SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/ath9k/main.c

   1 /*
   2  * Copyright (c) 2008 Atheros Communications Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/nl80211.h>
  18 #include "ath9k.h"
  19
  20 #define ATH_PCI_VERSION "0.1"
  21
  22 static char *dev_info = "ath9k";
  23
  24 MODULE_AUTHOR("Atheros Communications");
  25 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
  26 MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
  27 MODULE_LICENSE("Dual BSD/GPL");
  28
  29 static int modparam_nohwcrypt;
  30 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  31 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
  32
  33 /* We use the hw_value as an index into our private channel structure */
  34
  35 #define CHAN2G(_freq, _idx)  { \
  36         .center_freq = (_freq), \
  37         .hw_value = (_idx), \
  38         .max_power = 30, \
  39 }
  40
  41 #define CHAN5G(_freq, _idx) { \
  42         .band = IEEE80211_BAND_5GHZ, \
  43         .center_freq = (_freq), \
  44         .hw_value = (_idx), \
  45         .max_power = 30, \
  46 }
  47
  48 /* Some 2 GHz radios are actually tunable on 2312-2732
  49  * on 5 MHz steps, we support the channels which we know
  50  * we have calibration data for all cards though to make
  51  * this static */
  52 static struct ieee80211_channel ath9k_2ghz_chantable[] = {
  53         CHAN2G(2412, 0), /* Channel 1 */
  54         CHAN2G(2417, 1), /* Channel 2 */
  55         CHAN2G(2422, 2), /* Channel 3 */
  56         CHAN2G(2427, 3), /* Channel 4 */
  57         CHAN2G(2432, 4), /* Channel 5 */
  58         CHAN2G(2437, 5), /* Channel 6 */
  59         CHAN2G(2442, 6), /* Channel 7 */
  60         CHAN2G(2447, 7), /* Channel 8 */
  61         CHAN2G(2452, 8), /* Channel 9 */
  62         CHAN2G(2457, 9), /* Channel 10 */
  63         CHAN2G(2462, 10), /* Channel 11 */
  64         CHAN2G(2467, 11), /* Channel 12 */
  65         CHAN2G(2472, 12), /* Channel 13 */
  66         CHAN2G(2484, 13), /* Channel 14 */
  67 };
  68
  69 /* Some 5 GHz radios are actually tunable on XXXX-YYYY
  70  * on 5 MHz steps, we support the channels which we know
  71  * we have calibration data for all cards though to make
  72  * this static */
  73 static struct ieee80211_channel ath9k_5ghz_chantable[] = {
  74         /* _We_ call this UNII 1 */
  75         CHAN5G(5180, 14), /* Channel 36 */
  76         CHAN5G(5200, 15), /* Channel 40 */
  77         CHAN5G(5220, 16), /* Channel 44 */
  78         CHAN5G(5240, 17), /* Channel 48 */
  79         /* _We_ call this UNII 2 */
  80         CHAN5G(5260, 18), /* Channel 52 */
  81         CHAN5G(5280, 19), /* Channel 56 */
  82         CHAN5G(5300, 20), /* Channel 60 */
  83         CHAN5G(5320, 21), /* Channel 64 */
  84         /* _We_ call this "Middle band" */
  85         CHAN5G(5500, 22), /* Channel 100 */
  86         CHAN5G(5520, 23), /* Channel 104 */
  87         CHAN5G(5540, 24), /* Channel 108 */
  88         CHAN5G(5560, 25), /* Channel 112 */
  89         CHAN5G(5580, 26), /* Channel 116 */
  90         CHAN5G(5600, 27), /* Channel 120 */
  91         CHAN5G(5620, 28), /* Channel 124 */
  92         CHAN5G(5640, 29), /* Channel 128 */
  93         CHAN5G(5660, 30), /* Channel 132 */
  94         CHAN5G(5680, 31), /* Channel 136 */
  95         CHAN5G(5700, 32), /* Channel 140 */
  96         /* _We_ call this UNII 3 */
  97         CHAN5G(5745, 33), /* Channel 149 */
  98         CHAN5G(5765, 34), /* Channel 153 */
  99         CHAN5G(5785, 35), /* Channel 157 */
 100         CHAN5G(5805, 36), /* Channel 161 */
 101         CHAN5G(5825, 37), /* Channel 165 */
 102 };
 103
 104 static void ath_cache_conf_rate(struct ath_softc *sc,
 105                                 struct ieee80211_conf *conf)
 106 {
 107         switch (conf->channel->band) {
 108         case IEEE80211_BAND_2GHZ:
 109                 if (conf_is_ht20(conf))
 110                         sc->cur_rate_table =
 111                           sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
 112                 else if (conf_is_ht40_minus(conf))
 113                         sc->cur_rate_table =
 114                           sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
 115                 else if (conf_is_ht40_plus(conf))
 116                         sc->cur_rate_table =
 117                           sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
 118                 else
 119                         sc->cur_rate_table =
 120                           sc->hw_rate_table[ATH9K_MODE_11G];
 121                 break;
 122         case IEEE80211_BAND_5GHZ:
 123                 if (conf_is_ht20(conf))
 124                         sc->cur_rate_table =
 125                           sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
 126                 else if (conf_is_ht40_minus(conf))
 127                         sc->cur_rate_table =
 128                           sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
 129                 else if (conf_is_ht40_plus(conf))
 130                         sc->cur_rate_table =
 131                           sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
 132                 else
 133                         sc->cur_rate_table =
 134                           sc->hw_rate_table[ATH9K_MODE_11A];
 135                 break;
 136         default:
 137                 BUG_ON(1);
 138                 break;
 139         }
 140 }
 141
 142 static void ath_update_txpow(struct ath_softc *sc)
 143 {
 144         struct ath_hw *ah = sc->sc_ah;
 145         u32 txpow;
 146
 147         if (sc->curtxpow != sc->config.txpowlimit) {
 148                 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
 149                 /* read back in case value is clamped */
 150                 ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
 151                 sc->curtxpow = txpow;
 152         }
 153 }
 154
 155 static u8 parse_mpdudensity(u8 mpdudensity)
 156 {
 157         /*
 158          * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
 159          *   0 for no restriction
 160          *   1 for 1/4 us
 161          *   2 for 1/2 us
 162          *   3 for 1 us
 163          *   4 for 2 us
 164          *   5 for 4 us
 165          *   6 for 8 us
 166          *   7 for 16 us
 167          */
 168         switch (mpdudensity) {
 169         case 0:
 170                 return 0;
 171         case 1:
 172         case 2:
 173         case 3:
 174                 /* Our lower layer calculations limit our precision to
 175                    1 microsecond */
 176                 return 1;
 177         case 4:
 178                 return 2;
 179         case 5:
 180                 return 4;
 181         case 6:
 182                 return 8;
 183         case 7:
 184                 return 16;
 185         default:
 186                 return 0;
 187         }
 188 }
 189
 190 static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
 191 {
 192         struct ath_rate_table *rate_table = NULL;
 193         struct ieee80211_supported_band *sband;
 194         struct ieee80211_rate *rate;
 195         int i, maxrates;
 196
 197         switch (band) {
 198         case IEEE80211_BAND_2GHZ:
 199                 rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
 200                 break;
 201         case IEEE80211_BAND_5GHZ:
 202                 rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
 203                 break;
 204         default:
 205                 break;
 206         }
 207
 208         if (rate_table == NULL)
 209                 return;
 210
 211         sband = &sc->sbands[band];
 212         rate = sc->rates[band];
 213
 214         if (rate_table->rate_cnt > ATH_RATE_MAX)
 215                 maxrates = ATH_RATE_MAX;
 216         else
 217                 maxrates = rate_table->rate_cnt;
 218
 219         for (i = 0; i < maxrates; i++) {
 220                 rate[i].bitrate = rate_table->info[i].ratekbps / 100;
 221                 rate[i].hw_value = rate_table->info[i].ratecode;
 222                 if (rate_table->info[i].short_preamble) {
 223                         rate[i].hw_value_short = rate_table->info[i].ratecode |
 224                                 rate_table->info[i].short_preamble;
 225                         rate[i].flags = IEEE80211_RATE_SHORT_PREAMBLE;
 226                 }
 227                 sband->n_bitrates++;
 228
 229                 DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n",
 230                         rate[i].bitrate / 10, rate[i].hw_value);
 231         }
 232 }
 233
 234 /*
 235  * Set/change channels.  If the channel is really being changed, it's done
 236  * by reseting the chip.  To accomplish this we must first cleanup any pending
 237  * DMA, then restart stuff.
 238 */
 239 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 240                     struct ath9k_channel *hchan)
 241 {
 242         struct ath_hw *ah = sc->sc_ah;
 243         bool fastcc = true, stopped;
 244         struct ieee80211_channel *channel = hw->conf.channel;
 245         int r;
 246
 247         if (sc->sc_flags & SC_OP_INVALID)
 248                 return -EIO;
 249
 250         ath9k_ps_wakeup(sc);
 251
 252         /*
 253          * This is only performed if the channel settings have
 254          * actually changed.
 255          *
 256          * To switch channels clear any pending DMA operations;
 257          * wait long enough for the RX fifo to drain, reset the
 258          * hardware at the new frequency, and then re-enable
 259          * the relevant bits of the h/w.
 260          */
 261         ath9k_hw_set_interrupts(ah, 0);
 262         ath_drain_all_txq(sc, false);
 263         stopped = ath_stoprecv(sc);
 264
 265         /* XXX: do not flush receive queue here. We don't want
 266          * to flush data frames already in queue because of
 267          * changing channel. */
 268
 269         if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
 270                 fastcc = false;
 271
 272         DPRINTF(sc, ATH_DBG_CONFIG,
 273                 "(%u MHz) -> (%u MHz), chanwidth: %d\n",
 274                 sc->sc_ah->curchan->channel,
 275                 channel->center_freq, sc->tx_chan_width);
 276
 277         spin_lock_bh(&sc->sc_resetlock);
 278
 279         r = ath9k_hw_reset(ah, hchan, fastcc);
 280         if (r) {
 281                 DPRINTF(sc, ATH_DBG_FATAL,
 282                         "Unable to reset channel (%u Mhz) "
 283                         "reset status %u\n",
 284                         channel->center_freq, r);
 285                 spin_unlock_bh(&sc->sc_resetlock);
 286                 return r;
 287         }
 288         spin_unlock_bh(&sc->sc_resetlock);
 289
 290         sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
 291         sc->sc_flags &= ~SC_OP_FULL_RESET;
 292
 293         if (ath_startrecv(sc) != 0) {
 294                 DPRINTF(sc, ATH_DBG_FATAL,
 295                         "Unable to restart recv logic\n");
 296                 return -EIO;
 297         }
 298
 299         ath_cache_conf_rate(sc, &hw->conf);
 300         ath_update_txpow(sc);
 301         ath9k_hw_set_interrupts(ah, sc->imask);
 302         ath9k_ps_restore(sc);
 303         return 0;
 304 }
 305
 306 /*
 307  *  This routine performs the periodic noise floor calibration function
 308  *  that is used to adjust and optimize the chip performance.  This
 309  *  takes environmental changes (location, temperature) into account.
 310  *  When the task is complete, it reschedules itself depending on the
 311  *  appropriate interval that was calculated.
 312  */
 313 static void ath_ani_calibrate(unsigned long data)
 314 {
 315         struct ath_softc *sc = (struct ath_softc *)data;
 316         struct ath_hw *ah = sc->sc_ah;
 317         bool longcal = false;
 318         bool shortcal = false;
 319         bool aniflag = false;
 320         unsigned int timestamp = jiffies_to_msecs(jiffies);
 321         u32 cal_interval, short_cal_interval;
 322
 323         short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
 324                 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
 325
 326         /*
 327         * don't calibrate when we're scanning.
 328         * we are most likely not on our home channel.
 329         */
 330         if (sc->sc_flags & SC_OP_SCANNING)
 331                 goto set_timer;
 332
 333         /* Long calibration runs independently of short calibration. */
 334         if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
 335                 longcal = true;
 336                 DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 337                 sc->ani.longcal_timer = timestamp;
 338         }
 339
 340         /* Short calibration applies only while caldone is false */
 341         if (!sc->ani.caldone) {
 342                 if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) {
 343                         shortcal = true;
 344                         DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies);
 345                         sc->ani.shortcal_timer = timestamp;
 346                         sc->ani.resetcal_timer = timestamp;
 347                 }
 348         } else {
 349                 if ((timestamp - sc->ani.resetcal_timer) >=
 350                     ATH_RESTART_CALINTERVAL) {
 351                         sc->ani.caldone = ath9k_hw_reset_calvalid(ah);
 352                         if (sc->ani.caldone)
 353                                 sc->ani.resetcal_timer = timestamp;
 354                 }
 355         }
 356
 357         /* Verify whether we must check ANI */
 358         if ((timestamp - sc->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
 359                 aniflag = true;
 360                 sc->ani.checkani_timer = timestamp;
 361         }
 362
 363         /* Skip all processing if there's nothing to do. */
 364         if (longcal || shortcal || aniflag) {
 365                 /* Call ANI routine if necessary */
 366                 if (aniflag)
 367                         ath9k_hw_ani_monitor(ah, &sc->nodestats, ah->curchan);
 368
 369                 /* Perform calibration if necessary */
 370                 if (longcal || shortcal) {
 371                         bool iscaldone = false;
 372
 373                         if (ath9k_hw_calibrate(ah, ah->curchan,
 374                                                sc->rx_chainmask, longcal,
 375                                                &iscaldone)) {
 376                                 if (longcal)
 377                                         sc->ani.noise_floor =
 378                                                 ath9k_hw_getchan_noise(ah,
 379                                                                ah->curchan);
 380
 381                                 DPRINTF(sc, ATH_DBG_ANI,
 382                                         "calibrate chan %u/%x nf: %d\n",
 383                                         ah->curchan->channel,
 384                                         ah->curchan->channelFlags,
 385                                         sc->ani.noise_floor);
 386                         } else {
 387                                 DPRINTF(sc, ATH_DBG_ANY,
 388                                         "calibrate chan %u/%x failed\n",
 389                                         ah->curchan->channel,
 390                                         ah->curchan->channelFlags);
 391                         }
 392                         sc->ani.caldone = iscaldone;
 393                 }
 394         }
 395
 396 set_timer:
 397         /*
 398         * Set timer interval based on previous results.
 399         * The interval must be the shortest necessary to satisfy ANI,
 400         * short calibration and long calibration.
 401         */
 402         cal_interval = ATH_LONG_CALINTERVAL;
 403         if (sc->sc_ah->config.enable_ani)
 404                 cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
 405         if (!sc->ani.caldone)
 406                 cal_interval = min(cal_interval, (u32)short_cal_interval);
 407
 408         mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 409 }
 410
 411 /*
 412  * Update tx/rx chainmask. For legacy association,
 413  * hard code chainmask to 1x1, for 11n association, use
 414  * the chainmask configuration, for bt coexistence, use
 415  * the chainmask configuration even in legacy mode.
 416  */
 417 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 418 {
 419         sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
 420         if (is_ht ||
 421             (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
 422                 sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
 423                 sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
 424         } else {
 425                 sc->tx_chainmask = 1;
 426                 sc->rx_chainmask = 1;
 427         }
 428
 429         DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n",
 430                 sc->tx_chainmask, sc->rx_chainmask);
 431 }
 432
 433 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 434 {
 435         struct ath_node *an;
 436
 437         an = (struct ath_node *)sta->drv_priv;
 438
 439         if (sc->sc_flags & SC_OP_TXAGGR)
 440                 ath_tx_node_init(sc, an);
 441
 442         an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
 443                              sta->ht_cap.ampdu_factor);
 444         an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
 445 }
 446
 447 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 448 {
 449         struct ath_node *an = (struct ath_node *)sta->drv_priv;
 450
 451         if (sc->sc_flags & SC_OP_TXAGGR)
 452                 ath_tx_node_cleanup(sc, an);
 453 }
 454
 455 static void ath9k_tasklet(unsigned long data)
 456 {
 457         struct ath_softc *sc = (struct ath_softc *)data;
 458         u32 status = sc->intrstatus;
 459
 460         if (status & ATH9K_INT_FATAL) {
 461                 /* need a chip reset */
 462                 ath_reset(sc, false);
 463                 return;
 464         } else {
 465
 466                 if (status &
 467                     (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
 468                         spin_lock_bh(&sc->rx.rxflushlock);
 469                         ath_rx_tasklet(sc, 0);
 470                         spin_unlock_bh(&sc->rx.rxflushlock);
 471                 }
 472                 /* XXX: optimize this */
 473                 if (status & ATH9K_INT_TX)
 474                         ath_tx_tasklet(sc);
 475         }
 476
 477         /* re-enable hardware interrupt */
 478         ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 479 }
 480
 481 irqreturn_t ath_isr(int irq, void *dev)
 482 {
 483         struct ath_softc *sc = dev;
 484         struct ath_hw *ah = sc->sc_ah;
 485         enum ath9k_int status;
 486         bool sched = false;
 487
 488         do {
 489                 if (sc->sc_flags & SC_OP_INVALID) {
 490                         /*
 491                          * The hardware is not ready/present, don't
 492                          * touch anything. Note this can happen early
 493                          * on if the IRQ is shared.
 494                          */
 495                         return IRQ_NONE;
 496                 }
 497                 if (!ath9k_hw_intrpend(ah)) {   /* shared irq, not for us */
 498                         return IRQ_NONE;
 499                 }
 500
 501                 /*
 502                  * Figure out the reason(s) for the interrupt.  Note
 503                  * that the hal returns a pseudo-ISR that may include
 504                  * bits we haven't explicitly enabled so we mask the
 505                  * value to insure we only process bits we requested.
 506                  */
 507                 ath9k_hw_getisr(ah, &status);   /* NB: clears ISR too */
 508
 509                 status &= sc->imask;    /* discard unasked-for bits */
 510
 511                 /*
 512                  * If there are no status bits set, then this interrupt was not
 513                  * for me (should have been caught above).
 514                  */
 515                 if (!status)
 516                         return IRQ_NONE;
 517
 518                 sc->intrstatus = status;
 519                 ath9k_ps_wakeup(sc);
 520
 521                 if (status & ATH9K_INT_FATAL) {
 522                         /* need a chip reset */
 523                         sched = true;
 524                 } else if (status & ATH9K_INT_RXORN) {
 525                         /* need a chip reset */
 526                         sched = true;
 527                 } else {
 528                         if (status & ATH9K_INT_SWBA) {
 529                                 /* schedule a tasklet for beacon handling */
 530                                 tasklet_schedule(&sc->bcon_tasklet);
 531                         }
 532                         if (status & ATH9K_INT_RXEOL) {
 533                                 /*
 534                                  * NB: the hardware should re-read the link when
 535                                  *     RXE bit is written, but it doesn't work
 536                                  *     at least on older hardware revs.
 537                                  */
 538                                 sched = true;
 539                         }
 540
 541                         if (status & ATH9K_INT_TXURN)
 542                                 /* bump tx trigger level */
 543                                 ath9k_hw_updatetxtriglevel(ah, true);
 544                         /* XXX: optimize this */
 545                         if (status & ATH9K_INT_RX)
 546                                 sched = true;
 547                         if (status & ATH9K_INT_TX)
 548                                 sched = true;
 549                         if (status & ATH9K_INT_BMISS)
 550                                 sched = true;
 551                         /* carrier sense timeout */
 552                         if (status & ATH9K_INT_CST)
 553                                 sched = true;
 554                         if (status & ATH9K_INT_MIB) {
 555                                 /*
 556                                  * Disable interrupts until we service the MIB
 557                                  * interrupt; otherwise it will continue to
 558                                  * fire.
 559                                  */
 560                                 ath9k_hw_set_interrupts(ah, 0);
 561                                 /*
 562                                  * Let the hal handle the event. We assume
 563                                  * it will clear whatever condition caused
 564                                  * the interrupt.
 565                                  */
 566                                 ath9k_hw_procmibevent(ah, &sc->nodestats);
 567                                 ath9k_hw_set_interrupts(ah, sc->imask);
 568                         }
 569                         if (status & ATH9K_INT_TIM_TIMER) {
 570                                 if (!(ah->caps.hw_caps &
 571                                       ATH9K_HW_CAP_AUTOSLEEP)) {
 572                                         /* Clear RxAbort bit so that we can
 573                                          * receive frames */
 574                                         ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
 575                                         ath9k_hw_setrxabort(ah, 0);
 576                                         sched = true;
 577                                         sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
 578                                 }
 579                         }
 580                         if (status & ATH9K_INT_TSFOOR) {
 581                                 /* FIXME: Handle this interrupt for power save */
 582                                 sched = true;
 583                         }
 584                 }
 585                 ath9k_ps_restore(sc);
 586         } while (0);
 587
 588         ath_debug_stat_interrupt(sc, status);
 589
 590         if (sched) {
 591                 /* turn off every interrupt except SWBA */
 592                 ath9k_hw_set_interrupts(ah, (sc->imask & ATH9K_INT_SWBA));
 593                 tasklet_schedule(&sc->intr_tq);
 594         }
 595
 596         return IRQ_HANDLED;
 597 }
 598
 599 static u32 ath_get_extchanmode(struct ath_softc *sc,
 600                                struct ieee80211_channel *chan,
 601                                enum nl80211_channel_type channel_type)
 602 {
 603         u32 chanmode = 0;
 604
 605         switch (chan->band) {
 606         case IEEE80211_BAND_2GHZ:
 607                 switch(channel_type) {
 608                 case NL80211_CHAN_NO_HT:
 609                 case NL80211_CHAN_HT20:
 610                         chanmode = CHANNEL_G_HT20;
 611                         break;
 612                 case NL80211_CHAN_HT40PLUS:
 613                         chanmode = CHANNEL_G_HT40PLUS;
 614                         break;
 615                 case NL80211_CHAN_HT40MINUS:
 616                         chanmode = CHANNEL_G_HT40MINUS;
 617                         break;
 618                 }
 619                 break;
 620         case IEEE80211_BAND_5GHZ:
 621                 switch(channel_type) {
 622                 case NL80211_CHAN_NO_HT:
 623                 case NL80211_CHAN_HT20:
 624                         chanmode = CHANNEL_A_HT20;
 625                         break;
 626                 case NL80211_CHAN_HT40PLUS:
 627                         chanmode = CHANNEL_A_HT40PLUS;
 628                         break;
 629                 case NL80211_CHAN_HT40MINUS:
 630                         chanmode = CHANNEL_A_HT40MINUS;
 631                         break;
 632                 }
 633                 break;
 634         default:
 635                 break;
 636         }
 637
 638         return chanmode;
 639 }
 640
 641 static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
 642                            struct ath9k_keyval *hk, const u8 *addr,
 643                            bool authenticator)
 644 {
 645         const u8 *key_rxmic;
 646         const u8 *key_txmic;
 647
 648         key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
 649         key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
 650
 651         if (addr == NULL) {
 652                 /*
 653                  * Group key installation - only two key cache entries are used
 654                  * regardless of splitmic capability since group key is only
 655                  * used either for TX or RX.
 656                  */
 657                 if (authenticator) {
 658                         memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
 659                         memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_mic));
 660                 } else {
 661                         memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 662                         memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic));
 663                 }
 664                 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
 665         }
 666         if (!sc->splitmic) {
 667                 /* TX and RX keys share the same key cache entry. */
 668                 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 669                 memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
 670                 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
 671         }
 672
 673         /* Separate key cache entries for TX and RX */
 674
 675         /* TX key goes at first index, RX key at +32. */
 676         memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
 677         if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
 678                 /* TX MIC entry failed. No need to proceed further */
 679                 DPRINTF(sc, ATH_DBG_KEYCACHE,
 680                         "Setting TX MIC Key Failed\n");
 681                 return 0;
 682         }
 683
 684         memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 685         /* XXX delete tx key on failure? */
 686         return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr);
 687 }
 688
 689 static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
 690 {
 691         int i;
 692
 693         for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
 694                 if (test_bit(i, sc->keymap) ||
 695                     test_bit(i + 64, sc->keymap))
 696                         continue; /* At least one part of TKIP key allocated */
 697                 if (sc->splitmic &&
 698                     (test_bit(i + 32, sc->keymap) ||
 699                      test_bit(i + 64 + 32, sc->keymap)))
 700                         continue; /* At least one part of TKIP key allocated */
 701
 702                 /* Found a free slot for a TKIP key */
 703                 return i;
 704         }
 705         return -1;
 706 }
 707
 708 static int ath_reserve_key_cache_slot(struct ath_softc *sc)
 709 {
 710         int i;
 711
 712         /* First, try to find slots that would not be available for TKIP. */
 713         if (sc->splitmic) {
 714                 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 4; i++) {
 715                         if (!test_bit(i, sc->keymap) &&
 716                             (test_bit(i + 32, sc->keymap) ||
 717                              test_bit(i + 64, sc->keymap) ||
 718                              test_bit(i + 64 + 32, sc->keymap)))
 719                                 return i;
 720                         if (!test_bit(i + 32, sc->keymap) &&
 721                             (test_bit(i, sc->keymap) ||
 722                              test_bit(i + 64, sc->keymap) ||
 723                              test_bit(i + 64 + 32, sc->keymap)))
 724                                 return i + 32;
 725                         if (!test_bit(i + 64, sc->keymap) &&
 726                             (test_bit(i , sc->keymap) ||
 727                              test_bit(i + 32, sc->keymap) ||
 728                              test_bit(i + 64 + 32, sc->keymap)))
 729                                 return i + 64;
 730                         if (!test_bit(i + 64 + 32, sc->keymap) &&
 731                             (test_bit(i, sc->keymap) ||
 732                              test_bit(i + 32, sc->keymap) ||
 733                              test_bit(i + 64, sc->keymap)))
 734                                 return i + 64 + 32;
 735                 }
 736         } else {
 737                 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
 738                         if (!test_bit(i, sc->keymap) &&
 739                             test_bit(i + 64, sc->keymap))
 740                                 return i;
 741                         if (test_bit(i, sc->keymap) &&
 742                             !test_bit(i + 64, sc->keymap))
 743                                 return i + 64;
 744                 }
 745         }
 746
 747         /* No partially used TKIP slots, pick any available slot */
 748         for (i = IEEE80211_WEP_NKID; i < sc->keymax; i++) {
 749                 /* Do not allow slots that could be needed for TKIP group keys
 750                  * to be used. This limitation could be removed if we know that
 751                  * TKIP will not be used. */
 752                 if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
 753                         continue;
 754                 if (sc->splitmic) {
 755                         if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
 756                                 continue;
 757                         if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
 758                                 continue;
 759                 }
 760
 761                 if (!test_bit(i, sc->keymap))
 762                         return i; /* Found a free slot for a key */
 763         }
 764
 765         /* No free slot found */
 766         return -1;
 767 }
 768
 769 static int ath_key_config(struct ath_softc *sc,
 770                           struct ieee80211_vif *vif,
 771                           struct ieee80211_sta *sta,
 772                           struct ieee80211_key_conf *key)
 773 {
 774         struct ath9k_keyval hk;
 775         const u8 *mac = NULL;
 776         int ret = 0;
 777         int idx;
 778
 779         memset(&hk, 0, sizeof(hk));
 780
 781         switch (key->alg) {
 782         case ALG_WEP:
 783                 hk.kv_type = ATH9K_CIPHER_WEP;
 784                 break;
 785         case ALG_TKIP:
 786                 hk.kv_type = ATH9K_CIPHER_TKIP;
 787                 break;
 788         case ALG_CCMP:
 789                 hk.kv_type = ATH9K_CIPHER_AES_CCM;
 790                 break;
 791         default:
 792                 return -EOPNOTSUPP;
 793         }
 794
 795         hk.kv_len = key->keylen;
 796         memcpy(hk.kv_val, key->key, key->keylen);
 797
 798         if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
 799                 /* For now, use the default keys for broadcast keys. This may
 800                  * need to change with virtual interfaces. */
 801                 idx = key->keyidx;
 802         } else if (key->keyidx) {
 803                 if (WARN_ON(!sta))
 804                         return -EOPNOTSUPP;
 805                 mac = sta->addr;
 806
 807                 if (vif->type != NL80211_IFTYPE_AP) {
 808                         /* Only keyidx 0 should be used with unicast key, but
 809                          * allow this for client mode for now. */
 810                         idx = key->keyidx;
 811                 } else
 812                         return -EIO;
 813         } else {
 814                 if (WARN_ON(!sta))
 815                         return -EOPNOTSUPP;
 816                 mac = sta->addr;
 817
 818                 if (key->alg == ALG_TKIP)
 819                         idx = ath_reserve_key_cache_slot_tkip(sc);
 820                 else
 821                         idx = ath_reserve_key_cache_slot(sc);
 822                 if (idx < 0)
 823                         return -ENOSPC; /* no free key cache entries */
 824         }
 825
 826         if (key->alg == ALG_TKIP)
 827                 ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac,
 828                                       vif->type == NL80211_IFTYPE_AP);
 829         else
 830                 ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac);
 831
 832         if (!ret)
 833                 return -EIO;
 834
 835         set_bit(idx, sc->keymap);
 836         if (key->alg == ALG_TKIP) {
 837                 set_bit(idx + 64, sc->keymap);
 838                 if (sc->splitmic) {
 839                         set_bit(idx + 32, sc->keymap);
 840                         set_bit(idx + 64 + 32, sc->keymap);
 841                 }
 842         }
 843
 844         return idx;
 845 }
 846
 847 static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
 848 {
 849         ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx);
 850         if (key->hw_key_idx < IEEE80211_WEP_NKID)
 851                 return;
 852
 853         clear_bit(key->hw_key_idx, sc->keymap);
 854         if (key->alg != ALG_TKIP)
 855                 return;
 856
 857         clear_bit(key->hw_key_idx + 64, sc->keymap);
 858         if (sc->splitmic) {
 859                 clear_bit(key->hw_key_idx + 32, sc->keymap);
 860                 clear_bit(key->hw_key_idx + 64 + 32, sc->keymap);
 861         }
 862 }
 863
 864 static void setup_ht_cap(struct ath_softc *sc,
 865                          struct ieee80211_sta_ht_cap *ht_info)
 866 {
 867 #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3       /* 2 ^ 16 */
 868 #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6          /* 8 usec */
 869
 870         ht_info->ht_supported = true;
 871         ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 872                        IEEE80211_HT_CAP_SM_PS |
 873                        IEEE80211_HT_CAP_SGI_40 |
 874                        IEEE80211_HT_CAP_DSSSCCK40;
 875
 876         ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
 877         ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
 878
 879         /* set up supported mcs set */
 880         memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
 881
 882         switch(sc->rx_chainmask) {
 883         case 1:
 884                 ht_info->mcs.rx_mask[0] = 0xff;
 885                 break;
 886         case 3:
 887         case 5:
 888         case 7:
 889         default:
 890                 ht_info->mcs.rx_mask[0] = 0xff;
 891                 ht_info->mcs.rx_mask[1] = 0xff;
 892                 break;
 893         }
 894
 895         ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 896 }
 897
 898 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 899                                  struct ieee80211_vif *vif,
 900                                  struct ieee80211_bss_conf *bss_conf)
 901 {
 902         struct ath_vif *avp = (void *)vif->drv_priv;
 903
 904         if (bss_conf->assoc) {
 905                 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
 906                         bss_conf->aid, sc->curbssid);
 907
 908                 /* New association, store aid */
 909                 if (avp->av_opmode == NL80211_IFTYPE_STATION) {
 910                         sc->curaid = bss_conf->aid;
 911                         ath9k_hw_write_associd(sc);
 912                 }
 913
 914                 /* Configure the beacon */
 915                 ath_beacon_config(sc, vif);
 916
 917                 /* Reset rssi stats */
 918                 sc->nodestats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
 919                 sc->nodestats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
 920                 sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
 921                 sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
 922
 923                 /* Start ANI */
 924                 mod_timer(&sc->ani.timer,
 925                           jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
 926         } else {
 927                 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISSOC\n");
 928                 sc->curaid = 0;
 929         }
 930 }
 931
 932 /********************************/
 933 /*       LED functions          */
 934 /********************************/
 935
 936 static void ath_led_blink_work(struct work_struct *work)
 937 {
 938         struct ath_softc *sc = container_of(work, struct ath_softc,
 939                                             ath_led_blink_work.work);
 940
 941         if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
 942                 return;
 943         ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
 944                           (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
 945
 946         queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work,
 947                            (sc->sc_flags & SC_OP_LED_ON) ?
 948                            msecs_to_jiffies(sc->led_off_duration) :
 949                            msecs_to_jiffies(sc->led_on_duration));
 950
 951         sc->led_on_duration =
 952                         max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25);
 953         sc->led_off_duration =
 954                         max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10);
 955         sc->led_on_cnt = sc->led_off_cnt = 0;
 956         if (sc->sc_flags & SC_OP_LED_ON)
 957                 sc->sc_flags &= ~SC_OP_LED_ON;
 958         else
 959                 sc->sc_flags |= SC_OP_LED_ON;
 960 }
 961
 962 static void ath_led_brightness(struct led_classdev *led_cdev,
 963                                enum led_brightness brightness)
 964 {
 965         struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
 966         struct ath_softc *sc = led->sc;
 967
 968         switch (brightness) {
 969         case LED_OFF:
 970                 if (led->led_type == ATH_LED_ASSOC ||
 971                     led->led_type == ATH_LED_RADIO) {
 972                         ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
 973                                 (led->led_type == ATH_LED_RADIO));
 974                         sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
 975                         if (led->led_type == ATH_LED_RADIO)
 976                                 sc->sc_flags &= ~SC_OP_LED_ON;
 977                 } else {
 978                         sc->led_off_cnt++;
 979                 }
 980                 break;
 981         case LED_FULL:
 982                 if (led->led_type == ATH_LED_ASSOC) {
 983                         sc->sc_flags |= SC_OP_LED_ASSOCIATED;
 984                         queue_delayed_work(sc->hw->workqueue,
 985                                            &sc->ath_led_blink_work, 0);
 986                 } else if (led->led_type == ATH_LED_RADIO) {
 987                         ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
 988                         sc->sc_flags |= SC_OP_LED_ON;
 989                 } else {
 990                         sc->led_on_cnt++;
 991                 }
 992                 break;
 993         default:
 994                 break;
 995         }
 996 }
 997
 998 static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
 999                             char *trigger)
1000 {
1001         int ret;
1002
1003         led->sc = sc;
1004         led->led_cdev.name = led->name;
1005         led->led_cdev.default_trigger = trigger;
1006         led->led_cdev.brightness_set = ath_led_brightness;
1007
1008         ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
1009         if (ret)
1010                 DPRINTF(sc, ATH_DBG_FATAL,
1011                         "Failed to register led:%s", led->name);
1012         else
1013                 led->registered = 1;
1014         return ret;
1015 }
1016
1017 static void ath_unregister_led(struct ath_led *led)
1018 {
1019         if (led->registered) {
1020                 led_classdev_unregister(&led->led_cdev);
1021                 led->registered = 0;
1022         }
1023 }
1024
1025 static void ath_deinit_leds(struct ath_softc *sc)
1026 {
1027         cancel_delayed_work_sync(&sc->ath_led_blink_work);
1028         ath_unregister_led(&sc->assoc_led);
1029         sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
1030         ath_unregister_led(&sc->tx_led);
1031         ath_unregister_led(&sc->rx_led);
1032         ath_unregister_led(&sc->radio_led);
1033         ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1034 }
1035
1036 static void ath_init_leds(struct ath_softc *sc)
1037 {
1038         char *trigger;
1039         int ret;
1040
1041         /* Configure gpio 1 for output */
1042         ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
1043                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1044         /* LED off, active low */
1045         ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1046
1047         INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
1048
1049         trigger = ieee80211_get_radio_led_name(sc->hw);
1050         snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
1051                 "ath9k-%s::radio", wiphy_name(sc->hw->wiphy));
1052         ret = ath_register_led(sc, &sc->radio_led, trigger);
1053         sc->radio_led.led_type = ATH_LED_RADIO;
1054         if (ret)
1055                 goto fail;
1056
1057         trigger = ieee80211_get_assoc_led_name(sc->hw);
1058         snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
1059                 "ath9k-%s::assoc", wiphy_name(sc->hw->wiphy));
1060         ret = ath_register_led(sc, &sc->assoc_led, trigger);
1061         sc->assoc_led.led_type = ATH_LED_ASSOC;
1062         if (ret)
1063                 goto fail;
1064
1065         trigger = ieee80211_get_tx_led_name(sc->hw);
1066         snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
1067                 "ath9k-%s::tx", wiphy_name(sc->hw->wiphy));
1068         ret = ath_register_led(sc, &sc->tx_led, trigger);
1069         sc->tx_led.led_type = ATH_LED_TX;
1070         if (ret)
1071                 goto fail;
1072
1073         trigger = ieee80211_get_rx_led_name(sc->hw);
1074         snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
1075                 "ath9k-%s::rx", wiphy_name(sc->hw->wiphy));
1076         ret = ath_register_led(sc, &sc->rx_led, trigger);
1077         sc->rx_led.led_type = ATH_LED_RX;
1078         if (ret)
1079                 goto fail;
1080
1081         return;
1082
1083 fail:
1084         ath_deinit_leds(sc);
1085 }
1086
1087 void ath_radio_enable(struct ath_softc *sc)
1088 {
1089         struct ath_hw *ah = sc->sc_ah;
1090         struct ieee80211_channel *channel = sc->hw->conf.channel;
1091         int r;
1092
1093         ath9k_ps_wakeup(sc);
1094         spin_lock_bh(&sc->sc_resetlock);
1095
1096         r = ath9k_hw_reset(ah, ah->curchan, false);
1097
1098         if (r) {
1099                 DPRINTF(sc, ATH_DBG_FATAL,
1100                         "Unable to reset channel %u (%uMhz) ",
1101                         "reset status %u\n",
1102                         channel->center_freq, r);
1103         }
1104         spin_unlock_bh(&sc->sc_resetlock);
1105
1106         ath_update_txpow(sc);
1107         if (ath_startrecv(sc) != 0) {
1108                 DPRINTF(sc, ATH_DBG_FATAL,
1109                         "Unable to restart recv logic\n");
1110                 return;
1111         }
1112
1113         if (sc->sc_flags & SC_OP_BEACONS)
1114                 ath_beacon_config(sc, NULL);    /* restart beacons */
1115
1116         /* Re-Enable  interrupts */
1117         ath9k_hw_set_interrupts(ah, sc->imask);
1118
1119         /* Enable LED */
1120         ath9k_hw_cfg_output(ah, ATH_LED_PIN,
1121                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1122         ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0);
1123
1124         ieee80211_wake_queues(sc->hw);
1125         ath9k_ps_restore(sc);
1126 }
1127
1128 void ath_radio_disable(struct ath_softc *sc)
1129 {
1130         struct ath_hw *ah = sc->sc_ah;
1131         struct ieee80211_channel *channel = sc->hw->conf.channel;
1132         int r;
1133
1134         ath9k_ps_wakeup(sc);
1135         ieee80211_stop_queues(sc->hw);
1136
1137         /* Disable LED */
1138         ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1);
1139         ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN);
1140
1141         /* Disable interrupts */
1142         ath9k_hw_set_interrupts(ah, 0);
1143
1144         ath_drain_all_txq(sc, false);   /* clear pending tx frames */
1145         ath_stoprecv(sc);               /* turn off frame recv */
1146         ath_flushrecv(sc);              /* flush recv queue */
1147
1148         spin_lock_bh(&sc->sc_resetlock);
1149         r = ath9k_hw_reset(ah, ah->curchan, false);
1150         if (r) {
1151                 DPRINTF(sc, ATH_DBG_FATAL,
1152                         "Unable to reset channel %u (%uMhz) "
1153                         "reset status %u\n",
1154                         channel->center_freq, r);
1155         }
1156         spin_unlock_bh(&sc->sc_resetlock);
1157
1158         ath9k_hw_phy_disable(ah);
1159         ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
1160         ath9k_ps_restore(sc);
1161 }
1162
1163 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1164
1165 /*******************/
1166 /*      Rfkill     */
1167 /*******************/
1168
1169 static bool ath_is_rfkill_set(struct ath_softc *sc)
1170 {
1171         struct ath_hw *ah = sc->sc_ah;
1172
1173         return ath9k_hw_gpio_get(ah, ah->rfkill_gpio) ==
1174                                   ah->rfkill_polarity;
1175 }
1176
1177 /* h/w rfkill poll function */
1178 static void ath_rfkill_poll(struct work_struct *work)
1179 {
1180         struct ath_softc *sc = container_of(work, struct ath_softc,
1181                                             rf_kill.rfkill_poll.work);
1182         bool radio_on;
1183
1184         if (sc->sc_flags & SC_OP_INVALID)
1185                 return;
1186
1187         radio_on = !ath_is_rfkill_set(sc);
1188
1189         /*
1190          * enable/disable radio only when there is a
1191          * state change in RF switch
1192          */
1193         if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) {
1194                 enum rfkill_state state;
1195
1196                 if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) {
1197                         state = radio_on ? RFKILL_STATE_SOFT_BLOCKED
1198                                 : RFKILL_STATE_HARD_BLOCKED;
1199                 } else if (radio_on) {
1200                         ath_radio_enable(sc);
1201                         state = RFKILL_STATE_UNBLOCKED;
1202                 } else {
1203                         ath_radio_disable(sc);
1204                         state = RFKILL_STATE_HARD_BLOCKED;
1205                 }
1206
1207                 if (state == RFKILL_STATE_HARD_BLOCKED)
1208                         sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED;
1209                 else
1210                         sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED;
1211
1212                 rfkill_force_state(sc->rf_kill.rfkill, state);
1213         }
1214
1215         queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll,
1216                            msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL));
1217 }
1218
1219 /* s/w rfkill handler */
1220 static int ath_sw_toggle_radio(void *data, enum rfkill_state state)
1221 {
1222         struct ath_softc *sc = data;
1223
1224         switch (state) {
1225         case RFKILL_STATE_SOFT_BLOCKED:
1226                 if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED |
1227                     SC_OP_RFKILL_SW_BLOCKED)))
1228                         ath_radio_disable(sc);
1229                 sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED;
1230                 return 0;
1231         case RFKILL_STATE_UNBLOCKED:
1232                 if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) {
1233                         sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED;
1234                         if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) {
1235                                 DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the"
1236                                         "radio as it is disabled by h/w\n");
1237                                 return -EPERM;
1238                         }
1239                         ath_radio_enable(sc);
1240                 }
1241                 return 0;
1242         default:
1243                 return -EINVAL;
1244         }
1245 }
1246
1247 /* Init s/w rfkill */
1248 static int ath_init_sw_rfkill(struct ath_softc *sc)
1249 {
1250         sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy),
1251                                              RFKILL_TYPE_WLAN);
1252         if (!sc->rf_kill.rfkill) {
1253                 DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
1254                 return -ENOMEM;
1255         }
1256
1257         snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
1258                 "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
1259         sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name;
1260         sc->rf_kill.rfkill->data = sc;
1261         sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio;
1262         sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED;
1263         sc->rf_kill.rfkill->user_claim_unsupported = 1;
1264
1265         return 0;
1266 }
1267
1268 /* Deinitialize rfkill */
1269 static void ath_deinit_rfkill(struct ath_softc *sc)
1270 {
1271         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1272                 cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
1273
1274         if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
1275                 rfkill_unregister(sc->rf_kill.rfkill);
1276                 sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
1277                 sc->rf_kill.rfkill = NULL;
1278         }
1279 }
1280
1281 static int ath_start_rfkill_poll(struct ath_softc *sc)
1282 {
1283         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1284                 queue_delayed_work(sc->hw->workqueue,
1285                                    &sc->rf_kill.rfkill_poll, 0);
1286
1287         if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
1288                 if (rfkill_register(sc->rf_kill.rfkill)) {
1289                         DPRINTF(sc, ATH_DBG_FATAL,
1290                                 "Unable to register rfkill\n");
1291                         rfkill_free(sc->rf_kill.rfkill);
1292
1293                         /* Deinitialize the device */
1294                         ath_cleanup(sc);
1295                         return -EIO;
1296                 } else {
1297                         sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
1298                 }
1299         }
1300
1301         return 0;
1302 }
1303 #endif /* CONFIG_RFKILL */
1304
1305 void ath_cleanup(struct ath_softc *sc)
1306 {
1307         ath_detach(sc);
1308         free_irq(sc->irq, sc);
1309         ath_bus_cleanup(sc);
1310         kfree(sc->sec_wiphy);
1311         ieee80211_free_hw(sc->hw);
1312 }
1313
1314 void ath_detach(struct ath_softc *sc)
1315 {
1316         struct ieee80211_hw *hw = sc->hw;
1317         int i = 0;
1318
1319         ath9k_ps_wakeup(sc);
1320
1321         DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
1322
1323 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1324         ath_deinit_rfkill(sc);
1325 #endif
1326         ath_deinit_leds(sc);
1327         cancel_work_sync(&sc->chan_work);
1328         cancel_delayed_work_sync(&sc->wiphy_work);
1329
1330         for (i = 0; i < sc->num_sec_wiphy; i++) {
1331                 struct ath_wiphy *aphy = sc->sec_wiphy[i];
1332                 if (aphy == NULL)
1333                         continue;
1334                 sc->sec_wiphy[i] = NULL;
1335                 ieee80211_unregister_hw(aphy->hw);
1336                 ieee80211_free_hw(aphy->hw);
1337         }
1338         ieee80211_unregister_hw(hw);
1339         ath_rx_cleanup(sc);
1340         ath_tx_cleanup(sc);
1341
1342         tasklet_kill(&sc->intr_tq);
1343         tasklet_kill(&sc->bcon_tasklet);
1344
1345         if (!(sc->sc_flags & SC_OP_INVALID))
1346                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
1347
1348         /* cleanup tx queues */
1349         for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1350                 if (ATH_TXQ_SETUP(sc, i))
1351                         ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1352
1353         ath9k_hw_detach(sc->sc_ah);
1354         ath9k_exit_debug(sc);
1355         ath9k_ps_restore(sc);
1356 }
1357
1358 static int ath_init(u16 devid, struct ath_softc *sc)
1359 {
1360         struct ath_hw *ah = NULL;
1361         int status;
1362         int error = 0, i;
1363         int csz = 0;
1364
1365         /* XXX: hardware will not be ready until ath_open() being called */
1366         sc->sc_flags |= SC_OP_INVALID;
1367
1368         if (ath9k_init_debug(sc) < 0)
1369                 printk(KERN_ERR "Unable to create debugfs files\n");
1370
1371         spin_lock_init(&sc->wiphy_lock);
1372         spin_lock_init(&sc->sc_resetlock);
1373         spin_lock_init(&sc->sc_serial_rw);
1374         mutex_init(&sc->mutex);
1375         tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
1376         tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
1377                      (unsigned long)sc);
1378
1379         /*
1380          * Cache line size is used to size and align various
1381          * structures used to communicate with the hardware.
1382          */
1383         ath_read_cachesize(sc, &csz);
1384         /* XXX assert csz is non-zero */
1385         sc->cachelsz = csz << 2;        /* convert to bytes */
1386
1387         ah = ath9k_hw_attach(devid, sc, &status);
1388         if (ah == NULL) {
1389                 DPRINTF(sc, ATH_DBG_FATAL,
1390                         "Unable to attach hardware; HAL status %d\n", status);
1391                 error = -ENXIO;
1392                 goto bad;
1393         }
1394         sc->sc_ah = ah;
1395
1396         /* Get the hardware key cache size. */
1397         sc->keymax = ah->caps.keycache_size;
1398         if (sc->keymax > ATH_KEYMAX) {
1399                 DPRINTF(sc, ATH_DBG_KEYCACHE,
1400                         "Warning, using only %u entries in %u key cache\n",
1401                         ATH_KEYMAX, sc->keymax);
1402                 sc->keymax = ATH_KEYMAX;
1403         }
1404
1405         /*
1406          * Reset the key cache since some parts do not
1407          * reset the contents on initial power up.
1408          */
1409         for (i = 0; i < sc->keymax; i++)
1410                 ath9k_hw_keyreset(ah, (u16) i);
1411
1412         if (ath9k_regd_init(sc->sc_ah))
1413                 goto bad;
1414
1415         /* default to MONITOR mode */
1416         sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
1417
1418         /* Setup rate tables */
1419
1420         ath_rate_attach(sc);
1421         ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
1422         ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
1423
1424         /*
1425          * Allocate hardware transmit queues: one queue for
1426          * beacon frames and one data queue for each QoS
1427          * priority.  Note that the hal handles reseting
1428          * these queues at the needed time.
1429          */
1430         sc->beacon.beaconq = ath_beaconq_setup(ah);
1431         if (sc->beacon.beaconq == -1) {
1432                 DPRINTF(sc, ATH_DBG_FATAL,
1433                         "Unable to setup a beacon xmit queue\n");
1434                 error = -EIO;
1435                 goto bad2;
1436         }
1437         sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
1438         if (sc->beacon.cabq == NULL) {
1439                 DPRINTF(sc, ATH_DBG_FATAL,
1440                         "Unable to setup CAB xmit queue\n");
1441                 error = -EIO;
1442                 goto bad2;
1443         }
1444
1445         sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
1446         ath_cabq_update(sc);
1447
1448         for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
1449                 sc->tx.hwq_map[i] = -1;
1450
1451         /* Setup data queues */
1452         /* NB: ensure BK queue is the lowest priority h/w queue */
1453         if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
1454                 DPRINTF(sc, ATH_DBG_FATAL,
1455                         "Unable to setup xmit queue for BK traffic\n");
1456                 error = -EIO;
1457                 goto bad2;
1458         }
1459
1460         if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
1461                 DPRINTF(sc, ATH_DBG_FATAL,
1462                         "Unable to setup xmit queue for BE traffic\n");
1463                 error = -EIO;
1464                 goto bad2;
1465         }
1466         if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
1467                 DPRINTF(sc, ATH_DBG_FATAL,
1468                         "Unable to setup xmit queue for VI traffic\n");
1469                 error = -EIO;
1470                 goto bad2;
1471         }
1472         if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
1473                 DPRINTF(sc, ATH_DBG_FATAL,
1474                         "Unable to setup xmit queue for VO traffic\n");
1475                 error = -EIO;
1476                 goto bad2;
1477         }
1478
1479         /* Initializes the noise floor to a reasonable default value.
1480          * Later on this will be updated during ANI processing. */
1481
1482         sc->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
1483         setup_timer(&sc->ani.timer, ath_ani_calibrate, (unsigned long)sc);
1484
1485         if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1486                                    ATH9K_CIPHER_TKIP, NULL)) {
1487                 /*
1488                  * Whether we should enable h/w TKIP MIC.
1489                  * XXX: if we don't support WME TKIP MIC, then we wouldn't
1490                  * report WMM capable, so it's always safe to turn on
1491                  * TKIP MIC in this case.
1492                  */
1493                 ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
1494                                        0, 1, NULL);
1495         }
1496
1497         /*
1498          * Check whether the separate key cache entries
1499          * are required to handle both tx+rx MIC keys.
1500          * With split mic keys the number of stations is limited
1501          * to 27 otherwise 59.
1502          */
1503         if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1504                                    ATH9K_CIPHER_TKIP, NULL)
1505             && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1506                                       ATH9K_CIPHER_MIC, NULL)
1507             && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
1508                                       0, NULL))
1509                 sc->splitmic = 1;
1510
1511         /* turn on mcast key search if possible */
1512         if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
1513                 (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
1514                                              1, NULL);
1515
1516         sc->config.txpowlimit = ATH_TXPOWER_MAX;
1517
1518         /* 11n Capabilities */
1519         if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
1520                 sc->sc_flags |= SC_OP_TXAGGR;
1521                 sc->sc_flags |= SC_OP_RXAGGR;
1522         }
1523
1524         sc->tx_chainmask = ah->caps.tx_chainmask;
1525         sc->rx_chainmask = ah->caps.rx_chainmask;
1526
1527         ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
1528         sc->rx.defant = ath9k_hw_getdefantenna(ah);
1529
1530         if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
1531                 memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
1532
1533         sc->beacon.slottime = ATH9K_SLOT_TIME_9;        /* default to short slot time */
1534
1535         /* initialize beacon slots */
1536         for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
1537                 sc->beacon.bslot[i] = NULL;
1538                 sc->beacon.bslot_aphy[i] = NULL;
1539         }
1540
1541         /* save MISC configurations */
1542         sc->config.swBeaconProcess = 1;
1543
1544         /* setup channels and rates */
1545
1546         sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
1547         sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
1548                 sc->rates[IEEE80211_BAND_2GHZ];
1549         sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
1550         sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
1551                 ARRAY_SIZE(ath9k_2ghz_chantable);
1552
1553         if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
1554                 sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
1555                 sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
1556                         sc->rates[IEEE80211_BAND_5GHZ];
1557                 sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
1558                 sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
1559                         ARRAY_SIZE(ath9k_5ghz_chantable);
1560         }
1561
1562         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)
1563                 ath9k_hw_btcoex_enable(sc->sc_ah);
1564
1565         return 0;
1566 bad2:
1567         /* cleanup tx queues */
1568         for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1569                 if (ATH_TXQ_SETUP(sc, i))
1570                         ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1571 bad:
1572         if (ah)
1573                 ath9k_hw_detach(ah);
1574         ath9k_exit_debug(sc);
1575
1576         return error;
1577 }
1578
1579 void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
1580 {
1581         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
1582                 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1583                 IEEE80211_HW_SIGNAL_DBM |
1584                 IEEE80211_HW_AMPDU_AGGREGATION |
1585                 IEEE80211_HW_SUPPORTS_PS |
1586                 IEEE80211_HW_PS_NULLFUNC_STACK |
1587                 IEEE80211_HW_SPECTRUM_MGMT;
1588
1589         if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
1590                 hw->flags |= IEEE80211_HW_MFP_CAPABLE;
1591
1592         hw->wiphy->interface_modes =
1593                 BIT(NL80211_IFTYPE_AP) |
1594                 BIT(NL80211_IFTYPE_STATION) |
1595                 BIT(NL80211_IFTYPE_ADHOC);
1596
1597         hw->wiphy->reg_notifier = ath9k_reg_notifier;
1598         hw->wiphy->strict_regulatory = true;
1599
1600         hw->queues = 4;
1601         hw->max_rates = 4;
1602         hw->channel_change_time = 5000;
1603         hw->max_listen_interval = 10;
1604         hw->max_rate_tries = ATH_11N_TXMAXTRY;
1605         hw->sta_data_size = sizeof(struct ath_node);
1606         hw->vif_data_size = sizeof(struct ath_vif);
1607
1608         hw->rate_control_algorithm = "ath9k_rate_control";
1609
1610         hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
1611                 &sc->sbands[IEEE80211_BAND_2GHZ];
1612         if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
1613                 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
1614                         &sc->sbands[IEEE80211_BAND_5GHZ];
1615 }
1616
1617 int ath_attach(u16 devid, struct ath_softc *sc)
1618 {
1619         struct ieee80211_hw *hw = sc->hw;
1620         const struct ieee80211_regdomain *regd;
1621         int error = 0, i;
1622
1623         DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
1624
1625         error = ath_init(devid, sc);
1626         if (error != 0)
1627                 return error;
1628
1629         /* get mac address from hardware and set in mac80211 */
1630
1631         SET_IEEE80211_PERM_ADDR(hw, sc->sc_ah->macaddr);
1632
1633         ath_set_hw_capab(sc, hw);
1634
1635         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
1636                 setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
1637                 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
1638                         setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
1639         }
1640
1641         /* initialize tx/rx engine */
1642         error = ath_tx_init(sc, ATH_TXBUF);
1643         if (error != 0)
1644                 goto error_attach;
1645
1646         error = ath_rx_init(sc, ATH_RXBUF);
1647         if (error != 0)
1648                 goto error_attach;
1649
1650 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1651         /* Initialze h/w Rfkill */
1652         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1653                 INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
1654
1655         /* Initialize s/w rfkill */
1656         error = ath_init_sw_rfkill(sc);
1657         if (error)
1658                 goto error_attach;
1659 #endif
1660
1661         if (ath9k_is_world_regd(sc->sc_ah)) {
1662                 /* Anything applied here (prior to wiphy registration) gets
1663                  * saved on the wiphy orig_* parameters */
1664                 regd = ath9k_world_regdomain(sc->sc_ah);
1665                 hw->wiphy->custom_regulatory = true;
1666                 hw->wiphy->strict_regulatory = false;
1667         } else {
1668                 /* This gets applied in the case of the absense of CRDA,
1669                  * it's our own custom world regulatory domain, similar to
1670                  * cfg80211's but we enable passive scanning */
1671                 regd = ath9k_default_world_regdomain();
1672         }
1673         wiphy_apply_custom_regulatory(hw->wiphy, regd);
1674         ath9k_reg_apply_radar_flags(hw->wiphy);
1675         ath9k_reg_apply_world_flags(hw->wiphy, NL80211_REGDOM_SET_BY_DRIVER);
1676
1677         INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
1678         INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
1679         sc->wiphy_scheduler_int = msecs_to_jiffies(500);
1680
1681         error = ieee80211_register_hw(hw);
1682
1683         if (!ath9k_is_world_regd(sc->sc_ah)) {
1684                 error = regulatory_hint(hw->wiphy,
1685                         sc->sc_ah->regulatory.alpha2);
1686                 if (error)
1687                         goto error_attach;
1688         }
1689
1690         /* Initialize LED control */
1691         ath_init_leds(sc);
1692
1693
1694         return 0;
1695
1696 error_attach:
1697         /* cleanup tx queues */
1698         for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1699                 if (ATH_TXQ_SETUP(sc, i))
1700                         ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1701
1702         ath9k_hw_detach(sc->sc_ah);
1703         ath9k_exit_debug(sc);
1704
1705         return error;
1706 }
1707
1708 int ath_reset(struct ath_softc *sc, bool retry_tx)
1709 {
1710         struct ath_hw *ah = sc->sc_ah;
1711         struct ieee80211_hw *hw = sc->hw;
1712         int r;
1713
1714         ath9k_hw_set_interrupts(ah, 0);
1715         ath_drain_all_txq(sc, retry_tx);
1716         ath_stoprecv(sc);
1717         ath_flushrecv(sc);
1718
1719         spin_lock_bh(&sc->sc_resetlock);
1720         r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
1721         if (r)
1722                 DPRINTF(sc, ATH_DBG_FATAL,
1723                         "Unable to reset hardware; reset status %u\n", r);
1724         spin_unlock_bh(&sc->sc_resetlock);
1725
1726         if (ath_startrecv(sc) != 0)
1727                 DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
1728
1729         /*
1730          * We may be doing a reset in response to a request
1731          * that changes the channel so update any state that
1732          * might change as a result.
1733          */
1734         ath_cache_conf_rate(sc, &hw->conf);
1735
1736         ath_update_txpow(sc);
1737
1738         if (sc->sc_flags & SC_OP_BEACONS)
1739                 ath_beacon_config(sc, NULL);    /* restart beacons */
1740
1741         ath9k_hw_set_interrupts(ah, sc->imask);
1742
1743         if (retry_tx) {
1744                 int i;
1745                 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1746                         if (ATH_TXQ_SETUP(sc, i)) {
1747                                 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1748                                 ath_txq_schedule(sc, &sc->tx.txq[i]);
1749                                 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1750                         }
1751                 }
1752         }
1753
1754         return r;
1755 }
1756
1757 /*
1758  *  This function will allocate both the DMA descriptor structure, and the
1759  *  buffers it contains.  These are used to contain the descriptors used
1760  *  by the system.
1761 */
1762 int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
1763                       struct list_head *head, const char *name,
1764                       int nbuf, int ndesc)
1765 {
1766 #define DS2PHYS(_dd, _ds)                                               \
1767         ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
1768 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
1769 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
1770
1771         struct ath_desc *ds;
1772         struct ath_buf *bf;
1773         int i, bsize, error;
1774
1775         DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
1776                 name, nbuf, ndesc);
1777
1778         INIT_LIST_HEAD(head);
1779         /* ath_desc must be a multiple of DWORDs */
1780         if ((sizeof(struct ath_desc) % 4) != 0) {
1781                 DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n");
1782                 ASSERT((sizeof(struct ath_desc) % 4) == 0);
1783                 error = -ENOMEM;
1784                 goto fail;
1785         }
1786
1787         dd->dd_name = name;
1788         dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
1789
1790         /*
1791          * Need additional DMA memory because we can't use
1792          * descriptors that cross the 4K page boundary. Assume
1793          * one skipped descriptor per 4K page.
1794          */
1795         if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1796                 u32 ndesc_skipped =
1797                         ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
1798                 u32 dma_len;
1799
1800                 while (ndesc_skipped) {
1801                         dma_len = ndesc_skipped * sizeof(struct ath_desc);
1802                         dd->dd_desc_len += dma_len;
1803
1804                         ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
1805                 };
1806         }
1807
1808         /* allocate descriptors */
1809         dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
1810                                          &dd->dd_desc_paddr, GFP_KERNEL);
1811         if (dd->dd_desc == NULL) {
1812                 error = -ENOMEM;
1813                 goto fail;
1814         }
1815         ds = dd->dd_desc;
1816         DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
1817                 dd->dd_name, ds, (u32) dd->dd_desc_len,
1818                 ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
1819
1820         /* allocate buffers */
1821         bsize = sizeof(struct ath_buf) * nbuf;
1822         bf = kzalloc(bsize, GFP_KERNEL);
1823         if (bf == NULL) {
1824                 error = -ENOMEM;
1825                 goto fail2;
1826         }
1827         dd->dd_bufptr = bf;
1828
1829         for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
1830                 bf->bf_desc = ds;
1831                 bf->bf_daddr = DS2PHYS(dd, ds);
1832
1833                 if (!(sc->sc_ah->caps.hw_caps &
1834                       ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1835                         /*
1836                          * Skip descriptor addresses which can cause 4KB
1837                          * boundary crossing (addr + length) with a 32 dword
1838                          * descriptor fetch.
1839                          */
1840                         while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
1841                                 ASSERT((caddr_t) bf->bf_desc <
1842                                        ((caddr_t) dd->dd_desc +
1843                                         dd->dd_desc_len));
1844
1845                                 ds += ndesc;
1846                                 bf->bf_desc = ds;
1847                                 bf->bf_daddr = DS2PHYS(dd, ds);
1848                         }
1849                 }
1850                 list_add_tail(&bf->list, head);
1851         }
1852         return 0;
1853 fail2:
1854         dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
1855                           dd->dd_desc_paddr);
1856 fail:
1857         memset(dd, 0, sizeof(*dd));
1858         return error;
1859 #undef ATH_DESC_4KB_BOUND_CHECK
1860 #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
1861 #undef DS2PHYS
1862 }
1863
1864 void ath_descdma_cleanup(struct ath_softc *sc,
1865                          struct ath_descdma *dd,
1866                          struct list_head *head)
1867 {
1868         dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
1869                           dd->dd_desc_paddr);
1870
1871         INIT_LIST_HEAD(head);
1872         kfree(dd->dd_bufptr);
1873         memset(dd, 0, sizeof(*dd));
1874 }
1875
1876 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
1877 {
1878         int qnum;
1879
1880         switch (queue) {
1881         case 0:
1882                 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO];
1883                 break;
1884         case 1:
1885                 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI];
1886                 break;
1887         case 2:
1888                 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1889                 break;
1890         case 3:
1891                 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK];
1892                 break;
1893         default:
1894                 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1895                 break;
1896         }
1897
1898         return qnum;
1899 }
1900
1901 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
1902 {
1903         int qnum;
1904
1905         switch (queue) {
1906         case ATH9K_WME_AC_VO:
1907                 qnum = 0;
1908                 break;
1909         case ATH9K_WME_AC_VI:
1910                 qnum = 1;
1911                 break;
1912         case ATH9K_WME_AC_BE:
1913                 qnum = 2;
1914                 break;
1915         case ATH9K_WME_AC_BK:
1916                 qnum = 3;
1917                 break;
1918         default:
1919                 qnum = -1;
1920                 break;
1921         }
1922
1923         return qnum;
1924 }
1925
1926 /* XXX: Remove me once we don't depend on ath9k_channel for all
1927  * this redundant data */
1928 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1929                            struct ath9k_channel *ichan)
1930 {
1931         struct ieee80211_channel *chan = hw->conf.channel;
1932         struct ieee80211_conf *conf = &hw->conf;
1933
1934         ichan->channel = chan->center_freq;
1935         ichan->chan = chan;
1936
1937         if (chan->band == IEEE80211_BAND_2GHZ) {
1938                 ichan->chanmode = CHANNEL_G;
1939                 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
1940         } else {
1941                 ichan->chanmode = CHANNEL_A;
1942                 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1943         }
1944
1945         sc->tx_chan_width = ATH9K_HT_MACMODE_20;
1946
1947         if (conf_is_ht(conf)) {
1948                 if (conf_is_ht40(conf))
1949                         sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
1950
1951                 ichan->chanmode = ath_get_extchanmode(sc, chan,
1952                                             conf->channel_type);
1953         }
1954 }
1955
1956 /**********************/
1957 /* mac80211 callbacks */
1958 /**********************/
1959
1960 static int ath9k_start(struct ieee80211_hw *hw)
1961 {
1962         struct ath_wiphy *aphy = hw->priv;
1963         struct ath_softc *sc = aphy->sc;
1964         struct ieee80211_channel *curchan = hw->conf.channel;
1965         struct ath9k_channel *init_channel;
1966         int r, pos;
1967
1968         DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
1969                 "initial channel: %d MHz\n", curchan->center_freq);
1970
1971         mutex_lock(&sc->mutex);
1972
1973         if (ath9k_wiphy_started(sc)) {
1974                 if (sc->chan_idx == curchan->hw_value) {
1975                         /*
1976                          * Already on the operational channel, the new wiphy
1977                          * can be marked active.
1978                          */
1979                         aphy->state = ATH_WIPHY_ACTIVE;
1980                         ieee80211_wake_queues(hw);
1981                 } else {
1982                         /*
1983                          * Another wiphy is on another channel, start the new
1984                          * wiphy in paused state.
1985                          */
1986                         aphy->state = ATH_WIPHY_PAUSED;
1987                         ieee80211_stop_queues(hw);
1988                 }
1989                 mutex_unlock(&sc->mutex);
1990                 return 0;
1991         }
1992         aphy->state = ATH_WIPHY_ACTIVE;
1993
1994         /* setup initial channel */
1995
1996         pos = curchan->hw_value;
1997
1998         sc->chan_idx = pos;
1999         init_channel = &sc->sc_ah->channels[pos];
2000         ath9k_update_ichannel(sc, hw, init_channel);
2001
2002         /* Reset SERDES registers */
2003         ath9k_hw_configpcipowersave(sc->sc_ah, 0);
2004
2005         /*
2006          * The basic interface to setting the hardware in a good
2007          * state is ``reset''.  On return the hardware is known to
2008          * be powered up and with interrupts disabled.  This must
2009          * be followed by initialization of the appropriate bits
2010          * and then setup of the interrupt mask.
2011          */
2012         spin_lock_bh(&sc->sc_resetlock);
2013         r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
2014         if (r) {
2015                 DPRINTF(sc, ATH_DBG_FATAL,
2016                         "Unable to reset hardware; reset status %u "
2017                         "(freq %u MHz)\n", r,
2018                         curchan->center_freq);
2019                 spin_unlock_bh(&sc->sc_resetlock);
2020                 goto mutex_unlock;
2021         }
2022         spin_unlock_bh(&sc->sc_resetlock);
2023
2024         /*
2025          * This is needed only to setup initial state
2026          * but it's best done after a reset.
2027          */
2028         ath_update_txpow(sc);
2029
2030         /*
2031          * Setup the hardware after reset:
2032          * The receive engine is set going.
2033          * Frame transmit is handled entirely
2034          * in the frame output path; there's nothing to do
2035          * here except setup the interrupt mask.
2036          */
2037         if (ath_startrecv(sc) != 0) {
2038                 DPRINTF(sc, ATH_DBG_FATAL,
2039                         "Unable to start recv logic\n");
2040                 r = -EIO;
2041                 goto mutex_unlock;
2042         }
2043
2044         /* Setup our intr mask. */
2045         sc->imask = ATH9K_INT_RX | ATH9K_INT_TX
2046                 | ATH9K_INT_RXEOL | ATH9K_INT_RXORN
2047                 | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
2048
2049         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
2050                 sc->imask |= ATH9K_INT_GTT;
2051
2052         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
2053                 sc->imask |= ATH9K_INT_CST;
2054
2055         ath_cache_conf_rate(sc, &hw->conf);
2056
2057         sc->sc_flags &= ~SC_OP_INVALID;
2058
2059         /* Disable BMISS interrupt when we're not associated */
2060         sc->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
2061         ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
2062
2063         ieee80211_wake_queues(hw);
2064
2065 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2066         r = ath_start_rfkill_poll(sc);
2067 #endif
2068
2069 mutex_unlock:
2070         mutex_unlock(&sc->mutex);
2071
2072         return r;
2073 }
2074
2075 static int ath9k_tx(struct ieee80211_hw *hw,
2076                     struct sk_buff *skb)
2077 {
2078         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2079         struct ath_wiphy *aphy = hw->priv;
2080         struct ath_softc *sc = aphy->sc;
2081         struct ath_tx_control txctl;
2082         int hdrlen, padsize;
2083
2084         if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
2085                 printk(KERN_DEBUG "ath9k: %s: TX in unexpected wiphy state "
2086                        "%d\n", wiphy_name(hw->wiphy), aphy->state);
2087                 goto exit;
2088         }
2089
2090         memset(&txctl, 0, sizeof(struct ath_tx_control));
2091
2092         /*
2093          * As a temporary workaround, assign seq# here; this will likely need
2094          * to be cleaned up to work better with Beacon transmission and virtual
2095          * BSSes.
2096          */
2097         if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
2098                 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2099                 if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
2100                         sc->tx.seq_no += 0x10;
2101                 hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
2102                 hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
2103         }
2104
2105         /* Add the padding after the header if this is not already done */
2106         hdrlen = ieee80211_get_hdrlen_from_skb(skb);
2107         if (hdrlen & 3) {
2108                 padsize = hdrlen % 4;
2109                 if (skb_headroom(skb) < padsize)
2110                         return -1;
2111                 skb_push(skb, padsize);
2112                 memmove(skb->data, skb->data + padsize, hdrlen);
2113         }
2114
2115         /* Check if a tx queue is available */
2116
2117         txctl.txq = ath_test_get_txq(sc, skb);
2118         if (!txctl.txq)
2119                 goto exit;
2120
2121         DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
2122
2123         if (ath_tx_start(hw, skb, &txctl) != 0) {
2124                 DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n");
2125                 goto exit;
2126         }
2127
2128         return 0;
2129 exit:
2130         dev_kfree_skb_any(skb);
2131         return 0;
2132 }
2133
2134 static void ath9k_stop(struct ieee80211_hw *hw)
2135 {
2136         struct ath_wiphy *aphy = hw->priv;
2137         struct ath_softc *sc = aphy->sc;
2138
2139         aphy->state = ATH_WIPHY_INACTIVE;
2140
2141         if (sc->sc_flags & SC_OP_INVALID) {
2142                 DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
2143                 return;
2144         }
2145
2146         mutex_lock(&sc->mutex);
2147
2148         ieee80211_stop_queues(hw);
2149
2150         if (ath9k_wiphy_started(sc)) {
2151                 mutex_unlock(&sc->mutex);
2152                 return; /* another wiphy still in use */
2153         }
2154
2155         /* make sure h/w will not generate any interrupt
2156          * before setting the invalid flag. */
2157         ath9k_hw_set_interrupts(sc->sc_ah, 0);
2158
2159         if (!(sc->sc_flags & SC_OP_INVALID)) {
2160                 ath_drain_all_txq(sc, false);
2161                 ath_stoprecv(sc);
2162                 ath9k_hw_phy_disable(sc->sc_ah);
2163         } else
2164                 sc->rx.rxlink = NULL;
2165
2166 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2167         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
2168                 cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
2169 #endif
2170         /* disable HAL and put h/w to sleep */
2171         ath9k_hw_disable(sc->sc_ah);
2172         ath9k_hw_configpcipowersave(sc->sc_ah, 1);
2173
2174         sc->sc_flags |= SC_OP_INVALID;
2175
2176         mutex_unlock(&sc->mutex);
2177
2178         DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n");
2179 }
2180
2181 static int ath9k_add_interface(struct ieee80211_hw *hw,
2182                                struct ieee80211_if_init_conf *conf)
2183 {
2184         struct ath_wiphy *aphy = hw->priv;
2185         struct ath_softc *sc = aphy->sc;
2186         struct ath_vif *avp = (void *)conf->vif->drv_priv;
2187         enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
2188         int ret = 0;
2189
2190         mutex_lock(&sc->mutex);
2191
2192         if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) &&
2193             sc->nvifs > 0) {
2194                 ret = -ENOBUFS;
2195                 goto out;
2196         }
2197
2198         switch (conf->type) {
2199         case NL80211_IFTYPE_STATION:
2200                 ic_opmode = NL80211_IFTYPE_STATION;
2201                 break;
2202         case NL80211_IFTYPE_ADHOC:
2203                 if (sc->nbcnvifs >= ATH_BCBUF) {
2204                         ret = -ENOBUFS;
2205                         goto out;
2206                 }
2207                 ic_opmode = NL80211_IFTYPE_ADHOC;
2208                 break;
2209         case NL80211_IFTYPE_AP:
2210                 if (sc->nbcnvifs >= ATH_BCBUF) {
2211                         ret = -ENOBUFS;
2212                         goto out;
2213                 }
2214                 ic_opmode = NL80211_IFTYPE_AP;
2215                 break;
2216         default:
2217                 DPRINTF(sc, ATH_DBG_FATAL,
2218                         "Interface type %d not yet supported\n", conf->type);
2219                 ret = -EOPNOTSUPP;
2220                 goto out;
2221         }
2222
2223         DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VIF of type: %d\n", ic_opmode);
2224
2225         /* Set the VIF opmode */
2226         avp->av_opmode = ic_opmode;
2227         avp->av_bslot = -1;
2228
2229         sc->nvifs++;
2230
2231         if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
2232                 ath9k_set_bssid_mask(hw);
2233
2234         if (sc->nvifs > 1)
2235                 goto out; /* skip global settings for secondary vif */
2236
2237         if (ic_opmode == NL80211_IFTYPE_AP) {
2238                 ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
2239                 sc->sc_flags |= SC_OP_TSF_RESET;
2240         }
2241
2242         /* Set the device opmode */
2243         sc->sc_ah->opmode = ic_opmode;
2244
2245         /*
2246          * Enable MIB interrupts when there are hardware phy counters.
2247          * Note we only do this (at the moment) for station mode.
2248          */
2249         if ((conf->type == NL80211_IFTYPE_STATION) ||
2250             (conf->type == NL80211_IFTYPE_ADHOC)) {
2251                 if (ath9k_hw_phycounters(sc->sc_ah))
2252                         sc->imask |= ATH9K_INT_MIB;
2253                 sc->imask |= ATH9K_INT_TSFOOR;
2254         }
2255
2256         /*
2257          * Some hardware processes the TIM IE and fires an
2258          * interrupt when the TIM bit is set.  For hardware
2259          * that does, if not overridden by configuration,
2260          * enable the TIM interrupt when operating as station.
2261          */
2262         if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
2263             (conf->type == NL80211_IFTYPE_STATION) &&
2264             !sc->config.swBeaconProcess)
2265                 sc->imask |= ATH9K_INT_TIM;
2266
2267         ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
2268
2269         if (conf->type == NL80211_IFTYPE_AP) {
2270                 /* TODO: is this a suitable place to start ANI for AP mode? */
2271                 /* Start ANI */
2272                 mod_timer(&sc->ani.timer,
2273                           jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
2274         }
2275
2276 out:
2277         mutex_unlock(&sc->mutex);
2278         return ret;
2279 }
2280
2281 static void ath9k_remove_interface(struct ieee80211_hw *hw,
2282                                    struct ieee80211_if_init_conf *conf)
2283 {
2284         struct ath_wiphy *aphy = hw->priv;
2285         struct ath_softc *sc = aphy->sc;
2286         struct ath_vif *avp = (void *)conf->vif->drv_priv;
2287         int i;
2288
2289         DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
2290
2291         mutex_lock(&sc->mutex);
2292
2293         /* Stop ANI */
2294         del_timer_sync(&sc->ani.timer);
2295
2296         /* Reclaim beacon resources */
2297         if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
2298             sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) {
2299                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2300                 ath_beacon_return(sc, avp);
2301         }
2302
2303         sc->sc_flags &= ~SC_OP_BEACONS;
2304
2305         for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
2306                 if (sc->beacon.bslot[i] == conf->vif) {
2307                         printk(KERN_DEBUG "%s: vif had allocated beacon "
2308                                "slot\n", __func__);
2309                         sc->beacon.bslot[i] = NULL;
2310                         sc->beacon.bslot_aphy[i] = NULL;
2311                 }
2312         }
2313
2314         sc->nvifs--;
2315
2316         mutex_unlock(&sc->mutex);
2317 }
2318
2319 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
2320 {
2321         struct ath_wiphy *aphy = hw->priv;
2322         struct ath_softc *sc = aphy->sc;
2323         struct ieee80211_conf *conf = &hw->conf;
2324
2325         mutex_lock(&sc->mutex);
2326
2327         if (changed & IEEE80211_CONF_CHANGE_PS) {
2328                 if (conf->flags & IEEE80211_CONF_PS) {
2329                         if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
2330                                 sc->imask |= ATH9K_INT_TIM_TIMER;
2331                                 ath9k_hw_set_interrupts(sc->sc_ah,
2332                                                 sc->imask);
2333                         }
2334                         ath9k_hw_setrxabort(sc->sc_ah, 1);
2335                         ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
2336                 } else {
2337                         ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
2338                         ath9k_hw_setrxabort(sc->sc_ah, 0);
2339                         sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
2340                         if (sc->imask & ATH9K_INT_TIM_TIMER) {
2341                                 sc->imask &= ~ATH9K_INT_TIM_TIMER;
2342                                 ath9k_hw_set_interrupts(sc->sc_ah,
2343                                                 sc->imask);
2344                         }
2345                 }
2346         }
2347
2348         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
2349                 struct ieee80211_channel *curchan = hw->conf.channel;
2350                 int pos = curchan->hw_value;
2351
2352                 aphy->chan_idx = pos;
2353                 aphy->chan_is_ht = conf_is_ht(conf);
2354
2355                 if (aphy->state == ATH_WIPHY_SCAN ||
2356                     aphy->state == ATH_WIPHY_ACTIVE)
2357                         ath9k_wiphy_pause_all_forced(sc, aphy);
2358                 else {
2359                         /*
2360                          * Do not change operational channel based on a paused
2361                          * wiphy changes.
2362                          */
2363                         goto skip_chan_change;
2364                 }
2365
2366                 DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
2367                         curchan->center_freq);
2368
2369                 /* XXX: remove me eventualy */
2370                 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
2371
2372                 ath_update_chainmask(sc, conf_is_ht(conf));
2373
2374                 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
2375                         DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
2376                         mutex_unlock(&sc->mutex);
2377                         return -EINVAL;
2378                 }
2379         }
2380
2381 skip_chan_change:
2382         if (changed & IEEE80211_CONF_CHANGE_POWER)
2383                 sc->config.txpowlimit = 2 * conf->power_level;
2384
2385         /*
2386          * The HW TSF has to be reset when the beacon interval changes.
2387          * We set the flag here, and ath_beacon_config_ap() would take this
2388          * into account when it gets called through the subsequent
2389          * config_interface() call - with IFCC_BEACON in the changed field.
2390          */
2391
2392         if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
2393                 sc->sc_flags |= SC_OP_TSF_RESET;
2394
2395         mutex_unlock(&sc->mutex);
2396
2397         return 0;
2398 }
2399
2400 static int ath9k_config_interface(struct ieee80211_hw *hw,
2401                                   struct ieee80211_vif *vif,
2402                                   struct ieee80211_if_conf *conf)
2403 {
2404         struct ath_wiphy *aphy = hw->priv;
2405         struct ath_softc *sc = aphy->sc;
2406         struct ath_hw *ah = sc->sc_ah;
2407         struct ath_vif *avp = (void *)vif->drv_priv;
2408         u32 rfilt = 0;
2409         int error, i;
2410
2411         mutex_lock(&sc->mutex);
2412
2413         /* TODO: Need to decide which hw opmode to use for multi-interface
2414          * cases */
2415         if (vif->type == NL80211_IFTYPE_AP &&
2416             ah->opmode != NL80211_IFTYPE_AP) {
2417                 ah->opmode = NL80211_IFTYPE_STATION;
2418                 ath9k_hw_setopmode(ah);
2419                 memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
2420                 sc->curaid = 0;
2421                 ath9k_hw_write_associd(sc);
2422                 /* Request full reset to get hw opmode changed properly */
2423                 sc->sc_flags |= SC_OP_FULL_RESET;
2424         }
2425
2426         if ((conf->changed & IEEE80211_IFCC_BSSID) &&
2427             !is_zero_ether_addr(conf->bssid)) {
2428                 switch (vif->type) {
2429                 case NL80211_IFTYPE_STATION:
2430                 case NL80211_IFTYPE_ADHOC:
2431                         /* Set BSSID */
2432                         memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
2433                         memcpy(avp->bssid, conf->bssid, ETH_ALEN);
2434                         sc->curaid = 0;
2435                         ath9k_hw_write_associd(sc);
2436
2437                         /* Set aggregation protection mode parameters */
2438                         sc->config.ath_aggr_prot = 0;
2439
2440                         DPRINTF(sc, ATH_DBG_CONFIG,
2441                                 "RX filter 0x%x bssid %pM aid 0x%x\n",
2442                                 rfilt, sc->curbssid, sc->curaid);
2443
2444                         /* need to reconfigure the beacon */
2445                         sc->sc_flags &= ~SC_OP_BEACONS ;
2446
2447                         break;
2448                 default:
2449                         break;
2450                 }
2451         }
2452
2453         if ((vif->type == NL80211_IFTYPE_ADHOC) ||
2454             (vif->type == NL80211_IFTYPE_AP)) {
2455                 if ((conf->changed & IEEE80211_IFCC_BEACON) ||
2456                     (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
2457                      conf->enable_beacon)) {
2458                         /*
2459                          * Allocate and setup the beacon frame.
2460                          *
2461                          * Stop any previous beacon DMA.  This may be
2462                          * necessary, for example, when an ibss merge
2463                          * causes reconfiguration; we may be called
2464                          * with beacon transmission active.
2465                          */
2466                         ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2467
2468                         error = ath_beacon_alloc(aphy, vif);
2469                         if (error != 0) {
2470                                 mutex_unlock(&sc->mutex);
2471                                 return error;
2472                         }
2473
2474                         ath_beacon_config(sc, vif);
2475                 }
2476         }
2477
2478         /* Check for WLAN_CAPABILITY_PRIVACY ? */
2479         if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
2480                 for (i = 0; i < IEEE80211_WEP_NKID; i++)
2481                         if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
2482                                 ath9k_hw_keysetmac(sc->sc_ah,
2483                                                    (u16)i,
2484                                                    sc->curbssid);
2485         }
2486
2487         /* Only legacy IBSS for now */
2488         if (vif->type == NL80211_IFTYPE_ADHOC)
2489                 ath_update_chainmask(sc, 0);
2490
2491         mutex_unlock(&sc->mutex);
2492
2493         return 0;
2494 }
2495
2496 #define SUPPORTED_FILTERS                       \
2497         (FIF_PROMISC_IN_BSS |                   \
2498         FIF_ALLMULTI |                          \
2499         FIF_CONTROL |                           \
2500         FIF_OTHER_BSS |                         \
2501         FIF_BCN_PRBRESP_PROMISC |               \
2502         FIF_FCSFAIL)
2503
2504 /* FIXME: sc->sc_full_reset ? */
2505 static void ath9k_configure_filter(struct ieee80211_hw *hw,
2506                                    unsigned int changed_flags,
2507                                    unsigned int *total_flags,
2508                                    int mc_count,
2509                                    struct dev_mc_list *mclist)
2510 {
2511         struct ath_wiphy *aphy = hw->priv;
2512         struct ath_softc *sc = aphy->sc;
2513         u32 rfilt;
2514
2515         changed_flags &= SUPPORTED_FILTERS;
2516         *total_flags &= SUPPORTED_FILTERS;
2517
2518         sc->rx.rxfilter = *total_flags;
2519         rfilt = ath_calcrxfilter(sc);
2520         ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
2521
2522         DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
2523 }
2524
2525 static void ath9k_sta_notify(struct ieee80211_hw *hw,
2526                              struct ieee80211_vif *vif,
2527                              enum sta_notify_cmd cmd,
2528                              struct ieee80211_sta *sta)
2529 {
2530         struct ath_wiphy *aphy = hw->priv;
2531         struct ath_softc *sc = aphy->sc;
2532
2533         switch (cmd) {
2534         case STA_NOTIFY_ADD:
2535                 ath_node_attach(sc, sta);
2536                 break;
2537         case STA_NOTIFY_REMOVE:
2538                 ath_node_detach(sc, sta);
2539                 break;
2540         default:
2541                 break;
2542         }
2543 }
2544
2545 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
2546                          const struct ieee80211_tx_queue_params *params)
2547 {
2548         struct ath_wiphy *aphy = hw->priv;
2549         struct ath_softc *sc = aphy->sc;
2550         struct ath9k_tx_queue_info qi;
2551         int ret = 0, qnum;
2552
2553         if (queue >= WME_NUM_AC)
2554                 return 0;
2555
2556         mutex_lock(&sc->mutex);
2557
2558         qi.tqi_aifs = params->aifs;
2559         qi.tqi_cwmin = params->cw_min;
2560         qi.tqi_cwmax = params->cw_max;
2561         qi.tqi_burstTime = params->txop;
2562         qnum = ath_get_hal_qnum(queue, sc);
2563
2564         DPRINTF(sc, ATH_DBG_CONFIG,
2565                 "Configure tx [queue/halq] [%d/%d],  "
2566                 "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
2567                 queue, qnum, params->aifs, params->cw_min,
2568                 params->cw_max, params->txop);
2569
2570         ret = ath_txq_update(sc, qnum, &qi);
2571         if (ret)
2572                 DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n");
2573
2574         mutex_unlock(&sc->mutex);
2575
2576         return ret;
2577 }
2578
2579 static int ath9k_set_key(struct ieee80211_hw *hw,
2580                          enum set_key_cmd cmd,
2581                          struct ieee80211_vif *vif,
2582                          struct ieee80211_sta *sta,
2583                          struct ieee80211_key_conf *key)
2584 {
2585         struct ath_wiphy *aphy = hw->priv;
2586         struct ath_softc *sc = aphy->sc;
2587         int ret = 0;
2588
2589         if (modparam_nohwcrypt)
2590                 return -ENOSPC;
2591
2592         mutex_lock(&sc->mutex);
2593         ath9k_ps_wakeup(sc);
2594         DPRINTF(sc, ATH_DBG_KEYCACHE, "Set HW Key\n");
2595
2596         switch (cmd) {
2597         case SET_KEY:
2598                 ret = ath_key_config(sc, vif, sta, key);
2599                 if (ret >= 0) {
2600                         key->hw_key_idx = ret;
2601                         /* push IV and Michael MIC generation to stack */
2602                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
2603                         if (key->alg == ALG_TKIP)
2604                                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
2605                         if (sc->sc_ah->sw_mgmt_crypto && key->alg == ALG_CCMP)
2606                                 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
2607                         ret = 0;
2608                 }
2609                 break;
2610         case DISABLE_KEY:
2611                 ath_key_delete(sc, key);
2612                 break;
2613         default:
2614                 ret = -EINVAL;
2615         }
2616
2617         ath9k_ps_restore(sc);
2618         mutex_unlock(&sc->mutex);
2619
2620         return ret;
2621 }
2622
2623 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
2624                                    struct ieee80211_vif *vif,
2625                                    struct ieee80211_bss_conf *bss_conf,
2626                                    u32 changed)
2627 {
2628         struct ath_wiphy *aphy = hw->priv;
2629         struct ath_softc *sc = aphy->sc;
2630
2631         mutex_lock(&sc->mutex);
2632
2633         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
2634                 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
2635                         bss_conf->use_short_preamble);
2636                 if (bss_conf->use_short_preamble)
2637                         sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
2638                 else
2639                         sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
2640         }
2641
2642         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
2643                 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
2644                         bss_conf->use_cts_prot);
2645                 if (bss_conf->use_cts_prot &&
2646                     hw->conf.channel->band != IEEE80211_BAND_5GHZ)
2647                         sc->sc_flags |= SC_OP_PROTECT_ENABLE;
2648                 else
2649                         sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
2650         }
2651
2652         if (changed & BSS_CHANGED_ASSOC) {
2653                 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
2654                         bss_conf->assoc);
2655                 ath9k_bss_assoc_info(sc, vif, bss_conf);
2656         }
2657
2658         mutex_unlock(&sc->mutex);
2659 }
2660
2661 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
2662 {
2663         u64 tsf;
2664         struct ath_wiphy *aphy = hw->priv;
2665         struct ath_softc *sc = aphy->sc;
2666
2667         mutex_lock(&sc->mutex);
2668         tsf = ath9k_hw_gettsf64(sc->sc_ah);
2669         mutex_unlock(&sc->mutex);
2670
2671         return tsf;
2672 }
2673
2674 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
2675 {
2676         struct ath_wiphy *aphy = hw->priv;
2677         struct ath_softc *sc = aphy->sc;
2678
2679         mutex_lock(&sc->mutex);
2680         ath9k_hw_settsf64(sc->sc_ah, tsf);
2681         mutex_unlock(&sc->mutex);
2682 }
2683
2684 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
2685 {
2686         struct ath_wiphy *aphy = hw->priv;
2687         struct ath_softc *sc = aphy->sc;
2688
2689         mutex_lock(&sc->mutex);
2690         ath9k_hw_reset_tsf(sc->sc_ah);
2691         mutex_unlock(&sc->mutex);
2692 }
2693
2694 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
2695                               enum ieee80211_ampdu_mlme_action action,
2696                               struct ieee80211_sta *sta,
2697                               u16 tid, u16 *ssn)
2698 {
2699         struct ath_wiphy *aphy = hw->priv;
2700         struct ath_softc *sc = aphy->sc;
2701         int ret = 0;
2702
2703         switch (action) {
2704         case IEEE80211_AMPDU_RX_START:
2705                 if (!(sc->sc_flags & SC_OP_RXAGGR))
2706                         ret = -ENOTSUPP;
2707                 break;
2708         case IEEE80211_AMPDU_RX_STOP:
2709                 break;
2710         case IEEE80211_AMPDU_TX_START:
2711                 ret = ath_tx_aggr_start(sc, sta, tid, ssn);
2712                 if (ret < 0)
2713                         DPRINTF(sc, ATH_DBG_FATAL,
2714                                 "Unable to start TX aggregation\n");
2715                 else
2716                         ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2717                 break;
2718         case IEEE80211_AMPDU_TX_STOP:
2719                 ret = ath_tx_aggr_stop(sc, sta, tid);
2720                 if (ret < 0)
2721                         DPRINTF(sc, ATH_DBG_FATAL,
2722                                 "Unable to stop TX aggregation\n");
2723
2724                 ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2725                 break;
2726         case IEEE80211_AMPDU_TX_RESUME:
2727                 ath_tx_aggr_resume(sc, sta, tid);
2728                 break;
2729         default:
2730                 DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n");
2731         }
2732
2733         return ret;
2734 }
2735
2736 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2737 {
2738         struct ath_wiphy *aphy = hw->priv;
2739         struct ath_softc *sc = aphy->sc;
2740
2741         if (ath9k_wiphy_scanning(sc)) {
2742                 printk(KERN_DEBUG "ath9k: Two wiphys trying to scan at the "
2743                        "same time\n");
2744                 /*
2745                  * Do not allow the concurrent scanning state for now. This
2746                  * could be improved with scanning control moved into ath9k.
2747                  */
2748                 return;
2749         }
2750
2751         aphy->state = ATH_WIPHY_SCAN;
2752         ath9k_wiphy_pause_all_forced(sc, aphy);
2753
2754         mutex_lock(&sc->mutex);
2755         sc->sc_flags |= SC_OP_SCANNING;
2756         mutex_unlock(&sc->mutex);
2757 }
2758
2759 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2760 {
2761         struct ath_wiphy *aphy = hw->priv;
2762         struct ath_softc *sc = aphy->sc;
2763
2764         mutex_lock(&sc->mutex);
2765         aphy->state = ATH_WIPHY_ACTIVE;
2766         sc->sc_flags &= ~SC_OP_SCANNING;
2767         mutex_unlock(&sc->mutex);
2768 }
2769
2770 struct ieee80211_ops ath9k_ops = {
2771         .tx                 = ath9k_tx,
2772         .start              = ath9k_start,
2773         .stop               = ath9k_stop,
2774         .add_interface      = ath9k_add_interface,
2775         .remove_interface   = ath9k_remove_interface,
2776         .config             = ath9k_config,
2777         .config_interface   = ath9k_config_interface,
2778         .configure_filter   = ath9k_configure_filter,
2779         .sta_notify         = ath9k_sta_notify,
2780         .conf_tx            = ath9k_conf_tx,
2781         .bss_info_changed   = ath9k_bss_info_changed,
2782         .set_key            = ath9k_set_key,
2783         .get_tsf            = ath9k_get_tsf,
2784         .set_tsf            = ath9k_set_tsf,
2785         .reset_tsf          = ath9k_reset_tsf,
2786         .ampdu_action       = ath9k_ampdu_action,
2787         .sw_scan_start      = ath9k_sw_scan_start,
2788         .sw_scan_complete   = ath9k_sw_scan_complete,
2789 };
2790
2791 static struct {
2792         u32 version;
2793         const char * name;
2794 } ath_mac_bb_names[] = {
2795         { AR_SREV_VERSION_5416_PCI,     "5416" },
2796         { AR_SREV_VERSION_5416_PCIE,    "5418" },
2797         { AR_SREV_VERSION_9100,         "9100" },
2798         { AR_SREV_VERSION_9160,         "9160" },
2799         { AR_SREV_VERSION_9280,         "9280" },
2800         { AR_SREV_VERSION_9285,         "9285" }
2801 };
2802
2803 static struct {
2804         u16 version;
2805         const char * name;
2806 } ath_rf_names[] = {
2807         { 0,                            "5133" },
2808         { AR_RAD5133_SREV_MAJOR,        "5133" },
2809         { AR_RAD5122_SREV_MAJOR,        "5122" },
2810         { AR_RAD2133_SREV_MAJOR,        "2133" },
2811         { AR_RAD2122_SREV_MAJOR,        "2122" }
2812 };
2813
2814 /*
2815  * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
2816  */
2817 const char *
2818 ath_mac_bb_name(u32 mac_bb_version)
2819 {
2820         int i;
2821
2822         for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
2823                 if (ath_mac_bb_names[i].version == mac_bb_version) {
2824                         return ath_mac_bb_names[i].name;
2825                 }
2826         }
2827
2828         return "????";
2829 }
2830
2831 /*
2832  * Return the RF name. "????" is returned if the RF is unknown.
2833  */
2834 const char *
2835 ath_rf_name(u16 rf_version)
2836 {
2837         int i;
2838
2839         for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
2840                 if (ath_rf_names[i].version == rf_version) {
2841                         return ath_rf_names[i].name;
2842                 }
2843         }
2844
2845         return "????";
2846 }
2847
2848 static int __init ath9k_init(void)
2849 {
2850         int error;
2851
2852         /* Register rate control algorithm */
2853         error = ath_rate_control_register();
2854         if (error != 0) {
2855                 printk(KERN_ERR
2856                         "ath9k: Unable to register rate control "
2857                         "algorithm: %d\n",
2858                         error);
2859                 goto err_out;
2860         }
2861
2862         error = ath9k_debug_create_root();
2863         if (error) {
2864                 printk(KERN_ERR
2865                         "ath9k: Unable to create debugfs root: %d\n",
2866                         error);
2867                 goto err_rate_unregister;
2868         }
2869
2870         error = ath_pci_init();
2871         if (error < 0) {
2872                 printk(KERN_ERR
2873                         "ath9k: No PCI devices found, driver not installed.\n");
2874                 error = -ENODEV;
2875                 goto err_remove_root;
2876         }
2877
2878         error = ath_ahb_init();
2879         if (error < 0) {
2880                 error = -ENODEV;
2881                 goto err_pci_exit;
2882         }
2883
2884         return 0;
2885
2886  err_pci_exit:
2887         ath_pci_exit();
2888
2889  err_remove_root:
2890         ath9k_debug_remove_root();
2891  err_rate_unregister:
2892         ath_rate_control_unregister();
2893  err_out:
2894         return error;
2895 }
2896 module_init(ath9k_init);
2897
2898 static void __exit ath9k_exit(void)
2899 {
2900         ath_ahb_exit();
2901         ath_pci_exit();
2902         ath9k_debug_remove_root();
2903         ath_rate_control_unregister();
2904         printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
2905 }
2906 module_exit(ath9k_exit);