Merge branch 'wireless-2.6' into wireless-next-2.6
[safe/jmp/linux-2.6] / drivers / net / wireless / iwlwifi / iwl-agn.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
4  *
5  * Portions of this file are derived from the ipw3945 project, as well
6  * as portions of the ieee80211 subsystem header files.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2 of the GNU General Public License as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program; if not, write to the Free Software Foundation, Inc.,
19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20  *
21  * The full GNU General Public License is included in this distribution in the
22  * file called LICENSE.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *
28  *****************************************************************************/
29
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/delay.h>
36 #include <linux/sched.h>
37 #include <linux/skbuff.h>
38 #include <linux/netdevice.h>
39 #include <linux/wireless.h>
40 #include <linux/firmware.h>
41 #include <linux/etherdevice.h>
42 #include <linux/if_arp.h>
43
44 #include <net/mac80211.h>
45
46 #include <asm/div64.h>
47
48 #define DRV_NAME        "iwlagn"
49
50 #include "iwl-eeprom.h"
51 #include "iwl-dev.h"
52 #include "iwl-core.h"
53 #include "iwl-io.h"
54 #include "iwl-helpers.h"
55 #include "iwl-sta.h"
56 #include "iwl-calib.h"
57 #include "iwl-agn.h"
58
59
60 /******************************************************************************
61  *
62  * module boiler plate
63  *
64  ******************************************************************************/
65
66 /*
67  * module name, copyright, version, etc.
68  */
69 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
70
71 #ifdef CONFIG_IWLWIFI_DEBUG
72 #define VD "d"
73 #else
74 #define VD
75 #endif
76
77 #define DRV_VERSION     IWLWIFI_VERSION VD
78
79
80 MODULE_DESCRIPTION(DRV_DESCRIPTION);
81 MODULE_VERSION(DRV_VERSION);
82 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
83 MODULE_LICENSE("GPL");
84 MODULE_ALIAS("iwl4965");
85
86 /**
87  * iwl_commit_rxon - commit staging_rxon to hardware
88  *
89  * The RXON command in staging_rxon is committed to the hardware and
90  * the active_rxon structure is updated with the new data.  This
91  * function correctly transitions out of the RXON_ASSOC_MSK state if
92  * a HW tune is required based on the RXON structure changes.
93  */
94 int iwl_commit_rxon(struct iwl_priv *priv)
95 {
96         /* cast away the const for active_rxon in this function */
97         struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
98         int ret;
99         bool new_assoc =
100                 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
101
102         if (!iwl_is_alive(priv))
103                 return -EBUSY;
104
105         /* always get timestamp with Rx frame */
106         priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
107
108         ret = iwl_check_rxon_cmd(priv);
109         if (ret) {
110                 IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
111                 return -EINVAL;
112         }
113
114         /*
115          * receive commit_rxon request
116          * abort any previous channel switch if still in process
117          */
118         if (priv->switch_rxon.switch_in_progress &&
119             (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
120                 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
121                       le16_to_cpu(priv->switch_rxon.channel));
122                 priv->switch_rxon.switch_in_progress = false;
123         }
124
125         /* If we don't need to send a full RXON, we can use
126          * iwl_rxon_assoc_cmd which is used to reconfigure filter
127          * and other flags for the current radio configuration. */
128         if (!iwl_full_rxon_required(priv)) {
129                 ret = iwl_send_rxon_assoc(priv);
130                 if (ret) {
131                         IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
132                         return ret;
133                 }
134
135                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
136                 iwl_print_rx_config_cmd(priv);
137                 return 0;
138         }
139
140         /* If we are currently associated and the new config requires
141          * an RXON_ASSOC and the new config wants the associated mask enabled,
142          * we must clear the associated from the active configuration
143          * before we apply the new config */
144         if (iwl_is_associated(priv) && new_assoc) {
145                 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
146                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
147
148                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
149                                       sizeof(struct iwl_rxon_cmd),
150                                       &priv->active_rxon);
151
152                 /* If the mask clearing failed then we set
153                  * active_rxon back to what it was previously */
154                 if (ret) {
155                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
156                         IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
157                         return ret;
158                 }
159                 iwl_clear_ucode_stations(priv, false);
160                 iwl_restore_stations(priv);
161                 ret = iwl_restore_default_wep_keys(priv);
162                 if (ret) {
163                         IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
164                         return ret;
165                 }
166         }
167
168         IWL_DEBUG_INFO(priv, "Sending RXON\n"
169                        "* with%s RXON_FILTER_ASSOC_MSK\n"
170                        "* channel = %d\n"
171                        "* bssid = %pM\n",
172                        (new_assoc ? "" : "out"),
173                        le16_to_cpu(priv->staging_rxon.channel),
174                        priv->staging_rxon.bssid_addr);
175
176         iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
177
178         /* Apply the new configuration
179          * RXON unassoc clears the station table in uCode so restoration of
180          * stations is needed after it (the RXON command) completes
181          */
182         if (!new_assoc) {
183                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
184                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
185                 if (ret) {
186                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
187                         return ret;
188                 }
189                 IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
190                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
191                 iwl_clear_ucode_stations(priv, false);
192                 iwl_restore_stations(priv);
193                 ret = iwl_restore_default_wep_keys(priv);
194                 if (ret) {
195                         IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
196                         return ret;
197                 }
198         }
199
200         priv->start_calib = 0;
201         if (new_assoc) {
202                 /*
203                  * allow CTS-to-self if possible for new association.
204                  * this is relevant only for 5000 series and up,
205                  * but will not damage 4965
206                  */
207                 priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
208
209                 /* Apply the new configuration
210                  * RXON assoc doesn't clear the station table in uCode,
211                  */
212                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
213                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
214                 if (ret) {
215                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
216                         return ret;
217                 }
218                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
219         }
220         iwl_print_rx_config_cmd(priv);
221
222         iwl_init_sensitivity(priv);
223
224         /* If we issue a new RXON command which required a tune then we must
225          * send a new TXPOWER command or we won't be able to Tx any frames */
226         ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
227         if (ret) {
228                 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
229                 return ret;
230         }
231
232         return 0;
233 }
234
235 void iwl_update_chain_flags(struct iwl_priv *priv)
236 {
237
238         if (priv->cfg->ops->hcmd->set_rxon_chain)
239                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
240         iwlcore_commit_rxon(priv);
241 }
242
243 static void iwl_clear_free_frames(struct iwl_priv *priv)
244 {
245         struct list_head *element;
246
247         IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
248                        priv->frames_count);
249
250         while (!list_empty(&priv->free_frames)) {
251                 element = priv->free_frames.next;
252                 list_del(element);
253                 kfree(list_entry(element, struct iwl_frame, list));
254                 priv->frames_count--;
255         }
256
257         if (priv->frames_count) {
258                 IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
259                             priv->frames_count);
260                 priv->frames_count = 0;
261         }
262 }
263
264 static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
265 {
266         struct iwl_frame *frame;
267         struct list_head *element;
268         if (list_empty(&priv->free_frames)) {
269                 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
270                 if (!frame) {
271                         IWL_ERR(priv, "Could not allocate frame!\n");
272                         return NULL;
273                 }
274
275                 priv->frames_count++;
276                 return frame;
277         }
278
279         element = priv->free_frames.next;
280         list_del(element);
281         return list_entry(element, struct iwl_frame, list);
282 }
283
284 static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
285 {
286         memset(frame, 0, sizeof(*frame));
287         list_add(&frame->list, &priv->free_frames);
288 }
289
290 static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
291                                           struct ieee80211_hdr *hdr,
292                                           int left)
293 {
294         if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
295             ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
296              (priv->iw_mode != NL80211_IFTYPE_AP)))
297                 return 0;
298
299         if (priv->ibss_beacon->len > left)
300                 return 0;
301
302         memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
303
304         return priv->ibss_beacon->len;
305 }
306
307 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
308 static void iwl_set_beacon_tim(struct iwl_priv *priv,
309                 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
310                 u8 *beacon, u32 frame_size)
311 {
312         u16 tim_idx;
313         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
314
315         /*
316          * The index is relative to frame start but we start looking at the
317          * variable-length part of the beacon.
318          */
319         tim_idx = mgmt->u.beacon.variable - beacon;
320
321         /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
322         while ((tim_idx < (frame_size - 2)) &&
323                         (beacon[tim_idx] != WLAN_EID_TIM))
324                 tim_idx += beacon[tim_idx+1] + 2;
325
326         /* If TIM field was found, set variables */
327         if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
328                 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
329                 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
330         } else
331                 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
332 }
333
334 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
335                                        struct iwl_frame *frame)
336 {
337         struct iwl_tx_beacon_cmd *tx_beacon_cmd;
338         u32 frame_size;
339         u32 rate_flags;
340         u32 rate;
341         /*
342          * We have to set up the TX command, the TX Beacon command, and the
343          * beacon contents.
344          */
345
346         /* Initialize memory */
347         tx_beacon_cmd = &frame->u.beacon;
348         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
349
350         /* Set up TX beacon contents */
351         frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
352                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
353         if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
354                 return 0;
355
356         /* Set up TX command fields */
357         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
358         tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
359         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
360         tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
361                 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
362
363         /* Set up TX beacon command fields */
364         iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
365                         frame_size);
366
367         /* Set up packet rate and flags */
368         rate = iwl_rate_get_lowest_plcp(priv);
369         priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
370         rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
371         if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
372                 rate_flags |= RATE_MCS_CCK_MSK;
373         tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
374                         rate_flags);
375
376         return sizeof(*tx_beacon_cmd) + frame_size;
377 }
378 static int iwl_send_beacon_cmd(struct iwl_priv *priv)
379 {
380         struct iwl_frame *frame;
381         unsigned int frame_size;
382         int rc;
383
384         frame = iwl_get_free_frame(priv);
385         if (!frame) {
386                 IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
387                           "command.\n");
388                 return -ENOMEM;
389         }
390
391         frame_size = iwl_hw_get_beacon_cmd(priv, frame);
392         if (!frame_size) {
393                 IWL_ERR(priv, "Error configuring the beacon command\n");
394                 iwl_free_frame(priv, frame);
395                 return -EINVAL;
396         }
397
398         rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
399                               &frame->u.cmd[0]);
400
401         iwl_free_frame(priv, frame);
402
403         return rc;
404 }
405
406 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
407 {
408         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
409
410         dma_addr_t addr = get_unaligned_le32(&tb->lo);
411         if (sizeof(dma_addr_t) > sizeof(u32))
412                 addr |=
413                 ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
414
415         return addr;
416 }
417
418 static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
419 {
420         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
421
422         return le16_to_cpu(tb->hi_n_len) >> 4;
423 }
424
425 static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
426                                   dma_addr_t addr, u16 len)
427 {
428         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
429         u16 hi_n_len = len << 4;
430
431         put_unaligned_le32(addr, &tb->lo);
432         if (sizeof(dma_addr_t) > sizeof(u32))
433                 hi_n_len |= ((addr >> 16) >> 16) & 0xF;
434
435         tb->hi_n_len = cpu_to_le16(hi_n_len);
436
437         tfd->num_tbs = idx + 1;
438 }
439
440 static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
441 {
442         return tfd->num_tbs & 0x1f;
443 }
444
445 /**
446  * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
447  * @priv - driver private data
448  * @txq - tx queue
449  *
450  * Does NOT advance any TFD circular buffer read/write indexes
451  * Does NOT free the TFD itself (which is within circular buffer)
452  */
453 void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
454 {
455         struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
456         struct iwl_tfd *tfd;
457         struct pci_dev *dev = priv->pci_dev;
458         int index = txq->q.read_ptr;
459         int i;
460         int num_tbs;
461
462         tfd = &tfd_tmp[index];
463
464         /* Sanity check on number of chunks */
465         num_tbs = iwl_tfd_get_num_tbs(tfd);
466
467         if (num_tbs >= IWL_NUM_OF_TBS) {
468                 IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
469                 /* @todo issue fatal error, it is quite serious situation */
470                 return;
471         }
472
473         /* Unmap tx_cmd */
474         if (num_tbs)
475                 pci_unmap_single(dev,
476                                 pci_unmap_addr(&txq->meta[index], mapping),
477                                 pci_unmap_len(&txq->meta[index], len),
478                                 PCI_DMA_BIDIRECTIONAL);
479
480         /* Unmap chunks, if any. */
481         for (i = 1; i < num_tbs; i++) {
482                 pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
483                                 iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
484
485                 if (txq->txb) {
486                         dev_kfree_skb(txq->txb[txq->q.read_ptr].skb[i - 1]);
487                         txq->txb[txq->q.read_ptr].skb[i - 1] = NULL;
488                 }
489         }
490 }
491
492 int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
493                                  struct iwl_tx_queue *txq,
494                                  dma_addr_t addr, u16 len,
495                                  u8 reset, u8 pad)
496 {
497         struct iwl_queue *q;
498         struct iwl_tfd *tfd, *tfd_tmp;
499         u32 num_tbs;
500
501         q = &txq->q;
502         tfd_tmp = (struct iwl_tfd *)txq->tfds;
503         tfd = &tfd_tmp[q->write_ptr];
504
505         if (reset)
506                 memset(tfd, 0, sizeof(*tfd));
507
508         num_tbs = iwl_tfd_get_num_tbs(tfd);
509
510         /* Each TFD can point to a maximum 20 Tx buffers */
511         if (num_tbs >= IWL_NUM_OF_TBS) {
512                 IWL_ERR(priv, "Error can not send more than %d chunks\n",
513                           IWL_NUM_OF_TBS);
514                 return -EINVAL;
515         }
516
517         BUG_ON(addr & ~DMA_BIT_MASK(36));
518         if (unlikely(addr & ~IWL_TX_DMA_MASK))
519                 IWL_ERR(priv, "Unaligned address = %llx\n",
520                           (unsigned long long)addr);
521
522         iwl_tfd_set_tb(tfd, num_tbs, addr, len);
523
524         return 0;
525 }
526
527 /*
528  * Tell nic where to find circular buffer of Tx Frame Descriptors for
529  * given Tx queue, and enable the DMA channel used for that queue.
530  *
531  * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
532  * channels supported in hardware.
533  */
534 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
535                          struct iwl_tx_queue *txq)
536 {
537         int txq_id = txq->q.id;
538
539         /* Circular buffer (TFD queue in DRAM) physical base address */
540         iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
541                              txq->q.dma_addr >> 8);
542
543         return 0;
544 }
545
546 /******************************************************************************
547  *
548  * Generic RX handler implementations
549  *
550  ******************************************************************************/
551 static void iwl_rx_reply_alive(struct iwl_priv *priv,
552                                 struct iwl_rx_mem_buffer *rxb)
553 {
554         struct iwl_rx_packet *pkt = rxb_addr(rxb);
555         struct iwl_alive_resp *palive;
556         struct delayed_work *pwork;
557
558         palive = &pkt->u.alive_frame;
559
560         IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
561                        "0x%01X 0x%01X\n",
562                        palive->is_valid, palive->ver_type,
563                        palive->ver_subtype);
564
565         if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
566                 IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
567                 memcpy(&priv->card_alive_init,
568                        &pkt->u.alive_frame,
569                        sizeof(struct iwl_init_alive_resp));
570                 pwork = &priv->init_alive_start;
571         } else {
572                 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
573                 memcpy(&priv->card_alive, &pkt->u.alive_frame,
574                        sizeof(struct iwl_alive_resp));
575                 pwork = &priv->alive_start;
576         }
577
578         /* We delay the ALIVE response by 5ms to
579          * give the HW RF Kill time to activate... */
580         if (palive->is_valid == UCODE_VALID_OK)
581                 queue_delayed_work(priv->workqueue, pwork,
582                                    msecs_to_jiffies(5));
583         else
584                 IWL_WARN(priv, "uCode did not respond OK.\n");
585 }
586
587 static void iwl_bg_beacon_update(struct work_struct *work)
588 {
589         struct iwl_priv *priv =
590                 container_of(work, struct iwl_priv, beacon_update);
591         struct sk_buff *beacon;
592
593         /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
594         beacon = ieee80211_beacon_get(priv->hw, priv->vif);
595
596         if (!beacon) {
597                 IWL_ERR(priv, "update beacon failed\n");
598                 return;
599         }
600
601         mutex_lock(&priv->mutex);
602         /* new beacon skb is allocated every time; dispose previous.*/
603         if (priv->ibss_beacon)
604                 dev_kfree_skb(priv->ibss_beacon);
605
606         priv->ibss_beacon = beacon;
607         mutex_unlock(&priv->mutex);
608
609         iwl_send_beacon_cmd(priv);
610 }
611
612 /**
613  * iwl_bg_statistics_periodic - Timer callback to queue statistics
614  *
615  * This callback is provided in order to send a statistics request.
616  *
617  * This timer function is continually reset to execute within
618  * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
619  * was received.  We need to ensure we receive the statistics in order
620  * to update the temperature used for calibrating the TXPOWER.
621  */
622 static void iwl_bg_statistics_periodic(unsigned long data)
623 {
624         struct iwl_priv *priv = (struct iwl_priv *)data;
625
626         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
627                 return;
628
629         /* dont send host command if rf-kill is on */
630         if (!iwl_is_ready_rf(priv))
631                 return;
632
633         iwl_send_statistics_request(priv, CMD_ASYNC, false);
634 }
635
636
637 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
638                                         u32 start_idx, u32 num_events,
639                                         u32 mode)
640 {
641         u32 i;
642         u32 ptr;        /* SRAM byte address of log data */
643         u32 ev, time, data; /* event log data */
644         unsigned long reg_flags;
645
646         if (mode == 0)
647                 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
648         else
649                 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
650
651         /* Make sure device is powered up for SRAM reads */
652         spin_lock_irqsave(&priv->reg_lock, reg_flags);
653         if (iwl_grab_nic_access(priv)) {
654                 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
655                 return;
656         }
657
658         /* Set starting address; reads will auto-increment */
659         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
660         rmb();
661
662         /*
663          * "time" is actually "data" for mode 0 (no timestamp).
664          * place event id # at far right for easier visual parsing.
665          */
666         for (i = 0; i < num_events; i++) {
667                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
668                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
669                 if (mode == 0) {
670                         trace_iwlwifi_dev_ucode_cont_event(priv,
671                                                         0, time, ev);
672                 } else {
673                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
674                         trace_iwlwifi_dev_ucode_cont_event(priv,
675                                                 time, data, ev);
676                 }
677         }
678         /* Allow device to power down */
679         iwl_release_nic_access(priv);
680         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
681 }
682
683 static void iwl_continuous_event_trace(struct iwl_priv *priv)
684 {
685         u32 capacity;   /* event log capacity in # entries */
686         u32 base;       /* SRAM byte address of event log header */
687         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
688         u32 num_wraps;  /* # times uCode wrapped to top of log */
689         u32 next_entry; /* index of next entry to be written by uCode */
690
691         if (priv->ucode_type == UCODE_INIT)
692                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
693         else
694                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
695         if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
696                 capacity = iwl_read_targ_mem(priv, base);
697                 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
698                 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
699                 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
700         } else
701                 return;
702
703         if (num_wraps == priv->event_log.num_wraps) {
704                 iwl_print_cont_event_trace(priv,
705                                        base, priv->event_log.next_entry,
706                                        next_entry - priv->event_log.next_entry,
707                                        mode);
708                 priv->event_log.non_wraps_count++;
709         } else {
710                 if ((num_wraps - priv->event_log.num_wraps) > 1)
711                         priv->event_log.wraps_more_count++;
712                 else
713                         priv->event_log.wraps_once_count++;
714                 trace_iwlwifi_dev_ucode_wrap_event(priv,
715                                 num_wraps - priv->event_log.num_wraps,
716                                 next_entry, priv->event_log.next_entry);
717                 if (next_entry < priv->event_log.next_entry) {
718                         iwl_print_cont_event_trace(priv, base,
719                                priv->event_log.next_entry,
720                                capacity - priv->event_log.next_entry,
721                                mode);
722
723                         iwl_print_cont_event_trace(priv, base, 0,
724                                 next_entry, mode);
725                 } else {
726                         iwl_print_cont_event_trace(priv, base,
727                                next_entry, capacity - next_entry,
728                                mode);
729
730                         iwl_print_cont_event_trace(priv, base, 0,
731                                 next_entry, mode);
732                 }
733         }
734         priv->event_log.num_wraps = num_wraps;
735         priv->event_log.next_entry = next_entry;
736 }
737
738 /**
739  * iwl_bg_ucode_trace - Timer callback to log ucode event
740  *
741  * The timer is continually set to execute every
742  * UCODE_TRACE_PERIOD milliseconds after the last timer expired
743  * this function is to perform continuous uCode event logging operation
744  * if enabled
745  */
746 static void iwl_bg_ucode_trace(unsigned long data)
747 {
748         struct iwl_priv *priv = (struct iwl_priv *)data;
749
750         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
751                 return;
752
753         if (priv->event_log.ucode_trace) {
754                 iwl_continuous_event_trace(priv);
755                 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
756                 mod_timer(&priv->ucode_trace,
757                          jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
758         }
759 }
760
761 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
762                                 struct iwl_rx_mem_buffer *rxb)
763 {
764 #ifdef CONFIG_IWLWIFI_DEBUG
765         struct iwl_rx_packet *pkt = rxb_addr(rxb);
766         struct iwl4965_beacon_notif *beacon =
767                 (struct iwl4965_beacon_notif *)pkt->u.raw;
768         u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
769
770         IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
771                 "tsf %d %d rate %d\n",
772                 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
773                 beacon->beacon_notify_hdr.failure_frame,
774                 le32_to_cpu(beacon->ibss_mgr_status),
775                 le32_to_cpu(beacon->high_tsf),
776                 le32_to_cpu(beacon->low_tsf), rate);
777 #endif
778
779         if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
780             (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
781                 queue_work(priv->workqueue, &priv->beacon_update);
782 }
783
784 /* Handle notification from uCode that card's power state is changing
785  * due to software, hardware, or critical temperature RFKILL */
786 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
787                                     struct iwl_rx_mem_buffer *rxb)
788 {
789         struct iwl_rx_packet *pkt = rxb_addr(rxb);
790         u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
791         unsigned long status = priv->status;
792
793         IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
794                           (flags & HW_CARD_DISABLED) ? "Kill" : "On",
795                           (flags & SW_CARD_DISABLED) ? "Kill" : "On",
796                           (flags & CT_CARD_DISABLED) ?
797                           "Reached" : "Not reached");
798
799         if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
800                      CT_CARD_DISABLED)) {
801
802                 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
803                             CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
804
805                 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
806                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
807
808                 if (!(flags & RXON_CARD_DISABLED)) {
809                         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
810                                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
811                         iwl_write_direct32(priv, HBUS_TARG_MBX_C,
812                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
813                 }
814                 if (flags & CT_CARD_DISABLED)
815                         iwl_tt_enter_ct_kill(priv);
816         }
817         if (!(flags & CT_CARD_DISABLED))
818                 iwl_tt_exit_ct_kill(priv);
819
820         if (flags & HW_CARD_DISABLED)
821                 set_bit(STATUS_RF_KILL_HW, &priv->status);
822         else
823                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
824
825
826         if (!(flags & RXON_CARD_DISABLED))
827                 iwl_scan_cancel(priv);
828
829         if ((test_bit(STATUS_RF_KILL_HW, &status) !=
830              test_bit(STATUS_RF_KILL_HW, &priv->status)))
831                 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
832                         test_bit(STATUS_RF_KILL_HW, &priv->status));
833         else
834                 wake_up_interruptible(&priv->wait_command_queue);
835 }
836
837 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
838 {
839         if (src == IWL_PWR_SRC_VAUX) {
840                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
841                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
842                                                APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
843                                                ~APMG_PS_CTRL_MSK_PWR_SRC);
844         } else {
845                 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
846                                        APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
847                                        ~APMG_PS_CTRL_MSK_PWR_SRC);
848         }
849
850         return 0;
851 }
852
853 /**
854  * iwl_setup_rx_handlers - Initialize Rx handler callbacks
855  *
856  * Setup the RX handlers for each of the reply types sent from the uCode
857  * to the host.
858  *
859  * This function chains into the hardware specific files for them to setup
860  * any hardware specific handlers as well.
861  */
862 static void iwl_setup_rx_handlers(struct iwl_priv *priv)
863 {
864         priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
865         priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
866         priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
867         priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
868                         iwl_rx_spectrum_measure_notif;
869         priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
870         priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
871             iwl_rx_pm_debug_statistics_notif;
872         priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
873
874         /*
875          * The same handler is used for both the REPLY to a discrete
876          * statistics request from the host as well as for the periodic
877          * statistics notifications (after received beacons) from the uCode.
878          */
879         priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
880         priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
881
882         iwl_setup_rx_scan_handlers(priv);
883
884         /* status change handler */
885         priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
886
887         priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
888             iwl_rx_missed_beacon_notif;
889         /* Rx handlers */
890         priv->rx_handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy;
891         priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx;
892         /* block ack */
893         priv->rx_handlers[REPLY_COMPRESSED_BA] = iwlagn_rx_reply_compressed_ba;
894         /* Set up hardware specific Rx handlers */
895         priv->cfg->ops->lib->rx_handler_setup(priv);
896 }
897
898 /**
899  * iwl_rx_handle - Main entry function for receiving responses from uCode
900  *
901  * Uses the priv->rx_handlers callback function array to invoke
902  * the appropriate handlers, including command responses,
903  * frame-received notifications, and other notifications.
904  */
905 void iwl_rx_handle(struct iwl_priv *priv)
906 {
907         struct iwl_rx_mem_buffer *rxb;
908         struct iwl_rx_packet *pkt;
909         struct iwl_rx_queue *rxq = &priv->rxq;
910         u32 r, i;
911         int reclaim;
912         unsigned long flags;
913         u8 fill_rx = 0;
914         u32 count = 8;
915         int total_empty;
916
917         /* uCode's read index (stored in shared DRAM) indicates the last Rx
918          * buffer that the driver may process (last buffer filled by ucode). */
919         r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
920         i = rxq->read;
921
922         /* Rx interrupt, but nothing sent from uCode */
923         if (i == r)
924                 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
925
926         /* calculate total frames need to be restock after handling RX */
927         total_empty = r - rxq->write_actual;
928         if (total_empty < 0)
929                 total_empty += RX_QUEUE_SIZE;
930
931         if (total_empty > (RX_QUEUE_SIZE / 2))
932                 fill_rx = 1;
933
934         while (i != r) {
935                 rxb = rxq->queue[i];
936
937                 /* If an RXB doesn't have a Rx queue slot associated with it,
938                  * then a bug has been introduced in the queue refilling
939                  * routines -- catch it here */
940                 BUG_ON(rxb == NULL);
941
942                 rxq->queue[i] = NULL;
943
944                 pci_unmap_page(priv->pci_dev, rxb->page_dma,
945                                PAGE_SIZE << priv->hw_params.rx_page_order,
946                                PCI_DMA_FROMDEVICE);
947                 pkt = rxb_addr(rxb);
948
949                 trace_iwlwifi_dev_rx(priv, pkt,
950                         le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
951
952                 /* Reclaim a command buffer only if this packet is a response
953                  *   to a (driver-originated) command.
954                  * If the packet (e.g. Rx frame) originated from uCode,
955                  *   there is no command buffer to reclaim.
956                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
957                  *   but apparently a few don't get set; catch them here. */
958                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
959                         (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
960                         (pkt->hdr.cmd != REPLY_RX) &&
961                         (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
962                         (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
963                         (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
964                         (pkt->hdr.cmd != REPLY_TX);
965
966                 /* Based on type of command response or notification,
967                  *   handle those that need handling via function in
968                  *   rx_handlers table.  See iwl_setup_rx_handlers() */
969                 if (priv->rx_handlers[pkt->hdr.cmd]) {
970                         IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
971                                 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
972                         priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
973                         priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
974                 } else {
975                         /* No handling needed */
976                         IWL_DEBUG_RX(priv,
977                                 "r %d i %d No handler needed for %s, 0x%02x\n",
978                                 r, i, get_cmd_string(pkt->hdr.cmd),
979                                 pkt->hdr.cmd);
980                 }
981
982                 /*
983                  * XXX: After here, we should always check rxb->page
984                  * against NULL before touching it or its virtual
985                  * memory (pkt). Because some rx_handler might have
986                  * already taken or freed the pages.
987                  */
988
989                 if (reclaim) {
990                         /* Invoke any callbacks, transfer the buffer to caller,
991                          * and fire off the (possibly) blocking iwl_send_cmd()
992                          * as we reclaim the driver command queue */
993                         if (rxb->page)
994                                 iwl_tx_cmd_complete(priv, rxb);
995                         else
996                                 IWL_WARN(priv, "Claim null rxb?\n");
997                 }
998
999                 /* Reuse the page if possible. For notification packets and
1000                  * SKBs that fail to Rx correctly, add them back into the
1001                  * rx_free list for reuse later. */
1002                 spin_lock_irqsave(&rxq->lock, flags);
1003                 if (rxb->page != NULL) {
1004                         rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
1005                                 0, PAGE_SIZE << priv->hw_params.rx_page_order,
1006                                 PCI_DMA_FROMDEVICE);
1007                         list_add_tail(&rxb->list, &rxq->rx_free);
1008                         rxq->free_count++;
1009                 } else
1010                         list_add_tail(&rxb->list, &rxq->rx_used);
1011
1012                 spin_unlock_irqrestore(&rxq->lock, flags);
1013
1014                 i = (i + 1) & RX_QUEUE_MASK;
1015                 /* If there are a lot of unused frames,
1016                  * restock the Rx queue so ucode wont assert. */
1017                 if (fill_rx) {
1018                         count++;
1019                         if (count >= 8) {
1020                                 rxq->read = i;
1021                                 iwlagn_rx_replenish_now(priv);
1022                                 count = 0;
1023                         }
1024                 }
1025         }
1026
1027         /* Backtrack one entry */
1028         rxq->read = i;
1029         if (fill_rx)
1030                 iwlagn_rx_replenish_now(priv);
1031         else
1032                 iwlagn_rx_queue_restock(priv);
1033 }
1034
1035 /* call this function to flush any scheduled tasklet */
1036 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
1037 {
1038         /* wait to make sure we flush pending tasklet*/
1039         synchronize_irq(priv->pci_dev->irq);
1040         tasklet_kill(&priv->irq_tasklet);
1041 }
1042
1043 static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
1044 {
1045         u32 inta, handled = 0;
1046         u32 inta_fh;
1047         unsigned long flags;
1048         u32 i;
1049 #ifdef CONFIG_IWLWIFI_DEBUG
1050         u32 inta_mask;
1051 #endif
1052
1053         spin_lock_irqsave(&priv->lock, flags);
1054
1055         /* Ack/clear/reset pending uCode interrupts.
1056          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1057          *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1058         inta = iwl_read32(priv, CSR_INT);
1059         iwl_write32(priv, CSR_INT, inta);
1060
1061         /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1062          * Any new interrupts that happen after this, either while we're
1063          * in this tasklet, or later, will show up in next ISR/tasklet. */
1064         inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1065         iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
1066
1067 #ifdef CONFIG_IWLWIFI_DEBUG
1068         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1069                 /* just for debug */
1070                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1071                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1072                               inta, inta_mask, inta_fh);
1073         }
1074 #endif
1075
1076         spin_unlock_irqrestore(&priv->lock, flags);
1077
1078         /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1079          * atomic, make sure that inta covers all the interrupts that
1080          * we've discovered, even if FH interrupt came in just after
1081          * reading CSR_INT. */
1082         if (inta_fh & CSR49_FH_INT_RX_MASK)
1083                 inta |= CSR_INT_BIT_FH_RX;
1084         if (inta_fh & CSR49_FH_INT_TX_MASK)
1085                 inta |= CSR_INT_BIT_FH_TX;
1086
1087         /* Now service all interrupt bits discovered above. */
1088         if (inta & CSR_INT_BIT_HW_ERR) {
1089                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1090
1091                 /* Tell the device to stop sending interrupts */
1092                 iwl_disable_interrupts(priv);
1093
1094                 priv->isr_stats.hw++;
1095                 iwl_irq_handle_error(priv);
1096
1097                 handled |= CSR_INT_BIT_HW_ERR;
1098
1099                 return;
1100         }
1101
1102 #ifdef CONFIG_IWLWIFI_DEBUG
1103         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1104                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1105                 if (inta & CSR_INT_BIT_SCD) {
1106                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1107                                       "the frame/frames.\n");
1108                         priv->isr_stats.sch++;
1109                 }
1110
1111                 /* Alive notification via Rx interrupt will do the real work */
1112                 if (inta & CSR_INT_BIT_ALIVE) {
1113                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1114                         priv->isr_stats.alive++;
1115                 }
1116         }
1117 #endif
1118         /* Safely ignore these bits for debug checks below */
1119         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1120
1121         /* HW RF KILL switch toggled */
1122         if (inta & CSR_INT_BIT_RF_KILL) {
1123                 int hw_rf_kill = 0;
1124                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1125                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1126                         hw_rf_kill = 1;
1127
1128                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1129                                 hw_rf_kill ? "disable radio" : "enable radio");
1130
1131                 priv->isr_stats.rfkill++;
1132
1133                 /* driver only loads ucode once setting the interface up.
1134                  * the driver allows loading the ucode even if the radio
1135                  * is killed. Hence update the killswitch state here. The
1136                  * rfkill handler will care about restarting if needed.
1137                  */
1138                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1139                         if (hw_rf_kill)
1140                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1141                         else
1142                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1143                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1144                 }
1145
1146                 handled |= CSR_INT_BIT_RF_KILL;
1147         }
1148
1149         /* Chip got too hot and stopped itself */
1150         if (inta & CSR_INT_BIT_CT_KILL) {
1151                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1152                 priv->isr_stats.ctkill++;
1153                 handled |= CSR_INT_BIT_CT_KILL;
1154         }
1155
1156         /* Error detected by uCode */
1157         if (inta & CSR_INT_BIT_SW_ERR) {
1158                 IWL_ERR(priv, "Microcode SW error detected. "
1159                         " Restarting 0x%X.\n", inta);
1160                 priv->isr_stats.sw++;
1161                 priv->isr_stats.sw_err = inta;
1162                 iwl_irq_handle_error(priv);
1163                 handled |= CSR_INT_BIT_SW_ERR;
1164         }
1165
1166         /*
1167          * uCode wakes up after power-down sleep.
1168          * Tell device about any new tx or host commands enqueued,
1169          * and about any Rx buffers made available while asleep.
1170          */
1171         if (inta & CSR_INT_BIT_WAKEUP) {
1172                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1173                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1174                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1175                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1176                 priv->isr_stats.wakeup++;
1177                 handled |= CSR_INT_BIT_WAKEUP;
1178         }
1179
1180         /* All uCode command responses, including Tx command responses,
1181          * Rx "responses" (frame-received notification), and other
1182          * notifications from uCode come through here*/
1183         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1184                 iwl_rx_handle(priv);
1185                 priv->isr_stats.rx++;
1186                 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1187         }
1188
1189         /* This "Tx" DMA channel is used only for loading uCode */
1190         if (inta & CSR_INT_BIT_FH_TX) {
1191                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1192                 priv->isr_stats.tx++;
1193                 handled |= CSR_INT_BIT_FH_TX;
1194                 /* Wake up uCode load routine, now that load is complete */
1195                 priv->ucode_write_complete = 1;
1196                 wake_up_interruptible(&priv->wait_command_queue);
1197         }
1198
1199         if (inta & ~handled) {
1200                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1201                 priv->isr_stats.unhandled++;
1202         }
1203
1204         if (inta & ~(priv->inta_mask)) {
1205                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1206                          inta & ~priv->inta_mask);
1207                 IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
1208         }
1209
1210         /* Re-enable all interrupts */
1211         /* only Re-enable if diabled by irq */
1212         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1213                 iwl_enable_interrupts(priv);
1214
1215 #ifdef CONFIG_IWLWIFI_DEBUG
1216         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1217                 inta = iwl_read32(priv, CSR_INT);
1218                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1219                 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1220                 IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1221                         "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1222         }
1223 #endif
1224 }
1225
1226 /* tasklet for iwlagn interrupt */
1227 static void iwl_irq_tasklet(struct iwl_priv *priv)
1228 {
1229         u32 inta = 0;
1230         u32 handled = 0;
1231         unsigned long flags;
1232         u32 i;
1233 #ifdef CONFIG_IWLWIFI_DEBUG
1234         u32 inta_mask;
1235 #endif
1236
1237         spin_lock_irqsave(&priv->lock, flags);
1238
1239         /* Ack/clear/reset pending uCode interrupts.
1240          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1241          */
1242         /* There is a hardware bug in the interrupt mask function that some
1243          * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
1244          * they are disabled in the CSR_INT_MASK register. Furthermore the
1245          * ICT interrupt handling mechanism has another bug that might cause
1246          * these unmasked interrupts fail to be detected. We workaround the
1247          * hardware bugs here by ACKing all the possible interrupts so that
1248          * interrupt coalescing can still be achieved.
1249          */
1250         iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
1251
1252         inta = priv->_agn.inta;
1253
1254 #ifdef CONFIG_IWLWIFI_DEBUG
1255         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1256                 /* just for debug */
1257                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1258                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
1259                                 inta, inta_mask);
1260         }
1261 #endif
1262
1263         spin_unlock_irqrestore(&priv->lock, flags);
1264
1265         /* saved interrupt in inta variable now we can reset priv->_agn.inta */
1266         priv->_agn.inta = 0;
1267
1268         /* Now service all interrupt bits discovered above. */
1269         if (inta & CSR_INT_BIT_HW_ERR) {
1270                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1271
1272                 /* Tell the device to stop sending interrupts */
1273                 iwl_disable_interrupts(priv);
1274
1275                 priv->isr_stats.hw++;
1276                 iwl_irq_handle_error(priv);
1277
1278                 handled |= CSR_INT_BIT_HW_ERR;
1279
1280                 return;
1281         }
1282
1283 #ifdef CONFIG_IWLWIFI_DEBUG
1284         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1285                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1286                 if (inta & CSR_INT_BIT_SCD) {
1287                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1288                                       "the frame/frames.\n");
1289                         priv->isr_stats.sch++;
1290                 }
1291
1292                 /* Alive notification via Rx interrupt will do the real work */
1293                 if (inta & CSR_INT_BIT_ALIVE) {
1294                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1295                         priv->isr_stats.alive++;
1296                 }
1297         }
1298 #endif
1299         /* Safely ignore these bits for debug checks below */
1300         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1301
1302         /* HW RF KILL switch toggled */
1303         if (inta & CSR_INT_BIT_RF_KILL) {
1304                 int hw_rf_kill = 0;
1305                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1306                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1307                         hw_rf_kill = 1;
1308
1309                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1310                                 hw_rf_kill ? "disable radio" : "enable radio");
1311
1312                 priv->isr_stats.rfkill++;
1313
1314                 /* driver only loads ucode once setting the interface up.
1315                  * the driver allows loading the ucode even if the radio
1316                  * is killed. Hence update the killswitch state here. The
1317                  * rfkill handler will care about restarting if needed.
1318                  */
1319                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1320                         if (hw_rf_kill)
1321                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1322                         else
1323                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1324                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1325                 }
1326
1327                 handled |= CSR_INT_BIT_RF_KILL;
1328         }
1329
1330         /* Chip got too hot and stopped itself */
1331         if (inta & CSR_INT_BIT_CT_KILL) {
1332                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1333                 priv->isr_stats.ctkill++;
1334                 handled |= CSR_INT_BIT_CT_KILL;
1335         }
1336
1337         /* Error detected by uCode */
1338         if (inta & CSR_INT_BIT_SW_ERR) {
1339                 IWL_ERR(priv, "Microcode SW error detected. "
1340                         " Restarting 0x%X.\n", inta);
1341                 priv->isr_stats.sw++;
1342                 priv->isr_stats.sw_err = inta;
1343                 iwl_irq_handle_error(priv);
1344                 handled |= CSR_INT_BIT_SW_ERR;
1345         }
1346
1347         /* uCode wakes up after power-down sleep */
1348         if (inta & CSR_INT_BIT_WAKEUP) {
1349                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1350                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1351                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1352                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1353
1354                 priv->isr_stats.wakeup++;
1355
1356                 handled |= CSR_INT_BIT_WAKEUP;
1357         }
1358
1359         /* All uCode command responses, including Tx command responses,
1360          * Rx "responses" (frame-received notification), and other
1361          * notifications from uCode come through here*/
1362         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1363                         CSR_INT_BIT_RX_PERIODIC)) {
1364                 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
1365                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1366                         handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1367                         iwl_write32(priv, CSR_FH_INT_STATUS,
1368                                         CSR49_FH_INT_RX_MASK);
1369                 }
1370                 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1371                         handled |= CSR_INT_BIT_RX_PERIODIC;
1372                         iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1373                 }
1374                 /* Sending RX interrupt require many steps to be done in the
1375                  * the device:
1376                  * 1- write interrupt to current index in ICT table.
1377                  * 2- dma RX frame.
1378                  * 3- update RX shared data to indicate last write index.
1379                  * 4- send interrupt.
1380                  * This could lead to RX race, driver could receive RX interrupt
1381                  * but the shared data changes does not reflect this;
1382                  * periodic interrupt will detect any dangling Rx activity.
1383                  */
1384
1385                 /* Disable periodic interrupt; we use it as just a one-shot. */
1386                 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1387                             CSR_INT_PERIODIC_DIS);
1388                 iwl_rx_handle(priv);
1389
1390                 /*
1391                  * Enable periodic interrupt in 8 msec only if we received
1392                  * real RX interrupt (instead of just periodic int), to catch
1393                  * any dangling Rx interrupt.  If it was just the periodic
1394                  * interrupt, there was no dangling Rx activity, and no need
1395                  * to extend the periodic interrupt; one-shot is enough.
1396                  */
1397                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1398                         iwl_write8(priv, CSR_INT_PERIODIC_REG,
1399                                     CSR_INT_PERIODIC_ENA);
1400
1401                 priv->isr_stats.rx++;
1402         }
1403
1404         /* This "Tx" DMA channel is used only for loading uCode */
1405         if (inta & CSR_INT_BIT_FH_TX) {
1406                 iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
1407                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1408                 priv->isr_stats.tx++;
1409                 handled |= CSR_INT_BIT_FH_TX;
1410                 /* Wake up uCode load routine, now that load is complete */
1411                 priv->ucode_write_complete = 1;
1412                 wake_up_interruptible(&priv->wait_command_queue);
1413         }
1414
1415         if (inta & ~handled) {
1416                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1417                 priv->isr_stats.unhandled++;
1418         }
1419
1420         if (inta & ~(priv->inta_mask)) {
1421                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1422                          inta & ~priv->inta_mask);
1423         }
1424
1425         /* Re-enable all interrupts */
1426         /* only Re-enable if diabled by irq */
1427         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1428                 iwl_enable_interrupts(priv);
1429 }
1430
1431 /* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
1432 #define ACK_CNT_RATIO (50)
1433 #define BA_TIMEOUT_CNT (5)
1434 #define BA_TIMEOUT_MAX (16)
1435
1436 /**
1437  * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
1438  *
1439  * When the ACK count ratio is 0 and aggregated BA timeout retries exceeding
1440  * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
1441  * operation state.
1442  */
1443 bool iwl_good_ack_health(struct iwl_priv *priv,
1444                                 struct iwl_rx_packet *pkt)
1445 {
1446         bool rc = true;
1447         int actual_ack_cnt_delta, expected_ack_cnt_delta;
1448         int ba_timeout_delta;
1449
1450         actual_ack_cnt_delta =
1451                 le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
1452                 le32_to_cpu(priv->statistics.tx.actual_ack_cnt);
1453         expected_ack_cnt_delta =
1454                 le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) -
1455                 le32_to_cpu(priv->statistics.tx.expected_ack_cnt);
1456         ba_timeout_delta =
1457                 le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) -
1458                 le32_to_cpu(priv->statistics.tx.agg.ba_timeout);
1459         if ((priv->_agn.agg_tids_count > 0) &&
1460             (expected_ack_cnt_delta > 0) &&
1461             (((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta)
1462                 < ACK_CNT_RATIO) &&
1463             (ba_timeout_delta > BA_TIMEOUT_CNT)) {
1464                 IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d,"
1465                                 " expected_ack_cnt = %d\n",
1466                                 actual_ack_cnt_delta, expected_ack_cnt_delta);
1467
1468 #ifdef CONFIG_IWLWIFI_DEBUG
1469                 IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
1470                                 priv->delta_statistics.tx.rx_detected_cnt);
1471                 IWL_DEBUG_RADIO(priv,
1472                                 "ack_or_ba_timeout_collision delta = %d\n",
1473                                 priv->delta_statistics.tx.
1474                                 ack_or_ba_timeout_collision);
1475 #endif
1476                 IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
1477                                 ba_timeout_delta);
1478                 if (!actual_ack_cnt_delta &&
1479                     (ba_timeout_delta >= BA_TIMEOUT_MAX))
1480                         rc = false;
1481         }
1482         return rc;
1483 }
1484
1485
1486 /******************************************************************************
1487  *
1488  * uCode download functions
1489  *
1490  ******************************************************************************/
1491
1492 static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
1493 {
1494         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
1495         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
1496         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1497         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
1498         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1499         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
1500 }
1501
1502 static void iwl_nic_start(struct iwl_priv *priv)
1503 {
1504         /* Remove all resets to allow NIC to operate */
1505         iwl_write32(priv, CSR_RESET, 0);
1506 }
1507
1508
1509 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1510 static int iwl_mac_setup_register(struct iwl_priv *priv);
1511
1512 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1513 {
1514         const char *name_pre = priv->cfg->fw_name_pre;
1515
1516         if (first)
1517                 priv->fw_index = priv->cfg->ucode_api_max;
1518         else
1519                 priv->fw_index--;
1520
1521         if (priv->fw_index < priv->cfg->ucode_api_min) {
1522                 IWL_ERR(priv, "no suitable firmware found!\n");
1523                 return -ENOENT;
1524         }
1525
1526         sprintf(priv->firmware_name, "%s%d%s",
1527                 name_pre, priv->fw_index, ".ucode");
1528
1529         IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
1530                        priv->firmware_name);
1531
1532         return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1533                                        &priv->pci_dev->dev, GFP_KERNEL, priv,
1534                                        iwl_ucode_callback);
1535 }
1536
1537 /**
1538  * iwl_ucode_callback - callback when firmware was loaded
1539  *
1540  * If loaded successfully, copies the firmware into buffers
1541  * for the card to fetch (via DMA).
1542  */
1543 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1544 {
1545         struct iwl_priv *priv = context;
1546         struct iwl_ucode_header *ucode;
1547         const unsigned int api_max = priv->cfg->ucode_api_max;
1548         const unsigned int api_min = priv->cfg->ucode_api_min;
1549         u8 *src;
1550         size_t len;
1551         u32 api_ver, build;
1552         u32 inst_size, data_size, init_size, init_data_size, boot_size;
1553         int err;
1554         u16 eeprom_ver;
1555
1556         if (!ucode_raw) {
1557                 IWL_ERR(priv, "request for firmware file '%s' failed.\n",
1558                         priv->firmware_name);
1559                 goto try_again;
1560         }
1561
1562         IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1563                        priv->firmware_name, ucode_raw->size);
1564
1565         /* Make sure that we got at least the v1 header! */
1566         if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
1567                 IWL_ERR(priv, "File size way too small!\n");
1568                 goto try_again;
1569         }
1570
1571         /* Data from ucode file:  header followed by uCode images */
1572         ucode = (struct iwl_ucode_header *)ucode_raw->data;
1573
1574         priv->ucode_ver = le32_to_cpu(ucode->ver);
1575         api_ver = IWL_UCODE_API(priv->ucode_ver);
1576         build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
1577         inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
1578         data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
1579         init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
1580         init_data_size =
1581                 priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
1582         boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
1583         src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
1584
1585         /* api_ver should match the api version forming part of the
1586          * firmware filename ... but we don't check for that and only rely
1587          * on the API version read from firmware header from here on forward */
1588
1589         if (api_ver < api_min || api_ver > api_max) {
1590                 IWL_ERR(priv, "Driver unable to support your firmware API. "
1591                           "Driver supports v%u, firmware is v%u.\n",
1592                           api_max, api_ver);
1593                 goto try_again;
1594         }
1595
1596         if (api_ver != api_max)
1597                 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
1598                           "got v%u. New firmware can be obtained "
1599                           "from http://www.intellinuxwireless.org.\n",
1600                           api_max, api_ver);
1601
1602         IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
1603                IWL_UCODE_MAJOR(priv->ucode_ver),
1604                IWL_UCODE_MINOR(priv->ucode_ver),
1605                IWL_UCODE_API(priv->ucode_ver),
1606                IWL_UCODE_SERIAL(priv->ucode_ver));
1607
1608         snprintf(priv->hw->wiphy->fw_version,
1609                  sizeof(priv->hw->wiphy->fw_version),
1610                  "%u.%u.%u.%u",
1611                  IWL_UCODE_MAJOR(priv->ucode_ver),
1612                  IWL_UCODE_MINOR(priv->ucode_ver),
1613                  IWL_UCODE_API(priv->ucode_ver),
1614                  IWL_UCODE_SERIAL(priv->ucode_ver));
1615
1616         if (build)
1617                 IWL_DEBUG_INFO(priv, "Build %u\n", build);
1618
1619         eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
1620         IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
1621                        (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
1622                        ? "OTP" : "EEPROM", eeprom_ver);
1623
1624         IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1625                        priv->ucode_ver);
1626         IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
1627                        inst_size);
1628         IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
1629                        data_size);
1630         IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
1631                        init_size);
1632         IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
1633                        init_data_size);
1634         IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
1635                        boot_size);
1636
1637         /*
1638          * For any of the failures below (before allocating pci memory)
1639          * we will try to load a version with a smaller API -- maybe the
1640          * user just got a corrupted version of the latest API.
1641          */
1642
1643         /* Verify size of file vs. image size info in file's header */
1644         if (ucode_raw->size !=
1645                 priv->cfg->ops->ucode->get_header_size(api_ver) +
1646                 inst_size + data_size + init_size +
1647                 init_data_size + boot_size) {
1648
1649                 IWL_DEBUG_INFO(priv,
1650                         "uCode file size %d does not match expected size\n",
1651                         (int)ucode_raw->size);
1652                 goto try_again;
1653         }
1654
1655         /* Verify that uCode images will fit in card's SRAM */
1656         if (inst_size > priv->hw_params.max_inst_size) {
1657                 IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
1658                                inst_size);
1659                 goto try_again;
1660         }
1661
1662         if (data_size > priv->hw_params.max_data_size) {
1663                 IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
1664                                 data_size);
1665                 goto try_again;
1666         }
1667         if (init_size > priv->hw_params.max_inst_size) {
1668                 IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
1669                         init_size);
1670                 goto try_again;
1671         }
1672         if (init_data_size > priv->hw_params.max_data_size) {
1673                 IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
1674                       init_data_size);
1675                 goto try_again;
1676         }
1677         if (boot_size > priv->hw_params.max_bsm_size) {
1678                 IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
1679                         boot_size);
1680                 goto try_again;
1681         }
1682
1683         /* Allocate ucode buffers for card's bus-master loading ... */
1684
1685         /* Runtime instructions and 2 copies of data:
1686          * 1) unmodified from disk
1687          * 2) backup cache for save/restore during power-downs */
1688         priv->ucode_code.len = inst_size;
1689         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
1690
1691         priv->ucode_data.len = data_size;
1692         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
1693
1694         priv->ucode_data_backup.len = data_size;
1695         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1696
1697         if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
1698             !priv->ucode_data_backup.v_addr)
1699                 goto err_pci_alloc;
1700
1701         /* Initialization instructions and data */
1702         if (init_size && init_data_size) {
1703                 priv->ucode_init.len = init_size;
1704                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
1705
1706                 priv->ucode_init_data.len = init_data_size;
1707                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1708
1709                 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
1710                         goto err_pci_alloc;
1711         }
1712
1713         /* Bootstrap (instructions only, no data) */
1714         if (boot_size) {
1715                 priv->ucode_boot.len = boot_size;
1716                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
1717
1718                 if (!priv->ucode_boot.v_addr)
1719                         goto err_pci_alloc;
1720         }
1721
1722         /* Copy images into buffers for card's bus-master reads ... */
1723
1724         /* Runtime instructions (first block of data in file) */
1725         len = inst_size;
1726         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
1727         memcpy(priv->ucode_code.v_addr, src, len);
1728         src += len;
1729
1730         IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
1731                 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
1732
1733         /* Runtime data (2nd block)
1734          * NOTE:  Copy into backup buffer will be done in iwl_up()  */
1735         len = data_size;
1736         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
1737         memcpy(priv->ucode_data.v_addr, src, len);
1738         memcpy(priv->ucode_data_backup.v_addr, src, len);
1739         src += len;
1740
1741         /* Initialization instructions (3rd block) */
1742         if (init_size) {
1743                 len = init_size;
1744                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
1745                                 len);
1746                 memcpy(priv->ucode_init.v_addr, src, len);
1747                 src += len;
1748         }
1749
1750         /* Initialization data (4th block) */
1751         if (init_data_size) {
1752                 len = init_data_size;
1753                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
1754                                len);
1755                 memcpy(priv->ucode_init_data.v_addr, src, len);
1756                 src += len;
1757         }
1758
1759         /* Bootstrap instructions (5th block) */
1760         len = boot_size;
1761         IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
1762         memcpy(priv->ucode_boot.v_addr, src, len);
1763
1764         /**************************************************
1765          * This is still part of probe() in a sense...
1766          *
1767          * 9. Setup and register with mac80211 and debugfs
1768          **************************************************/
1769         err = iwl_mac_setup_register(priv);
1770         if (err)
1771                 goto out_unbind;
1772
1773         err = iwl_dbgfs_register(priv, DRV_NAME);
1774         if (err)
1775                 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1776
1777         /* We have our copies now, allow OS release its copies */
1778         release_firmware(ucode_raw);
1779         complete(&priv->_agn.firmware_loading_complete);
1780         return;
1781
1782  try_again:
1783         /* try next, if any */
1784         if (iwl_request_firmware(priv, false))
1785                 goto out_unbind;
1786         release_firmware(ucode_raw);
1787         return;
1788
1789  err_pci_alloc:
1790         IWL_ERR(priv, "failed to allocate pci memory\n");
1791         iwl_dealloc_ucode_pci(priv);
1792  out_unbind:
1793         complete(&priv->_agn.firmware_loading_complete);
1794         device_release_driver(&priv->pci_dev->dev);
1795         release_firmware(ucode_raw);
1796 }
1797
1798 static const char *desc_lookup_text[] = {
1799         "OK",
1800         "FAIL",
1801         "BAD_PARAM",
1802         "BAD_CHECKSUM",
1803         "NMI_INTERRUPT_WDG",
1804         "SYSASSERT",
1805         "FATAL_ERROR",
1806         "BAD_COMMAND",
1807         "HW_ERROR_TUNE_LOCK",
1808         "HW_ERROR_TEMPERATURE",
1809         "ILLEGAL_CHAN_FREQ",
1810         "VCC_NOT_STABLE",
1811         "FH_ERROR",
1812         "NMI_INTERRUPT_HOST",
1813         "NMI_INTERRUPT_ACTION_PT",
1814         "NMI_INTERRUPT_UNKNOWN",
1815         "UCODE_VERSION_MISMATCH",
1816         "HW_ERROR_ABS_LOCK",
1817         "HW_ERROR_CAL_LOCK_FAIL",
1818         "NMI_INTERRUPT_INST_ACTION_PT",
1819         "NMI_INTERRUPT_DATA_ACTION_PT",
1820         "NMI_TRM_HW_ER",
1821         "NMI_INTERRUPT_TRM",
1822         "NMI_INTERRUPT_BREAK_POINT"
1823         "DEBUG_0",
1824         "DEBUG_1",
1825         "DEBUG_2",
1826         "DEBUG_3",
1827         "ADVANCED SYSASSERT"
1828 };
1829
1830 static const char *desc_lookup(int i)
1831 {
1832         int max = ARRAY_SIZE(desc_lookup_text) - 1;
1833
1834         if (i < 0 || i > max)
1835                 i = max;
1836
1837         return desc_lookup_text[i];
1838 }
1839
1840 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1841 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1842
1843 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1844 {
1845         u32 data2, line;
1846         u32 desc, time, count, base, data1;
1847         u32 blink1, blink2, ilink1, ilink2;
1848         u32 pc, hcmd;
1849
1850         if (priv->ucode_type == UCODE_INIT)
1851                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1852         else
1853                 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1854
1855         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1856                 IWL_ERR(priv,
1857                         "Not valid error log pointer 0x%08X for %s uCode\n",
1858                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1859                 return;
1860         }
1861
1862         count = iwl_read_targ_mem(priv, base);
1863
1864         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1865                 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1866                 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1867                         priv->status, count);
1868         }
1869
1870         desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1871         pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32));
1872         blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1873         blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1874         ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1875         ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1876         data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1877         data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1878         line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1879         time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1880         hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32));
1881
1882         trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
1883                                       blink1, blink2, ilink1, ilink2);
1884
1885         IWL_ERR(priv, "Desc                               Time       "
1886                 "data1      data2      line\n");
1887         IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
1888                 desc_lookup(desc), desc, time, data1, data2, line);
1889         IWL_ERR(priv, "pc      blink1  blink2  ilink1  ilink2  hcmd\n");
1890         IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n",
1891                 pc, blink1, blink2, ilink1, ilink2, hcmd);
1892 }
1893
1894 #define EVENT_START_OFFSET  (4 * sizeof(u32))
1895
1896 /**
1897  * iwl_print_event_log - Dump error event log to syslog
1898  *
1899  */
1900 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1901                                u32 num_events, u32 mode,
1902                                int pos, char **buf, size_t bufsz)
1903 {
1904         u32 i;
1905         u32 base;       /* SRAM byte address of event log header */
1906         u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1907         u32 ptr;        /* SRAM byte address of log data */
1908         u32 ev, time, data; /* event log data */
1909         unsigned long reg_flags;
1910
1911         if (num_events == 0)
1912                 return pos;
1913         if (priv->ucode_type == UCODE_INIT)
1914                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1915         else
1916                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1917
1918         if (mode == 0)
1919                 event_size = 2 * sizeof(u32);
1920         else
1921                 event_size = 3 * sizeof(u32);
1922
1923         ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1924
1925         /* Make sure device is powered up for SRAM reads */
1926         spin_lock_irqsave(&priv->reg_lock, reg_flags);
1927         iwl_grab_nic_access(priv);
1928
1929         /* Set starting address; reads will auto-increment */
1930         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
1931         rmb();
1932
1933         /* "time" is actually "data" for mode 0 (no timestamp).
1934         * place event id # at far right for easier visual parsing. */
1935         for (i = 0; i < num_events; i++) {
1936                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1937                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1938                 if (mode == 0) {
1939                         /* data, ev */
1940                         if (bufsz) {
1941                                 pos += scnprintf(*buf + pos, bufsz - pos,
1942                                                 "EVT_LOG:0x%08x:%04u\n",
1943                                                 time, ev);
1944                         } else {
1945                                 trace_iwlwifi_dev_ucode_event(priv, 0,
1946                                         time, ev);
1947                                 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1948                                         time, ev);
1949                         }
1950                 } else {
1951                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1952                         if (bufsz) {
1953                                 pos += scnprintf(*buf + pos, bufsz - pos,
1954                                                 "EVT_LOGT:%010u:0x%08x:%04u\n",
1955                                                  time, data, ev);
1956                         } else {
1957                                 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1958                                         time, data, ev);
1959                                 trace_iwlwifi_dev_ucode_event(priv, time,
1960                                         data, ev);
1961                         }
1962                 }
1963         }
1964
1965         /* Allow device to power down */
1966         iwl_release_nic_access(priv);
1967         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1968         return pos;
1969 }
1970
1971 /**
1972  * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1973  */
1974 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1975                                     u32 num_wraps, u32 next_entry,
1976                                     u32 size, u32 mode,
1977                                     int pos, char **buf, size_t bufsz)
1978 {
1979         /*
1980          * display the newest DEFAULT_LOG_ENTRIES entries
1981          * i.e the entries just before the next ont that uCode would fill.
1982          */
1983         if (num_wraps) {
1984                 if (next_entry < size) {
1985                         pos = iwl_print_event_log(priv,
1986                                                 capacity - (size - next_entry),
1987                                                 size - next_entry, mode,
1988                                                 pos, buf, bufsz);
1989                         pos = iwl_print_event_log(priv, 0,
1990                                                   next_entry, mode,
1991                                                   pos, buf, bufsz);
1992                 } else
1993                         pos = iwl_print_event_log(priv, next_entry - size,
1994                                                   size, mode, pos, buf, bufsz);
1995         } else {
1996                 if (next_entry < size) {
1997                         pos = iwl_print_event_log(priv, 0, next_entry,
1998                                                   mode, pos, buf, bufsz);
1999                 } else {
2000                         pos = iwl_print_event_log(priv, next_entry - size,
2001                                                   size, mode, pos, buf, bufsz);
2002                 }
2003         }
2004         return pos;
2005 }
2006
2007 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
2008
2009 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
2010                             char **buf, bool display)
2011 {
2012         u32 base;       /* SRAM byte address of event log header */
2013         u32 capacity;   /* event log capacity in # entries */
2014         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
2015         u32 num_wraps;  /* # times uCode wrapped to top of log */
2016         u32 next_entry; /* index of next entry to be written by uCode */
2017         u32 size;       /* # entries that we'll print */
2018         int pos = 0;
2019         size_t bufsz = 0;
2020
2021         if (priv->ucode_type == UCODE_INIT)
2022                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
2023         else
2024                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
2025
2026         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
2027                 IWL_ERR(priv,
2028                         "Invalid event log pointer 0x%08X for %s uCode\n",
2029                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
2030                 return -EINVAL;
2031         }
2032
2033         /* event log header */
2034         capacity = iwl_read_targ_mem(priv, base);
2035         mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
2036         num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
2037         next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
2038
2039         if (capacity > priv->cfg->max_event_log_size) {
2040                 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
2041                         capacity, priv->cfg->max_event_log_size);
2042                 capacity = priv->cfg->max_event_log_size;
2043         }
2044
2045         if (next_entry > priv->cfg->max_event_log_size) {
2046                 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
2047                         next_entry, priv->cfg->max_event_log_size);
2048                 next_entry = priv->cfg->max_event_log_size;
2049         }
2050
2051         size = num_wraps ? capacity : next_entry;
2052
2053         /* bail out if nothing in log */
2054         if (size == 0) {
2055                 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
2056                 return pos;
2057         }
2058
2059 #ifdef CONFIG_IWLWIFI_DEBUG
2060         if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
2061                 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2062                         ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2063 #else
2064         size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2065                 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2066 #endif
2067         IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
2068                 size);
2069
2070 #ifdef CONFIG_IWLWIFI_DEBUG
2071         if (display) {
2072                 if (full_log)
2073                         bufsz = capacity * 48;
2074                 else
2075                         bufsz = size * 48;
2076                 *buf = kmalloc(bufsz, GFP_KERNEL);
2077                 if (!*buf)
2078                         return -ENOMEM;
2079         }
2080         if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
2081                 /*
2082                  * if uCode has wrapped back to top of log,
2083                  * start at the oldest entry,
2084                  * i.e the next one that uCode would fill.
2085                  */
2086                 if (num_wraps)
2087                         pos = iwl_print_event_log(priv, next_entry,
2088                                                 capacity - next_entry, mode,
2089                                                 pos, buf, bufsz);
2090                 /* (then/else) start at top of log */
2091                 pos = iwl_print_event_log(priv, 0,
2092                                           next_entry, mode, pos, buf, bufsz);
2093         } else
2094                 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2095                                                 next_entry, size, mode,
2096                                                 pos, buf, bufsz);
2097 #else
2098         pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2099                                         next_entry, size, mode,
2100                                         pos, buf, bufsz);
2101 #endif
2102         return pos;
2103 }
2104
2105 /**
2106  * iwl_alive_start - called after REPLY_ALIVE notification received
2107  *                   from protocol/runtime uCode (initialization uCode's
2108  *                   Alive gets handled by iwl_init_alive_start()).
2109  */
2110 static void iwl_alive_start(struct iwl_priv *priv)
2111 {
2112         int ret = 0;
2113
2114         IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2115
2116         if (priv->card_alive.is_valid != UCODE_VALID_OK) {
2117                 /* We had an error bringing up the hardware, so take it
2118                  * all the way back down so we can try again */
2119                 IWL_DEBUG_INFO(priv, "Alive failed.\n");
2120                 goto restart;
2121         }
2122
2123         /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2124          * This is a paranoid check, because we would not have gotten the
2125          * "runtime" alive if code weren't properly loaded.  */
2126         if (iwl_verify_ucode(priv)) {
2127                 /* Runtime instruction load was bad;
2128                  * take it all the way back down so we can try again */
2129                 IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
2130                 goto restart;
2131         }
2132
2133         ret = priv->cfg->ops->lib->alive_notify(priv);
2134         if (ret) {
2135                 IWL_WARN(priv,
2136                         "Could not complete ALIVE transition [ntf]: %d\n", ret);
2137                 goto restart;
2138         }
2139
2140         /* After the ALIVE response, we can send host commands to the uCode */
2141         set_bit(STATUS_ALIVE, &priv->status);
2142
2143         if (priv->cfg->ops->lib->recover_from_tx_stall) {
2144                 /* Enable timer to monitor the driver queues */
2145                 mod_timer(&priv->monitor_recover,
2146                         jiffies +
2147                         msecs_to_jiffies(priv->cfg->monitor_recover_period));
2148         }
2149
2150         if (iwl_is_rfkill(priv))
2151                 return;
2152
2153         ieee80211_wake_queues(priv->hw);
2154
2155         priv->active_rate = IWL_RATES_MASK;
2156
2157         /* Configure Tx antenna selection based on H/W config */
2158         if (priv->cfg->ops->hcmd->set_tx_ant)
2159                 priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
2160
2161         if (iwl_is_associated(priv)) {
2162                 struct iwl_rxon_cmd *active_rxon =
2163                                 (struct iwl_rxon_cmd *)&priv->active_rxon;
2164                 /* apply any changes in staging */
2165                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2166                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2167         } else {
2168                 /* Initialize our rx_config data */
2169                 iwl_connection_init_rx_config(priv, priv->iw_mode);
2170
2171                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2172                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2173
2174                 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2175         }
2176
2177         /* Configure Bluetooth device coexistence support */
2178         priv->cfg->ops->hcmd->send_bt_config(priv);
2179
2180         iwl_reset_run_time_calib(priv);
2181
2182         /* Configure the adapter for unassociated operation */
2183         iwlcore_commit_rxon(priv);
2184
2185         /* At this point, the NIC is initialized and operational */
2186         iwl_rf_kill_ct_config(priv);
2187
2188         iwl_leds_init(priv);
2189
2190         IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2191         set_bit(STATUS_READY, &priv->status);
2192         wake_up_interruptible(&priv->wait_command_queue);
2193
2194         iwl_power_update_mode(priv, true);
2195         IWL_DEBUG_INFO(priv, "Updated power mode\n");
2196
2197
2198         return;
2199
2200  restart:
2201         queue_work(priv->workqueue, &priv->restart);
2202 }
2203
2204 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2205
2206 static void __iwl_down(struct iwl_priv *priv)
2207 {
2208         unsigned long flags;
2209         int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
2210
2211         IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2212
2213         if (!exit_pending)
2214                 set_bit(STATUS_EXIT_PENDING, &priv->status);
2215
2216         iwl_clear_ucode_stations(priv, true);
2217
2218         /* Unblock any waiting calls */
2219         wake_up_interruptible_all(&priv->wait_command_queue);
2220
2221         /* Wipe out the EXIT_PENDING status bit if we are not actually
2222          * exiting the module */
2223         if (!exit_pending)
2224                 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2225
2226         /* stop and reset the on-board processor */
2227         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2228
2229         /* tell the device to stop sending interrupts */
2230         spin_lock_irqsave(&priv->lock, flags);
2231         iwl_disable_interrupts(priv);
2232         spin_unlock_irqrestore(&priv->lock, flags);
2233         iwl_synchronize_irq(priv);
2234
2235         if (priv->mac80211_registered)
2236                 ieee80211_stop_queues(priv->hw);
2237
2238         /* If we have not previously called iwl_init() then
2239          * clear all bits but the RF Kill bit and return */
2240         if (!iwl_is_init(priv)) {
2241                 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2242                                         STATUS_RF_KILL_HW |
2243                                test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2244                                         STATUS_GEO_CONFIGURED |
2245                                test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2246                                         STATUS_EXIT_PENDING;
2247                 goto exit;
2248         }
2249
2250         /* ...otherwise clear out all the status bits but the RF Kill
2251          * bit and continue taking the NIC down. */
2252         priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2253                                 STATUS_RF_KILL_HW |
2254                         test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2255                                 STATUS_GEO_CONFIGURED |
2256                         test_bit(STATUS_FW_ERROR, &priv->status) <<
2257                                 STATUS_FW_ERROR |
2258                        test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2259                                 STATUS_EXIT_PENDING;
2260
2261         /* device going down, Stop using ICT table */
2262         iwl_disable_ict(priv);
2263
2264         iwlagn_txq_ctx_stop(priv);
2265         iwlagn_rxq_stop(priv);
2266
2267         /* Power-down device's busmaster DMA clocks */
2268         iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2269         udelay(5);
2270
2271         /* Make sure (redundant) we've released our request to stay awake */
2272         iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2273
2274         /* Stop the device, and put it in low power state */
2275         priv->cfg->ops->lib->apm_ops.stop(priv);
2276
2277  exit:
2278         memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
2279
2280         if (priv->ibss_beacon)
2281                 dev_kfree_skb(priv->ibss_beacon);
2282         priv->ibss_beacon = NULL;
2283
2284         /* clear out any free frames */
2285         iwl_clear_free_frames(priv);
2286 }
2287
2288 static void iwl_down(struct iwl_priv *priv)
2289 {
2290         mutex_lock(&priv->mutex);
2291         __iwl_down(priv);
2292         mutex_unlock(&priv->mutex);
2293
2294         iwl_cancel_deferred_work(priv);
2295 }
2296
2297 #define HW_READY_TIMEOUT (50)
2298
2299 static int iwl_set_hw_ready(struct iwl_priv *priv)
2300 {
2301         int ret = 0;
2302
2303         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2304                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2305
2306         /* See if we got it */
2307         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2308                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2309                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2310                                 HW_READY_TIMEOUT);
2311         if (ret != -ETIMEDOUT)
2312                 priv->hw_ready = true;
2313         else
2314                 priv->hw_ready = false;
2315
2316         IWL_DEBUG_INFO(priv, "hardware %s\n",
2317                       (priv->hw_ready == 1) ? "ready" : "not ready");
2318         return ret;
2319 }
2320
2321 static int iwl_prepare_card_hw(struct iwl_priv *priv)
2322 {
2323         int ret = 0;
2324
2325         IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
2326
2327         ret = iwl_set_hw_ready(priv);
2328         if (priv->hw_ready)
2329                 return ret;
2330
2331         /* If HW is not ready, prepare the conditions to check again */
2332         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2333                         CSR_HW_IF_CONFIG_REG_PREPARE);
2334
2335         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2336                         ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2337                         CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2338
2339         /* HW should be ready by now, check again. */
2340         if (ret != -ETIMEDOUT)
2341                 iwl_set_hw_ready(priv);
2342
2343         return ret;
2344 }
2345
2346 #define MAX_HW_RESTARTS 5
2347
2348 static int __iwl_up(struct iwl_priv *priv)
2349 {
2350         int i;
2351         int ret;
2352
2353         if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2354                 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2355                 return -EIO;
2356         }
2357
2358         if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
2359                 IWL_ERR(priv, "ucode not available for device bringup\n");
2360                 return -EIO;
2361         }
2362
2363         iwl_prepare_card_hw(priv);
2364
2365         if (!priv->hw_ready) {
2366                 IWL_WARN(priv, "Exit HW not ready\n");
2367                 return -EIO;
2368         }
2369
2370         /* If platform's RF_KILL switch is NOT set to KILL */
2371         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2372                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
2373         else
2374                 set_bit(STATUS_RF_KILL_HW, &priv->status);
2375
2376         if (iwl_is_rfkill(priv)) {
2377                 wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
2378
2379                 iwl_enable_interrupts(priv);
2380                 IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
2381                 return 0;
2382         }
2383
2384         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2385
2386         ret = iwlagn_hw_nic_init(priv);
2387         if (ret) {
2388                 IWL_ERR(priv, "Unable to init nic\n");
2389                 return ret;
2390         }
2391
2392         /* make sure rfkill handshake bits are cleared */
2393         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2394         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
2395                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2396
2397         /* clear (again), then enable host interrupts */
2398         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2399         iwl_enable_interrupts(priv);
2400
2401         /* really make sure rfkill handshake bits are cleared */
2402         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2403         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2404
2405         /* Copy original ucode data image from disk into backup cache.
2406          * This will be used to initialize the on-board processor's
2407          * data SRAM for a clean start when the runtime program first loads. */
2408         memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
2409                priv->ucode_data.len);
2410
2411         for (i = 0; i < MAX_HW_RESTARTS; i++) {
2412
2413                 /* load bootstrap state machine,
2414                  * load bootstrap program into processor's memory,
2415                  * prepare to load the "initialize" uCode */
2416                 ret = priv->cfg->ops->lib->load_ucode(priv);
2417
2418                 if (ret) {
2419                         IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
2420                                 ret);
2421                         continue;
2422                 }
2423
2424                 /* start card; "initialize" will load runtime ucode */
2425                 iwl_nic_start(priv);
2426
2427                 IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
2428
2429                 return 0;
2430         }
2431
2432         set_bit(STATUS_EXIT_PENDING, &priv->status);
2433         __iwl_down(priv);
2434         clear_bit(STATUS_EXIT_PENDING, &priv->status);
2435
2436         /* tried to restart and config the device for as long as our
2437          * patience could withstand */
2438         IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
2439         return -EIO;
2440 }
2441
2442
2443 /*****************************************************************************
2444  *
2445  * Workqueue callbacks
2446  *
2447  *****************************************************************************/
2448
2449 static void iwl_bg_init_alive_start(struct work_struct *data)
2450 {
2451         struct iwl_priv *priv =
2452             container_of(data, struct iwl_priv, init_alive_start.work);
2453
2454         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2455                 return;
2456
2457         mutex_lock(&priv->mutex);
2458         priv->cfg->ops->lib->init_alive_start(priv);
2459         mutex_unlock(&priv->mutex);
2460 }
2461
2462 static void iwl_bg_alive_start(struct work_struct *data)
2463 {
2464         struct iwl_priv *priv =
2465             container_of(data, struct iwl_priv, alive_start.work);
2466
2467         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2468                 return;
2469
2470         /* enable dram interrupt */
2471         iwl_reset_ict(priv);
2472
2473         mutex_lock(&priv->mutex);
2474         iwl_alive_start(priv);
2475         mutex_unlock(&priv->mutex);
2476 }
2477
2478 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2479 {
2480         struct iwl_priv *priv = container_of(work, struct iwl_priv,
2481                         run_time_calib_work);
2482
2483         mutex_lock(&priv->mutex);
2484
2485         if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2486             test_bit(STATUS_SCANNING, &priv->status)) {
2487                 mutex_unlock(&priv->mutex);
2488                 return;
2489         }
2490
2491         if (priv->start_calib) {
2492                 iwl_chain_noise_calibration(priv, &priv->statistics);
2493
2494                 iwl_sensitivity_calibration(priv, &priv->statistics);
2495         }
2496
2497         mutex_unlock(&priv->mutex);
2498         return;
2499 }
2500
2501 static void iwl_bg_restart(struct work_struct *data)
2502 {
2503         struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
2504
2505         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2506                 return;
2507
2508         if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
2509                 mutex_lock(&priv->mutex);
2510                 priv->vif = NULL;
2511                 priv->is_open = 0;
2512                 mutex_unlock(&priv->mutex);
2513                 iwl_down(priv);
2514                 ieee80211_restart_hw(priv->hw);
2515         } else {
2516                 iwl_down(priv);
2517
2518                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2519                         return;
2520
2521                 mutex_lock(&priv->mutex);
2522                 __iwl_up(priv);
2523                 mutex_unlock(&priv->mutex);
2524         }
2525 }
2526
2527 static void iwl_bg_rx_replenish(struct work_struct *data)
2528 {
2529         struct iwl_priv *priv =
2530             container_of(data, struct iwl_priv, rx_replenish);
2531
2532         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2533                 return;
2534
2535         mutex_lock(&priv->mutex);
2536         iwlagn_rx_replenish(priv);
2537         mutex_unlock(&priv->mutex);
2538 }
2539
2540 #define IWL_DELAY_NEXT_SCAN (HZ*2)
2541
2542 void iwl_post_associate(struct iwl_priv *priv)
2543 {
2544         struct ieee80211_conf *conf = NULL;
2545         int ret = 0;
2546
2547         if (priv->iw_mode == NL80211_IFTYPE_AP) {
2548                 IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
2549                 return;
2550         }
2551
2552         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2553                 return;
2554
2555
2556         if (!priv->vif || !priv->is_open)
2557                 return;
2558
2559         iwl_scan_cancel_timeout(priv, 200);
2560
2561         conf = ieee80211_get_hw_conf(priv->hw);
2562
2563         priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2564         iwlcore_commit_rxon(priv);
2565
2566         iwl_setup_rxon_timing(priv);
2567         ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2568                               sizeof(priv->rxon_timing), &priv->rxon_timing);
2569         if (ret)
2570                 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2571                             "Attempting to continue.\n");
2572
2573         priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2574
2575         iwl_set_rxon_ht(priv, &priv->current_ht_config);
2576
2577         if (priv->cfg->ops->hcmd->set_rxon_chain)
2578                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2579
2580         priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2581
2582         IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
2583                         priv->assoc_id, priv->beacon_int);
2584
2585         if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2586                 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2587         else
2588                 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2589
2590         if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2591                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2592                         priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2593                 else
2594                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2595
2596                 if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2597                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2598
2599         }
2600
2601         iwlcore_commit_rxon(priv);
2602
2603         IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
2604                         priv->assoc_id, priv->active_rxon.bssid_addr);
2605
2606         switch (priv->iw_mode) {
2607         case NL80211_IFTYPE_STATION:
2608                 break;
2609
2610         case NL80211_IFTYPE_ADHOC:
2611
2612                 /* assume default assoc id */
2613                 priv->assoc_id = 1;
2614
2615                 iwl_add_local_station(priv, priv->bssid, true);
2616                 iwl_send_beacon_cmd(priv);
2617
2618                 break;
2619
2620         default:
2621                 IWL_ERR(priv, "%s Should not be called in %d mode\n",
2622                           __func__, priv->iw_mode);
2623                 break;
2624         }
2625
2626         /* the chain noise calibration will enabled PM upon completion
2627          * If chain noise has already been run, then we need to enable
2628          * power management here */
2629         if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
2630                 iwl_power_update_mode(priv, false);
2631
2632         /* Enable Rx differential gain and sensitivity calibrations */
2633         iwl_chain_noise_reset(priv);
2634         priv->start_calib = 1;
2635
2636 }
2637
2638 /*****************************************************************************
2639  *
2640  * mac80211 entry point functions
2641  *
2642  *****************************************************************************/
2643
2644 #define UCODE_READY_TIMEOUT     (4 * HZ)
2645
2646 /*
2647  * Not a mac80211 entry point function, but it fits in with all the
2648  * other mac80211 functions grouped here.
2649  */
2650 static int iwl_mac_setup_register(struct iwl_priv *priv)
2651 {
2652         int ret;
2653         struct ieee80211_hw *hw = priv->hw;
2654         hw->rate_control_algorithm = "iwl-agn-rs";
2655
2656         /* Tell mac80211 our characteristics */
2657         hw->flags = IEEE80211_HW_SIGNAL_DBM |
2658                     IEEE80211_HW_AMPDU_AGGREGATION |
2659                     IEEE80211_HW_SPECTRUM_MGMT;
2660
2661         if (!priv->cfg->broken_powersave)
2662                 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2663                              IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2664
2665         if (priv->cfg->sku & IWL_SKU_N)
2666                 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2667                              IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2668
2669         hw->sta_data_size = sizeof(struct iwl_station_priv);
2670         hw->wiphy->interface_modes =
2671                 BIT(NL80211_IFTYPE_STATION) |
2672                 BIT(NL80211_IFTYPE_ADHOC);
2673
2674         hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
2675                             WIPHY_FLAG_DISABLE_BEACON_HINTS;
2676
2677         /*
2678          * For now, disable PS by default because it affects
2679          * RX performance significantly.
2680          */
2681         hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2682
2683         hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
2684         /* we create the 802.11 header and a zero-length SSID element */
2685         hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
2686
2687         /* Default value; 4 EDCA QOS priorities */
2688         hw->queues = 4;
2689
2690         hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2691
2692         if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2693                 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2694                         &priv->bands[IEEE80211_BAND_2GHZ];
2695         if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2696                 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2697                         &priv->bands[IEEE80211_BAND_5GHZ];
2698
2699         ret = ieee80211_register_hw(priv->hw);
2700         if (ret) {
2701                 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2702                 return ret;
2703         }
2704         priv->mac80211_registered = 1;
2705
2706         return 0;
2707 }
2708
2709
2710 static int iwl_mac_start(struct ieee80211_hw *hw)
2711 {
2712         struct iwl_priv *priv = hw->priv;
2713         int ret;
2714
2715         IWL_DEBUG_MAC80211(priv, "enter\n");
2716
2717         /* we should be verifying the device is ready to be opened */
2718         mutex_lock(&priv->mutex);
2719         ret = __iwl_up(priv);
2720         mutex_unlock(&priv->mutex);
2721
2722         if (ret)
2723                 return ret;
2724
2725         if (iwl_is_rfkill(priv))
2726                 goto out;
2727
2728         IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2729
2730         /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
2731          * mac80211 will not be run successfully. */
2732         ret = wait_event_interruptible_timeout(priv->wait_command_queue,
2733                         test_bit(STATUS_READY, &priv->status),
2734                         UCODE_READY_TIMEOUT);
2735         if (!ret) {
2736                 if (!test_bit(STATUS_READY, &priv->status)) {
2737                         IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
2738                                 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2739                         return -ETIMEDOUT;
2740                 }
2741         }
2742
2743         iwl_led_start(priv);
2744
2745 out:
2746         priv->is_open = 1;
2747         IWL_DEBUG_MAC80211(priv, "leave\n");
2748         return 0;
2749 }
2750
2751 static void iwl_mac_stop(struct ieee80211_hw *hw)
2752 {
2753         struct iwl_priv *priv = hw->priv;
2754
2755         IWL_DEBUG_MAC80211(priv, "enter\n");
2756
2757         if (!priv->is_open)
2758                 return;
2759
2760         priv->is_open = 0;
2761
2762         if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
2763                 /* stop mac, cancel any scan request and clear
2764                  * RXON_FILTER_ASSOC_MSK BIT
2765                  */
2766                 mutex_lock(&priv->mutex);
2767                 iwl_scan_cancel_timeout(priv, 100);
2768                 mutex_unlock(&priv->mutex);
2769         }
2770
2771         iwl_down(priv);
2772
2773         flush_workqueue(priv->workqueue);
2774
2775         /* enable interrupts again in order to receive rfkill changes */
2776         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2777         iwl_enable_interrupts(priv);
2778
2779         IWL_DEBUG_MAC80211(priv, "leave\n");
2780 }
2781
2782 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2783 {
2784         struct iwl_priv *priv = hw->priv;
2785
2786         IWL_DEBUG_MACDUMP(priv, "enter\n");
2787
2788         IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2789                      ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2790
2791         if (iwlagn_tx_skb(priv, skb))
2792                 dev_kfree_skb_any(skb);
2793
2794         IWL_DEBUG_MACDUMP(priv, "leave\n");
2795         return NETDEV_TX_OK;
2796 }
2797
2798 void iwl_config_ap(struct iwl_priv *priv)
2799 {
2800         int ret = 0;
2801
2802         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2803                 return;
2804
2805         /* The following should be done only at AP bring up */
2806         if (!iwl_is_associated(priv)) {
2807
2808                 /* RXON - unassoc (to set timing command) */
2809                 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2810                 iwlcore_commit_rxon(priv);
2811
2812                 /* RXON Timing */
2813                 iwl_setup_rxon_timing(priv);
2814                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2815                                 sizeof(priv->rxon_timing), &priv->rxon_timing);
2816                 if (ret)
2817                         IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2818                                         "Attempting to continue.\n");
2819
2820                 /* AP has all antennas */
2821                 priv->chain_noise_data.active_chains =
2822                         priv->hw_params.valid_rx_ant;
2823                 iwl_set_rxon_ht(priv, &priv->current_ht_config);
2824                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2825                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2826
2827                 /* FIXME: what should be the assoc_id for AP? */
2828                 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2829                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2830                         priv->staging_rxon.flags |=
2831                                 RXON_FLG_SHORT_PREAMBLE_MSK;
2832                 else
2833                         priv->staging_rxon.flags &=
2834                                 ~RXON_FLG_SHORT_PREAMBLE_MSK;
2835
2836                 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2837                         if (priv->assoc_capability &
2838                                 WLAN_CAPABILITY_SHORT_SLOT_TIME)
2839                                 priv->staging_rxon.flags |=
2840                                         RXON_FLG_SHORT_SLOT_MSK;
2841                         else
2842                                 priv->staging_rxon.flags &=
2843                                         ~RXON_FLG_SHORT_SLOT_MSK;
2844
2845                         if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2846                                 priv->staging_rxon.flags &=
2847                                         ~RXON_FLG_SHORT_SLOT_MSK;
2848                 }
2849                 /* restore RXON assoc */
2850                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2851                 iwlcore_commit_rxon(priv);
2852                 iwl_add_bcast_station(priv);
2853         }
2854         iwl_send_beacon_cmd(priv);
2855
2856         /* FIXME - we need to add code here to detect a totally new
2857          * configuration, reset the AP, unassoc, rxon timing, assoc,
2858          * clear sta table, add BCAST sta... */
2859 }
2860
2861 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
2862                                     struct ieee80211_vif *vif,
2863                                     struct ieee80211_key_conf *keyconf,
2864                                     struct ieee80211_sta *sta,
2865                                     u32 iv32, u16 *phase1key)
2866 {
2867
2868         struct iwl_priv *priv = hw->priv;
2869         IWL_DEBUG_MAC80211(priv, "enter\n");
2870
2871         iwl_update_tkip_key(priv, keyconf,
2872                             sta ? sta->addr : iwl_bcast_addr,
2873                             iv32, phase1key);
2874
2875         IWL_DEBUG_MAC80211(priv, "leave\n");
2876 }
2877
2878 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2879                            struct ieee80211_vif *vif,
2880                            struct ieee80211_sta *sta,
2881                            struct ieee80211_key_conf *key)
2882 {
2883         struct iwl_priv *priv = hw->priv;
2884         const u8 *addr;
2885         int ret;
2886         u8 sta_id;
2887         bool is_default_wep_key = false;
2888
2889         IWL_DEBUG_MAC80211(priv, "enter\n");
2890
2891         if (priv->cfg->mod_params->sw_crypto) {
2892                 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2893                 return -EOPNOTSUPP;
2894         }
2895         addr = sta ? sta->addr : iwl_bcast_addr;
2896         sta_id = iwl_find_station(priv, addr);
2897         if (sta_id == IWL_INVALID_STATION) {
2898                 IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
2899                                    addr);
2900                 return -EINVAL;
2901
2902         }
2903
2904         mutex_lock(&priv->mutex);
2905         iwl_scan_cancel_timeout(priv, 100);
2906
2907         /*
2908          * If we are getting WEP group key and we didn't receive any key mapping
2909          * so far, we are in legacy wep mode (group key only), otherwise we are
2910          * in 1X mode.
2911          * In legacy wep mode, we use another host command to the uCode.
2912          */
2913         if (key->alg == ALG_WEP && !sta && vif->type != NL80211_IFTYPE_AP) {
2914                 if (cmd == SET_KEY)
2915                         is_default_wep_key = !priv->key_mapping_key;
2916                 else
2917                         is_default_wep_key =
2918                                         (key->hw_key_idx == HW_KEY_DEFAULT);
2919         }
2920
2921         switch (cmd) {
2922         case SET_KEY:
2923                 if (is_default_wep_key)
2924                         ret = iwl_set_default_wep_key(priv, key);
2925                 else
2926                         ret = iwl_set_dynamic_key(priv, key, sta_id);
2927
2928                 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2929                 break;
2930         case DISABLE_KEY:
2931                 if (is_default_wep_key)
2932                         ret = iwl_remove_default_wep_key(priv, key);
2933                 else
2934                         ret = iwl_remove_dynamic_key(priv, key, sta_id);
2935
2936                 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2937                 break;
2938         default:
2939                 ret = -EINVAL;
2940         }
2941
2942         mutex_unlock(&priv->mutex);
2943         IWL_DEBUG_MAC80211(priv, "leave\n");
2944
2945         return ret;
2946 }
2947
2948 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
2949                                 struct ieee80211_vif *vif,
2950                              enum ieee80211_ampdu_mlme_action action,
2951                              struct ieee80211_sta *sta, u16 tid, u16 *ssn)
2952 {
2953         struct iwl_priv *priv = hw->priv;
2954         int ret;
2955
2956         IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2957                      sta->addr, tid);
2958
2959         if (!(priv->cfg->sku & IWL_SKU_N))
2960                 return -EACCES;
2961
2962         switch (action) {
2963         case IEEE80211_AMPDU_RX_START:
2964                 IWL_DEBUG_HT(priv, "start Rx\n");
2965                 return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
2966         case IEEE80211_AMPDU_RX_STOP:
2967                 IWL_DEBUG_HT(priv, "stop Rx\n");
2968                 ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid);
2969                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2970                         return 0;
2971                 else
2972                         return ret;
2973         case IEEE80211_AMPDU_TX_START:
2974                 IWL_DEBUG_HT(priv, "start Tx\n");
2975                 ret = iwlagn_tx_agg_start(priv, sta->addr, tid, ssn);
2976                 if (ret == 0) {
2977                         priv->_agn.agg_tids_count++;
2978                         IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2979                                      priv->_agn.agg_tids_count);
2980                 }
2981                 return ret;
2982         case IEEE80211_AMPDU_TX_STOP:
2983                 IWL_DEBUG_HT(priv, "stop Tx\n");
2984                 ret = iwlagn_tx_agg_stop(priv, sta->addr, tid);
2985                 if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
2986                         priv->_agn.agg_tids_count--;
2987                         IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2988                                      priv->_agn.agg_tids_count);
2989                 }
2990                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2991                         return 0;
2992                 else
2993                         return ret;
2994         case IEEE80211_AMPDU_TX_OPERATIONAL:
2995                 /* do nothing */
2996                 return -EOPNOTSUPP;
2997         default:
2998                 IWL_DEBUG_HT(priv, "unknown\n");
2999                 return -EINVAL;
3000                 break;
3001         }
3002         return 0;
3003 }
3004
3005 static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
3006                                struct ieee80211_vif *vif,
3007                                enum sta_notify_cmd cmd,
3008                                struct ieee80211_sta *sta)
3009 {
3010         struct iwl_priv *priv = hw->priv;
3011         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3012         int sta_id;
3013
3014         switch (cmd) {
3015         case STA_NOTIFY_SLEEP:
3016                 WARN_ON(!sta_priv->client);
3017                 sta_priv->asleep = true;
3018                 if (atomic_read(&sta_priv->pending_frames) > 0)
3019                         ieee80211_sta_block_awake(hw, sta, true);
3020                 break;
3021         case STA_NOTIFY_AWAKE:
3022                 WARN_ON(!sta_priv->client);
3023                 if (!sta_priv->asleep)
3024                         break;
3025                 sta_priv->asleep = false;
3026                 sta_id = iwl_find_station(priv, sta->addr);
3027                 if (sta_id != IWL_INVALID_STATION)
3028                         iwl_sta_modify_ps_wake(priv, sta_id);
3029                 break;
3030         default:
3031                 break;
3032         }
3033 }
3034
3035 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
3036                               struct ieee80211_vif *vif,
3037                               struct ieee80211_sta *sta)
3038 {
3039         struct iwl_priv *priv = hw->priv;
3040         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3041         bool is_ap = priv->iw_mode == NL80211_IFTYPE_STATION;
3042         int ret;
3043         u8 sta_id;
3044
3045         IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
3046                         sta->addr);
3047
3048         atomic_set(&sta_priv->pending_frames, 0);
3049         if (vif->type == NL80211_IFTYPE_AP)
3050                 sta_priv->client = true;
3051
3052         ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
3053                                      &sta_id);
3054         if (ret) {
3055                 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
3056                         sta->addr, ret);
3057                 /* Should we return success if return code is EEXIST ? */
3058                 return ret;
3059         }
3060
3061         /* Initialize rate scaling */
3062         IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
3063                        sta->addr);
3064         iwl_rs_rate_init(priv, sta, sta_id);
3065
3066         return ret;
3067 }
3068
3069 /*****************************************************************************
3070  *
3071  * sysfs attributes
3072  *
3073  *****************************************************************************/
3074
3075 #ifdef CONFIG_IWLWIFI_DEBUG
3076
3077 /*
3078  * The following adds a new attribute to the sysfs representation
3079  * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
3080  * used for controlling the debug level.
3081  *
3082  * See the level definitions in iwl for details.
3083  *
3084  * The debug_level being managed using sysfs below is a per device debug
3085  * level that is used instead of the global debug level if it (the per
3086  * device debug level) is set.
3087  */
3088 static ssize_t show_debug_level(struct device *d,
3089                                 struct device_attribute *attr, char *buf)
3090 {
3091         struct iwl_priv *priv = dev_get_drvdata(d);
3092         return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
3093 }
3094 static ssize_t store_debug_level(struct device *d,
3095                                 struct device_attribute *attr,
3096                                  const char *buf, size_t count)
3097 {
3098         struct iwl_priv *priv = dev_get_drvdata(d);
3099         unsigned long val;
3100         int ret;
3101
3102         ret = strict_strtoul(buf, 0, &val);
3103         if (ret)
3104                 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
3105         else {
3106                 priv->debug_level = val;
3107                 if (iwl_alloc_traffic_mem(priv))
3108                         IWL_ERR(priv,
3109                                 "Not enough memory to generate traffic log\n");
3110         }
3111         return strnlen(buf, count);
3112 }
3113
3114 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
3115                         show_debug_level, store_debug_level);
3116
3117
3118 #endif /* CONFIG_IWLWIFI_DEBUG */
3119
3120
3121 static ssize_t show_temperature(struct device *d,
3122                                 struct device_attribute *attr, char *buf)
3123 {
3124         struct iwl_priv *priv = dev_get_drvdata(d);
3125
3126         if (!iwl_is_alive(priv))
3127                 return -EAGAIN;
3128
3129         return sprintf(buf, "%d\n", priv->temperature);
3130 }
3131
3132 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
3133
3134 static ssize_t show_tx_power(struct device *d,
3135                              struct device_attribute *attr, char *buf)
3136 {
3137         struct iwl_priv *priv = dev_get_drvdata(d);
3138
3139         if (!iwl_is_ready_rf(priv))
3140                 return sprintf(buf, "off\n");
3141         else
3142                 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
3143 }
3144
3145 static ssize_t store_tx_power(struct device *d,
3146                               struct device_attribute *attr,
3147                               const char *buf, size_t count)
3148 {
3149         struct iwl_priv *priv = dev_get_drvdata(d);
3150         unsigned long val;
3151         int ret;
3152
3153         ret = strict_strtoul(buf, 10, &val);
3154         if (ret)
3155                 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
3156         else {
3157                 ret = iwl_set_tx_power(priv, val, false);
3158                 if (ret)
3159                         IWL_ERR(priv, "failed setting tx power (0x%d).\n",
3160                                 ret);
3161                 else
3162                         ret = count;
3163         }
3164         return ret;
3165 }
3166
3167 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
3168
3169 static ssize_t show_rts_ht_protection(struct device *d,
3170                              struct device_attribute *attr, char *buf)
3171 {
3172         struct iwl_priv *priv = dev_get_drvdata(d);
3173
3174         return sprintf(buf, "%s\n",
3175                 priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
3176 }
3177
3178 static ssize_t store_rts_ht_protection(struct device *d,
3179                               struct device_attribute *attr,
3180                               const char *buf, size_t count)
3181 {
3182         struct iwl_priv *priv = dev_get_drvdata(d);
3183         unsigned long val;
3184         int ret;
3185
3186         ret = strict_strtoul(buf, 10, &val);
3187         if (ret)
3188                 IWL_INFO(priv, "Input is not in decimal form.\n");
3189         else {
3190                 if (!iwl_is_associated(priv))
3191                         priv->cfg->use_rts_for_ht = val ? true : false;
3192                 else
3193                         IWL_ERR(priv, "Sta associated with AP - "
3194                                 "Change protection mechanism is not allowed\n");
3195                 ret = count;
3196         }
3197         return ret;
3198 }
3199
3200 static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
3201                         show_rts_ht_protection, store_rts_ht_protection);
3202
3203
3204 /*****************************************************************************
3205  *
3206  * driver setup and teardown
3207  *
3208  *****************************************************************************/
3209
3210 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3211 {
3212         priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3213
3214         init_waitqueue_head(&priv->wait_command_queue);
3215
3216         INIT_WORK(&priv->restart, iwl_bg_restart);
3217         INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3218         INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3219         INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3220         INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
3221         INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
3222
3223         iwl_setup_scan_deferred_work(priv);
3224
3225         if (priv->cfg->ops->lib->setup_deferred_work)
3226                 priv->cfg->ops->lib->setup_deferred_work(priv);
3227
3228         init_timer(&priv->statistics_periodic);
3229         priv->statistics_periodic.data = (unsigned long)priv;
3230         priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3231
3232         init_timer(&priv->ucode_trace);
3233         priv->ucode_trace.data = (unsigned long)priv;
3234         priv->ucode_trace.function = iwl_bg_ucode_trace;
3235
3236         if (priv->cfg->ops->lib->recover_from_tx_stall) {
3237                 init_timer(&priv->monitor_recover);
3238                 priv->monitor_recover.data = (unsigned long)priv;
3239                 priv->monitor_recover.function =
3240                         priv->cfg->ops->lib->recover_from_tx_stall;
3241         }
3242
3243         if (!priv->cfg->use_isr_legacy)
3244                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3245                         iwl_irq_tasklet, (unsigned long)priv);
3246         else
3247                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3248                         iwl_irq_tasklet_legacy, (unsigned long)priv);
3249 }
3250
3251 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3252 {
3253         if (priv->cfg->ops->lib->cancel_deferred_work)
3254                 priv->cfg->ops->lib->cancel_deferred_work(priv);
3255
3256         cancel_delayed_work_sync(&priv->init_alive_start);
3257         cancel_delayed_work(&priv->scan_check);
3258         cancel_work_sync(&priv->start_internal_scan);
3259         cancel_delayed_work(&priv->alive_start);
3260         cancel_work_sync(&priv->beacon_update);
3261         del_timer_sync(&priv->statistics_periodic);
3262         del_timer_sync(&priv->ucode_trace);
3263         if (priv->cfg->ops->lib->recover_from_tx_stall)
3264                 del_timer_sync(&priv->monitor_recover);
3265 }
3266
3267 static void iwl_init_hw_rates(struct iwl_priv *priv,
3268                               struct ieee80211_rate *rates)
3269 {
3270         int i;
3271
3272         for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3273                 rates[i].bitrate = iwl_rates[i].ieee * 5;
3274                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3275                 rates[i].hw_value_short = i;
3276                 rates[i].flags = 0;
3277                 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3278                         /*
3279                          * If CCK != 1M then set short preamble rate flag.
3280                          */
3281                         rates[i].flags |=
3282                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3283                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
3284                 }
3285         }
3286 }
3287
3288 static int iwl_init_drv(struct iwl_priv *priv)
3289 {
3290         int ret;
3291
3292         priv->ibss_beacon = NULL;
3293
3294         spin_lock_init(&priv->sta_lock);
3295         spin_lock_init(&priv->hcmd_lock);
3296
3297         INIT_LIST_HEAD(&priv->free_frames);
3298
3299         mutex_init(&priv->mutex);
3300         mutex_init(&priv->sync_cmd_mutex);
3301
3302         priv->ieee_channels = NULL;
3303         priv->ieee_rates = NULL;
3304         priv->band = IEEE80211_BAND_2GHZ;
3305
3306         priv->iw_mode = NL80211_IFTYPE_STATION;
3307         priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3308         priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3309         priv->_agn.agg_tids_count = 0;
3310
3311         /* initialize force reset */
3312         priv->force_reset[IWL_RF_RESET].reset_duration =
3313                 IWL_DELAY_NEXT_FORCE_RF_RESET;
3314         priv->force_reset[IWL_FW_RESET].reset_duration =
3315                 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3316
3317         /* Choose which receivers/antennas to use */
3318         if (priv->cfg->ops->hcmd->set_rxon_chain)
3319                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3320
3321         iwl_init_scan_params(priv);
3322
3323         /* Set the tx_power_user_lmt to the lowest power level
3324          * this value will get overwritten by channel max power avg
3325          * from eeprom */
3326         priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
3327
3328         ret = iwl_init_channel_map(priv);
3329         if (ret) {
3330                 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3331                 goto err;
3332         }
3333
3334         ret = iwlcore_init_geos(priv);
3335         if (ret) {
3336                 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3337                 goto err_free_channel_map;
3338         }
3339         iwl_init_hw_rates(priv, priv->ieee_rates);
3340
3341         return 0;
3342
3343 err_free_channel_map:
3344         iwl_free_channel_map(priv);
3345 err:
3346         return ret;
3347 }
3348
3349 static void iwl_uninit_drv(struct iwl_priv *priv)
3350 {
3351         iwl_calib_free_results(priv);
3352         iwlcore_free_geos(priv);
3353         iwl_free_channel_map(priv);
3354         kfree(priv->scan_cmd);
3355 }
3356
3357 static struct attribute *iwl_sysfs_entries[] = {
3358         &dev_attr_temperature.attr,
3359         &dev_attr_tx_power.attr,
3360         &dev_attr_rts_ht_protection.attr,
3361 #ifdef CONFIG_IWLWIFI_DEBUG
3362         &dev_attr_debug_level.attr,
3363 #endif
3364         NULL
3365 };
3366
3367 static struct attribute_group iwl_attribute_group = {
3368         .name = NULL,           /* put in device directory */
3369         .attrs = iwl_sysfs_entries,
3370 };
3371
3372 static struct ieee80211_ops iwl_hw_ops = {
3373         .tx = iwl_mac_tx,
3374         .start = iwl_mac_start,
3375         .stop = iwl_mac_stop,
3376         .add_interface = iwl_mac_add_interface,
3377         .remove_interface = iwl_mac_remove_interface,
3378         .config = iwl_mac_config,
3379         .configure_filter = iwl_configure_filter,
3380         .set_key = iwl_mac_set_key,
3381         .update_tkip_key = iwl_mac_update_tkip_key,
3382         .conf_tx = iwl_mac_conf_tx,
3383         .reset_tsf = iwl_mac_reset_tsf,
3384         .bss_info_changed = iwl_bss_info_changed,
3385         .ampdu_action = iwl_mac_ampdu_action,
3386         .hw_scan = iwl_mac_hw_scan,
3387         .sta_notify = iwl_mac_sta_notify,
3388         .sta_add = iwlagn_mac_sta_add,
3389         .sta_remove = iwl_mac_sta_remove,
3390 };
3391
3392 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3393 {
3394         int err = 0;
3395         struct iwl_priv *priv;
3396         struct ieee80211_hw *hw;
3397         struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
3398         unsigned long flags;
3399         u16 pci_cmd;
3400
3401         /************************
3402          * 1. Allocating HW data
3403          ************************/
3404
3405         /* Disabling hardware scan means that mac80211 will perform scans
3406          * "the hard way", rather than using device's scan. */
3407         if (cfg->mod_params->disable_hw_scan) {
3408                 if (iwl_debug_level & IWL_DL_INFO)
3409                         dev_printk(KERN_DEBUG, &(pdev->dev),
3410                                    "Disabling hw_scan\n");
3411                 iwl_hw_ops.hw_scan = NULL;
3412         }
3413
3414         hw = iwl_alloc_all(cfg, &iwl_hw_ops);
3415         if (!hw) {
3416                 err = -ENOMEM;
3417                 goto out;
3418         }
3419         priv = hw->priv;
3420         /* At this point both hw and priv are allocated. */
3421
3422         SET_IEEE80211_DEV(hw, &pdev->dev);
3423
3424         IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3425         priv->cfg = cfg;
3426         priv->pci_dev = pdev;
3427         priv->inta_mask = CSR_INI_SET_MASK;
3428
3429 #ifdef CONFIG_IWLWIFI_DEBUG
3430         atomic_set(&priv->restrict_refcnt, 0);
3431 #endif
3432         if (iwl_alloc_traffic_mem(priv))
3433                 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3434
3435         /**************************
3436          * 2. Initializing PCI bus
3437          **************************/
3438         if (pci_enable_device(pdev)) {
3439                 err = -ENODEV;
3440                 goto out_ieee80211_free_hw;
3441         }
3442
3443         pci_set_master(pdev);
3444
3445         err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
3446         if (!err)
3447                 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
3448         if (err) {
3449                 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3450                 if (!err)
3451                         err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3452                 /* both attempts failed: */
3453                 if (err) {
3454                         IWL_WARN(priv, "No suitable DMA available.\n");
3455                         goto out_pci_disable_device;
3456                 }
3457         }
3458
3459         err = pci_request_regions(pdev, DRV_NAME);
3460         if (err)
3461                 goto out_pci_disable_device;
3462
3463         pci_set_drvdata(pdev, priv);
3464
3465
3466         /***********************
3467          * 3. Read REV register
3468          ***********************/
3469         priv->hw_base = pci_iomap(pdev, 0, 0);
3470         if (!priv->hw_base) {
3471                 err = -ENODEV;
3472                 goto out_pci_release_regions;
3473         }
3474
3475         IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
3476                 (unsigned long long) pci_resource_len(pdev, 0));
3477         IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
3478
3479         /* these spin locks will be used in apm_ops.init and EEPROM access
3480          * we should init now
3481          */
3482         spin_lock_init(&priv->reg_lock);
3483         spin_lock_init(&priv->lock);
3484
3485         /*
3486          * stop and reset the on-board processor just in case it is in a
3487          * strange state ... like being left stranded by a primary kernel
3488          * and this is now the kdump kernel trying to start up
3489          */
3490         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3491
3492         iwl_hw_detect(priv);
3493         IWL_INFO(priv, "Detected %s, REV=0x%X\n",
3494                 priv->cfg->name, priv->hw_rev);
3495
3496         /* We disable the RETRY_TIMEOUT register (0x41) to keep
3497          * PCI Tx retries from interfering with C3 CPU state */
3498         pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
3499
3500         iwl_prepare_card_hw(priv);
3501         if (!priv->hw_ready) {
3502                 IWL_WARN(priv, "Failed, HW not ready\n");
3503                 goto out_iounmap;
3504         }
3505
3506         /*****************
3507          * 4. Read EEPROM
3508          *****************/
3509         /* Read the EEPROM */
3510         err = iwl_eeprom_init(priv);
3511         if (err) {
3512                 IWL_ERR(priv, "Unable to init EEPROM\n");
3513                 goto out_iounmap;
3514         }
3515         err = iwl_eeprom_check_version(priv);
3516         if (err)
3517                 goto out_free_eeprom;
3518
3519         /* extract MAC Address */
3520         iwl_eeprom_get_mac(priv, priv->mac_addr);
3521         IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
3522         SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
3523
3524         /************************
3525          * 5. Setup HW constants
3526          ************************/
3527         if (iwl_set_hw_params(priv)) {
3528                 IWL_ERR(priv, "failed to set hw parameters\n");
3529                 goto out_free_eeprom;
3530         }
3531
3532         /*******************
3533          * 6. Setup priv
3534          *******************/
3535
3536         err = iwl_init_drv(priv);
3537         if (err)
3538                 goto out_free_eeprom;
3539         /* At this point both hw and priv are initialized. */
3540
3541         /********************
3542          * 7. Setup services
3543          ********************/
3544         spin_lock_irqsave(&priv->lock, flags);
3545         iwl_disable_interrupts(priv);
3546         spin_unlock_irqrestore(&priv->lock, flags);
3547
3548         pci_enable_msi(priv->pci_dev);
3549
3550         iwl_alloc_isr_ict(priv);
3551         err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
3552                           IRQF_SHARED, DRV_NAME, priv);
3553         if (err) {
3554                 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
3555                 goto out_disable_msi;
3556         }
3557         err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
3558         if (err) {
3559                 IWL_ERR(priv, "failed to create sysfs device attributes\n");
3560                 goto out_free_irq;
3561         }
3562
3563         iwl_setup_deferred_work(priv);
3564         iwl_setup_rx_handlers(priv);
3565
3566         /*********************************************
3567          * 8. Enable interrupts and read RFKILL state
3568          *********************************************/
3569
3570         /* enable interrupts if needed: hw bug w/a */
3571         pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
3572         if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
3573                 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
3574                 pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
3575         }
3576
3577         iwl_enable_interrupts(priv);
3578
3579         /* If platform's RF_KILL switch is NOT set to KILL */
3580         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3581                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3582         else
3583                 set_bit(STATUS_RF_KILL_HW, &priv->status);
3584
3585         wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3586                 test_bit(STATUS_RF_KILL_HW, &priv->status));
3587
3588         iwl_power_initialize(priv);
3589         iwl_tt_initialize(priv);
3590
3591         init_completion(&priv->_agn.firmware_loading_complete);
3592
3593         err = iwl_request_firmware(priv, true);
3594         if (err)
3595                 goto out_remove_sysfs;
3596
3597         return 0;
3598
3599  out_remove_sysfs:
3600         destroy_workqueue(priv->workqueue);
3601         priv->workqueue = NULL;
3602         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3603  out_free_irq:
3604         free_irq(priv->pci_dev->irq, priv);
3605         iwl_free_isr_ict(priv);
3606  out_disable_msi:
3607         pci_disable_msi(priv->pci_dev);
3608         iwl_uninit_drv(priv);
3609  out_free_eeprom:
3610         iwl_eeprom_free(priv);
3611  out_iounmap:
3612         pci_iounmap(pdev, priv->hw_base);
3613  out_pci_release_regions:
3614         pci_set_drvdata(pdev, NULL);
3615         pci_release_regions(pdev);
3616  out_pci_disable_device:
3617         pci_disable_device(pdev);
3618  out_ieee80211_free_hw:
3619         iwl_free_traffic_mem(priv);
3620         ieee80211_free_hw(priv->hw);
3621  out:
3622         return err;
3623 }
3624
3625 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
3626 {
3627         struct iwl_priv *priv = pci_get_drvdata(pdev);
3628         unsigned long flags;
3629
3630         if (!priv)
3631                 return;
3632
3633         wait_for_completion(&priv->_agn.firmware_loading_complete);
3634
3635         IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3636
3637         iwl_dbgfs_unregister(priv);
3638         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3639
3640         /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3641          * to be called and iwl_down since we are removing the device
3642          * we need to set STATUS_EXIT_PENDING bit.
3643          */
3644         set_bit(STATUS_EXIT_PENDING, &priv->status);
3645         if (priv->mac80211_registered) {
3646                 ieee80211_unregister_hw(priv->hw);
3647                 priv->mac80211_registered = 0;
3648         } else {
3649                 iwl_down(priv);
3650         }
3651
3652         /*
3653          * Make sure device is reset to low power before unloading driver.
3654          * This may be redundant with iwl_down(), but there are paths to
3655          * run iwl_down() without calling apm_ops.stop(), and there are
3656          * paths to avoid running iwl_down() at all before leaving driver.
3657          * This (inexpensive) call *makes sure* device is reset.
3658          */
3659         priv->cfg->ops->lib->apm_ops.stop(priv);
3660
3661         iwl_tt_exit(priv);
3662
3663         /* make sure we flush any pending irq or
3664          * tasklet for the driver
3665          */
3666         spin_lock_irqsave(&priv->lock, flags);
3667         iwl_disable_interrupts(priv);
3668         spin_unlock_irqrestore(&priv->lock, flags);
3669
3670         iwl_synchronize_irq(priv);
3671
3672         iwl_dealloc_ucode_pci(priv);
3673
3674         if (priv->rxq.bd)
3675                 iwlagn_rx_queue_free(priv, &priv->rxq);
3676         iwlagn_hw_txq_ctx_free(priv);
3677
3678         iwl_eeprom_free(priv);
3679
3680
3681         /*netif_stop_queue(dev); */
3682         flush_workqueue(priv->workqueue);
3683
3684         /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3685          * priv->workqueue... so we can't take down the workqueue
3686          * until now... */
3687         destroy_workqueue(priv->workqueue);
3688         priv->workqueue = NULL;
3689         iwl_free_traffic_mem(priv);
3690
3691         free_irq(priv->pci_dev->irq, priv);
3692         pci_disable_msi(priv->pci_dev);
3693         pci_iounmap(pdev, priv->hw_base);
3694         pci_release_regions(pdev);
3695         pci_disable_device(pdev);
3696         pci_set_drvdata(pdev, NULL);
3697
3698         iwl_uninit_drv(priv);
3699
3700         iwl_free_isr_ict(priv);
3701
3702         if (priv->ibss_beacon)
3703                 dev_kfree_skb(priv->ibss_beacon);
3704
3705         ieee80211_free_hw(priv->hw);
3706 }
3707
3708
3709 /*****************************************************************************
3710  *
3711  * driver and module entry point
3712  *
3713  *****************************************************************************/
3714
3715 /* Hardware specific file defines the PCI IDs table for that hardware module */
3716 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
3717 #ifdef CONFIG_IWL4965
3718         {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
3719         {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
3720 #endif /* CONFIG_IWL4965 */
3721 #ifdef CONFIG_IWL5000
3722 /* 5100 Series WiFi */
3723         {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
3724         {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
3725         {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
3726         {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
3727         {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
3728         {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
3729         {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
3730         {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
3731         {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
3732         {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
3733         {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
3734         {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
3735         {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
3736         {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
3737         {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
3738         {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
3739         {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
3740         {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
3741         {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
3742         {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
3743         {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
3744         {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
3745         {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
3746         {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
3747
3748 /* 5300 Series WiFi */
3749         {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
3750         {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
3751         {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
3752         {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
3753         {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
3754         {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
3755         {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
3756         {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
3757         {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
3758         {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
3759         {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
3760         {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
3761
3762 /* 5350 Series WiFi/WiMax */
3763         {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
3764         {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
3765         {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
3766
3767 /* 5150 Series Wifi/WiMax */
3768         {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
3769         {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
3770         {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
3771         {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
3772         {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
3773         {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
3774
3775         {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
3776         {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
3777         {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
3778         {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
3779
3780 /* 6x00 Series */
3781         {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
3782         {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
3783         {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
3784         {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
3785         {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
3786         {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
3787         {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
3788         {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
3789         {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
3790         {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
3791
3792 /* 6x00 Series Gen2 */
3793         {IWL_PCI_DEVICE(0x0082, 0x1201, iwl6000g2_2agn_cfg)},
3794         {IWL_PCI_DEVICE(0x0082, 0x1301, iwl6000g2_2agn_cfg)},
3795         {IWL_PCI_DEVICE(0x0082, 0x1321, iwl6000g2_2agn_cfg)},
3796         {IWL_PCI_DEVICE(0x0085, 0x1311, iwl6000g2_2agn_cfg)},
3797
3798 /* 6x50 WiFi/WiMax Series */
3799         {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
3800         {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
3801         {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
3802         {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
3803         {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
3804         {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
3805
3806 /* 1000 Series WiFi */
3807         {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
3808         {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
3809         {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
3810         {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
3811         {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
3812         {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
3813         {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
3814         {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
3815         {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
3816         {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
3817         {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
3818         {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
3819 #endif /* CONFIG_IWL5000 */
3820
3821         {0}
3822 };
3823 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
3824
3825 static struct pci_driver iwl_driver = {
3826         .name = DRV_NAME,
3827         .id_table = iwl_hw_card_ids,
3828         .probe = iwl_pci_probe,
3829         .remove = __devexit_p(iwl_pci_remove),
3830 #ifdef CONFIG_PM
3831         .suspend = iwl_pci_suspend,
3832         .resume = iwl_pci_resume,
3833 #endif
3834 };
3835
3836 static int __init iwl_init(void)
3837 {
3838
3839         int ret;
3840         printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
3841         printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
3842
3843         ret = iwlagn_rate_control_register();
3844         if (ret) {
3845                 printk(KERN_ERR DRV_NAME
3846                        "Unable to register rate control algorithm: %d\n", ret);
3847                 return ret;
3848         }
3849
3850         ret = pci_register_driver(&iwl_driver);
3851         if (ret) {
3852                 printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
3853                 goto error_register;
3854         }
3855
3856         return ret;
3857
3858 error_register:
3859         iwlagn_rate_control_unregister();
3860         return ret;
3861 }
3862
3863 static void __exit iwl_exit(void)
3864 {
3865         pci_unregister_driver(&iwl_driver);
3866         iwlagn_rate_control_unregister();
3867 }
3868
3869 module_exit(iwl_exit);
3870 module_init(iwl_init);
3871
3872 #ifdef CONFIG_IWLWIFI_DEBUG
3873 module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
3874 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
3875 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3876 MODULE_PARM_DESC(debug, "debug output mask");
3877 #endif
3878
3879 module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
3880 MODULE_PARM_DESC(swcrypto50,
3881                  "using crypto in software (default 0 [hardware]) (deprecated)");
3882 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
3883 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
3884 module_param_named(queues_num50,
3885                    iwlagn_mod_params.num_of_queues, int, S_IRUGO);
3886 MODULE_PARM_DESC(queues_num50,
3887                  "number of hw queues in 50xx series (deprecated)");
3888 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
3889 MODULE_PARM_DESC(queues_num, "number of hw queues.");
3890 module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
3891 MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
3892 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
3893 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
3894 module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
3895                    int, S_IRUGO);
3896 MODULE_PARM_DESC(amsdu_size_8K50,
3897                  "enable 8K amsdu size in 50XX series (deprecated)");
3898 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
3899                    int, S_IRUGO);
3900 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
3901 module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
3902 MODULE_PARM_DESC(fw_restart50,
3903                  "restart firmware in case of error (deprecated)");
3904 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
3905 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3906 module_param_named(
3907         disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
3908 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");