entry_desc *rxdesc)
1295 {
1296         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1297         struct queue_entry_priv_usb *entry_priv = entry->priv_data;
1298         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1299         __le32 *rxd =
1300             (__le32 *)(entry->skb->data +
1301                        (entry_priv->urb->actual_length -
1302                         entry->queue->desc_size));
1303         u32 word0;
1304         u32 word1;
1305
1306         /*
1307          * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1308          * frame data in rt2x00usb.
1309          */
1310         memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
1311         rxd = (__le32 *)skbdesc->desc;
1312
1313         /*
1314          * It is now safe to read the descriptor on all architectures.
1315          */
1316         rt2x00_desc_read(rxd, 0, &word0);
1317         rt2x00_desc_read(rxd, 1, &word1);
1318
1319         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1320                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1321         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1322                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1323
1324         if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
1325                 rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
1326                 if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1327                         rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
1328         }
1329
1330         if (rxdesc->cipher != CIPHER_NONE) {
1331                 _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
1332                 _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]);
1333                 rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
1334
1335                 /* ICV is located at the end of frame */
1336
1337                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
1338                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
1339                         rxdesc->flags |= RX_FLAG_DECRYPTED;
1340                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
1341                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
1342         }
1343
1344         /*
1345          * Obtain the status about this packet.
1346          * When frame was received with an OFDM bitrate,
1347          * the signal is the PLCP value. If it was received with
1348          * a CCK bitrate the signal is the rate in 100kbit/s.
1349          */
1350         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1351         rxdesc->rssi =
1352             rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset;
1353         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1354
1355         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1356                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1357         else
1358                 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
1359         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1360                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1361
1362         /*
1363          * Adjust the skb memory window to the frame boundaries.
1364          */
1365         skb_trim(entry->skb, rxdesc->size);
1366 }
1367
1368 /*
1369  * Interrupt functions.
1370  */
1371 static void rt2500usb_beacondone(struct urb *urb)
1372 {
1373         struct queue_entry *entry = (struct queue_entry *)urb->context;
1374         struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
1375
1376         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
1377                 return;
1378
1379         /*
1380          * Check if this was the guardian beacon,
1381          * if that was the case we need to send the real beacon now.
1382          * Otherwise we should free the sk_buffer, the device
1383          * should be doing the rest of the work now.
1384          */
1385         if (bcn_priv->guardian_urb == urb) {
1386                 usb_submit_urb(bcn_priv->urb, GFP_ATOMIC);
1387         } else if (bcn_priv->urb == urb) {
1388                 dev_kfree_skb(entry->skb);
1389                 entry->skb = NULL;
1390         }
1391 }
1392
1393 /*
1394  * Device probe functions.
1395  */
1396 static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1397 {
1398         u16 word;
1399         u8 *mac;
1400         u8 bbp;
1401
1402         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1403
1404         /*
1405          * Start validation of the data that has been read.
1406          */
1407         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1408         if (!is_valid_ether_addr(mac)) {
1409                 random_ether_addr(mac);
1410                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
1411         }
1412
1413         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1414         if (word == 0xffff) {
1415                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1416                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1417                                    ANTENNA_SW_DIVERSITY);
1418                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1419                                    ANTENNA_SW_DIVERSITY);
1420                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1421                                    LED_MODE_DEFAULT);
1422                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1423                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1424                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1425                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1426                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1427         }
1428
1429         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1430         if (word == 0xffff) {
1431                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1432                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1433                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1434                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1435                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1436         }
1437
1438         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1439         if (word == 0xffff) {
1440                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1441                                    DEFAULT_RSSI_OFFSET);
1442                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1443                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1444         }
1445
1446         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1447         if (word == 0xffff) {
1448                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1449                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1450                 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1451         }
1452
1453         /*
1454          * Switch lower vgc bound to current BBP R17 value,
1455          * lower the value a bit for better quality.
1456          */
1457         rt2500usb_bbp_read(rt2x00dev, 17, &bbp);
1458         bbp -= 6;
1459
1460         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1461         if (word == 0xffff) {
1462                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1463                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1464                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1465                 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1466         } else {
1467                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1468                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1469         }
1470
1471         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1472         if (word == 0xffff) {
1473                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1474                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1475                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1476                 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1477         }
1478
1479         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1480         if (word == 0xffff) {
1481                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1482                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1483                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1484                 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1485         }
1486
1487         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1488         if (word == 0xffff) {
1489                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1490                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1491                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1492                 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1493         }
1494
1495         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1496         if (word == 0xffff) {
1497                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1498                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1499                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1500                 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1501         }
1502
1503         return 0;
1504 }
1505
1506 static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1507 {
1508         u16 reg;
1509         u16 value;
1510         u16 eeprom;
1511
1512         /*
1513          * Read EEPROM word for configuration.
1514          */
1515         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1516
1517         /*
1518          * Identify RF chipset.
1519          */
1520         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1521         rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1522         rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1523
1524         if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
1525                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1526                 return -ENODEV;
1527         }
1528
1529         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1530             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1531             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1532             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1533             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1534             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1535                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1536                 return -ENODEV;
1537         }
1538
1539         /*
1540          * Identify default antenna configuration.
1541          */
1542         rt2x00dev->default_ant.tx =
1543             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1544         rt2x00dev->default_ant.rx =
1545             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1546
1547         /*
1548          * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
1549          * I am not 100% sure about this, but the legacy drivers do not
1550          * indicate antenna swapping in software is required when
1551          * diversity is enabled.
1552          */
1553         if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
1554                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
1555         if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
1556                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
1557
1558         /*
1559          * Store led mode, for correct led behaviour.
1560          */
1561 #ifdef CONFIG_RT2X00_LIB_LEDS
1562         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1563
1564         rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1565         if (value == LED_MODE_TXRX_ACTIVITY)
1566                 rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
1567                                    LED_TYPE_ACTIVITY);
1568 #endif /* CONFIG_RT2X00_LIB_LEDS */
1569
1570         /*
1571          * Check if the BBP tuning should be disabled.
1572          */
1573         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1574         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1575                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1576
1577         /*
1578          * Read the RSSI <-> dBm offset information.
1579          */
1580         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1581         rt2x00dev->rssi_offset =
1582             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1583
1584         return 0;
1585 }
1586
1587 /*
1588  * RF value list for RF2522
1589  * Supports: 2.4 GHz
1590  */
1591 static const struct rf_channel rf_vals_bg_2522[] = {
1592         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1593         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1594         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1595         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1596         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1597         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1598         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1599         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1600         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1601         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1602         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1603         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1604         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1605         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1606 };
1607
1608 /*
1609  * RF value list for RF2523
1610  * Supports: 2.4 GHz
1611  */
1612 static const struct rf_channel rf_vals_bg_2523[] = {
1613         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1614         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1615         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1616         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1617         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1618         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1619         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1620         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1621         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1622         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1623         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1624         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1625         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1626         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1627 };
1628
1629 /*
1630  * RF value list for RF2524
1631  * Supports: 2.4 GHz
1632  */
1633 static const struct rf_channel rf_vals_bg_2524[] = {
1634         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1635         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1636         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1637         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1638         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1639         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1640         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1641         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1642         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1643         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1644         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1645         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1646         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1647         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1648 };
1649
1650 /*
1651  * RF value list for RF2525
1652  * Supports: 2.4 GHz
1653  */
1654 static const struct rf_channel rf_vals_bg_2525[] = {
1655         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1656         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1657         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1658         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1659         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1660         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1661         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1662         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1663         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1664         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1665         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1666         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1667         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1668         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1669 };
1670
1671 /*
1672  * RF value list for RF2525e
1673  * Supports: 2.4 GHz
1674  */
1675 static const struct rf_channel rf_vals_bg_2525e[] = {
1676         { 1,  0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1677         { 2,  0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1678         { 3,  0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1679         { 4,  0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1680         { 5,  0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1681         { 6,  0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1682         { 7,  0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1683         { 8,  0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1684         { 9,  0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1685         { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1686         { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1687         { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1688         { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1689         { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1690 };
1691
1692 /*
1693  * RF value list for RF5222
1694  * Supports: 2.4 GHz & 5.2 GHz
1695  */
1696 static const struct rf_channel rf_vals_5222[] = {
1697         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1698         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1699         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1700         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1701         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1702         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1703         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1704         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1705         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1706         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1707         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1708         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1709         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1710         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1711
1712         /* 802.11 UNI / HyperLan 2 */
1713         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1714         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1715         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1716         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1717         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1718         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1719         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1720         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1721
1722         /* 802.11 HyperLan 2 */
1723         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1724         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1725         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1726         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1727         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1728         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1729         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1730         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1731         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1732         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1733
1734         /* 802.11 UNII */
1735         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1736         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1737         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1738         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1739         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1740 };
1741
1742 static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1743 {
1744         struct hw_mode_spec *spec = &rt2x00dev->spec;
1745         struct channel_info *info;
1746         char *tx_power;
1747         unsigned int i;
1748
1749         /*
1750          * Initialize all hw fields.
1751          */
1752         rt2x00dev->hw->flags =
1753             IEEE80211_HW_RX_INCLUDES_FCS |
1754             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1755             IEEE80211_HW_SIGNAL_DBM;
1756
1757         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1758
1759         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
1760         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1761                                 rt2x00_eeprom_addr(rt2x00dev,
1762                                                    EEPROM_MAC_ADDR_0));
1763
1764         /*
1765          * Initialize hw_mode information.
1766          */
1767         spec->supported_bands = SUPPORT_BAND_2GHZ;
1768         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1769
1770         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1771                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1772                 spec->channels = rf_vals_bg_2522;
1773         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1774                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1775                 spec->channels = rf_vals_bg_2523;
1776         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1777                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1778                 spec->channels = rf_vals_bg_2524;
1779         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1780                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1781                 spec->channels = rf_vals_bg_2525;
1782         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1783                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1784                 spec->channels = rf_vals_bg_2525e;
1785         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1786                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1787                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1788                 spec->channels = rf_vals_5222;
1789         }
1790
1791         /*
1792          * Create channel information array
1793          */
1794         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
1795         if (!info)
1796                 return -ENOMEM;
1797
1798         spec->channels_info = info;
1799
1800         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1801         for (i = 0; i < 14; i++)
1802                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
1803
1804         if (spec->num_channels > 14) {
1805                 for (i = 14; i < spec->num_channels; i++)
1806                         info[i].tx_power1 = DEFAULT_TXPOWER;
1807         }
1808
1809         return 0;
1810 }
1811
1812 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1813 {
1814         int retval;
1815
1816         /*
1817          * Allocate eeprom data.
1818          */
1819         retval = rt2500usb_validate_eeprom(rt2x00dev);
1820         if (retval)
1821                 return retval;
1822
1823         retval = rt2500usb_init_eeprom(rt2x00dev);
1824         if (retval)
1825                 return retval;
1826
1827         /*
1828          * Initialize hw specifications.
1829          */
1830         retval = rt2500usb_probe_hw_mode(rt2x00dev);
1831         if (retval)
1832                 return retval;
1833
1834         /*
1835          * This device requires the atim queue
1836          */
1837         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1838         __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
1839         __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
1840         if (!modparam_nohwcrypt) {
1841                 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
1842                 __set_bit(CONFIG_CRYPTO_COPY_IV, &rt2x00dev->flags);
1843         }
1844         __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1845
1846         /*
1847          * Set the rssi offset.
1848          */
1849         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1850
1851         return 0;
1852 }
1853
1854 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1855         .tx                     = rt2x00mac_tx,
1856         .start                  = rt2x00mac_start,
1857         .stop                   = rt2x00mac_stop,
1858         .add_interface          = rt2x00mac_add_interface,
1859         .remove_interface       = rt2x00mac_remove_interface,
1860         .config                 = rt2x00mac_config,
1861         .config_interface       = rt2x00mac_config_interface,
1862         .configure_filter       = rt2x00mac_configure_filter,
1863         .set_key                = rt2x00mac_set_key,
1864         .get_stats              = rt2x00mac_get_stats,
1865         .bss_info_changed       = rt2x00mac_bss_info_changed,
1866         .conf_tx                = rt2x00mac_conf_tx,
1867         .get_tx_stats           = rt2x00mac_get_tx_stats,
1868 };
1869
1870 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1871         .probe_hw               = rt2500usb_probe_hw,
1872         .initialize             = rt2x00usb_initialize,
1873         .uninitialize           = rt2x00usb_uninitialize,
1874         .clear_entry            = rt2x00usb_clear_entry,
1875         .set_device_state       = rt2500usb_set_device_state,
1876         .link_stats             = rt2500usb_link_stats,
1877         .reset_tuner            = rt2500usb_reset_tuner,
1878         .link_tuner             = rt2500usb_link_tuner,
1879         .write_tx_desc          = rt2500usb_write_tx_desc,
1880         .write_tx_data          = rt2x00usb_write_tx_data,
1881         .write_beacon           = rt2500usb_write_beacon,
1882         .get_tx_data_len        = rt2500usb_get_tx_data_len,
1883         .kick_tx_queue          = rt2500usb_kick_tx_queue,
1884         .fill_rxdone            = rt2500usb_fill_rxdone,
1885         .config_shared_key      = rt2500usb_config_key,
1886         .config_pairwise_key    = rt2500usb_config_key,
1887         .config_filter          = rt2500usb_config_filter,
1888         .config_intf            = rt2500usb_config_intf,
1889         .config_erp             = rt2500usb_config_erp,
1890         .config_ant             = rt2500usb_config_ant,
1891         .config                 = rt2500usb_config,
1892 };
1893
1894 static const struct data_queue_desc rt2500usb_queue_rx = {
1895         .entry_num              = RX_ENTRIES,
1896         .data_size              = DATA_FRAME_SIZE,
1897         .desc_size              = RXD_DESC_SIZE,
1898         .priv_size              = sizeof(struct queue_entry_priv_usb),
1899 };
1900
1901 static const struct data_queue_desc rt2500usb_queue_tx = {
1902         .entry_num              = TX_ENTRIES,
1903         .data_size              = DATA_FRAME_SIZE,
1904         .desc_size              = TXD_DESC_SIZE,
1905         .priv_size              = sizeof(struct queue_entry_priv_usb),
1906 };
1907
1908 static const struct data_queue_desc rt2500usb_queue_bcn = {
1909         .entry_num              = BEACON_ENTRIES,
1910         .data_size              = MGMT_FRAME_SIZE,
1911         .desc_size              = TXD_DESC_SIZE,
1912         .priv_size              = sizeof(struct queue_entry_priv_usb_bcn),
1913 };
1914
1915 static const struct data_queue_desc rt2500usb_queue_atim = {
1916         .entry_num              = ATIM_ENTRIES,
1917         .data_size              = DATA_FRAME_SIZE,
1918         .desc_size              = TXD_DESC_SIZE,
1919         .priv_size              = sizeof(struct queue_entry_priv_usb),
1920 };
1921
1922 static const struct rt2x00_ops rt2500usb_ops = {
1923         .name           = KBUILD_MODNAME,
1924         .max_sta_intf   = 1,
1925         .max_ap_intf    = 1,
1926         .eeprom_size    = EEPROM_SIZE,
1927         .rf_size        = RF_SIZE,
1928         .tx_queues      = NUM_TX_QUEUES,
1929         .rx             = &rt2500usb_queue_rx,
1930         .tx             = &rt2500usb_queue_tx,
1931         .bcn            = &rt2500usb_queue_bcn,
1932         .atim           = &rt2500usb_queue_atim,
1933         .lib            = &rt2500usb_rt2x00_ops,
1934         .hw             = &rt2500usb_mac80211_ops,
1935 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1936         .debugfs        = &rt2500usb_rt2x00debug,
1937 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1938 };
1939
1940 /*
1941  * rt2500usb module information.
1942  */
1943 static struct usb_device_id rt2500usb_device_table[] = {
1944         /* ASUS */
1945         { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1946         { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1947         /* Belkin */
1948         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1949         { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1950         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1951         /* Cisco Systems */
1952         { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1953         { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1954         { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1955         /* Conceptronic */
1956         { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1957         /* D-LINK */
1958         { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1959         /* Gigabyte */
1960         { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1961         { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1962         /* Hercules */
1963         { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1964         /* Melco */
1965         { USB_DEVICE(0x0411, 0x005e), USB_DEVICE_DATA(&rt2500usb_ops) },
1966         { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1967         { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1968         { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1969         { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1970         /* MSI */
1971         { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1972         { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1973         { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1974         /* Ralink */
1975         { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1976         { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1977         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1978         { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1979         /* Siemens */
1980         { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1981         /* SMC */
1982         { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1983         /* Spairon */
1984         { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1985         /* Trust */
1986         { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1987         /* Zinwell */
1988         { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1989         { 0, }
1990 };
1991
1992 MODULE_AUTHOR(DRV_PROJECT);
1993 MODULE_VERSION(DRV_VERSION);
1994 MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1995 MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1996 MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1997 MODULE_LICENSE("GPL");
1998
1999 static struct usb_driver rt2500usb_driver = {
2000         .name           = KBUILD_MODNAME,
2001         .id_table       = rt2500usb_device_table,
2002         .probe          = rt2x00usb_probe,
2003         .disconnect     = rt2x00usb_disconnect,
2004         .suspend        = rt2x00usb_suspend,
2005         .resume         = rt2x00usb_resume,
2006 };
2007
2008 static int __init rt2500usb_init(void)
2009 {
2010         return usb_register(&rt2500usb_driver);
2011 }
2012
2013 static void __exit rt2500usb_exit(void)
2014 {
2015         usb_deregister(&rt2500usb_driver);
2016 }
2017
2018 module_init(rt2500usb_init);
2019 module_exit(rt2500usb_exit);