SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500pci.c

   1 /*
   2         Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500pci
  23         Abstract: rt2500pci device specific routines.
  24         Supported chipsets: RT2560.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/eeprom_93cx6.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00pci.h"
  37 #include "rt2500pci.h"
  38
  39 /*
  40  * Register access.
  41  * All access to the CSR registers will go through the methods
  42  * rt2x00pci_register_read and rt2x00pci_register_write.
  43  * BBP and RF register require indirect register access,
  44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  45  * These indirect registers work with busy bits,
  46  * and we will try maximal REGISTER_BUSY_COUNT times to access
  47  * the register while taking a REGISTER_BUSY_DELAY us delay
  48  * between each attampt. When the busy bit is still set at that time,
  49  * the access attempt is considered to have failed,
  50  * and we will print an error.
  51  */
  52 #define WAIT_FOR_BBP(__dev, __reg) \
  53         rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg))
  54 #define WAIT_FOR_RF(__dev, __reg) \
  55         rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg))
  56
  57 static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  58                                 const unsigned int word, const u8 value)
  59 {
  60         u32 reg;
  61
  62         mutex_lock(&rt2x00dev->csr_mutex);
  63
  64         /*
  65          * Wait until the BBP becomes available, afterwards we
  66          * can safely write the new data into the register.
  67          */
  68         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  69                 reg = 0;
  70                 rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
  71                 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  72                 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  73                 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
  74
  75                 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  76         }
  77
  78         mutex_unlock(&rt2x00dev->csr_mutex);
  79 }
  80
  81 static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  82                                const unsigned int word, u8 *value)
  83 {
  84         u32 reg;
  85
  86         mutex_lock(&rt2x00dev->csr_mutex);
  87
  88         /*
  89          * Wait until the BBP becomes available, afterwards we
  90          * can safely write the read request into the register.
  91          * After the data has been written, we wait until hardware
  92          * returns the correct value, if at any time the register
  93          * doesn't become available in time, reg will be 0xffffffff
  94          * which means we return 0xff to the caller.
  95          */
  96         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  97                 reg = 0;
  98                 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  99                 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
 100                 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
 101
 102                 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 103
 104                 WAIT_FOR_BBP(rt2x00dev, &reg);
 105         }
 106
 107         *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 108
 109         mutex_unlock(&rt2x00dev->csr_mutex);
 110 }
 111
 112 static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
 113                                const unsigned int word, const u32 value)
 114 {
 115         u32 reg;
 116
 117         mutex_lock(&rt2x00dev->csr_mutex);
 118
 119         /*
 120          * Wait until the RF becomes available, afterwards we
 121          * can safely write the new data into the register.
 122          */
 123         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 124                 reg = 0;
 125                 rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 126                 rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
 127                 rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
 128                 rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
 129
 130                 rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 131                 rt2x00_rf_write(rt2x00dev, word, value);
 132         }
 133
 134         mutex_unlock(&rt2x00dev->csr_mutex);
 135 }
 136
 137 static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 138 {
 139         struct rt2x00_dev *rt2x00dev = eeprom->data;
 140         u32 reg;
 141
 142         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
 143
 144         eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
 145         eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
 146         eeprom->reg_data_clock =
 147             !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
 148         eeprom->reg_chip_select =
 149             !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
 150 }
 151
 152 static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 153 {
 154         struct rt2x00_dev *rt2x00dev = eeprom->data;
 155         u32 reg = 0;
 156
 157         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
 158         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
 159         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
 160                            !!eeprom->reg_data_clock);
 161         rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
 162                            !!eeprom->reg_chip_select);
 163
 164         rt2x00pci_register_write(rt2x00dev, CSR21, reg);
 165 }
 166
 167 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 168 static const struct rt2x00debug rt2500pci_rt2x00debug = {
 169         .owner  = THIS_MODULE,
 170         .csr    = {
 171                 .read           = rt2x00pci_register_read,
 172                 .write          = rt2x00pci_register_write,
 173                 .flags          = RT2X00DEBUGFS_OFFSET,
 174                 .word_base      = CSR_REG_BASE,
 175                 .word_size      = sizeof(u32),
 176                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 177         },
 178         .eeprom = {
 179                 .read           = rt2x00_eeprom_read,
 180                 .write          = rt2x00_eeprom_write,
 181                 .word_base      = EEPROM_BASE,
 182                 .word_size      = sizeof(u16),
 183                 .word_count     = EEPROM_SIZE / sizeof(u16),
 184         },
 185         .bbp    = {
 186                 .read           = rt2500pci_bbp_read,
 187                 .write          = rt2500pci_bbp_write,
 188                 .word_base      = BBP_BASE,
 189                 .word_size      = sizeof(u8),
 190                 .word_count     = BBP_SIZE / sizeof(u8),
 191         },
 192         .rf     = {
 193                 .read           = rt2x00_rf_read,
 194                 .write          = rt2500pci_rf_write,
 195                 .word_base      = RF_BASE,
 196                 .word_size      = sizeof(u32),
 197                 .word_count     = RF_SIZE / sizeof(u32),
 198         },
 199 };
 200 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 201
 202 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 203 {
 204         u32 reg;
 205
 206         rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 207         return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 208 }
 209
 210 #ifdef CONFIG_RT2X00_LIB_LEDS
 211 static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
 212                                      enum led_brightness brightness)
 213 {
 214         struct rt2x00_led *led =
 215             container_of(led_cdev, struct rt2x00_led, led_dev);
 216         unsigned int enabled = brightness != LED_OFF;
 217         u32 reg;
 218
 219         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 220
 221         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 222                 rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
 223         else if (led->type == LED_TYPE_ACTIVITY)
 224                 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled);
 225
 226         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 227 }
 228
 229 static int rt2500pci_blink_set(struct led_classdev *led_cdev,
 230                                unsigned long *delay_on,
 231                                unsigned long *delay_off)
 232 {
 233         struct rt2x00_led *led =
 234             container_of(led_cdev, struct rt2x00_led, led_dev);
 235         u32 reg;
 236
 237         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 238         rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, *delay_on);
 239         rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, *delay_off);
 240         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 241
 242         return 0;
 243 }
 244
 245 static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev,
 246                                struct rt2x00_led *led,
 247                                enum led_type type)
 248 {
 249         led->rt2x00dev = rt2x00dev;
 250         led->type = type;
 251         led->led_dev.brightness_set = rt2500pci_brightness_set;
 252         led->led_dev.blink_set = rt2500pci_blink_set;
 253         led->flags = LED_INITIALIZED;
 254 }
 255 #endif /* CONFIG_RT2X00_LIB_LEDS */
 256
 257 /*
 258  * Configuration handlers.
 259  */
 260 static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev,
 261                                     const unsigned int filter_flags)
 262 {
 263         u32 reg;
 264
 265         /*
 266          * Start configuration steps.
 267          * Note that the version error will always be dropped
 268          * and broadcast frames will always be accepted since
 269          * there is no filter for it at this time.
 270          */
 271         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
 272         rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
 273                            !(filter_flags & FIF_FCSFAIL));
 274         rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
 275                            !(filter_flags & FIF_PLCPFAIL));
 276         rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
 277                            !(filter_flags & FIF_CONTROL));
 278         rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
 279                            !(filter_flags & FIF_PROMISC_IN_BSS));
 280         rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
 281                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 282                            !rt2x00dev->intf_ap_count);
 283         rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
 284         rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
 285                            !(filter_flags & FIF_ALLMULTI));
 286         rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
 287         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
 288 }
 289
 290 static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
 291                                   struct rt2x00_intf *intf,
 292                                   struct rt2x00intf_conf *conf,
 293                                   const unsigned int flags)
 294 {
 295         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON);
 296         unsigned int bcn_preload;
 297         u32 reg;
 298
 299         if (flags & CONFIG_UPDATE_TYPE) {
 300                 /*
 301                  * Enable beacon config
 302                  */
 303                 bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
 304                 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
 305                 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
 306                 rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN, queue->cw_min);
 307                 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
 308
 309                 /*
 310                  * Enable synchronisation.
 311                  */
 312                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 313                 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
 314                 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
 315                 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
 316                 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 317         }
 318
 319         if (flags & CONFIG_UPDATE_MAC)
 320                 rt2x00pci_register_multiwrite(rt2x00dev, CSR3,
 321                                               conf->mac, sizeof(conf->mac));
 322
 323         if (flags & CONFIG_UPDATE_BSSID)
 324                 rt2x00pci_register_multiwrite(rt2x00dev, CSR5,
 325                                               conf->bssid, sizeof(conf->bssid));
 326 }
 327
 328 static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 329                                  struct rt2x00lib_erp *erp)
 330 {
 331         int preamble_mask;
 332         u32 reg;
 333
 334         /*
 335          * When short preamble is enabled, we should set bit 0x08
 336          */
 337         preamble_mask = erp->short_preamble << 3;
 338
 339         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 340         rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, 0x162);
 341         rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, 0xa2);
 342         rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 343         rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 344         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 345
 346         rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
 347         rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00);
 348         rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
 349         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 10));
 350         rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
 351
 352         rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
 353         rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
 354         rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
 355         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 20));
 356         rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
 357
 358         rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
 359         rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
 360         rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
 361         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 55));
 362         rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
 363
 364         rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
 365         rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
 366         rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
 367         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 110));
 368         rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
 369
 370         rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates);
 371
 372         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 373         rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
 374         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 375
 376         rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
 377         rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, erp->beacon_int * 16);
 378         rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16);
 379         rt2x00pci_register_write(rt2x00dev, CSR12, reg);
 380
 381         rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 382         rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
 383         rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
 384         rt2x00pci_register_write(rt2x00dev, CSR18, reg);
 385
 386         rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
 387         rt2x00_set_field32(&reg, CSR19_DIFS, erp->difs);
 388         rt2x00_set_field32(&reg, CSR19_EIFS, erp->eifs);
 389         rt2x00pci_register_write(rt2x00dev, CSR19, reg);
 390 }
 391
 392 static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
 393                                  struct antenna_setup *ant)
 394 {
 395         u32 reg;
 396         u8 r14;
 397         u8 r2;
 398
 399         /*
 400          * We should never come here because rt2x00lib is supposed
 401          * to catch this and send us the correct antenna explicitely.
 402          */
 403         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 404                ant->tx == ANTENNA_SW_DIVERSITY);
 405
 406         rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
 407         rt2500pci_bbp_read(rt2x00dev, 14, &r14);
 408         rt2500pci_bbp_read(rt2x00dev, 2, &r2);
 409
 410         /*
 411          * Configure the TX antenna.
 412          */
 413         switch (ant->tx) {
 414         case ANTENNA_A:
 415                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 416                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
 417                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
 418                 break;
 419         case ANTENNA_B:
 420         default:
 421                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 422                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
 423                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
 424                 break;
 425         }
 426
 427         /*
 428          * Configure the RX antenna.
 429          */
 430         switch (ant->rx) {
 431         case ANTENNA_A:
 432                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 433                 break;
 434         case ANTENNA_B:
 435         default:
 436                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 437                 break;
 438         }
 439
 440         /*
 441          * RT2525E and RT5222 need to flip TX I/Q
 442          */
 443         if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
 444                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 445                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
 446                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
 447
 448                 /*
 449                  * RT2525E does not need RX I/Q Flip.
 450                  */
 451                 if (rt2x00_rf(rt2x00dev, RF2525E))
 452                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 453         } else {
 454                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
 455                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
 456         }
 457
 458         rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
 459         rt2500pci_bbp_write(rt2x00dev, 14, r14);
 460         rt2500pci_bbp_write(rt2x00dev, 2, r2);
 461 }
 462
 463 static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
 464                                      struct rf_channel *rf, const int txpower)
 465 {
 466         u8 r70;
 467
 468         /*
 469          * Set TXpower.
 470          */
 471         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 472
 473         /*
 474          * Switch on tuning bits.
 475          * For RT2523 devices we do not need to update the R1 register.
 476          */
 477         if (!rt2x00_rf(rt2x00dev, RF2523))
 478                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
 479         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 480
 481         /*
 482          * For RT2525 we should first set the channel to half band higher.
 483          */
 484         if (rt2x00_rf(rt2x00dev, RF2525)) {
 485                 static const u32 vals[] = {
 486                         0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
 487                         0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
 488                         0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
 489                         0x00080d2e, 0x00080d3a
 490                 };
 491
 492                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 493                 rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 494                 rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 495                 if (rf->rf4)
 496                         rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 497         }
 498
 499         rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 500         rt2500pci_rf_write(rt2x00dev, 2, rf->rf2);
 501         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 502         if (rf->rf4)
 503                 rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 504
 505         /*
 506          * Channel 14 requires the Japan filter bit to be set.
 507          */
 508         r70 = 0x46;
 509         rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14);
 510         rt2500pci_bbp_write(rt2x00dev, 70, r70);
 511
 512         msleep(1);
 513
 514         /*
 515          * Switch off tuning bits.
 516          * For RT2523 devices we do not need to update the R1 register.
 517          */
 518         if (!rt2x00_rf(rt2x00dev, RF2523)) {
 519                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
 520                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 521         }
 522
 523         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
 524         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 525
 526         /*
 527          * Clear false CRC during channel switch.
 528          */
 529         rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
 530 }
 531
 532 static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 533                                      const int txpower)
 534 {
 535         u32 rf3;
 536
 537         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 538         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 539         rt2500pci_rf_write(rt2x00dev, 3, rf3);
 540 }
 541
 542 static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 543                                          struct rt2x00lib_conf *libconf)
 544 {
 545         u32 reg;
 546
 547         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 548         rt2x00_set_field32(&reg, CSR11_LONG_RETRY,
 549                            libconf->conf->long_frame_max_tx_count);
 550         rt2x00_set_field32(&reg, CSR11_SHORT_RETRY,
 551                            libconf->conf->short_frame_max_tx_count);
 552         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 553 }
 554
 555 static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
 556                                 struct rt2x00lib_conf *libconf)
 557 {
 558         enum dev_state state =
 559             (libconf->conf->flags & IEEE80211_CONF_PS) ?
 560                 STATE_SLEEP : STATE_AWAKE;
 561         u32 reg;
 562
 563         if (state == STATE_SLEEP) {
 564                 rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 565                 rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
 566                                    (rt2x00dev->beacon_int - 20) * 16);
 567                 rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
 568                                    libconf->conf->listen_interval - 1);
 569
 570                 /* We must first disable autowake before it can be enabled */
 571                 rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 0);
 572                 rt2x00pci_register_write(rt2x00dev, CSR20, reg);
 573
 574                 rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 1);
 575                 rt2x00pci_register_write(rt2x00dev, CSR20, reg);
 576         } else {
 577                 rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 578                 rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 0);
 579                 rt2x00pci_register_write(rt2x00dev, CSR20, reg);
 580         }
 581
 582         rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
 583 }
 584
 585 static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
 586                              struct rt2x00lib_conf *libconf,
 587                              const unsigned int flags)
 588 {
 589         if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
 590                 rt2500pci_config_channel(rt2x00dev, &libconf->rf,
 591                                          libconf->conf->power_level);
 592         if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
 593             !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 594                 rt2500pci_config_txpower(rt2x00dev,
 595                                          libconf->conf->power_level);
 596         if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 597                 rt2500pci_config_retry_limit(rt2x00dev, libconf);
 598         if (flags & IEEE80211_CONF_CHANGE_PS)
 599                 rt2500pci_config_ps(rt2x00dev, libconf);
 600 }
 601
 602 /*
 603  * Link tuning
 604  */
 605 static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev,
 606                                  struct link_qual *qual)
 607 {
 608         u32 reg;
 609
 610         /*
 611          * Update FCS error count from register.
 612          */
 613         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 614         qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
 615
 616         /*
 617          * Update False CCA count from register.
 618          */
 619         rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
 620         qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
 621 }
 622
 623 static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev,
 624                                      struct link_qual *qual, u8 vgc_level)
 625 {
 626         if (qual->vgc_level_reg != vgc_level) {
 627                 rt2500pci_bbp_write(rt2x00dev, 17, vgc_level);
 628                 qual->vgc_level_reg = vgc_level;
 629         }
 630 }
 631
 632 static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
 633                                   struct link_qual *qual)
 634 {
 635         rt2500pci_set_vgc(rt2x00dev, qual, 0x48);
 636 }
 637
 638 static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 639                                  struct link_qual *qual, const u32 count)
 640 {
 641         /*
 642          * To prevent collisions with MAC ASIC on chipsets
 643          * up to version C the link tuning should halt after 20
 644          * seconds while being associated.
 645          */
 646         if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D &&
 647             rt2x00dev->intf_associated && count > 20)
 648                 return;
 649
 650         /*
 651          * Chipset versions C and lower should directly continue
 652          * to the dynamic CCA tuning. Chipset version D and higher
 653          * should go straight to dynamic CCA tuning when they
 654          * are not associated.
 655          */
 656         if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D ||
 657             !rt2x00dev->intf_associated)
 658                 goto dynamic_cca_tune;
 659
 660         /*
 661          * A too low RSSI will cause too much false CCA which will
 662          * then corrupt the R17 tuning. To remidy this the tuning should
 663          * be stopped (While making sure the R17 value will not exceed limits)
 664          */
 665         if (qual->rssi < -80 && count > 20) {
 666                 if (qual->vgc_level_reg >= 0x41)
 667                         rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level);
 668                 return;
 669         }
 670
 671         /*
 672          * Special big-R17 for short distance
 673          */
 674         if (qual->rssi >= -58) {
 675                 rt2500pci_set_vgc(rt2x00dev, qual, 0x50);
 676                 return;
 677         }
 678
 679         /*
 680          * Special mid-R17 for middle distance
 681          */
 682         if (qual->rssi >= -74) {
 683                 rt2500pci_set_vgc(rt2x00dev, qual, 0x41);
 684                 return;
 685         }
 686
 687         /*
 688          * Leave short or middle distance condition, restore r17
 689          * to the dynamic tuning range.
 690          */
 691         if (qual->vgc_level_reg >= 0x41) {
 692                 rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level);
 693                 return;
 694         }
 695
 696 dynamic_cca_tune:
 697
 698         /*
 699          * R17 is inside the dynamic tuning range,
 700          * start tuning the link based on the false cca counter.
 701          */
 702         if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) {
 703                 rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg);
 704                 qual->vgc_level = qual->vgc_level_reg;
 705         } else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) {
 706                 rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg);
 707                 qual->vgc_level = qual->vgc_level_reg;
 708         }
 709 }
 710
 711 /*
 712  * Initialization functions.
 713  */
 714 static bool rt2500pci_get_entry_state(struct queue_entry *entry)
 715 {
 716         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 717         u32 word;
 718
 719         if (entry->queue->qid == QID_RX) {
 720                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 721
 722                 return rt2x00_get_field32(word, RXD_W0_OWNER_NIC);
 723         } else {
 724                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 725
 726                 return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
 727                         rt2x00_get_field32(word, TXD_W0_VALID));
 728         }
 729 }
 730
 731 static void rt2500pci_clear_entry(struct queue_entry *entry)
 732 {
 733         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 734         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 735         u32 word;
 736
 737         if (entry->queue->qid == QID_RX) {
 738                 rt2x00_desc_read(entry_priv->desc, 1, &word);
 739                 rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 740                 rt2x00_desc_write(entry_priv->desc, 1, word);
 741
 742                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 743                 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
 744                 rt2x00_desc_write(entry_priv->desc, 0, word);
 745         } else {
 746                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 747                 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
 748                 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
 749                 rt2x00_desc_write(entry_priv->desc, 0, word);
 750         }
 751 }
 752
 753 static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
 754 {
 755         struct queue_entry_priv_pci *entry_priv;
 756         u32 reg;
 757
 758         /*
 759          * Initialize registers.
 760          */
 761         rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
 762         rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
 763         rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
 764         rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit);
 765         rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
 766         rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
 767
 768         entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
 769         rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
 770         rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
 771                            entry_priv->desc_dma);
 772         rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
 773
 774         entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
 775         rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
 776         rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
 777                            entry_priv->desc_dma);
 778         rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
 779
 780         entry_priv = rt2x00dev->bcn[1].entries[0].priv_data;
 781         rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
 782         rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
 783                            entry_priv->desc_dma);
 784         rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
 785
 786         entry_priv = rt2x00dev->bcn[0].entries[0].priv_data;
 787         rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
 788         rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
 789                            entry_priv->desc_dma);
 790         rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
 791
 792         rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
 793         rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
 794         rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
 795         rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
 796
 797         entry_priv = rt2x00dev->rx->entries[0].priv_data;
 798         rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
 799         rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
 800                            entry_priv->desc_dma);
 801         rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
 802
 803         return 0;
 804 }
 805
 806 static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
 807 {
 808         u32 reg;
 809
 810         rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
 811         rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
 812         rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
 813         rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
 814
 815         rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
 816         rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
 817         rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
 818         rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
 819         rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
 820
 821         rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
 822         rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
 823                            rt2x00dev->rx->data_size / 128);
 824         rt2x00pci_register_write(rt2x00dev, CSR9, reg);
 825
 826         /*
 827          * Always use CWmin and CWmax set in descriptor.
 828          */
 829         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 830         rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
 831         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 832
 833         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 834         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
 835         rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
 836         rt2x00_set_field32(&reg, CSR14_TBCN, 0);
 837         rt2x00_set_field32(&reg, CSR14_TCFP, 0);
 838         rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
 839         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
 840         rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
 841         rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
 842         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 843
 844         rt2x00pci_register_write(rt2x00dev, CNT3, 0);
 845
 846         rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
 847         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
 848         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
 849         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
 850         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
 851         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
 852         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
 853         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
 854         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
 855         rt2x00pci_register_write(rt2x00dev, TXCSR8, reg);
 856
 857         rt2x00pci_register_read(rt2x00dev, ARTCSR0, &reg);
 858         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
 859         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
 860         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
 861         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
 862         rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg);
 863
 864         rt2x00pci_register_read(rt2x00dev, ARTCSR1, &reg);
 865         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
 866         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
 867         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
 868         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
 869         rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg);
 870
 871         rt2x00pci_register_read(rt2x00dev, ARTCSR2, &reg);
 872         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
 873         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
 874         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
 875         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
 876         rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg);
 877
 878         rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
 879         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
 880         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
 881         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
 882         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
 883         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
 884         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
 885         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
 886         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
 887         rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
 888
 889         rt2x00pci_register_read(rt2x00dev, PCICSR, &reg);
 890         rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
 891         rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
 892         rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
 893         rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
 894         rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
 895         rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
 896         rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
 897         rt2x00pci_register_write(rt2x00dev, PCICSR, reg);
 898
 899         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
 900
 901         rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
 902         rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
 903
 904         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 905                 return -EBUSY;
 906
 907         rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
 908         rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
 909
 910         rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
 911         rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
 912         rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
 913
 914         rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
 915         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
 916         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
 917         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
 918         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
 919         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
 920         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
 921         rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
 922
 923         rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
 924
 925         rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
 926
 927         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 928         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
 929         rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
 930         rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
 931         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 932
 933         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 934         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
 935         rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
 936         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 937
 938         /*
 939          * We must clear the FCS and FIFO error count.
 940          * These registers are cleared on read,
 941          * so we may pass a useless variable to store the value.
 942          */
 943         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 944         rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
 945
 946         return 0;
 947 }
 948
 949 static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
 950 {
 951         unsigned int i;
 952         u8 value;
 953
 954         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 955                 rt2500pci_bbp_read(rt2x00dev, 0, &value);
 956                 if ((value != 0xff) && (value != 0x00))
 957                         return 0;
 958                 udelay(REGISTER_BUSY_DELAY);
 959         }
 960
 961         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 962         return -EACCES;
 963 }
 964
 965 static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 966 {
 967         unsigned int i;
 968         u16 eeprom;
 969         u8 reg_id;
 970         u8 value;
 971
 972         if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev)))
 973                 return -EACCES;
 974
 975         rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
 976         rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
 977         rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
 978         rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
 979         rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
 980         rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
 981         rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
 982         rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
 983         rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
 984         rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
 985         rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
 986         rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
 987         rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
 988         rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
 989         rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
 990         rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
 991         rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
 992         rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
 993         rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
 994         rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
 995         rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
 996         rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
 997         rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
 998         rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
 999         rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
1000         rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
1001         rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
1002         rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
1003         rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
1004         rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
1005
1006         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1007                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1008
1009                 if (eeprom != 0xffff && eeprom != 0x0000) {
1010                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1011                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1012                         rt2500pci_bbp_write(rt2x00dev, reg_id, value);
1013                 }
1014         }
1015
1016         return 0;
1017 }
1018
1019 /*
1020  * Device state switch handlers.
1021  */
1022 static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1023                                 enum dev_state state)
1024 {
1025         u32 reg;
1026
1027         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1028         rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
1029                            (state == STATE_RADIO_RX_OFF) ||
1030                            (state == STATE_RADIO_RX_OFF_LINK));
1031         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1032 }
1033
1034 static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1035                                  enum dev_state state)
1036 {
1037         int mask = (state == STATE_RADIO_IRQ_OFF);
1038         u32 reg;
1039
1040         /*
1041          * When interrupts are being enabled, the interrupt registers
1042          * should clear the register to assure a clean state.
1043          */
1044         if (state == STATE_RADIO_IRQ_ON) {
1045                 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1046                 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1047         }
1048
1049         /*
1050          * Only toggle the interrupts bits we are going to use.
1051          * Non-checked interrupt bits are disabled by default.
1052          */
1053         rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1054         rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
1055         rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
1056         rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
1057         rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
1058         rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
1059         rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1060 }
1061
1062 static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1063 {
1064         /*
1065          * Initialize all registers.
1066          */
1067         if (unlikely(rt2500pci_init_queues(rt2x00dev) ||
1068                      rt2500pci_init_registers(rt2x00dev) ||
1069                      rt2500pci_init_bbp(rt2x00dev)))
1070                 return -EIO;
1071
1072         return 0;
1073 }
1074
1075 static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1076 {
1077         /*
1078          * Disable power
1079          */
1080         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1081 }
1082
1083 static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
1084                                enum dev_state state)
1085 {
1086         u32 reg;
1087         unsigned int i;
1088         char put_to_sleep;
1089         char bbp_state;
1090         char rf_state;
1091
1092         put_to_sleep = (state != STATE_AWAKE);
1093
1094         rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1095         rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1096         rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1097         rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1098         rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1099         rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1100
1101         /*
1102          * Device is not guaranteed to be in the requested state yet.
1103          * We must wait until the register indicates that the
1104          * device has entered the correct state.
1105          */
1106         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1107                 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1108                 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1109                 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1110                 if (bbp_state == state && rf_state == state)
1111                         return 0;
1112                 msleep(10);
1113         }
1114
1115         return -EBUSY;
1116 }
1117
1118 static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1119                                       enum dev_state state)
1120 {
1121         int retval = 0;
1122
1123         switch (state) {
1124         case STATE_RADIO_ON:
1125                 retval = rt2500pci_enable_radio(rt2x00dev);
1126                 break;
1127         case STATE_RADIO_OFF:
1128                 rt2500pci_disable_radio(rt2x00dev);
1129                 break;
1130         case STATE_RADIO_RX_ON:
1131         case STATE_RADIO_RX_ON_LINK:
1132         case STATE_RADIO_RX_OFF:
1133         case STATE_RADIO_RX_OFF_LINK:
1134                 rt2500pci_toggle_rx(rt2x00dev, state);
1135                 break;
1136         case STATE_RADIO_IRQ_ON:
1137         case STATE_RADIO_IRQ_OFF:
1138                 rt2500pci_toggle_irq(rt2x00dev, state);
1139                 break;
1140         case STATE_DEEP_SLEEP:
1141         case STATE_SLEEP:
1142         case STATE_STANDBY:
1143         case STATE_AWAKE:
1144                 retval = rt2500pci_set_state(rt2x00dev, state);
1145                 break;
1146         default:
1147                 retval = -ENOTSUPP;
1148                 break;
1149         }
1150
1151         if (unlikely(retval))
1152                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1153                       state, retval);
1154
1155         return retval;
1156 }
1157
1158 /*
1159  * TX descriptor initialization
1160  */
1161 static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1162                                     struct sk_buff *skb,
1163                                     struct txentry_desc *txdesc)
1164 {
1165         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1166         struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
1167         __le32 *txd = skbdesc->desc;
1168         u32 word;
1169
1170         /*
1171          * Start writing the descriptor words.
1172          */
1173         rt2x00_desc_read(entry_priv->desc, 1, &word);
1174         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
1175         rt2x00_desc_write(entry_priv->desc, 1, word);
1176
1177         rt2x00_desc_read(txd, 2, &word);
1178         rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
1179         rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs);
1180         rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min);
1181         rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max);
1182         rt2x00_desc_write(txd, 2, word);
1183
1184         rt2x00_desc_read(txd, 3, &word);
1185         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal);
1186         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service);
1187         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, txdesc->length_low);
1188         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, txdesc->length_high);
1189         rt2x00_desc_write(txd, 3, word);
1190
1191         rt2x00_desc_read(txd, 10, &word);
1192         rt2x00_set_field32(&word, TXD_W10_RTS,
1193                            test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
1194         rt2x00_desc_write(txd, 10, word);
1195
1196         rt2x00_desc_read(txd, 0, &word);
1197         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1198         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1199         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1200                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1201         rt2x00_set_field32(&word, TXD_W0_ACK,
1202                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1203         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1204                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1205         rt2x00_set_field32(&word, TXD_W0_OFDM,
1206                            (txdesc->rate_mode == RATE_MODE_OFDM));
1207         rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
1208         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1209         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1210                            test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
1211         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
1212         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1213         rt2x00_desc_write(txd, 0, word);
1214 }
1215
1216 /*
1217  * TX data initialization
1218  */
1219 static void rt2500pci_write_beacon(struct queue_entry *entry)
1220 {
1221         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1222         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1223         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1224         u32 word;
1225         u32 reg;
1226
1227         /*
1228          * Disable beaconing while we are reloading the beacon data,
1229          * otherwise we might be sending out invalid data.
1230          */
1231         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1232         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
1233         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1234
1235         /*
1236          * Replace rt2x00lib allocated descriptor with the
1237          * pointer to the _real_ hardware descriptor.
1238          * After that, map the beacon to DMA and update the
1239          * descriptor.
1240          */
1241         memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
1242         skbdesc->desc = entry_priv->desc;
1243
1244         rt2x00queue_map_txskb(rt2x00dev, entry->skb);
1245
1246         rt2x00_desc_read(entry_priv->desc, 1, &word);
1247         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
1248         rt2x00_desc_write(entry_priv->desc, 1, word);
1249
1250         /*
1251          * Enable beaconing again.
1252          */
1253         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
1254         rt2x00_set_field32(&reg, CSR14_TBCN, 1);
1255         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1256         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1257 }
1258
1259 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1260                                     const enum data_queue_qid queue)
1261 {
1262         u32 reg;
1263
1264         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1265         rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
1266         rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue == QID_AC_BK));
1267         rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, (queue == QID_ATIM));
1268         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1269 }
1270
1271 static void rt2500pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
1272                                     const enum data_queue_qid qid)
1273 {
1274         u32 reg;
1275
1276         if (qid == QID_BEACON) {
1277                 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1278         } else {
1279                 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1280                 rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1281                 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1282         }
1283 }
1284
1285 /*
1286  * RX control handlers
1287  */
1288 static void rt2500pci_fill_rxdone(struct queue_entry *entry,
1289                                   struct rxdone_entry_desc *rxdesc)
1290 {
1291         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1292         u32 word0;
1293         u32 word2;
1294
1295         rt2x00_desc_read(entry_priv->desc, 0, &word0);
1296         rt2x00_desc_read(entry_priv->desc, 2, &word2);
1297
1298         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1299                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1300         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1301                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1302
1303         /*
1304          * Obtain the status about this packet.
1305          * When frame was received with an OFDM bitrate,
1306          * the signal is the PLCP value. If it was received with
1307          * a CCK bitrate the signal is the rate in 100kbit/s.
1308          */
1309         rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1310         rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1311             entry->queue->rt2x00dev->rssi_offset;
1312         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1313
1314         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1315                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1316         else
1317                 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
1318         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1319                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1320 }
1321
1322 /*
1323  * Interrupt functions.
1324  */
1325 static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
1326                              const enum data_queue_qid queue_idx)
1327 {
1328         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
1329         struct queue_entry_priv_pci *entry_priv;
1330         struct queue_entry *entry;
1331         struct txdone_entry_desc txdesc;
1332         u32 word;
1333
1334         while (!rt2x00queue_empty(queue)) {
1335                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1336                 entry_priv = entry->priv_data;
1337                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1338
1339                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1340                     !rt2x00_get_field32(word, TXD_W0_VALID))
1341                         break;
1342
1343                 /*
1344                  * Obtain the status about this packet.
1345                  */
1346                 txdesc.flags = 0;
1347                 switch (rt2x00_get_field32(word, TXD_W0_RESULT)) {
1348                 case 0: /* Success */
1349                 case 1: /* Success with retry */
1350                         __set_bit(TXDONE_SUCCESS, &txdesc.flags);
1351                         break;
1352                 case 2: /* Failure, excessive retries */
1353                         __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
1354                         /* Don't break, this is a failed frame! */
1355                 default: /* Failure */
1356                         __set_bit(TXDONE_FAILURE, &txdesc.flags);
1357                 }
1358                 txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1359
1360                 rt2x00lib_txdone(entry, &txdesc);
1361         }
1362 }
1363
1364 static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
1365 {
1366         struct rt2x00_dev *rt2x00dev = dev_instance;
1367         u32 reg;
1368
1369         /*
1370          * Get the interrupt sources & saved to local variable.
1371          * Write register value back to clear pending interrupts.
1372          */
1373         rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1374         rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1375
1376         if (!reg)
1377                 return IRQ_NONE;
1378
1379         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
1380                 return IRQ_HANDLED;
1381
1382         /*
1383          * Handle interrupts, walk through all bits
1384          * and run the tasks, the bits are checked in order of
1385          * priority.
1386          */
1387
1388         /*
1389          * 1 - Beacon timer expired interrupt.
1390          */
1391         if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1392                 rt2x00lib_beacondone(rt2x00dev);
1393
1394         /*
1395          * 2 - Rx ring done interrupt.
1396          */
1397         if (rt2x00_get_field32(reg, CSR7_RXDONE))
1398                 rt2x00pci_rxdone(rt2x00dev);
1399
1400         /*
1401          * 3 - Atim ring transmit done interrupt.
1402          */
1403         if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1404                 rt2500pci_txdone(rt2x00dev, QID_ATIM);
1405
1406         /*
1407          * 4 - Priority ring transmit done interrupt.
1408          */
1409         if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1410                 rt2500pci_txdone(rt2x00dev, QID_AC_BE);
1411
1412         /*
1413          * 5 - Tx ring transmit done interrupt.
1414          */
1415         if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1416                 rt2500pci_txdone(rt2x00dev, QID_AC_BK);
1417
1418         return IRQ_HANDLED;
1419 }
1420
1421 /*
1422  * Device probe functions.
1423  */
1424 static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1425 {
1426         struct eeprom_93cx6 eeprom;
1427         u32 reg;
1428         u16 word;
1429         u8 *mac;
1430
1431         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1432
1433         eeprom.data = rt2x00dev;
1434         eeprom.register_read = rt2500pci_eepromregister_read;
1435         eeprom.register_write = rt2500pci_eepromregister_write;
1436         eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1437             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1438         eeprom.reg_data_in = 0;
1439         eeprom.reg_data_out = 0;
1440         eeprom.reg_data_clock = 0;
1441         eeprom.reg_chip_select = 0;
1442
1443         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1444                                EEPROM_SIZE / sizeof(u16));
1445
1446         /*
1447          * Start validation of the data that has been read.
1448          */
1449         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1450         if (!is_valid_ether_addr(mac)) {
1451                 random_ether_addr(mac);
1452                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
1453         }
1454
1455         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1456         if (word == 0xffff) {
1457                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1458                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1459                                    ANTENNA_SW_DIVERSITY);
1460                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1461                                    ANTENNA_SW_DIVERSITY);
1462                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1463                                    LED_MODE_DEFAULT);
1464                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1465                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1466                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1467                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1468                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1469         }
1470
1471         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1472         if (word == 0xffff) {
1473                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1474                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1475                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1476                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1477                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1478         }
1479
1480         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1481         if (word == 0xffff) {
1482                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1483                                    DEFAULT_RSSI_OFFSET);
1484                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1485                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1486         }
1487
1488         return 0;
1489 }
1490
1491 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1492 {
1493         u32 reg;
1494         u16 value;
1495         u16 eeprom;
1496
1497         /*
1498          * Read EEPROM word for configuration.
1499          */
1500         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1501
1502         /*
1503          * Identify RF chipset.
1504          */
1505         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1506         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1507         rt2x00_set_chip(rt2x00dev, RT2560, value,
1508                         rt2x00_get_field32(reg, CSR0_REVISION));
1509
1510         if (!rt2x00_rf(rt2x00dev, RF2522) &&
1511             !rt2x00_rf(rt2x00dev, RF2523) &&
1512             !rt2x00_rf(rt2x00dev, RF2524) &&
1513             !rt2x00_rf(rt2x00dev, RF2525) &&
1514             !rt2x00_rf(rt2x00dev, RF2525E) &&
1515             !rt2x00_rf(rt2x00dev, RF5222)) {
1516                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1517                 return -ENODEV;
1518         }
1519
1520         /*
1521          * Identify default antenna configuration.
1522          */
1523         rt2x00dev->default_ant.tx =
1524             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1525         rt2x00dev->default_ant.rx =
1526             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1527
1528         /*
1529          * Store led mode, for correct led behaviour.
1530          */
1531 #ifdef CONFIG_RT2X00_LIB_LEDS
1532         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1533
1534         rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1535         if (value == LED_MODE_TXRX_ACTIVITY ||
1536             value == LED_MODE_DEFAULT ||
1537             value == LED_MODE_ASUS)
1538                 rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
1539                                    LED_TYPE_ACTIVITY);
1540 #endif /* CONFIG_RT2X00_LIB_LEDS */
1541
1542         /*
1543          * Detect if this device has an hardware controlled radio.
1544          */
1545         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1546                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1547
1548         /*
1549          * Check if the BBP tuning should be enabled.
1550          */
1551         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1552
1553         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1554                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1555
1556         /*
1557          * Read the RSSI <-> dBm offset information.
1558          */
1559         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1560         rt2x00dev->rssi_offset =
1561             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1562
1563         return 0;
1564 }
1565
1566 /*
1567  * RF value list for RF2522
1568  * Supports: 2.4 GHz
1569  */
1570 static const struct rf_channel rf_vals_bg_2522[] = {
1571         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1572         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1573         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1574         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1575         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1576         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1577         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1578         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1579         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1580         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1581         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1582         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1583         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1584         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1585 };
1586
1587 /*
1588  * RF value list for RF2523
1589  * Supports: 2.4 GHz
1590  */
1591 static const struct rf_channel rf_vals_bg_2523[] = {
1592         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1593         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1594         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1595         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1596         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1597         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1598         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1599         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1600         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1601         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1602         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1603         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1604         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1605         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1606 };
1607
1608 /*
1609  * RF value list for RF2524
1610  * Supports: 2.4 GHz
1611  */
1612 static const struct rf_channel rf_vals_bg_2524[] = {
1613         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1614         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1615         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1616         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1617         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1618         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1619         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1620         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1621         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1622         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1623         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1624         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1625         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1626         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1627 };
1628
1629 /*
1630  * RF value list for RF2525
1631  * Supports: 2.4 GHz
1632  */
1633 static const struct rf_channel rf_vals_bg_2525[] = {
1634         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1635         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1636         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1637         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1638         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1639         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1640         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1641         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1642         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1643         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1644         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1645         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1646         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1647         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1648 };
1649
1650 /*
1651  * RF value list for RF2525e
1652  * Supports: 2.4 GHz
1653  */
1654 static const struct rf_channel rf_vals_bg_2525e[] = {
1655         { 1,  0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
1656         { 2,  0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
1657         { 3,  0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
1658         { 4,  0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
1659         { 5,  0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
1660         { 6,  0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
1661         { 7,  0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
1662         { 8,  0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
1663         { 9,  0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
1664         { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
1665         { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
1666         { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
1667         { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
1668         { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
1669 };
1670
1671 /*
1672  * RF value list for RF5222
1673  * Supports: 2.4 GHz & 5.2 GHz
1674  */
1675 static const struct rf_channel rf_vals_5222[] = {
1676         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1677         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1678         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1679         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1680         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1681         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1682         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1683         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1684         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1685         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1686         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1687         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1688         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1689         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1690
1691         /* 802.11 UNI / HyperLan 2 */
1692         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1693         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1694         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1695         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1696         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1697         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1698         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1699         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1700
1701         /* 802.11 HyperLan 2 */
1702         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1703         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1704         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1705         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1706         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1707         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1708         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1709         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1710         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1711         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1712
1713         /* 802.11 UNII */
1714         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1715         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1716         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1717         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1718         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1719 };
1720
1721 static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1722 {
1723         struct hw_mode_spec *spec = &rt2x00dev->spec;
1724         struct channel_info *info;
1725         char *tx_power;
1726         unsigned int i;
1727
1728         /*
1729          * Initialize all hw fields.
1730          */
1731         rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1732                                IEEE80211_HW_SIGNAL_DBM |
1733                                IEEE80211_HW_SUPPORTS_PS |
1734                                IEEE80211_HW_PS_NULLFUNC_STACK;
1735
1736         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
1737         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1738                                 rt2x00_eeprom_addr(rt2x00dev,
1739                                                    EEPROM_MAC_ADDR_0));
1740
1741         /*
1742          * Initialize hw_mode information.
1743          */
1744         spec->supported_bands = SUPPORT_BAND_2GHZ;
1745         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1746
1747         if (rt2x00_rf(rt2x00dev, RF2522)) {
1748                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1749                 spec->channels = rf_vals_bg_2522;
1750         } else if (rt2x00_rf(rt2x00dev, RF2523)) {
1751                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1752                 spec->channels = rf_vals_bg_2523;
1753         } else if (rt2x00_rf(rt2x00dev, RF2524)) {
1754                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1755                 spec->channels = rf_vals_bg_2524;
1756         } else if (rt2x00_rf(rt2x00dev, RF2525)) {
1757                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1758                 spec->channels = rf_vals_bg_2525;
1759         } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
1760                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1761                 spec->channels = rf_vals_bg_2525e;
1762         } else if (rt2x00_rf(rt2x00dev, RF5222)) {
1763                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1764                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1765                 spec->channels = rf_vals_5222;
1766         }
1767
1768         /*
1769          * Create channel information array
1770          */
1771         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
1772         if (!info)
1773                 return -ENOMEM;
1774
1775         spec->channels_info = info;
1776
1777         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1778         for (i = 0; i < 14; i++)
1779                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
1780
1781         if (spec->num_channels > 14) {
1782                 for (i = 14; i < spec->num_channels; i++)
1783                         info[i].tx_power1 = DEFAULT_TXPOWER;
1784         }
1785
1786         return 0;
1787 }
1788
1789 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1790 {
1791         int retval;
1792
1793         /*
1794          * Allocate eeprom data.
1795          */
1796         retval = rt2500pci_validate_eeprom(rt2x00dev);
1797         if (retval)
1798                 return retval;
1799
1800         retval = rt2500pci_init_eeprom(rt2x00dev);
1801         if (retval)
1802                 return retval;
1803
1804         /*
1805          * Initialize hw specifications.
1806          */
1807         retval = rt2500pci_probe_hw_mode(rt2x00dev);
1808         if (retval)
1809                 return retval;
1810
1811         /*
1812          * This device requires the atim queue and DMA-mapped skbs.
1813          */
1814         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1815         __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
1816
1817         /*
1818          * Set the rssi offset.
1819          */
1820         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1821
1822         return 0;
1823 }
1824
1825 /*
1826  * IEEE80211 stack callback functions.
1827  */
1828 static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
1829 {
1830         struct rt2x00_dev *rt2x00dev = hw->priv;
1831         u64 tsf;
1832         u32 reg;
1833
1834         rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1835         tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1836         rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1837         tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1838
1839         return tsf;
1840 }
1841
1842 static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
1843 {
1844         struct rt2x00_dev *rt2x00dev = hw->priv;
1845         u32 reg;
1846
1847         rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1848         return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1849 }
1850
1851 static const struct ieee80211_ops rt2500pci_mac80211_ops = {
1852         .tx                     = rt2x00mac_tx,
1853         .start                  = rt2x00mac_start,
1854         .stop                   = rt2x00mac_stop,
1855         .add_interface          = rt2x00mac_add_interface,
1856         .remove_interface       = rt2x00mac_remove_interface,
1857         .config                 = rt2x00mac_config,
1858         .configure_filter       = rt2x00mac_configure_filter,
1859         .set_tim                = rt2x00mac_set_tim,
1860         .get_stats              = rt2x00mac_get_stats,
1861         .bss_info_changed       = rt2x00mac_bss_info_changed,
1862         .conf_tx                = rt2x00mac_conf_tx,
1863         .get_tsf                = rt2500pci_get_tsf,
1864         .tx_last_beacon         = rt2500pci_tx_last_beacon,
1865         .rfkill_poll            = rt2x00mac_rfkill_poll,
1866 };
1867
1868 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
1869         .irq_handler            = rt2500pci_interrupt,
1870         .probe_hw               = rt2500pci_probe_hw,
1871         .initialize             = rt2x00pci_initialize,
1872         .uninitialize           = rt2x00pci_uninitialize,
1873         .get_entry_state        = rt2500pci_get_entry_state,
1874         .clear_entry            = rt2500pci_clear_entry,
1875         .set_device_state       = rt2500pci_set_device_state,
1876         .rfkill_poll            = rt2500pci_rfkill_poll,
1877         .link_stats             = rt2500pci_link_stats,
1878         .reset_tuner            = rt2500pci_reset_tuner,
1879         .link_tuner             = rt2500pci_link_tuner,
1880         .write_tx_desc          = rt2500pci_write_tx_desc,
1881         .write_tx_data          = rt2x00pci_write_tx_data,
1882         .write_beacon           = rt2500pci_write_beacon,
1883         .kick_tx_queue          = rt2500pci_kick_tx_queue,
1884         .kill_tx_queue          = rt2500pci_kill_tx_queue,
1885         .fill_rxdone            = rt2500pci_fill_rxdone,
1886         .config_filter          = rt2500pci_config_filter,
1887         .config_intf            = rt2500pci_config_intf,
1888         .config_erp             = rt2500pci_config_erp,
1889         .config_ant             = rt2500pci_config_ant,
1890         .config                 = rt2500pci_config,
1891 };
1892
1893 static const struct data_queue_desc rt2500pci_queue_rx = {
1894         .entry_num              = RX_ENTRIES,
1895         .data_size              = DATA_FRAME_SIZE,
1896         .desc_size              = RXD_DESC_SIZE,
1897         .priv_size              = sizeof(struct queue_entry_priv_pci),
1898 };
1899
1900 static const struct data_queue_desc rt2500pci_queue_tx = {
1901         .entry_num              = TX_ENTRIES,
1902         .data_size              = DATA_FRAME_SIZE,
1903         .desc_size              = TXD_DESC_SIZE,
1904         .priv_size              = sizeof(struct queue_entry_priv_pci),
1905 };
1906
1907 static const struct data_queue_desc rt2500pci_queue_bcn = {
1908         .entry_num              = BEACON_ENTRIES,
1909         .data_size              = MGMT_FRAME_SIZE,
1910         .desc_size              = TXD_DESC_SIZE,
1911         .priv_size              = sizeof(struct queue_entry_priv_pci),
1912 };
1913
1914 static const struct data_queue_desc rt2500pci_queue_atim = {
1915         .entry_num              = ATIM_ENTRIES,
1916         .data_size              = DATA_FRAME_SIZE,
1917         .desc_size              = TXD_DESC_SIZE,
1918         .priv_size              = sizeof(struct queue_entry_priv_pci),
1919 };
1920
1921 static const struct rt2x00_ops rt2500pci_ops = {
1922         .name                   = KBUILD_MODNAME,
1923         .max_sta_intf           = 1,
1924         .max_ap_intf            = 1,
1925         .eeprom_size            = EEPROM_SIZE,
1926         .rf_size                = RF_SIZE,
1927         .tx_queues              = NUM_TX_QUEUES,
1928         .extra_tx_headroom      = 0,
1929         .rx                     = &rt2500pci_queue_rx,
1930         .tx                     = &rt2500pci_queue_tx,
1931         .bcn                    = &rt2500pci_queue_bcn,
1932         .atim                   = &rt2500pci_queue_atim,
1933         .lib                    = &rt2500pci_rt2x00_ops,
1934         .hw                     = &rt2500pci_mac80211_ops,
1935 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1936         .debugfs                = &rt2500pci_rt2x00debug,
1937 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1938 };
1939
1940 /*
1941  * RT2500pci module information.
1942  */
1943 static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
1944         { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
1945         { 0, }
1946 };
1947
1948 MODULE_AUTHOR(DRV_PROJECT);
1949 MODULE_VERSION(DRV_VERSION);
1950 MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
1951 MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
1952 MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
1953 MODULE_LICENSE("GPL");
1954
1955 static struct pci_driver rt2500pci_driver = {
1956         .name           = KBUILD_MODNAME,
1957         .id_table       = rt2500pci_device_table,
1958         .probe          = rt2x00pci_probe,
1959         .remove         = __devexit_p(rt2x00pci_remove),
1960         .suspend        = rt2x00pci_suspend,
1961         .resume         = rt2x00pci_resume,
1962 };
1963
1964 static int __init rt2500pci_init(void)
1965 {
1966         return pci_register_driver(&rt2500pci_driver);
1967 }
1968
1969 static void __exit rt2500pci_exit(void)
1970 {
1971         pci_unregister_driver(&rt2500pci_driver);
1972 }
1973
1974 module_init(rt2500pci_init);
1975 module_exit(rt2500pci_exit);