SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500usb.c

   1 /*
   2         Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500usb
  23         Abstract: rt2500usb device specific routines.
  24         Supported chipsets: RT2570.
  25  */
  26
  27 /*
  28  * Set enviroment defines for rt2x00.h
  29  */
  30 #define DRV_NAME "rt2500usb"
  31
  32 #include <linux/delay.h>
  33 #include <linux/etherdevice.h>
  34 #include <linux/init.h>
  35 #include <linux/kernel.h>
  36 #include <linux/module.h>
  37 #include <linux/usb.h>
  38
  39 #include "rt2x00.h"
  40 #include "rt2x00usb.h"
  41 #include "rt2500usb.h"
  42
  43 /*
  44  * Register access.
  45  * All access to the CSR registers will go through the methods
  46  * rt2500usb_register_read and rt2500usb_register_write.
  47  * BBP and RF register require indirect register access,
  48  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  49  * These indirect registers work with busy bits,
  50  * and we will try maximal REGISTER_BUSY_COUNT times to access
  51  * the register while taking a REGISTER_BUSY_DELAY us delay
  52  * between each attampt. When the busy bit is still set at that time,
  53  * the access attempt is considered to have failed,
  54  * and we will print an error.
  55  */
  56 static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev,
  57                                            const unsigned int offset,
  58                                            u16 *value)
  59 {
  60         __le16 reg;
  61         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  62                                       USB_VENDOR_REQUEST_IN, offset,
  63                                       &reg, sizeof(u16), REGISTER_TIMEOUT);
  64         *value = le16_to_cpu(reg);
  65 }
  66
  67 static inline void rt2500usb_register_multiread(const struct rt2x00_dev
  68                                                 *rt2x00dev,
  69                                                 const unsigned int offset,
  70                                                 void *value, const u16 length)
  71 {
  72         int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
  73         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  74                                       USB_VENDOR_REQUEST_IN, offset,
  75                                       value, length, timeout);
  76 }
  77
  78 static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev,
  79                                             const unsigned int offset,
  80                                             u16 value)
  81 {
  82         __le16 reg = cpu_to_le16(value);
  83         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  84                                       USB_VENDOR_REQUEST_OUT, offset,
  85                                       &reg, sizeof(u16), REGISTER_TIMEOUT);
  86 }
  87
  88 static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev
  89                                                  *rt2x00dev,
  90                                                  const unsigned int offset,
  91                                                  void *value, const u16 length)
  92 {
  93         int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
  94         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  95                                       USB_VENDOR_REQUEST_OUT, offset,
  96                                       value, length, timeout);
  97 }
  98
  99 static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
 100 {
 101         u16 reg;
 102         unsigned int i;
 103
 104         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 105                 rt2500usb_register_read(rt2x00dev, PHY_CSR8, &reg);
 106                 if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
 107                         break;
 108                 udelay(REGISTER_BUSY_DELAY);
 109         }
 110
 111         return reg;
 112 }
 113
 114 static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
 115                                 const unsigned int word, const u8 value)
 116 {
 117         u16 reg;
 118
 119         /*
 120          * Wait until the BBP becomes ready.
 121          */
 122         reg = rt2500usb_bbp_check(rt2x00dev);
 123         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 124                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 125                 return;
 126         }
 127
 128         /*
 129          * Write the data into the BBP.
 130          */
 131         reg = 0;
 132         rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
 133         rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 134         rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
 135
 136         rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
 137 }
 138
 139 static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
 140                                const unsigned int word, u8 *value)
 141 {
 142         u16 reg;
 143
 144         /*
 145          * Wait until the BBP becomes ready.
 146          */
 147         reg = rt2500usb_bbp_check(rt2x00dev);
 148         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 149                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
 150                 return;
 151         }
 152
 153         /*
 154          * Write the request into the BBP.
 155          */
 156         reg = 0;
 157         rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 158         rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
 159
 160         rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
 161
 162         /*
 163          * Wait until the BBP becomes ready.
 164          */
 165         reg = rt2500usb_bbp_check(rt2x00dev);
 166         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 167                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
 168                 *value = 0xff;
 169                 return;
 170         }
 171
 172         rt2500usb_register_read(rt2x00dev, PHY_CSR7, &reg);
 173         *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 174 }
 175
 176 static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev,
 177                                const unsigned int word, const u32 value)
 178 {
 179         u16 reg;
 180         unsigned int i;
 181
 182         if (!word)
 183                 return;
 184
 185         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 186                 rt2500usb_register_read(rt2x00dev, PHY_CSR10, &reg);
 187                 if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
 188                         goto rf_write;
 189                 udelay(REGISTER_BUSY_DELAY);
 190         }
 191
 192         ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
 193         return;
 194
 195 rf_write:
 196         reg = 0;
 197         rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
 198         rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg);
 199
 200         reg = 0;
 201         rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
 202         rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
 203         rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
 204         rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
 205
 206         rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg);
 207         rt2x00_rf_write(rt2x00dev, word, value);
 208 }
 209
 210 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 211 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
 212
 213 static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev,
 214                                const unsigned int word, u32 *data)
 215 {
 216         rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
 217 }
 218
 219 static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev,
 220                                 const unsigned int word, u32 data)
 221 {
 222         rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
 223 }
 224
 225 static const struct rt2x00debug rt2500usb_rt2x00debug = {
 226         .owner  = THIS_MODULE,
 227         .csr    = {
 228                 .read           = rt2500usb_read_csr,
 229                 .write          = rt2500usb_write_csr,
 230                 .word_size      = sizeof(u16),
 231                 .word_count     = CSR_REG_SIZE / sizeof(u16),
 232         },
 233         .eeprom = {
 234                 .read           = rt2x00_eeprom_read,
 235                 .write          = rt2x00_eeprom_write,
 236                 .word_size      = sizeof(u16),
 237                 .word_count     = EEPROM_SIZE / sizeof(u16),
 238         },
 239         .bbp    = {
 240                 .read           = rt2500usb_bbp_read,
 241                 .write          = rt2500usb_bbp_write,
 242                 .word_size      = sizeof(u8),
 243                 .word_count     = BBP_SIZE / sizeof(u8),
 244         },
 245         .rf     = {
 246                 .read           = rt2x00_rf_read,
 247                 .write          = rt2500usb_rf_write,
 248                 .word_size      = sizeof(u32),
 249                 .word_count     = RF_SIZE / sizeof(u32),
 250         },
 251 };
 252 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 253
 254 /*
 255  * Configuration handlers.
 256  */
 257 static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
 258 {
 259         __le16 reg[3];
 260
 261         memset(&reg, 0, sizeof(reg));
 262         memcpy(&reg, addr, ETH_ALEN);
 263
 264         /*
 265          * The MAC address is passed to us as an array of bytes,
 266          * that array is little endian, so no need for byte ordering.
 267          */
 268         rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, &reg, sizeof(reg));
 269 }
 270
 271 static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
 272 {
 273         __le16 reg[3];
 274
 275         memset(&reg, 0, sizeof(reg));
 276         memcpy(&reg, bssid, ETH_ALEN);
 277
 278         /*
 279          * The BSSID is passed to us as an array of bytes,
 280          * that array is little endian, so no need for byte ordering.
 281          */
 282         rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, &reg, sizeof(reg));
 283 }
 284
 285 static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
 286                                            const unsigned int filter)
 287 {
 288         int promisc = !!(filter & IFF_PROMISC);
 289         int multicast = !!(filter & IFF_MULTICAST);
 290         int broadcast = !!(filter & IFF_BROADCAST);
 291         u16 reg;
 292
 293         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 294         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME, !promisc);
 295         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST, !multicast);
 296         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, !broadcast);
 297         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 298 }
 299
 300 static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
 301 {
 302         u16 reg;
 303
 304         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
 305
 306         /*
 307          * Apply hardware packet filter.
 308          */
 309         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 310
 311         if (!is_monitor_present(&rt2x00dev->interface) &&
 312             (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
 313                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS, 1);
 314         else
 315                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS, 0);
 316
 317         /*
 318          * If there is a non-monitor interface present
 319          * the packet should be strict (even if a monitor interface is present!).
 320          * When there is only 1 interface present which is in monitor mode
 321          * we should start accepting _all_ frames.
 322          */
 323         if (is_interface_present(&rt2x00dev->interface)) {
 324                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC, 1);
 325                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL, 1);
 326                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL, 1);
 327                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
 328         } else if (is_monitor_present(&rt2x00dev->interface)) {
 329                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC, 0);
 330                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL, 0);
 331                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL, 0);
 332                 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 0);
 333         }
 334
 335         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 336
 337         /*
 338          * Enable beacon config
 339          */
 340         rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
 341         rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET,
 342                            (PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6);
 343         if (type == IEEE80211_IF_TYPE_STA)
 344                 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW, 0);
 345         else
 346                 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW, 2);
 347         rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
 348
 349         /*
 350          * Enable synchronisation.
 351          */
 352         rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 353         rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
 354         rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 355
 356         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 357         if (is_interface_present(&rt2x00dev->interface)) {
 358                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
 359                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
 360         }
 361
 362         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
 363         if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
 364                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 2);
 365         else if (type == IEEE80211_IF_TYPE_STA)
 366                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 1);
 367         else if (is_monitor_present(&rt2x00dev->interface) &&
 368                  !is_interface_present(&rt2x00dev->interface))
 369                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
 370
 371         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 372 }
 373
 374 static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
 375 {
 376         struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
 377         u16 reg;
 378         u16 value;
 379         u16 preamble;
 380
 381         if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
 382                 preamble = SHORT_PREAMBLE;
 383         else
 384                 preamble = PREAMBLE;
 385
 386         reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
 387
 388         rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg);
 389
 390         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 391         value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
 392                  SHORT_DIFS : DIFS) +
 393             PLCP + preamble + get_duration(ACK_SIZE, 10);
 394         rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, value);
 395         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 396
 397         rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
 398         if (preamble == SHORT_PREAMBLE)
 399                 rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1);
 400         else
 401                 rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0);
 402         rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
 403 }
 404
 405 static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
 406                                      const int phymode)
 407 {
 408         struct ieee80211_hw_mode *mode;
 409         struct ieee80211_rate *rate;
 410
 411         if (phymode == MODE_IEEE80211A)
 412                 rt2x00dev->curr_hwmode = HWMODE_A;
 413         else if (phymode == MODE_IEEE80211B)
 414                 rt2x00dev->curr_hwmode = HWMODE_B;
 415         else
 416                 rt2x00dev->curr_hwmode = HWMODE_G;
 417
 418         mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
 419         rate = &mode->rates[mode->num_rates - 1];
 420
 421         rt2500usb_config_rate(rt2x00dev, rate->val2);
 422
 423         if (phymode == MODE_IEEE80211B) {
 424                 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b);
 425                 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040);
 426         } else {
 427                 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005);
 428                 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c);
 429         }
 430 }
 431
 432 static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
 433                                      const int index, const int channel,
 434                                      const int txpower)
 435 {
 436         struct rf_channel reg;
 437
 438         /*
 439          * Fill rf_reg structure.
 440          */
 441         memcpy(&reg, &rt2x00dev->spec.channels[index], sizeof(reg));
 442
 443         /*
 444          * Set TXpower.
 445          */
 446         rt2x00_set_field32(&reg.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 447
 448         /*
 449          * For RT2525E we should first set the channel to half band higher.
 450          */
 451         if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
 452                 static const u32 vals[] = {
 453                         0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
 454                         0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
 455                         0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
 456                         0x00000902, 0x00000906
 457                 };
 458
 459                 rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]);
 460                 if (reg.rf4)
 461                         rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
 462         }
 463
 464         rt2500usb_rf_write(rt2x00dev, 1, reg.rf1);
 465         rt2500usb_rf_write(rt2x00dev, 2, reg.rf2);
 466         rt2500usb_rf_write(rt2x00dev, 3, reg.rf3);
 467         if (reg.rf4)
 468                 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
 469 }
 470
 471 static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 472                                      const int txpower)
 473 {
 474         u32 rf3;
 475
 476         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 477         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 478         rt2500usb_rf_write(rt2x00dev, 3, rf3);
 479 }
 480
 481 static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
 482                                      const int antenna_tx, const int antenna_rx)
 483 {
 484         u8 r2;
 485         u8 r14;
 486         u16 csr5;
 487         u16 csr6;
 488
 489         rt2500usb_bbp_read(rt2x00dev, 2, &r2);
 490         rt2500usb_bbp_read(rt2x00dev, 14, &r14);
 491         rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
 492         rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
 493
 494         /*
 495          * Configure the TX antenna.
 496          */
 497         switch (antenna_tx) {
 498         case ANTENNA_SW_DIVERSITY:
 499         case ANTENNA_HW_DIVERSITY:
 500                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
 501                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
 502                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
 503                 break;
 504         case ANTENNA_A:
 505                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 506                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
 507                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
 508                 break;
 509         case ANTENNA_B:
 510                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 511                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
 512                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
 513                 break;
 514         }
 515
 516         /*
 517          * Configure the RX antenna.
 518          */
 519         switch (antenna_rx) {
 520         case ANTENNA_SW_DIVERSITY:
 521         case ANTENNA_HW_DIVERSITY:
 522                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
 523                 break;
 524         case ANTENNA_A:
 525                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 526                 break;
 527         case ANTENNA_B:
 528                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 529                 break;
 530         }
 531
 532         /*
 533          * RT2525E and RT5222 need to flip TX I/Q
 534          */
 535         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 536             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 537                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 538                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
 539                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
 540
 541                 /*
 542                  * RT2525E does not need RX I/Q Flip.
 543                  */
 544                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 545                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 546         } else {
 547                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
 548                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
 549         }
 550
 551         rt2500usb_bbp_write(rt2x00dev, 2, r2);
 552         rt2500usb_bbp_write(rt2x00dev, 14, r14);
 553         rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
 554         rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
 555 }
 556
 557 static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
 558                                       const int short_slot_time,
 559                                       const int beacon_int)
 560 {
 561         u16 reg;
 562
 563         rt2500usb_register_write(rt2x00dev, MAC_CSR10,
 564                                  short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
 565
 566         rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 567         rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL, beacon_int * 4);
 568         rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 569 }
 570
 571 static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 572                              const unsigned int flags,
 573                              struct ieee80211_conf *conf)
 574 {
 575         int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
 576
 577         if (flags & CONFIG_UPDATE_PHYMODE)
 578                 rt2500usb_config_phymode(rt2x00dev, conf->phymode);
 579         if (flags & CONFIG_UPDATE_CHANNEL)
 580                 rt2500usb_config_channel(rt2x00dev, conf->channel_val,
 581                                          conf->channel, conf->power_level);
 582         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 583                 rt2500usb_config_txpower(rt2x00dev, conf->power_level);
 584         if (flags & CONFIG_UPDATE_ANTENNA)
 585                 rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
 586                                          conf->antenna_sel_rx);
 587         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 588                 rt2500usb_config_duration(rt2x00dev, short_slot_time,
 589                                           conf->beacon_int);
 590 }
 591
 592 /*
 593  * LED functions.
 594  */
 595 static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
 596 {
 597         u16 reg;
 598
 599         rt2500usb_register_read(rt2x00dev, MAC_CSR21, &reg);
 600         rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, 70);
 601         rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, 30);
 602         rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
 603
 604         rt2500usb_register_read(rt2x00dev, MAC_CSR20, &reg);
 605
 606         if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
 607                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 1);
 608                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 0);
 609         } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
 610                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 0);
 611                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 1);
 612         } else {
 613                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 1);
 614                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 1);
 615         }
 616
 617         rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
 618 }
 619
 620 static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev)
 621 {
 622         u16 reg;
 623
 624         rt2500usb_register_read(rt2x00dev, MAC_CSR20, &reg);
 625         rt2x00_set_field16(&reg, MAC_CSR20_LINK, 0);
 626         rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 0);
 627         rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
 628 }
 629
 630 /*
 631  * Link tuning
 632  */
 633 static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev)
 634 {
 635         u16 reg;
 636
 637         /*
 638          * Update FCS error count from register.
 639          */
 640         rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
 641         rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
 642
 643         /*
 644          * Update False CCA count from register.
 645          */
 646         rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
 647         rt2x00dev->link.false_cca =
 648             rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
 649 }
 650
 651 static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 652 {
 653         u16 eeprom;
 654         u16 value;
 655
 656         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
 657         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
 658         rt2500usb_bbp_write(rt2x00dev, 24, value);
 659
 660         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
 661         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
 662         rt2500usb_bbp_write(rt2x00dev, 25, value);
 663
 664         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
 665         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
 666         rt2500usb_bbp_write(rt2x00dev, 61, value);
 667
 668         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
 669         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
 670         rt2500usb_bbp_write(rt2x00dev, 17, value);
 671
 672         rt2x00dev->link.vgc_level = value;
 673 }
 674
 675 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 676 {
 677         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 678         u16 bbp_thresh;
 679         u16 vgc_bound;
 680         u16 sens;
 681         u16 r24;
 682         u16 r25;
 683         u16 r61;
 684         u16 r17_sens;
 685         u8 r17;
 686         u8 up_bound;
 687         u8 low_bound;
 688
 689         /*
 690          * Determine the BBP tuning threshold and correctly
 691          * set BBP 24, 25 and 61.
 692          */
 693         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
 694         bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
 695
 696         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
 697         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
 698         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
 699
 700         if ((rssi + bbp_thresh) > 0) {
 701                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
 702                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
 703                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
 704         } else {
 705                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
 706                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
 707                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
 708         }
 709
 710         rt2500usb_bbp_write(rt2x00dev, 24, r24);
 711         rt2500usb_bbp_write(rt2x00dev, 25, r25);
 712         rt2500usb_bbp_write(rt2x00dev, 61, r61);
 713
 714         /*
 715          * Read current r17 value, as well as the sensitivity values
 716          * for the r17 register.
 717          */
 718         rt2500usb_bbp_read(rt2x00dev, 17, &r17);
 719         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
 720
 721         /*
 722          * A too low RSSI will cause too much false CCA which will
 723          * then corrupt the R17 tuning. To remidy this the tuning should
 724          * be stopped (While making sure the R17 value will not exceed limits)
 725          */
 726         if (rssi >= -40) {
 727                 if (r17 != 0x60)
 728                         rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
 729                 return;
 730         }
 731
 732         /*
 733          * Special big-R17 for short distance
 734          */
 735         if (rssi >= -58) {
 736                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
 737                 if (r17 != sens)
 738                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 739                 return;
 740         }
 741
 742         /*
 743          * Special mid-R17 for middle distance
 744          */
 745         if (rssi >= -74) {
 746                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
 747                 if (r17 != sens)
 748                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 749                 return;
 750         }
 751
 752         /*
 753          * Leave short or middle distance condition, restore r17
 754          * to the dynamic tuning range.
 755          */
 756         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
 757         vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
 758
 759         low_bound = 0x32;
 760         if (rssi >= -77)
 761                 up_bound = vgc_bound;
 762         else
 763                 up_bound = vgc_bound - (-77 - rssi);
 764
 765         if (up_bound < low_bound)
 766                 up_bound = low_bound;
 767
 768         if (r17 > up_bound) {
 769                 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
 770                 rt2x00dev->link.vgc_level = up_bound;
 771         } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
 772                 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
 773                 rt2x00dev->link.vgc_level = r17;
 774         } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
 775                 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
 776                 rt2x00dev->link.vgc_level = r17;
 777         }
 778 }
 779
 780 /*
 781  * Initialization functions.
 782  */
 783 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 784 {
 785         u16 reg;
 786
 787         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
 788                                     USB_MODE_TEST, REGISTER_TIMEOUT);
 789         rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
 790                                     0x00f0, REGISTER_TIMEOUT);
 791
 792         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 793         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
 794         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 795
 796         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
 797         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
 798
 799         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 800         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
 801         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
 802         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 803         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 804
 805         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 806         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 807         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 808         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 809         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 810
 811         rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
 812         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
 813         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
 814         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
 815         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
 816         rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
 817
 818         rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
 819         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
 820         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
 821         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
 822         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
 823         rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
 824
 825         rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
 826         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
 827         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
 828         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
 829         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
 830         rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
 831
 832         rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
 833         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
 834         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
 835         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
 836         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
 837         rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 838
 839         rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
 840         rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
 841
 842         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 843                 return -EBUSY;
 844
 845         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 846         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 847         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 848         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 849         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 850
 851         if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
 852                 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 853                 reg &= ~0x0002;
 854         } else {
 855                 reg = 0x3002;
 856         }
 857         rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
 858
 859         rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
 860         rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
 861         rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
 862         rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
 863
 864         rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 865         rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
 866                            rt2x00dev->rx->data_size);
 867         rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
 868
 869         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 870         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 871         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
 872         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 873
 874         rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 875         rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
 876         rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 877
 878         rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
 879         rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
 880         rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
 881
 882         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 883         rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
 884         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 885
 886         return 0;
 887 }
 888
 889 static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 890 {
 891         unsigned int i;
 892         u16 eeprom;
 893         u8 value;
 894         u8 reg_id;
 895
 896         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 897                 rt2500usb_bbp_read(rt2x00dev, 0, &value);
 898                 if ((value != 0xff) && (value != 0x00))
 899                         goto continue_csr_init;
 900                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
 901                 udelay(REGISTER_BUSY_DELAY);
 902         }
 903
 904         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 905         return -EACCES;
 906
 907 continue_csr_init:
 908         rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
 909         rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
 910         rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
 911         rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
 912         rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
 913         rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
 914         rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
 915         rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
 916         rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
 917         rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
 918         rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
 919         rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
 920         rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
 921         rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
 922         rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
 923         rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
 924         rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
 925         rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
 926         rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
 927         rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
 928         rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
 929         rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
 930         rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
 931         rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
 932         rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
 933         rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
 934         rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
 935         rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
 936         rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
 937         rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
 938         rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
 939
 940         DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
 941         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 942                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 943
 944                 if (eeprom != 0xffff && eeprom != 0x0000) {
 945                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 946                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 947                         DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
 948                               reg_id, value);
 949                         rt2500usb_bbp_write(rt2x00dev, reg_id, value);
 950                 }
 951         }
 952         DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
 953
 954         return 0;
 955 }
 956
 957 /*
 958  * Device state switch handlers.
 959  */
 960 static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 961                                 enum dev_state state)
 962 {
 963         u16 reg;
 964
 965         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 966         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
 967                            state == STATE_RADIO_RX_OFF);
 968         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 969 }
 970
 971 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 972 {
 973         /*
 974          * Initialize all registers.
 975          */
 976         if (rt2500usb_init_registers(rt2x00dev) ||
 977             rt2500usb_init_bbp(rt2x00dev)) {
 978                 ERROR(rt2x00dev, "Register initialization failed.\n");
 979                 return -EIO;
 980         }
 981
 982         rt2x00usb_enable_radio(rt2x00dev);
 983
 984         /*
 985          * Enable LED
 986          */
 987         rt2500usb_enable_led(rt2x00dev);
 988
 989         return 0;
 990 }
 991
 992 static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 993 {
 994         /*
 995          * Disable LED
 996          */
 997         rt2500usb_disable_led(rt2x00dev);
 998
 999         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
1000         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
1001
1002         /*
1003          * Disable synchronisation.
1004          */
1005         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1006
1007         rt2x00usb_disable_radio(rt2x00dev);
1008 }
1009
1010 static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
1011                                enum dev_state state)
1012 {
1013         u16 reg;
1014         u16 reg2;
1015         unsigned int i;
1016         char put_to_sleep;
1017         char bbp_state;
1018         char rf_state;
1019
1020         put_to_sleep = (state != STATE_AWAKE);
1021
1022         reg = 0;
1023         rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
1024         rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
1025         rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
1026         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1027         rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
1028         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1029
1030         /*
1031          * Device is not guaranteed to be in the requested state yet.
1032          * We must wait until the register indicates that the
1033          * device has entered the correct state.
1034          */
1035         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1036                 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
1037                 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
1038                 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
1039                 if (bbp_state == state && rf_state == state)
1040                         return 0;
1041                 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1042                 msleep(30);
1043         }
1044
1045         NOTICE(rt2x00dev, "Device failed to enter state %d, "
1046                "current device state: bbp %d and rf %d.\n",
1047                state, bbp_state, rf_state);
1048
1049         return -EBUSY;
1050 }
1051
1052 static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1053                                       enum dev_state state)
1054 {
1055         int retval = 0;
1056
1057         switch (state) {
1058         case STATE_RADIO_ON:
1059                 retval = rt2500usb_enable_radio(rt2x00dev);
1060                 break;
1061         case STATE_RADIO_OFF:
1062                 rt2500usb_disable_radio(rt2x00dev);
1063                 break;
1064         case STATE_RADIO_RX_ON:
1065         case STATE_RADIO_RX_OFF:
1066                 rt2500usb_toggle_rx(rt2x00dev, state);
1067                 break;
1068         case STATE_DEEP_SLEEP:
1069         case STATE_SLEEP:
1070         case STATE_STANDBY:
1071         case STATE_AWAKE:
1072                 retval = rt2500usb_set_state(rt2x00dev, state);
1073                 break;
1074         default:
1075                 retval = -ENOTSUPP;
1076                 break;
1077         }
1078
1079         return retval;
1080 }
1081
1082 /*
1083  * TX descriptor initialization
1084  */
1085 static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1086                                     struct data_desc *txd,
1087                                     struct data_entry_desc *desc,
1088                                     struct ieee80211_hdr *ieee80211hdr,
1089                                     unsigned int length,
1090                                     struct ieee80211_tx_control *control)
1091 {
1092         u32 word;
1093
1094         /*
1095          * Start writing the descriptor words.
1096          */
1097         rt2x00_desc_read(txd, 1, &word);
1098         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1099         rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs);
1100         rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1101         rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1102         rt2x00_desc_write(txd, 1, word);
1103
1104         rt2x00_desc_read(txd, 2, &word);
1105         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1106         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1107         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1108         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1109         rt2x00_desc_write(txd, 2, word);
1110
1111         rt2x00_desc_read(txd, 0, &word);
1112         rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit);
1113         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1114                            test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1115         rt2x00_set_field32(&word, TXD_W0_ACK,
1116                            !(control->flags & IEEE80211_TXCTL_NO_ACK));
1117         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1118                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1119         rt2x00_set_field32(&word, TXD_W0_OFDM,
1120                            test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1121         rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1122                            !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT));
1123         rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1124         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1125         rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
1126         rt2x00_desc_write(txd, 0, word);
1127 }
1128
1129 /*
1130  * TX data initialization
1131  */
1132 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1133                                     unsigned int queue)
1134 {
1135         u16 reg;
1136
1137         if (queue != IEEE80211_TX_QUEUE_BEACON)
1138                 return;
1139
1140         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1141         if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1142                 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1143                 /*
1144                  * Beacon generation will fail initially.
1145                  * To prevent this we need to register the TXRX_CSR19
1146                  * register several times.
1147                  */
1148                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1149                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1150                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1151                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1152                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1153         }
1154 }
1155
1156 /*
1157  * RX control handlers
1158  */
1159 static int rt2500usb_fill_rxdone(struct data_entry *entry,
1160                                  int *signal, int *rssi, int *ofdm, int *size)
1161 {
1162         struct urb *urb = entry->priv;
1163         struct data_desc *rxd = (struct data_desc *)(entry->skb->data +
1164                                                      (urb->actual_length -
1165                                                       entry->ring->desc_size));
1166         u32 word0;
1167         u32 word1;
1168
1169         rt2x00_desc_read(rxd, 0, &word0);
1170         rt2x00_desc_read(rxd, 1, &word1);
1171
1172         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1173             rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
1174             rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1175                 return -EINVAL;
1176
1177         /*
1178          * Obtain the status about this packet.
1179          */
1180         *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1181         *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
1182             entry->ring->rt2x00dev->rssi_offset;
1183         *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1184         *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1185
1186         return 0;
1187 }
1188
1189 /*
1190  * Interrupt functions.
1191  */
1192 static void rt2500usb_beacondone(struct urb *urb)
1193 {
1194         struct data_entry *entry = (struct data_entry *)urb->context;
1195         struct data_ring *ring = entry->ring;
1196
1197         if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags))
1198                 return;
1199
1200         /*
1201          * Check if this was the guardian beacon,
1202          * if that was the case we need to send the real beacon now.
1203          * Otherwise we should free the sk_buffer, the device
1204          * should be doing the rest of the work now.
1205          */
1206         if (ring->index == 1) {
1207                 rt2x00_ring_index_done_inc(ring);
1208                 entry = rt2x00_get_data_entry(ring);
1209                 usb_submit_urb(entry->priv, GFP_ATOMIC);
1210                 rt2x00_ring_index_inc(ring);
1211         } else if (ring->index_done == 1) {
1212                 entry = rt2x00_get_data_entry_done(ring);
1213                 if (entry->skb) {
1214                         dev_kfree_skb(entry->skb);
1215                         entry->skb = NULL;
1216                 }
1217                 rt2x00_ring_index_done_inc(ring);
1218         }
1219 }
1220
1221 /*
1222  * Device probe functions.
1223  */
1224 static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1225 {
1226         u16 word;
1227         u8 *mac;
1228
1229         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1230
1231         /*
1232          * Start validation of the data that has been read.
1233          */
1234         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1235         if (!is_valid_ether_addr(mac)) {
1236                 random_ether_addr(mac);
1237                 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
1238         }
1239
1240         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1241         if (word == 0xffff) {
1242                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1243                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
1244                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
1245                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
1246                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1247                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1248                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1249                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1250                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1251         }
1252
1253         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1254         if (word == 0xffff) {
1255                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1256                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1257                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1258                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1259                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1260         }
1261
1262         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1263         if (word == 0xffff) {
1264                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1265                                    DEFAULT_RSSI_OFFSET);
1266                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1267                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1268         }
1269
1270         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1271         if (word == 0xffff) {
1272                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1273                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1274                 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1275         }
1276
1277         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1278         if (word == 0xffff) {
1279                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1280                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1281                 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1282         }
1283
1284         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1285         if (word == 0xffff) {
1286                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1287                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1288                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1289                 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1290         }
1291
1292         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1293         if (word == 0xffff) {
1294                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1295                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1296                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1297                 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1298         }
1299
1300         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1301         if (word == 0xffff) {
1302                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1303                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1304                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1305                 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1306         }
1307
1308         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1309         if (word == 0xffff) {
1310                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1311                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1312                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1313                 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1314         }
1315
1316         return 0;
1317 }
1318
1319 static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1320 {
1321         u16 reg;
1322         u16 value;
1323         u16 eeprom;
1324
1325         /*
1326          * Read EEPROM word for configuration.
1327          */
1328         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1329
1330         /*
1331          * Identify RF chipset.
1332          */
1333         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1334         rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1335         rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1336
1337         if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) {
1338                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1339                 return -ENODEV;
1340         }
1341
1342         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1343             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1344             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1345             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1346             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1347             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1348                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1349                 return -ENODEV;
1350         }
1351
1352         /*
1353          * Identify default antenna configuration.
1354          */
1355         rt2x00dev->hw->conf.antenna_sel_tx =
1356             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1357         rt2x00dev->hw->conf.antenna_sel_rx =
1358             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1359
1360         /*
1361          * Store led mode, for correct led behaviour.
1362          */
1363         rt2x00dev->led_mode =
1364             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1365
1366         /*
1367          * Check if the BBP tuning should be disabled.
1368          */
1369         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1370         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1371                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1372
1373         /*
1374          * Read the RSSI <-> dBm offset information.
1375          */
1376         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1377         rt2x00dev->rssi_offset =
1378             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1379
1380         return 0;
1381 }
1382
1383 /*
1384  * RF value list for RF2522
1385  * Supports: 2.4 GHz
1386  */
1387 static const struct rf_channel rf_vals_bg_2522[] = {
1388         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1389         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1390         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1391         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1392         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1393         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1394         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1395         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1396         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1397         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1398         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1399         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1400         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1401         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1402 };
1403
1404 /*
1405  * RF value list for RF2523
1406  * Supports: 2.4 GHz
1407  */
1408 static const struct rf_channel rf_vals_bg_2523[] = {
1409         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1410         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1411         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1412         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1413         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1414         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1415         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1416         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1417         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1418         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1419         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1420         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1421         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1422         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1423 };
1424
1425 /*
1426  * RF value list for RF2524
1427  * Supports: 2.4 GHz
1428  */
1429 static const struct rf_channel rf_vals_bg_2524[] = {
1430         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1431         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1432         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1433         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1434         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1435         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1436         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1437         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1438         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1439         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1440         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1441         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1442         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1443         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1444 };
1445
1446 /*
1447  * RF value list for RF2525
1448  * Supports: 2.4 GHz
1449  */
1450 static const struct rf_channel rf_vals_bg_2525[] = {
1451         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1452         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1453         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1454         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1455         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1456         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1457         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1458         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1459         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1460         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1461         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1462         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1463         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1464         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1465 };
1466
1467 /*
1468  * RF value list for RF2525e
1469  * Supports: 2.4 GHz
1470  */
1471 static const struct rf_channel rf_vals_bg_2525e[] = {
1472         { 1,  0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1473         { 2,  0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1474         { 3,  0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1475         { 4,  0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1476         { 5,  0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1477         { 6,  0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1478         { 7,  0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1479         { 8,  0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1480         { 9,  0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1481         { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1482         { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1483         { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1484         { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1485         { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1486 };
1487
1488 /*
1489  * RF value list for RF5222
1490  * Supports: 2.4 GHz & 5.2 GHz
1491  */
1492 static const struct rf_channel rf_vals_5222[] = {
1493         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1494         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1495         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1496         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1497         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1498         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1499         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1500         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1501         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1502         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1503         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1504         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1505         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1506         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1507
1508         /* 802.11 UNI / HyperLan 2 */
1509         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1510         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1511         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1512         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1513         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1514         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1515         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1516         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1517
1518         /* 802.11 HyperLan 2 */
1519         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1520         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1521         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1522         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1523         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1524         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1525         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1526         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1527         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1528         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1529
1530         /* 802.11 UNII */
1531         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1532         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1533         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1534         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1535         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1536 };
1537
1538 static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1539 {
1540         struct hw_mode_spec *spec = &rt2x00dev->spec;
1541         u8 *txpower;
1542         unsigned int i;
1543
1544         /*
1545          * Initialize all hw fields.
1546          */
1547         rt2x00dev->hw->flags =
1548             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1549             IEEE80211_HW_RX_INCLUDES_FCS |
1550             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1551             IEEE80211_HW_MONITOR_DURING_OPER |
1552             IEEE80211_HW_NO_PROBE_FILTERING;
1553         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1554         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1555         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1556         rt2x00dev->hw->queues = 2;
1557
1558         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1559         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1560                                 rt2x00_eeprom_addr(rt2x00dev,
1561                                                    EEPROM_MAC_ADDR_0));
1562
1563         /*
1564          * Convert tx_power array in eeprom.
1565          */
1566         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1567         for (i = 0; i < 14; i++)
1568                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1569
1570         /*
1571          * Initialize hw_mode information.
1572          */
1573         spec->num_modes = 2;
1574         spec->num_rates = 12;
1575         spec->tx_power_a = NULL;
1576         spec->tx_power_bg = txpower;
1577         spec->tx_power_default = DEFAULT_TXPOWER;
1578
1579         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1580                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1581                 spec->channels = rf_vals_bg_2522;
1582         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1583                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1584                 spec->channels = rf_vals_bg_2523;
1585         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1586                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1587                 spec->channels = rf_vals_bg_2524;
1588         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1589                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1590                 spec->channels = rf_vals_bg_2525;
1591         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1592                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1593                 spec->channels = rf_vals_bg_2525e;
1594         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1595                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1596                 spec->channels = rf_vals_5222;
1597                 spec->num_modes = 3;
1598         }
1599 }
1600
1601 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1602 {
1603         int retval;
1604
1605         /*
1606          * Allocate eeprom data.
1607          */
1608         retval = rt2500usb_validate_eeprom(rt2x00dev);
1609         if (retval)
1610                 return retval;
1611
1612         retval = rt2500usb_init_eeprom(rt2x00dev);
1613         if (retval)
1614                 return retval;
1615
1616         /*
1617          * Initialize hw specifications.
1618          */
1619         rt2500usb_probe_hw_mode(rt2x00dev);
1620
1621         /*
1622          * USB devices require scheduled packet filter toggling
1623          *This device requires the beacon ring
1624          */
1625         __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
1626         __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
1627
1628         /*
1629          * Set the rssi offset.
1630          */
1631         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1632
1633         return 0;
1634 }
1635
1636 /*
1637  * IEEE80211 stack callback functions.
1638  */
1639 static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
1640                                    struct sk_buff *skb,
1641                                    struct ieee80211_tx_control *control)
1642 {
1643         struct rt2x00_dev *rt2x00dev = hw->priv;
1644         struct usb_device *usb_dev =
1645             interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
1646         struct data_ring *ring =
1647             rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1648         struct data_entry *beacon;
1649         struct data_entry *guardian;
1650         int length;
1651
1652         /*
1653          * Just in case the ieee80211 doesn't set this,
1654          * but we need this queue set for the descriptor
1655          * initialization.
1656          */
1657         control->queue = IEEE80211_TX_QUEUE_BEACON;
1658
1659         /*
1660          * Obtain 2 entries, one for the guardian byte,
1661          * the second for the actual beacon.
1662          */
1663         guardian = rt2x00_get_data_entry(ring);
1664         rt2x00_ring_index_inc(ring);
1665         beacon = rt2x00_get_data_entry(ring);
1666
1667         /*
1668          * First we create the beacon.
1669          */
1670         skb_push(skb, ring->desc_size);
1671         rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
1672                                 (struct ieee80211_hdr *)(skb->data +
1673                                                          ring->desc_size),
1674                                 skb->len - ring->desc_size, control);
1675
1676         /*
1677          * Length passed to usb_fill_urb cannot be an odd number,
1678          * so add 1 byte to make it even.
1679          */
1680         length = skb->len;
1681         if (length % 2)
1682                 length++;
1683
1684         usb_fill_bulk_urb(beacon->priv, usb_dev,
1685                           usb_sndbulkpipe(usb_dev, 1),
1686                           skb->data, length, rt2500usb_beacondone, beacon);
1687
1688         beacon->skb = skb;
1689
1690         /*
1691          * Second we need to create the guardian byte.
1692          * We only need a single byte, so lets recycle
1693          * the 'flags' field we are not using for beacons.
1694          */
1695         guardian->flags = 0;
1696         usb_fill_bulk_urb(guardian->priv, usb_dev,
1697                           usb_sndbulkpipe(usb_dev, 1),
1698                           &guardian->flags, 1, rt2500usb_beacondone, guardian);
1699
1700         /*
1701          * Send out the guardian byte.
1702          */
1703         usb_submit_urb(guardian->priv, GFP_ATOMIC);
1704
1705         /*
1706          * Enable beacon generation.
1707          */
1708         rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1709
1710         return 0;
1711 }
1712
1713 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1714         .tx                     = rt2x00mac_tx,
1715         .add_interface          = rt2x00mac_add_interface,
1716         .remove_interface       = rt2x00mac_remove_interface,
1717         .config                 = rt2x00mac_config,
1718         .config_interface       = rt2x00mac_config_interface,
1719         .set_multicast_list     = rt2x00mac_set_multicast_list,
1720         .get_stats              = rt2x00mac_get_stats,
1721         .conf_tx                = rt2x00mac_conf_tx,
1722         .get_tx_stats           = rt2x00mac_get_tx_stats,
1723         .beacon_update          = rt2500usb_beacon_update,
1724 };
1725
1726 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1727         .probe_hw               = rt2500usb_probe_hw,
1728         .initialize             = rt2x00usb_initialize,
1729         .uninitialize           = rt2x00usb_uninitialize,
1730         .set_device_state       = rt2500usb_set_device_state,
1731         .link_stats             = rt2500usb_link_stats,
1732         .reset_tuner            = rt2500usb_reset_tuner,
1733         .link_tuner             = rt2500usb_link_tuner,
1734         .write_tx_desc          = rt2500usb_write_tx_desc,
1735         .write_tx_data          = rt2x00usb_write_tx_data,
1736         .kick_tx_queue          = rt2500usb_kick_tx_queue,
1737         .fill_rxdone            = rt2500usb_fill_rxdone,
1738         .config_mac_addr        = rt2500usb_config_mac_addr,
1739         .config_bssid           = rt2500usb_config_bssid,
1740         .config_packet_filter   = rt2500usb_config_packet_filter,
1741         .config_type            = rt2500usb_config_type,
1742         .config                 = rt2500usb_config,
1743 };
1744
1745 static const struct rt2x00_ops rt2500usb_ops = {
1746         .name           = DRV_NAME,
1747         .rxd_size       = RXD_DESC_SIZE,
1748         .txd_size       = TXD_DESC_SIZE,
1749         .eeprom_size    = EEPROM_SIZE,
1750         .rf_size        = RF_SIZE,
1751         .lib            = &rt2500usb_rt2x00_ops,
1752         .hw             = &rt2500usb_mac80211_ops,
1753 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1754         .debugfs        = &rt2500usb_rt2x00debug,
1755 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1756 };
1757
1758 /*
1759  * rt2500usb module information.
1760  */
1761 static struct usb_device_id rt2500usb_device_table[] = {
1762         /* ASUS */
1763         { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1764         { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1765         /* Belkin */
1766         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1767         { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1768         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1769         /* Cisco Systems */
1770         { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1771         { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1772         { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1773         /* Conceptronic */
1774         { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1775         /* D-LINK */
1776         { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1777         /* Gigabyte */
1778         { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1779         { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1780         /* Hercules */
1781         { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1782         /* Melco */
1783         { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1784         { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1785         { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1786         { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1787
1788         /* MSI */
1789         { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1790         { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1791         { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1792         /* Ralink */
1793         { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1794         { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1795         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1796         { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1797         /* Siemens */
1798         { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1799         /* SMC */
1800         { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1801         /* Spairon */
1802         { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1803         /* Trust */
1804         { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1805         /* Zinwell */
1806         { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1807         { 0, }
1808 };
1809
1810 MODULE_AUTHOR(DRV_PROJECT);
1811 MODULE_VERSION(DRV_VERSION);
1812 MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1813 MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1814 MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1815 MODULE_LICENSE("GPL");
1816
1817 static struct usb_driver rt2500usb_driver = {
1818         .name           = DRV_NAME,
1819         .id_table       = rt2500usb_device_table,
1820         .probe          = rt2x00usb_probe,
1821         .disconnect     = rt2x00usb_disconnect,
1822         .suspend        = rt2x00usb_suspend,
1823         .resume         = rt2x00usb_resume,
1824 };
1825
1826 static int __init rt2500usb_init(void)
1827 {
1828         return usb_register(&rt2500usb_driver);
1829 }
1830
1831 static void __exit rt2500usb_exit(void)
1832 {
1833         usb_deregister(&rt2500usb_driver);
1834 }
1835
1836 module_init(rt2500usb_init);
1837 module_exit(rt2500usb_exit);