[PATCH] libertas: updated mesh commands for 5.220.9.p11
[safe/jmp/linux-2.6] / drivers / net / wireless / libertas / host.h
1 /**
2   * This file contains definitions of WLAN commands.
3   */
4
5 #ifndef _HOST_H_
6 #define _HOST_H_
7
8 /** PUBLIC DEFINITIONS */
9 #define DEFAULT_AD_HOC_CHANNEL       6
10 #define DEFAULT_AD_HOC_CHANNEL_A    36
11
12 /** IEEE 802.11 oids */
13 #define OID_802_11_SSID                       0x00008002
14 #define OID_802_11_INFRASTRUCTURE_MODE        0x00008008
15 #define OID_802_11_FRAGMENTATION_THRESHOLD    0x00008009
16 #define OID_802_11_RTS_THRESHOLD              0x0000800A
17 #define OID_802_11_TX_ANTENNA_SELECTED        0x0000800D
18 #define OID_802_11_SUPPORTED_RATES            0x0000800E
19 #define OID_802_11_STATISTICS                 0x00008012
20 #define OID_802_11_TX_RETRYCOUNT              0x0000801D
21 #define OID_802_11D_ENABLE                    0x00008020
22
23 #define cmd_option_waitforrsp             0x0002
24
25 /** Host command ID */
26 #define cmd_code_dnld                 0x0002
27 #define cmd_get_hw_spec               0x0003
28 #define cmd_eeprom_update             0x0004
29 #define cmd_802_11_reset              0x0005
30 #define cmd_802_11_scan               0x0006
31 #define cmd_802_11_get_log            0x000b
32 #define cmd_mac_multicast_adr         0x0010
33 #define cmd_802_11_authenticate       0x0011
34 #define cmd_802_11_eeprom_access      0x0059
35 #define cmd_802_11_associate          0x0050
36 #define cmd_802_11_set_wep            0x0013
37 #define cmd_802_11_get_stat           0x0014
38 #define cmd_802_3_get_stat            0x0015
39 #define cmd_802_11_snmp_mib           0x0016
40 #define cmd_mac_reg_map               0x0017
41 #define cmd_bbp_reg_map               0x0018
42 #define cmd_mac_reg_access            0x0019
43 #define cmd_bbp_reg_access            0x001a
44 #define cmd_rf_reg_access             0x001b
45 #define cmd_802_11_radio_control      0x001c
46 #define cmd_802_11_rf_channel         0x001d
47 #define cmd_802_11_rf_tx_power        0x001e
48 #define cmd_802_11_rssi               0x001f
49 #define cmd_802_11_rf_antenna         0x0020
50
51 #define cmd_802_11_ps_mode            0x0021
52
53 #define cmd_802_11_data_rate          0x0022
54 #define cmd_rf_reg_map                0x0023
55 #define cmd_802_11_deauthenticate     0x0024
56 #define cmd_802_11_reassociate        0x0025
57 #define cmd_802_11_disassociate       0x0026
58 #define cmd_mac_control               0x0028
59 #define cmd_802_11_ad_hoc_start       0x002b
60 #define cmd_802_11_ad_hoc_join        0x002c
61
62 #define cmd_802_11_query_tkip_reply_cntrs  0x002e
63 #define cmd_802_11_enable_rsn              0x002f
64 #define cmd_802_11_pairwise_tsc       0x0036
65 #define cmd_802_11_group_tsc          0x0037
66 #define cmd_802_11_key_material       0x005e
67
68 #define cmd_802_11_set_afc            0x003c
69 #define cmd_802_11_get_afc            0x003d
70
71 #define cmd_802_11_ad_hoc_stop        0x0040
72
73 #define cmd_802_11_beacon_stop        0x0049
74
75 #define cmd_802_11_mac_address        0x004D
76 #define cmd_802_11_eeprom_access      0x0059
77
78 #define cmd_802_11_band_config        0x0058
79
80 #define cmd_802_11d_domain_info       0x005b
81
82 #define cmd_802_11_sleep_params          0x0066
83
84 #define cmd_802_11_inactivity_timeout    0x0067
85
86 #define cmd_802_11_tpc_cfg               0x0072
87 #define cmd_802_11_pwr_cfg               0x0073
88
89 #define cmd_802_11_led_gpio_ctrl         0x004e
90
91 #define cmd_802_11_subscribe_event       0x0075
92
93 #define cmd_802_11_rate_adapt_rateset    0x0076
94
95 #define cmd_802_11_tx_rate_query        0x007f
96
97 #define cmd_get_tsf                      0x0080
98
99 #define cmd_bt_access                 0x0087
100 #define cmd_ret_bt_access                 0x8087
101
102 #define cmd_fwt_access                0x0095
103 #define cmd_ret_fwt_access                0x8095
104
105 #define cmd_mesh_access               0x009b
106 #define cmd_ret_mesh_access               0x809b
107
108 /* For the IEEE Power Save */
109 #define cmd_subcmd_enter_ps               0x0030
110 #define cmd_subcmd_exit_ps                0x0031
111 #define cmd_subcmd_sleep_confirmed        0x0034
112 #define cmd_subcmd_full_powerdown         0x0035
113 #define cmd_subcmd_full_powerup           0x0036
114
115 /* command RET code, MSB is set to 1 */
116 #define cmd_ret_hw_spec_info              0x8003
117 #define cmd_ret_eeprom_update             0x8004
118 #define cmd_ret_802_11_reset              0x8005
119 #define cmd_ret_802_11_scan               0x8006
120 #define cmd_ret_802_11_get_log            0x800b
121 #define cmd_ret_mac_control               0x8028
122 #define cmd_ret_mac_multicast_adr         0x8010
123 #define cmd_ret_802_11_authenticate       0x8011
124 #define cmd_ret_802_11_deauthenticate     0x8024
125 #define cmd_ret_802_11_associate          0x8012
126 #define cmd_ret_802_11_reassociate        0x8025
127 #define cmd_ret_802_11_disassociate       0x8026
128 #define cmd_ret_802_11_set_wep            0x8013
129 #define cmd_ret_802_11_stat               0x8014
130 #define cmd_ret_802_3_stat                0x8015
131 #define cmd_ret_802_11_snmp_mib           0x8016
132 #define cmd_ret_mac_reg_map               0x8017
133 #define cmd_ret_bbp_reg_map               0x8018
134 #define cmd_ret_rf_reg_map                0x8023
135 #define cmd_ret_mac_reg_access            0x8019
136 #define cmd_ret_bbp_reg_access            0x801a
137 #define cmd_ret_rf_reg_access             0x801b
138 #define cmd_ret_802_11_radio_control      0x801c
139 #define cmd_ret_802_11_rf_channel         0x801d
140 #define cmd_ret_802_11_rssi               0x801f
141 #define cmd_ret_802_11_rf_tx_power        0x801e
142 #define cmd_ret_802_11_rf_antenna         0x8020
143 #define cmd_ret_802_11_ps_mode            0x8021
144 #define cmd_ret_802_11_data_rate          0x8022
145
146 #define cmd_ret_802_11_ad_hoc_start       0x802B
147 #define cmd_ret_802_11_ad_hoc_join        0x802C
148
149 #define cmd_ret_802_11_query_tkip_reply_cntrs  0x802e
150 #define cmd_ret_802_11_enable_rsn              0x802f
151 #define cmd_ret_802_11_pairwise_tsc       0x8036
152 #define cmd_ret_802_11_group_tsc          0x8037
153 #define cmd_ret_802_11_key_material       0x805e
154
155 #define cmd_enable_rsn                    0x0001
156 #define cmd_disable_rsn                   0x0000
157
158 #define cmd_act_set                       0x0001
159 #define cmd_act_get                       0x0000
160
161 #define cmd_act_get_AES                   (cmd_act_get + 2)
162 #define cmd_act_set_AES                   (cmd_act_set + 2)
163 #define cmd_act_remove_aes                (cmd_act_set + 3)
164
165 #define cmd_ret_802_11_set_afc            0x803c
166 #define cmd_ret_802_11_get_afc            0x803d
167
168 #define cmd_ret_802_11_ad_hoc_stop        0x8040
169
170 #define cmd_ret_802_11_beacon_stop        0x8049
171
172 #define cmd_ret_802_11_mac_address        0x804D
173 #define cmd_ret_802_11_eeprom_access      0x8059
174
175 #define cmd_ret_802_11_band_config        0x8058
176
177 #define cmd_ret_802_11_sleep_params          0x8066
178
179 #define cmd_ret_802_11_inactivity_timeout    0x8067
180
181 #define cmd_ret_802_11d_domain_info      (0x8000 |                  \
182                                               cmd_802_11d_domain_info)
183
184 #define cmd_ret_802_11_tpc_cfg        (cmd_802_11_tpc_cfg | 0x8000)
185 #define cmd_ret_802_11_pwr_cfg        (cmd_802_11_pwr_cfg | 0x8000)
186
187 #define cmd_ret_802_11_led_gpio_ctrl     0x804e
188
189 #define cmd_ret_802_11_subscribe_event  (cmd_802_11_subscribe_event | 0x8000)
190
191 #define cmd_ret_802_11_rate_adapt_rateset       (cmd_802_11_rate_adapt_rateset | 0x8000)
192
193 #define cmd_rte_802_11_tx_rate_query    (cmd_802_11_tx_rate_query | 0x8000)
194
195 #define cmd_ret_get_tsf             0x8080
196
197 /* Define action or option for cmd_802_11_set_wep */
198 #define cmd_act_add                         0x0002
199 #define cmd_act_remove                      0x0004
200 #define cmd_act_use_default                 0x0008
201
202 #define cmd_type_wep_40_bit                 0x0001
203 #define cmd_type_wep_104_bit                0x0002
204
205 #define cmd_NUM_OF_WEP_KEYS                 4
206
207 #define cmd_WEP_KEY_INDEX_MASK              0x3fff
208
209 /* Define action or option for cmd_802_11_reset */
210 #define cmd_act_halt                        0x0003
211
212 /* Define action or option for cmd_802_11_scan */
213 #define cmd_bss_type_bss                    0x0001
214 #define cmd_bss_type_ibss                   0x0002
215 #define cmd_bss_type_any                    0x0003
216
217 /* Define action or option for cmd_802_11_scan */
218 #define cmd_scan_type_active                0x0000
219 #define cmd_scan_type_passive               0x0001
220
221 #define cmd_scan_radio_type_bg          0
222
223 #define cmd_scan_probe_delay_time           0
224
225 /* Define action or option for cmd_mac_control */
226 #define cmd_act_mac_rx_on                   0x0001
227 #define cmd_act_mac_tx_on                   0x0002
228 #define cmd_act_mac_loopback_on             0x0004
229 #define cmd_act_mac_wep_enable              0x0008
230 #define cmd_act_mac_int_enable              0x0010
231 #define cmd_act_mac_multicast_enable        0x0020
232 #define cmd_act_mac_broadcast_enable        0x0040
233 #define cmd_act_mac_promiscuous_enable      0x0080
234 #define cmd_act_mac_all_multicast_enable    0x0100
235 #define cmd_act_mac_strict_protection_enable  0x0400
236
237 /* Define action or option for cmd_802_11_radio_control */
238 #define cmd_type_auto_preamble              0x0001
239 #define cmd_type_short_preamble             0x0002
240 #define cmd_type_long_preamble              0x0003
241
242 #define TURN_ON_RF                              0x01
243 #define RADIO_ON                                0x01
244 #define RADIO_OFF                               0x00
245
246 #define SET_AUTO_PREAMBLE                       0x05
247 #define SET_SHORT_PREAMBLE                      0x03
248 #define SET_LONG_PREAMBLE                       0x01
249
250 /* Define action or option for CMD_802_11_RF_CHANNEL */
251 #define cmd_opt_802_11_rf_channel_get       0x00
252 #define cmd_opt_802_11_rf_channel_set       0x01
253
254 /* Define action or option for cmd_802_11_rf_tx_power */
255 #define cmd_act_tx_power_opt_get            0x0000
256 #define cmd_act_tx_power_opt_set_high       0x8007
257 #define cmd_act_tx_power_opt_set_mid        0x8004
258 #define cmd_act_tx_power_opt_set_low        0x8000
259
260 #define cmd_act_tx_power_index_high         0x0007
261 #define cmd_act_tx_power_index_mid          0x0004
262 #define cmd_act_tx_power_index_low          0x0000
263
264 /* Define action or option for cmd_802_11_data_rate */
265 #define cmd_act_set_tx_auto                 0x0000
266 #define cmd_act_set_tx_fix_rate             0x0001
267 #define cmd_act_get_tx_rate                 0x0002
268
269 #define cmd_act_set_rx                      0x0001
270 #define cmd_act_set_tx                      0x0002
271 #define cmd_act_set_both                    0x0003
272 #define cmd_act_get_rx                      0x0004
273 #define cmd_act_get_tx                      0x0008
274 #define cmd_act_get_both                    0x000c
275
276 /* Define action or option for cmd_802_11_ps_mode */
277 #define cmd_type_cam                        0x0000
278 #define cmd_type_max_psp                    0x0001
279 #define cmd_type_fast_psp                   0x0002
280
281 /* Define action or option for cmd_bt_access */
282 enum cmd_bt_access_opts {
283         /* The bt commands start at 5 instead of 1 because the old dft commands
284          * are mapped to 1-4.  These old commands are no longer maintained and
285          * should not be called.
286          */
287         cmd_act_bt_access_add = 5,
288         cmd_act_bt_access_del,
289         cmd_act_bt_access_list,
290         cmd_act_bt_access_reset,
291         cmd_act_bt_access_set_invert,
292         cmd_act_bt_access_get_invert
293 };
294
295 /* Define action or option for cmd_fwt_access */
296 enum cmd_fwt_access_opts {
297         cmd_act_fwt_access_add = 1,
298         cmd_act_fwt_access_del,
299         cmd_act_fwt_access_lookup,
300         cmd_act_fwt_access_list,
301         cmd_act_fwt_access_list_route,
302         cmd_act_fwt_access_list_neighbor,
303         cmd_act_fwt_access_reset,
304         cmd_act_fwt_access_cleanup,
305         cmd_act_fwt_access_time,
306 };
307
308 /* Define action or option for cmd_mesh_access */
309 enum cmd_mesh_access_opts {
310         cmd_act_mesh_get_ttl = 1,
311         cmd_act_mesh_set_ttl,
312         cmd_act_mesh_get_stats,
313         cmd_act_mesh_get_mpp,
314         cmd_act_mesh_set_mpp,
315 };
316
317 /** Card Event definition */
318 #define MACREG_INT_CODE_TX_PPA_FREE             0x00000000
319 #define MACREG_INT_CODE_TX_DMA_DONE             0x00000001
320 #define MACREG_INT_CODE_LINK_LOSE_W_SCAN        0x00000002
321 #define MACREG_INT_CODE_LINK_LOSE_NO_SCAN       0x00000003
322 #define MACREG_INT_CODE_LINK_SENSED             0x00000004
323 #define MACREG_INT_CODE_CMD_FINISHED            0x00000005
324 #define MACREG_INT_CODE_MIB_CHANGED             0x00000006
325 #define MACREG_INT_CODE_INIT_DONE               0x00000007
326 #define MACREG_INT_CODE_DEAUTHENTICATED         0x00000008
327 #define MACREG_INT_CODE_DISASSOCIATED           0x00000009
328 #define MACREG_INT_CODE_PS_AWAKE                0x0000000a
329 #define MACREG_INT_CODE_PS_SLEEP                0x0000000b
330 #define MACREG_INT_CODE_MIC_ERR_MULTICAST       0x0000000d
331 #define MACREG_INT_CODE_MIC_ERR_UNICAST         0x0000000e
332 #define MACREG_INT_CODE_WM_AWAKE                0x0000000f
333 #define MACREG_INT_CODE_ADHOC_BCN_LOST          0x00000011
334 #define MACREG_INT_CODE_RSSI_LOW                0x00000019
335 #define MACREG_INT_CODE_SNR_LOW                 0x0000001a
336 #define MACREG_INT_CODE_MAX_FAIL                0x0000001b
337 #define MACREG_INT_CODE_RSSI_HIGH               0x0000001c
338 #define MACREG_INT_CODE_SNR_HIGH                0x0000001d
339
340 #endif                          /* _HOST_H_ */