SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500usb.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500usb
  23         Abstract: rt2500usb device specific routines.
  24         Supported chipsets: RT2570.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/usb.h>
  33
  34 #include "rt2x00.h"
  35 #include "rt2x00usb.h"
  36 #include "rt2500usb.h"
  37
  38 /*
  39  * Register access.
  40  * All access to the CSR registers will go through the methods
  41  * rt2500usb_register_read and rt2500usb_register_write.
  42  * BBP and RF register require indirect register access,
  43  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  44  * These indirect registers work with busy bits,
  45  * and we will try maximal REGISTER_BUSY_COUNT times to access
  46  * the register while taking a REGISTER_BUSY_DELAY us delay
  47  * between each attampt. When the busy bit is still set at that time,
  48  * the access attempt is considered to have failed,
  49  * and we will print an error.
  50  * If the usb_cache_mutex is already held then the _lock variants must
  51  * be used instead.
  52  */
  53 static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
  54                                            const unsigned int offset,
  55                                            u16 *value)
  56 {
  57         __le16 reg;
  58         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  59                                       USB_VENDOR_REQUEST_IN, offset,
  60                                       &reg, sizeof(u16), REGISTER_TIMEOUT);
  61         *value = le16_to_cpu(reg);
  62 }
  63
  64 static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
  65                                                 const unsigned int offset,
  66                                                 u16 *value)
  67 {
  68         __le16 reg;
  69         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
  70                                        USB_VENDOR_REQUEST_IN, offset,
  71                                        &reg, sizeof(u16), REGISTER_TIMEOUT);
  72         *value = le16_to_cpu(reg);
  73 }
  74
  75 static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
  76                                                 const unsigned int offset,
  77                                                 void *value, const u16 length)
  78 {
  79         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  80                                       USB_VENDOR_REQUEST_IN, offset,
  81                                       value, length,
  82                                       REGISTER_TIMEOUT16(length));
  83 }
  84
  85 static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
  86                                             const unsigned int offset,
  87                                             u16 value)
  88 {
  89         __le16 reg = cpu_to_le16(value);
  90         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  91                                       USB_VENDOR_REQUEST_OUT, offset,
  92                                       &reg, sizeof(u16), REGISTER_TIMEOUT);
  93 }
  94
  95 static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
  96                                                  const unsigned int offset,
  97                                                  u16 value)
  98 {
  99         __le16 reg = cpu_to_le16(value);
 100         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 101                                        USB_VENDOR_REQUEST_OUT, offset,
 102                                        &reg, sizeof(u16), REGISTER_TIMEOUT);
 103 }
 104
 105 static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 106                                                  const unsigned int offset,
 107                                                  void *value, const u16 length)
 108 {
 109         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 110                                       USB_VENDOR_REQUEST_OUT, offset,
 111                                       value, length,
 112                                       REGISTER_TIMEOUT16(length));
 113 }
 114
 115 static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev)
 116 {
 117         u16 reg;
 118         unsigned int i;
 119
 120         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 121                 rt2500usb_register_read_lock(rt2x00dev, PHY_CSR8, &reg);
 122                 if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
 123                         break;
 124                 udelay(REGISTER_BUSY_DELAY);
 125         }
 126
 127         return reg;
 128 }
 129
 130 static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 131                                 const unsigned int word, const u8 value)
 132 {
 133         u16 reg;
 134
 135         mutex_lock(&rt2x00dev->usb_cache_mutex);
 136
 137         /*
 138          * Wait until the BBP becomes ready.
 139          */
 140         reg = rt2500usb_bbp_check(rt2x00dev);
 141         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 142                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 143                 mutex_unlock(&rt2x00dev->usb_cache_mutex);
 144                 return;
 145         }
 146
 147         /*
 148          * Write the data into the BBP.
 149          */
 150         reg = 0;
 151         rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
 152         rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 153         rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
 154
 155         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 156
 157         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 158 }
 159
 160 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 161                                const unsigned int word, u8 *value)
 162 {
 163         u16 reg;
 164
 165         mutex_lock(&rt2x00dev->usb_cache_mutex);
 166
 167         /*
 168          * Wait until the BBP becomes ready.
 169          */
 170         reg = rt2500usb_bbp_check(rt2x00dev);
 171         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 172                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
 173                 return;
 174         }
 175
 176         /*
 177          * Write the request into the BBP.
 178          */
 179         reg = 0;
 180         rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 181         rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
 182
 183         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 184
 185         /*
 186          * Wait until the BBP becomes ready.
 187          */
 188         reg = rt2500usb_bbp_check(rt2x00dev);
 189         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 190                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
 191                 *value = 0xff;
 192                 mutex_unlock(&rt2x00dev->usb_cache_mutex);
 193                 return;
 194         }
 195
 196         rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
 197         *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 198
 199         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 200 }
 201
 202 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
 203                                const unsigned int word, const u32 value)
 204 {
 205         u16 reg;
 206         unsigned int i;
 207
 208         if (!word)
 209                 return;
 210
 211         mutex_lock(&rt2x00dev->usb_cache_mutex);
 212
 213         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 214                 rt2500usb_register_read_lock(rt2x00dev, PHY_CSR10, &reg);
 215                 if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
 216                         goto rf_write;
 217                 udelay(REGISTER_BUSY_DELAY);
 218         }
 219
 220         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 221         ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
 222         return;
 223
 224 rf_write:
 225         reg = 0;
 226         rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
 227         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
 228
 229         reg = 0;
 230         rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
 231         rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
 232         rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
 233         rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
 234
 235         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
 236         rt2x00_rf_write(rt2x00dev, word, value);
 237
 238         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 239 }
 240
 241 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 242 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
 243
 244 static void rt2500usb_read_csr(struct rt2x00_dev *rt2x00dev,
 245                                const unsigned int word, u32 *data)
 246 {
 247         rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
 248 }
 249
 250 static void rt2500usb_write_csr(struct rt2x00_dev *rt2x00dev,
 251                                 const unsigned int word, u32 data)
 252 {
 253         rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
 254 }
 255
 256 static const struct rt2x00debug rt2500usb_rt2x00debug = {
 257         .owner  = THIS_MODULE,
 258         .csr    = {
 259                 .read           = rt2500usb_read_csr,
 260                 .write          = rt2500usb_write_csr,
 261                 .word_size      = sizeof(u16),
 262                 .word_count     = CSR_REG_SIZE / sizeof(u16),
 263         },
 264         .eeprom = {
 265                 .read           = rt2x00_eeprom_read,
 266                 .write          = rt2x00_eeprom_write,
 267                 .word_size      = sizeof(u16),
 268                 .word_count     = EEPROM_SIZE / sizeof(u16),
 269         },
 270         .bbp    = {
 271                 .read           = rt2500usb_bbp_read,
 272                 .write          = rt2500usb_bbp_write,
 273                 .word_size      = sizeof(u8),
 274                 .word_count     = BBP_SIZE / sizeof(u8),
 275         },
 276         .rf     = {
 277                 .read           = rt2x00_rf_read,
 278                 .write          = rt2500usb_rf_write,
 279                 .word_size      = sizeof(u32),
 280                 .word_count     = RF_SIZE / sizeof(u32),
 281         },
 282 };
 283 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 284
 285 #ifdef CONFIG_RT2500USB_LEDS
 286 static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
 287                                      enum led_brightness brightness)
 288 {
 289         struct rt2x00_led *led =
 290             container_of(led_cdev, struct rt2x00_led, led_dev);
 291         unsigned int enabled = brightness != LED_OFF;
 292         u16 reg;
 293
 294         rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, &reg);
 295
 296         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 297                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, enabled);
 298         else if (led->type == LED_TYPE_ACTIVITY)
 299                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, enabled);
 300
 301         rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg);
 302 }
 303
 304 static int rt2500usb_blink_set(struct led_classdev *led_cdev,
 305                                unsigned long *delay_on,
 306                                unsigned long *delay_off)
 307 {
 308         struct rt2x00_led *led =
 309             container_of(led_cdev, struct rt2x00_led, led_dev);
 310         u16 reg;
 311
 312         rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, &reg);
 313         rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, *delay_on);
 314         rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, *delay_off);
 315         rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg);
 316
 317         return 0;
 318 }
 319
 320 static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
 321                                struct rt2x00_led *led,
 322                                enum led_type type)
 323 {
 324         led->rt2x00dev = rt2x00dev;
 325         led->type = type;
 326         led->led_dev.brightness_set = rt2500usb_brightness_set;
 327         led->led_dev.blink_set = rt2500usb_blink_set;
 328         led->flags = LED_INITIALIZED;
 329 }
 330 #endif /* CONFIG_RT2500USB_LEDS */
 331
 332 /*
 333  * Configuration handlers.
 334  */
 335 static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
 336                                     const unsigned int filter_flags)
 337 {
 338         u16 reg;
 339
 340         /*
 341          * Start configuration steps.
 342          * Note that the version error will always be dropped
 343          * and broadcast frames will always be accepted since
 344          * there is no filter for it at this time.
 345          */
 346         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 347         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC,
 348                            !(filter_flags & FIF_FCSFAIL));
 349         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL,
 350                            !(filter_flags & FIF_PLCPFAIL));
 351         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
 352                            !(filter_flags & FIF_CONTROL));
 353         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME,
 354                            !(filter_flags & FIF_PROMISC_IN_BSS));
 355         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
 356                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 357                            !rt2x00dev->intf_ap_count);
 358         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
 359         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
 360                            !(filter_flags & FIF_ALLMULTI));
 361         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, 0);
 362         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 363 }
 364
 365 static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
 366                                   struct rt2x00_intf *intf,
 367                                   struct rt2x00intf_conf *conf,
 368                                   const unsigned int flags)
 369 {
 370         unsigned int bcn_preload;
 371         u16 reg;
 372
 373         if (flags & CONFIG_UPDATE_TYPE) {
 374                 /*
 375                  * Enable beacon config
 376                  */
 377                 bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
 378                 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
 379                 rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
 380                 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
 381                                    2 * (conf->type != IEEE80211_IF_TYPE_STA));
 382                 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
 383
 384                 /*
 385                  * Enable synchronisation.
 386                  */
 387                 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 388                 rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
 389                 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 390
 391                 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 392                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
 393                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, conf->sync);
 394                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
 395                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 396         }
 397
 398         if (flags & CONFIG_UPDATE_MAC)
 399                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac,
 400                                               (3 * sizeof(__le16)));
 401
 402         if (flags & CONFIG_UPDATE_BSSID)
 403                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid,
 404                                               (3 * sizeof(__le16)));
 405 }
 406
 407 static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 408                                  struct rt2x00lib_erp *erp)
 409 {
 410         u16 reg;
 411
 412         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 413         rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout);
 414         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 415
 416         rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
 417         rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
 418                            !!erp->short_preamble);
 419         rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
 420 }
 421
 422 static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
 423                                      const int basic_rate_mask)
 424 {
 425         rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask);
 426 }
 427
 428 static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
 429                                      struct rf_channel *rf, const int txpower)
 430 {
 431         /*
 432          * Set TXpower.
 433          */
 434         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 435
 436         /*
 437          * For RT2525E we should first set the channel to half band higher.
 438          */
 439         if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
 440                 static const u32 vals[] = {
 441                         0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
 442                         0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
 443                         0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
 444                         0x00000902, 0x00000906
 445                 };
 446
 447                 rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 448                 if (rf->rf4)
 449                         rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 450         }
 451
 452         rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
 453         rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
 454         rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
 455         if (rf->rf4)
 456                 rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 457 }
 458
 459 static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 460                                      const int txpower)
 461 {
 462         u32 rf3;
 463
 464         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 465         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 466         rt2500usb_rf_write(rt2x00dev, 3, rf3);
 467 }
 468
 469 static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
 470                                      struct antenna_setup *ant)
 471 {
 472         u8 r2;
 473         u8 r14;
 474         u16 csr5;
 475         u16 csr6;
 476
 477         /*
 478          * We should never come here because rt2x00lib is supposed
 479          * to catch this and send us the correct antenna explicitely.
 480          */
 481         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 482                ant->tx == ANTENNA_SW_DIVERSITY);
 483
 484         rt2500usb_bbp_read(rt2x00dev, 2, &r2);
 485         rt2500usb_bbp_read(rt2x00dev, 14, &r14);
 486         rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
 487         rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
 488
 489         /*
 490          * Configure the TX antenna.
 491          */
 492         switch (ant->tx) {
 493         case ANTENNA_HW_DIVERSITY:
 494                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
 495                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
 496                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
 497                 break;
 498         case ANTENNA_A:
 499                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 500                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
 501                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
 502                 break;
 503         case ANTENNA_B:
 504         default:
 505                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 506                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
 507                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
 508                 break;
 509         }
 510
 511         /*
 512          * Configure the RX antenna.
 513          */
 514         switch (ant->rx) {
 515         case ANTENNA_HW_DIVERSITY:
 516                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
 517                 break;
 518         case ANTENNA_A:
 519                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 520                 break;
 521         case ANTENNA_B:
 522         default:
 523                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 524                 break;
 525         }
 526
 527         /*
 528          * RT2525E and RT5222 need to flip TX I/Q
 529          */
 530         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 531             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 532                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 533                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
 534                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
 535
 536                 /*
 537                  * RT2525E does not need RX I/Q Flip.
 538                  */
 539                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 540                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 541         } else {
 542                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
 543                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
 544         }
 545
 546         rt2500usb_bbp_write(rt2x00dev, 2, r2);
 547         rt2500usb_bbp_write(rt2x00dev, 14, r14);
 548         rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
 549         rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
 550 }
 551
 552 static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
 553                                       struct rt2x00lib_conf *libconf)
 554 {
 555         u16 reg;
 556
 557         rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time);
 558         rt2500usb_register_write(rt2x00dev, MAC_CSR11, libconf->sifs);
 559         rt2500usb_register_write(rt2x00dev, MAC_CSR12, libconf->eifs);
 560
 561         rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 562         rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
 563                            libconf->conf->beacon_int * 4);
 564         rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 565 }
 566
 567 static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 568                              struct rt2x00lib_conf *libconf,
 569                              const unsigned int flags)
 570 {
 571         if (flags & CONFIG_UPDATE_PHYMODE)
 572                 rt2500usb_config_phymode(rt2x00dev, libconf->basic_rates);
 573         if (flags & CONFIG_UPDATE_CHANNEL)
 574                 rt2500usb_config_channel(rt2x00dev, &libconf->rf,
 575                                          libconf->conf->power_level);
 576         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 577                 rt2500usb_config_txpower(rt2x00dev,
 578                                          libconf->conf->power_level);
 579         if (flags & CONFIG_UPDATE_ANTENNA)
 580                 rt2500usb_config_antenna(rt2x00dev, &libconf->ant);
 581         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 582                 rt2500usb_config_duration(rt2x00dev, libconf);
 583 }
 584
 585 /*
 586  * Link tuning
 587  */
 588 static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev,
 589                                  struct link_qual *qual)
 590 {
 591         u16 reg;
 592
 593         /*
 594          * Update FCS error count from register.
 595          */
 596         rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
 597         qual->rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
 598
 599         /*
 600          * Update False CCA count from register.
 601          */
 602         rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
 603         qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
 604 }
 605
 606 static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 607 {
 608         u16 eeprom;
 609         u16 value;
 610
 611         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
 612         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
 613         rt2500usb_bbp_write(rt2x00dev, 24, value);
 614
 615         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
 616         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
 617         rt2500usb_bbp_write(rt2x00dev, 25, value);
 618
 619         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
 620         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
 621         rt2500usb_bbp_write(rt2x00dev, 61, value);
 622
 623         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
 624         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
 625         rt2500usb_bbp_write(rt2x00dev, 17, value);
 626
 627         rt2x00dev->link.vgc_level = value;
 628 }
 629
 630 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 631 {
 632         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 633         u16 bbp_thresh;
 634         u16 vgc_bound;
 635         u16 sens;
 636         u16 r24;
 637         u16 r25;
 638         u16 r61;
 639         u16 r17_sens;
 640         u8 r17;
 641         u8 up_bound;
 642         u8 low_bound;
 643
 644         /*
 645          * Read current r17 value, as well as the sensitivity values
 646          * for the r17 register.
 647          */
 648         rt2500usb_bbp_read(rt2x00dev, 17, &r17);
 649         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
 650
 651         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
 652         up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
 653         low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER);
 654
 655         /*
 656          * If we are not associated, we should go straight to the
 657          * dynamic CCA tuning.
 658          */
 659         if (!rt2x00dev->intf_associated)
 660                 goto dynamic_cca_tune;
 661
 662         /*
 663          * Determine the BBP tuning threshold and correctly
 664          * set BBP 24, 25 and 61.
 665          */
 666         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
 667         bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
 668
 669         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
 670         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
 671         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
 672
 673         if ((rssi + bbp_thresh) > 0) {
 674                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
 675                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
 676                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
 677         } else {
 678                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
 679                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
 680                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
 681         }
 682
 683         rt2500usb_bbp_write(rt2x00dev, 24, r24);
 684         rt2500usb_bbp_write(rt2x00dev, 25, r25);
 685         rt2500usb_bbp_write(rt2x00dev, 61, r61);
 686
 687         /*
 688          * A too low RSSI will cause too much false CCA which will
 689          * then corrupt the R17 tuning. To remidy this the tuning should
 690          * be stopped (While making sure the R17 value will not exceed limits)
 691          */
 692         if (rssi >= -40) {
 693                 if (r17 != 0x60)
 694                         rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
 695                 return;
 696         }
 697
 698         /*
 699          * Special big-R17 for short distance
 700          */
 701         if (rssi >= -58) {
 702                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
 703                 if (r17 != sens)
 704                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 705                 return;
 706         }
 707
 708         /*
 709          * Special mid-R17 for middle distance
 710          */
 711         if (rssi >= -74) {
 712                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
 713                 if (r17 != sens)
 714                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 715                 return;
 716         }
 717
 718         /*
 719          * Leave short or middle distance condition, restore r17
 720          * to the dynamic tuning range.
 721          */
 722         low_bound = 0x32;
 723         if (rssi < -77)
 724                 up_bound -= (-77 - rssi);
 725
 726         if (up_bound < low_bound)
 727                 up_bound = low_bound;
 728
 729         if (r17 > up_bound) {
 730                 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
 731                 rt2x00dev->link.vgc_level = up_bound;
 732                 return;
 733         }
 734
 735 dynamic_cca_tune:
 736
 737         /*
 738          * R17 is inside the dynamic tuning range,
 739          * start tuning the link based on the false cca counter.
 740          */
 741         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
 742                 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
 743                 rt2x00dev->link.vgc_level = r17;
 744         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
 745                 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
 746                 rt2x00dev->link.vgc_level = r17;
 747         }
 748 }
 749
 750 /*
 751  * Initialization functions.
 752  */
 753 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 754 {
 755         u16 reg;
 756
 757         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
 758                                     USB_MODE_TEST, REGISTER_TIMEOUT);
 759         rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
 760                                     0x00f0, REGISTER_TIMEOUT);
 761
 762         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 763         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
 764         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 765
 766         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
 767         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
 768
 769         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 770         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
 771         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
 772         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 773         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 774
 775         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 776         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 777         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 778         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 779         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 780
 781         rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
 782         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
 783         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
 784         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
 785         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
 786         rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
 787
 788         rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
 789         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
 790         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
 791         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
 792         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
 793         rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
 794
 795         rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
 796         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
 797         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
 798         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
 799         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
 800         rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
 801
 802         rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
 803         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
 804         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
 805         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
 806         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
 807         rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 808
 809         rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
 810         rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
 811
 812         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 813                 return -EBUSY;
 814
 815         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 816         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 817         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 818         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 819         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 820
 821         if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
 822                 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 823                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
 824         } else {
 825                 reg = 0;
 826                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 1);
 827                 rt2x00_set_field16(&reg, PHY_CSR2_LNA_MODE, 3);
 828         }
 829         rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
 830
 831         rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
 832         rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
 833         rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
 834         rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
 835
 836         rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 837         rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
 838                            rt2x00dev->rx->data_size);
 839         rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
 840
 841         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 842         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 843         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
 844         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 845
 846         rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 847         rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
 848         rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 849
 850         rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
 851         rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
 852         rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
 853
 854         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 855         rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
 856         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 857
 858         return 0;
 859 }
 860
 861 static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
 862 {
 863         unsigned int i;
 864         u8 value;
 865
 866         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 867                 rt2500usb_bbp_read(rt2x00dev, 0, &value);
 868                 if ((value != 0xff) && (value != 0x00))
 869                         return 0;
 870                 udelay(REGISTER_BUSY_DELAY);
 871         }
 872
 873         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 874         return -EACCES;
 875 }
 876
 877 static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 878 {
 879         unsigned int i;
 880         u16 eeprom;
 881         u8 value;
 882         u8 reg_id;
 883
 884         if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev)))
 885                 return -EACCES;
 886
 887         rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
 888         rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
 889         rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
 890         rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
 891         rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
 892         rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
 893         rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
 894         rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
 895         rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
 896         rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
 897         rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
 898         rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
 899         rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
 900         rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
 901         rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
 902         rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
 903         rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
 904         rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
 905         rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
 906         rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
 907         rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
 908         rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
 909         rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
 910         rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
 911         rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
 912         rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
 913         rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
 914         rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
 915         rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
 916         rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
 917         rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
 918
 919         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 920                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 921
 922                 if (eeprom != 0xffff && eeprom != 0x0000) {
 923                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 924                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 925                         rt2500usb_bbp_write(rt2x00dev, reg_id, value);
 926                 }
 927         }
 928
 929         return 0;
 930 }
 931
 932 /*
 933  * Device state switch handlers.
 934  */
 935 static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 936                                 enum dev_state state)
 937 {
 938         u16 reg;
 939
 940         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 941         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
 942                            (state == STATE_RADIO_RX_OFF) ||
 943                            (state == STATE_RADIO_RX_OFF_LINK));
 944         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 945 }
 946
 947 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 948 {
 949         /*
 950          * Initialize all registers.
 951          */
 952         if (unlikely(rt2500usb_init_registers(rt2x00dev) ||
 953                      rt2500usb_init_bbp(rt2x00dev)))
 954                 return -EIO;
 955
 956         return 0;
 957 }
 958
 959 static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 960 {
 961         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
 962         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
 963
 964         /*
 965          * Disable synchronisation.
 966          */
 967         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
 968
 969         rt2x00usb_disable_radio(rt2x00dev);
 970 }
 971
 972 static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
 973                                enum dev_state state)
 974 {
 975         u16 reg;
 976         u16 reg2;
 977         unsigned int i;
 978         char put_to_sleep;
 979         char bbp_state;
 980         char rf_state;
 981
 982         put_to_sleep = (state != STATE_AWAKE);
 983
 984         reg = 0;
 985         rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
 986         rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
 987         rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
 988         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 989         rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
 990         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 991
 992         /*
 993          * Device is not guaranteed to be in the requested state yet.
 994          * We must wait until the register indicates that the
 995          * device has entered the correct state.
 996          */
 997         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 998                 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
 999                 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
1000                 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
1001                 if (bbp_state == state && rf_state == state)
1002                         return 0;
1003                 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1004                 msleep(30);
1005         }
1006
1007         return -EBUSY;
1008 }
1009
1010 static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1011                                       enum dev_state state)
1012 {
1013         int retval = 0;
1014
1015         switch (state) {
1016         case STATE_RADIO_ON:
1017                 retval = rt2500usb_enable_radio(rt2x00dev);
1018                 break;
1019         case STATE_RADIO_OFF:
1020                 rt2500usb_disable_radio(rt2x00dev);
1021                 break;
1022         case STATE_RADIO_RX_ON:
1023         case STATE_RADIO_RX_ON_LINK:
1024         case STATE_RADIO_RX_OFF:
1025         case STATE_RADIO_RX_OFF_LINK:
1026                 rt2500usb_toggle_rx(rt2x00dev, state);
1027                 break;
1028         case STATE_RADIO_IRQ_ON:
1029         case STATE_RADIO_IRQ_OFF:
1030                 /* No support, but no error either */
1031                 break;
1032         case STATE_DEEP_SLEEP:
1033         case STATE_SLEEP:
1034         case STATE_STANDBY:
1035         case STATE_AWAKE:
1036                 retval = rt2500usb_set_state(rt2x00dev, state);
1037                 break;
1038         default:
1039                 retval = -ENOTSUPP;
1040                 break;
1041         }
1042
1043         if (unlikely(retval))
1044                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1045                       state, retval);
1046
1047         return retval;
1048 }
1049
1050 /*
1051  * TX descriptor initialization
1052  */
1053 static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1054                                     struct sk_buff *skb,
1055                                     struct txentry_desc *txdesc)
1056 {
1057         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1058         __le32 *txd = skbdesc->desc;
1059         u32 word;
1060
1061         /*
1062          * Start writing the descriptor words.
1063          */
1064         rt2x00_desc_read(txd, 1, &word);
1065         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1066         rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
1067         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1068         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1069         rt2x00_desc_write(txd, 1, word);
1070
1071         rt2x00_desc_read(txd, 2, &word);
1072         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1073         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1074         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1075         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1076         rt2x00_desc_write(txd, 2, word);
1077
1078         rt2x00_desc_read(txd, 0, &word);
1079         rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
1080         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1081                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1082         rt2x00_set_field32(&word, TXD_W0_ACK,
1083                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1084         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1085                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1086         rt2x00_set_field32(&word, TXD_W0_OFDM,
1087                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1088         rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1089                            test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
1090         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1091         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
1092                            skb->len - skbdesc->desc_len);
1093         rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
1094         rt2x00_desc_write(txd, 0, word);
1095 }
1096
1097 static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
1098                                      struct sk_buff *skb)
1099 {
1100         int length;
1101
1102         /*
1103          * The length _must_ be a multiple of 2,
1104          * but it must _not_ be a multiple of the USB packet size.
1105          */
1106         length = roundup(skb->len, 2);
1107         length += (2 * !(length % rt2x00dev->usb_maxpacket));
1108
1109         return length;
1110 }
1111
1112 /*
1113  * TX data initialization
1114  */
1115 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1116                                     const enum data_queue_qid queue)
1117 {
1118         u16 reg;
1119
1120         if (queue != QID_BEACON) {
1121                 rt2x00usb_kick_tx_queue(rt2x00dev, queue);
1122                 return;
1123         }
1124
1125         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1126         if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1127                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
1128                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
1129                 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1130                 /*
1131                  * Beacon generation will fail initially.
1132                  * To prevent this we need to register the TXRX_CSR19
1133                  * register several times.
1134                  */
1135                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1136                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1137                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1138                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1139                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1140         }
1141 }
1142
1143 /*
1144  * RX control handlers
1145  */
1146 static void rt2500usb_fill_rxdone(struct queue_entry *entry,
1147                                   struct rxdone_entry_desc *rxdesc)
1148 {
1149         struct queue_entry_priv_usb *entry_priv = entry->priv_data;
1150         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1151         __le32 *rxd =
1152             (__le32 *)(entry->skb->data +
1153                        (entry_priv->urb->actual_length -
1154                         entry->queue->desc_size));
1155         u32 word0;
1156         u32 word1;
1157
1158         /*
1159          * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1160          * frame data in rt2x00usb.
1161          */
1162         memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
1163         rxd = (__le32 *)skbdesc->desc;
1164
1165         /*
1166          * It is now safe to read the descriptor on all architectures.
1167          */
1168         rt2x00_desc_read(rxd, 0, &word0);
1169         rt2x00_desc_read(rxd, 1, &word1);
1170
1171         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1172                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1173         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1174                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1175
1176         /*
1177          * Obtain the status about this packet.
1178          * When frame was received with an OFDM bitrate,
1179          * the signal is the PLCP value. If it was received with
1180          * a CCK bitrate the signal is the rate in 100kbit/s.
1181          */
1182         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1183         rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
1184             entry->queue->rt2x00dev->rssi_offset;
1185         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1186
1187         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1188                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1189         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1190                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1191
1192         /*
1193          * Adjust the skb memory window to the frame boundaries.
1194          */
1195         skb_trim(entry->skb, rxdesc->size);
1196 }
1197
1198 /*
1199  * Interrupt functions.
1200  */
1201 static void rt2500usb_beacondone(struct urb *urb)
1202 {
1203         struct queue_entry *entry = (struct queue_entry *)urb->context;
1204         struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
1205
1206         if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
1207                 return;
1208
1209         /*
1210          * Check if this was the guardian beacon,
1211          * if that was the case we need to send the real beacon now.
1212          * Otherwise we should free the sk_buffer, the device
1213          * should be doing the rest of the work now.
1214          */
1215         if (bcn_priv->guardian_urb == urb) {
1216                 usb_submit_urb(bcn_priv->urb, GFP_ATOMIC);
1217         } else if (bcn_priv->urb == urb) {
1218                 dev_kfree_skb(entry->skb);
1219                 entry->skb = NULL;
1220         }
1221 }
1222
1223 /*
1224  * Device probe functions.
1225  */
1226 static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1227 {
1228         u16 word;
1229         u8 *mac;
1230         u8 bbp;
1231
1232         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1233
1234         /*
1235          * Start validation of the data that has been read.
1236          */
1237         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1238         if (!is_valid_ether_addr(mac)) {
1239                 DECLARE_MAC_BUF(macbuf);
1240
1241                 random_ether_addr(mac);
1242                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1243         }
1244
1245         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1246         if (word == 0xffff) {
1247                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1248                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1249                                    ANTENNA_SW_DIVERSITY);
1250                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1251                                    ANTENNA_SW_DIVERSITY);
1252                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1253                                    LED_MODE_DEFAULT);
1254                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1255                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1256                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1257                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1258                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1259         }
1260
1261         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1262         if (word == 0xffff) {
1263                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1264                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1265                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1266                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1267                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1268         }
1269
1270         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1271         if (word == 0xffff) {
1272                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1273                                    DEFAULT_RSSI_OFFSET);
1274                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1275                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1276         }
1277
1278         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1279         if (word == 0xffff) {
1280                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1281                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1282                 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1283         }
1284
1285         /*
1286          * Switch lower vgc bound to current BBP R17 value,
1287          * lower the value a bit for better quality.
1288          */
1289         rt2500usb_bbp_read(rt2x00dev, 17, &bbp);
1290         bbp -= 6;
1291
1292         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1293         if (word == 0xffff) {
1294                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1295                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1296                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1297                 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1298         }
1299
1300         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1301         if (word == 0xffff) {
1302                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1303                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1304                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1305                 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1306         } else {
1307                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1308                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1309         }
1310
1311         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1312         if (word == 0xffff) {
1313                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1314                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1315                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1316                 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1317         }
1318
1319         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1320         if (word == 0xffff) {
1321                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1322                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1323                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1324                 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1325         }
1326
1327         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1328         if (word == 0xffff) {
1329                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1330                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1331                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1332                 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1333         }
1334
1335         return 0;
1336 }
1337
1338 static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1339 {
1340         u16 reg;
1341         u16 value;
1342         u16 eeprom;
1343
1344         /*
1345          * Read EEPROM word for configuration.
1346          */
1347         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1348
1349         /*
1350          * Identify RF chipset.
1351          */
1352         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1353         rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1354         rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1355
1356         if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
1357                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1358                 return -ENODEV;
1359         }
1360
1361         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1362             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1363             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1364             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1365             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1366             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1367                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1368                 return -ENODEV;
1369         }
1370
1371         /*
1372          * Identify default antenna configuration.
1373          */
1374         rt2x00dev->default_ant.tx =
1375             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1376         rt2x00dev->default_ant.rx =
1377             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1378
1379         /*
1380          * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
1381          * I am not 100% sure about this, but the legacy drivers do not
1382          * indicate antenna swapping in software is required when
1383          * diversity is enabled.
1384          */
1385         if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
1386                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
1387         if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
1388                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
1389
1390         /*
1391          * Store led mode, for correct led behaviour.
1392          */
1393 #ifdef CONFIG_RT2500USB_LEDS
1394         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1395
1396         rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1397         if (value == LED_MODE_TXRX_ACTIVITY)
1398                 rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
1399                                    LED_TYPE_ACTIVITY);
1400 #endif /* CONFIG_RT2500USB_LEDS */
1401
1402         /*
1403          * Check if the BBP tuning should be disabled.
1404          */
1405         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1406         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1407                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1408
1409         /*
1410          * Read the RSSI <-> dBm offset information.
1411          */
1412         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1413         rt2x00dev->rssi_offset =
1414             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1415
1416         return 0;
1417 }
1418
1419 /*
1420  * RF value list for RF2522
1421  * Supports: 2.4 GHz
1422  */
1423 static const struct rf_channel rf_vals_bg_2522[] = {
1424         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1425         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1426         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1427         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1428         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1429         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1430         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1431         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1432         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1433         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1434         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1435         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1436         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1437         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1438 };
1439
1440 /*
1441  * RF value list for RF2523
1442  * Supports: 2.4 GHz
1443  */
1444 static const struct rf_channel rf_vals_bg_2523[] = {
1445         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1446         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1447         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1448         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1449         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1450         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1451         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1452         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1453         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1454         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1455         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1456         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1457         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1458         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1459 };
1460
1461 /*
1462  * RF value list for RF2524
1463  * Supports: 2.4 GHz
1464  */
1465 static const struct rf_channel rf_vals_bg_2524[] = {
1466         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1467         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1468         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1469         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1470         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1471         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1472         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1473         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1474         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1475         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1476         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1477         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1478         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1479         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1480 };
1481
1482 /*
1483  * RF value list for RF2525
1484  * Supports: 2.4 GHz
1485  */
1486 static const struct rf_channel rf_vals_bg_2525[] = {
1487         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1488         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1489         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1490         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1491         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1492         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1493         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1494         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1495         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1496         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1497         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1498         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1499         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1500         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1501 };
1502
1503 /*
1504  * RF value list for RF2525e
1505  * Supports: 2.4 GHz
1506  */
1507 static const struct rf_channel rf_vals_bg_2525e[] = {
1508         { 1,  0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1509         { 2,  0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1510         { 3,  0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1511         { 4,  0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1512         { 5,  0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1513         { 6,  0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1514         { 7,  0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1515         { 8,  0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1516         { 9,  0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1517         { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1518         { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1519         { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1520         { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1521         { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1522 };
1523
1524 /*
1525  * RF value list for RF5222
1526  * Supports: 2.4 GHz & 5.2 GHz
1527  */
1528 static const struct rf_channel rf_vals_5222[] = {
1529         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1530         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1531         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1532         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1533         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1534         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1535         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1536         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1537         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1538         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1539         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1540         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1541         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1542         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1543
1544         /* 802.11 UNI / HyperLan 2 */
1545         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1546         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1547         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1548         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1549         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1550         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1551         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1552         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1553
1554         /* 802.11 HyperLan 2 */
1555         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1556         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1557         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1558         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1559         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1560         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1561         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1562         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1563         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1564         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1565
1566         /* 802.11 UNII */
1567         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1568         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1569         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1570         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1571         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1572 };
1573
1574 static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1575 {
1576         struct hw_mode_spec *spec = &rt2x00dev->spec;
1577         u8 *txpower;
1578         unsigned int i;
1579
1580         /*
1581          * Initialize all hw fields.
1582          */
1583         rt2x00dev->hw->flags =
1584             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1585             IEEE80211_HW_RX_INCLUDES_FCS |
1586             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1587             IEEE80211_HW_SIGNAL_DBM;
1588
1589         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1590
1591         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1592         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1593                                 rt2x00_eeprom_addr(rt2x00dev,
1594                                                    EEPROM_MAC_ADDR_0));
1595
1596         /*
1597          * Convert tx_power array in eeprom.
1598          */
1599         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1600         for (i = 0; i < 14; i++)
1601                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1602
1603         /*
1604          * Initialize hw_mode information.
1605          */
1606         spec->supported_bands = SUPPORT_BAND_2GHZ;
1607         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1608         spec->tx_power_a = NULL;
1609         spec->tx_power_bg = txpower;
1610         spec->tx_power_default = DEFAULT_TXPOWER;
1611
1612         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1613                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1614                 spec->channels = rf_vals_bg_2522;
1615         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1616                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1617                 spec->channels = rf_vals_bg_2523;
1618         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1619                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1620                 spec->channels = rf_vals_bg_2524;
1621         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1622                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1623                 spec->channels = rf_vals_bg_2525;
1624         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1625                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1626                 spec->channels = rf_vals_bg_2525e;
1627         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1628                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1629                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1630                 spec->channels = rf_vals_5222;
1631         }
1632 }
1633
1634 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1635 {
1636         int retval;
1637
1638         /*
1639          * Allocate eeprom data.
1640          */
1641         retval = rt2500usb_validate_eeprom(rt2x00dev);
1642         if (retval)
1643                 return retval;
1644
1645         retval = rt2500usb_init_eeprom(rt2x00dev);
1646         if (retval)
1647                 return retval;
1648
1649         /*
1650          * Initialize hw specifications.
1651          */
1652         rt2500usb_probe_hw_mode(rt2x00dev);
1653
1654         /*
1655          * This device requires the atim queue
1656          */
1657         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1658         __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
1659         __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
1660
1661         /*
1662          * Set the rssi offset.
1663          */
1664         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1665
1666         return 0;
1667 }
1668
1669 /*
1670  * IEEE80211 stack callback functions.
1671  */
1672 static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
1673 {
1674         struct rt2x00_dev *rt2x00dev = hw->priv;
1675         struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
1676         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
1677         struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
1678         struct queue_entry_priv_usb_bcn *bcn_priv;
1679         struct skb_frame_desc *skbdesc;
1680         struct txentry_desc txdesc;
1681         int pipe = usb_sndbulkpipe(usb_dev, 1);
1682         int length;
1683         u16 reg;
1684
1685         if (unlikely(!intf->beacon))
1686                 return -ENOBUFS;
1687
1688         bcn_priv = intf->beacon->priv_data;
1689
1690         /*
1691          * Copy all TX descriptor information into txdesc,
1692          * after that we are free to use the skb->cb array
1693          * for our information.
1694          */
1695         intf->beacon->skb = skb;
1696         rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
1697
1698         /*
1699          * Add the descriptor in front of the skb.
1700          */
1701         skb_push(skb, intf->beacon->queue->desc_size);
1702         memset(skb->data, 0, intf->beacon->queue->desc_size);
1703
1704         /*
1705          * Fill in skb descriptor
1706          */
1707         skbdesc = get_skb_frame_desc(skb);
1708         memset(skbdesc, 0, sizeof(*skbdesc));
1709         skbdesc->desc = skb->data;
1710         skbdesc->desc_len = intf->beacon->queue->desc_size;
1711         skbdesc->entry = intf->beacon;
1712
1713         /*
1714          * Disable beaconing while we are reloading the beacon data,
1715          * otherwise we might be sending out invalid data.
1716          */
1717         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1718         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
1719         rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
1720         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
1721         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1722
1723         rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
1724
1725         /*
1726          * USB devices cannot blindly pass the skb->len as the
1727          * length of the data to usb_fill_bulk_urb. Pass the skb
1728          * to the driver to determine what the length should be.
1729          */
1730         length = rt2500usb_get_tx_data_len(rt2x00dev, skb);
1731
1732         usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
1733                           skb->data, length, rt2500usb_beacondone,
1734                           intf->beacon);
1735
1736         /*
1737          * Second we need to create the guardian byte.
1738          * We only need a single byte, so lets recycle
1739          * the 'flags' field we are not using for beacons.
1740          */
1741         bcn_priv->guardian_data = 0;
1742         usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
1743                           &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
1744                           intf->beacon);
1745
1746         /*
1747          * Send out the guardian byte.
1748          */
1749         usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
1750
1751         /*
1752          * Enable beacon generation.
1753          */
1754         rt2500usb_kick_tx_queue(rt2x00dev, QID_BEACON);
1755
1756         return 0;
1757 }
1758
1759 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1760         .tx                     = rt2x00mac_tx,
1761         .start                  = rt2x00mac_start,
1762         .stop                   = rt2x00mac_stop,
1763         .add_interface          = rt2x00mac_add_interface,
1764         .remove_interface       = rt2x00mac_remove_interface,
1765         .config                 = rt2x00mac_config,
1766         .config_interface       = rt2x00mac_config_interface,
1767         .configure_filter       = rt2x00mac_configure_filter,
1768         .get_stats              = rt2x00mac_get_stats,
1769         .bss_info_changed       = rt2x00mac_bss_info_changed,
1770         .conf_tx                = rt2x00mac_conf_tx,
1771         .get_tx_stats           = rt2x00mac_get_tx_stats,
1772         .beacon_update          = rt2500usb_beacon_update,
1773 };
1774
1775 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1776         .probe_hw               = rt2500usb_probe_hw,
1777         .initialize             = rt2x00usb_initialize,
1778         .uninitialize           = rt2x00usb_uninitialize,
1779         .init_rxentry           = rt2x00usb_init_rxentry,
1780         .init_txentry           = rt2x00usb_init_txentry,
1781         .set_device_state       = rt2500usb_set_device_state,
1782         .link_stats             = rt2500usb_link_stats,
1783         .reset_tuner            = rt2500usb_reset_tuner,
1784         .link_tuner             = rt2500usb_link_tuner,
1785         .write_tx_desc          = rt2500usb_write_tx_desc,
1786         .write_tx_data          = rt2x00usb_write_tx_data,
1787         .get_tx_data_len        = rt2500usb_get_tx_data_len,
1788         .kick_tx_queue          = rt2500usb_kick_tx_queue,
1789         .fill_rxdone            = rt2500usb_fill_rxdone,
1790         .config_filter          = rt2500usb_config_filter,
1791         .config_intf            = rt2500usb_config_intf,
1792         .config_erp             = rt2500usb_config_erp,
1793         .config                 = rt2500usb_config,
1794 };
1795
1796 static const struct data_queue_desc rt2500usb_queue_rx = {
1797         .entry_num              = RX_ENTRIES,
1798         .data_size              = DATA_FRAME_SIZE,
1799         .desc_size              = RXD_DESC_SIZE,
1800         .priv_size              = sizeof(struct queue_entry_priv_usb),
1801 };
1802
1803 static const struct data_queue_desc rt2500usb_queue_tx = {
1804         .entry_num              = TX_ENTRIES,
1805         .data_size              = DATA_FRAME_SIZE,
1806         .desc_size              = TXD_DESC_SIZE,
1807         .priv_size              = sizeof(struct queue_entry_priv_usb),
1808 };
1809
1810 static const struct data_queue_desc rt2500usb_queue_bcn = {
1811         .entry_num              = BEACON_ENTRIES,
1812         .data_size              = MGMT_FRAME_SIZE,
1813         .desc_size              = TXD_DESC_SIZE,
1814         .priv_size              = sizeof(struct queue_entry_priv_usb_bcn),
1815 };
1816
1817 static const struct data_queue_desc rt2500usb_queue_atim = {
1818         .entry_num              = ATIM_ENTRIES,
1819         .data_size              = DATA_FRAME_SIZE,
1820         .desc_size              = TXD_DESC_SIZE,
1821         .priv_size              = sizeof(struct queue_entry_priv_usb),
1822 };
1823
1824 static const struct rt2x00_ops rt2500usb_ops = {
1825         .name           = KBUILD_MODNAME,
1826         .max_sta_intf   = 1,
1827         .max_ap_intf    = 1,
1828         .eeprom_size    = EEPROM_SIZE,
1829         .rf_size        = RF_SIZE,
1830         .tx_queues      = NUM_TX_QUEUES,
1831         .rx             = &rt2500usb_queue_rx,
1832         .tx             = &rt2500usb_queue_tx,
1833         .bcn            = &rt2500usb_queue_bcn,
1834         .atim           = &rt2500usb_queue_atim,
1835         .lib            = &rt2500usb_rt2x00_ops,
1836         .hw             = &rt2500usb_mac80211_ops,
1837 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1838         .debugfs        = &rt2500usb_rt2x00debug,
1839 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1840 };
1841
1842 /*
1843  * rt2500usb module information.
1844  */
1845 static struct usb_device_id rt2500usb_device_table[] = {
1846         /* ASUS */
1847         { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1848         { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1849         /* Belkin */
1850         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1851         { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1852         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1853         /* Cisco Systems */
1854         { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1855         { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1856         { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1857         /* Conceptronic */
1858         { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1859         /* D-LINK */
1860         { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1861         /* Gigabyte */
1862         { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1863         { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1864         /* Hercules */
1865         { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1866         /* Melco */
1867         { USB_DEVICE(0x0411, 0x005e), USB_DEVICE_DATA(&rt2500usb_ops) },
1868         { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1869         { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1870         { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1871         { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1872         /* MSI */
1873         { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1874         { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1875         { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1876         /* Ralink */
1877         { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1878         { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1879         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1880         { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1881         /* Siemens */
1882         { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1883         /* SMC */
1884         { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1885         /* Spairon */
1886         { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1887         /* Trust */
1888         { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1889         /* Zinwell */
1890         { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1891         { 0, }
1892 };
1893
1894 MODULE_AUTHOR(DRV_PROJECT);
1895 MODULE_VERSION(DRV_VERSION);
1896 MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1897 MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1898 MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1899 MODULE_LICENSE("GPL");
1900
1901 static struct usb_driver rt2500usb_driver = {
1902         .name           = KBUILD_MODNAME,
1903         .id_table       = rt2500usb_device_table,
1904         .probe          = rt2x00usb_probe,
1905         .disconnect     = rt2x00usb_disconnect,
1906         .suspend        = rt2x00usb_suspend,
1907         .resume         = rt2x00usb_resume,
1908 };
1909
1910 static int __init rt2500usb_init(void)
1911 {
1912         return usb_register(&rt2500usb_driver);
1913 }
1914
1915 static void __exit rt2500usb_exit(void)
1916 {
1917         usb_deregister(&rt2500usb_driver);
1918 }
1919
1920 module_init(rt2500usb_init);
1921 module_exit(rt2500usb_exit);