SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500usb.c

   1 /*
   2         Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500usb
  23         Abstract: rt2500usb device specific routines.
  24         Supported chipsets: RT2570.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/usb.h>
  33
  34 #include "rt2x00.h"
  35 #include "rt2x00usb.h"
  36 #include "rt2500usb.h"
  37
  38 /*
  39  * Allow hardware encryption to be disabled.
  40  */
  41 static int modparam_nohwcrypt = 0;
  42 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  43 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  44
  45 /*
  46  * Register access.
  47  * All access to the CSR registers will go through the methods
  48  * rt2500usb_register_read and rt2500usb_register_write.
  49  * BBP and RF register require indirect register access,
  50  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  51  * These indirect registers work with busy bits,
  52  * and we will try maximal REGISTER_BUSY_COUNT times to access
  53  * the register while taking a REGISTER_BUSY_DELAY us delay
  54  * between each attampt. When the busy bit is still set at that time,
  55  * the access attempt is considered to have failed,
  56  * and we will print an error.
  57  * If the csr_mutex is already held then the _lock variants must
  58  * be used instead.
  59  */
  60 static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
  61                                            const unsigned int offset,
  62                                            u16 *value)
  63 {
  64         __le16 reg;
  65         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  66                                       USB_VENDOR_REQUEST_IN, offset,
  67                                       &reg, sizeof(reg), REGISTER_TIMEOUT);
  68         *value = le16_to_cpu(reg);
  69 }
  70
  71 static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
  72                                                 const unsigned int offset,
  73                                                 u16 *value)
  74 {
  75         __le16 reg;
  76         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
  77                                        USB_VENDOR_REQUEST_IN, offset,
  78                                        &reg, sizeof(reg), REGISTER_TIMEOUT);
  79         *value = le16_to_cpu(reg);
  80 }
  81
  82 static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
  83                                                 const unsigned int offset,
  84                                                 void *value, const u16 length)
  85 {
  86         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  87                                       USB_VENDOR_REQUEST_IN, offset,
  88                                       value, length,
  89                                       REGISTER_TIMEOUT16(length));
  90 }
  91
  92 static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
  93                                             const unsigned int offset,
  94                                             u16 value)
  95 {
  96         __le16 reg = cpu_to_le16(value);
  97         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  98                                       USB_VENDOR_REQUEST_OUT, offset,
  99                                       &reg, sizeof(reg), REGISTER_TIMEOUT);
 100 }
 101
 102 static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
 103                                                  const unsigned int offset,
 104                                                  u16 value)
 105 {
 106         __le16 reg = cpu_to_le16(value);
 107         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 108                                        USB_VENDOR_REQUEST_OUT, offset,
 109                                        &reg, sizeof(reg), REGISTER_TIMEOUT);
 110 }
 111
 112 static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 113                                                  const unsigned int offset,
 114                                                  void *value, const u16 length)
 115 {
 116         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 117                                       USB_VENDOR_REQUEST_OUT, offset,
 118                                       value, length,
 119                                       REGISTER_TIMEOUT16(length));
 120 }
 121
 122 static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 123                                   const unsigned int offset,
 124                                   struct rt2x00_field16 field,
 125                                   u16 *reg)
 126 {
 127         unsigned int i;
 128
 129         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 130                 rt2500usb_register_read_lock(rt2x00dev, offset, reg);
 131                 if (!rt2x00_get_field16(*reg, field))
 132                         return 1;
 133                 udelay(REGISTER_BUSY_DELAY);
 134         }
 135
 136         ERROR(rt2x00dev, "Indirect register access failed: "
 137               "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
 138         *reg = ~0;
 139
 140         return 0;
 141 }
 142
 143 #define WAIT_FOR_BBP(__dev, __reg) \
 144         rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg))
 145 #define WAIT_FOR_RF(__dev, __reg) \
 146         rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg))
 147
 148 static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 149                                 const unsigned int word, const u8 value)
 150 {
 151         u16 reg;
 152
 153         mutex_lock(&rt2x00dev->csr_mutex);
 154
 155         /*
 156          * Wait until the BBP becomes available, afterwards we
 157          * can safely write the new data into the register.
 158          */
 159         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 160                 reg = 0;
 161                 rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
 162                 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 163                 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
 164
 165                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 166         }
 167
 168         mutex_unlock(&rt2x00dev->csr_mutex);
 169 }
 170
 171 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 172                                const unsigned int word, u8 *value)
 173 {
 174         u16 reg;
 175
 176         mutex_lock(&rt2x00dev->csr_mutex);
 177
 178         /*
 179          * Wait until the BBP becomes available, afterwards we
 180          * can safely write the read request into the register.
 181          * After the data has been written, we wait until hardware
 182          * returns the correct value, if at any time the register
 183          * doesn't become available in time, reg will be 0xffffffff
 184          * which means we return 0xff to the caller.
 185          */
 186         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 187                 reg = 0;
 188                 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 189                 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
 190
 191                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 192
 193                 if (WAIT_FOR_BBP(rt2x00dev, &reg))
 194                         rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
 195         }
 196
 197         *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 198
 199         mutex_unlock(&rt2x00dev->csr_mutex);
 200 }
 201
 202 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
 203                                const unsigned int word, const u32 value)
 204 {
 205         u16 reg;
 206
 207         mutex_lock(&rt2x00dev->csr_mutex);
 208
 209         /*
 210          * Wait until the RF becomes available, afterwards we
 211          * can safely write the new data into the register.
 212          */
 213         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 214                 reg = 0;
 215                 rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
 216                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
 217
 218                 reg = 0;
 219                 rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
 220                 rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
 221                 rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
 222                 rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
 223
 224                 rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
 225                 rt2x00_rf_write(rt2x00dev, word, value);
 226         }
 227
 228         mutex_unlock(&rt2x00dev->csr_mutex);
 229 }
 230
 231 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 232 static void _rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
 233                                      const unsigned int offset,
 234                                      u32 *value)
 235 {
 236         rt2500usb_register_read(rt2x00dev, offset, (u16 *)value);
 237 }
 238
 239 static void _rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
 240                                       const unsigned int offset,
 241                                       u32 value)
 242 {
 243         rt2500usb_register_write(rt2x00dev, offset, value);
 244 }
 245
 246 static const struct rt2x00debug rt2500usb_rt2x00debug = {
 247         .owner  = THIS_MODULE,
 248         .csr    = {
 249                 .read           = _rt2500usb_register_read,
 250                 .write          = _rt2500usb_register_write,
 251                 .flags          = RT2X00DEBUGFS_OFFSET,
 252                 .word_base      = CSR_REG_BASE,
 253                 .word_size      = sizeof(u16),
 254                 .word_count     = CSR_REG_SIZE / sizeof(u16),
 255         },
 256         .eeprom = {
 257                 .read           = rt2x00_eeprom_read,
 258                 .write          = rt2x00_eeprom_write,
 259                 .word_base      = EEPROM_BASE,
 260                 .word_size      = sizeof(u16),
 261                 .word_count     = EEPROM_SIZE / sizeof(u16),
 262         },
 263         .bbp    = {
 264                 .read           = rt2500usb_bbp_read,
 265                 .write          = rt2500usb_bbp_write,
 266                 .word_base      = BBP_BASE,
 267                 .word_size      = sizeof(u8),
 268                 .word_count     = BBP_SIZE / sizeof(u8),
 269         },
 270         .rf     = {
 271                 .read           = rt2x00_rf_read,
 272                 .write          = rt2500usb_rf_write,
 273                 .word_base      = RF_BASE,
 274                 .word_size      = sizeof(u32),
 275                 .word_count     = RF_SIZE / sizeof(u32),
 276         },
 277 };
 278 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 279
 280 static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 281 {
 282         u16 reg;
 283
 284         rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
 285         return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
 286 }
 287
 288 #ifdef CONFIG_RT2X00_LIB_LEDS
 289 static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
 290                                      enum led_brightness brightness)
 291 {
 292         struct rt2x00_led *led =
 293             container_of(led_cdev, struct rt2x00_led, led_dev);
 294         unsigned int enabled = brightness != LED_OFF;
 295         u16 reg;
 296
 297         rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, &reg);
 298
 299         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 300                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, enabled);
 301         else if (led->type == LED_TYPE_ACTIVITY)
 302                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, enabled);
 303
 304         rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg);
 305 }
 306
 307 static int rt2500usb_blink_set(struct led_classdev *led_cdev,
 308                                unsigned long *delay_on,
 309                                unsigned long *delay_off)
 310 {
 311         struct rt2x00_led *led =
 312             container_of(led_cdev, struct rt2x00_led, led_dev);
 313         u16 reg;
 314
 315         rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, &reg);
 316         rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, *delay_on);
 317         rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, *delay_off);
 318         rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg);
 319
 320         return 0;
 321 }
 322
 323 static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
 324                                struct rt2x00_led *led,
 325                                enum led_type type)
 326 {
 327         led->rt2x00dev = rt2x00dev;
 328         led->type = type;
 329         led->led_dev.brightness_set = rt2500usb_brightness_set;
 330         led->led_dev.blink_set = rt2500usb_blink_set;
 331         led->flags = LED_INITIALIZED;
 332 }
 333 #endif /* CONFIG_RT2X00_LIB_LEDS */
 334
 335 /*
 336  * Configuration handlers.
 337  */
 338
 339 /*
 340  * rt2500usb does not differentiate between shared and pairwise
 341  * keys, so we should use the same function for both key types.
 342  */
 343 static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 344                                 struct rt2x00lib_crypto *crypto,
 345                                 struct ieee80211_key_conf *key)
 346 {
 347         int timeout;
 348         u32 mask;
 349         u16 reg;
 350
 351         if (crypto->cmd == SET_KEY) {
 352                 /*
 353                  * Pairwise key will always be entry 0, but this
 354                  * could collide with a shared key on the same
 355                  * position...
 356                  */
 357                 mask = TXRX_CSR0_KEY_ID.bit_mask;
 358
 359                 rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 360                 reg &= mask;
 361
 362                 if (reg && reg == mask)
 363                         return -ENOSPC;
 364
 365                 reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
 366
 367                 key->hw_key_idx += reg ? ffz(reg) : 0;
 368
 369                 /*
 370                  * The encryption key doesn't fit within the CSR cache,
 371                  * this means we should allocate it seperately and use
 372                  * rt2x00usb_vendor_request() to send the key to the hardware.
 373                  */
 374                 reg = KEY_ENTRY(key->hw_key_idx);
 375                 timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
 376                 rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
 377                                                     USB_VENDOR_REQUEST_OUT, reg,
 378                                                     crypto->key,
 379                                                     sizeof(crypto->key),
 380                                                     timeout);
 381
 382                 /*
 383                  * The driver does not support the IV/EIV generation
 384                  * in hardware. However it demands the data to be provided
 385                  * both seperately as well as inside the frame.
 386                  * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 387                  * to ensure rt2x00lib will not strip the data from the
 388                  * frame after the copy, now we must tell mac80211
 389                  * to generate the IV/EIV data.
 390                  */
 391                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 392                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
 393         }
 394
 395         /*
 396          * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate
 397          * a particular key is valid.
 398          */
 399         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 400         rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, crypto->cipher);
 401         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 402
 403         mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
 404         if (crypto->cmd == SET_KEY)
 405                 mask |= 1 << key->hw_key_idx;
 406         else if (crypto->cmd == DISABLE_KEY)
 407                 mask &= ~(1 << key->hw_key_idx);
 408         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, mask);
 409         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 410
 411         return 0;
 412 }
 413
 414 static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
 415                                     const unsigned int filter_flags)
 416 {
 417         u16 reg;
 418
 419         /*
 420          * Start configuration steps.
 421          * Note that the version error will always be dropped
 422          * and broadcast frames will always be accepted since
 423          * there is no filter for it at this time.
 424          */
 425         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 426         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC,
 427                            !(filter_flags & FIF_FCSFAIL));
 428         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL,
 429                            !(filter_flags & FIF_PLCPFAIL));
 430         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
 431                            !(filter_flags & FIF_CONTROL));
 432         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME,
 433                            !(filter_flags & FIF_PROMISC_IN_BSS));
 434         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
 435                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 436                            !rt2x00dev->intf_ap_count);
 437         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
 438         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
 439                            !(filter_flags & FIF_ALLMULTI));
 440         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, 0);
 441         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 442 }
 443
 444 static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
 445                                   struct rt2x00_intf *intf,
 446                                   struct rt2x00intf_conf *conf,
 447                                   const unsigned int flags)
 448 {
 449         unsigned int bcn_preload;
 450         u16 reg;
 451
 452         if (flags & CONFIG_UPDATE_TYPE) {
 453                 /*
 454                  * Enable beacon config
 455                  */
 456                 bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
 457                 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
 458                 rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
 459                 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
 460                                    2 * (conf->type != NL80211_IFTYPE_STATION));
 461                 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
 462
 463                 /*
 464                  * Enable synchronisation.
 465                  */
 466                 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 467                 rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
 468                 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 469
 470                 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 471                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
 472                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, conf->sync);
 473                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
 474                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 475         }
 476
 477         if (flags & CONFIG_UPDATE_MAC)
 478                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac,
 479                                               (3 * sizeof(__le16)));
 480
 481         if (flags & CONFIG_UPDATE_BSSID)
 482                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid,
 483                                               (3 * sizeof(__le16)));
 484 }
 485
 486 static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 487                                  struct rt2x00lib_erp *erp)
 488 {
 489         u16 reg;
 490
 491         rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
 492         rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
 493                            !!erp->short_preamble);
 494         rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
 495
 496         rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates);
 497
 498         rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 499         rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL, erp->beacon_int * 4);
 500         rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 501
 502         rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time);
 503         rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs);
 504         rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs);
 505 }
 506
 507 static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
 508                                  struct antenna_setup *ant)
 509 {
 510         u8 r2;
 511         u8 r14;
 512         u16 csr5;
 513         u16 csr6;
 514
 515         /*
 516          * We should never come here because rt2x00lib is supposed
 517          * to catch this and send us the correct antenna explicitely.
 518          */
 519         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 520                ant->tx == ANTENNA_SW_DIVERSITY);
 521
 522         rt2500usb_bbp_read(rt2x00dev, 2, &r2);
 523         rt2500usb_bbp_read(rt2x00dev, 14, &r14);
 524         rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
 525         rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
 526
 527         /*
 528          * Configure the TX antenna.
 529          */
 530         switch (ant->tx) {
 531         case ANTENNA_HW_DIVERSITY:
 532                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
 533                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
 534                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
 535                 break;
 536         case ANTENNA_A:
 537                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 538                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
 539                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
 540                 break;
 541         case ANTENNA_B:
 542         default:
 543                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 544                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
 545                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
 546                 break;
 547         }
 548
 549         /*
 550          * Configure the RX antenna.
 551          */
 552         switch (ant->rx) {
 553         case ANTENNA_HW_DIVERSITY:
 554                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
 555                 break;
 556         case ANTENNA_A:
 557                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 558                 break;
 559         case ANTENNA_B:
 560         default:
 561                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 562                 break;
 563         }
 564
 565         /*
 566          * RT2525E and RT5222 need to flip TX I/Q
 567          */
 568         if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
 569                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 570                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
 571                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
 572
 573                 /*
 574                  * RT2525E does not need RX I/Q Flip.
 575                  */
 576                 if (rt2x00_rf(rt2x00dev, RF2525E))
 577                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 578         } else {
 579                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
 580                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
 581         }
 582
 583         rt2500usb_bbp_write(rt2x00dev, 2, r2);
 584         rt2500usb_bbp_write(rt2x00dev, 14, r14);
 585         rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
 586         rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
 587 }
 588
 589 static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
 590                                      struct rf_channel *rf, const int txpower)
 591 {
 592         /*
 593          * Set TXpower.
 594          */
 595         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 596
 597         /*
 598          * For RT2525E we should first set the channel to half band higher.
 599          */
 600         if (rt2x00_rf(rt2x00dev, RF2525E)) {
 601                 static const u32 vals[] = {
 602                         0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
 603                         0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
 604                         0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
 605                         0x00000902, 0x00000906
 606                 };
 607
 608                 rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 609                 if (rf->rf4)
 610                         rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 611         }
 612
 613         rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
 614         rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
 615         rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
 616         if (rf->rf4)
 617                 rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 618 }
 619
 620 static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 621                                      const int txpower)
 622 {
 623         u32 rf3;
 624
 625         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 626         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 627         rt2500usb_rf_write(rt2x00dev, 3, rf3);
 628 }
 629
 630 static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev,
 631                                 struct rt2x00lib_conf *libconf)
 632 {
 633         enum dev_state state =
 634             (libconf->conf->flags & IEEE80211_CONF_PS) ?
 635                 STATE_SLEEP : STATE_AWAKE;
 636         u16 reg;
 637
 638         if (state == STATE_SLEEP) {
 639                 rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 640                 rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON,
 641                                    rt2x00dev->beacon_int - 20);
 642                 rt2x00_set_field16(&reg, MAC_CSR18_BEACONS_BEFORE_WAKEUP,
 643                                    libconf->conf->listen_interval - 1);
 644
 645                 /* We must first disable autowake before it can be enabled */
 646                 rt2x00_set_field16(&reg, MAC_CSR18_AUTO_WAKE, 0);
 647                 rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 648
 649                 rt2x00_set_field16(&reg, MAC_CSR18_AUTO_WAKE, 1);
 650                 rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 651         } else {
 652                 rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 653                 rt2x00_set_field16(&reg, MAC_CSR18_AUTO_WAKE, 0);
 654                 rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 655         }
 656
 657         rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
 658 }
 659
 660 static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 661                              struct rt2x00lib_conf *libconf,
 662                              const unsigned int flags)
 663 {
 664         if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
 665                 rt2500usb_config_channel(rt2x00dev, &libconf->rf,
 666                                          libconf->conf->power_level);
 667         if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
 668             !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 669                 rt2500usb_config_txpower(rt2x00dev,
 670                                          libconf->conf->power_level);
 671         if (flags & IEEE80211_CONF_CHANGE_PS)
 672                 rt2500usb_config_ps(rt2x00dev, libconf);
 673 }
 674
 675 /*
 676  * Link tuning
 677  */
 678 static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev,
 679                                  struct link_qual *qual)
 680 {
 681         u16 reg;
 682
 683         /*
 684          * Update FCS error count from register.
 685          */
 686         rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
 687         qual->rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
 688
 689         /*
 690          * Update False CCA count from register.
 691          */
 692         rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
 693         qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
 694 }
 695
 696 static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
 697                                   struct link_qual *qual)
 698 {
 699         u16 eeprom;
 700         u16 value;
 701
 702         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
 703         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
 704         rt2500usb_bbp_write(rt2x00dev, 24, value);
 705
 706         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
 707         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
 708         rt2500usb_bbp_write(rt2x00dev, 25, value);
 709
 710         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
 711         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
 712         rt2500usb_bbp_write(rt2x00dev, 61, value);
 713
 714         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
 715         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
 716         rt2500usb_bbp_write(rt2x00dev, 17, value);
 717
 718         qual->vgc_level = value;
 719 }
 720
 721 /*
 722  * Initialization functions.
 723  */
 724 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 725 {
 726         u16 reg;
 727
 728         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
 729                                     USB_MODE_TEST, REGISTER_TIMEOUT);
 730         rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
 731                                     0x00f0, REGISTER_TIMEOUT);
 732
 733         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 734         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
 735         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 736
 737         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
 738         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
 739
 740         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 741         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
 742         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
 743         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 744         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 745
 746         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 747         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 748         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 749         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 750         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 751
 752         rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
 753         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
 754         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
 755         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
 756         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
 757         rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
 758
 759         rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
 760         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
 761         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
 762         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
 763         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
 764         rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
 765
 766         rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
 767         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
 768         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
 769         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
 770         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
 771         rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
 772
 773         rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
 774         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
 775         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
 776         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
 777         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
 778         rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 779
 780         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 781         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
 782         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
 783         rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
 784         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
 785         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 786
 787         rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
 788         rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
 789
 790         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 791                 return -EBUSY;
 792
 793         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 794         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 795         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 796         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 797         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 798
 799         if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) {
 800                 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 801                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
 802         } else {
 803                 reg = 0;
 804                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 1);
 805                 rt2x00_set_field16(&reg, PHY_CSR2_LNA_MODE, 3);
 806         }
 807         rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
 808
 809         rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
 810         rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
 811         rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
 812         rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
 813
 814         rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 815         rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
 816                            rt2x00dev->rx->data_size);
 817         rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
 818
 819         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 820         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 821         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
 822         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 823
 824         rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 825         rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
 826         rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 827
 828         rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
 829         rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
 830         rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
 831
 832         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 833         rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
 834         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 835
 836         return 0;
 837 }
 838
 839 static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
 840 {
 841         unsigned int i;
 842         u8 value;
 843
 844         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 845                 rt2500usb_bbp_read(rt2x00dev, 0, &value);
 846                 if ((value != 0xff) && (value != 0x00))
 847                         return 0;
 848                 udelay(REGISTER_BUSY_DELAY);
 849         }
 850
 851         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 852         return -EACCES;
 853 }
 854
 855 static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 856 {
 857         unsigned int i;
 858         u16 eeprom;
 859         u8 value;
 860         u8 reg_id;
 861
 862         if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev)))
 863                 return -EACCES;
 864
 865         rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
 866         rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
 867         rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
 868         rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
 869         rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
 870         rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
 871         rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
 872         rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
 873         rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
 874         rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
 875         rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
 876         rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
 877         rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
 878         rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
 879         rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
 880         rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
 881         rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
 882         rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
 883         rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
 884         rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
 885         rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
 886         rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
 887         rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
 888         rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
 889         rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
 890         rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
 891         rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
 892         rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
 893         rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
 894         rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
 895         rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
 896
 897         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 898                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 899
 900                 if (eeprom != 0xffff && eeprom != 0x0000) {
 901                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 902                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 903                         rt2500usb_bbp_write(rt2x00dev, reg_id, value);
 904                 }
 905         }
 906
 907         return 0;
 908 }
 909
 910 /*
 911  * Device state switch handlers.
 912  */
 913 static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 914                                 enum dev_state state)
 915 {
 916         u16 reg;
 917
 918         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 919         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
 920                            (state == STATE_RADIO_RX_OFF) ||
 921                            (state == STATE_RADIO_RX_OFF_LINK));
 922         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 923 }
 924
 925 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 926 {
 927         /*
 928          * Initialize all registers.
 929          */
 930         if (unlikely(rt2500usb_init_registers(rt2x00dev) ||
 931                      rt2500usb_init_bbp(rt2x00dev)))
 932                 return -EIO;
 933
 934         return 0;
 935 }
 936
 937 static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 938 {
 939         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
 940         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
 941
 942         /*
 943          * Disable synchronisation.
 944          */
 945         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
 946
 947         rt2x00usb_disable_radio(rt2x00dev);
 948 }
 949
 950 static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
 951                                enum dev_state state)
 952 {
 953         u16 reg;
 954         u16 reg2;
 955         unsigned int i;
 956         char put_to_sleep;
 957         char bbp_state;
 958         char rf_state;
 959
 960         put_to_sleep = (state != STATE_AWAKE);
 961
 962         reg = 0;
 963         rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
 964         rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
 965         rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
 966         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 967         rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
 968         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 969
 970         /*
 971          * Device is not guaranteed to be in the requested state yet.
 972          * We must wait until the register indicates that the
 973          * device has entered the correct state.
 974          */
 975         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 976                 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
 977                 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
 978                 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
 979                 if (bbp_state == state && rf_state == state)
 980                         return 0;
 981                 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 982                 msleep(30);
 983         }
 984
 985         return -EBUSY;
 986 }
 987
 988 static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 989                                       enum dev_state state)
 990 {
 991         int retval = 0;
 992
 993         switch (state) {
 994         case STATE_RADIO_ON:
 995                 retval = rt2500usb_enable_radio(rt2x00dev);
 996                 break;
 997         case STATE_RADIO_OFF:
 998                 rt2500usb_disable_radio(rt2x00dev);
 999                 break;
1000         case STATE_RADIO_RX_ON:
1001         case STATE_RADIO_RX_ON_LINK:
1002         case STATE_RADIO_RX_OFF:
1003         case STATE_RADIO_RX_OFF_LINK:
1004                 rt2500usb_toggle_rx(rt2x00dev, state);
1005                 break;
1006         case STATE_RADIO_IRQ_ON:
1007         case STATE_RADIO_IRQ_OFF:
1008                 /* No support, but no error either */
1009                 break;
1010         case STATE_DEEP_SLEEP:
1011         case STATE_SLEEP:
1012         case STATE_STANDBY:
1013         case STATE_AWAKE:
1014                 retval = rt2500usb_set_state(rt2x00dev, state);
1015                 break;
1016         default:
1017                 retval = -ENOTSUPP;
1018                 break;
1019         }
1020
1021         if (unlikely(retval))
1022                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1023                       state, retval);
1024
1025         return retval;
1026 }
1027
1028 /*
1029  * TX descriptor initialization
1030  */
1031 static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1032                                     struct sk_buff *skb,
1033                                     struct txentry_desc *txdesc)
1034 {
1035         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1036         __le32 *txd = skbdesc->desc;
1037         u32 word;
1038
1039         /*
1040          * Start writing the descriptor words.
1041          */
1042         rt2x00_desc_read(txd, 1, &word);
1043         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
1044         rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
1045         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1046         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1047         rt2x00_desc_write(txd, 1, word);
1048
1049         rt2x00_desc_read(txd, 2, &word);
1050         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1051         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1052         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1053         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1054         rt2x00_desc_write(txd, 2, word);
1055
1056         if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1057                 _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
1058                 _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
1059         }
1060
1061         rt2x00_desc_read(txd, 0, &word);
1062         rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
1063         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1064                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1065         rt2x00_set_field32(&word, TXD_W0_ACK,
1066                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1067         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1068                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1069         rt2x00_set_field32(&word, TXD_W0_OFDM,
1070                            (txdesc->rate_mode == RATE_MODE_OFDM));
1071         rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1072                            test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
1073         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1074         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
1075         rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
1076         rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
1077         rt2x00_desc_write(txd, 0, word);
1078 }
1079
1080 /*
1081  * TX data initialization
1082  */
1083 static void rt2500usb_beacondone(struct urb *urb);
1084
1085 static void rt2500usb_write_beacon(struct queue_entry *entry)
1086 {
1087         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1088         struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
1089         struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
1090         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1091         int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
1092         int length;
1093         u16 reg;
1094
1095         /*
1096          * Add the descriptor in front of the skb.
1097          */
1098         skb_push(entry->skb, entry->queue->desc_size);
1099         memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
1100         skbdesc->desc = entry->skb->data;
1101
1102         /*
1103          * Disable beaconing while we are reloading the beacon data,
1104          * otherwise we might be sending out invalid data.
1105          */
1106         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1107         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
1108         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1109
1110         /*
1111          * USB devices cannot blindly pass the skb->len as the
1112          * length of the data to usb_fill_bulk_urb. Pass the skb
1113          * to the driver to determine what the length should be.
1114          */
1115         length = rt2x00dev->ops->lib->get_tx_data_len(entry);
1116
1117         usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
1118                           entry->skb->data, length, rt2500usb_beacondone,
1119                           entry);
1120
1121         /*
1122          * Second we need to create the guardian byte.
1123          * We only need a single byte, so lets recycle
1124          * the 'flags' field we are not using for beacons.
1125          */
1126         bcn_priv->guardian_data = 0;
1127         usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
1128                           &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
1129                           entry);
1130
1131         /*
1132          * Send out the guardian byte.
1133          */
1134         usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
1135 }
1136
1137 static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
1138 {
1139         int length;
1140
1141         /*
1142          * The length _must_ be a multiple of 2,
1143          * but it must _not_ be a multiple of the USB packet size.
1144          */
1145         length = roundup(entry->skb->len, 2);
1146         length += (2 * !(length % entry->queue->usb_maxpacket));
1147
1148         return length;
1149 }
1150
1151 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1152                                     const enum data_queue_qid queue)
1153 {
1154         u16 reg, reg0;
1155
1156         if (queue != QID_BEACON) {
1157                 rt2x00usb_kick_tx_queue(rt2x00dev, queue);
1158                 return;
1159         }
1160
1161         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1162         if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1163                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
1164                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
1165                 reg0 = reg;
1166                 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1167                 /*
1168                  * Beacon generation will fail initially.
1169                  * To prevent this we need to change the TXRX_CSR19
1170                  * register several times (reg0 is the same as reg
1171                  * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
1172                  * and 1 in reg).
1173                  */
1174                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1175                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
1176                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1177                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
1178                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1179         }
1180 }
1181
1182 /*
1183  * RX control handlers
1184  */
1185 static void rt2500usb_fill_rxdone(struct queue_entry *entry,
1186                                   struct rxdone_entry_desc *rxdesc)
1187 {
1188         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1189         struct queue_entry_priv_usb *entry_priv = entry->priv_data;
1190         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1191         __le32 *rxd =
1192             (__le32 *)(entry->skb->data +
1193                        (entry_priv->urb->actual_length -
1194                         entry->queue->desc_size));
1195         u32 word0;
1196         u32 word1;
1197
1198         /*
1199          * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1200          * frame data in rt2x00usb.
1201          */
1202         memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
1203         rxd = (__le32 *)skbdesc->desc;
1204
1205         /*
1206          * It is now safe to read the descriptor on all architectures.
1207          */
1208         rt2x00_desc_read(rxd, 0, &word0);
1209         rt2x00_desc_read(rxd, 1, &word1);
1210
1211         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1212                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1213         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1214                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1215
1216         rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
1217         if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1218                 rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
1219
1220         if (rxdesc->cipher != CIPHER_NONE) {
1221                 _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
1222                 _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]);
1223                 rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
1224
1225                 /* ICV is located at the end of frame */
1226
1227                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
1228                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
1229                         rxdesc->flags |= RX_FLAG_DECRYPTED;
1230                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
1231                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
1232         }
1233
1234         /*
1235          * Obtain the status about this packet.
1236          * When frame was received with an OFDM bitrate,
1237          * the signal is the PLCP value. If it was received with
1238          * a CCK bitrate the signal is the rate in 100kbit/s.
1239          */
1240         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1241         rxdesc->rssi =
1242             rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset;
1243         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1244
1245         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1246                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1247         else
1248                 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
1249         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1250                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1251
1252         /*
1253          * Adjust the skb memory window to the frame boundaries.
1254          */
1255         skb_trim(entry->skb, rxdesc->size);
1256 }
1257
1258 /*
1259  * Interrupt functions.
1260  */
1261 static void rt2500usb_beacondone(struct urb *urb)
1262 {
1263         struct queue_entry *entry = (struct queue_entry *)urb->context;
1264         struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
1265
1266         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
1267                 return;
1268
1269         /*
1270          * Check if this was the guardian beacon,
1271          * if that was the case we need to send the real beacon now.
1272          * Otherwise we should free the sk_buffer, the device
1273          * should be doing the rest of the work now.
1274          */
1275         if (bcn_priv->guardian_urb == urb) {
1276                 usb_submit_urb(bcn_priv->urb, GFP_ATOMIC);
1277         } else if (bcn_priv->urb == urb) {
1278                 dev_kfree_skb(entry->skb);
1279                 entry->skb = NULL;
1280         }
1281 }
1282
1283 /*
1284  * Device probe functions.
1285  */
1286 static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1287 {
1288         u16 word;
1289         u8 *mac;
1290         u8 bbp;
1291
1292         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1293
1294         /*
1295          * Start validation of the data that has been read.
1296          */
1297         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1298         if (!is_valid_ether_addr(mac)) {
1299                 random_ether_addr(mac);
1300                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
1301         }
1302
1303         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1304         if (word == 0xffff) {
1305                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1306                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1307                                    ANTENNA_SW_DIVERSITY);
1308                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1309                                    ANTENNA_SW_DIVERSITY);
1310                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1311                                    LED_MODE_DEFAULT);
1312                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1313                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1314                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1315                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1316                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1317         }
1318
1319         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1320         if (word == 0xffff) {
1321                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1322                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1323                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1324                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1325                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1326         }
1327
1328         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1329         if (word == 0xffff) {
1330                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1331                                    DEFAULT_RSSI_OFFSET);
1332                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1333                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1334         }
1335
1336         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1337         if (word == 0xffff) {
1338                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1339                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1340                 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1341         }
1342
1343         /*
1344          * Switch lower vgc bound to current BBP R17 value,
1345          * lower the value a bit for better quality.
1346          */
1347         rt2500usb_bbp_read(rt2x00dev, 17, &bbp);
1348         bbp -= 6;
1349
1350         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1351         if (word == 0xffff) {
1352                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1353                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1354                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1355                 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1356         } else {
1357                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1358                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1359         }
1360
1361         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1362         if (word == 0xffff) {
1363                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1364                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1365                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1366                 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1367         }
1368
1369         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1370         if (word == 0xffff) {
1371                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1372                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1373                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1374                 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1375         }
1376
1377         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1378         if (word == 0xffff) {
1379                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1380                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1381                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1382                 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1383         }
1384
1385         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1386         if (word == 0xffff) {
1387                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1388                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1389                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1390                 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1391         }
1392
1393         return 0;
1394 }
1395
1396 static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1397 {
1398         u16 reg;
1399         u16 value;
1400         u16 eeprom;
1401
1402         /*
1403          * Read EEPROM word for configuration.
1404          */
1405         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1406
1407         /*
1408          * Identify RF chipset.
1409          */
1410         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1411         rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1412         rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1413
1414         if (((reg & 0xfff0) != 0) || ((reg & 0x0000000f) == 0)) {
1415                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1416                 return -ENODEV;
1417         }
1418
1419         if (!rt2x00_rf(rt2x00dev, RF2522) &&
1420             !rt2x00_rf(rt2x00dev, RF2523) &&
1421             !rt2x00_rf(rt2x00dev, RF2524) &&
1422             !rt2x00_rf(rt2x00dev, RF2525) &&
1423             !rt2x00_rf(rt2x00dev, RF2525E) &&
1424             !rt2x00_rf(rt2x00dev, RF5222)) {
1425                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1426                 return -ENODEV;
1427         }
1428
1429         /*
1430          * Identify default antenna configuration.
1431          */
1432         rt2x00dev->default_ant.tx =
1433             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1434         rt2x00dev->default_ant.rx =
1435             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1436
1437         /*
1438          * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
1439          * I am not 100% sure about this, but the legacy drivers do not
1440          * indicate antenna swapping in software is required when
1441          * diversity is enabled.
1442          */
1443         if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
1444                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
1445         if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
1446                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
1447
1448         /*
1449          * Store led mode, for correct led behaviour.
1450          */
1451 #ifdef CONFIG_RT2X00_LIB_LEDS
1452         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1453
1454         rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1455         if (value == LED_MODE_TXRX_ACTIVITY ||
1456             value == LED_MODE_DEFAULT ||
1457             value == LED_MODE_ASUS)
1458                 rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
1459                                    LED_TYPE_ACTIVITY);
1460 #endif /* CONFIG_RT2X00_LIB_LEDS */
1461
1462         /*
1463          * Detect if this device has an hardware controlled radio.
1464          */
1465         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1466                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1467
1468         /*
1469          * Check if the BBP tuning should be disabled.
1470          */
1471         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1472         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1473                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1474
1475         /*
1476          * Read the RSSI <-> dBm offset information.
1477          */
1478         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1479         rt2x00dev->rssi_offset =
1480             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1481
1482         return 0;
1483 }
1484
1485 /*
1486  * RF value list for RF2522
1487  * Supports: 2.4 GHz
1488  */
1489 static const struct rf_channel rf_vals_bg_2522[] = {
1490         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1491         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1492         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1493         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1494         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1495         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1496         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1497         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1498         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1499         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1500         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1501         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1502         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1503         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1504 };
1505
1506 /*
1507  * RF value list for RF2523
1508  * Supports: 2.4 GHz
1509  */
1510 static const struct rf_channel rf_vals_bg_2523[] = {
1511         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1512         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1513         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1514         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1515         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1516         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1517         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1518         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1519         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1520         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1521         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1522         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1523         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1524         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1525 };
1526
1527 /*
1528  * RF value list for RF2524
1529  * Supports: 2.4 GHz
1530  */
1531 static const struct rf_channel rf_vals_bg_2524[] = {
1532         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1533         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1534         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1535         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1536         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1537         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1538         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1539         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1540         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1541         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1542         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1543         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1544         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1545         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1546 };
1547
1548 /*
1549  * RF value list for RF2525
1550  * Supports: 2.4 GHz
1551  */
1552 static const struct rf_channel rf_vals_bg_2525[] = {
1553         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1554         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1555         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1556         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1557         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1558         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1559         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1560         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1561         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1562         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1563         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1564         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1565         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1566         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1567 };
1568
1569 /*
1570  * RF value list for RF2525e
1571  * Supports: 2.4 GHz
1572  */
1573 static const struct rf_channel rf_vals_bg_2525e[] = {
1574         { 1,  0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1575         { 2,  0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1576         { 3,  0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1577         { 4,  0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1578         { 5,  0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1579         { 6,  0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1580         { 7,  0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1581         { 8,  0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1582         { 9,  0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1583         { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1584         { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1585         { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1586         { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1587         { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1588 };
1589
1590 /*
1591  * RF value list for RF5222
1592  * Supports: 2.4 GHz & 5.2 GHz
1593  */
1594 static const struct rf_channel rf_vals_5222[] = {
1595         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1596         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1597         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1598         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1599         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1600         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1601         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1602         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1603         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1604         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1605         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1606         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1607         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1608         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1609
1610         /* 802.11 UNI / HyperLan 2 */
1611         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1612         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1613         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1614         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1615         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1616         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1617         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1618         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1619
1620         /* 802.11 HyperLan 2 */
1621         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1622         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1623         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1624         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1625         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1626         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1627         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1628         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1629         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1630         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1631
1632         /* 802.11 UNII */
1633         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1634         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1635         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1636         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1637         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1638 };
1639
1640 static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1641 {
1642         struct hw_mode_spec *spec = &rt2x00dev->spec;
1643         struct channel_info *info;
1644         char *tx_power;
1645         unsigned int i;
1646
1647         /*
1648          * Initialize all hw fields.
1649          */
1650         rt2x00dev->hw->flags =
1651             IEEE80211_HW_RX_INCLUDES_FCS |
1652             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1653             IEEE80211_HW_SIGNAL_DBM |
1654             IEEE80211_HW_SUPPORTS_PS |
1655             IEEE80211_HW_PS_NULLFUNC_STACK;
1656
1657         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
1658         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1659                                 rt2x00_eeprom_addr(rt2x00dev,
1660                                                    EEPROM_MAC_ADDR_0));
1661
1662         /*
1663          * Initialize hw_mode information.
1664          */
1665         spec->supported_bands = SUPPORT_BAND_2GHZ;
1666         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1667
1668         if (rt2x00_rf(rt2x00dev, RF2522)) {
1669                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1670                 spec->channels = rf_vals_bg_2522;
1671         } else if (rt2x00_rf(rt2x00dev, RF2523)) {
1672                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1673                 spec->channels = rf_vals_bg_2523;
1674         } else if (rt2x00_rf(rt2x00dev, RF2524)) {
1675                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1676                 spec->channels = rf_vals_bg_2524;
1677         } else if (rt2x00_rf(rt2x00dev, RF2525)) {
1678                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1679                 spec->channels = rf_vals_bg_2525;
1680         } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
1681                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1682                 spec->channels = rf_vals_bg_2525e;
1683         } else if (rt2x00_rf(rt2x00dev, RF5222)) {
1684                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1685                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1686                 spec->channels = rf_vals_5222;
1687         }
1688
1689         /*
1690          * Create channel information array
1691          */
1692         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
1693         if (!info)
1694                 return -ENOMEM;
1695
1696         spec->channels_info = info;
1697
1698         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1699         for (i = 0; i < 14; i++)
1700                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
1701
1702         if (spec->num_channels > 14) {
1703                 for (i = 14; i < spec->num_channels; i++)
1704                         info[i].tx_power1 = DEFAULT_TXPOWER;
1705         }
1706
1707         return 0;
1708 }
1709
1710 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1711 {
1712         int retval;
1713
1714         /*
1715          * Allocate eeprom data.
1716          */
1717         retval = rt2500usb_validate_eeprom(rt2x00dev);
1718         if (retval)
1719                 return retval;
1720
1721         retval = rt2500usb_init_eeprom(rt2x00dev);
1722         if (retval)
1723                 return retval;
1724
1725         /*
1726          * Initialize hw specifications.
1727          */
1728         retval = rt2500usb_probe_hw_mode(rt2x00dev);
1729         if (retval)
1730                 return retval;
1731
1732         /*
1733          * This device requires the atim queue
1734          */
1735         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1736         __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
1737         if (!modparam_nohwcrypt) {
1738                 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
1739                 __set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
1740         }
1741         __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1742
1743         /*
1744          * Set the rssi offset.
1745          */
1746         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1747
1748         return 0;
1749 }
1750
1751 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1752         .tx                     = rt2x00mac_tx,
1753         .start                  = rt2x00mac_start,
1754         .stop                   = rt2x00mac_stop,
1755         .add_interface          = rt2x00mac_add_interface,
1756         .remove_interface       = rt2x00mac_remove_interface,
1757         .config                 = rt2x00mac_config,
1758         .configure_filter       = rt2x00mac_configure_filter,
1759         .set_tim                = rt2x00mac_set_tim,
1760         .set_key                = rt2x00mac_set_key,
1761         .get_stats              = rt2x00mac_get_stats,
1762         .bss_info_changed       = rt2x00mac_bss_info_changed,
1763         .conf_tx                = rt2x00mac_conf_tx,
1764         .rfkill_poll            = rt2x00mac_rfkill_poll,
1765 };
1766
1767 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1768         .probe_hw               = rt2500usb_probe_hw,
1769         .initialize             = rt2x00usb_initialize,
1770         .uninitialize           = rt2x00usb_uninitialize,
1771         .clear_entry            = rt2x00usb_clear_entry,
1772         .set_device_state       = rt2500usb_set_device_state,
1773         .rfkill_poll            = rt2500usb_rfkill_poll,
1774         .link_stats             = rt2500usb_link_stats,
1775         .reset_tuner            = rt2500usb_reset_tuner,
1776         .write_tx_desc          = rt2500usb_write_tx_desc,
1777         .write_tx_data          = rt2x00usb_write_tx_data,
1778         .write_beacon           = rt2500usb_write_beacon,
1779         .get_tx_data_len        = rt2500usb_get_tx_data_len,
1780         .kick_tx_queue          = rt2500usb_kick_tx_queue,
1781         .kill_tx_queue          = rt2x00usb_kill_tx_queue,
1782         .fill_rxdone            = rt2500usb_fill_rxdone,
1783         .config_shared_key      = rt2500usb_config_key,
1784         .config_pairwise_key    = rt2500usb_config_key,
1785         .config_filter          = rt2500usb_config_filter,
1786         .config_intf            = rt2500usb_config_intf,
1787         .config_erp             = rt2500usb_config_erp,
1788         .config_ant             = rt2500usb_config_ant,
1789         .config                 = rt2500usb_config,
1790 };
1791
1792 static const struct data_queue_desc rt2500usb_queue_rx = {
1793         .entry_num              = RX_ENTRIES,
1794         .data_size              = DATA_FRAME_SIZE,
1795         .desc_size              = RXD_DESC_SIZE,
1796         .priv_size              = sizeof(struct queue_entry_priv_usb),
1797 };
1798
1799 static const struct data_queue_desc rt2500usb_queue_tx = {
1800         .entry_num              = TX_ENTRIES,
1801         .data_size              = DATA_FRAME_SIZE,
1802         .desc_size              = TXD_DESC_SIZE,
1803         .priv_size              = sizeof(struct queue_entry_priv_usb),
1804 };
1805
1806 static const struct data_queue_desc rt2500usb_queue_bcn = {
1807         .entry_num              = BEACON_ENTRIES,
1808         .data_size              = MGMT_FRAME_SIZE,
1809         .desc_size              = TXD_DESC_SIZE,
1810         .priv_size              = sizeof(struct queue_entry_priv_usb_bcn),
1811 };
1812
1813 static const struct data_queue_desc rt2500usb_queue_atim = {
1814         .entry_num              = ATIM_ENTRIES,
1815         .data_size              = DATA_FRAME_SIZE,
1816         .desc_size              = TXD_DESC_SIZE,
1817         .priv_size              = sizeof(struct queue_entry_priv_usb),
1818 };
1819
1820 static const struct rt2x00_ops rt2500usb_ops = {
1821         .name                   = KBUILD_MODNAME,
1822         .max_sta_intf           = 1,
1823         .max_ap_intf            = 1,
1824         .eeprom_size            = EEPROM_SIZE,
1825         .rf_size                = RF_SIZE,
1826         .tx_queues              = NUM_TX_QUEUES,
1827         .extra_tx_headroom      = TXD_DESC_SIZE,
1828         .rx                     = &rt2500usb_queue_rx,
1829         .tx                     = &rt2500usb_queue_tx,
1830         .bcn                    = &rt2500usb_queue_bcn,
1831         .atim                   = &rt2500usb_queue_atim,
1832         .lib                    = &rt2500usb_rt2x00_ops,
1833         .hw                     = &rt2500usb_mac80211_ops,
1834 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1835         .debugfs                = &rt2500usb_rt2x00debug,
1836 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1837 };
1838
1839 /*
1840  * rt2500usb module information.
1841  */
1842 static struct usb_device_id rt2500usb_device_table[] = {
1843         /* ASUS */
1844         { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1845         { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1846         /* Belkin */
1847         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1848         { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1849         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1850         /* Cisco Systems */
1851         { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1852         { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1853         { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1854         /* CNet */
1855         { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
1856         /* Conceptronic */
1857         { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1858         /* D-LINK */
1859         { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1860         /* Gigabyte */
1861         { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1862         { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1863         /* Hercules */
1864         { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1865         /* Melco */
1866         { USB_DEVICE(0x0411, 0x005e), USB_DEVICE_DATA(&rt2500usb_ops) },
1867         { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1868         { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1869         { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1870         { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1871         /* MSI */
1872         { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1873         { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1874         { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1875         /* Ralink */
1876         { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1877         { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1878         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1879         { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1880         /* Sagem */
1881         { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
1882         /* Siemens */
1883         { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1884         /* SMC */
1885         { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1886         /* Spairon */
1887         { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1888         /* SURECOM */
1889         { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
1890         /* Trust */
1891         { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1892         /* VTech */
1893         { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
1894         /* Zinwell */
1895         { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1896         { 0, }
1897 };
1898
1899 MODULE_AUTHOR(DRV_PROJECT);
1900 MODULE_VERSION(DRV_VERSION);
1901 MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1902 MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1903 MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1904 MODULE_LICENSE("GPL");
1905
1906 static struct usb_driver rt2500usb_driver = {
1907         .name           = KBUILD_MODNAME,
1908         .id_table       = rt2500usb_device_table,
1909         .probe          = rt2x00usb_probe,
1910         .disconnect     = rt2x00usb_disconnect,
1911         .suspend        = rt2x00usb_suspend,
1912         .resume         = rt2x00usb_resume,
1913 };
1914
1915 static int __init rt2500usb_init(void)
1916 {
1917         return usb_register(&rt2500usb_driver);
1918 }
1919
1920 static void __exit rt2500usb_exit(void)
1921 {
1922         usb_deregister(&rt2500usb_driver);
1923 }
1924
1925 module_init(rt2500usb_init);
1926 module_exit(rt2500usb_exit);