2 * Functions implementing wlan scan IOCTL and firmware command APIs
4 * IOCTL handlers as well as command preperation and response routines
5 * for sending scan commands to the firmware.
7 #include <linux/ctype.h>
9 #include <linux/netdevice.h>
10 #include <linux/wireless.h>
11 #include <linux/etherdevice.h>
13 #include <net/ieee80211.h>
14 #include <net/iw_handler.h>
21 //! Approximate amount of data needed to pass a scan result back to iwlist
22 #define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN \
29 + 40) /* 40 for WPAIE */
31 //! Memory needed to store a max sized channel List TLV for a firmware scan
32 #define CHAN_TLV_MAX_SIZE (sizeof(struct mrvlietypesheader) \
33 + (MRVDRV_MAX_CHANNELS_PER_SCAN \
34 * sizeof(struct chanscanparamset)))
36 //! Memory needed to store a max number/size SSID TLV for a firmware scan
37 #define SSID_TLV_MAX_SIZE (1 * sizeof(struct mrvlietypes_ssidparamset))
39 //! Maximum memory needed for a wlan_scan_cmd_config with all TLVs at max
40 #define MAX_SCAN_CFG_ALLOC (sizeof(struct wlan_scan_cmd_config) \
41 + sizeof(struct mrvlietypes_numprobes) \
45 //! The maximum number of channels the firmware can scan per command
46 #define MRVDRV_MAX_CHANNELS_PER_SCAN 14
49 * @brief Number of channels to scan per firmware scan command issuance.
51 * Number restricted to prevent hitting the limit on the amount of scan data
52 * returned in a single firmware scan command.
54 #define MRVDRV_CHANNELS_PER_SCAN_CMD 4
56 //! Scan time specified in the channel TLV for each channel for passive scans
57 #define MRVDRV_PASSIVE_SCAN_CHAN_TIME 100
59 //! Scan time specified in the channel TLV for each channel for active scans
60 #define MRVDRV_ACTIVE_SCAN_CHAN_TIME 100
62 const u8 zeromac[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
63 const u8 bcastmac[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
65 static inline void clear_bss_descriptor (struct bss_descriptor * bss)
67 /* Don't blow away ->list, just BSS data */
68 memset(bss, 0, offsetof(struct bss_descriptor, list));
71 static inline int match_bss_no_security(struct wlan_802_11_security * secinfo,
72 struct bss_descriptor * match_bss)
74 if ( !secinfo->wep_enabled
75 && !secinfo->WPAenabled
76 && !secinfo->WPA2enabled
77 && match_bss->wpa_ie[0] != WPA_IE
78 && match_bss->rsn_ie[0] != WPA2_IE
79 && !match_bss->privacy) {
85 static inline int match_bss_static_wep(struct wlan_802_11_security * secinfo,
86 struct bss_descriptor * match_bss)
88 if ( secinfo->wep_enabled
89 && !secinfo->WPAenabled
90 && !secinfo->WPA2enabled
91 && match_bss->privacy) {
97 static inline int match_bss_wpa(struct wlan_802_11_security * secinfo,
98 struct bss_descriptor * match_bss)
100 if ( !secinfo->wep_enabled
101 && secinfo->WPAenabled
102 && !secinfo->WPA2enabled
103 && (match_bss->wpa_ie[0] == WPA_IE)
104 /* privacy bit may NOT be set in some APs like LinkSys WRT54G
112 static inline int match_bss_wpa2(struct wlan_802_11_security * secinfo,
113 struct bss_descriptor * match_bss)
115 if ( !secinfo->wep_enabled
116 && !secinfo->WPAenabled
117 && secinfo->WPA2enabled
118 && (match_bss->rsn_ie[0] == WPA2_IE)
119 /* privacy bit may NOT be set in some APs like LinkSys WRT54G
127 static inline int match_bss_dynamic_wep(struct wlan_802_11_security * secinfo,
128 struct bss_descriptor * match_bss)
130 if ( !secinfo->wep_enabled
131 && !secinfo->WPAenabled
132 && !secinfo->WPA2enabled
133 && (match_bss->wpa_ie[0] != WPA_IE)
134 && (match_bss->rsn_ie[0] != WPA2_IE)
135 && match_bss->privacy) {
142 * @brief Check if a scanned network compatible with the driver settings
144 * WEP WPA WPA2 ad-hoc encrypt Network
145 * enabled enabled enabled AES mode privacy WPA WPA2 Compatible
146 * 0 0 0 0 NONE 0 0 0 yes No security
147 * 1 0 0 0 NONE 1 0 0 yes Static WEP
148 * 0 1 0 0 x 1x 1 x yes WPA
149 * 0 0 1 0 x 1x x 1 yes WPA2
150 * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES
151 * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP
154 * @param adapter A pointer to wlan_adapter
155 * @param index Index in scantable to check against current driver settings
156 * @param mode Network mode: Infrastructure or IBSS
158 * @return Index in scantable, or error code if negative
160 static int is_network_compatible(wlan_adapter * adapter,
161 struct bss_descriptor * bss, u8 mode)
165 lbs_deb_enter(LBS_DEB_ASSOC);
167 if (bss->mode != mode)
170 if ((matched = match_bss_no_security(&adapter->secinfo, bss))) {
172 } else if ((matched = match_bss_static_wep(&adapter->secinfo, bss))) {
174 } else if ((matched = match_bss_wpa(&adapter->secinfo, bss))) {
176 "is_network_compatible() WPA: wpa_ie=%#x "
177 "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
178 "privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0],
179 adapter->secinfo.wep_enabled ? "e" : "d",
180 adapter->secinfo.WPAenabled ? "e" : "d",
181 adapter->secinfo.WPA2enabled ? "e" : "d",
184 } else if ((matched = match_bss_wpa2(&adapter->secinfo, bss))) {
186 "is_network_compatible() WPA2: wpa_ie=%#x "
187 "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
188 "privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0],
189 adapter->secinfo.wep_enabled ? "e" : "d",
190 adapter->secinfo.WPAenabled ? "e" : "d",
191 adapter->secinfo.WPA2enabled ? "e" : "d",
194 } else if ((matched = match_bss_dynamic_wep(&adapter->secinfo, bss))) {
196 "is_network_compatible() dynamic WEP: "
197 "wpa_ie=%#x wpa2_ie=%#x privacy=%#x\n",
204 /* bss security settings don't match those configured on card */
206 "is_network_compatible() FAILED: wpa_ie=%#x "
207 "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s privacy=%#x\n",
208 bss->wpa_ie[0], bss->rsn_ie[0],
209 adapter->secinfo.wep_enabled ? "e" : "d",
210 adapter->secinfo.WPAenabled ? "e" : "d",
211 adapter->secinfo.WPA2enabled ? "e" : "d",
215 lbs_deb_leave(LBS_DEB_SCAN);
220 * @brief Post process the scan table after a new scan command has completed
222 * Inspect each entry of the scan table and try to find an entry that
223 * matches our current associated/joined network from the scan. If
224 * one is found, update the stored copy of the bssdescriptor for our
227 * Debug dump the current scan table contents if compiled accordingly.
229 * @param priv A pointer to wlan_private structure
233 static void wlan_scan_process_results(wlan_private * priv)
235 wlan_adapter *adapter = priv->adapter;
236 struct bss_descriptor * iter_bss;
238 if (adapter->connect_status == libertas_connected)
241 mutex_lock(&adapter->lock);
242 list_for_each_entry (iter_bss, &adapter->network_list, list) {
243 lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
244 i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
245 iter_bss->ssid.ssid);
247 mutex_unlock(&adapter->lock);
251 * @brief Create a channel list for the driver to scan based on region info
253 * Use the driver region/band information to construct a comprehensive list
254 * of channels to scan. This routine is used for any scan that is not
255 * provided a specific channel list to scan.
257 * @param priv A pointer to wlan_private structure
258 * @param scanchanlist Output parameter: resulting channel list to scan
259 * @param filteredscan Flag indicating whether or not a BSSID or SSID filter
260 * is being sent in the command to firmware. Used to
261 * increase the number of channels sent in a scan
262 * command and to disable the firmware channel scan
267 static void wlan_scan_create_channel_list(wlan_private * priv,
268 struct chanscanparamset * scanchanlist,
272 wlan_adapter *adapter = priv->adapter;
273 struct region_channel *scanregion;
274 struct chan_freq_power *cfp;
282 /* Set the default scan type to the user specified type, will later
283 * be changed to passive on a per channel basis if restricted by
284 * regulatory requirements (11d or 11h)
286 scantype = adapter->scantype;
288 for (rgnidx = 0; rgnidx < ARRAY_SIZE(adapter->region_channel); rgnidx++) {
289 if (priv->adapter->enable11d &&
290 adapter->connect_status != libertas_connected) {
291 /* Scan all the supported chan for the first scan */
292 if (!adapter->universal_channel[rgnidx].valid)
294 scanregion = &adapter->universal_channel[rgnidx];
296 /* clear the parsed_region_chan for the first scan */
297 memset(&adapter->parsed_region_chan, 0x00,
298 sizeof(adapter->parsed_region_chan));
300 if (!adapter->region_channel[rgnidx].valid)
302 scanregion = &adapter->region_channel[rgnidx];
306 nextchan < scanregion->nrcfp; nextchan++, chanidx++) {
308 cfp = scanregion->CFP + nextchan;
310 if (priv->adapter->enable11d) {
312 libertas_get_scan_type_11d(cfp->channel,
317 switch (scanregion->band) {
321 scanchanlist[chanidx].radiotype =
322 cmd_scan_radio_type_bg;
326 if (scantype == cmd_scan_type_passive) {
327 scanchanlist[chanidx].maxscantime =
329 (MRVDRV_PASSIVE_SCAN_CHAN_TIME);
330 scanchanlist[chanidx].chanscanmode.passivescan =
333 scanchanlist[chanidx].maxscantime =
335 (MRVDRV_ACTIVE_SCAN_CHAN_TIME);
336 scanchanlist[chanidx].chanscanmode.passivescan =
340 scanchanlist[chanidx].channumber = cfp->channel;
343 scanchanlist[chanidx].chanscanmode.
351 * @brief Construct a wlan_scan_cmd_config structure to use in issue scan cmds
353 * Application layer or other functions can invoke wlan_scan_networks
354 * with a scan configuration supplied in a wlan_ioctl_user_scan_cfg struct.
355 * This structure is used as the basis of one or many wlan_scan_cmd_config
356 * commands that are sent to the command processing module and sent to
359 * Create a wlan_scan_cmd_config based on the following user supplied
360 * parameters (if present):
363 * - Number of Probes to be sent
366 * If the SSID or BSSID filter is not present, disable/clear the filter.
367 * If the number of probes is not set, use the adapter default setting
368 * Qualify the channel
370 * @param priv A pointer to wlan_private structure
371 * @param puserscanin NULL or pointer to scan configuration parameters
372 * @param ppchantlvout Output parameter: Pointer to the start of the
373 * channel TLV portion of the output scan config
374 * @param pscanchanlist Output parameter: Pointer to the resulting channel
376 * @param pmaxchanperscan Output parameter: Number of channels to scan for
377 * each issuance of the firmware scan command
378 * @param pfilteredscan Output parameter: Flag indicating whether or not
379 * a BSSID or SSID filter is being sent in the
380 * command to firmware. Used to increase the number
381 * of channels sent in a scan command and to
382 * disable the firmware channel scan filter.
383 * @param pscancurrentonly Output parameter: Flag indicating whether or not
384 * we are only scanning our current active channel
386 * @return resulting scan configuration
388 static struct wlan_scan_cmd_config *
389 wlan_scan_setup_scan_config(wlan_private * priv,
390 const struct wlan_ioctl_user_scan_cfg * puserscanin,
391 struct mrvlietypes_chanlistparamset ** ppchantlvout,
392 struct chanscanparamset * pscanchanlist,
393 int *pmaxchanperscan,
395 u8 * pscancurrentonly)
397 wlan_adapter *adapter = priv->adapter;
398 struct mrvlietypes_numprobes *pnumprobestlv;
399 struct mrvlietypes_ssidparamset *pssidtlv;
400 struct wlan_scan_cmd_config * pscancfgout = NULL;
409 pscancfgout = kzalloc(MAX_SCAN_CFG_ALLOC, GFP_KERNEL);
410 if (pscancfgout == NULL)
413 /* The tlvbufferlen is calculated for each scan command. The TLVs added
414 * in this routine will be preserved since the routine that sends
415 * the command will append channelTLVs at *ppchantlvout. The difference
416 * between the *ppchantlvout and the tlvbuffer start will be used
417 * to calculate the size of anything we add in this routine.
419 pscancfgout->tlvbufferlen = 0;
421 /* Running tlv pointer. Assigned to ppchantlvout at end of function
422 * so later routines know where channels can be added to the command buf
424 ptlvpos = pscancfgout->tlvbuffer;
427 * Set the initial scan paramters for progressive scanning. If a specific
428 * BSSID or SSID is used, the number of channels in the scan command
429 * will be increased to the absolute maximum
431 *pmaxchanperscan = MRVDRV_CHANNELS_PER_SCAN_CMD;
433 /* Initialize the scan as un-filtered by firmware, set to TRUE below if
434 * a SSID or BSSID filter is sent in the command
438 /* Initialize the scan as not being only on the current channel. If
439 * the channel list is customized, only contains one channel, and
440 * is the active channel, this is set true and data flow is not halted.
442 *pscancurrentonly = 0;
446 /* Set the bss type scan filter, use adapter setting if unset */
447 pscancfgout->bsstype =
448 (puserscanin->bsstype ? puserscanin->bsstype : adapter->
451 /* Set the number of probes to send, use adapter setting if unset */
452 numprobes = (puserscanin->numprobes ? puserscanin->numprobes :
453 adapter->scanprobes);
456 * Set the BSSID filter to the incoming configuration,
457 * if non-zero. If not set, it will remain disabled (all zeros).
459 memcpy(pscancfgout->bssid, puserscanin->bssid,
460 sizeof(pscancfgout->bssid));
462 if (puserscanin->ssid_len) {
464 (struct mrvlietypes_ssidparamset *) pscancfgout->
466 pssidtlv->header.type = cpu_to_le16(TLV_TYPE_SSID);
467 pssidtlv->header.len = cpu_to_le16(puserscanin->ssid_len);
468 memcpy(pssidtlv->ssid, puserscanin->ssid,
469 puserscanin->ssid_len);
470 ptlvpos += sizeof(pssidtlv->header) + puserscanin->ssid_len;
474 * The default number of channels sent in the command is low to
475 * ensure the response buffer from the firmware does not truncate
476 * scan results. That is not an issue with an SSID or BSSID
477 * filter applied to the scan results in the firmware.
479 if ( puserscanin->ssid_len
480 || (compare_ether_addr(pscancfgout->bssid, &zeromac[0]) != 0)) {
481 *pmaxchanperscan = MRVDRV_MAX_CHANNELS_PER_SCAN;
485 pscancfgout->bsstype = adapter->scanmode;
486 numprobes = adapter->scanprobes;
489 /* If the input config or adapter has the number of Probes set, add tlv */
491 pnumprobestlv = (struct mrvlietypes_numprobes *) ptlvpos;
492 pnumprobestlv->header.type =
493 cpu_to_le16(TLV_TYPE_NUMPROBES);
494 pnumprobestlv->header.len = sizeof(pnumprobestlv->numprobes);
495 pnumprobestlv->numprobes = cpu_to_le16(numprobes);
498 sizeof(pnumprobestlv->header) + pnumprobestlv->header.len;
500 pnumprobestlv->header.len =
501 cpu_to_le16(pnumprobestlv->header.len);
505 * Set the output for the channel TLV to the address in the tlv buffer
506 * past any TLVs that were added in this fuction (SSID, numprobes).
507 * channel TLVs will be added past this for each scan command, preserving
508 * the TLVs that were previously added.
510 *ppchantlvout = (struct mrvlietypes_chanlistparamset *) ptlvpos;
512 if (puserscanin && puserscanin->chanlist[0].channumber) {
514 lbs_deb_scan("Scan: Using supplied channel list\n");
517 chanidx < WLAN_IOCTL_USER_SCAN_CHAN_MAX
518 && puserscanin->chanlist[chanidx].channumber; chanidx++) {
520 channel = puserscanin->chanlist[chanidx].channumber;
521 (pscanchanlist + chanidx)->channumber = channel;
523 radiotype = puserscanin->chanlist[chanidx].radiotype;
524 (pscanchanlist + chanidx)->radiotype = radiotype;
526 scantype = puserscanin->chanlist[chanidx].scantype;
528 if (scantype == cmd_scan_type_passive) {
530 chanidx)->chanscanmode.passivescan = 1;
533 chanidx)->chanscanmode.passivescan = 0;
536 if (puserscanin->chanlist[chanidx].scantime) {
538 puserscanin->chanlist[chanidx].scantime;
540 if (scantype == cmd_scan_type_passive) {
541 scandur = MRVDRV_PASSIVE_SCAN_CHAN_TIME;
543 scandur = MRVDRV_ACTIVE_SCAN_CHAN_TIME;
547 (pscanchanlist + chanidx)->minscantime =
548 cpu_to_le16(scandur);
549 (pscanchanlist + chanidx)->maxscantime =
550 cpu_to_le16(scandur);
553 /* Check if we are only scanning the current channel */
554 if ((chanidx == 1) && (puserscanin->chanlist[0].channumber
556 priv->adapter->curbssparams.channel)) {
557 *pscancurrentonly = 1;
558 lbs_deb_scan("Scan: Scanning current channel only");
562 lbs_deb_scan("Scan: Creating full region channel list\n");
563 wlan_scan_create_channel_list(priv, pscanchanlist,
572 * @brief Construct and send multiple scan config commands to the firmware
574 * Previous routines have created a wlan_scan_cmd_config with any requested
575 * TLVs. This function splits the channel TLV into maxchanperscan lists
576 * and sends the portion of the channel TLV along with the other TLVs
577 * to the wlan_cmd routines for execution in the firmware.
579 * @param priv A pointer to wlan_private structure
580 * @param maxchanperscan Maximum number channels to be included in each
581 * scan command sent to firmware
582 * @param filteredscan Flag indicating whether or not a BSSID or SSID
583 * filter is being used for the firmware command
584 * scan command sent to firmware
585 * @param pscancfgout Scan configuration used for this scan.
586 * @param pchantlvout Pointer in the pscancfgout where the channel TLV
587 * should start. This is past any other TLVs that
588 * must be sent down in each firmware command.
589 * @param pscanchanlist List of channels to scan in maxchanperscan segments
591 * @return 0 or error return otherwise
593 static int wlan_scan_channel_list(wlan_private * priv,
596 struct wlan_scan_cmd_config * pscancfgout,
597 struct mrvlietypes_chanlistparamset * pchantlvout,
598 struct chanscanparamset * pscanchanlist,
599 const struct wlan_ioctl_user_scan_cfg * puserscanin,
602 struct chanscanparamset *ptmpchan;
603 struct chanscanparamset *pstartchan;
609 union iwreq_data wrqu;
611 lbs_deb_enter(LBS_DEB_ASSOC);
613 if (pscancfgout == 0 || pchantlvout == 0 || pscanchanlist == 0) {
614 lbs_deb_scan("Scan: Null detect: %p, %p, %p\n",
615 pscancfgout, pchantlvout, pscanchanlist);
619 pchantlvout->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
621 /* Set the temp channel struct pointer to the start of the desired list */
622 ptmpchan = pscanchanlist;
624 if (priv->adapter->last_scanned_channel && !puserscanin)
625 ptmpchan += priv->adapter->last_scanned_channel;
627 /* Loop through the desired channel list, sending a new firmware scan
628 * commands for each maxchanperscan channels (or for 1,6,11 individually
629 * if configured accordingly)
631 while (ptmpchan->channumber) {
634 pchantlvout->header.len = 0;
635 scanband = ptmpchan->radiotype;
636 pstartchan = ptmpchan;
639 /* Construct the channel TLV for the scan command. Continue to
640 * insert channel TLVs until:
641 * - the tlvidx hits the maximum configured per scan command
642 * - the next channel to insert is 0 (end of desired channel list)
643 * - doneearly is set (controlling individual scanning of 1,6,11)
645 while (tlvidx < maxchanperscan && ptmpchan->channumber
646 && !doneearly && scanned < 2) {
649 "Scan: Chan(%3d), Radio(%d), mode(%d,%d), Dur(%d)\n",
650 ptmpchan->channumber, ptmpchan->radiotype,
651 ptmpchan->chanscanmode.passivescan,
652 ptmpchan->chanscanmode.disablechanfilt,
653 ptmpchan->maxscantime);
655 /* Copy the current channel TLV to the command being prepared */
656 memcpy(pchantlvout->chanscanparam + tlvidx,
657 ptmpchan, sizeof(pchantlvout->chanscanparam));
659 /* Increment the TLV header length by the size appended */
660 pchantlvout->header.len +=
661 sizeof(pchantlvout->chanscanparam);
664 * The tlv buffer length is set to the number of bytes of the
665 * between the channel tlv pointer and the start of the
666 * tlv buffer. This compensates for any TLVs that were appended
667 * before the channel list.
669 pscancfgout->tlvbufferlen = ((u8 *) pchantlvout
670 - pscancfgout->tlvbuffer);
672 /* Add the size of the channel tlv header and the data length */
673 pscancfgout->tlvbufferlen +=
674 (sizeof(pchantlvout->header)
675 + pchantlvout->header.len);
677 /* Increment the index to the channel tlv we are constructing */
682 /* Stop the loop if the *current* channel is in the 1,6,11 set
683 * and we are not filtering on a BSSID or SSID.
685 if (!filteredscan && (ptmpchan->channumber == 1
686 || ptmpchan->channumber == 6
687 || ptmpchan->channumber == 11)) {
691 /* Increment the tmp pointer to the next channel to be scanned */
695 /* Stop the loop if the *next* channel is in the 1,6,11 set.
696 * This will cause it to be the only channel scanned on the next
699 if (!filteredscan && (ptmpchan->channumber == 1
700 || ptmpchan->channumber == 6
701 || ptmpchan->channumber == 11)) {
706 /* Send the scan command to the firmware with the specified cfg */
707 ret = libertas_prepare_and_send_command(priv, cmd_802_11_scan, 0,
709 if (scanned >= 2 && !full_scan) {
717 priv->adapter->last_scanned_channel = ptmpchan->channumber;
719 /* Tell userspace the scan table has been updated */
720 memset(&wrqu, 0, sizeof(union iwreq_data));
721 wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
723 lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
728 clear_selected_scan_list_entries(wlan_adapter * adapter,
729 const struct wlan_ioctl_user_scan_cfg * scan_cfg)
731 struct bss_descriptor * bss;
732 struct bss_descriptor * safe;
733 u32 clear_ssid_flag = 0, clear_bssid_flag = 0;
738 if (scan_cfg->clear_ssid && scan_cfg->ssid_len)
741 if (scan_cfg->clear_bssid
742 && (compare_ether_addr(scan_cfg->bssid, &zeromac[0]) != 0)
743 && (compare_ether_addr(scan_cfg->bssid, &bcastmac[0]) != 0)) {
744 clear_bssid_flag = 1;
747 if (!clear_ssid_flag && !clear_bssid_flag)
750 mutex_lock(&adapter->lock);
751 list_for_each_entry_safe (bss, safe, &adapter->network_list, list) {
754 /* Check for an SSID match */
756 && (bss->ssid.ssidlength == scan_cfg->ssid_len)
757 && !memcmp(bss->ssid.ssid, scan_cfg->ssid, bss->ssid.ssidlength))
760 /* Check for a BSSID match */
761 if ( clear_bssid_flag
762 && !compare_ether_addr(bss->bssid, scan_cfg->bssid))
766 list_move_tail (&bss->list, &adapter->network_free_list);
767 clear_bss_descriptor(bss);
770 mutex_unlock(&adapter->lock);
775 * @brief Internal function used to start a scan based on an input config
777 * Use the input user scan configuration information when provided in
778 * order to send the appropriate scan commands to firmware to populate or
779 * update the internal driver scan table
781 * @param priv A pointer to wlan_private structure
782 * @param puserscanin Pointer to the input configuration for the requested
785 * @return 0 or < 0 if error
787 int wlan_scan_networks(wlan_private * priv,
788 const struct wlan_ioctl_user_scan_cfg * puserscanin,
791 wlan_adapter * adapter = priv->adapter;
792 struct mrvlietypes_chanlistparamset *pchantlvout;
793 struct chanscanparamset * scan_chan_list = NULL;
794 struct wlan_scan_cmd_config * scan_cfg = NULL;
796 u8 scancurrentchanonly;
800 lbs_deb_enter(LBS_DEB_ASSOC);
802 scan_chan_list = kzalloc(sizeof(struct chanscanparamset) *
803 WLAN_IOCTL_USER_SCAN_CHAN_MAX, GFP_KERNEL);
804 if (scan_chan_list == NULL) {
809 scan_cfg = wlan_scan_setup_scan_config(priv,
815 &scancurrentchanonly);
816 if (scan_cfg == NULL) {
821 clear_selected_scan_list_entries(adapter, puserscanin);
823 /* Keep the data path active if we are only scanning our current channel */
824 if (!scancurrentchanonly) {
825 netif_stop_queue(priv->dev);
826 netif_carrier_off(priv->dev);
827 netif_stop_queue(priv->mesh_dev);
828 netif_carrier_off(priv->mesh_dev);
831 ret = wlan_scan_channel_list(priv,
840 /* Process the resulting scan table:
841 * - Remove any bad ssids
842 * - Update our current BSS information from scan data
844 wlan_scan_process_results(priv);
846 if (priv->adapter->connect_status == libertas_connected) {
847 netif_carrier_on(priv->dev);
848 netif_wake_queue(priv->dev);
849 netif_carrier_on(priv->mesh_dev);
850 netif_wake_queue(priv->mesh_dev);
858 kfree(scan_chan_list);
860 lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
865 * @brief Inspect the scan response buffer for pointers to expected TLVs
867 * TLVs can be included at the end of the scan response BSS information.
868 * Parse the data in the buffer for pointers to TLVs that can potentially
869 * be passed back in the response
871 * @param ptlv Pointer to the start of the TLV buffer to parse
872 * @param tlvbufsize size of the TLV buffer
873 * @param ptsftlv Output parameter: Pointer to the TSF TLV if found
878 void wlan_ret_802_11_scan_get_tlv_ptrs(struct mrvlietypes_data * ptlv,
880 struct mrvlietypes_tsftimestamp ** ptsftlv)
882 struct mrvlietypes_data *pcurrenttlv;
888 tlvbufleft = tlvbufsize;
891 lbs_deb_scan("SCAN_RESP: tlvbufsize = %d\n", tlvbufsize);
892 lbs_dbg_hex("SCAN_RESP: TLV Buf", (u8 *) ptlv, tlvbufsize);
894 while (tlvbufleft >= sizeof(struct mrvlietypesheader)) {
895 tlvtype = le16_to_cpu(pcurrenttlv->header.type);
896 tlvlen = le16_to_cpu(pcurrenttlv->header.len);
899 case TLV_TYPE_TSFTIMESTAMP:
900 *ptsftlv = (struct mrvlietypes_tsftimestamp *) pcurrenttlv;
904 lbs_deb_scan("SCAN_RESP: Unhandled TLV = %d\n",
906 /* Give up, this seems corrupted */
910 tlvbufleft -= (sizeof(ptlv->header) + tlvlen);
912 (struct mrvlietypes_data *) (pcurrenttlv->Data + tlvlen);
917 * @brief Interpret a BSS scan response returned from the firmware
919 * Parse the various fixed fields and IEs passed back for a a BSS probe
920 * response or beacon from the scan command. Record information as needed
921 * in the scan table struct bss_descriptor for that entry.
923 * @param bss Output parameter: Pointer to the BSS Entry
927 static int libertas_process_bss(struct bss_descriptor * bss,
928 u8 ** pbeaconinfo, int *bytesleft)
930 enum ieeetypes_elementid elemID;
931 struct ieeetypes_fhparamset *pFH;
932 struct ieeetypes_dsparamset *pDS;
933 struct ieeetypes_cfparamset *pCF;
934 struct ieeetypes_ibssparamset *pibss;
935 struct ieeetypes_capinfo *pcap;
936 struct WLAN_802_11_FIXED_IEs fixedie;
944 int bytesleftforcurrentbeacon;
948 const u8 oui01[4] = { 0x00, 0x50, 0xf2, 0x01 };
950 struct ieeetypes_countryinfoset *pcountryinfo;
952 lbs_deb_enter(LBS_DEB_ASSOC);
958 if (*bytesleft >= sizeof(beaconsize)) {
959 /* Extract & convert beacon size from the command buffer */
960 memcpy(&beaconsize, *pbeaconinfo, sizeof(beaconsize));
961 beaconsize = le16_to_cpu(beaconsize);
962 *bytesleft -= sizeof(beaconsize);
963 *pbeaconinfo += sizeof(beaconsize);
966 if (beaconsize == 0 || beaconsize > *bytesleft) {
968 *pbeaconinfo += *bytesleft;
974 /* Initialize the current working beacon pointer for this BSS iteration */
975 pcurrentptr = *pbeaconinfo;
977 /* Advance the return beacon pointer past the current beacon */
978 *pbeaconinfo += beaconsize;
979 *bytesleft -= beaconsize;
981 bytesleftforcurrentbeacon = beaconsize;
983 memcpy(bss->bssid, pcurrentptr, ETH_ALEN);
984 lbs_deb_scan("process_bss: AP BSSID " MAC_FMT "\n", MAC_ARG(bss->bssid));
986 pcurrentptr += ETH_ALEN;
987 bytesleftforcurrentbeacon -= ETH_ALEN;
989 if (bytesleftforcurrentbeacon < 12) {
990 lbs_deb_scan("process_bss: Not enough bytes left\n");
995 * next 4 fields are RSSI, time stamp, beacon interval,
996 * and capability information
999 /* RSSI is 1 byte long */
1000 bss->rssi = le32_to_cpu((long)(*pcurrentptr));
1001 lbs_deb_scan("process_bss: RSSI=%02X\n", *pcurrentptr);
1003 bytesleftforcurrentbeacon -= 1;
1005 /* time stamp is 8 bytes long */
1006 memcpy(fixedie.timestamp, pcurrentptr, 8);
1007 memcpy(bss->timestamp, pcurrentptr, 8);
1009 bytesleftforcurrentbeacon -= 8;
1011 /* beacon interval is 2 bytes long */
1012 memcpy(&fixedie.beaconinterval, pcurrentptr, 2);
1013 bss->beaconperiod = le16_to_cpu(fixedie.beaconinterval);
1015 bytesleftforcurrentbeacon -= 2;
1017 /* capability information is 2 bytes long */
1018 memcpy(&fixedie.capabilities, pcurrentptr, 2);
1019 lbs_deb_scan("process_bss: fixedie.capabilities=0x%X\n",
1020 fixedie.capabilities);
1021 fixedie.capabilities = le16_to_cpu(fixedie.capabilities);
1022 pcap = (struct ieeetypes_capinfo *) & fixedie.capabilities;
1023 memcpy(&bss->cap, pcap, sizeof(struct ieeetypes_capinfo));
1025 bytesleftforcurrentbeacon -= 2;
1027 /* rest of the current buffer are IE's */
1028 lbs_deb_scan("process_bss: IE length for this AP = %d\n",
1029 bytesleftforcurrentbeacon);
1031 lbs_dbg_hex("process_bss: IE info", (u8 *) pcurrentptr,
1032 bytesleftforcurrentbeacon);
1034 if (pcap->privacy) {
1035 lbs_deb_scan("process_bss: AP WEP enabled\n");
1036 bss->privacy = wlan802_11privfilter8021xWEP;
1038 bss->privacy = wlan802_11privfilteracceptall;
1041 if (pcap->ibss == 1) {
1042 bss->mode = IW_MODE_ADHOC;
1044 bss->mode = IW_MODE_INFRA;
1047 /* process variable IE */
1048 while (bytesleftforcurrentbeacon >= 2) {
1049 elemID = (enum ieeetypes_elementid) (*((u8 *) pcurrentptr));
1050 elemlen = *((u8 *) pcurrentptr + 1);
1052 if (bytesleftforcurrentbeacon < elemlen) {
1053 lbs_deb_scan("process_bss: error in processing IE, "
1054 "bytes left < IE length\n");
1055 bytesleftforcurrentbeacon = 0;
1061 bss->ssid.ssidlength = elemlen;
1062 memcpy(bss->ssid.ssid, (pcurrentptr + 2), elemlen);
1063 lbs_deb_scan("ssid '%s'\n", bss->ssid.ssid);
1066 case SUPPORTED_RATES:
1067 memcpy(bss->datarates, (pcurrentptr + 2), elemlen);
1068 memmove(bss->libertas_supported_rates, (pcurrentptr + 2),
1071 founddatarateie = 1;
1075 lbs_deb_scan("process_bss: EXTRA_IE Found!\n");
1079 pFH = (struct ieeetypes_fhparamset *) pcurrentptr;
1080 memmove(&bss->phyparamset.fhparamset, pFH,
1081 sizeof(struct ieeetypes_fhparamset));
1082 bss->phyparamset.fhparamset.dwelltime
1083 = le16_to_cpu(bss->phyparamset.fhparamset.dwelltime);
1087 pDS = (struct ieeetypes_dsparamset *) pcurrentptr;
1088 bss->channel = pDS->currentchan;
1089 memcpy(&bss->phyparamset.dsparamset, pDS,
1090 sizeof(struct ieeetypes_dsparamset));
1094 pCF = (struct ieeetypes_cfparamset *) pcurrentptr;
1095 memcpy(&bss->ssparamset.cfparamset, pCF,
1096 sizeof(struct ieeetypes_cfparamset));
1099 case IBSS_PARAM_SET:
1100 pibss = (struct ieeetypes_ibssparamset *) pcurrentptr;
1101 bss->atimwindow = le32_to_cpu(pibss->atimwindow);
1102 memmove(&bss->ssparamset.ibssparamset, pibss,
1103 sizeof(struct ieeetypes_ibssparamset));
1104 bss->ssparamset.ibssparamset.atimwindow
1105 = le16_to_cpu(bss->ssparamset.ibssparamset.atimwindow);
1108 /* Handle Country Info IE */
1110 pcountryinfo = (struct ieeetypes_countryinfoset *) pcurrentptr;
1111 if (pcountryinfo->len < sizeof(pcountryinfo->countrycode)
1112 || pcountryinfo->len > 254) {
1113 lbs_deb_scan("process_bss: 11D- Err "
1114 "CountryInfo len =%d min=%zd max=254\n",
1116 sizeof(pcountryinfo->countrycode));
1121 memcpy(&bss->countryinfo,
1122 pcountryinfo, pcountryinfo->len + 2);
1123 lbs_dbg_hex("process_bss: 11D- CountryInfo:",
1124 (u8 *) pcountryinfo,
1125 (u32) (pcountryinfo->len + 2));
1128 case EXTENDED_SUPPORTED_RATES:
1130 * only process extended supported rate
1131 * if data rate is already found.
1132 * data rate IE should come before
1133 * extended supported rate IE
1135 if (founddatarateie) {
1136 if ((elemlen + ratesize) > WLAN_SUPPORTED_RATES) {
1138 (WLAN_SUPPORTED_RATES - ratesize);
1140 bytestocopy = elemlen;
1143 pRate = (u8 *) bss->datarates;
1145 memmove(pRate, (pcurrentptr + 2), bytestocopy);
1146 pRate = (u8 *) bss->libertas_supported_rates;
1148 memmove(pRate, (pcurrentptr + 2), bytestocopy);
1152 case VENDOR_SPECIFIC_221:
1153 #define IE_ID_LEN_FIELDS_BYTES 2
1154 pIe = (struct IE_WPA *)pcurrentptr;
1156 if (memcmp(pIe->oui, oui01, sizeof(oui01)))
1159 bss->wpa_ie_len = min(elemlen + IE_ID_LEN_FIELDS_BYTES,
1161 memcpy(bss->wpa_ie, pcurrentptr, bss->wpa_ie_len);
1162 lbs_dbg_hex("process_bss: WPA IE", bss->wpa_ie, elemlen);
1165 pIe = (struct IE_WPA *)pcurrentptr;
1166 bss->rsn_ie_len = min(elemlen + IE_ID_LEN_FIELDS_BYTES,
1168 memcpy(bss->rsn_ie, pcurrentptr, bss->rsn_ie_len);
1169 lbs_dbg_hex("process_bss: RSN_IE", bss->rsn_ie, elemlen);
1174 case CHALLENGE_TEXT:
1178 pcurrentptr += elemlen + 2;
1180 /* need to account for IE ID and IE len */
1181 bytesleftforcurrentbeacon -= (elemlen + 2);
1183 } /* while (bytesleftforcurrentbeacon > 2) */
1186 bss->last_scanned = jiffies;
1191 lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
1196 * @brief Compare two SSIDs
1198 * @param ssid1 A pointer to ssid to compare
1199 * @param ssid2 A pointer to ssid to compare
1201 * @return 0--ssid is same, otherwise is different
1203 int libertas_SSID_cmp(struct WLAN_802_11_SSID *ssid1, struct WLAN_802_11_SSID *ssid2)
1205 if (!ssid1 || !ssid2)
1208 if (ssid1->ssidlength != ssid2->ssidlength)
1211 return memcmp(ssid1->ssid, ssid2->ssid, ssid1->ssidlength);
1215 * @brief This function finds a specific compatible BSSID in the scan list
1217 * @param adapter A pointer to wlan_adapter
1218 * @param bssid BSSID to find in the scan list
1219 * @param mode Network mode: Infrastructure or IBSS
1221 * @return index in BSSID list, or error return code (< 0)
1223 struct bss_descriptor * libertas_find_BSSID_in_list(wlan_adapter * adapter,
1224 u8 * bssid, u8 mode)
1226 struct bss_descriptor * iter_bss;
1227 struct bss_descriptor * found_bss = NULL;
1232 lbs_dbg_hex("libertas_find_BSSID_in_list: looking for ",
1235 /* Look through the scan table for a compatible match. The loop will
1236 * continue past a matched bssid that is not compatible in case there
1237 * is an AP with multiple SSIDs assigned to the same BSSID
1239 mutex_lock(&adapter->lock);
1240 list_for_each_entry (iter_bss, &adapter->network_list, list) {
1241 if (compare_ether_addr(iter_bss->bssid, bssid))
1242 continue; /* bssid doesn't match */
1246 if (!is_network_compatible(adapter, iter_bss, mode))
1248 found_bss = iter_bss;
1251 found_bss = iter_bss;
1255 mutex_unlock(&adapter->lock);
1261 * @brief This function finds ssid in ssid list.
1263 * @param adapter A pointer to wlan_adapter
1264 * @param ssid SSID to find in the list
1265 * @param bssid BSSID to qualify the SSID selection (if provided)
1266 * @param mode Network mode: Infrastructure or IBSS
1268 * @return index in BSSID list
1270 struct bss_descriptor * libertas_find_SSID_in_list(wlan_adapter * adapter,
1271 struct WLAN_802_11_SSID *ssid, u8 * bssid, u8 mode,
1275 struct bss_descriptor * iter_bss = NULL;
1276 struct bss_descriptor * found_bss = NULL;
1277 struct bss_descriptor * tmp_oldest = NULL;
1279 mutex_lock(&adapter->lock);
1281 list_for_each_entry (iter_bss, &adapter->network_list, list) {
1283 || (iter_bss->last_scanned < tmp_oldest->last_scanned))
1284 tmp_oldest = iter_bss;
1286 if (libertas_SSID_cmp(&iter_bss->ssid, ssid) != 0)
1287 continue; /* ssid doesn't match */
1288 if (bssid && compare_ether_addr(iter_bss->bssid, bssid) != 0)
1289 continue; /* bssid doesn't match */
1290 if ((channel > 0) && (iter_bss->channel != channel))
1291 continue; /* channel doesn't match */
1296 if (!is_network_compatible(adapter, iter_bss, mode))
1300 /* Found requested BSSID */
1301 found_bss = iter_bss;
1305 if (SCAN_RSSI(iter_bss->rssi) > bestrssi) {
1306 bestrssi = SCAN_RSSI(iter_bss->rssi);
1307 found_bss = iter_bss;
1312 if (SCAN_RSSI(iter_bss->rssi) > bestrssi) {
1313 bestrssi = SCAN_RSSI(iter_bss->rssi);
1314 found_bss = iter_bss;
1321 mutex_unlock(&adapter->lock);
1326 * @brief This function finds the best SSID in the Scan List
1328 * Search the scan table for the best SSID that also matches the current
1329 * adapter network preference (infrastructure or adhoc)
1331 * @param adapter A pointer to wlan_adapter
1333 * @return index in BSSID list
1335 struct bss_descriptor * libertas_find_best_SSID_in_list(wlan_adapter * adapter,
1339 struct bss_descriptor * iter_bss;
1340 struct bss_descriptor * best_bss = NULL;
1342 mutex_lock(&adapter->lock);
1344 list_for_each_entry (iter_bss, &adapter->network_list, list) {
1348 if (!is_network_compatible(adapter, iter_bss, mode))
1350 if (SCAN_RSSI(iter_bss->rssi) <= bestrssi)
1352 bestrssi = SCAN_RSSI(iter_bss->rssi);
1353 best_bss = iter_bss;
1357 if (SCAN_RSSI(iter_bss->rssi) <= bestrssi)
1359 bestrssi = SCAN_RSSI(iter_bss->rssi);
1360 best_bss = iter_bss;
1365 mutex_unlock(&adapter->lock);
1370 * @brief Find the AP with specific ssid in the scan list
1372 * @param priv A pointer to wlan_private structure
1373 * @param pSSID A pointer to AP's ssid
1375 * @return 0--success, otherwise--fail
1377 int libertas_find_best_network_SSID(wlan_private * priv,
1378 struct WLAN_802_11_SSID *ssid,
1379 u8 preferred_mode, u8 *out_mode)
1381 wlan_adapter *adapter = priv->adapter;
1383 struct bss_descriptor * found;
1385 lbs_deb_enter(LBS_DEB_ASSOC);
1387 memset(ssid, 0, sizeof(struct WLAN_802_11_SSID));
1389 wlan_scan_networks(priv, NULL, 1);
1390 if (adapter->surpriseremoved)
1393 wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending);
1395 found = libertas_find_best_SSID_in_list(adapter, preferred_mode);
1396 if (found && (found->ssid.ssidlength > 0)) {
1397 memcpy(ssid, &found->ssid, sizeof(struct WLAN_802_11_SSID));
1398 *out_mode = found->mode;
1402 lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
1407 * @brief Scan Network
1409 * @param dev A pointer to net_device structure
1410 * @param info A pointer to iw_request_info structure
1411 * @param vwrq A pointer to iw_param structure
1412 * @param extra A pointer to extra data buf
1414 * @return 0 --success, otherwise fail
1416 int libertas_set_scan(struct net_device *dev, struct iw_request_info *info,
1417 struct iw_param *vwrq, char *extra)
1419 wlan_private *priv = dev->priv;
1420 wlan_adapter *adapter = priv->adapter;
1422 lbs_deb_enter(LBS_DEB_SCAN);
1424 wlan_scan_networks(priv, NULL, 0);
1426 if (adapter->surpriseremoved)
1429 lbs_deb_leave(LBS_DEB_SCAN);
1434 * @brief Send a scan command for all available channels filtered on a spec
1436 * @param priv A pointer to wlan_private structure
1437 * @param prequestedssid A pointer to AP's ssid
1438 * @param keeppreviousscan Flag used to save/clear scan table before scan
1440 * @return 0-success, otherwise fail
1442 int libertas_send_specific_SSID_scan(wlan_private * priv,
1443 struct WLAN_802_11_SSID *prequestedssid,
1446 wlan_adapter *adapter = priv->adapter;
1447 struct wlan_ioctl_user_scan_cfg scancfg;
1450 lbs_deb_enter(LBS_DEB_ASSOC);
1452 if (prequestedssid == NULL)
1455 memset(&scancfg, 0x00, sizeof(scancfg));
1456 memcpy(scancfg.ssid, prequestedssid->ssid, prequestedssid->ssidlength);
1457 scancfg.ssid_len = prequestedssid->ssidlength;
1458 scancfg.clear_ssid = clear_ssid;
1460 wlan_scan_networks(priv, &scancfg, 1);
1461 if (adapter->surpriseremoved)
1463 wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending);
1466 lbs_deb_leave(LBS_DEB_ASSOC);
1471 * @brief scan an AP with specific BSSID
1473 * @param priv A pointer to wlan_private structure
1474 * @param bssid A pointer to AP's bssid
1475 * @param keeppreviousscan Flag used to save/clear scan table before scan
1477 * @return 0-success, otherwise fail
1479 int libertas_send_specific_BSSID_scan(wlan_private * priv, u8 * bssid, u8 clear_bssid)
1481 struct wlan_ioctl_user_scan_cfg scancfg;
1483 lbs_deb_enter(LBS_DEB_ASSOC);
1488 memset(&scancfg, 0x00, sizeof(scancfg));
1489 memcpy(scancfg.bssid, bssid, ETH_ALEN);
1490 scancfg.clear_bssid = clear_bssid;
1492 wlan_scan_networks(priv, &scancfg, 1);
1493 if (priv->adapter->surpriseremoved)
1495 wait_event_interruptible(priv->adapter->cmd_pending,
1496 !priv->adapter->nr_cmd_pending);
1499 lbs_deb_leave(LBS_DEB_ASSOC);
1503 static inline char *libertas_translate_scan(wlan_private *priv,
1504 char *start, char *stop,
1505 struct bss_descriptor *bss)
1507 wlan_adapter *adapter = priv->adapter;
1508 struct chan_freq_power *cfp;
1509 char *current_val; /* For rates */
1510 struct iw_event iwe; /* Temporary buffer */
1512 #define PERFECT_RSSI ((u8)50)
1513 #define WORST_RSSI ((u8)0)
1514 #define RSSI_DIFF ((u8)(PERFECT_RSSI - WORST_RSSI))
1517 cfp = libertas_find_cfp_by_band_and_channel(adapter, 0, bss->channel);
1519 lbs_deb_scan("Invalid channel number %d\n", bss->channel);
1523 /* First entry *MUST* be the AP BSSID */
1524 iwe.cmd = SIOCGIWAP;
1525 iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
1526 memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN);
1527 start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN);
1530 iwe.cmd = SIOCGIWESSID;
1531 iwe.u.data.flags = 1;
1532 iwe.u.data.length = min(bss->ssid.ssidlength, (u32) IW_ESSID_MAX_SIZE);
1533 start = iwe_stream_add_point(start, stop, &iwe, bss->ssid.ssid);
1536 iwe.cmd = SIOCGIWMODE;
1537 iwe.u.mode = bss->mode;
1538 start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN);
1541 iwe.cmd = SIOCGIWFREQ;
1542 iwe.u.freq.m = (long)cfp->freq * 100000;
1544 start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
1546 /* Add quality statistics */
1548 iwe.u.qual.updated = IW_QUAL_ALL_UPDATED;
1549 iwe.u.qual.level = SCAN_RSSI(bss->rssi);
1551 rssi = iwe.u.qual.level - MRVDRV_NF_DEFAULT_SCAN_VALUE;
1553 (100 * RSSI_DIFF * RSSI_DIFF - (PERFECT_RSSI - rssi) *
1554 (15 * (RSSI_DIFF) + 62 * (PERFECT_RSSI - rssi))) /
1555 (RSSI_DIFF * RSSI_DIFF);
1556 if (iwe.u.qual.qual > 100)
1557 iwe.u.qual.qual = 100;
1559 if (adapter->NF[TYPE_BEACON][TYPE_NOAVG] == 0) {
1560 iwe.u.qual.noise = MRVDRV_NF_DEFAULT_SCAN_VALUE;
1563 CAL_NF(adapter->NF[TYPE_BEACON][TYPE_NOAVG]);
1566 /* Locally created ad-hoc BSSs won't have beacons if this is the
1567 * only station in the adhoc network; so get signal strength
1568 * from receive statistics.
1570 if ((adapter->mode == IW_MODE_ADHOC)
1571 && adapter->adhoccreate
1572 && !libertas_SSID_cmp(&adapter->curbssparams.ssid, &bss->ssid)) {
1574 snr = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
1575 nf = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
1576 iwe.u.qual.level = CAL_RSSI(snr, nf);
1578 start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
1580 /* Add encryption capability */
1581 iwe.cmd = SIOCGIWENCODE;
1583 iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
1585 iwe.u.data.flags = IW_ENCODE_DISABLED;
1587 iwe.u.data.length = 0;
1588 start = iwe_stream_add_point(start, stop, &iwe, bss->ssid.ssid);
1590 current_val = start + IW_EV_LCP_LEN;
1592 iwe.cmd = SIOCGIWRATE;
1593 iwe.u.bitrate.fixed = 0;
1594 iwe.u.bitrate.disabled = 0;
1595 iwe.u.bitrate.value = 0;
1597 for (j = 0; j < sizeof(bss->libertas_supported_rates); j++) {
1598 u8 rate = bss->libertas_supported_rates[j];
1600 break; /* no more rates */
1601 /* Bit rate given in 500 kb/s units (+ 0x80) */
1602 iwe.u.bitrate.value = (rate & 0x7f) * 500000;
1603 current_val = iwe_stream_add_value(start, current_val,
1604 stop, &iwe, IW_EV_PARAM_LEN);
1606 if ((bss->mode == IW_MODE_ADHOC)
1607 && !libertas_SSID_cmp(&adapter->curbssparams.ssid, &bss->ssid)
1608 && adapter->adhoccreate) {
1609 iwe.u.bitrate.value = 22 * 500000;
1610 current_val = iwe_stream_add_value(start, current_val,
1611 stop, &iwe, IW_EV_PARAM_LEN);
1613 /* Check if we added any event */
1614 if((current_val - start) > IW_EV_LCP_LEN)
1615 start = current_val;
1617 memset(&iwe, 0, sizeof(iwe));
1618 if (bss->wpa_ie_len) {
1619 char buf[MAX_WPA_IE_LEN];
1620 memcpy(buf, bss->wpa_ie, bss->wpa_ie_len);
1621 iwe.cmd = IWEVGENIE;
1622 iwe.u.data.length = bss->wpa_ie_len;
1623 start = iwe_stream_add_point(start, stop, &iwe, buf);
1626 memset(&iwe, 0, sizeof(iwe));
1627 if (bss->rsn_ie_len) {
1628 char buf[MAX_WPA_IE_LEN];
1629 memcpy(buf, bss->rsn_ie, bss->rsn_ie_len);
1630 iwe.cmd = IWEVGENIE;
1631 iwe.u.data.length = bss->rsn_ie_len;
1632 start = iwe_stream_add_point(start, stop, &iwe, buf);
1639 * @brief Retrieve the scan table entries via wireless tools IOCTL call
1641 * @param dev A pointer to net_device structure
1642 * @param info A pointer to iw_request_info structure
1643 * @param dwrq A pointer to iw_point structure
1644 * @param extra A pointer to extra data buf
1646 * @return 0 --success, otherwise fail
1648 int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
1649 struct iw_point *dwrq, char *extra)
1651 #define SCAN_ITEM_SIZE 128
1652 wlan_private *priv = dev->priv;
1653 wlan_adapter *adapter = priv->adapter;
1656 char *stop = ev + dwrq->length;
1657 struct bss_descriptor * iter_bss;
1658 struct bss_descriptor * safe;
1660 lbs_deb_enter(LBS_DEB_ASSOC);
1662 /* If we've got an uncompleted scan, schedule the next part */
1663 if (!adapter->nr_cmd_pending && adapter->last_scanned_channel)
1664 wlan_scan_networks(priv, NULL, 0);
1666 /* Update RSSI if current BSS is a locally created ad-hoc BSS */
1667 if ((adapter->mode == IW_MODE_ADHOC) && adapter->adhoccreate) {
1668 libertas_prepare_and_send_command(priv, cmd_802_11_rssi, 0,
1669 cmd_option_waitforrsp, 0, NULL);
1672 mutex_lock(&adapter->lock);
1673 list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) {
1675 unsigned long stale_time;
1677 if (stop - ev < SCAN_ITEM_SIZE) {
1682 /* Prune old an old scan result */
1683 stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE;
1684 if (time_after(jiffies, stale_time)) {
1685 list_move_tail (&iter_bss->list,
1686 &adapter->network_free_list);
1687 clear_bss_descriptor(iter_bss);
1691 /* Translate to WE format this entry */
1692 next_ev = libertas_translate_scan(priv, ev, stop, iter_bss);
1693 if (next_ev == NULL)
1697 mutex_unlock(&adapter->lock);
1699 dwrq->length = (ev - extra);
1702 lbs_deb_leave(LBS_DEB_ASSOC);
1707 * @brief Prepare a scan command to be sent to the firmware
1709 * Use the wlan_scan_cmd_config sent to the command processing module in
1710 * the libertas_prepare_and_send_command to configure a cmd_ds_802_11_scan command
1711 * struct to send to firmware.
1713 * The fixed fields specifying the BSS type and BSSID filters as well as a
1714 * variable number/length of TLVs are sent in the command to firmware.
1716 * @param priv A pointer to wlan_private structure
1717 * @param cmd A pointer to cmd_ds_command structure to be sent to
1718 * firmware with the cmd_DS_801_11_SCAN structure
1719 * @param pdata_buf Void pointer cast of a wlan_scan_cmd_config struct used
1720 * to set the fields/TLVs for the command sent to firmware
1724 * @sa wlan_scan_create_channel_list
1726 int libertas_cmd_80211_scan(wlan_private * priv,
1727 struct cmd_ds_command *cmd, void *pdata_buf)
1729 struct cmd_ds_802_11_scan *pscan = &cmd->params.scan;
1730 struct wlan_scan_cmd_config *pscancfg;
1732 lbs_deb_enter(LBS_DEB_ASSOC);
1734 pscancfg = pdata_buf;
1736 /* Set fixed field variables in scan command */
1737 pscan->bsstype = pscancfg->bsstype;
1738 memcpy(pscan->BSSID, pscancfg->bssid, sizeof(pscan->BSSID));
1739 memcpy(pscan->tlvbuffer, pscancfg->tlvbuffer, pscancfg->tlvbufferlen);
1741 cmd->command = cpu_to_le16(cmd_802_11_scan);
1743 /* size is equal to the sizeof(fixed portions) + the TLV len + header */
1744 cmd->size = cpu_to_le16(sizeof(pscan->bsstype)
1745 + sizeof(pscan->BSSID)
1746 + pscancfg->tlvbufferlen + S_DS_GEN);
1748 lbs_deb_scan("SCAN_CMD: command=%x, size=%x, seqnum=%x\n",
1749 cmd->command, cmd->size, cmd->seqnum);
1751 lbs_deb_leave(LBS_DEB_ASSOC);
1755 static inline int is_same_network(struct bss_descriptor *src,
1756 struct bss_descriptor *dst)
1758 /* A network is only a duplicate if the channel, BSSID, and ESSID
1759 * all match. We treat all <hidden> with the same BSSID and channel
1761 return ((src->ssid.ssidlength == dst->ssid.ssidlength) &&
1762 (src->channel == dst->channel) &&
1763 !compare_ether_addr(src->bssid, dst->bssid) &&
1764 !memcmp(src->ssid.ssid, dst->ssid.ssid, src->ssid.ssidlength));
1768 * @brief This function handles the command response of scan
1770 * The response buffer for the scan command has the following
1773 * .-----------------------------------------------------------.
1774 * | header (4 * sizeof(u16)): Standard command response hdr |
1775 * .-----------------------------------------------------------.
1776 * | bufsize (u16) : sizeof the BSS Description data |
1777 * .-----------------------------------------------------------.
1778 * | NumOfSet (u8) : Number of BSS Descs returned |
1779 * .-----------------------------------------------------------.
1780 * | BSSDescription data (variable, size given in bufsize) |
1781 * .-----------------------------------------------------------.
1782 * | TLV data (variable, size calculated using header->size, |
1783 * | bufsize and sizeof the fixed fields above) |
1784 * .-----------------------------------------------------------.
1786 * @param priv A pointer to wlan_private structure
1787 * @param resp A pointer to cmd_ds_command
1791 int libertas_ret_80211_scan(wlan_private * priv, struct cmd_ds_command *resp)
1793 wlan_adapter *adapter = priv->adapter;
1794 struct cmd_ds_802_11_scan_rsp *pscan;
1795 struct mrvlietypes_data *ptlv;
1796 struct mrvlietypes_tsftimestamp *ptsftlv;
1797 struct bss_descriptor * iter_bss;
1798 struct bss_descriptor * safe;
1807 lbs_deb_enter(LBS_DEB_ASSOC);
1809 /* Prune old entries from scan table */
1810 list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) {
1811 unsigned long stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE;
1812 if (time_before(jiffies, stale_time))
1814 list_move_tail (&iter_bss->list, &adapter->network_free_list);
1815 clear_bss_descriptor(iter_bss);
1818 pscan = &resp->params.scanresp;
1820 if (pscan->nr_sets > MAX_NETWORK_COUNT) {
1822 "SCAN_RESP: too many scan results (%d, max %d)!!\n",
1823 pscan->nr_sets, MAX_NETWORK_COUNT);
1828 bytesleft = le16_to_cpu(pscan->bssdescriptsize);
1829 lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft);
1831 scanrespsize = le16_to_cpu(resp->size);
1832 lbs_deb_scan("SCAN_RESP: returned %d AP before parsing\n",
1835 pbssinfo = pscan->bssdesc_and_tlvbuffer;
1837 /* The size of the TLV buffer is equal to the entire command response
1838 * size (scanrespsize) minus the fixed fields (sizeof()'s), the
1839 * BSS Descriptions (bssdescriptsize as bytesLef) and the command
1840 * response header (S_DS_GEN)
1842 tlvbufsize = scanrespsize - (bytesleft + sizeof(pscan->bssdescriptsize)
1843 + sizeof(pscan->nr_sets)
1846 ptlv = (struct mrvlietypes_data *) (pscan->bssdesc_and_tlvbuffer + bytesleft);
1848 /* Search the TLV buffer space in the scan response for any valid TLVs */
1849 wlan_ret_802_11_scan_get_tlv_ptrs(ptlv, tlvbufsize, &ptsftlv);
1852 * Process each scan response returned (pscan->nr_sets). Save
1853 * the information in the newbssentry and then insert into the
1854 * driver scan table either as an update to an existing entry
1855 * or as an addition at the end of the table
1857 for (idx = 0; idx < pscan->nr_sets && bytesleft; idx++) {
1858 struct bss_descriptor new;
1859 struct bss_descriptor * found = NULL;
1860 struct bss_descriptor * iter_bss = NULL;
1861 struct bss_descriptor * oldest = NULL;
1863 /* Process the data fields and IEs returned for this BSS */
1864 memset(&new, 0, sizeof (struct bss_descriptor));
1865 if (libertas_process_bss(&new, &pbssinfo, &bytesleft) != 0) {
1866 /* error parsing the scan response, skipped */
1867 lbs_deb_scan("SCAN_RESP: process_bss returned ERROR\n");
1871 /* Try to find this bss in the scan table */
1872 list_for_each_entry (iter_bss, &adapter->network_list, list) {
1873 if (is_same_network(iter_bss, &new)) {
1878 if ((oldest == NULL) ||
1879 (iter_bss->last_scanned < oldest->last_scanned))
1884 /* found, clear it */
1885 clear_bss_descriptor(found);
1886 } else if (!list_empty(&adapter->network_free_list)) {
1887 /* Pull one from the free list */
1888 found = list_entry(adapter->network_free_list.next,
1889 struct bss_descriptor, list);
1890 list_move_tail(&found->list, &adapter->network_list);
1891 } else if (oldest) {
1892 /* If there are no more slots, expire the oldest */
1894 clear_bss_descriptor(found);
1895 list_move_tail(&found->list, &adapter->network_list);
1900 lbs_deb_scan("SCAN_RESP: BSSID = " MAC_FMT "\n",
1901 new.bssid[0], new.bssid[1], new.bssid[2],
1902 new.bssid[3], new.bssid[4], new.bssid[5]);
1905 * If the TSF TLV was appended to the scan results, save the
1906 * this entries TSF value in the networktsf field. The
1907 * networktsf is the firmware's TSF value at the time the
1908 * beacon or probe response was received.
1911 memcpy(&tsfval, &ptsftlv->tsftable[idx], sizeof(tsfval));
1912 tsfval = le64_to_cpu(tsfval);
1913 memcpy(&new.networktsf, &tsfval, sizeof(new.networktsf));
1916 /* Copy the locally created newbssentry to the scan table */
1917 memcpy(found, &new, offsetof(struct bss_descriptor, list));
1923 lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);