SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/orinoco_cs.c

   1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
   2  *
   3  * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
   4  * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
   5  * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
   6  * It should also be usable on various Prism II based cards such as the
   7  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
   8  * cards such as the 3Com AirConnect and Ericsson WLAN.
   9  *
  10  * Copyright notice & release notes in file orinoco.c
  11  */
  12
  13 #define DRIVER_NAME "orinoco_cs"
  14 #define PFX DRIVER_NAME ": "
  15
  16 #include <linux/config.h>
  17 #include <linux/module.h>
  18 #include <linux/kernel.h>
  19 #include <linux/init.h>
  20 #include <linux/delay.h>
  21 #include <pcmcia/cs_types.h>
  22 #include <pcmcia/cs.h>
  23 #include <pcmcia/cistpl.h>
  24 #include <pcmcia/cisreg.h>
  25 #include <pcmcia/ds.h>
  26
  27 #include "orinoco.h"
  28
  29 /********************************************************************/
  30 /* Module stuff                                                     */
  31 /********************************************************************/
  32
  33 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
  34 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
  35 MODULE_LICENSE("Dual MPL/GPL");
  36
  37 /* Module parameters */
  38
  39 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  40  * don't have any CIS entry for it. This workaround it... */
  41 static int ignore_cis_vcc; /* = 0 */
  42 module_param(ignore_cis_vcc, int, 0);
  43 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
  44
  45 /********************************************************************/
  46 /* Magic constants                                                  */
  47 /********************************************************************/
  48
  49 /*
  50  * The dev_info variable is the "key" that is used to match up this
  51  * device driver with appropriate cards, through the card
  52  * configuration database.
  53  */
  54 static dev_info_t dev_info = DRIVER_NAME;
  55
  56 /********************************************************************/
  57 /* Data structures                                                  */
  58 /********************************************************************/
  59
  60 /* PCMCIA specific device information (goes in the card field of
  61  * struct orinoco_private */
  62 struct orinoco_pccard {
  63         dev_link_t link;
  64         dev_node_t node;
  65
  66         /* Used to handle hard reset */
  67         /* yuck, we need this hack to work around the insanity of the
  68          * PCMCIA layer */
  69         unsigned long hard_reset_in_progress;
  70 };
  71
  72 /*
  73  * A linked list of "instances" of the device.  Each actual PCMCIA
  74  * card corresponds to one device instance, and is described by one
  75  * dev_link_t structure (defined in ds.h).
  76  */
  77 static dev_link_t *dev_list; /* = NULL */
  78
  79 /********************************************************************/
  80 /* Function prototypes                                              */
  81 /********************************************************************/
  82
  83 static void orinoco_cs_release(dev_link_t *link);
  84 static void orinoco_cs_detach(dev_link_t *link);
  85
  86 /********************************************************************/
  87 /* Device methods                                                   */
  88 /********************************************************************/
  89
  90 static int
  91 orinoco_cs_hard_reset(struct orinoco_private *priv)
  92 {
  93         struct orinoco_pccard *card = priv->card;
  94         dev_link_t *link = &card->link;
  95         int err;
  96
  97         /* We need atomic ops here, because we're not holding the lock */
  98         set_bit(0, &card->hard_reset_in_progress);
  99
 100         err = pcmcia_reset_card(link->handle, NULL);
 101         if (err)
 102                 return err;
 103
 104         msleep(100);
 105         clear_bit(0, &card->hard_reset_in_progress);
 106
 107         return 0;
 108 }
 109
 110 /********************************************************************/
 111 /* PCMCIA stuff                                                     */
 112 /********************************************************************/
 113
 114 /*
 115  * This creates an "instance" of the driver, allocating local data
 116  * structures for one device.  The device is registered with Card
 117  * Services.
 118  *
 119  * The dev_link structure is initialized, but we don't actually
 120  * configure the card at this point -- we wait until we receive a card
 121  * insertion event.  */
 122 static dev_link_t *
 123 orinoco_cs_attach(void)
 124 {
 125         struct net_device *dev;
 126         struct orinoco_private *priv;
 127         struct orinoco_pccard *card;
 128         dev_link_t *link;
 129         client_reg_t client_reg;
 130         int ret;
 131
 132         dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
 133         if (! dev)
 134                 return NULL;
 135         priv = netdev_priv(dev);
 136         card = priv->card;
 137
 138         /* Link both structures together */
 139         link = &card->link;
 140         link->priv = dev;
 141
 142         /* Interrupt setup */
 143         link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
 144         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 145         link->irq.Handler = orinoco_interrupt;
 146         link->irq.Instance = dev;
 147
 148         /* General socket configuration defaults can go here.  In this
 149          * client, we assume very little, and rely on the CIS for
 150          * almost everything.  In most clients, many details (i.e.,
 151          * number, sizes, and attributes of IO windows) are fixed by
 152          * the nature of the device, and can be hard-wired here. */
 153         link->conf.Attributes = 0;
 154         link->conf.IntType = INT_MEMORY_AND_IO;
 155
 156         /* Register with Card Services */
 157         /* FIXME: need a lock? */
 158         link->next = dev_list;
 159         dev_list = link;
 160
 161         client_reg.dev_info = &dev_info;
 162         client_reg.Version = 0x0210; /* FIXME: what does this mean? */
 163         client_reg.event_callback_args.client_data = link;
 164
 165         ret = pcmcia_register_client(&link->handle, &client_reg);
 166         if (ret != CS_SUCCESS) {
 167                 cs_error(link->handle, RegisterClient, ret);
 168                 orinoco_cs_detach(link);
 169                 return NULL;
 170         }
 171
 172         return link;
 173 }                               /* orinoco_cs_attach */
 174
 175 /*
 176  * This deletes a driver "instance".  The device is de-registered with
 177  * Card Services.  If it has been released, all local data structures
 178  * are freed.  Otherwise, the structures will be freed when the device
 179  * is released.
 180  */
 181 static void orinoco_cs_detach(dev_link_t *link)
 182 {
 183         dev_link_t **linkp;
 184         struct net_device *dev = link->priv;
 185
 186         /* Locate device structure */
 187         for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
 188                 if (*linkp == link)
 189                         break;
 190
 191         BUG_ON(*linkp == NULL);
 192
 193         if (link->state & DEV_CONFIG)
 194                 orinoco_cs_release(link);
 195
 196         /* Break the link with Card Services */
 197         if (link->handle)
 198                 pcmcia_deregister_client(link->handle);
 199
 200         /* Unlink device structure, and free it */
 201         *linkp = link->next;
 202         DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
 203         if (link->dev) {
 204                 DEBUG(0, PFX "About to unregister net device %p\n",
 205                       dev);
 206                 unregister_netdev(dev);
 207         }
 208         free_orinocodev(dev);
 209 }                               /* orinoco_cs_detach */
 210
 211 /*
 212  * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
 213  * event is received, to configure the PCMCIA socket, and to make the
 214  * device available to the system.
 215  */
 216
 217 #define CS_CHECK(fn, ret) do { \
 218                 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
 219         } while (0)
 220
 221 static void
 222 orinoco_cs_config(dev_link_t *link)
 223 {
 224         struct net_device *dev = link->priv;
 225         client_handle_t handle = link->handle;
 226         struct orinoco_private *priv = netdev_priv(dev);
 227         struct orinoco_pccard *card = priv->card;
 228         hermes_t *hw = &priv->hw;
 229         int last_fn, last_ret;
 230         u_char buf[64];
 231         config_info_t conf;
 232         cisinfo_t info;
 233         tuple_t tuple;
 234         cisparse_t parse;
 235         void __iomem *mem;
 236
 237         CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info));
 238
 239         /*
 240          * This reads the card's CONFIG tuple to find its
 241          * configuration registers.
 242          */
 243         tuple.DesiredTuple = CISTPL_CONFIG;
 244         tuple.Attributes = 0;
 245         tuple.TupleData = buf;
 246         tuple.TupleDataMax = sizeof(buf);
 247         tuple.TupleOffset = 0;
 248         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
 249         CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
 250         CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
 251         link->conf.ConfigBase = parse.config.base;
 252         link->conf.Present = parse.config.rmask[0];
 253
 254         /* Configure card */
 255         link->state |= DEV_CONFIG;
 256
 257         /* Look up the current Vcc */
 258         CS_CHECK(GetConfigurationInfo,
 259                  pcmcia_get_configuration_info(handle, &conf));
 260         link->conf.Vcc = conf.Vcc;
 261
 262         /*
 263          * In this loop, we scan the CIS for configuration table
 264          * entries, each of which describes a valid card
 265          * configuration, including voltage, IO window, memory window,
 266          * and interrupt settings.
 267          *
 268          * We make no assumptions about the card to be configured: we
 269          * use just the information available in the CIS.  In an ideal
 270          * world, this would work for any PCMCIA card, but it requires
 271          * a complete and accurate CIS.  In practice, a driver usually
 272          * "knows" most of these things without consulting the CIS,
 273          * and most client drivers will only use the CIS to fill in
 274          * implementation-defined details.
 275          */
 276         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 277         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
 278         while (1) {
 279                 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
 280                 cistpl_cftable_entry_t dflt = { .index = 0 };
 281
 282                 if ( (pcmcia_get_tuple_data(handle, &tuple) != 0)
 283                     || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0))
 284                         goto next_entry;
 285
 286                 if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 287                         dflt = *cfg;
 288                 if (cfg->index == 0)
 289                         goto next_entry;
 290                 link->conf.ConfigIndex = cfg->index;
 291
 292                 /* Does this card need audio output? */
 293                 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 294                         link->conf.Attributes |= CONF_ENABLE_SPKR;
 295                         link->conf.Status = CCSR_AUDIO_ENA;
 296                 }
 297
 298                 /* Use power settings for Vcc and Vpp if present */
 299                 /* Note that the CIS values need to be rescaled */
 300                 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 301                         if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 302                                 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 303                                 if (!ignore_cis_vcc)
 304                                         goto next_entry;
 305                         }
 306                 } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
 307                         if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
 308                                 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
 309                                 if(!ignore_cis_vcc)
 310                                         goto next_entry;
 311                         }
 312                 }
 313
 314                 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 315                         link->conf.Vpp1 = link->conf.Vpp2 =
 316                             cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 317                 else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
 318                         link->conf.Vpp1 = link->conf.Vpp2 =
 319                             dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 320
 321                 /* Do we need to allocate an interrupt? */
 322                 link->conf.Attributes |= CONF_ENABLE_IRQ;
 323
 324                 /* IO window settings */
 325                 link->io.NumPorts1 = link->io.NumPorts2 = 0;
 326                 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
 327                         cistpl_io_t *io =
 328                             (cfg->io.nwin) ? &cfg->io : &dflt.io;
 329                         link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 330                         if (!(io->flags & CISTPL_IO_8BIT))
 331                                 link->io.Attributes1 =
 332                                     IO_DATA_PATH_WIDTH_16;
 333                         if (!(io->flags & CISTPL_IO_16BIT))
 334                                 link->io.Attributes1 =
 335                                     IO_DATA_PATH_WIDTH_8;
 336                         link->io.IOAddrLines =
 337                             io->flags & CISTPL_IO_LINES_MASK;
 338                         link->io.BasePort1 = io->win[0].base;
 339                         link->io.NumPorts1 = io->win[0].len;
 340                         if (io->nwin > 1) {
 341                                 link->io.Attributes2 =
 342                                     link->io.Attributes1;
 343                                 link->io.BasePort2 = io->win[1].base;
 344                                 link->io.NumPorts2 = io->win[1].len;
 345                         }
 346
 347                         /* This reserves IO space but doesn't actually enable it */
 348                         if (pcmcia_request_io(link->handle, &link->io) != 0)
 349                                 goto next_entry;
 350                 }
 351
 352
 353                 /* If we got this far, we're cool! */
 354
 355                 break;
 356
 357         next_entry:
 358                 if (link->io.NumPorts1)
 359                         pcmcia_release_io(link->handle, &link->io);
 360                 last_ret = pcmcia_get_next_tuple(handle, &tuple);
 361                 if (last_ret  == CS_NO_MORE_ITEMS) {
 362                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
 363                                "CIS configuration.  Maybe you need the "
 364                                "ignore_cis_vcc=1 parameter.\n");
 365                         goto cs_failed;
 366                 }
 367         }
 368
 369         /*
 370          * Allocate an interrupt line.  Note that this does not assign
 371          * a handler to the interrupt, unless the 'Handler' member of
 372          * the irq structure is initialized.
 373          */
 374         CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
 375
 376         /* We initialize the hermes structure before completing PCMCIA
 377          * configuration just in case the interrupt handler gets
 378          * called. */
 379         mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 380         if (!mem)
 381                 goto cs_failed;
 382
 383         hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 384
 385         /*
 386          * This actually configures the PCMCIA socket -- setting up
 387          * the I/O windows and the interrupt mapping, and putting the
 388          * card and host interface into "Memory and IO" mode.
 389          */
 390         CS_CHECK(RequestConfiguration,
 391                  pcmcia_request_configuration(link->handle, &link->conf));
 392
 393         /* Ok, we have the configuration, prepare to register the netdev */
 394         dev->base_addr = link->io.BasePort1;
 395         dev->irq = link->irq.AssignedIRQ;
 396         SET_MODULE_OWNER(dev);
 397         card->node.major = card->node.minor = 0;
 398
 399         SET_NETDEV_DEV(dev, &handle_to_dev(handle));
 400         /* Tell the stack we exist */
 401         if (register_netdev(dev) != 0) {
 402                 printk(KERN_ERR PFX "register_netdev() failed\n");
 403                 goto failed;
 404         }
 405
 406         /* At this point, the dev_node_t structure(s) needs to be
 407          * initialized and arranged in a linked list at link->dev. */
 408         strcpy(card->node.dev_name, dev->name);
 409         link->dev = &card->node; /* link->dev being non-NULL is also
 410                                     used to indicate that the
 411                                     net_device has been registered */
 412         link->state &= ~DEV_CONFIG_PENDING;
 413
 414         /* Finally, report what we've done */
 415         printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
 416                dev->name, link->conf.ConfigIndex,
 417                link->conf.Vcc / 10, link->conf.Vcc % 10);
 418         if (link->conf.Vpp1)
 419                 printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
 420                        link->conf.Vpp1 % 10);
 421         printk(", irq %d", link->irq.AssignedIRQ);
 422         if (link->io.NumPorts1)
 423                 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 424                        link->io.BasePort1 + link->io.NumPorts1 - 1);
 425         if (link->io.NumPorts2)
 426                 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 427                        link->io.BasePort2 + link->io.NumPorts2 - 1);
 428         printk("\n");
 429
 430         return;
 431
 432  cs_failed:
 433         cs_error(link->handle, last_fn, last_ret);
 434
 435  failed:
 436         orinoco_cs_release(link);
 437 }                               /* orinoco_cs_config */
 438
 439 /*
 440  * After a card is removed, orinoco_cs_release() will unregister the
 441  * device, and release the PCMCIA configuration.  If the device is
 442  * still open, this will be postponed until it is closed.
 443  */
 444 static void
 445 orinoco_cs_release(dev_link_t *link)
 446 {
 447         struct net_device *dev = link->priv;
 448         struct orinoco_private *priv = netdev_priv(dev);
 449         unsigned long flags;
 450
 451         /* We're committed to taking the device away now, so mark the
 452          * hardware as unavailable */
 453         spin_lock_irqsave(&priv->lock, flags);
 454         priv->hw_unavailable++;
 455         spin_unlock_irqrestore(&priv->lock, flags);
 456
 457         /* Don't bother checking to see if these succeed or not */
 458         pcmcia_release_configuration(link->handle);
 459         if (link->io.NumPorts1)
 460                 pcmcia_release_io(link->handle, &link->io);
 461         if (link->irq.AssignedIRQ)
 462                 pcmcia_release_irq(link->handle, &link->irq);
 463         link->state &= ~DEV_CONFIG;
 464         if (priv->hw.iobase)
 465                 ioport_unmap(priv->hw.iobase);
 466 }                               /* orinoco_cs_release */
 467
 468 static int orinoco_cs_suspend(struct pcmcia_device *p_dev)
 469 {
 470         dev_link_t *link = dev_to_instance(p_dev);
 471         struct net_device *dev = link->priv;
 472         struct orinoco_private *priv = netdev_priv(dev);
 473         struct orinoco_pccard *card = priv->card;
 474         int err = 0;
 475         unsigned long flags;
 476
 477         link->state |= DEV_SUSPEND;
 478         if (link->state & DEV_CONFIG) {
 479                 /* This is probably racy, but I can't think of
 480                    a better way, short of rewriting the PCMCIA
 481                    layer to not suck :-( */
 482                 if (! test_bit(0, &card->hard_reset_in_progress)) {
 483                         spin_lock_irqsave(&priv->lock, flags);
 484
 485                         err = __orinoco_down(dev);
 486                         if (err)
 487                                 printk(KERN_WARNING "%s: Error %d downing interface\n",
 488                                        dev->name, err);
 489
 490                         netif_device_detach(dev);
 491                         priv->hw_unavailable++;
 492
 493                         spin_unlock_irqrestore(&priv->lock, flags);
 494                 }
 495
 496                 pcmcia_release_configuration(link->handle);
 497         }
 498
 499         return 0;
 500 }
 501
 502 static int orinoco_cs_resume(struct pcmcia_device *p_dev)
 503 {
 504         dev_link_t *link = dev_to_instance(p_dev);
 505         struct net_device *dev = link->priv;
 506         struct orinoco_private *priv = netdev_priv(dev);
 507         struct orinoco_pccard *card = priv->card;
 508         int err = 0;
 509         unsigned long flags;
 510
 511         link->state &= ~DEV_SUSPEND;
 512         if (link->state & DEV_CONFIG) {
 513                 /* FIXME: should we double check that this is
 514                  * the same card as we had before */
 515                 pcmcia_request_configuration(link->handle, &link->conf);
 516
 517                 if (! test_bit(0, &card->hard_reset_in_progress)) {
 518                         err = orinoco_reinit_firmware(dev);
 519                         if (err) {
 520                                 printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
 521                                        dev->name, err);
 522                                 return -EIO;
 523                         }
 524
 525                         spin_lock_irqsave(&priv->lock, flags);
 526
 527                         netif_device_attach(dev);
 528                         priv->hw_unavailable--;
 529
 530                         if (priv->open && ! priv->hw_unavailable) {
 531                                 err = __orinoco_up(dev);
 532                                 if (err)
 533                                         printk(KERN_ERR "%s: Error %d restarting card\n",
 534                                                dev->name, err);
 535                         }
 536
 537                         spin_unlock_irqrestore(&priv->lock, flags);
 538                 }
 539         }
 540
 541         return 0;
 542 }
 543
 544
 545 /*
 546  * The card status event handler.  Mostly, this schedules other stuff
 547  * to run after an event is received.
 548  */
 549 static int
 550 orinoco_cs_event(event_t event, int priority,
 551                        event_callback_args_t * args)
 552 {
 553         dev_link_t *link = args->client_data;
 554         struct net_device *dev = link->priv;
 555         struct orinoco_private *priv = netdev_priv(dev);
 556         int err = 0;
 557
 558         switch (event) {
 559         case CS_EVENT_CARD_REMOVAL:
 560                 link->state &= ~DEV_PRESENT;
 561                 if (link->state & DEV_CONFIG) {
 562                         unsigned long flags;
 563
 564                         spin_lock_irqsave(&priv->lock, flags);
 565                         netif_device_detach(dev);
 566                         priv->hw_unavailable++;
 567                         spin_unlock_irqrestore(&priv->lock, flags);
 568                 }
 569                 break;
 570
 571         case CS_EVENT_CARD_INSERTION:
 572                 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 573                 orinoco_cs_config(link);
 574                 break;
 575         }
 576
 577         return err;
 578 }                               /* orinoco_cs_event */
 579
 580 /********************************************************************/
 581 /* Module initialization                                            */
 582 /********************************************************************/
 583
 584 /* Can't be declared "const" or the whole __initdata section will
 585  * become const */
 586 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 587         " (David Gibson <hermes@gibson.dropbear.id.au>, "
 588         "Pavel Roskin <proski@gnu.org>, et al)";
 589
 590 static struct pcmcia_device_id orinoco_cs_ids[] = {
 591         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
 592         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
 593         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
 594         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
 595         PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
 596         PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
 597         PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
 598         PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
 599         PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
 600         PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
 601         PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 602         PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 603         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
 604         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 605         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 606         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
 607         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
 608         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 609         PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 610         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
 611         PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
 612         PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 613         PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
 614         PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
 615         PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
 616         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
 617         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
 618         PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
 619         PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 620         PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 621         PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
 622         PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
 623         PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
 624         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
 625         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
 626         PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
 627         PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
 628         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 629         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
 630         PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
 631         PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
 632         PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
 633         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 634         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 635         PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
 636         PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
 637         PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
 638         PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
 639         PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
 640         PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
 641         PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
 642         PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
 643         PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
 644         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 645         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 646         PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
 647         PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
 648         PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 649         PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
 650         PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
 651         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
 652         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
 653         PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
 654         PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
 655         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 656         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
 657         PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
 658         PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
 659         PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
 660         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
 661         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 662         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
 663         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
 664         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
 665         PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
 666         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 667         PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 668         PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
 669         PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
 670         PCMCIA_DEVICE_NULL,
 671 };
 672 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
 673
 674 static struct pcmcia_driver orinoco_driver = {
 675         .owner          = THIS_MODULE,
 676         .drv            = {
 677                 .name   = DRIVER_NAME,
 678         },
 679         .attach         = orinoco_cs_attach,
 680         .detach         = orinoco_cs_detach,
 681         .event          = orinoco_cs_event,
 682         .id_table       = orinoco_cs_ids,
 683         .suspend        = orinoco_cs_suspend,
 684         .resume         = orinoco_cs_resume,
 685 };
 686
 687 static int __init
 688 init_orinoco_cs(void)
 689 {
 690         printk(KERN_DEBUG "%s\n", version);
 691
 692         return pcmcia_register_driver(&orinoco_driver);
 693 }
 694
 695 static void __exit
 696 exit_orinoco_cs(void)
 697 {
 698         pcmcia_unregister_driver(&orinoco_driver);
 699         BUG_ON(dev_list != NULL);
 700 }
 701
 702 module_init(init_orinoco_cs);
 703 module_exit(exit_orinoco_cs);