sfc: Do not include unneeded headers
[safe/jmp/linux-2.6] / drivers / net / sfc / net_driver.h
1 /****************************************************************************
2  * Driver for Solarflare Solarstorm network controllers and boards
3  * Copyright 2005-2006 Fen Systems Ltd.
4  * Copyright 2005-2009 Solarflare Communications Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License version 2 as published
8  * by the Free Software Foundation, incorporated herein by reference.
9  */
10
11 /* Common definitions for all Efx net driver code */
12
13 #ifndef EFX_NET_DRIVER_H
14 #define EFX_NET_DRIVER_H
15
16 #include <linux/version.h>
17 #include <linux/netdevice.h>
18 #include <linux/etherdevice.h>
19 #include <linux/ethtool.h>
20 #include <linux/if_vlan.h>
21 #include <linux/mdio.h>
22 #include <linux/list.h>
23 #include <linux/pci.h>
24 #include <linux/device.h>
25 #include <linux/highmem.h>
26 #include <linux/workqueue.h>
27 #include <linux/i2c.h>
28
29 #include "enum.h"
30 #include "bitfield.h"
31
32 /**************************************************************************
33  *
34  * Build definitions
35  *
36  **************************************************************************/
37 #ifndef EFX_DRIVER_NAME
38 #define EFX_DRIVER_NAME "sfc"
39 #endif
40 #define EFX_DRIVER_VERSION      "3.0"
41
42 #ifdef EFX_ENABLE_DEBUG
43 #define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
44 #define EFX_WARN_ON_PARANOID(x) WARN_ON(x)
45 #else
46 #define EFX_BUG_ON_PARANOID(x) do {} while (0)
47 #define EFX_WARN_ON_PARANOID(x) do {} while (0)
48 #endif
49
50 /* Un-rate-limited logging */
51 #define EFX_ERR(efx, fmt, args...) \
52 dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
53
54 #define EFX_INFO(efx, fmt, args...) \
55 dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
56
57 #ifdef EFX_ENABLE_DEBUG
58 #define EFX_LOG(efx, fmt, args...) \
59 dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
60 #else
61 #define EFX_LOG(efx, fmt, args...) \
62 dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
63 #endif
64
65 #define EFX_TRACE(efx, fmt, args...) do {} while (0)
66
67 #define EFX_REGDUMP(efx, fmt, args...) do {} while (0)
68
69 /* Rate-limited logging */
70 #define EFX_ERR_RL(efx, fmt, args...) \
71 do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0)
72
73 #define EFX_INFO_RL(efx, fmt, args...) \
74 do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0)
75
76 #define EFX_LOG_RL(efx, fmt, args...) \
77 do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
78
79 /**************************************************************************
80  *
81  * Efx data structures
82  *
83  **************************************************************************/
84
85 #define EFX_MAX_CHANNELS 32
86 #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS
87
88 #define EFX_TX_QUEUE_OFFLOAD_CSUM       0
89 #define EFX_TX_QUEUE_NO_CSUM            1
90 #define EFX_TX_QUEUE_COUNT              2
91
92 /**
93  * struct efx_special_buffer - An Efx special buffer
94  * @addr: CPU base address of the buffer
95  * @dma_addr: DMA base address of the buffer
96  * @len: Buffer length, in bytes
97  * @index: Buffer index within controller;s buffer table
98  * @entries: Number of buffer table entries
99  *
100  * Special buffers are used for the event queues and the TX and RX
101  * descriptor queues for each channel.  They are *not* used for the
102  * actual transmit and receive buffers.
103  */
104 struct efx_special_buffer {
105         void *addr;
106         dma_addr_t dma_addr;
107         unsigned int len;
108         int index;
109         int entries;
110 };
111
112 enum efx_flush_state {
113         FLUSH_NONE,
114         FLUSH_PENDING,
115         FLUSH_FAILED,
116         FLUSH_DONE,
117 };
118
119 /**
120  * struct efx_tx_buffer - An Efx TX buffer
121  * @skb: The associated socket buffer.
122  *      Set only on the final fragment of a packet; %NULL for all other
123  *      fragments.  When this fragment completes, then we can free this
124  *      skb.
125  * @tsoh: The associated TSO header structure, or %NULL if this
126  *      buffer is not a TSO header.
127  * @dma_addr: DMA address of the fragment.
128  * @len: Length of this fragment.
129  *      This field is zero when the queue slot is empty.
130  * @continuation: True if this fragment is not the end of a packet.
131  * @unmap_single: True if pci_unmap_single should be used.
132  * @unmap_len: Length of this fragment to unmap
133  */
134 struct efx_tx_buffer {
135         const struct sk_buff *skb;
136         struct efx_tso_header *tsoh;
137         dma_addr_t dma_addr;
138         unsigned short len;
139         bool continuation;
140         bool unmap_single;
141         unsigned short unmap_len;
142 };
143
144 /**
145  * struct efx_tx_queue - An Efx TX queue
146  *
147  * This is a ring buffer of TX fragments.
148  * Since the TX completion path always executes on the same
149  * CPU and the xmit path can operate on different CPUs,
150  * performance is increased by ensuring that the completion
151  * path and the xmit path operate on different cache lines.
152  * This is particularly important if the xmit path is always
153  * executing on one CPU which is different from the completion
154  * path.  There is also a cache line for members which are
155  * read but not written on the fast path.
156  *
157  * @efx: The associated Efx NIC
158  * @queue: DMA queue number
159  * @channel: The associated channel
160  * @buffer: The software buffer ring
161  * @txd: The hardware descriptor ring
162  * @flushed: Used when handling queue flushing
163  * @read_count: Current read pointer.
164  *      This is the number of buffers that have been removed from both rings.
165  * @stopped: Stopped count.
166  *      Set if this TX queue is currently stopping its port.
167  * @insert_count: Current insert pointer
168  *      This is the number of buffers that have been added to the
169  *      software ring.
170  * @write_count: Current write pointer
171  *      This is the number of buffers that have been added to the
172  *      hardware ring.
173  * @old_read_count: The value of read_count when last checked.
174  *      This is here for performance reasons.  The xmit path will
175  *      only get the up-to-date value of read_count if this
176  *      variable indicates that the queue is full.  This is to
177  *      avoid cache-line ping-pong between the xmit path and the
178  *      completion path.
179  * @tso_headers_free: A list of TSO headers allocated for this TX queue
180  *      that are not in use, and so available for new TSO sends. The list
181  *      is protected by the TX queue lock.
182  * @tso_bursts: Number of times TSO xmit invoked by kernel
183  * @tso_long_headers: Number of packets with headers too long for standard
184  *      blocks
185  * @tso_packets: Number of packets via the TSO xmit path
186  */
187 struct efx_tx_queue {
188         /* Members which don't change on the fast path */
189         struct efx_nic *efx ____cacheline_aligned_in_smp;
190         int queue;
191         struct efx_channel *channel;
192         struct efx_nic *nic;
193         struct efx_tx_buffer *buffer;
194         struct efx_special_buffer txd;
195         enum efx_flush_state flushed;
196
197         /* Members used mainly on the completion path */
198         unsigned int read_count ____cacheline_aligned_in_smp;
199         int stopped;
200
201         /* Members used only on the xmit path */
202         unsigned int insert_count ____cacheline_aligned_in_smp;
203         unsigned int write_count;
204         unsigned int old_read_count;
205         struct efx_tso_header *tso_headers_free;
206         unsigned int tso_bursts;
207         unsigned int tso_long_headers;
208         unsigned int tso_packets;
209 };
210
211 /**
212  * struct efx_rx_buffer - An Efx RX data buffer
213  * @dma_addr: DMA base address of the buffer
214  * @skb: The associated socket buffer, if any.
215  *      If both this and page are %NULL, the buffer slot is currently free.
216  * @page: The associated page buffer, if any.
217  *      If both this and skb are %NULL, the buffer slot is currently free.
218  * @data: Pointer to ethernet header
219  * @len: Buffer length, in bytes.
220  * @unmap_addr: DMA address to unmap
221  */
222 struct efx_rx_buffer {
223         dma_addr_t dma_addr;
224         struct sk_buff *skb;
225         struct page *page;
226         char *data;
227         unsigned int len;
228         dma_addr_t unmap_addr;
229 };
230
231 /**
232  * struct efx_rx_queue - An Efx RX queue
233  * @efx: The associated Efx NIC
234  * @queue: DMA queue number
235  * @channel: The associated channel
236  * @buffer: The software buffer ring
237  * @rxd: The hardware descriptor ring
238  * @added_count: Number of buffers added to the receive queue.
239  * @notified_count: Number of buffers given to NIC (<= @added_count).
240  * @removed_count: Number of buffers removed from the receive queue.
241  * @add_lock: Receive queue descriptor add spin lock.
242  *      This lock must be held in order to add buffers to the RX
243  *      descriptor ring (rxd and buffer) and to update added_count (but
244  *      not removed_count).
245  * @max_fill: RX descriptor maximum fill level (<= ring size)
246  * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill
247  *      (<= @max_fill)
248  * @fast_fill_limit: The level to which a fast fill will fill
249  *      (@fast_fill_trigger <= @fast_fill_limit <= @max_fill)
250  * @min_fill: RX descriptor minimum non-zero fill level.
251  *      This records the minimum fill level observed when a ring
252  *      refill was triggered.
253  * @min_overfill: RX descriptor minimum overflow fill level.
254  *      This records the minimum fill level at which RX queue
255  *      overflow was observed.  It should never be set.
256  * @alloc_page_count: RX allocation strategy counter.
257  * @alloc_skb_count: RX allocation strategy counter.
258  * @work: Descriptor push work thread
259  * @buf_page: Page for next RX buffer.
260  *      We can use a single page for multiple RX buffers. This tracks
261  *      the remaining space in the allocation.
262  * @buf_dma_addr: Page's DMA address.
263  * @buf_data: Page's host address.
264  * @flushed: Use when handling queue flushing
265  */
266 struct efx_rx_queue {
267         struct efx_nic *efx;
268         int queue;
269         struct efx_channel *channel;
270         struct efx_rx_buffer *buffer;
271         struct efx_special_buffer rxd;
272
273         int added_count;
274         int notified_count;
275         int removed_count;
276         spinlock_t add_lock;
277         unsigned int max_fill;
278         unsigned int fast_fill_trigger;
279         unsigned int fast_fill_limit;
280         unsigned int min_fill;
281         unsigned int min_overfill;
282         unsigned int alloc_page_count;
283         unsigned int alloc_skb_count;
284         struct delayed_work work;
285         unsigned int slow_fill_count;
286
287         struct page *buf_page;
288         dma_addr_t buf_dma_addr;
289         char *buf_data;
290         enum efx_flush_state flushed;
291 };
292
293 /**
294  * struct efx_buffer - An Efx general-purpose buffer
295  * @addr: host base address of the buffer
296  * @dma_addr: DMA base address of the buffer
297  * @len: Buffer length, in bytes
298  *
299  * The NIC uses these buffers for its interrupt status registers and
300  * MAC stats dumps.
301  */
302 struct efx_buffer {
303         void *addr;
304         dma_addr_t dma_addr;
305         unsigned int len;
306 };
307
308
309 /* Flags for channel->used_flags */
310 #define EFX_USED_BY_RX 1
311 #define EFX_USED_BY_TX 2
312 #define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX)
313
314 enum efx_rx_alloc_method {
315         RX_ALLOC_METHOD_AUTO = 0,
316         RX_ALLOC_METHOD_SKB = 1,
317         RX_ALLOC_METHOD_PAGE = 2,
318 };
319
320 /**
321  * struct efx_channel - An Efx channel
322  *
323  * A channel comprises an event queue, at least one TX queue, at least
324  * one RX queue, and an associated tasklet for processing the event
325  * queue.
326  *
327  * @efx: Associated Efx NIC
328  * @channel: Channel instance number
329  * @name: Name for channel and IRQ
330  * @used_flags: Channel is used by net driver
331  * @enabled: Channel enabled indicator
332  * @irq: IRQ number (MSI and MSI-X only)
333  * @irq_moderation: IRQ moderation value (in hardware ticks)
334  * @napi_dev: Net device used with NAPI
335  * @napi_str: NAPI control structure
336  * @reset_work: Scheduled reset work thread
337  * @work_pending: Is work pending via NAPI?
338  * @eventq: Event queue buffer
339  * @eventq_read_ptr: Event queue read pointer
340  * @last_eventq_read_ptr: Last event queue read pointer value.
341  * @eventq_magic: Event queue magic value for driver-generated test events
342  * @irq_count: Number of IRQs since last adaptive moderation decision
343  * @irq_mod_score: IRQ moderation score
344  * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
345  *      and diagnostic counters
346  * @rx_alloc_push_pages: RX allocation method currently in use for pushing
347  *      descriptors
348  * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
349  * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
350  * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
351  * @n_rx_mcast_mismatch: Count of unmatched multicast frames
352  * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
353  * @n_rx_overlength: Count of RX_OVERLENGTH errors
354  * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
355  */
356 struct efx_channel {
357         struct efx_nic *efx;
358         int channel;
359         char name[IFNAMSIZ + 6];
360         int used_flags;
361         bool enabled;
362         int irq;
363         unsigned int irq_moderation;
364         struct net_device *napi_dev;
365         struct napi_struct napi_str;
366         bool work_pending;
367         struct efx_special_buffer eventq;
368         unsigned int eventq_read_ptr;
369         unsigned int last_eventq_read_ptr;
370         unsigned int eventq_magic;
371
372         unsigned int irq_count;
373         unsigned int irq_mod_score;
374
375         int rx_alloc_level;
376         int rx_alloc_push_pages;
377
378         unsigned n_rx_tobe_disc;
379         unsigned n_rx_ip_hdr_chksum_err;
380         unsigned n_rx_tcp_udp_chksum_err;
381         unsigned n_rx_mcast_mismatch;
382         unsigned n_rx_frm_trunc;
383         unsigned n_rx_overlength;
384         unsigned n_skbuff_leaks;
385
386         /* Used to pipeline received packets in order to optimise memory
387          * access with prefetches.
388          */
389         struct efx_rx_buffer *rx_pkt;
390         bool rx_pkt_csummed;
391
392 };
393
394 enum efx_led_mode {
395         EFX_LED_OFF     = 0,
396         EFX_LED_ON      = 1,
397         EFX_LED_DEFAULT = 2
398 };
399
400 #define STRING_TABLE_LOOKUP(val, member) \
401         ((val) < member ## _max) ? member ## _names[val] : "(invalid)"
402
403 extern const char *efx_loopback_mode_names[];
404 extern const unsigned int efx_loopback_mode_max;
405 #define LOOPBACK_MODE(efx) \
406         STRING_TABLE_LOOKUP((efx)->loopback_mode, efx_loopback_mode)
407
408 extern const char *efx_interrupt_mode_names[];
409 extern const unsigned int efx_interrupt_mode_max;
410 #define INT_MODE(efx) \
411         STRING_TABLE_LOOKUP(efx->interrupt_mode, efx_interrupt_mode)
412
413 extern const char *efx_reset_type_names[];
414 extern const unsigned int efx_reset_type_max;
415 #define RESET_TYPE(type) \
416         STRING_TABLE_LOOKUP(type, efx_reset_type)
417
418 enum efx_int_mode {
419         /* Be careful if altering to correct macro below */
420         EFX_INT_MODE_MSIX = 0,
421         EFX_INT_MODE_MSI = 1,
422         EFX_INT_MODE_LEGACY = 2,
423         EFX_INT_MODE_MAX        /* Insert any new items before this */
424 };
425 #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
426
427 #define EFX_IS10G(efx) ((efx)->link_state.speed == 10000)
428
429 enum nic_state {
430         STATE_INIT = 0,
431         STATE_RUNNING = 1,
432         STATE_FINI = 2,
433         STATE_DISABLED = 3,
434         STATE_MAX,
435 };
436
437 /*
438  * Alignment of page-allocated RX buffers
439  *
440  * Controls the number of bytes inserted at the start of an RX buffer.
441  * This is the equivalent of NET_IP_ALIGN [which controls the alignment
442  * of the skb->head for hardware DMA].
443  */
444 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
445 #define EFX_PAGE_IP_ALIGN 0
446 #else
447 #define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
448 #endif
449
450 /*
451  * Alignment of the skb->head which wraps a page-allocated RX buffer
452  *
453  * The skb allocated to wrap an rx_buffer can have this alignment. Since
454  * the data is memcpy'd from the rx_buf, it does not need to be equal to
455  * EFX_PAGE_IP_ALIGN.
456  */
457 #define EFX_PAGE_SKB_ALIGN 2
458
459 /* Forward declaration */
460 struct efx_nic;
461
462 /* Pseudo bit-mask flow control field */
463 enum efx_fc_type {
464         EFX_FC_RX = FLOW_CTRL_RX,
465         EFX_FC_TX = FLOW_CTRL_TX,
466         EFX_FC_AUTO = 4,
467 };
468
469 /**
470  * struct efx_link_state - Current state of the link
471  * @up: Link is up
472  * @fd: Link is full-duplex
473  * @fc: Actual flow control flags
474  * @speed: Link speed (Mbps)
475  */
476 struct efx_link_state {
477         bool up;
478         bool fd;
479         enum efx_fc_type fc;
480         unsigned int speed;
481 };
482
483 static inline bool efx_link_state_equal(const struct efx_link_state *left,
484                                         const struct efx_link_state *right)
485 {
486         return left->up == right->up && left->fd == right->fd &&
487                 left->fc == right->fc && left->speed == right->speed;
488 }
489
490 /**
491  * struct efx_mac_operations - Efx MAC operations table
492  * @reconfigure: Reconfigure MAC. Serialised by the mac_lock
493  * @update_stats: Update statistics
494  * @check_fault: Check fault state. True if fault present.
495  */
496 struct efx_mac_operations {
497         int (*reconfigure) (struct efx_nic *efx);
498         void (*update_stats) (struct efx_nic *efx);
499         bool (*check_fault)(struct efx_nic *efx);
500 };
501
502 /**
503  * struct efx_phy_operations - Efx PHY operations table
504  * @probe: Probe PHY and initialise efx->mdio.mode_support, efx->mdio.mmds,
505  *      efx->loopback_modes.
506  * @init: Initialise PHY
507  * @fini: Shut down PHY
508  * @reconfigure: Reconfigure PHY (e.g. for new link parameters)
509  * @poll: Update @link_state and report whether it changed.
510  *      Serialised by the mac_lock.
511  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
512  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
513  * @set_npage_adv: Set abilities advertised in (Extended) Next Page
514  *      (only needed where AN bit is set in mmds)
515  * @test_alive: Test that PHY is 'alive' (online)
516  * @test_name: Get the name of a PHY-specific test/result
517  * @run_tests: Run tests and record results as appropriate (offline).
518  *      Flags are the ethtool tests flags.
519  */
520 struct efx_phy_operations {
521         int (*probe) (struct efx_nic *efx);
522         int (*init) (struct efx_nic *efx);
523         void (*fini) (struct efx_nic *efx);
524         void (*remove) (struct efx_nic *efx);
525         int (*reconfigure) (struct efx_nic *efx);
526         bool (*poll) (struct efx_nic *efx);
527         void (*get_settings) (struct efx_nic *efx,
528                               struct ethtool_cmd *ecmd);
529         int (*set_settings) (struct efx_nic *efx,
530                              struct ethtool_cmd *ecmd);
531         void (*set_npage_adv) (struct efx_nic *efx, u32);
532         int (*test_alive) (struct efx_nic *efx);
533         const char *(*test_name) (struct efx_nic *efx, unsigned int index);
534         int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
535 };
536
537 /**
538  * @enum efx_phy_mode - PHY operating mode flags
539  * @PHY_MODE_NORMAL: on and should pass traffic
540  * @PHY_MODE_TX_DISABLED: on with TX disabled
541  * @PHY_MODE_LOW_POWER: set to low power through MDIO
542  * @PHY_MODE_OFF: switched off through external control
543  * @PHY_MODE_SPECIAL: on but will not pass traffic
544  */
545 enum efx_phy_mode {
546         PHY_MODE_NORMAL         = 0,
547         PHY_MODE_TX_DISABLED    = 1,
548         PHY_MODE_LOW_POWER      = 2,
549         PHY_MODE_OFF            = 4,
550         PHY_MODE_SPECIAL        = 8,
551 };
552
553 static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode)
554 {
555         return !!(mode & ~PHY_MODE_TX_DISABLED);
556 }
557
558 /*
559  * Efx extended statistics
560  *
561  * Not all statistics are provided by all supported MACs.  The purpose
562  * is this structure is to contain the raw statistics provided by each
563  * MAC.
564  */
565 struct efx_mac_stats {
566         u64 tx_bytes;
567         u64 tx_good_bytes;
568         u64 tx_bad_bytes;
569         unsigned long tx_packets;
570         unsigned long tx_bad;
571         unsigned long tx_pause;
572         unsigned long tx_control;
573         unsigned long tx_unicast;
574         unsigned long tx_multicast;
575         unsigned long tx_broadcast;
576         unsigned long tx_lt64;
577         unsigned long tx_64;
578         unsigned long tx_65_to_127;
579         unsigned long tx_128_to_255;
580         unsigned long tx_256_to_511;
581         unsigned long tx_512_to_1023;
582         unsigned long tx_1024_to_15xx;
583         unsigned long tx_15xx_to_jumbo;
584         unsigned long tx_gtjumbo;
585         unsigned long tx_collision;
586         unsigned long tx_single_collision;
587         unsigned long tx_multiple_collision;
588         unsigned long tx_excessive_collision;
589         unsigned long tx_deferred;
590         unsigned long tx_late_collision;
591         unsigned long tx_excessive_deferred;
592         unsigned long tx_non_tcpudp;
593         unsigned long tx_mac_src_error;
594         unsigned long tx_ip_src_error;
595         u64 rx_bytes;
596         u64 rx_good_bytes;
597         u64 rx_bad_bytes;
598         unsigned long rx_packets;
599         unsigned long rx_good;
600         unsigned long rx_bad;
601         unsigned long rx_pause;
602         unsigned long rx_control;
603         unsigned long rx_unicast;
604         unsigned long rx_multicast;
605         unsigned long rx_broadcast;
606         unsigned long rx_lt64;
607         unsigned long rx_64;
608         unsigned long rx_65_to_127;
609         unsigned long rx_128_to_255;
610         unsigned long rx_256_to_511;
611         unsigned long rx_512_to_1023;
612         unsigned long rx_1024_to_15xx;
613         unsigned long rx_15xx_to_jumbo;
614         unsigned long rx_gtjumbo;
615         unsigned long rx_bad_lt64;
616         unsigned long rx_bad_64_to_15xx;
617         unsigned long rx_bad_15xx_to_jumbo;
618         unsigned long rx_bad_gtjumbo;
619         unsigned long rx_overflow;
620         unsigned long rx_missed;
621         unsigned long rx_false_carrier;
622         unsigned long rx_symbol_error;
623         unsigned long rx_align_error;
624         unsigned long rx_length_error;
625         unsigned long rx_internal_error;
626         unsigned long rx_good_lt64;
627 };
628
629 /* Number of bits used in a multicast filter hash address */
630 #define EFX_MCAST_HASH_BITS 8
631
632 /* Number of (single-bit) entries in a multicast filter hash */
633 #define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS)
634
635 /* An Efx multicast filter hash */
636 union efx_multicast_hash {
637         u8 byte[EFX_MCAST_HASH_ENTRIES / 8];
638         efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8];
639 };
640
641 /**
642  * struct efx_nic - an Efx NIC
643  * @name: Device name (net device name or bus id before net device registered)
644  * @pci_dev: The PCI device
645  * @type: Controller type attributes
646  * @legacy_irq: IRQ number
647  * @workqueue: Workqueue for port reconfigures and the HW monitor.
648  *      Work items do not hold and must not acquire RTNL.
649  * @workqueue_name: Name of workqueue
650  * @reset_work: Scheduled reset workitem
651  * @monitor_work: Hardware monitor workitem
652  * @membase_phys: Memory BAR value as physical address
653  * @membase: Memory BAR value
654  * @biu_lock: BIU (bus interface unit) lock
655  * @interrupt_mode: Interrupt mode
656  * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues
657  * @irq_rx_moderation: IRQ moderation time for RX event queues
658  * @state: Device state flag. Serialised by the rtnl_lock.
659  * @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
660  * @tx_queue: TX DMA queues
661  * @rx_queue: RX DMA queues
662  * @channel: Channels
663  * @next_buffer_table: First available buffer table id
664  * @n_rx_queues: Number of RX queues
665  * @n_channels: Number of channels in use
666  * @rx_buffer_len: RX buffer length
667  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
668  * @int_error_count: Number of internal errors seen recently
669  * @int_error_expire: Time at which error count will be expired
670  * @irq_status: Interrupt status buffer
671  * @last_irq_cpu: Last CPU to handle interrupt.
672  *      This register is written with the SMP processor ID whenever an
673  *      interrupt is handled.  It is used by efx_nic_test_interrupt()
674  *      to verify that an interrupt has occurred.
675  * @spi_flash: SPI flash device
676  *      This field will be %NULL if no flash device is present (or for Siena).
677  * @spi_eeprom: SPI EEPROM device
678  *      This field will be %NULL if no EEPROM device is present (or for Siena).
679  * @spi_lock: SPI bus lock
680  * @mtd_list: List of MTDs attached to the NIC
681  * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
682  * @nic_data: Hardware dependant state
683  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
684  *      @port_inhibited, efx_monitor() and efx_reconfigure_port()
685  * @port_enabled: Port enabled indicator.
686  *      Serialises efx_stop_all(), efx_start_all(), efx_monitor() and
687  *      efx_mac_work() with kernel interfaces. Safe to read under any
688  *      one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
689  *      be held to modify it.
690  * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
691  * @port_initialized: Port initialized?
692  * @net_dev: Operating system network device. Consider holding the rtnl lock
693  * @rx_checksum_enabled: RX checksumming enabled
694  * @netif_stop_count: Port stop count
695  * @netif_stop_lock: Port stop lock
696  * @mac_stats: MAC statistics. These include all statistics the MACs
697  *      can provide.  Generic code converts these into a standard
698  *      &struct net_device_stats.
699  * @stats_buffer: DMA buffer for statistics
700  * @stats_lock: Statistics update lock. Serialises statistics fetches
701  * @mac_op: MAC interface
702  * @mac_address: Permanent MAC address
703  * @phy_type: PHY type
704  * @mdio_lock: MDIO lock
705  * @phy_op: PHY interface
706  * @phy_data: PHY private data (including PHY-specific stats)
707  * @mdio: PHY MDIO interface
708  * @mdio_bus: PHY MDIO bus ID (only used by Siena)
709  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
710  * @xmac_poll_required: XMAC link state needs polling
711  * @link_advertising: Autonegotiation advertising flags
712  * @link_state: Current state of the link
713  * @n_link_state_changes: Number of times the link has changed state
714  * @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
715  * @multicast_hash: Multicast hash table
716  * @wanted_fc: Wanted flow control flags
717  * @mac_work: Work item for changing MAC promiscuity and multicast hash
718  * @loopback_mode: Loopback status
719  * @loopback_modes: Supported loopback mode bitmask
720  * @loopback_selftest: Offline self-test private state
721  *
722  * This is stored in the private area of the &struct net_device.
723  */
724 struct efx_nic {
725         char name[IFNAMSIZ];
726         struct pci_dev *pci_dev;
727         const struct efx_nic_type *type;
728         int legacy_irq;
729         struct workqueue_struct *workqueue;
730         char workqueue_name[16];
731         struct work_struct reset_work;
732         struct delayed_work monitor_work;
733         resource_size_t membase_phys;
734         void __iomem *membase;
735         spinlock_t biu_lock;
736         enum efx_int_mode interrupt_mode;
737         bool irq_rx_adaptive;
738         unsigned int irq_rx_moderation;
739
740         enum nic_state state;
741         enum reset_type reset_pending;
742
743         struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT];
744         struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
745         struct efx_channel channel[EFX_MAX_CHANNELS];
746
747         unsigned next_buffer_table;
748         int n_rx_queues;
749         int n_channels;
750         unsigned int rx_buffer_len;
751         unsigned int rx_buffer_order;
752
753         unsigned int_error_count;
754         unsigned long int_error_expire;
755
756         struct efx_buffer irq_status;
757         volatile signed int last_irq_cpu;
758         unsigned long irq_zero_count;
759
760         struct efx_spi_device *spi_flash;
761         struct efx_spi_device *spi_eeprom;
762         struct mutex spi_lock;
763 #ifdef CONFIG_SFC_MTD
764         struct list_head mtd_list;
765 #endif
766
767         unsigned n_rx_nodesc_drop_cnt;
768
769         void *nic_data;
770
771         struct mutex mac_lock;
772         struct work_struct mac_work;
773         bool port_enabled;
774         bool port_inhibited;
775
776         bool port_initialized;
777         struct net_device *net_dev;
778         bool rx_checksum_enabled;
779
780         atomic_t netif_stop_count;
781         spinlock_t netif_stop_lock;
782
783         struct efx_mac_stats mac_stats;
784         struct efx_buffer stats_buffer;
785         spinlock_t stats_lock;
786
787         struct efx_mac_operations *mac_op;
788         unsigned char mac_address[ETH_ALEN];
789
790         unsigned int phy_type;
791         struct mutex mdio_lock;
792         struct efx_phy_operations *phy_op;
793         void *phy_data;
794         struct mdio_if_info mdio;
795         unsigned int mdio_bus;
796         enum efx_phy_mode phy_mode;
797
798         bool xmac_poll_required;
799         u32 link_advertising;
800         struct efx_link_state link_state;
801         unsigned int n_link_state_changes;
802
803         bool promiscuous;
804         union efx_multicast_hash multicast_hash;
805         enum efx_fc_type wanted_fc;
806
807         atomic_t rx_reset;
808         enum efx_loopback_mode loopback_mode;
809         u64 loopback_modes;
810
811         void *loopback_selftest;
812 };
813
814 static inline int efx_dev_registered(struct efx_nic *efx)
815 {
816         return efx->net_dev->reg_state == NETREG_REGISTERED;
817 }
818
819 /* Net device name, for inclusion in log messages if it has been registered.
820  * Use efx->name not efx->net_dev->name so that races with (un)registration
821  * are harmless.
822  */
823 static inline const char *efx_dev_name(struct efx_nic *efx)
824 {
825         return efx_dev_registered(efx) ? efx->name : "";
826 }
827
828 static inline unsigned int efx_port_num(struct efx_nic *efx)
829 {
830         return PCI_FUNC(efx->pci_dev->devfn);
831 }
832
833 /**
834  * struct efx_nic_type - Efx device type definition
835  * @probe: Probe the controller
836  * @remove: Free resources allocated by probe()
837  * @init: Initialise the controller
838  * @fini: Shut down the controller
839  * @monitor: Periodic function for polling link state and hardware monitor
840  * @reset: Reset the controller hardware and possibly the PHY.  This will
841  *      be called while the controller is uninitialised.
842  * @probe_port: Probe the MAC and PHY
843  * @remove_port: Free resources allocated by probe_port()
844  * @prepare_flush: Prepare the hardware for flushing the DMA queues
845  * @update_stats: Update statistics not provided by event handling
846  * @start_stats: Start the regular fetching of statistics
847  * @stop_stats: Stop the regular fetching of statistics
848  * @set_id_led: Set state of identifying LED or revert to automatic function
849  * @push_irq_moderation: Apply interrupt moderation value
850  * @push_multicast_hash: Apply multicast hash table
851  * @reconfigure_port: Push loopback/power/txdis changes to the MAC and PHY
852  * @get_wol: Get WoL configuration from driver state
853  * @set_wol: Push WoL configuration to the NIC
854  * @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume)
855  * @test_registers: Test read/write functionality of control registers
856  * @test_nvram: Test validity of NVRAM contents
857  * @default_mac_ops: efx_mac_operations to set at startup
858  * @revision: Hardware architecture revision
859  * @mem_map_size: Memory BAR mapped size
860  * @txd_ptr_tbl_base: TX descriptor ring base address
861  * @rxd_ptr_tbl_base: RX descriptor ring base address
862  * @buf_tbl_base: Buffer table base address
863  * @evq_ptr_tbl_base: Event queue pointer table base address
864  * @evq_rptr_tbl_base: Event queue read-pointer table base address
865  * @max_dma_mask: Maximum possible DMA mask
866  * @rx_buffer_padding: Padding added to each RX buffer
867  * @max_interrupt_mode: Highest capability interrupt mode supported
868  *      from &enum efx_init_mode.
869  * @phys_addr_channels: Number of channels with physically addressed
870  *      descriptors
871  * @tx_dc_base: Base address in SRAM of TX queue descriptor caches
872  * @rx_dc_base: Base address in SRAM of RX queue descriptor caches
873  * @offload_features: net_device feature flags for protocol offload
874  *      features implemented in hardware
875  * @reset_world_flags: Flags for additional components covered by
876  *      reset method RESET_TYPE_WORLD
877  */
878 struct efx_nic_type {
879         int (*probe)(struct efx_nic *efx);
880         void (*remove)(struct efx_nic *efx);
881         int (*init)(struct efx_nic *efx);
882         void (*fini)(struct efx_nic *efx);
883         void (*monitor)(struct efx_nic *efx);
884         int (*reset)(struct efx_nic *efx, enum reset_type method);
885         int (*probe_port)(struct efx_nic *efx);
886         void (*remove_port)(struct efx_nic *efx);
887         void (*prepare_flush)(struct efx_nic *efx);
888         void (*update_stats)(struct efx_nic *efx);
889         void (*start_stats)(struct efx_nic *efx);
890         void (*stop_stats)(struct efx_nic *efx);
891         void (*set_id_led)(struct efx_nic *efx, enum efx_led_mode mode);
892         void (*push_irq_moderation)(struct efx_channel *channel);
893         void (*push_multicast_hash)(struct efx_nic *efx);
894         int (*reconfigure_port)(struct efx_nic *efx);
895         void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol);
896         int (*set_wol)(struct efx_nic *efx, u32 type);
897         void (*resume_wol)(struct efx_nic *efx);
898         int (*test_registers)(struct efx_nic *efx);
899         int (*test_nvram)(struct efx_nic *efx);
900         struct efx_mac_operations *default_mac_ops;
901
902         int revision;
903         unsigned int mem_map_size;
904         unsigned int txd_ptr_tbl_base;
905         unsigned int rxd_ptr_tbl_base;
906         unsigned int buf_tbl_base;
907         unsigned int evq_ptr_tbl_base;
908         unsigned int evq_rptr_tbl_base;
909         u64 max_dma_mask;
910         unsigned int rx_buffer_padding;
911         unsigned int max_interrupt_mode;
912         unsigned int phys_addr_channels;
913         unsigned int tx_dc_base;
914         unsigned int rx_dc_base;
915         unsigned long offload_features;
916         u32 reset_world_flags;
917 };
918
919 /**************************************************************************
920  *
921  * Prototypes and inline functions
922  *
923  *************************************************************************/
924
925 /* Iterate over all used channels */
926 #define efx_for_each_channel(_channel, _efx)                            \
927         for (_channel = &_efx->channel[0];                              \
928              _channel < &_efx->channel[EFX_MAX_CHANNELS];               \
929              _channel++)                                                \
930                 if (!_channel->used_flags)                              \
931                         continue;                                       \
932                 else
933
934 /* Iterate over all used TX queues */
935 #define efx_for_each_tx_queue(_tx_queue, _efx)                          \
936         for (_tx_queue = &_efx->tx_queue[0];                            \
937              _tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT];           \
938              _tx_queue++)
939
940 /* Iterate over all TX queues belonging to a channel */
941 #define efx_for_each_channel_tx_queue(_tx_queue, _channel)              \
942         for (_tx_queue = &_channel->efx->tx_queue[0];                   \
943              _tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT];  \
944              _tx_queue++)                                               \
945                 if (_tx_queue->channel != _channel)                     \
946                         continue;                                       \
947                 else
948
949 /* Iterate over all used RX queues */
950 #define efx_for_each_rx_queue(_rx_queue, _efx)                          \
951         for (_rx_queue = &_efx->rx_queue[0];                            \
952              _rx_queue < &_efx->rx_queue[_efx->n_rx_queues];            \
953              _rx_queue++)
954
955 /* Iterate over all RX queues belonging to a channel */
956 #define efx_for_each_channel_rx_queue(_rx_queue, _channel)              \
957         for (_rx_queue = &_channel->efx->rx_queue[_channel->channel];   \
958              _rx_queue;                                                 \
959              _rx_queue = NULL)                                          \
960                 if (_rx_queue->channel != _channel)                     \
961                         continue;                                       \
962                 else
963
964 /* Returns a pointer to the specified receive buffer in the RX
965  * descriptor queue.
966  */
967 static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue,
968                                                   unsigned int index)
969 {
970         return (&rx_queue->buffer[index]);
971 }
972
973 /* Set bit in a little-endian bitfield */
974 static inline void set_bit_le(unsigned nr, unsigned char *addr)
975 {
976         addr[nr / 8] |= (1 << (nr % 8));
977 }
978
979 /* Clear bit in a little-endian bitfield */
980 static inline void clear_bit_le(unsigned nr, unsigned char *addr)
981 {
982         addr[nr / 8] &= ~(1 << (nr % 8));
983 }
984
985
986 /**
987  * EFX_MAX_FRAME_LEN - calculate maximum frame length
988  *
989  * This calculates the maximum frame length that will be used for a
990  * given MTU.  The frame length will be equal to the MTU plus a
991  * constant amount of header space and padding.  This is the quantity
992  * that the net driver will program into the MAC as the maximum frame
993  * length.
994  *
995  * The 10G MAC requires 8-byte alignment on the frame
996  * length, so we round up to the nearest 8.
997  *
998  * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an
999  * XGMII cycle).  If the frame length reaches the maximum value in the
1000  * same cycle, the XMAC can miss the IPG altogether.  We work around
1001  * this by adding a further 16 bytes.
1002  */
1003 #define EFX_MAX_FRAME_LEN(mtu) \
1004         ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16)
1005
1006
1007 #endif /* EFX_NET_DRIVER_H */