mac80211: pass vif and station to update_tkip_key

[safe/jmp/linux-2.6] / drivers / net / wireless / b43 / main.c

/*

  Broadcom B43 wireless driver

  Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
  Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
  Copyright (c) 2005-2009 Michael Buesch <mb@bu3sch.de>
  Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
  Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>

  SDIO support
  Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es>

  Some parts of the code in this file are derived from the ipw2200
  driver  Copyright(c) 2003 - 2004 Intel Corporation.

  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program; see the file COPYING.  If not, write to
  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  Boston, MA 02110-1301, USA.

*/

#include <linux/delay.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
#include <linux/skbuff.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <asm/unaligned.h>

#include "b43.h"
#include "main.h"
#include "debugfs.h"
#include "phy_common.h"
#include "phy_g.h"
#include "phy_n.h"
#include "dma.h"
#include "pio.h"
#include "sysfs.h"
#include "xmit.h"
#include "lo.h"
#include "pcmcia.h"
#include "sdio.h"
#include <linux/mmc/sdio_func.h>

MODULE_DESCRIPTION("Broadcom B43 wireless driver");
MODULE_AUTHOR("Martin Langer");
MODULE_AUTHOR("Stefano Brivio");
MODULE_AUTHOR("Michael Buesch");
MODULE_AUTHOR("Gábor Stefanik");
MODULE_LICENSE("GPL");

MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
MODULE_FIRMWARE("b43/ucode11.fw");
MODULE_FIRMWARE("b43/ucode13.fw");
MODULE_FIRMWARE("b43/ucode14.fw");
MODULE_FIRMWARE("b43/ucode15.fw");
MODULE_FIRMWARE("b43/ucode5.fw");
MODULE_FIRMWARE("b43/ucode9.fw");

static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
MODULE_PARM_DESC(bad_frames_preempt,
                 "enable(1) / disable(0) Bad Frames Preemption");

static char modparam_fwpostfix[16];
module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");

static int modparam_hwpctl;
module_param_named(hwpctl, modparam_hwpctl, int, 0444);
MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");

static int modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");

static int modparam_hwtkip;
module_param_named(hwtkip, modparam_hwtkip, int, 0444);
MODULE_PARM_DESC(hwtkip, "Enable hardware tkip.");

static int modparam_qos = 1;
module_param_named(qos, modparam_qos, int, 0444);
MODULE_PARM_DESC(qos, "Enable QOS support (default on)");

static int modparam_btcoex = 1;
module_param_named(btcoex, modparam_btcoex, int, 0444);
MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistence (default on)");

int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
module_param_named(verbose, b43_modparam_verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");

static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");

static const struct ssb_device_id b43_ssb_tbl[] = {
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 12),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15),
        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16),
        SSB_DEVTABLE_END
};

MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);

/* Channel and ratetables are shared for all devices.
 * They can't be const, because ieee80211 puts some precalculated
 * data in there. This data is the same for all devices, so we don't
 * get concurrency issues */
#define RATETAB_ENT(_rateid, _flags) \
        {                                                               \
                .bitrate        = B43_RATE_TO_BASE100KBPS(_rateid),     \
                .hw_value       = (_rateid),                            \
                .flags          = (_flags),                             \
        }

/*
 * NOTE: When changing this, sync with xmit.c's
 *       b43_plcp_get_bitrate_idx_* functions!
 */
static struct ieee80211_rate __b43_ratetable[] = {
        RATETAB_ENT(B43_CCK_RATE_1MB, 0),
        RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
        RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
        RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
        RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
        RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
};

#define b43_a_ratetable         (__b43_ratetable + 4)
#define b43_a_ratetable_size    8
#define b43_b_ratetable         (__b43_ratetable + 0)
#define b43_b_ratetable_size    4
#define b43_g_ratetable         (__b43_ratetable + 0)
#define b43_g_ratetable_size    12

#define CHAN4G(_channel, _freq, _flags) {                       \
        .band                   = IEEE80211_BAND_2GHZ,          \
        .center_freq            = (_freq),                      \
        .hw_value               = (_channel),                   \
        .flags                  = (_flags),                     \
        .max_antenna_gain       = 0,                            \
        .max_power              = 30,                           \
}
static struct ieee80211_channel b43_2ghz_chantable[] = {
        CHAN4G(1, 2412, 0),
        CHAN4G(2, 2417, 0),
        CHAN4G(3, 2422, 0),
        CHAN4G(4, 2427, 0),
        CHAN4G(5, 2432, 0),
        CHAN4G(6, 2437, 0),
        CHAN4G(7, 2442, 0),
        CHAN4G(8, 2447, 0),
        CHAN4G(9, 2452, 0),
        CHAN4G(10, 2457, 0),
        CHAN4G(11, 2462, 0),
        CHAN4G(12, 2467, 0),
        CHAN4G(13, 2472, 0),
        CHAN4G(14, 2484, 0),
};
#undef CHAN4G

#define CHAN5G(_channel, _flags) {                              \
        .band                   = IEEE80211_BAND_5GHZ,          \
        .center_freq            = 5000 + (5 * (_channel)),      \
        .hw_value               = (_channel),                   \
        .flags                  = (_flags),                     \
        .max_antenna_gain       = 0,                            \
        .max_power              = 30,                           \
}
static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
        CHAN5G(32, 0),          CHAN5G(34, 0),
        CHAN5G(36, 0),          CHAN5G(38, 0),
        CHAN5G(40, 0),          CHAN5G(42, 0),
        CHAN5G(44, 0),          CHAN5G(46, 0),
        CHAN5G(48, 0),          CHAN5G(50, 0),
        CHAN5G(52, 0),          CHAN5G(54, 0),
        CHAN5G(56, 0),          CHAN5G(58, 0),
        CHAN5G(60, 0),          CHAN5G(62, 0),
        CHAN5G(64, 0),          CHAN5G(66, 0),
        CHAN5G(68, 0),          CHAN5G(70, 0),
        CHAN5G(72, 0),          CHAN5G(74, 0),
        CHAN5G(76, 0),          CHAN5G(78, 0),
        CHAN5G(80, 0),          CHAN5G(82, 0),
        CHAN5G(84, 0),          CHAN5G(86, 0),
        CHAN5G(88, 0),          CHAN5G(90, 0),
        CHAN5G(92, 0),          CHAN5G(94, 0),
        CHAN5G(96, 0),          CHAN5G(98, 0),
        CHAN5G(100, 0),         CHAN5G(102, 0),
        CHAN5G(104, 0),         CHAN5G(106, 0),
        CHAN5G(108, 0),         CHAN5G(110, 0),
        CHAN5G(112, 0),         CHAN5G(114, 0),
        CHAN5G(116, 0),         CHAN5G(118, 0),
        CHAN5G(120, 0),         CHAN5G(122, 0),
        CHAN5G(124, 0),         CHAN5G(126, 0),
        CHAN5G(128, 0),         CHAN5G(130, 0),
        CHAN5G(132, 0),         CHAN5G(134, 0),
        CHAN5G(136, 0),         CHAN5G(138, 0),
        CHAN5G(140, 0),         CHAN5G(142, 0),
        CHAN5G(144, 0),         CHAN5G(145, 0),
        CHAN5G(146, 0),         CHAN5G(147, 0),
        CHAN5G(148, 0),         CHAN5G(149, 0),
        CHAN5G(150, 0),         CHAN5G(151, 0),
        CHAN5G(152, 0),         CHAN5G(153, 0),
        CHAN5G(154, 0),         CHAN5G(155, 0),
        CHAN5G(156, 0),         CHAN5G(157, 0),
        CHAN5G(158, 0),         CHAN5G(159, 0),
        CHAN5G(160, 0),         CHAN5G(161, 0),
        CHAN5G(162, 0),         CHAN5G(163, 0),
        CHAN5G(164, 0),         CHAN5G(165, 0),
        CHAN5G(166, 0),         CHAN5G(168, 0),
        CHAN5G(170, 0),         CHAN5G(172, 0),
        CHAN5G(174, 0),         CHAN5G(176, 0),
        CHAN5G(178, 0),         CHAN5G(180, 0),
        CHAN5G(182, 0),         CHAN5G(184, 0),
        CHAN5G(186, 0),         CHAN5G(188, 0),
        CHAN5G(190, 0),         CHAN5G(192, 0),
        CHAN5G(194, 0),         CHAN5G(196, 0),
        CHAN5G(198, 0),         CHAN5G(200, 0),
        CHAN5G(202, 0),         CHAN5G(204, 0),
        CHAN5G(206, 0),         CHAN5G(208, 0),
        CHAN5G(210, 0),         CHAN5G(212, 0),
        CHAN5G(214, 0),         CHAN5G(216, 0),
        CHAN5G(218, 0),         CHAN5G(220, 0),
        CHAN5G(222, 0),         CHAN5G(224, 0),
        CHAN5G(226, 0),         CHAN5G(228, 0),
};

static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
        CHAN5G(34, 0),          CHAN5G(36, 0),
        CHAN5G(38, 0),          CHAN5G(40, 0),
        CHAN5G(42, 0),          CHAN5G(44, 0),
        CHAN5G(46, 0),          CHAN5G(48, 0),
        CHAN5G(52, 0),          CHAN5G(56, 0),
        CHAN5G(60, 0),          CHAN5G(64, 0),
        CHAN5G(100, 0),         CHAN5G(104, 0),
        CHAN5G(108, 0),         CHAN5G(112, 0),
        CHAN5G(116, 0),         CHAN5G(120, 0),
        CHAN5G(124, 0),         CHAN5G(128, 0),
        CHAN5G(132, 0),         CHAN5G(136, 0),
        CHAN5G(140, 0),         CHAN5G(149, 0),
        CHAN5G(153, 0),         CHAN5G(157, 0),
        CHAN5G(161, 0),         CHAN5G(165, 0),
        CHAN5G(184, 0),         CHAN5G(188, 0),
        CHAN5G(192, 0),         CHAN5G(196, 0),
        CHAN5G(200, 0),         CHAN5G(204, 0),
        CHAN5G(208, 0),         CHAN5G(212, 0),
        CHAN5G(216, 0),
};
#undef CHAN5G

static struct ieee80211_supported_band b43_band_5GHz_nphy = {
        .band           = IEEE80211_BAND_5GHZ,
        .channels       = b43_5ghz_nphy_chantable,
        .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable),
        .bitrates       = b43_a_ratetable,
        .n_bitrates     = b43_a_ratetable_size,
};

static struct ieee80211_supported_band b43_band_5GHz_aphy = {
        .band           = IEEE80211_BAND_5GHZ,
        .channels       = b43_5ghz_aphy_chantable,
        .n_channels     = ARRAY_SIZE(b43_5ghz_aphy_chantable),
        .bitrates       = b43_a_ratetable,
        .n_bitrates     = b43_a_ratetable_size,
};

static struct ieee80211_supported_band b43_band_2GHz = {
        .band           = IEEE80211_BAND_2GHZ,
        .channels       = b43_2ghz_chantable,
        .n_channels     = ARRAY_SIZE(b43_2ghz_chantable),
        .bitrates       = b43_g_ratetable,
        .n_bitrates     = b43_g_ratetable_size,
};

static void b43_wireless_core_exit(struct b43_wldev *dev);
static int b43_wireless_core_init(struct b43_wldev *dev);
static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
static int b43_wireless_core_start(struct b43_wldev *dev);

static int b43_ratelimit(struct b43_wl *wl)
{
        if (!wl || !wl->current_dev)
                return 1;
        if (b43_status(wl->current_dev) < B43_STAT_STARTED)
                return 1;
        /* We are up and running.
         * Ratelimit the messages to avoid DoS over the net. */
        return net_ratelimit();
}

void b43info(struct b43_wl *wl, const char *fmt, ...)
{
        va_list args;

        if (b43_modparam_verbose < B43_VERBOSITY_INFO)
                return;
        if (!b43_ratelimit(wl))
                return;
        va_start(args, fmt);
        printk(KERN_INFO "b43-%s: ",
               (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
        vprintk(fmt, args);
        va_end(args);
}

void b43err(struct b43_wl *wl, const char *fmt, ...)
{
        va_list args;

        if (b43_modparam_verbose < B43_VERBOSITY_ERROR)
                return;
        if (!b43_ratelimit(wl))
                return;
        va_start(args, fmt);
        printk(KERN_ERR "b43-%s ERROR: ",
               (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
        vprintk(fmt, args);
        va_end(args);
}

void b43warn(struct b43_wl *wl, const char *fmt, ...)
{
        va_list args;

        if (b43_modparam_verbose < B43_VERBOSITY_WARN)
                return;
        if (!b43_ratelimit(wl))
                return;
        va_start(args, fmt);
        printk(KERN_WARNING "b43-%s warning: ",
               (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
        vprintk(fmt, args);
        va_end(args);
}

void b43dbg(struct b43_wl *wl, const char *fmt, ...)
{
        va_list args;

        if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
                return;
        va_start(args, fmt);
        printk(KERN_DEBUG "b43-%s debug: ",
               (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
        vprintk(fmt, args);
        va_end(args);
}

static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
{
        u32 macctl;

        B43_WARN_ON(offset % 4 != 0);

        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        if (macctl & B43_MACCTL_BE)
                val = swab32(val);

        b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
        mmiowb();
        b43_write32(dev, B43_MMIO_RAM_DATA, val);
}

static inline void b43_shm_control_word(struct b43_wldev *dev,
                                        u16 routing, u16 offset)
{
        u32 control;

        /* "offset" is the WORD offset. */
        control = routing;
        control <<= 16;
        control |= offset;
        b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
}

u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
{
        u32 ret;

        if (routing == B43_SHM_SHARED) {
                B43_WARN_ON(offset & 0x0001);
                if (offset & 0x0003) {
                        /* Unaligned access */
                        b43_shm_control_word(dev, routing, offset >> 2);
                        ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
                        b43_shm_control_word(dev, routing, (offset >> 2) + 1);
                        ret |= ((u32)b43_read16(dev, B43_MMIO_SHM_DATA)) << 16;

                        goto out;
                }
                offset >>= 2;
        }
        b43_shm_control_word(dev, routing, offset);
        ret = b43_read32(dev, B43_MMIO_SHM_DATA);
out:
        return ret;
}

u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
{
        u16 ret;

        if (routing == B43_SHM_SHARED) {
                B43_WARN_ON(offset & 0x0001);
                if (offset & 0x0003) {
                        /* Unaligned access */
                        b43_shm_control_word(dev, routing, offset >> 2);
                        ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);

                        goto out;
                }
                offset >>= 2;
        }
        b43_shm_control_word(dev, routing, offset);
        ret = b43_read16(dev, B43_MMIO_SHM_DATA);
out:
        return ret;
}

void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
{
        if (routing == B43_SHM_SHARED) {
                B43_WARN_ON(offset & 0x0001);
                if (offset & 0x0003) {
                        /* Unaligned access */
                        b43_shm_control_word(dev, routing, offset >> 2);
                        b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
                                    value & 0xFFFF);
                        b43_shm_control_word(dev, routing, (offset >> 2) + 1);
                        b43_write16(dev, B43_MMIO_SHM_DATA,
                                    (value >> 16) & 0xFFFF);
                        return;
                }
                offset >>= 2;
        }
        b43_shm_control_word(dev, routing, offset);
        b43_write32(dev, B43_MMIO_SHM_DATA, value);
}

void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
{
        if (routing == B43_SHM_SHARED) {
                B43_WARN_ON(offset & 0x0001);
                if (offset & 0x0003) {
                        /* Unaligned access */
                        b43_shm_control_word(dev, routing, offset >> 2);
                        b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
                        return;
                }
                offset >>= 2;
        }
        b43_shm_control_word(dev, routing, offset);
        b43_write16(dev, B43_MMIO_SHM_DATA, value);
}

/* Read HostFlags */
u64 b43_hf_read(struct b43_wldev *dev)
{
        u64 ret;

        ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
        ret <<= 16;
        ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI);
        ret <<= 16;
        ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);

        return ret;
}

/* Write HostFlags */
void b43_hf_write(struct b43_wldev *dev, u64 value)
{
        u16 lo, mi, hi;

        lo = (value & 0x00000000FFFFULL);
        mi = (value & 0x0000FFFF0000ULL) >> 16;
        hi = (value & 0xFFFF00000000ULL) >> 32;
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo);
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi);
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
}

/* Read the firmware capabilities bitmask (Opensource firmware only) */
static u16 b43_fwcapa_read(struct b43_wldev *dev)
{
        B43_WARN_ON(!dev->fw.opensource);
        return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
}

void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
{
        u32 low, high;

        B43_WARN_ON(dev->dev->id.revision < 3);

        /* The hardware guarantees us an atomic read, if we
         * read the low register first. */
        low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
        high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);

        *tsf = high;
        *tsf <<= 32;
        *tsf |= low;
}

static void b43_time_lock(struct b43_wldev *dev)
{
        u32 macctl;

        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        macctl |= B43_MACCTL_TBTTHOLD;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);
        /* Commit the write */
        b43_read32(dev, B43_MMIO_MACCTL);
}

static void b43_time_unlock(struct b43_wldev *dev)
{
        u32 macctl;

        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        macctl &= ~B43_MACCTL_TBTTHOLD;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);
        /* Commit the write */
        b43_read32(dev, B43_MMIO_MACCTL);
}

static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
{
        u32 low, high;

        B43_WARN_ON(dev->dev->id.revision < 3);

        low = tsf;
        high = (tsf >> 32);
        /* The hardware guarantees us an atomic write, if we
         * write the low register first. */
        b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low);
        mmiowb();
        b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high);
        mmiowb();
}

void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
{
        b43_time_lock(dev);
        b43_tsf_write_locked(dev, tsf);
        b43_time_unlock(dev);
}

static
void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac)
{
        static const u8 zero_addr[ETH_ALEN] = { 0 };
        u16 data;

        if (!mac)
                mac = zero_addr;

        offset |= 0x0020;
        b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);

        data = mac[0];
        data |= mac[1] << 8;
        b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
        data = mac[2];
        data |= mac[3] << 8;
        b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
        data = mac[4];
        data |= mac[5] << 8;
        b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
}

static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
{
        const u8 *mac;
        const u8 *bssid;
        u8 mac_bssid[ETH_ALEN * 2];
        int i;
        u32 tmp;

        bssid = dev->wl->bssid;
        mac = dev->wl->mac_addr;

        b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);

        memcpy(mac_bssid, mac, ETH_ALEN);
        memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);

        /* Write our MAC address and BSSID to template ram */
        for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
                tmp = (u32) (mac_bssid[i + 0]);
                tmp |= (u32) (mac_bssid[i + 1]) << 8;
                tmp |= (u32) (mac_bssid[i + 2]) << 16;
                tmp |= (u32) (mac_bssid[i + 3]) << 24;
                b43_ram_write(dev, 0x20 + i, tmp);
        }
}

static void b43_upload_card_macaddress(struct b43_wldev *dev)
{
        b43_write_mac_bssid_templates(dev);
        b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
}

static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
{
        /* slot_time is in usec. */
        if (dev->phy.type != B43_PHYTYPE_G)
                return;
        b43_write16(dev, 0x684, 510 + slot_time);
        b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
}

static void b43_short_slot_timing_enable(struct b43_wldev *dev)
{
        b43_set_slot_time(dev, 9);
}

static void b43_short_slot_timing_disable(struct b43_wldev *dev)
{
        b43_set_slot_time(dev, 20);
}

/* DummyTransmission function, as documented on
 * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission
 */
void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
{
        struct b43_phy *phy = &dev->phy;
        unsigned int i, max_loop;
        u16 value;
        u32 buffer[5] = {
                0x00000000,
                0x00D40000,
                0x00000000,
                0x01000000,
                0x00000000,
        };

        if (ofdm) {
                max_loop = 0x1E;
                buffer[0] = 0x000201CC;
        } else {
                max_loop = 0xFA;
                buffer[0] = 0x000B846E;
        }

        for (i = 0; i < 5; i++)
                b43_ram_write(dev, i * 4, buffer[i]);

        b43_write16(dev, 0x0568, 0x0000);
        if (dev->dev->id.revision < 11)
                b43_write16(dev, 0x07C0, 0x0000);
        else
                b43_write16(dev, 0x07C0, 0x0100);
        value = (ofdm ? 0x41 : 0x40);
        b43_write16(dev, 0x050C, value);
        if ((phy->type == B43_PHYTYPE_N) || (phy->type == B43_PHYTYPE_LP))
                b43_write16(dev, 0x0514, 0x1A02);
        b43_write16(dev, 0x0508, 0x0000);
        b43_write16(dev, 0x050A, 0x0000);
        b43_write16(dev, 0x054C, 0x0000);
        b43_write16(dev, 0x056A, 0x0014);
        b43_write16(dev, 0x0568, 0x0826);
        b43_write16(dev, 0x0500, 0x0000);
        if (!pa_on && (phy->type == B43_PHYTYPE_N)) {
                //SPEC TODO
        }

        switch (phy->type) {
        case B43_PHYTYPE_N:
                b43_write16(dev, 0x0502, 0x00D0);
                break;
        case B43_PHYTYPE_LP:
                b43_write16(dev, 0x0502, 0x0050);
                break;
        default:
                b43_write16(dev, 0x0502, 0x0030);
        }

        if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
                b43_radio_write16(dev, 0x0051, 0x0017);
        for (i = 0x00; i < max_loop; i++) {
                value = b43_read16(dev, 0x050E);
                if (value & 0x0080)
                        break;
                udelay(10);
        }
        for (i = 0x00; i < 0x0A; i++) {
                value = b43_read16(dev, 0x050E);
                if (value & 0x0400)
                        break;
                udelay(10);
        }
        for (i = 0x00; i < 0x19; i++) {
                value = b43_read16(dev, 0x0690);
                if (!(value & 0x0100))
                        break;
                udelay(10);
        }
        if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
                b43_radio_write16(dev, 0x0051, 0x0037);
}

static void key_write(struct b43_wldev *dev,
                      u8 index, u8 algorithm, const u8 *key)
{
        unsigned int i;
        u32 offset;
        u16 value;
        u16 kidx;

        /* Key index/algo block */
        kidx = b43_kidx_to_fw(dev, index);
        value = ((kidx << 4) | algorithm);
        b43_shm_write16(dev, B43_SHM_SHARED,
                        B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);

        /* Write the key to the Key Table Pointer offset */
        offset = dev->ktp + (index * B43_SEC_KEYSIZE);
        for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
                value = key[i];
                value |= (u16) (key[i + 1]) << 8;
                b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
        }
}

static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr)
{
        u32 addrtmp[2] = { 0, 0, };
        u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;

        if (b43_new_kidx_api(dev))
                pairwise_keys_start = B43_NR_GROUP_KEYS;

        B43_WARN_ON(index < pairwise_keys_start);
        /* We have four default TX keys and possibly four default RX keys.
         * Physical mac 0 is mapped to physical key 4 or 8, depending
         * on the firmware version.
         * So we must adjust the index here.
         */
        index -= pairwise_keys_start;
        B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);

        if (addr) {
                addrtmp[0] = addr[0];
                addrtmp[0] |= ((u32) (addr[1]) << 8);
                addrtmp[0] |= ((u32) (addr[2]) << 16);
                addrtmp[0] |= ((u32) (addr[3]) << 24);
                addrtmp[1] = addr[4];
                addrtmp[1] |= ((u32) (addr[5]) << 8);
        }

        /* Receive match transmitter address (RCMTA) mechanism */
        b43_shm_write32(dev, B43_SHM_RCMTA,
                        (index * 2) + 0, addrtmp[0]);
        b43_shm_write16(dev, B43_SHM_RCMTA,
                        (index * 2) + 1, addrtmp[1]);
}

/* The ucode will use phase1 key with TEK key to decrypt rx packets.
 * When a packet is received, the iv32 is checked.
 * - if it doesn't the packet is returned without modification (and software
 *   decryption can be done). That's what happen when iv16 wrap.
 * - if it does, the rc4 key is computed, and decryption is tried.
 *   Either it will success and B43_RX_MAC_DEC is returned,
 *   either it fails and B43_RX_MAC_DEC|B43_RX_MAC_DECERR is returned
 *   and the packet is not usable (it got modified by the ucode).
 * So in order to never have B43_RX_MAC_DECERR, we should provide
 * a iv32 and phase1key that match. Because we drop packets in case of
 * B43_RX_MAC_DECERR, if we have a correct iv32 but a wrong phase1key, all
 * packets will be lost without higher layer knowing (ie no resync possible
 * until next wrap).
 *
 * NOTE : this should support 50 key like RCMTA because
 * (B43_SHM_SH_KEYIDXBLOCK - B43_SHM_SH_TKIPTSCTTAK)/14 = 50
 */
static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
                u16 *phase1key)
{
        unsigned int i;
        u32 offset;
        u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;

        if (!modparam_hwtkip)
                return;

        if (b43_new_kidx_api(dev))
                pairwise_keys_start = B43_NR_GROUP_KEYS;

        B43_WARN_ON(index < pairwise_keys_start);
        /* We have four default TX keys and possibly four default RX keys.
         * Physical mac 0 is mapped to physical key 4 or 8, depending
         * on the firmware version.
         * So we must adjust the index here.
         */
        index -= pairwise_keys_start;
        B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);

        if (b43_debug(dev, B43_DBG_KEYS)) {
                b43dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n",
                                index, iv32);
        }
        /* Write the key to the  RX tkip shared mem */
        offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4);
        for (i = 0; i < 10; i += 2) {
                b43_shm_write16(dev, B43_SHM_SHARED, offset + i,
                                phase1key ? phase1key[i / 2] : 0);
        }
        b43_shm_write16(dev, B43_SHM_SHARED, offset + i, iv32);
        b43_shm_write16(dev, B43_SHM_SHARED, offset + i + 2, iv32 >> 16);
}

static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
                                   struct ieee80211_vif *vif,
                                   struct ieee80211_key_conf *keyconf,
                                   struct ieee80211_sta *sta,
                                   u32 iv32, u16 *phase1key)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        int index = keyconf->hw_key_idx;

        if (B43_WARN_ON(!modparam_hwtkip))
                return;

        mutex_lock(&wl->mutex);

        dev = wl->current_dev;
        if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
                goto out_unlock;

        keymac_write(dev, index, NULL); /* First zero out mac to avoid race */

        rx_tkip_phase1_write(dev, index, iv32, phase1key);
        /* only pairwise TKIP keys are supported right now */
        if (WARN_ON(!sta))
                goto out_unlock;
        keymac_write(dev, index, sta->addr);

out_unlock:
        mutex_unlock(&wl->mutex);
}

static void do_key_write(struct b43_wldev *dev,
                         u8 index, u8 algorithm,
                         const u8 *key, size_t key_len, const u8 *mac_addr)
{
        u8 buf[B43_SEC_KEYSIZE] = { 0, };
        u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;

        if (b43_new_kidx_api(dev))
                pairwise_keys_start = B43_NR_GROUP_KEYS;

        B43_WARN_ON(index >= ARRAY_SIZE(dev->key));
        B43_WARN_ON(key_len > B43_SEC_KEYSIZE);

        if (index >= pairwise_keys_start)
                keymac_write(dev, index, NULL); /* First zero out mac. */
        if (algorithm == B43_SEC_ALGO_TKIP) {
                /*
                 * We should provide an initial iv32, phase1key pair.
                 * We could start with iv32=0 and compute the corresponding
                 * phase1key, but this means calling ieee80211_get_tkip_key
                 * with a fake skb (or export other tkip function).
                 * Because we are lazy we hope iv32 won't start with
                 * 0xffffffff and let's b43_op_update_tkip_key provide a
                 * correct pair.
                 */
                rx_tkip_phase1_write(dev, index, 0xffffffff, (u16*)buf);
        } else if (index >= pairwise_keys_start) /* clear it */
                rx_tkip_phase1_write(dev, index, 0, NULL);
        if (key)
                memcpy(buf, key, key_len);
        key_write(dev, index, algorithm, buf);
        if (index >= pairwise_keys_start)
                keymac_write(dev, index, mac_addr);

        dev->key[index].algorithm = algorithm;
}

static int b43_key_write(struct b43_wldev *dev,
                         int index, u8 algorithm,
                         const u8 *key, size_t key_len,
                         const u8 *mac_addr,
                         struct ieee80211_key_conf *keyconf)
{
        int i;
        int pairwise_keys_start;

        /* For ALG_TKIP the key is encoded as a 256-bit (32 byte) data block:
         *      - Temporal Encryption Key (128 bits)
         *      - Temporal Authenticator Tx MIC Key (64 bits)
         *      - Temporal Authenticator Rx MIC Key (64 bits)
         *
         *      Hardware only store TEK
         */
        if (algorithm == B43_SEC_ALGO_TKIP && key_len == 32)
                key_len = 16;
        if (key_len > B43_SEC_KEYSIZE)
                return -EINVAL;
        for (i = 0; i < ARRAY_SIZE(dev->key); i++) {
                /* Check that we don't already have this key. */
                B43_WARN_ON(dev->key[i].keyconf == keyconf);
        }
        if (index < 0) {
                /* Pairwise key. Get an empty slot for the key. */
                if (b43_new_kidx_api(dev))
                        pairwise_keys_start = B43_NR_GROUP_KEYS;
                else
                        pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
                for (i = pairwise_keys_start;
                     i < pairwise_keys_start + B43_NR_PAIRWISE_KEYS;
                     i++) {
                        B43_WARN_ON(i >= ARRAY_SIZE(dev->key));
                        if (!dev->key[i].keyconf) {
                                /* found empty */
                                index = i;
                                break;
                        }
                }
                if (index < 0) {
                        b43warn(dev->wl, "Out of hardware key memory\n");
                        return -ENOSPC;
                }
        } else
                B43_WARN_ON(index > 3);

        do_key_write(dev, index, algorithm, key, key_len, mac_addr);
        if ((index <= 3) && !b43_new_kidx_api(dev)) {
                /* Default RX key */
                B43_WARN_ON(mac_addr);
                do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
        }
        keyconf->hw_key_idx = index;
        dev->key[index].keyconf = keyconf;

        return 0;
}

static int b43_key_clear(struct b43_wldev *dev, int index)
{
        if (B43_WARN_ON((index < 0) || (index >= ARRAY_SIZE(dev->key))))
                return -EINVAL;
        do_key_write(dev, index, B43_SEC_ALGO_NONE,
                     NULL, B43_SEC_KEYSIZE, NULL);
        if ((index <= 3) && !b43_new_kidx_api(dev)) {
                do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
                             NULL, B43_SEC_KEYSIZE, NULL);
        }
        dev->key[index].keyconf = NULL;

        return 0;
}

static void b43_clear_keys(struct b43_wldev *dev)
{
        int i, count;

        if (b43_new_kidx_api(dev))
                count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
        else
                count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
        for (i = 0; i < count; i++)
                b43_key_clear(dev, i);
}

static void b43_dump_keymemory(struct b43_wldev *dev)
{
        unsigned int i, index, count, offset, pairwise_keys_start;
        u8 mac[ETH_ALEN];
        u16 algo;
        u32 rcmta0;
        u16 rcmta1;
        u64 hf;
        struct b43_key *key;

        if (!b43_debug(dev, B43_DBG_KEYS))
                return;

        hf = b43_hf_read(dev);
        b43dbg(dev->wl, "Hardware key memory dump:  USEDEFKEYS=%u\n",
               !!(hf & B43_HF_USEDEFKEYS));
        if (b43_new_kidx_api(dev)) {
                pairwise_keys_start = B43_NR_GROUP_KEYS;
                count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
        } else {
                pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
                count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
        }
        for (index = 0; index < count; index++) {
                key = &(dev->key[index]);
                printk(KERN_DEBUG "Key slot %02u: %s",
                       index, (key->keyconf == NULL) ? " " : "*");
                offset = dev->ktp + (index * B43_SEC_KEYSIZE);
                for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
                        u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
                        printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
                }

                algo = b43_shm_read16(dev, B43_SHM_SHARED,
                                      B43_SHM_SH_KEYIDXBLOCK + (index * 2));
                printk("   Algo: %04X/%02X", algo, key->algorithm);

                if (index >= pairwise_keys_start) {
                        if (key->algorithm == B43_SEC_ALGO_TKIP) {
                                printk("   TKIP: ");
                                offset = B43_SHM_SH_TKIPTSCTTAK + (index - 4) * (10 + 4);
                                for (i = 0; i < 14; i += 2) {
                                        u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
                                        printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
                                }
                        }
                        rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA,
                                                ((index - pairwise_keys_start) * 2) + 0);
                        rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA,
                                                ((index - pairwise_keys_start) * 2) + 1);
                        *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0);
                        *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1);
                        printk("   MAC: %pM", mac);
                } else
                        printk("   DEFAULT KEY");
                printk("\n");
        }
}

void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
{
        u32 macctl;
        u16 ucstat;
        bool hwps;
        bool awake;
        int i;

        B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
                    (ps_flags & B43_PS_DISABLED));
        B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));

        if (ps_flags & B43_PS_ENABLED) {
                hwps = 1;
        } else if (ps_flags & B43_PS_DISABLED) {
                hwps = 0;
        } else {
                //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
                //      and thus is not an AP and we are associated, set bit 25
        }
        if (ps_flags & B43_PS_AWAKE) {
                awake = 1;
        } else if (ps_flags & B43_PS_ASLEEP) {
                awake = 0;
        } else {
                //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
                //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
                //      successful, set bit26
        }

/* FIXME: For now we force awake-on and hwps-off */
        hwps = 0;
        awake = 1;

        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        if (hwps)
                macctl |= B43_MACCTL_HWPS;
        else
                macctl &= ~B43_MACCTL_HWPS;
        if (awake)
                macctl |= B43_MACCTL_AWAKE;
        else
                macctl &= ~B43_MACCTL_AWAKE;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);
        /* Commit write */
        b43_read32(dev, B43_MMIO_MACCTL);
        if (awake && dev->dev->id.revision >= 5) {
                /* Wait for the microcode to wake up. */
                for (i = 0; i < 100; i++) {
                        ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
                                                B43_SHM_SH_UCODESTAT);
                        if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
                                break;
                        udelay(10);
                }
        }
}

void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
{
        u32 tmslow;
        u32 macctl;

        flags |= B43_TMSLOW_PHYCLKEN;
        flags |= B43_TMSLOW_PHYRESET;
        ssb_device_enable(dev->dev, flags);
        msleep(2);              /* Wait for the PLL to turn on. */

        /* Now take the PHY out of Reset again */
        tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
        tmslow |= SSB_TMSLOW_FGC;
        tmslow &= ~B43_TMSLOW_PHYRESET;
        ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
        ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
        msleep(1);
        tmslow &= ~SSB_TMSLOW_FGC;
        ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
        ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
        msleep(1);

        /* Turn Analog ON, but only if we already know the PHY-type.
         * This protects against very early setup where we don't know the
         * PHY-type, yet. wireless_core_reset will be called once again later,
         * when we know the PHY-type. */
        if (dev->phy.ops)
                dev->phy.ops->switch_analog(dev, 1);

        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        macctl &= ~B43_MACCTL_GMODE;
        if (flags & B43_TMSLOW_GMODE)
                macctl |= B43_MACCTL_GMODE;
        macctl |= B43_MACCTL_IHR_ENABLED;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);
}

static void handle_irq_transmit_status(struct b43_wldev *dev)
{
        u32 v0, v1;
        u16 tmp;
        struct b43_txstatus stat;

        while (1) {
                v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
                if (!(v0 & 0x00000001))
                        break;
                v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);

                stat.cookie = (v0 >> 16);
                stat.seq = (v1 & 0x0000FFFF);
                stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
                tmp = (v0 & 0x0000FFFF);
                stat.frame_count = ((tmp & 0xF000) >> 12);
                stat.rts_count = ((tmp & 0x0F00) >> 8);
                stat.supp_reason = ((tmp & 0x001C) >> 2);
                stat.pm_indicated = !!(tmp & 0x0080);
                stat.intermediate = !!(tmp & 0x0040);
                stat.for_ampdu = !!(tmp & 0x0020);
                stat.acked = !!(tmp & 0x0002);

                b43_handle_txstatus(dev, &stat);
        }
}

static void drain_txstatus_queue(struct b43_wldev *dev)
{
        u32 dummy;

        if (dev->dev->id.revision < 5)
                return;
        /* Read all entries from the microcode TXstatus FIFO
         * and throw them away.
         */
        while (1) {
                dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
                if (!(dummy & 0x00000001))
                        break;
                dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
        }
}

static u32 b43_jssi_read(struct b43_wldev *dev)
{
        u32 val = 0;

        val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
        val <<= 16;
        val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);

        return val;
}

static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
{
        b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
        b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
}

static void b43_generate_noise_sample(struct b43_wldev *dev)
{
        b43_jssi_write(dev, 0x7F7F7F7F);
        b43_write32(dev, B43_MMIO_MACCMD,
                    b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
}

static void b43_calculate_link_quality(struct b43_wldev *dev)
{
        /* Top half of Link Quality calculation. */

        if (dev->phy.type != B43_PHYTYPE_G)
                return;
        if (dev->noisecalc.calculation_running)
                return;
        dev->noisecalc.calculation_running = 1;
        dev->noisecalc.nr_samples = 0;

        b43_generate_noise_sample(dev);
}

static void handle_irq_noise(struct b43_wldev *dev)
{
        struct b43_phy_g *phy = dev->phy.g;
        u16 tmp;
        u8 noise[4];
        u8 i, j;
        s32 average;

        /* Bottom half of Link Quality calculation. */

        if (dev->phy.type != B43_PHYTYPE_G)
                return;

        /* Possible race condition: It might be possible that the user
         * changed to a different channel in the meantime since we
         * started the calculation. We ignore that fact, since it's
         * not really that much of a problem. The background noise is
         * an estimation only anyway. Slightly wrong results will get damped
         * by the averaging of the 8 sample rounds. Additionally the
         * value is shortlived. So it will be replaced by the next noise
         * calculation round soon. */

        B43_WARN_ON(!dev->noisecalc.calculation_running);
        *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
        if (noise[0] == 0x7F || noise[1] == 0x7F ||
            noise[2] == 0x7F || noise[3] == 0x7F)
                goto generate_new;

        /* Get the noise samples. */
        B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
        i = dev->noisecalc.nr_samples;
        noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
        noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
        noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
        noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
        dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
        dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
        dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
        dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
        dev->noisecalc.nr_samples++;
        if (dev->noisecalc.nr_samples == 8) {
                /* Calculate the Link Quality by the noise samples. */
                average = 0;
                for (i = 0; i < 8; i++) {
                        for (j = 0; j < 4; j++)
                                average += dev->noisecalc.samples[i][j];
                }
                average /= (8 * 4);
                average *= 125;
                average += 64;
                average /= 128;
                tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
                tmp = (tmp / 128) & 0x1F;
                if (tmp >= 8)
                        average += 2;
                else
                        average -= 25;
                if (tmp == 8)
                        average -= 72;
                else
                        average -= 48;

                dev->stats.link_noise = average;
                dev->noisecalc.calculation_running = 0;
                return;
        }
generate_new:
        b43_generate_noise_sample(dev);
}

static void handle_irq_tbtt_indication(struct b43_wldev *dev)
{
        if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
                ///TODO: PS TBTT
        } else {
                if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
                        b43_power_saving_ctl_bits(dev, 0);
        }
        if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
                dev->dfq_valid = 1;
}

static void handle_irq_atim_end(struct b43_wldev *dev)
{
        if (dev->dfq_valid) {
                b43_write32(dev, B43_MMIO_MACCMD,
                            b43_read32(dev, B43_MMIO_MACCMD)
                            | B43_MACCMD_DFQ_VALID);
                dev->dfq_valid = 0;
        }
}

static void handle_irq_pmq(struct b43_wldev *dev)
{
        u32 tmp;

        //TODO: AP mode.

        while (1) {
                tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
                if (!(tmp & 0x00000008))
                        break;
        }
        /* 16bit write is odd, but correct. */
        b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
}

static void b43_write_template_common(struct b43_wldev *dev,
                                      const u8 *data, u16 size,
                                      u16 ram_offset,
                                      u16 shm_size_offset, u8 rate)
{
        u32 i, tmp;
        struct b43_plcp_hdr4 plcp;

        plcp.data = 0;
        b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
        b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
        ram_offset += sizeof(u32);
        /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
         * So leave the first two bytes of the next write blank.
         */
        tmp = (u32) (data[0]) << 16;
        tmp |= (u32) (data[1]) << 24;
        b43_ram_write(dev, ram_offset, tmp);
        ram_offset += sizeof(u32);
        for (i = 2; i < size; i += sizeof(u32)) {
                tmp = (u32) (data[i + 0]);
                if (i + 1 < size)
                        tmp |= (u32) (data[i + 1]) << 8;
                if (i + 2 < size)
                        tmp |= (u32) (data[i + 2]) << 16;
                if (i + 3 < size)
                        tmp |= (u32) (data[i + 3]) << 24;
                b43_ram_write(dev, ram_offset + i - 2, tmp);
        }
        b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
                        size + sizeof(struct b43_plcp_hdr6));
}

/* Check if the use of the antenna that ieee80211 told us to
 * use is possible. This will fall back to DEFAULT.
 * "antenna_nr" is the antenna identifier we got from ieee80211. */
u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
                                  u8 antenna_nr)
{
        u8 antenna_mask;

        if (antenna_nr == 0) {
                /* Zero means "use default antenna". That's always OK. */
                return 0;
        }

        /* Get the mask of available antennas. */
        if (dev->phy.gmode)
                antenna_mask = dev->dev->bus->sprom.ant_available_bg;
        else
                antenna_mask = dev->dev->bus->sprom.ant_available_a;

        if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
                /* This antenna is not available. Fall back to default. */
                return 0;
        }

        return antenna_nr;
}

/* Convert a b43 antenna number value to the PHY TX control value. */
static u16 b43_antenna_to_phyctl(int antenna)
{
        switch (antenna) {
        case B43_ANTENNA0:
                return B43_TXH_PHY_ANT0;
        case B43_ANTENNA1:
                return B43_TXH_PHY_ANT1;
        case B43_ANTENNA2:
                return B43_TXH_PHY_ANT2;
        case B43_ANTENNA3:
                return B43_TXH_PHY_ANT3;
        case B43_ANTENNA_AUTO0:
        case B43_ANTENNA_AUTO1:
                return B43_TXH_PHY_ANT01AUTO;
        }
        B43_WARN_ON(1);
        return 0;
}

static void b43_write_beacon_template(struct b43_wldev *dev,
                                      u16 ram_offset,
                                      u16 shm_size_offset)
{
        unsigned int i, len, variable_len;
        const struct ieee80211_mgmt *bcn;
        const u8 *ie;
        bool tim_found = 0;
        unsigned int rate;
        u16 ctl;
        int antenna;
        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);

        bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
        len = min((size_t) dev->wl->current_beacon->len,
                  0x200 - sizeof(struct b43_plcp_hdr6));
        rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;

        b43_write_template_common(dev, (const u8 *)bcn,
                                  len, ram_offset, shm_size_offset, rate);

        /* Write the PHY TX control parameters. */
        antenna = B43_ANTENNA_DEFAULT;
        antenna = b43_antenna_to_phyctl(antenna);
        ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
        /* We can't send beacons with short preamble. Would get PHY errors. */
        ctl &= ~B43_TXH_PHY_SHORTPRMBL;
        ctl &= ~B43_TXH_PHY_ANT;
        ctl &= ~B43_TXH_PHY_ENC;
        ctl |= antenna;
        if (b43_is_cck_rate(rate))
                ctl |= B43_TXH_PHY_ENC_CCK;
        else
                ctl |= B43_TXH_PHY_ENC_OFDM;
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);

        /* Find the position of the TIM and the DTIM_period value
         * and write them to SHM. */
        ie = bcn->u.beacon.variable;
        variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
        for (i = 0; i < variable_len - 2; ) {
                uint8_t ie_id, ie_len;

                ie_id = ie[i];
                ie_len = ie[i + 1];
                if (ie_id == 5) {
                        u16 tim_position;
                        u16 dtim_period;
                        /* This is the TIM Information Element */

                        /* Check whether the ie_len is in the beacon data range. */
                        if (variable_len < ie_len + 2 + i)
                                break;
                        /* A valid TIM is at least 4 bytes long. */
                        if (ie_len < 4)
                                break;
                        tim_found = 1;

                        tim_position = sizeof(struct b43_plcp_hdr6);
                        tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
                        tim_position += i;

                        dtim_period = ie[i + 3];

                        b43_shm_write16(dev, B43_SHM_SHARED,
                                        B43_SHM_SH_TIMBPOS, tim_position);
                        b43_shm_write16(dev, B43_SHM_SHARED,
                                        B43_SHM_SH_DTIMPER, dtim_period);
                        break;
                }
                i += ie_len + 2;
        }
        if (!tim_found) {
                /*
                 * If ucode wants to modify TIM do it behind the beacon, this
                 * will happen, for example, when doing mesh networking.
                 */
                b43_shm_write16(dev, B43_SHM_SHARED,
                                B43_SHM_SH_TIMBPOS,
                                len + sizeof(struct b43_plcp_hdr6));
                b43_shm_write16(dev, B43_SHM_SHARED,
                                B43_SHM_SH_DTIMPER, 0);
        }
        b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
}

static void b43_upload_beacon0(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;

        if (wl->beacon0_uploaded)
                return;
        b43_write_beacon_template(dev, 0x68, 0x18);
        wl->beacon0_uploaded = 1;
}

static void b43_upload_beacon1(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;

        if (wl->beacon1_uploaded)
                return;
        b43_write_beacon_template(dev, 0x468, 0x1A);
        wl->beacon1_uploaded = 1;
}

static void handle_irq_beacon(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;
        u32 cmd, beacon0_valid, beacon1_valid;

        if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
            !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
                return;

        /* This is the bottom half of the asynchronous beacon update. */

        /* Ignore interrupt in the future. */
        dev->irq_mask &= ~B43_IRQ_BEACON;

        cmd = b43_read32(dev, B43_MMIO_MACCMD);
        beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
        beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);

        /* Schedule interrupt manually, if busy. */
        if (beacon0_valid && beacon1_valid) {
                b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
                dev->irq_mask |= B43_IRQ_BEACON;
                return;
        }

        if (unlikely(wl->beacon_templates_virgin)) {
                /* We never uploaded a beacon before.
                 * Upload both templates now, but only mark one valid. */
                wl->beacon_templates_virgin = 0;
                b43_upload_beacon0(dev);
                b43_upload_beacon1(dev);
                cmd = b43_read32(dev, B43_MMIO_MACCMD);
                cmd |= B43_MACCMD_BEACON0_VALID;
                b43_write32(dev, B43_MMIO_MACCMD, cmd);
        } else {
                if (!beacon0_valid) {
                        b43_upload_beacon0(dev);
                        cmd = b43_read32(dev, B43_MMIO_MACCMD);
                        cmd |= B43_MACCMD_BEACON0_VALID;
                        b43_write32(dev, B43_MMIO_MACCMD, cmd);
                } else if (!beacon1_valid) {
                        b43_upload_beacon1(dev);
                        cmd = b43_read32(dev, B43_MMIO_MACCMD);
                        cmd |= B43_MACCMD_BEACON1_VALID;
                        b43_write32(dev, B43_MMIO_MACCMD, cmd);
                }
        }
}

static void b43_do_beacon_update_trigger_work(struct b43_wldev *dev)
{
        u32 old_irq_mask = dev->irq_mask;

        /* update beacon right away or defer to irq */
        handle_irq_beacon(dev);
        if (old_irq_mask != dev->irq_mask) {
                /* The handler updated the IRQ mask. */
                B43_WARN_ON(!dev->irq_mask);
                if (b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)) {
                        b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
                } else {
                        /* Device interrupts are currently disabled. That means
                         * we just ran the hardirq handler and scheduled the
                         * IRQ thread. The thread will write the IRQ mask when
                         * it finished, so there's nothing to do here. Writing
                         * the mask _here_ would incorrectly re-enable IRQs. */
                }
        }
}

static void b43_beacon_update_trigger_work(struct work_struct *work)
{
        struct b43_wl *wl = container_of(work, struct b43_wl,
                                         beacon_update_trigger);
        struct b43_wldev *dev;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
                if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
                        /* wl->mutex is enough. */
                        b43_do_beacon_update_trigger_work(dev);
                        mmiowb();
                } else {
                        spin_lock_irq(&wl->hardirq_lock);
                        b43_do_beacon_update_trigger_work(dev);
                        mmiowb();
                        spin_unlock_irq(&wl->hardirq_lock);
                }
        }
        mutex_unlock(&wl->mutex);
}

/* Asynchronously update the packet templates in template RAM.
 * Locking: Requires wl->mutex to be locked. */
static void b43_update_templates(struct b43_wl *wl)
{
        struct sk_buff *beacon;

        /* This is the top half of the ansynchronous beacon update.
         * The bottom half is the beacon IRQ.
         * Beacon update must be asynchronous to avoid sending an
         * invalid beacon. This can happen for example, if the firmware
         * transmits a beacon while we are updating it. */

        /* We could modify the existing beacon and set the aid bit in
         * the TIM field, but that would probably require resizing and
         * moving of data within the beacon template.
         * Simply request a new beacon and let mac80211 do the hard work. */
        beacon = ieee80211_beacon_get(wl->hw, wl->vif);
        if (unlikely(!beacon))
                return;

        if (wl->current_beacon)
                dev_kfree_skb_any(wl->current_beacon);
        wl->current_beacon = beacon;
        wl->beacon0_uploaded = 0;
        wl->beacon1_uploaded = 0;
        ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
}

static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
{
        b43_time_lock(dev);
        if (dev->dev->id.revision >= 3) {
                b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
                b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
        } else {
                b43_write16(dev, 0x606, (beacon_int >> 6));
                b43_write16(dev, 0x610, beacon_int);
        }
        b43_time_unlock(dev);
        b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}

static void b43_handle_firmware_panic(struct b43_wldev *dev)
{
        u16 reason;

        /* Read the register that contains the reason code for the panic. */
        reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG);
        b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason);

        switch (reason) {
        default:
                b43dbg(dev->wl, "The panic reason is unknown.\n");
                /* fallthrough */
        case B43_FWPANIC_DIE:
                /* Do not restart the controller or firmware.
                 * The device is nonfunctional from now on.
                 * Restarting would result in this panic to trigger again,
                 * so we avoid that recursion. */
                break;
        case B43_FWPANIC_RESTART:
                b43_controller_restart(dev, "Microcode panic");
                break;
        }
}

static void handle_irq_ucode_debug(struct b43_wldev *dev)
{
        unsigned int i, cnt;
        u16 reason, marker_id, marker_line;
        __le16 *buf;

        /* The proprietary firmware doesn't have this IRQ. */
        if (!dev->fw.opensource)
                return;

        /* Read the register that contains the reason code for this IRQ. */
        reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG);

        switch (reason) {
        case B43_DEBUGIRQ_PANIC:
                b43_handle_firmware_panic(dev);
                break;
        case B43_DEBUGIRQ_DUMP_SHM:
                if (!B43_DEBUG)
                        break; /* Only with driver debugging enabled. */
                buf = kmalloc(4096, GFP_ATOMIC);
                if (!buf) {
                        b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n");
                        goto out;
                }
                for (i = 0; i < 4096; i += 2) {
                        u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i);
                        buf[i / 2] = cpu_to_le16(tmp);
                }
                b43info(dev->wl, "Shared memory dump:\n");
                print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
                               16, 2, buf, 4096, 1);
                kfree(buf);
                break;
        case B43_DEBUGIRQ_DUMP_REGS:
                if (!B43_DEBUG)
                        break; /* Only with driver debugging enabled. */
                b43info(dev->wl, "Microcode register dump:\n");
                for (i = 0, cnt = 0; i < 64; i++) {
                        u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i);
                        if (cnt == 0)
                                printk(KERN_INFO);
                        printk("r%02u: 0x%04X  ", i, tmp);
                        cnt++;
                        if (cnt == 6) {
                                printk("\n");
                                cnt = 0;
                        }
                }
                printk("\n");
                break;
        case B43_DEBUGIRQ_MARKER:
                if (!B43_DEBUG)
                        break; /* Only with driver debugging enabled. */
                marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH,
                                           B43_MARKER_ID_REG);
                marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH,
                                             B43_MARKER_LINE_REG);
                b43info(dev->wl, "The firmware just executed the MARKER(%u) "
                        "at line number %u\n",
                        marker_id, marker_line);
                break;
        default:
                b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n",
                       reason);
        }
out:
        /* Acknowledge the debug-IRQ, so the firmware can continue. */
        b43_shm_write16(dev, B43_SHM_SCRATCH,
                        B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
}

static void b43_do_interrupt_thread(struct b43_wldev *dev)
{
        u32 reason;
        u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
        u32 merged_dma_reason = 0;
        int i;

        if (unlikely(b43_status(dev) != B43_STAT_STARTED))
                return;

        reason = dev->irq_reason;
        for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
                dma_reason[i] = dev->dma_reason[i];
                merged_dma_reason |= dma_reason[i];
        }

        if (unlikely(reason & B43_IRQ_MAC_TXERR))
                b43err(dev->wl, "MAC transmission error\n");

        if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
                b43err(dev->wl, "PHY transmission error\n");
                rmb();
                if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
                        atomic_set(&dev->phy.txerr_cnt,
                                   B43_PHY_TX_BADNESS_LIMIT);
                        b43err(dev->wl, "Too many PHY TX errors, "
                                        "restarting the controller\n");
                        b43_controller_restart(dev, "PHY TX errors");
                }
        }

        if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
                                          B43_DMAIRQ_NONFATALMASK))) {
                if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
                        b43err(dev->wl, "Fatal DMA error: "
                               "0x%08X, 0x%08X, 0x%08X, "
                               "0x%08X, 0x%08X, 0x%08X\n",
                               dma_reason[0], dma_reason[1],
                               dma_reason[2], dma_reason[3],
                               dma_reason[4], dma_reason[5]);
                        b43err(dev->wl, "This device does not support DMA "
                               "on your system. Please use PIO instead.\n");
                        b43err(dev->wl, "Unload the b43 module and reload "
                               "with 'pio=1'\n");
                        return;
                }
                if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
                        b43err(dev->wl, "DMA error: "
                               "0x%08X, 0x%08X, 0x%08X, "
                               "0x%08X, 0x%08X, 0x%08X\n",
                               dma_reason[0], dma_reason[1],
                               dma_reason[2], dma_reason[3],
                               dma_reason[4], dma_reason[5]);
                }
        }

        if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
                handle_irq_ucode_debug(dev);
        if (reason & B43_IRQ_TBTT_INDI)
                handle_irq_tbtt_indication(dev);
        if (reason & B43_IRQ_ATIM_END)
                handle_irq_atim_end(dev);
        if (reason & B43_IRQ_BEACON)
                handle_irq_beacon(dev);
        if (reason & B43_IRQ_PMQ)
                handle_irq_pmq(dev);
        if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
                ;/* TODO */
        if (reason & B43_IRQ_NOISESAMPLE_OK)
                handle_irq_noise(dev);

        /* Check the DMA reason registers for received data. */
        if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
                if (b43_using_pio_transfers(dev))
                        b43_pio_rx(dev->pio.rx_queue);
                else
                        b43_dma_rx(dev->dma.rx_ring);
        }
        B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
        B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
        B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE);
        B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
        B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);

        if (reason & B43_IRQ_TX_OK)
                handle_irq_transmit_status(dev);

        /* Re-enable interrupts on the device by restoring the current interrupt mask. */
        b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);

#if B43_DEBUG
        if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
                dev->irq_count++;
                for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
                        if (reason & (1 << i))
                                dev->irq_bit_count[i]++;
                }
        }
#endif
}

/* Interrupt thread handler. Handles device interrupts in thread context. */
static irqreturn_t b43_interrupt_thread_handler(int irq, void *dev_id)
{
        struct b43_wldev *dev = dev_id;

        mutex_lock(&dev->wl->mutex);
        b43_do_interrupt_thread(dev);
        mmiowb();
        mutex_unlock(&dev->wl->mutex);

        return IRQ_HANDLED;
}

static irqreturn_t b43_do_interrupt(struct b43_wldev *dev)
{
        u32 reason;

        /* This code runs under wl->hardirq_lock, but _only_ on non-SDIO busses.
         * On SDIO, this runs under wl->mutex. */

        reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
        if (reason == 0xffffffff)       /* shared IRQ */
                return IRQ_NONE;
        reason &= dev->irq_mask;
        if (!reason)
                return IRQ_HANDLED;

        dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
            & 0x0001DC00;
        dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
            & 0x0000DC00;
        dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
            & 0x0000DC00;
        dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
            & 0x0001DC00;
        dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
            & 0x0000DC00;
/* Unused ring
        dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
            & 0x0000DC00;
*/

        /* ACK the interrupt. */
        b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
        b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
        b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
        b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
        b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
        b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
/* Unused ring
        b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
*/

        /* Disable IRQs on the device. The IRQ thread handler will re-enable them. */
        b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
        /* Save the reason bitmasks for the IRQ thread handler. */
        dev->irq_reason = reason;

        return IRQ_WAKE_THREAD;
}

/* Interrupt handler top-half. This runs with interrupts disabled. */
static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
{
        struct b43_wldev *dev = dev_id;
        irqreturn_t ret;

        if (unlikely(b43_status(dev) < B43_STAT_STARTED))
                return IRQ_NONE;

        spin_lock(&dev->wl->hardirq_lock);
        ret = b43_do_interrupt(dev);
        mmiowb();
        spin_unlock(&dev->wl->hardirq_lock);

        return ret;
}

/* SDIO interrupt handler. This runs in process context. */
static void b43_sdio_interrupt_handler(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;
        irqreturn_t ret;

        mutex_lock(&wl->mutex);

        ret = b43_do_interrupt(dev);
        if (ret == IRQ_WAKE_THREAD)
                b43_do_interrupt_thread(dev);

        mutex_unlock(&wl->mutex);
}

void b43_do_release_fw(struct b43_firmware_file *fw)
{
        release_firmware(fw->data);
        fw->data = NULL;
        fw->filename = NULL;
}

static void b43_release_firmware(struct b43_wldev *dev)
{
        b43_do_release_fw(&dev->fw.ucode);
        b43_do_release_fw(&dev->fw.pcm);
        b43_do_release_fw(&dev->fw.initvals);
        b43_do_release_fw(&dev->fw.initvals_band);
}

static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
{
        const char text[] =
                "You must go to " \
                "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \
                "and download the correct firmware for this driver version. " \
                "Please carefully read all instructions on this website.\n";

        if (error)
                b43err(wl, text);
        else
                b43warn(wl, text);
}

int b43_do_request_fw(struct b43_request_fw_context *ctx,
                      const char *name,
                      struct b43_firmware_file *fw)
{
        const struct firmware *blob;
        struct b43_fw_header *hdr;
        u32 size;
        int err;

        if (!name) {
                /* Don't fetch anything. Free possibly cached firmware. */
                /* FIXME: We should probably keep it anyway, to save some headache
                 * on suspend/resume with multiband devices. */
                b43_do_release_fw(fw);
                return 0;
        }
        if (fw->filename) {
                if ((fw->type == ctx->req_type) &&
                    (strcmp(fw->filename, name) == 0))
                        return 0; /* Already have this fw. */
                /* Free the cached firmware first. */
                /* FIXME: We should probably do this later after we successfully
                 * got the new fw. This could reduce headache with multiband devices.
                 * We could also redesign this to cache the firmware for all possible
                 * bands all the time. */
                b43_do_release_fw(fw);
        }

        switch (ctx->req_type) {
        case B43_FWTYPE_PROPRIETARY:
                snprintf(ctx->fwname, sizeof(ctx->fwname),
                         "b43%s/%s.fw",
                         modparam_fwpostfix, name);
                break;
        case B43_FWTYPE_OPENSOURCE:
                snprintf(ctx->fwname, sizeof(ctx->fwname),
                         "b43-open%s/%s.fw",
                         modparam_fwpostfix, name);
                break;
        default:
                B43_WARN_ON(1);
                return -ENOSYS;
        }
        err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev);
        if (err == -ENOENT) {
                snprintf(ctx->errors[ctx->req_type],
                         sizeof(ctx->errors[ctx->req_type]),
                         "Firmware file \"%s\" not found\n", ctx->fwname);
                return err;
        } else if (err) {
                snprintf(ctx->errors[ctx->req_type],
                         sizeof(ctx->errors[ctx->req_type]),
                         "Firmware file \"%s\" request failed (err=%d)\n",
                         ctx->fwname, err);
                return err;
        }
        if (blob->size < sizeof(struct b43_fw_header))
                goto err_format;
        hdr = (struct b43_fw_header *)(blob->data);
        switch (hdr->type) {
        case B43_FW_TYPE_UCODE:
        case B43_FW_TYPE_PCM:
                size = be32_to_cpu(hdr->size);
                if (size != blob->size - sizeof(struct b43_fw_header))
                        goto err_format;
                /* fallthrough */
        case B43_FW_TYPE_IV:
                if (hdr->ver != 1)
                        goto err_format;
                break;
        default:
                goto err_format;
        }

        fw->data = blob;
        fw->filename = name;
        fw->type = ctx->req_type;

        return 0;

err_format:
        snprintf(ctx->errors[ctx->req_type],
                 sizeof(ctx->errors[ctx->req_type]),
                 "Firmware file \"%s\" format error.\n", ctx->fwname);
        release_firmware(blob);

        return -EPROTO;
}

static int b43_try_request_fw(struct b43_request_fw_context *ctx)
{
        struct b43_wldev *dev = ctx->dev;
        struct b43_firmware *fw = &ctx->dev->fw;
        const u8 rev = ctx->dev->dev->id.revision;
        const char *filename;
        u32 tmshigh;
        int err;

        /* Get microcode */
        tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
        if ((rev >= 5) && (rev <= 10))
                filename = "ucode5";
        else if ((rev >= 11) && (rev <= 12))
                filename = "ucode11";
        else if (rev == 13)
                filename = "ucode13";
        else if (rev == 14)
                filename = "ucode14";
        else if (rev >= 15)
                filename = "ucode15";
        else
                goto err_no_ucode;
        err = b43_do_request_fw(ctx, filename, &fw->ucode);
        if (err)
                goto err_load;

        /* Get PCM code */
        if ((rev >= 5) && (rev <= 10))
                filename = "pcm5";
        else if (rev >= 11)
                filename = NULL;
        else
                goto err_no_pcm;
        fw->pcm_request_failed = 0;
        err = b43_do_request_fw(ctx, filename, &fw->pcm);
        if (err == -ENOENT) {
                /* We did not find a PCM file? Not fatal, but
                 * core rev <= 10 must do without hwcrypto then. */
                fw->pcm_request_failed = 1;
        } else if (err)
                goto err_load;

        /* Get initvals */
        switch (dev->phy.type) {
        case B43_PHYTYPE_A:
                if ((rev >= 5) && (rev <= 10)) {
                        if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
                                filename = "a0g1initvals5";
                        else
                                filename = "a0g0initvals5";
                } else
                        goto err_no_initvals;
                break;
        case B43_PHYTYPE_G:
                if ((rev >= 5) && (rev <= 10))
                        filename = "b0g0initvals5";
                else if (rev >= 13)
                        filename = "b0g0initvals13";
                else
                        goto err_no_initvals;
                break;
        case B43_PHYTYPE_N:
                if ((rev >= 11) && (rev <= 12))
                        filename = "n0initvals11";
                else
                        goto err_no_initvals;
                break;
        case B43_PHYTYPE_LP:
                if (rev == 13)
                        filename = "lp0initvals13";
                else if (rev == 14)
                        filename = "lp0initvals14";
                else if (rev >= 15)
                        filename = "lp0initvals15";
                else
                        goto err_no_initvals;
                break;
        default:
                goto err_no_initvals;
        }
        err = b43_do_request_fw(ctx, filename, &fw->initvals);
        if (err)
                goto err_load;

        /* Get bandswitch initvals */
        switch (dev->phy.type) {
        case B43_PHYTYPE_A:
                if ((rev >= 5) && (rev <= 10)) {
                        if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
                                filename = "a0g1bsinitvals5";
                        else
                                filename = "a0g0bsinitvals5";
                } else if (rev >= 11)
                        filename = NULL;
                else
                        goto err_no_initvals;
                break;
        case B43_PHYTYPE_G:
                if ((rev >= 5) && (rev <= 10))
                        filename = "b0g0bsinitvals5";
                else if (rev >= 11)
                        filename = NULL;
                else
                        goto err_no_initvals;
                break;
        case B43_PHYTYPE_N:
                if ((rev >= 11) && (rev <= 12))
                        filename = "n0bsinitvals11";
                else
                        goto err_no_initvals;
                break;
        case B43_PHYTYPE_LP:
                if (rev == 13)
                        filename = "lp0bsinitvals13";
                else if (rev == 14)
                        filename = "lp0bsinitvals14";
                else if (rev >= 15)
                        filename = "lp0bsinitvals15";
                else
                        goto err_no_initvals;
                break;
        default:
                goto err_no_initvals;
        }
        err = b43_do_request_fw(ctx, filename, &fw->initvals_band);
        if (err)
                goto err_load;

        return 0;

err_no_ucode:
        err = ctx->fatal_failure = -EOPNOTSUPP;
        b43err(dev->wl, "The driver does not know which firmware (ucode) "
               "is required for your device (wl-core rev %u)\n", rev);
        goto error;

err_no_pcm:
        err = ctx->fatal_failure = -EOPNOTSUPP;
        b43err(dev->wl, "The driver does not know which firmware (PCM) "
               "is required for your device (wl-core rev %u)\n", rev);
        goto error;

err_no_initvals:
        err = ctx->fatal_failure = -EOPNOTSUPP;
        b43err(dev->wl, "The driver does not know which firmware (initvals) "
               "is required for your device (wl-core rev %u)\n", rev);
        goto error;

err_load:
        /* We failed to load this firmware image. The error message
         * already is in ctx->errors. Return and let our caller decide
         * what to do. */
        goto error;

error:
        b43_release_firmware(dev);
        return err;
}

static int b43_request_firmware(struct b43_wldev *dev)
{
        struct b43_request_fw_context *ctx;
        unsigned int i;
        int err;
        const char *errmsg;

        ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
        if (!ctx)
                return -ENOMEM;
        ctx->dev = dev;

        ctx->req_type = B43_FWTYPE_PROPRIETARY;
        err = b43_try_request_fw(ctx);
        if (!err)
                goto out; /* Successfully loaded it. */
        err = ctx->fatal_failure;
        if (err)
                goto out;

        ctx->req_type = B43_FWTYPE_OPENSOURCE;
        err = b43_try_request_fw(ctx);
        if (!err)
                goto out; /* Successfully loaded it. */
        err = ctx->fatal_failure;
        if (err)
                goto out;

        /* Could not find a usable firmware. Print the errors. */
        for (i = 0; i < B43_NR_FWTYPES; i++) {
                errmsg = ctx->errors[i];
                if (strlen(errmsg))
                        b43err(dev->wl, errmsg);
        }
        b43_print_fw_helptext(dev->wl, 1);
        err = -ENOENT;

out:
        kfree(ctx);
        return err;
}

static int b43_upload_microcode(struct b43_wldev *dev)
{
        const size_t hdr_len = sizeof(struct b43_fw_header);
        const __be32 *data;
        unsigned int i, len;
        u16 fwrev, fwpatch, fwdate, fwtime;
        u32 tmp, macctl;
        int err = 0;

        /* Jump the microcode PSM to offset 0 */
        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
        macctl |= B43_MACCTL_PSM_JMP0;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);
        /* Zero out all microcode PSM registers and shared memory. */
        for (i = 0; i < 64; i++)
                b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
        for (i = 0; i < 4096; i += 2)
                b43_shm_write16(dev, B43_SHM_SHARED, i, 0);

        /* Upload Microcode. */
        data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
        len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
        b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
        for (i = 0; i < len; i++) {
                b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
                udelay(10);
        }

        if (dev->fw.pcm.data) {
                /* Upload PCM data. */
                data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
                len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
                b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
                b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
                /* No need for autoinc bit in SHM_HW */
                b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
                for (i = 0; i < len; i++) {
                        b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
                        udelay(10);
                }
        }

        b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);

        /* Start the microcode PSM */
        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        macctl &= ~B43_MACCTL_PSM_JMP0;
        macctl |= B43_MACCTL_PSM_RUN;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);

        /* Wait for the microcode to load and respond */
        i = 0;
        while (1) {
                tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
                if (tmp == B43_IRQ_MAC_SUSPENDED)
                        break;
                i++;
                if (i >= 20) {
                        b43err(dev->wl, "Microcode not responding\n");
                        b43_print_fw_helptext(dev->wl, 1);
                        err = -ENODEV;
                        goto error;
                }
                msleep(50);
        }
        b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */

        /* Get and check the revisions. */
        fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
        fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
        fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
        fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);

        if (fwrev <= 0x128) {
                b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
                       "binary drivers older than version 4.x is unsupported. "
                       "You must upgrade your firmware files.\n");
                b43_print_fw_helptext(dev->wl, 1);
                err = -EOPNOTSUPP;
                goto error;
        }
        dev->fw.rev = fwrev;
        dev->fw.patch = fwpatch;
        dev->fw.opensource = (fwdate == 0xFFFF);

        /* Default to use-all-queues. */
        dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
        dev->qos_enabled = !!modparam_qos;
        /* Default to firmware/hardware crypto acceleration. */
        dev->hwcrypto_enabled = 1;

        if (dev->fw.opensource) {
                u16 fwcapa;

                /* Patchlevel info is encoded in the "time" field. */
                dev->fw.patch = fwtime;
                b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
                        dev->fw.rev, dev->fw.patch);

                fwcapa = b43_fwcapa_read(dev);
                if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
                        b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
                        /* Disable hardware crypto and fall back to software crypto. */
                        dev->hwcrypto_enabled = 0;
                }
                if (!(fwcapa & B43_FWCAPA_QOS)) {
                        b43info(dev->wl, "QoS not supported by firmware\n");
                        /* Disable QoS. Tweak hw->queues to 1. It will be restored before
                         * ieee80211_unregister to make sure the networking core can
                         * properly free possible resources. */
                        dev->wl->hw->queues = 1;
                        dev->qos_enabled = 0;
                }
        } else {
                b43info(dev->wl, "Loading firmware version %u.%u "
                        "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
                        fwrev, fwpatch,
                        (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
                        (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
                if (dev->fw.pcm_request_failed) {
                        b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. "
                                "Hardware accelerated cryptography is disabled.\n");
                        b43_print_fw_helptext(dev->wl, 0);
                }
        }

        if (b43_is_old_txhdr_format(dev)) {
                /* We're over the deadline, but we keep support for old fw
                 * until it turns out to be in major conflict with something new. */
                b43warn(dev->wl, "You are using an old firmware image. "
                        "Support for old firmware will be removed soon "
                        "(official deadline was July 2008).\n");
                b43_print_fw_helptext(dev->wl, 0);
        }

        return 0;

error:
        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        macctl &= ~B43_MACCTL_PSM_RUN;
        macctl |= B43_MACCTL_PSM_JMP0;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);

        return err;
}

static int b43_write_initvals(struct b43_wldev *dev,
                              const struct b43_iv *ivals,
                              size_t count,
                              size_t array_size)
{
        const struct b43_iv *iv;
        u16 offset;
        size_t i;
        bool bit32;

        BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
        iv = ivals;
        for (i = 0; i < count; i++) {
                if (array_size < sizeof(iv->offset_size))
                        goto err_format;
                array_size -= sizeof(iv->offset_size);
                offset = be16_to_cpu(iv->offset_size);
                bit32 = !!(offset & B43_IV_32BIT);
                offset &= B43_IV_OFFSET_MASK;
                if (offset >= 0x1000)
                        goto err_format;
                if (bit32) {
                        u32 value;

                        if (array_size < sizeof(iv->data.d32))
                                goto err_format;
                        array_size -= sizeof(iv->data.d32);

                        value = get_unaligned_be32(&iv->data.d32);
                        b43_write32(dev, offset, value);

                        iv = (const struct b43_iv *)((const uint8_t *)iv +
                                                        sizeof(__be16) +
                                                        sizeof(__be32));
                } else {
                        u16 value;

                        if (array_size < sizeof(iv->data.d16))
                                goto err_format;
                        array_size -= sizeof(iv->data.d16);

                        value = be16_to_cpu(iv->data.d16);
                        b43_write16(dev, offset, value);

                        iv = (const struct b43_iv *)((const uint8_t *)iv +
                                                        sizeof(__be16) +
                                                        sizeof(__be16));
                }
        }
        if (array_size)
                goto err_format;

        return 0;

err_format:
        b43err(dev->wl, "Initial Values Firmware file-format error.\n");
        b43_print_fw_helptext(dev->wl, 1);

        return -EPROTO;
}

static int b43_upload_initvals(struct b43_wldev *dev)
{
        const size_t hdr_len = sizeof(struct b43_fw_header);
        const struct b43_fw_header *hdr;
        struct b43_firmware *fw = &dev->fw;
        const struct b43_iv *ivals;
        size_t count;
        int err;

        hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
        ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
        count = be32_to_cpu(hdr->size);
        err = b43_write_initvals(dev, ivals, count,
                                 fw->initvals.data->size - hdr_len);
        if (err)
                goto out;
        if (fw->initvals_band.data) {
                hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
                ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
                count = be32_to_cpu(hdr->size);
                err = b43_write_initvals(dev, ivals, count,
                                         fw->initvals_band.data->size - hdr_len);
                if (err)
                        goto out;
        }
out:

        return err;
}

/* Initialize the GPIOs
 * http://bcm-specs.sipsolutions.net/GPIO
 */
static int b43_gpio_init(struct b43_wldev *dev)
{
        struct ssb_bus *bus = dev->dev->bus;
        struct ssb_device *gpiodev, *pcidev = NULL;
        u32 mask, set;

        b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
                    & ~B43_MACCTL_GPOUTSMSK);

        b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
                    | 0x000F);

        mask = 0x0000001F;
        set = 0x0000000F;
        if (dev->dev->bus->chip_id == 0x4301) {
                mask |= 0x0060;
                set |= 0x0060;
        }
        if (0 /* FIXME: conditional unknown */ ) {
                b43_write16(dev, B43_MMIO_GPIO_MASK,
                            b43_read16(dev, B43_MMIO_GPIO_MASK)
                            | 0x0100);
                mask |= 0x0180;
                set |= 0x0180;
        }
        if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
                b43_write16(dev, B43_MMIO_GPIO_MASK,
                            b43_read16(dev, B43_MMIO_GPIO_MASK)
                            | 0x0200);
                mask |= 0x0200;
                set |= 0x0200;
        }
        if (dev->dev->id.revision >= 2)
                mask |= 0x0010; /* FIXME: This is redundant. */

#ifdef CONFIG_SSB_DRIVER_PCICORE
        pcidev = bus->pcicore.dev;
#endif
        gpiodev = bus->chipco.dev ? : pcidev;
        if (!gpiodev)
                return 0;
        ssb_write32(gpiodev, B43_GPIO_CONTROL,
                    (ssb_read32(gpiodev, B43_GPIO_CONTROL)
                     & mask) | set);

        return 0;
}

/* Turn off all GPIO stuff. Call this on module unload, for example. */
static void b43_gpio_cleanup(struct b43_wldev *dev)
{
        struct ssb_bus *bus = dev->dev->bus;
        struct ssb_device *gpiodev, *pcidev = NULL;

#ifdef CONFIG_SSB_DRIVER_PCICORE
        pcidev = bus->pcicore.dev;
#endif
        gpiodev = bus->chipco.dev ? : pcidev;
        if (!gpiodev)
                return;
        ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
}

/* http://bcm-specs.sipsolutions.net/EnableMac */
void b43_mac_enable(struct b43_wldev *dev)
{
        if (b43_debug(dev, B43_DBG_FIRMWARE)) {
                u16 fwstate;

                fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
                                         B43_SHM_SH_UCODESTAT);
                if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) &&
                    (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) {
                        b43err(dev->wl, "b43_mac_enable(): The firmware "
                               "should be suspended, but current state is %u\n",
                               fwstate);
                }
        }

        dev->mac_suspended--;
        B43_WARN_ON(dev->mac_suspended < 0);
        if (dev->mac_suspended == 0) {
                b43_write32(dev, B43_MMIO_MACCTL,
                            b43_read32(dev, B43_MMIO_MACCTL)
                            | B43_MACCTL_ENABLED);
                b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
                            B43_IRQ_MAC_SUSPENDED);
                /* Commit writes */
                b43_read32(dev, B43_MMIO_MACCTL);
                b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
                b43_power_saving_ctl_bits(dev, 0);
        }
}

/* http://bcm-specs.sipsolutions.net/SuspendMAC */
void b43_mac_suspend(struct b43_wldev *dev)
{
        int i;
        u32 tmp;

        might_sleep();
        B43_WARN_ON(dev->mac_suspended < 0);

        if (dev->mac_suspended == 0) {
                b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
                b43_write32(dev, B43_MMIO_MACCTL,
                            b43_read32(dev, B43_MMIO_MACCTL)
                            & ~B43_MACCTL_ENABLED);
                /* force pci to flush the write */
                b43_read32(dev, B43_MMIO_MACCTL);
                for (i = 35; i; i--) {
                        tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
                        if (tmp & B43_IRQ_MAC_SUSPENDED)
                                goto out;
                        udelay(10);
                }
                /* Hm, it seems this will take some time. Use msleep(). */
                for (i = 40; i; i--) {
                        tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
                        if (tmp & B43_IRQ_MAC_SUSPENDED)
                                goto out;
                        msleep(1);
                }
                b43err(dev->wl, "MAC suspend failed\n");
        }
out:
        dev->mac_suspended++;
}

static void b43_adjust_opmode(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;
        u32 ctl;
        u16 cfp_pretbtt;

        ctl = b43_read32(dev, B43_MMIO_MACCTL);
        /* Reset status to STA infrastructure mode. */
        ctl &= ~B43_MACCTL_AP;
        ctl &= ~B43_MACCTL_KEEP_CTL;
        ctl &= ~B43_MACCTL_KEEP_BADPLCP;
        ctl &= ~B43_MACCTL_KEEP_BAD;
        ctl &= ~B43_MACCTL_PROMISC;
        ctl &= ~B43_MACCTL_BEACPROMISC;
        ctl |= B43_MACCTL_INFRA;

        if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
            b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
                ctl |= B43_MACCTL_AP;
        else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
                ctl &= ~B43_MACCTL_INFRA;

        if (wl->filter_flags & FIF_CONTROL)
                ctl |= B43_MACCTL_KEEP_CTL;
        if (wl->filter_flags & FIF_FCSFAIL)
                ctl |= B43_MACCTL_KEEP_BAD;
        if (wl->filter_flags & FIF_PLCPFAIL)
                ctl |= B43_MACCTL_KEEP_BADPLCP;
        if (wl->filter_flags & FIF_PROMISC_IN_BSS)
                ctl |= B43_MACCTL_PROMISC;
        if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
                ctl |= B43_MACCTL_BEACPROMISC;

        /* Workaround: On old hardware the HW-MAC-address-filter
         * doesn't work properly, so always run promisc in filter
         * it in software. */
        if (dev->dev->id.revision <= 4)
                ctl |= B43_MACCTL_PROMISC;

        b43_write32(dev, B43_MMIO_MACCTL, ctl);

        cfp_pretbtt = 2;
        if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
                if (dev->dev->bus->chip_id == 0x4306 &&
                    dev->dev->bus->chip_rev == 3)
                        cfp_pretbtt = 100;
                else
                        cfp_pretbtt = 50;
        }
        b43_write16(dev, 0x612, cfp_pretbtt);

        /* FIXME: We don't currently implement the PMQ mechanism,
         *        so always disable it. If we want to implement PMQ,
         *        we need to enable it here (clear DISCPMQ) in AP mode.
         */
        if (0  /* ctl & B43_MACCTL_AP */) {
                b43_write32(dev, B43_MMIO_MACCTL,
                            b43_read32(dev, B43_MMIO_MACCTL)
                            & ~B43_MACCTL_DISCPMQ);
        } else {
                b43_write32(dev, B43_MMIO_MACCTL,
                            b43_read32(dev, B43_MMIO_MACCTL)
                            | B43_MACCTL_DISCPMQ);
        }
}

static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
{
        u16 offset;

        if (is_ofdm) {
                offset = 0x480;
                offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
        } else {
                offset = 0x4C0;
                offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
        }
        b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
                        b43_shm_read16(dev, B43_SHM_SHARED, offset));
}

static void b43_rate_memory_init(struct b43_wldev *dev)
{
        switch (dev->phy.type) {
        case B43_PHYTYPE_A:
        case B43_PHYTYPE_G:
        case B43_PHYTYPE_N:
        case B43_PHYTYPE_LP:
                b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
                b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
                b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
                b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
                b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
                b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
                b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
                if (dev->phy.type == B43_PHYTYPE_A)
                        break;
                /* fallthrough */
        case B43_PHYTYPE_B:
                b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
                b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
                b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
                b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
                break;
        default:
                B43_WARN_ON(1);
        }
}

/* Set the default values for the PHY TX Control Words. */
static void b43_set_phytxctl_defaults(struct b43_wldev *dev)
{
        u16 ctl = 0;

        ctl |= B43_TXH_PHY_ENC_CCK;
        ctl |= B43_TXH_PHY_ANT01AUTO;
        ctl |= B43_TXH_PHY_TXPWR;

        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl);
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl);
}

/* Set the TX-Antenna for management frames sent by firmware. */
static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
{
        u16 ant;
        u16 tmp;

        ant = b43_antenna_to_phyctl(antenna);

        /* For ACK/CTS */
        tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
        tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
        /* For Probe Resposes */
        tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
        tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
}

/* This is the opposite of b43_chip_init() */
static void b43_chip_exit(struct b43_wldev *dev)
{
        b43_phy_exit(dev);
        b43_gpio_cleanup(dev);
        /* firmware is released later */
}

/* Initialize the chip
 * http://bcm-specs.sipsolutions.net/ChipInit
 */
static int b43_chip_init(struct b43_wldev *dev)
{
        struct b43_phy *phy = &dev->phy;
        int err;
        u32 value32, macctl;
        u16 value16;

        /* Initialize the MAC control */
        macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
        if (dev->phy.gmode)
                macctl |= B43_MACCTL_GMODE;
        macctl |= B43_MACCTL_INFRA;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);

        err = b43_request_firmware(dev);
        if (err)
                goto out;
        err = b43_upload_microcode(dev);
        if (err)
                goto out;       /* firmware is released later */

        err = b43_gpio_init(dev);
        if (err)
                goto out;       /* firmware is released later */

        err = b43_upload_initvals(dev);
        if (err)
                goto err_gpio_clean;

        /* Turn the Analog on and initialize the PHY. */
        phy->ops->switch_analog(dev, 1);
        err = b43_phy_init(dev);
        if (err)
                goto err_gpio_clean;

        /* Disable Interference Mitigation. */
        if (phy->ops->interf_mitigation)
                phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);

        /* Select the antennae */
        if (phy->ops->set_rx_antenna)
                phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
        b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);

        if (phy->type == B43_PHYTYPE_B) {
                value16 = b43_read16(dev, 0x005E);
                value16 |= 0x0004;
                b43_write16(dev, 0x005E, value16);
        }
        b43_write32(dev, 0x0100, 0x01000000);
        if (dev->dev->id.revision < 5)
                b43_write32(dev, 0x010C, 0x01000000);

        b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
                    & ~B43_MACCTL_INFRA);
        b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
                    | B43_MACCTL_INFRA);

        /* Probe Response Timeout value */
        /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
        b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);

        /* Initially set the wireless operation mode. */
        b43_adjust_opmode(dev);

        if (dev->dev->id.revision < 3) {
                b43_write16(dev, 0x060E, 0x0000);
                b43_write16(dev, 0x0610, 0x8000);
                b43_write16(dev, 0x0604, 0x0000);
                b43_write16(dev, 0x0606, 0x0200);
        } else {
                b43_write32(dev, 0x0188, 0x80000000);
                b43_write32(dev, 0x018C, 0x02000000);
        }
        b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
        b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
        b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
        b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
        b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
        b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
        b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);

        value32 = ssb_read32(dev->dev, SSB_TMSLOW);
        value32 |= 0x00100000;
        ssb_write32(dev->dev, SSB_TMSLOW, value32);

        b43_write16(dev, B43_MMIO_POWERUP_DELAY,
                    dev->dev->bus->chipco.fast_pwrup_delay);

        err = 0;
        b43dbg(dev->wl, "Chip initialized\n");
out:
        return err;

err_gpio_clean:
        b43_gpio_cleanup(dev);
        return err;
}

static void b43_periodic_every60sec(struct b43_wldev *dev)
{
        const struct b43_phy_operations *ops = dev->phy.ops;

        if (ops->pwork_60sec)
                ops->pwork_60sec(dev);

        /* Force check the TX power emission now. */
        b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME);
}

static void b43_periodic_every30sec(struct b43_wldev *dev)
{
        /* Update device statistics. */
        b43_calculate_link_quality(dev);
}

static void b43_periodic_every15sec(struct b43_wldev *dev)
{
        struct b43_phy *phy = &dev->phy;
        u16 wdr;

        if (dev->fw.opensource) {
                /* Check if the firmware is still alive.
                 * It will reset the watchdog counter to 0 in its idle loop. */
                wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG);
                if (unlikely(wdr)) {
                        b43err(dev->wl, "Firmware watchdog: The firmware died!\n");
                        b43_controller_restart(dev, "Firmware watchdog");
                        return;
                } else {
                        b43_shm_write16(dev, B43_SHM_SCRATCH,
                                        B43_WATCHDOG_REG, 1);
                }
        }

        if (phy->ops->pwork_15sec)
                phy->ops->pwork_15sec(dev);

        atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
        wmb();

#if B43_DEBUG
        if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
                unsigned int i;

                b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
                       dev->irq_count / 15,
                       dev->tx_count / 15,
                       dev->rx_count / 15);
                dev->irq_count = 0;
                dev->tx_count = 0;
                dev->rx_count = 0;
                for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
                        if (dev->irq_bit_count[i]) {
                                b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
                                       dev->irq_bit_count[i] / 15, i, (1 << i));
                                dev->irq_bit_count[i] = 0;
                        }
                }
        }
#endif
}

static void do_periodic_work(struct b43_wldev *dev)
{
        unsigned int state;

        state = dev->periodic_state;
        if (state % 4 == 0)
                b43_periodic_every60sec(dev);
        if (state % 2 == 0)
                b43_periodic_every30sec(dev);
        b43_periodic_every15sec(dev);
}

/* Periodic work locking policy:
 *      The whole periodic work handler is protected by
 *      wl->mutex. If another lock is needed somewhere in the
 *      pwork callchain, it's aquired in-place, where it's needed.
 */
static void b43_periodic_work_handler(struct work_struct *work)
{
        struct b43_wldev *dev = container_of(work, struct b43_wldev,
                                             periodic_work.work);
        struct b43_wl *wl = dev->wl;
        unsigned long delay;

        mutex_lock(&wl->mutex);

        if (unlikely(b43_status(dev) != B43_STAT_STARTED))
                goto out;
        if (b43_debug(dev, B43_DBG_PWORK_STOP))
                goto out_requeue;

        do_periodic_work(dev);

        dev->periodic_state++;
out_requeue:
        if (b43_debug(dev, B43_DBG_PWORK_FAST))
                delay = msecs_to_jiffies(50);
        else
                delay = round_jiffies_relative(HZ * 15);
        ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay);
out:
        mutex_unlock(&wl->mutex);
}

static void b43_periodic_tasks_setup(struct b43_wldev *dev)
{
        struct delayed_work *work = &dev->periodic_work;

        dev->periodic_state = 0;
        INIT_DELAYED_WORK(work, b43_periodic_work_handler);
        ieee80211_queue_delayed_work(dev->wl->hw, work, 0);
}

/* Check if communication with the device works correctly. */
static int b43_validate_chipaccess(struct b43_wldev *dev)
{
        u32 v, backup0, backup4;

        backup0 = b43_shm_read32(dev, B43_SHM_SHARED, 0);
        backup4 = b43_shm_read32(dev, B43_SHM_SHARED, 4);

        /* Check for read/write and endianness problems. */
        b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
        if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
                goto error;
        b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
        if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
                goto error;

        /* Check if unaligned 32bit SHM_SHARED access works properly.
         * However, don't bail out on failure, because it's noncritical. */
        b43_shm_write16(dev, B43_SHM_SHARED, 0, 0x1122);
        b43_shm_write16(dev, B43_SHM_SHARED, 2, 0x3344);
        b43_shm_write16(dev, B43_SHM_SHARED, 4, 0x5566);
        b43_shm_write16(dev, B43_SHM_SHARED, 6, 0x7788);
        if (b43_shm_read32(dev, B43_SHM_SHARED, 2) != 0x55663344)
                b43warn(dev->wl, "Unaligned 32bit SHM read access is broken\n");
        b43_shm_write32(dev, B43_SHM_SHARED, 2, 0xAABBCCDD);
        if (b43_shm_read16(dev, B43_SHM_SHARED, 0) != 0x1122 ||
            b43_shm_read16(dev, B43_SHM_SHARED, 2) != 0xCCDD ||
            b43_shm_read16(dev, B43_SHM_SHARED, 4) != 0xAABB ||
            b43_shm_read16(dev, B43_SHM_SHARED, 6) != 0x7788)
                b43warn(dev->wl, "Unaligned 32bit SHM write access is broken\n");

        b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
        b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);

        if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
                /* The 32bit register shadows the two 16bit registers
                 * with update sideeffects. Validate this. */
                b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
                b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
                if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
                        goto error;
                if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
                        goto error;
        }
        b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);

        v = b43_read32(dev, B43_MMIO_MACCTL);
        v |= B43_MACCTL_GMODE;
        if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
                goto error;

        return 0;
error:
        b43err(dev->wl, "Failed to validate the chipaccess\n");
        return -ENODEV;
}

static void b43_security_init(struct b43_wldev *dev)
{
        dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
        /* KTP is a word address, but we address SHM bytewise.
         * So multiply by two.
         */
        dev->ktp *= 2;
        /* Number of RCMTA address slots */
        b43_write16(dev, B43_MMIO_RCMTA_COUNT, B43_NR_PAIRWISE_KEYS);
        /* Clear the key memory. */
        b43_clear_keys(dev);
}

#ifdef CONFIG_B43_HWRNG
static int b43_rng_read(struct hwrng *rng, u32 *data)
{
        struct b43_wl *wl = (struct b43_wl *)rng->priv;
        struct b43_wldev *dev;
        int count = -ENODEV;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
                *data = b43_read16(dev, B43_MMIO_RNG);
                count = sizeof(u16);
        }
        mutex_unlock(&wl->mutex);

        return count;
}
#endif /* CONFIG_B43_HWRNG */

static void b43_rng_exit(struct b43_wl *wl)
{
#ifdef CONFIG_B43_HWRNG
        if (wl->rng_initialized)
                hwrng_unregister(&wl->rng);
#endif /* CONFIG_B43_HWRNG */
}

static int b43_rng_init(struct b43_wl *wl)
{
        int err = 0;

#ifdef CONFIG_B43_HWRNG
        snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
                 "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
        wl->rng.name = wl->rng_name;
        wl->rng.data_read = b43_rng_read;
        wl->rng.priv = (unsigned long)wl;
        wl->rng_initialized = 1;
        err = hwrng_register(&wl->rng);
        if (err) {
                wl->rng_initialized = 0;
                b43err(wl, "Failed to register the random "
                       "number generator (%d)\n", err);
        }
#endif /* CONFIG_B43_HWRNG */

        return err;
}

static void b43_tx_work(struct work_struct *work)
{
        struct b43_wl *wl = container_of(work, struct b43_wl, tx_work);
        struct b43_wldev *dev;
        struct sk_buff *skb;
        int err = 0;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) {
                mutex_unlock(&wl->mutex);
                return;
        }

        while (skb_queue_len(&wl->tx_queue)) {
                skb = skb_dequeue(&wl->tx_queue);

                if (b43_using_pio_transfers(dev))
                        err = b43_pio_tx(dev, skb);
                else
                        err = b43_dma_tx(dev, skb);
                if (unlikely(err))
                        dev_kfree_skb(skb); /* Drop it */
        }

#if B43_DEBUG
        dev->tx_count++;
#endif
        mutex_unlock(&wl->mutex);
}

static int b43_op_tx(struct ieee80211_hw *hw,
                     struct sk_buff *skb)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);

        if (unlikely(skb->len < 2 + 2 + 6)) {
                /* Too short, this can't be a valid frame. */
                dev_kfree_skb_any(skb);
                return NETDEV_TX_OK;
        }
        B43_WARN_ON(skb_shinfo(skb)->nr_frags);

        skb_queue_tail(&wl->tx_queue, skb);
        ieee80211_queue_work(wl->hw, &wl->tx_work);

        return NETDEV_TX_OK;
}

static void b43_qos_params_upload(struct b43_wldev *dev,
                                  const struct ieee80211_tx_queue_params *p,
                                  u16 shm_offset)
{
        u16 params[B43_NR_QOSPARAMS];
        int bslots, tmp;
        unsigned int i;

        if (!dev->qos_enabled)
                return;

        bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;

        memset(&params, 0, sizeof(params));

        params[B43_QOSPARAM_TXOP] = p->txop * 32;
        params[B43_QOSPARAM_CWMIN] = p->cw_min;
        params[B43_QOSPARAM_CWMAX] = p->cw_max;
        params[B43_QOSPARAM_CWCUR] = p->cw_min;
        params[B43_QOSPARAM_AIFS] = p->aifs;
        params[B43_QOSPARAM_BSLOTS] = bslots;
        params[B43_QOSPARAM_REGGAP] = bslots + p->aifs;

        for (i = 0; i < ARRAY_SIZE(params); i++) {
                if (i == B43_QOSPARAM_STATUS) {
                        tmp = b43_shm_read16(dev, B43_SHM_SHARED,
                                             shm_offset + (i * 2));
                        /* Mark the parameters as updated. */
                        tmp |= 0x100;
                        b43_shm_write16(dev, B43_SHM_SHARED,
                                        shm_offset + (i * 2),
                                        tmp);
                } else {
                        b43_shm_write16(dev, B43_SHM_SHARED,
                                        shm_offset + (i * 2),
                                        params[i]);
                }
        }
}

/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */
static const u16 b43_qos_shm_offsets[] = {
        /* [mac80211-queue-nr] = SHM_OFFSET, */
        [0] = B43_QOS_VOICE,
        [1] = B43_QOS_VIDEO,
        [2] = B43_QOS_BESTEFFORT,
        [3] = B43_QOS_BACKGROUND,
};

/* Update all QOS parameters in hardware. */
static void b43_qos_upload_all(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;
        struct b43_qos_params *params;
        unsigned int i;

        if (!dev->qos_enabled)
                return;

        BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
                     ARRAY_SIZE(wl->qos_params));

        b43_mac_suspend(dev);
        for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
                params = &(wl->qos_params[i]);
                b43_qos_params_upload(dev, &(params->p),
                                      b43_qos_shm_offsets[i]);
        }
        b43_mac_enable(dev);
}

static void b43_qos_clear(struct b43_wl *wl)
{
        struct b43_qos_params *params;
        unsigned int i;

        /* Initialize QoS parameters to sane defaults. */

        BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
                     ARRAY_SIZE(wl->qos_params));

        for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
                params = &(wl->qos_params[i]);

                switch (b43_qos_shm_offsets[i]) {
                case B43_QOS_VOICE:
                        params->p.txop = 0;
                        params->p.aifs = 2;
                        params->p.cw_min = 0x0001;
                        params->p.cw_max = 0x0001;
                        break;
                case B43_QOS_VIDEO:
                        params->p.txop = 0;
                        params->p.aifs = 2;
                        params->p.cw_min = 0x0001;
                        params->p.cw_max = 0x0001;
                        break;
                case B43_QOS_BESTEFFORT:
                        params->p.txop = 0;
                        params->p.aifs = 3;
                        params->p.cw_min = 0x0001;
                        params->p.cw_max = 0x03FF;
                        break;
                case B43_QOS_BACKGROUND:
                        params->p.txop = 0;
                        params->p.aifs = 7;
                        params->p.cw_min = 0x0001;
                        params->p.cw_max = 0x03FF;
                        break;
                default:
                        B43_WARN_ON(1);
                }
        }
}

/* Initialize the core's QOS capabilities */
static void b43_qos_init(struct b43_wldev *dev)
{
        if (!dev->qos_enabled) {
                /* Disable QOS support. */
                b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_EDCF);
                b43_write16(dev, B43_MMIO_IFSCTL,
                            b43_read16(dev, B43_MMIO_IFSCTL)
                            & ~B43_MMIO_IFSCTL_USE_EDCF);
                b43dbg(dev->wl, "QoS disabled\n");
                return;
        }

        /* Upload the current QOS parameters. */
        b43_qos_upload_all(dev);

        /* Enable QOS support. */
        b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
        b43_write16(dev, B43_MMIO_IFSCTL,
                    b43_read16(dev, B43_MMIO_IFSCTL)
                    | B43_MMIO_IFSCTL_USE_EDCF);
        b43dbg(dev->wl, "QoS enabled\n");
}

static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
                          const struct ieee80211_tx_queue_params *params)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        unsigned int queue = (unsigned int)_queue;
        int err = -ENODEV;

        if (queue >= ARRAY_SIZE(wl->qos_params)) {
                /* Queue not available or don't support setting
                 * params on this queue. Return success to not
                 * confuse mac80211. */
                return 0;
        }
        BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
                     ARRAY_SIZE(wl->qos_params));

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED)))
                goto out_unlock;

        memcpy(&(wl->qos_params[queue].p), params, sizeof(*params));
        b43_mac_suspend(dev);
        b43_qos_params_upload(dev, &(wl->qos_params[queue].p),
                              b43_qos_shm_offsets[queue]);
        b43_mac_enable(dev);
        err = 0;

out_unlock:
        mutex_unlock(&wl->mutex);

        return err;
}

static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
                               struct ieee80211_tx_queue_stats *stats)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        int err = -ENODEV;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (dev && b43_status(dev) >= B43_STAT_STARTED) {
                if (b43_using_pio_transfers(dev))
                        b43_pio_get_tx_stats(dev, stats);
                else
                        b43_dma_get_tx_stats(dev, stats);
                err = 0;
        }
        mutex_unlock(&wl->mutex);

        return err;
}

static int b43_op_get_stats(struct ieee80211_hw *hw,
                            struct ieee80211_low_level_stats *stats)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);

        mutex_lock(&wl->mutex);
        memcpy(stats, &wl->ieee_stats, sizeof(*stats));
        mutex_unlock(&wl->mutex);

        return 0;
}

static u64 b43_op_get_tsf(struct ieee80211_hw *hw)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        u64 tsf;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;

        if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
                b43_tsf_read(dev, &tsf);
        else
                tsf = 0;

        mutex_unlock(&wl->mutex);

        return tsf;
}

static void b43_op_set_tsf(struct ieee80211_hw *hw, u64 tsf)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;

        if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
                b43_tsf_write(dev, tsf);

        mutex_unlock(&wl->mutex);
}

static void b43_put_phy_into_reset(struct b43_wldev *dev)
{
        struct ssb_device *sdev = dev->dev;
        u32 tmslow;

        tmslow = ssb_read32(sdev, SSB_TMSLOW);
        tmslow &= ~B43_TMSLOW_GMODE;
        tmslow |= B43_TMSLOW_PHYRESET;
        tmslow |= SSB_TMSLOW_FGC;
        ssb_write32(sdev, SSB_TMSLOW, tmslow);
        msleep(1);

        tmslow = ssb_read32(sdev, SSB_TMSLOW);
        tmslow &= ~SSB_TMSLOW_FGC;
        tmslow |= B43_TMSLOW_PHYRESET;
        ssb_write32(sdev, SSB_TMSLOW, tmslow);
        msleep(1);
}

static const char *band_to_string(enum ieee80211_band band)
{
        switch (band) {
        case IEEE80211_BAND_5GHZ:
                return "5";
        case IEEE80211_BAND_2GHZ:
                return "2.4";
        default:
                break;
        }
        B43_WARN_ON(1);
        return "";
}

/* Expects wl->mutex locked */
static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
{
        struct b43_wldev *up_dev = NULL;
        struct b43_wldev *down_dev;
        struct b43_wldev *d;
        int err;
        bool uninitialized_var(gmode);
        int prev_status;

        /* Find a device and PHY which supports the band. */
        list_for_each_entry(d, &wl->devlist, list) {
                switch (chan->band) {
                case IEEE80211_BAND_5GHZ:
                        if (d->phy.supports_5ghz) {
                                up_dev = d;
                                gmode = 0;
                        }
                        break;
                case IEEE80211_BAND_2GHZ:
                        if (d->phy.supports_2ghz) {
                                up_dev = d;
                                gmode = 1;
                        }
                        break;
                default:
                        B43_WARN_ON(1);
                        return -EINVAL;
                }
                if (up_dev)
                        break;
        }
        if (!up_dev) {
                b43err(wl, "Could not find a device for %s-GHz band operation\n",
                       band_to_string(chan->band));
                return -ENODEV;
        }
        if ((up_dev == wl->current_dev) &&
            (!!wl->current_dev->phy.gmode == !!gmode)) {
                /* This device is already running. */
                return 0;
        }
        b43dbg(wl, "Switching to %s-GHz band\n",
               band_to_string(chan->band));
        down_dev = wl->current_dev;

        prev_status = b43_status(down_dev);
        /* Shutdown the currently running core. */
        if (prev_status >= B43_STAT_STARTED)
                down_dev = b43_wireless_core_stop(down_dev);
        if (prev_status >= B43_STAT_INITIALIZED)
                b43_wireless_core_exit(down_dev);

        if (down_dev != up_dev) {
                /* We switch to a different core, so we put PHY into
                 * RESET on the old core. */
                b43_put_phy_into_reset(down_dev);
        }

        /* Now start the new core. */
        up_dev->phy.gmode = gmode;
        if (prev_status >= B43_STAT_INITIALIZED) {
                err = b43_wireless_core_init(up_dev);
                if (err) {
                        b43err(wl, "Fatal: Could not initialize device for "
                               "selected %s-GHz band\n",
                               band_to_string(chan->band));
                        goto init_failure;
                }
        }
        if (prev_status >= B43_STAT_STARTED) {
                err = b43_wireless_core_start(up_dev);
                if (err) {
                        b43err(wl, "Fatal: Coult not start device for "
                               "selected %s-GHz band\n",
                               band_to_string(chan->band));
                        b43_wireless_core_exit(up_dev);
                        goto init_failure;
                }
        }
        B43_WARN_ON(b43_status(up_dev) != prev_status);

        wl->current_dev = up_dev;

        return 0;
init_failure:
        /* Whoops, failed to init the new core. No core is operating now. */
        wl->current_dev = NULL;
        return err;
}

/* Write the short and long frame retry limit values. */
static void b43_set_retry_limits(struct b43_wldev *dev,
                                 unsigned int short_retry,
                                 unsigned int long_retry)
{
        /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
         * the chip-internal counter. */
        short_retry = min(short_retry, (unsigned int)0xF);
        long_retry = min(long_retry, (unsigned int)0xF);

        b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
                        short_retry);
        b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
                        long_retry);
}

static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        struct b43_phy *phy;
        struct ieee80211_conf *conf = &hw->conf;
        int antenna;
        int err = 0;

        mutex_lock(&wl->mutex);

        /* Switch the band (if necessary). This might change the active core. */
        err = b43_switch_band(wl, conf->channel);
        if (err)
                goto out_unlock_mutex;
        dev = wl->current_dev;
        phy = &dev->phy;

        b43_mac_suspend(dev);

        if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
                b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
                                          conf->long_frame_max_tx_count);
        changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
        if (!changed)
                goto out_mac_enable;

        /* Switch to the requested channel.
         * The firmware takes care of races with the TX handler. */
        if (conf->channel->hw_value != phy->channel)
                b43_switch_channel(dev, conf->channel->hw_value);

        dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);

        /* Adjust the desired TX power level. */
        if (conf->power_level != 0) {
                if (conf->power_level != phy->desired_txpower) {
                        phy->desired_txpower = conf->power_level;
                        b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
                                                   B43_TXPWR_IGNORE_TSSI);
                }
        }

        /* Antennas for RX and management frame TX. */
        antenna = B43_ANTENNA_DEFAULT;
        b43_mgmtframe_txantenna(dev, antenna);
        antenna = B43_ANTENNA_DEFAULT;
        if (phy->ops->set_rx_antenna)
                phy->ops->set_rx_antenna(dev, antenna);

        if (wl->radio_enabled != phy->radio_on) {
                if (wl->radio_enabled) {
                        b43_software_rfkill(dev, false);
                        b43info(dev->wl, "Radio turned on by software\n");
                        if (!dev->radio_hw_enable) {
                                b43info(dev->wl, "The hardware RF-kill button "
                                        "still turns the radio physically off. "
                                        "Press the button to turn it on.\n");
                        }
                } else {
                        b43_software_rfkill(dev, true);
                        b43info(dev->wl, "Radio turned off by software\n");
                }
        }

out_mac_enable:
        b43_mac_enable(dev);
out_unlock_mutex:
        mutex_unlock(&wl->mutex);

        return err;
}

static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates)
{
        struct ieee80211_supported_band *sband =
                dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)];
        struct ieee80211_rate *rate;
        int i;
        u16 basic, direct, offset, basic_offset, rateptr;

        for (i = 0; i < sband->n_bitrates; i++) {
                rate = &sband->bitrates[i];

                if (b43_is_cck_rate(rate->hw_value)) {
                        direct = B43_SHM_SH_CCKDIRECT;
                        basic = B43_SHM_SH_CCKBASIC;
                        offset = b43_plcp_get_ratecode_cck(rate->hw_value);
                        offset &= 0xF;
                } else {
                        direct = B43_SHM_SH_OFDMDIRECT;
                        basic = B43_SHM_SH_OFDMBASIC;
                        offset = b43_plcp_get_ratecode_ofdm(rate->hw_value);
                        offset &= 0xF;
                }

                rate = ieee80211_get_response_rate(sband, brates, rate->bitrate);

                if (b43_is_cck_rate(rate->hw_value)) {
                        basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value);
                        basic_offset &= 0xF;
                } else {
                        basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value);
                        basic_offset &= 0xF;
                }

                /*
                 * Get the pointer that we need to point to
                 * from the direct map
                 */
                rateptr = b43_shm_read16(dev, B43_SHM_SHARED,
                                         direct + 2 * basic_offset);
                /* and write it to the basic map */
                b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset,
                                rateptr);
        }
}

static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
                                    struct ieee80211_vif *vif,
                                    struct ieee80211_bss_conf *conf,
                                    u32 changed)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;

        mutex_lock(&wl->mutex);

        dev = wl->current_dev;
        if (!dev || b43_status(dev) < B43_STAT_STARTED)
                goto out_unlock_mutex;

        B43_WARN_ON(wl->vif != vif);

        if (changed & BSS_CHANGED_BSSID) {
                if (conf->bssid)
                        memcpy(wl->bssid, conf->bssid, ETH_ALEN);
                else
                        memset(wl->bssid, 0, ETH_ALEN);
        }

        if (b43_status(dev) >= B43_STAT_INITIALIZED) {
                if (changed & BSS_CHANGED_BEACON &&
                    (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
                     b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
                     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
                        b43_update_templates(wl);

                if (changed & BSS_CHANGED_BSSID)
                        b43_write_mac_bssid_templates(dev);
        }

        b43_mac_suspend(dev);

        /* Update templates for AP/mesh mode. */
        if (changed & BSS_CHANGED_BEACON_INT &&
            (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
             b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
             b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
                b43_set_beacon_int(dev, conf->beacon_int);

        if (changed & BSS_CHANGED_BASIC_RATES)
                b43_update_basic_rates(dev, conf->basic_rates);

        if (changed & BSS_CHANGED_ERP_SLOT) {
                if (conf->use_short_slot)
                        b43_short_slot_timing_enable(dev);
                else
                        b43_short_slot_timing_disable(dev);
        }

        b43_mac_enable(dev);
out_unlock_mutex:
        mutex_unlock(&wl->mutex);
}

static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
                          struct ieee80211_vif *vif, struct ieee80211_sta *sta,
                          struct ieee80211_key_conf *key)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        u8 algorithm;
        u8 index;
        int err;
        static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };

        if (modparam_nohwcrypt)
                return -ENOSPC; /* User disabled HW-crypto */

        mutex_lock(&wl->mutex);

        dev = wl->current_dev;
        err = -ENODEV;
        if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
                goto out_unlock;

        if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
                /* We don't have firmware for the crypto engine.
                 * Must use software-crypto. */
                err = -EOPNOTSUPP;
                goto out_unlock;
        }

        err = -EINVAL;
        switch (key->alg) {
        case ALG_WEP:
                if (key->keylen == WLAN_KEY_LEN_WEP40)
                        algorithm = B43_SEC_ALGO_WEP40;
                else
                        algorithm = B43_SEC_ALGO_WEP104;
                break;
        case ALG_TKIP:
                algorithm = B43_SEC_ALGO_TKIP;
                break;
        case ALG_CCMP:
                algorithm = B43_SEC_ALGO_AES;
                break;
        default:
                B43_WARN_ON(1);
                goto out_unlock;
        }
        index = (u8) (key->keyidx);
        if (index > 3)
                goto out_unlock;

        switch (cmd) {
        case SET_KEY:
                if (algorithm == B43_SEC_ALGO_TKIP &&
                    (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE) ||
                    !modparam_hwtkip)) {
                        /* We support only pairwise key */
                        err = -EOPNOTSUPP;
                        goto out_unlock;
                }

                if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
                        if (WARN_ON(!sta)) {
                                err = -EOPNOTSUPP;
                                goto out_unlock;
                        }
                        /* Pairwise key with an assigned MAC address. */
                        err = b43_key_write(dev, -1, algorithm,
                                            key->key, key->keylen,
                                            sta->addr, key);
                } else {
                        /* Group key */
                        err = b43_key_write(dev, index, algorithm,
                                            key->key, key->keylen, NULL, key);
                }
                if (err)
                        goto out_unlock;

                if (algorithm == B43_SEC_ALGO_WEP40 ||
                    algorithm == B43_SEC_ALGO_WEP104) {
                        b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
                } else {
                        b43_hf_write(dev,
                                     b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
                }
                key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
                if (algorithm == B43_SEC_ALGO_TKIP)
                        key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
                break;
        case DISABLE_KEY: {
                err = b43_key_clear(dev, key->hw_key_idx);
                if (err)
                        goto out_unlock;
                break;
        }
        default:
                B43_WARN_ON(1);
        }

out_unlock:
        if (!err) {
                b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
                       "mac: %pM\n",
                       cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
                       sta ? sta->addr : bcast_addr);
                b43_dump_keymemory(dev);
        }
        mutex_unlock(&wl->mutex);

        return err;
}

static void b43_op_configure_filter(struct ieee80211_hw *hw,
                                    unsigned int changed, unsigned int *fflags,
                                    u64 multicast)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (!dev) {
                *fflags = 0;
                goto out_unlock;
        }

        *fflags &= FIF_PROMISC_IN_BSS |
                  FIF_ALLMULTI |
                  FIF_FCSFAIL |
                  FIF_PLCPFAIL |
                  FIF_CONTROL |
                  FIF_OTHER_BSS |
                  FIF_BCN_PRBRESP_PROMISC;

        changed &= FIF_PROMISC_IN_BSS |
                   FIF_ALLMULTI |
                   FIF_FCSFAIL |
                   FIF_PLCPFAIL |
                   FIF_CONTROL |
                   FIF_OTHER_BSS |
                   FIF_BCN_PRBRESP_PROMISC;

        wl->filter_flags = *fflags;

        if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
                b43_adjust_opmode(dev);

out_unlock:
        mutex_unlock(&wl->mutex);
}

/* Locking: wl->mutex
 * Returns the current dev. This might be different from the passed in dev,
 * because the core might be gone away while we unlocked the mutex. */
static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;
        struct b43_wldev *orig_dev;
        u32 mask;

redo:
        if (!dev || b43_status(dev) < B43_STAT_STARTED)
                return dev;

        /* Cancel work. Unlock to avoid deadlocks. */
        mutex_unlock(&wl->mutex);
        cancel_delayed_work_sync(&dev->periodic_work);
        cancel_work_sync(&wl->tx_work);
        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (!dev || b43_status(dev) < B43_STAT_STARTED) {
                /* Whoops, aliens ate up the device while we were unlocked. */
                return dev;
        }

        /* Disable interrupts on the device. */
        b43_set_status(dev, B43_STAT_INITIALIZED);
        if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
                /* wl->mutex is locked. That is enough. */
                b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
                b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
        } else {
                spin_lock_irq(&wl->hardirq_lock);
                b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
                b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
                spin_unlock_irq(&wl->hardirq_lock);
        }
        /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
        orig_dev = dev;
        mutex_unlock(&wl->mutex);
        if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
                b43_sdio_free_irq(dev);
        } else {
                synchronize_irq(dev->dev->irq);
                free_irq(dev->dev->irq, dev);
        }
        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (!dev)
                return dev;
        if (dev != orig_dev) {
                if (b43_status(dev) >= B43_STAT_STARTED)
                        goto redo;
                return dev;
        }
        mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
        B43_WARN_ON(mask != 0xFFFFFFFF && mask);

        /* Drain the TX queue */
        while (skb_queue_len(&wl->tx_queue))
                dev_kfree_skb(skb_dequeue(&wl->tx_queue));

        b43_mac_suspend(dev);
        b43_leds_exit(dev);
        b43dbg(wl, "Wireless interface stopped\n");

        return dev;
}

/* Locking: wl->mutex */
static int b43_wireless_core_start(struct b43_wldev *dev)
{
        int err;

        B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);

        drain_txstatus_queue(dev);
        if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
                err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
                if (err) {
                        b43err(dev->wl, "Cannot request SDIO IRQ\n");
                        goto out;
                }
        } else {
                err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
                                           b43_interrupt_thread_handler,
                                           IRQF_SHARED, KBUILD_MODNAME, dev);
                if (err) {
                        b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
                        goto out;
                }
        }

        /* We are ready to run. */
        b43_set_status(dev, B43_STAT_STARTED);

        /* Start data flow (TX/RX). */
        b43_mac_enable(dev);
        b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);

        /* Start maintainance work */
        b43_periodic_tasks_setup(dev);

        b43_leds_init(dev);

        b43dbg(dev->wl, "Wireless interface started\n");
out:
        return err;
}

/* Get PHY and RADIO versioning numbers */
static int b43_phy_versioning(struct b43_wldev *dev)
{
        struct b43_phy *phy = &dev->phy;
        u32 tmp;
        u8 analog_type;
        u8 phy_type;
        u8 phy_rev;
        u16 radio_manuf;
        u16 radio_ver;
        u16 radio_rev;
        int unsupported = 0;

        /* Get PHY versioning */
        tmp = b43_read16(dev, B43_MMIO_PHY_VER);
        analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
        phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
        phy_rev = (tmp & B43_PHYVER_VERSION);
        switch (phy_type) {
        case B43_PHYTYPE_A:
                if (phy_rev >= 4)
                        unsupported = 1;
                break;
        case B43_PHYTYPE_B:
                if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
                    && phy_rev != 7)
                        unsupported = 1;
                break;
        case B43_PHYTYPE_G:
                if (phy_rev > 9)
                        unsupported = 1;
                break;
#ifdef CONFIG_B43_NPHY
        case B43_PHYTYPE_N:
                if (phy_rev > 4)
                        unsupported = 1;
                break;
#endif
#ifdef CONFIG_B43_PHY_LP
        case B43_PHYTYPE_LP:
                if (phy_rev > 2)
                        unsupported = 1;
                break;
#endif
        default:
                unsupported = 1;
        };
        if (unsupported) {
                b43err(dev->wl, "FOUND UNSUPPORTED PHY "
                       "(Analog %u, Type %u, Revision %u)\n",
                       analog_type, phy_type, phy_rev);
                return -EOPNOTSUPP;
        }
        b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
               analog_type, phy_type, phy_rev);

        /* Get RADIO versioning */
        if (dev->dev->bus->chip_id == 0x4317) {
                if (dev->dev->bus->chip_rev == 0)
                        tmp = 0x3205017F;
                else if (dev->dev->bus->chip_rev == 1)
                        tmp = 0x4205017F;
                else
                        tmp = 0x5205017F;
        } else {
                b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
                tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
                b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
                tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
        }
        radio_manuf = (tmp & 0x00000FFF);
        radio_ver = (tmp & 0x0FFFF000) >> 12;
        radio_rev = (tmp & 0xF0000000) >> 28;
        if (radio_manuf != 0x17F /* Broadcom */)
                unsupported = 1;
        switch (phy_type) {
        case B43_PHYTYPE_A:
                if (radio_ver != 0x2060)
                        unsupported = 1;
                if (radio_rev != 1)
                        unsupported = 1;
                if (radio_manuf != 0x17F)
                        unsupported = 1;
                break;
        case B43_PHYTYPE_B:
                if ((radio_ver & 0xFFF0) != 0x2050)
                        unsupported = 1;
                break;
        case B43_PHYTYPE_G:
                if (radio_ver != 0x2050)
                        unsupported = 1;
                break;
        case B43_PHYTYPE_N:
                if (radio_ver != 0x2055 && radio_ver != 0x2056)
                        unsupported = 1;
                break;
        case B43_PHYTYPE_LP:
                if (radio_ver != 0x2062 && radio_ver != 0x2063)
                        unsupported = 1;
                break;
        default:
                B43_WARN_ON(1);
        }
        if (unsupported) {
                b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
                       "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
                       radio_manuf, radio_ver, radio_rev);
                return -EOPNOTSUPP;
        }
        b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
               radio_manuf, radio_ver, radio_rev);

        phy->radio_manuf = radio_manuf;
        phy->radio_ver = radio_ver;
        phy->radio_rev = radio_rev;

        phy->analog = analog_type;
        phy->type = phy_type;
        phy->rev = phy_rev;

        return 0;
}

static void setup_struct_phy_for_init(struct b43_wldev *dev,
                                      struct b43_phy *phy)
{
        phy->hardware_power_control = !!modparam_hwpctl;
        phy->next_txpwr_check_time = jiffies;
        /* PHY TX errors counter. */
        atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);

#if B43_DEBUG
        phy->phy_locked = 0;
        phy->radio_locked = 0;
#endif
}

static void setup_struct_wldev_for_init(struct b43_wldev *dev)
{
        dev->dfq_valid = 0;

        /* Assume the radio is enabled. If it's not enabled, the state will
         * immediately get fixed on the first periodic work run. */
        dev->radio_hw_enable = 1;

        /* Stats */
        memset(&dev->stats, 0, sizeof(dev->stats));

        setup_struct_phy_for_init(dev, &dev->phy);

        /* IRQ related flags */
        dev->irq_reason = 0;
        memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
        dev->irq_mask = B43_IRQ_MASKTEMPLATE;
        if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
                dev->irq_mask &= ~B43_IRQ_PHY_TXERR;

        dev->mac_suspended = 1;

        /* Noise calculation context */
        memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
}

static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
{
        struct ssb_sprom *sprom = &dev->dev->bus->sprom;
        u64 hf;

        if (!modparam_btcoex)
                return;
        if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
                return;
        if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
                return;

        hf = b43_hf_read(dev);
        if (sprom->boardflags_lo & B43_BFL_BTCMOD)
                hf |= B43_HF_BTCOEXALT;
        else
                hf |= B43_HF_BTCOEX;
        b43_hf_write(dev, hf);
}

static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
{
        if (!modparam_btcoex)
                return;
        //TODO
}

static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
{
#ifdef CONFIG_SSB_DRIVER_PCICORE
        struct ssb_bus *bus = dev->dev->bus;
        u32 tmp;

        if (bus->pcicore.dev &&
            bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
            bus->pcicore.dev->id.revision <= 5) {
                /* IMCFGLO timeouts workaround. */
                tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
                switch (bus->bustype) {
                case SSB_BUSTYPE_PCI:
                case SSB_BUSTYPE_PCMCIA:
                        tmp &= ~SSB_IMCFGLO_REQTO;
                        tmp &= ~SSB_IMCFGLO_SERTO;
                        tmp |= 0x32;
                        break;
                case SSB_BUSTYPE_SSB:
                        tmp &= ~SSB_IMCFGLO_REQTO;
                        tmp &= ~SSB_IMCFGLO_SERTO;
                        tmp |= 0x53;
                        break;
                default:
                        break;
                }
                ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
        }
#endif /* CONFIG_SSB_DRIVER_PCICORE */
}

static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
{
        u16 pu_delay;

        /* The time value is in microseconds. */
        if (dev->phy.type == B43_PHYTYPE_A)
                pu_delay = 3700;
        else
                pu_delay = 1050;
        if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
                pu_delay = 500;
        if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
                pu_delay = max(pu_delay, (u16)2400);

        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay);
}

/* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
static void b43_set_pretbtt(struct b43_wldev *dev)
{
        u16 pretbtt;

        /* The time value is in microseconds. */
        if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) {
                pretbtt = 2;
        } else {
                if (dev->phy.type == B43_PHYTYPE_A)
                        pretbtt = 120;
                else
                        pretbtt = 250;
        }
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt);
        b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt);
}

/* Shutdown a wireless core */
/* Locking: wl->mutex */
static void b43_wireless_core_exit(struct b43_wldev *dev)
{
        u32 macctl;

        B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED);
        if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
                return;
        b43_set_status(dev, B43_STAT_UNINIT);

        /* Stop the microcode PSM. */
        macctl = b43_read32(dev, B43_MMIO_MACCTL);
        macctl &= ~B43_MACCTL_PSM_RUN;
        macctl |= B43_MACCTL_PSM_JMP0;
        b43_write32(dev, B43_MMIO_MACCTL, macctl);

        b43_dma_free(dev);
        b43_pio_free(dev);
        b43_chip_exit(dev);
        dev->phy.ops->switch_analog(dev, 0);
        if (dev->wl->current_beacon) {
                dev_kfree_skb_any(dev->wl->current_beacon);
                dev->wl->current_beacon = NULL;
        }

        ssb_device_disable(dev->dev, 0);
        ssb_bus_may_powerdown(dev->dev->bus);
}

/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
        struct ssb_bus *bus = dev->dev->bus;
        struct ssb_sprom *sprom = &bus->sprom;
        struct b43_phy *phy = &dev->phy;
        int err;
        u64 hf;
        u32 tmp;

        B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);

        err = ssb_bus_powerup(bus, 0);
        if (err)
                goto out;
        if (!ssb_device_is_enabled(dev->dev)) {
                tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
                b43_wireless_core_reset(dev, tmp);
        }

        /* Reset all data structures. */
        setup_struct_wldev_for_init(dev);
        phy->ops->prepare_structs(dev);

        /* Enable IRQ routing to this device. */
        ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);

        b43_imcfglo_timeouts_workaround(dev);
        b43_bluetooth_coext_disable(dev);
        if (phy->ops->prepare_hardware) {
                err = phy->ops->prepare_hardware(dev);
                if (err)
                        goto err_busdown;
        }
        err = b43_chip_init(dev);
        if (err)
                goto err_busdown;
        b43_shm_write16(dev, B43_SHM_SHARED,
                        B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
        hf = b43_hf_read(dev);
        if (phy->type == B43_PHYTYPE_G) {
                hf |= B43_HF_SYMW;
                if (phy->rev == 1)
                        hf |= B43_HF_GDCW;
                if (sprom->boardflags_lo & B43_BFL_PACTRL)
                        hf |= B43_HF_OFDMPABOOST;
        }
        if (phy->radio_ver == 0x2050) {
                if (phy->radio_rev == 6)
                        hf |= B43_HF_4318TSSI;
                if (phy->radio_rev < 6)
                        hf |= B43_HF_VCORECALC;
        }
        if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
                hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
#ifdef CONFIG_SSB_DRIVER_PCICORE
        if ((bus->bustype == SSB_BUSTYPE_PCI) &&
            (bus->pcicore.dev->id.revision <= 10))
                hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */
#endif
        hf &= ~B43_HF_SKCFPUP;
        b43_hf_write(dev, hf);

        b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
                             B43_DEFAULT_LONG_RETRY_LIMIT);
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);

        /* Disable sending probe responses from firmware.
         * Setting the MaxTime to one usec will always trigger
         * a timeout, so we never send any probe resp.
         * A timeout of zero is infinite. */
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);

        b43_rate_memory_init(dev);
        b43_set_phytxctl_defaults(dev);

        /* Minimum Contention Window */
        if (phy->type == B43_PHYTYPE_B) {
                b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
        } else {
                b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
        }
        /* Maximum Contention Window */
        b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);

        if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
            (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
            modparam_pio) {
                dev->__using_pio_transfers = 1;
                err = b43_pio_init(dev);
        } else {
                dev->__using_pio_transfers = 0;
                err = b43_dma_init(dev);
        }
        if (err)
                goto err_chip_exit;
        b43_qos_init(dev);
        b43_set_synth_pu_delay(dev, 1);
        b43_bluetooth_coext_enable(dev);

        ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
        b43_upload_card_macaddress(dev);
        b43_security_init(dev);

        ieee80211_wake_queues(dev->wl->hw);

        ieee80211_wake_queues(dev->wl->hw);

        b43_set_status(dev, B43_STAT_INITIALIZED);

out:
        return err;

err_chip_exit:
        b43_chip_exit(dev);
err_busdown:
        ssb_bus_may_powerdown(bus);
        B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
        return err;
}

static int b43_op_add_interface(struct ieee80211_hw *hw,
                                struct ieee80211_vif *vif)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;
        int err = -EOPNOTSUPP;

        /* TODO: allow WDS/AP devices to coexist */

        if (vif->type != NL80211_IFTYPE_AP &&
            vif->type != NL80211_IFTYPE_MESH_POINT &&
            vif->type != NL80211_IFTYPE_STATION &&
            vif->type != NL80211_IFTYPE_WDS &&
            vif->type != NL80211_IFTYPE_ADHOC)
                return -EOPNOTSUPP;

        mutex_lock(&wl->mutex);
        if (wl->operating)
                goto out_mutex_unlock;

        b43dbg(wl, "Adding Interface type %d\n", vif->type);

        dev = wl->current_dev;
        wl->operating = 1;
        wl->vif = vif;
        wl->if_type = vif->type;
        memcpy(wl->mac_addr, vif->addr, ETH_ALEN);

        b43_adjust_opmode(dev);
        b43_set_pretbtt(dev);
        b43_set_synth_pu_delay(dev, 0);
        b43_upload_card_macaddress(dev);

        err = 0;
 out_mutex_unlock:
        mutex_unlock(&wl->mutex);

        return err;
}

static void b43_op_remove_interface(struct ieee80211_hw *hw,
                                    struct ieee80211_vif *vif)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev = wl->current_dev;

        b43dbg(wl, "Removing Interface type %d\n", vif->type);

        mutex_lock(&wl->mutex);

        B43_WARN_ON(!wl->operating);
        B43_WARN_ON(wl->vif != vif);
        wl->vif = NULL;

        wl->operating = 0;

        b43_adjust_opmode(dev);
        memset(wl->mac_addr, 0, ETH_ALEN);
        b43_upload_card_macaddress(dev);

        mutex_unlock(&wl->mutex);
}

static int b43_op_start(struct ieee80211_hw *hw)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev = wl->current_dev;
        int did_init = 0;
        int err = 0;

        /* Kill all old instance specific information to make sure
         * the card won't use it in the short timeframe between start
         * and mac80211 reconfiguring it. */
        memset(wl->bssid, 0, ETH_ALEN);
        memset(wl->mac_addr, 0, ETH_ALEN);
        wl->filter_flags = 0;
        wl->radiotap_enabled = 0;
        b43_qos_clear(wl);
        wl->beacon0_uploaded = 0;
        wl->beacon1_uploaded = 0;
        wl->beacon_templates_virgin = 1;
        wl->radio_enabled = 1;

        mutex_lock(&wl->mutex);

        if (b43_status(dev) < B43_STAT_INITIALIZED) {
                err = b43_wireless_core_init(dev);
                if (err)
                        goto out_mutex_unlock;
                did_init = 1;
        }

        if (b43_status(dev) < B43_STAT_STARTED) {
                err = b43_wireless_core_start(dev);
                if (err) {
                        if (did_init)
                                b43_wireless_core_exit(dev);
                        goto out_mutex_unlock;
                }
        }

        /* XXX: only do if device doesn't support rfkill irq */
        wiphy_rfkill_start_polling(hw->wiphy);

 out_mutex_unlock:
        mutex_unlock(&wl->mutex);

        return err;
}

static void b43_op_stop(struct ieee80211_hw *hw)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev = wl->current_dev;

        cancel_work_sync(&(wl->beacon_update_trigger));

        mutex_lock(&wl->mutex);
        if (b43_status(dev) >= B43_STAT_STARTED) {
                dev = b43_wireless_core_stop(dev);
                if (!dev)
                        goto out_unlock;
        }
        b43_wireless_core_exit(dev);
        wl->radio_enabled = 0;

out_unlock:
        mutex_unlock(&wl->mutex);

        cancel_work_sync(&(wl->txpower_adjust_work));
}

static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
                                 struct ieee80211_sta *sta, bool set)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);

        /* FIXME: add locking */
        b43_update_templates(wl);

        return 0;
}

static void b43_op_sta_notify(struct ieee80211_hw *hw,
                              struct ieee80211_vif *vif,
                              enum sta_notify_cmd notify_cmd,
                              struct ieee80211_sta *sta)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);

        B43_WARN_ON(!vif || wl->vif != vif);
}

static void b43_op_sw_scan_start_notifier(struct ieee80211_hw *hw)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) {
                /* Disable CFP update during scan on other channels. */
                b43_hf_write(dev, b43_hf_read(dev) | B43_HF_SKCFPUP);
        }
        mutex_unlock(&wl->mutex);
}

static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw)
{
        struct b43_wl *wl = hw_to_b43_wl(hw);
        struct b43_wldev *dev;

        mutex_lock(&wl->mutex);
        dev = wl->current_dev;
        if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) {
                /* Re-enable CFP update. */
                b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_SKCFPUP);
        }
        mutex_unlock(&wl->mutex);
}

static const struct ieee80211_ops b43_hw_ops = {
        .tx                     = b43_op_tx,
        .conf_tx                = b43_op_conf_tx,
        .add_interface          = b43_op_add_interface,
        .remove_interface       = b43_op_remove_interface,
        .config                 = b43_op_config,
        .bss_info_changed       = b43_op_bss_info_changed,
        .configure_filter       = b43_op_configure_filter,
        .set_key                = b43_op_set_key,
        .update_tkip_key        = b43_op_update_tkip_key,
        .get_stats              = b43_op_get_stats,
        .get_tx_stats           = b43_op_get_tx_stats,
        .get_tsf                = b43_op_get_tsf,
        .set_tsf                = b43_op_set_tsf,
        .start                  = b43_op_start,
        .stop                   = b43_op_stop,
        .set_tim                = b43_op_beacon_set_tim,
        .sta_notify             = b43_op_sta_notify,
        .sw_scan_start          = b43_op_sw_scan_start_notifier,
        .sw_scan_complete       = b43_op_sw_scan_complete_notifier,
        .rfkill_poll            = b43_rfkill_poll,
};

/* Hard-reset the chip. Do not call this directly.
 * Use b43_controller_restart()
 */
static void b43_chip_reset(struct work_struct *work)
{
        struct b43_wldev *dev =
            container_of(work, struct b43_wldev, restart_work);
        struct b43_wl *wl = dev->wl;
        int err = 0;
        int prev_status;

        mutex_lock(&wl->mutex);

        prev_status = b43_status(dev);
        /* Bring the device down... */
        if (prev_status >= B43_STAT_STARTED) {
                dev = b43_wireless_core_stop(dev);
                if (!dev) {
                        err = -ENODEV;
                        goto out;
                }
        }
        if (prev_status >= B43_STAT_INITIALIZED)
                b43_wireless_core_exit(dev);

        /* ...and up again. */
        if (prev_status >= B43_STAT_INITIALIZED) {
                err = b43_wireless_core_init(dev);
                if (err)
                        goto out;
        }
        if (prev_status >= B43_STAT_STARTED) {
                err = b43_wireless_core_start(dev);
                if (err) {
                        b43_wireless_core_exit(dev);
                        goto out;
                }
        }
out:
        if (err)
                wl->current_dev = NULL; /* Failed to init the dev. */
        mutex_unlock(&wl->mutex);
        if (err)
                b43err(wl, "Controller restart FAILED\n");
        else
                b43info(wl, "Controller restarted\n");
}

static int b43_setup_bands(struct b43_wldev *dev,
                           bool have_2ghz_phy, bool have_5ghz_phy)
{
        struct ieee80211_hw *hw = dev->wl->hw;

        if (have_2ghz_phy)
                hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
        if (dev->phy.type == B43_PHYTYPE_N) {
                if (have_5ghz_phy)
                        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
        } else {
                if (have_5ghz_phy)
                        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
        }

        dev->phy.supports_2ghz = have_2ghz_phy;
        dev->phy.supports_5ghz = have_5ghz_phy;

        return 0;
}

static void b43_wireless_core_detach(struct b43_wldev *dev)
{
        /* We release firmware that late to not be required to re-request
         * is all the time when we reinit the core. */
        b43_release_firmware(dev);
        b43_phy_free(dev);
}

static int b43_wireless_core_attach(struct b43_wldev *dev)
{
        struct b43_wl *wl = dev->wl;
        struct ssb_bus *bus = dev->dev->bus;
        struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
        int err;
        bool have_2ghz_phy = 0, have_5ghz_phy = 0;
        u32 tmp;

        /* Do NOT do any device initialization here.
         * Do it in wireless_core_init() instead.
         * This function is for gathering basic information about the HW, only.
         * Also some structs may be set up here. But most likely you want to have
         * that in core_init(), too.
         */

        err = ssb_bus_powerup(bus, 0);
        if (err) {
                b43err(wl, "Bus powerup failed\n");
                goto out;
        }
        /* Get the PHY type. */
        if (dev->dev->id.revision >= 5) {
                u32 tmshigh;

                tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
                have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
                have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
        } else
                B43_WARN_ON(1);

        dev->phy.gmode = have_2ghz_phy;
        dev->phy.radio_on = 1;
        tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
        b43_wireless_core_reset(dev, tmp);

        err = b43_phy_versioning(dev);
        if (err)
                goto err_powerdown;
        /* Check if this device supports multiband. */
        if (!pdev ||
            (pdev->device != 0x4312 &&
             pdev->device != 0x4319 && pdev->device != 0x4324)) {
                /* No multiband support. */
                have_2ghz_phy = 0;
                have_5ghz_phy = 0;
                switch (dev->phy.type) {
                case B43_PHYTYPE_A:
                        have_5ghz_phy = 1;
                        break;
                case B43_PHYTYPE_LP: //FIXME not always!
#if 0 //FIXME enabling 5GHz causes a NULL pointer dereference
                        have_5ghz_phy = 1;
#endif
                case B43_PHYTYPE_G:
                case B43_PHYTYPE_N:
                        have_2ghz_phy = 1;
                        break;
                default:
                        B43_WARN_ON(1);
                }
        }
        if (dev->phy.type == B43_PHYTYPE_A) {
                /* FIXME */
                b43err(wl, "IEEE 802.11a devices are unsupported\n");
                err = -EOPNOTSUPP;
                goto err_powerdown;
        }
        if (1 /* disable A-PHY */) {
                /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
                if (dev->phy.type != B43_PHYTYPE_N &&
                    dev->phy.type != B43_PHYTYPE_LP) {
                        have_2ghz_phy = 1;
                        have_5ghz_phy = 0;
                }
        }

        err = b43_phy_allocate(dev);
        if (err)
                goto err_powerdown;

        dev->phy.gmode = have_2ghz_phy;
        tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
        b43_wireless_core_reset(dev, tmp);

        err = b43_validate_chipaccess(dev);
        if (err)
                goto err_phy_free;
        err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
        if (err)
                goto err_phy_free;

        /* Now set some default "current_dev" */
        if (!wl->current_dev)
                wl->current_dev = dev;
        INIT_WORK(&dev->restart_work, b43_chip_reset);

        dev->phy.ops->switch_analog(dev, 0);
        ssb_device_disable(dev->dev, 0);
        ssb_bus_may_powerdown(bus);

out:
        return err;

err_phy_free:
        b43_phy_free(dev);
err_powerdown:
        ssb_bus_may_powerdown(bus);
        return err;
}

static void b43_one_core_detach(struct ssb_device *dev)
{
        struct b43_wldev *wldev;
        struct b43_wl *wl;

        /* Do not cancel ieee80211-workqueue based work here.
         * See comment in b43_remove(). */

        wldev = ssb_get_drvdata(dev);
        wl = wldev->wl;
        b43_debugfs_remove_device(wldev);
        b43_wireless_core_detach(wldev);
        list_del(&wldev->list);
        wl->nr_devs--;
        ssb_set_drvdata(dev, NULL);
        kfree(wldev);
}

static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
{
        struct b43_wldev *wldev;
        struct pci_dev *pdev;
        int err = -ENOMEM;

        if (!list_empty(&wl->devlist)) {
                /* We are not the first core on this chip. */
                pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
                /* Only special chips support more than one wireless
                 * core, although some of the other chips have more than
                 * one wireless core as well. Check for this and
                 * bail out early.
                 */
                if (!pdev ||
                    ((pdev->device != 0x4321) &&
                     (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
                        b43dbg(wl, "Ignoring unconnected 802.11 core\n");
                        return -ENODEV;
                }
        }

        wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
        if (!wldev)
                goto out;

        wldev->dev = dev;
        wldev->wl = wl;
        b43_set_status(wldev, B43_STAT_UNINIT);
        wldev->bad_frames_preempt = modparam_bad_frames_preempt;
        INIT_LIST_HEAD(&wldev->list);

        err = b43_wireless_core_attach(wldev);
        if (err)
                goto err_kfree_wldev;

        list_add(&wldev->list, &wl->devlist);
        wl->nr_devs++;
        ssb_set_drvdata(dev, wldev);
        b43_debugfs_add_device(wldev);

      out:
        return err;

      err_kfree_wldev:
        kfree(wldev);
        return err;
}

#define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice)         ( \
        (pdev->vendor == PCI_VENDOR_ID_##_vendor) &&                    \
        (pdev->device == _device) &&                                    \
        (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) &&       \
        (pdev->subsystem_device == _subdevice)                          )

static void b43_sprom_fixup(struct ssb_bus *bus)
{
        struct pci_dev *pdev;

        /* boardflags workarounds */
        if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
            bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
                bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
        if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
            bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
                bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
        if (bus->bustype == SSB_BUSTYPE_PCI) {
                pdev = bus->host_pci;
                if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
                    IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
                    IS_PDEV(pdev, BROADCOM, 0x4320,      HP, 0x12f8) ||
                    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
                    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
                    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
                    IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
                        bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
        }
}

static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
{
        struct ieee80211_hw *hw = wl->hw;

        ssb_set_devtypedata(dev, NULL);
        ieee80211_free_hw(hw);
}

static int b43_wireless_init(struct ssb_device *dev)
{
        struct ssb_sprom *sprom = &dev->bus->sprom;
        struct ieee80211_hw *hw;
        struct b43_wl *wl;
        int err = -ENOMEM;

        b43_sprom_fixup(dev->bus);

        hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
        if (!hw) {
                b43err(NULL, "Could not allocate ieee80211 device\n");
                goto out;
        }
        wl = hw_to_b43_wl(hw);

        /* fill hw info */
        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
                    IEEE80211_HW_SIGNAL_DBM |
                    IEEE80211_HW_NOISE_DBM;

        hw->wiphy->interface_modes =
                BIT(NL80211_IFTYPE_AP) |
                BIT(NL80211_IFTYPE_MESH_POINT) |
                BIT(NL80211_IFTYPE_STATION) |
                BIT(NL80211_IFTYPE_WDS) |
                BIT(NL80211_IFTYPE_ADHOC);

        hw->queues = modparam_qos ? 4 : 1;
        wl->mac80211_initially_registered_queues = hw->queues;
        hw->max_rates = 2;
        SET_IEEE80211_DEV(hw, dev->dev);
        if (is_valid_ether_addr(sprom->et1mac))
                SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
        else
                SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);

        /* Initialize struct b43_wl */
        wl->hw = hw;
        mutex_init(&wl->mutex);
        spin_lock_init(&wl->hardirq_lock);
        INIT_LIST_HEAD(&wl->devlist);
        INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
        INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
        INIT_WORK(&wl->tx_work, b43_tx_work);
        skb_queue_head_init(&wl->tx_queue);

        ssb_set_devtypedata(dev, wl);
        b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n",
                dev->bus->chip_id, dev->id.revision);
        err = 0;
out:
        return err;
}

static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
{
        struct b43_wl *wl;
        int err;
        int first = 0;

        wl = ssb_get_devtypedata(dev);
        if (!wl) {
                /* Probing the first core. Must setup common struct b43_wl */
                first = 1;
                err = b43_wireless_init(dev);
                if (err)
                        goto out;
                wl = ssb_get_devtypedata(dev);
                B43_WARN_ON(!wl);
        }
        err = b43_one_core_attach(dev, wl);
        if (err)
                goto err_wireless_exit;

        if (first) {
                err = ieee80211_register_hw(wl->hw);
                if (err)
                        goto err_one_core_detach;
                b43_leds_register(wl->current_dev);
                b43_rng_init(wl);
        }

      out:
        return err;

      err_one_core_detach:
        b43_one_core_detach(dev);
      err_wireless_exit:
        if (first)
                b43_wireless_exit(dev, wl);
        return err;
}

static void b43_remove(struct ssb_device *dev)
{
        struct b43_wl *wl = ssb_get_devtypedata(dev);
        struct b43_wldev *wldev = ssb_get_drvdata(dev);

        /* We must cancel any work here before unregistering from ieee80211,
         * as the ieee80211 unreg will destroy the workqueue. */
        cancel_work_sync(&wldev->restart_work);

        B43_WARN_ON(!wl);
        if (wl->current_dev == wldev) {
                /* Restore the queues count before unregistering, because firmware detect
                 * might have modified it. Restoring is important, so the networking
                 * stack can properly free resources. */
                wl->hw->queues = wl->mac80211_initially_registered_queues;
                b43_leds_stop(wldev);
                ieee80211_unregister_hw(wl->hw);
        }

        b43_one_core_detach(dev);

        if (list_empty(&wl->devlist)) {
                b43_rng_exit(wl);
                b43_leds_unregister(wl);
                /* Last core on the chip unregistered.
                 * We can destroy common struct b43_wl.
                 */
                b43_wireless_exit(dev, wl);
        }
}

/* Perform a hardware reset. This can be called from any context. */
void b43_controller_restart(struct b43_wldev *dev, const char *reason)
{
        /* Must avoid requeueing, if we are in shutdown. */
        if (b43_status(dev) < B43_STAT_INITIALIZED)
                return;
        b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
        ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}

static struct ssb_driver b43_ssb_driver = {
        .name           = KBUILD_MODNAME,
        .id_table       = b43_ssb_tbl,
        .probe          = b43_probe,
        .remove         = b43_remove,
};

static void b43_print_driverinfo(void)
{
        const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
                   *feat_leds = "", *feat_sdio = "";

#ifdef CONFIG_B43_PCI_AUTOSELECT
        feat_pci = "P";
#endif
#ifdef CONFIG_B43_PCMCIA
        feat_pcmcia = "M";
#endif
#ifdef CONFIG_B43_NPHY
        feat_nphy = "N";
#endif
#ifdef CONFIG_B43_LEDS
        feat_leds = "L";
#endif
#ifdef CONFIG_B43_SDIO
        feat_sdio = "S";
#endif
        printk(KERN_INFO "Broadcom 43xx driver loaded "
               "[ Features: %s%s%s%s%s, Firmware-ID: "
               B43_SUPPORTED_FIRMWARE_ID " ]\n",
               feat_pci, feat_pcmcia, feat_nphy,
               feat_leds, feat_sdio);
}

static int __init b43_init(void)
{
        int err;

        b43_debugfs_init();
        err = b43_pcmcia_init();
        if (err)
                goto err_dfs_exit;
        err = b43_sdio_init();
        if (err)
                goto err_pcmcia_exit;
        err = ssb_driver_register(&b43_ssb_driver);
        if (err)
                goto err_sdio_exit;
        b43_print_driverinfo();

        return err;

err_sdio_exit:
        b43_sdio_exit();
err_pcmcia_exit:
        b43_pcmcia_exit();
err_dfs_exit:
        b43_debugfs_exit();
        return err;
}

static void __exit b43_exit(void)
{
        ssb_driver_unregister(&b43_ssb_driver);
        b43_sdio_exit();
        b43_pcmcia_exit();
        b43_debugfs_exit();
}

module_init(b43_init)
module_exit(b43_exit)