SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/irda/tekram.c

   1 /*********************************************************************
   2  *
   3  * Filename:      tekram.c
   4  * Version:       1.2
   5  * Description:   Implementation of the Tekram IrMate IR-210B dongle
   6  * Status:        Experimental.
   7  * Author:        Dag Brattli <dagb@cs.uit.no>
   8  * Created at:    Wed Oct 21 20:02:35 1998
   9  * Modified at:   Fri Dec 17 09:13:09 1999
  10  * Modified by:   Dag Brattli <dagb@cs.uit.no>
  11  *
  12  *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
  13  *
  14  *     This program is free software; you can redistribute it and/or
  15  *     modify it under the terms of the GNU General Public License as
  16  *     published by the Free Software Foundation; either version 2 of
  17  *     the License, or (at your option) any later version.
  18  *
  19  *     Neither Dag Brattli nor University of Tromsø admit liability nor
  20  *     provide warranty for any of this software. This material is
  21  *     provided "AS-IS" and at no charge.
  22  *
  23  ********************************************************************/
  24
  25 #include <linux/module.h>
  26 #include <linux/delay.h>
  27 #include <linux/tty.h>
  28 #include <linux/init.h>
  29
  30 #include <net/irda/irda.h>
  31 #include <net/irda/irda_device.h>
  32
  33 static void tekram_open(dongle_t *self, struct qos_info *qos);
  34 static void tekram_close(dongle_t *self);
  35 static int  tekram_change_speed(struct irda_task *task);
  36 static int  tekram_reset(struct irda_task *task);
  37
  38 #define TEKRAM_115200 0x00
  39 #define TEKRAM_57600  0x01
  40 #define TEKRAM_38400  0x02
  41 #define TEKRAM_19200  0x03
  42 #define TEKRAM_9600   0x04
  43
  44 #define TEKRAM_PW     0x10 /* Pulse select bit */
  45
  46 static struct dongle_reg dongle = {
  47         .type = IRDA_TEKRAM_DONGLE,
  48         .open  = tekram_open,
  49         .close = tekram_close,
  50         .reset = tekram_reset,
  51         .change_speed = tekram_change_speed,
  52         .owner = THIS_MODULE,
  53 };
  54
  55 static int __init tekram_init(void)
  56 {
  57         return irda_device_register_dongle(&dongle);
  58 }
  59
  60 static void __exit tekram_cleanup(void)
  61 {
  62         irda_device_unregister_dongle(&dongle);
  63 }
  64
  65 static void tekram_open(dongle_t *self, struct qos_info *qos)
  66 {
  67         IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
  68
  69         qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
  70         qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
  71         irda_qos_bits_to_value(qos);
  72 }
  73
  74 static void tekram_close(dongle_t *self)
  75 {
  76         IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
  77
  78         /* Power off dongle */
  79         self->set_dtr_rts(self->dev, FALSE, FALSE);
  80
  81         if (self->reset_task)
  82                 irda_task_delete(self->reset_task);
  83         if (self->speed_task)
  84                 irda_task_delete(self->speed_task);
  85 }
  86
  87 /*
  88  * Function tekram_change_speed (dev, state, speed)
  89  *
  90  *    Set the speed for the Tekram IRMate 210 type dongle. Warning, this
  91  *    function must be called with a process context!
  92  *
  93  *    Algorithm
  94  *    1. clear DTR
  95  *    2. set RTS, and wait at least 7 us
  96  *    3. send Control Byte to the IR-210 through TXD to set new baud rate
  97  *       wait until the stop bit of Control Byte is sent (for 9600 baud rate,
  98  *       it takes about 100 msec)
  99  *    5. clear RTS (return to NORMAL Operation)
 100  *    6. wait at least 50 us, new setting (baud rate, etc) takes effect here
 101  *       after
 102  */
 103 static int tekram_change_speed(struct irda_task *task)
 104 {
 105         dongle_t *self = (dongle_t *) task->instance;
 106         __u32 speed = (__u32) task->param;
 107         __u8 byte;
 108         int ret = 0;
 109
 110         IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
 111
 112         IRDA_ASSERT(task != NULL, return -1;);
 113
 114         if (self->speed_task && self->speed_task != task) {
 115                 IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
 116                 return msecs_to_jiffies(10);
 117         } else
 118                 self->speed_task = task;
 119
 120         switch (speed) {
 121         default:
 122         case 9600:
 123                 byte = TEKRAM_PW|TEKRAM_9600;
 124                 break;
 125         case 19200:
 126                 byte = TEKRAM_PW|TEKRAM_19200;
 127                 break;
 128         case 38400:
 129                 byte = TEKRAM_PW|TEKRAM_38400;
 130                 break;
 131         case 57600:
 132                 byte = TEKRAM_PW|TEKRAM_57600;
 133                 break;
 134         case 115200:
 135                 byte = TEKRAM_115200;
 136                 break;
 137         }
 138
 139         switch (task->state) {
 140         case IRDA_TASK_INIT:
 141         case IRDA_TASK_CHILD_INIT:
 142                 /*
 143                  * Need to reset the dongle and go to 9600 bps before
 144                  * programming
 145                  */
 146                 if (irda_task_execute(self, tekram_reset, NULL, task,
 147                                       (void *) speed))
 148                 {
 149                         /* Dongle need more time to reset */
 150                         irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
 151
 152                         /* Give reset 1 sec to finish */
 153                         ret = msecs_to_jiffies(1000);
 154                 } else
 155                         irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
 156                 break;
 157         case IRDA_TASK_CHILD_WAIT:
 158                 IRDA_WARNING("%s(), resetting dongle timed out!\n",
 159                              __FUNCTION__);
 160                 ret = -1;
 161                 break;
 162         case IRDA_TASK_CHILD_DONE:
 163                 /* Set DTR, Clear RTS */
 164                 self->set_dtr_rts(self->dev, TRUE, FALSE);
 165
 166                 /* Wait at least 7us */
 167                 udelay(14);
 168
 169                 /* Write control byte */
 170                 self->write(self->dev, &byte, 1);
 171
 172                 irda_task_next_state(task, IRDA_TASK_WAIT);
 173
 174                 /* Wait at least 100 ms */
 175                 ret = msecs_to_jiffies(150);
 176                 break;
 177         case IRDA_TASK_WAIT:
 178                 /* Set DTR, Set RTS */
 179                 self->set_dtr_rts(self->dev, TRUE, TRUE);
 180
 181                 irda_task_next_state(task, IRDA_TASK_DONE);
 182                 self->speed_task = NULL;
 183                 break;
 184         default:
 185                 IRDA_ERROR("%s(), unknown state %d\n",
 186                            __FUNCTION__, task->state);
 187                 irda_task_next_state(task, IRDA_TASK_DONE);
 188                 self->speed_task = NULL;
 189                 ret = -1;
 190                 break;
 191         }
 192         return ret;
 193 }
 194
 195 /*
 196  * Function tekram_reset (driver)
 197  *
 198  *      This function resets the tekram dongle. Warning, this function
 199  *      must be called with a process context!!
 200  *
 201  *      Algorithm:
 202  *        0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
 203  *        1. clear RTS
 204  *        2. set DTR, and wait at least 1 ms
 205  *        3. clear DTR to SPACE state, wait at least 50 us for further
 206  *         operation
 207  */
 208 int tekram_reset(struct irda_task *task)
 209 {
 210         dongle_t *self = (dongle_t *) task->instance;
 211         int ret = 0;
 212
 213         IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
 214
 215         IRDA_ASSERT(task != NULL, return -1;);
 216
 217         if (self->reset_task && self->reset_task != task) {
 218                 IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
 219                 return msecs_to_jiffies(10);
 220         } else
 221                 self->reset_task = task;
 222
 223         /* Power off dongle */
 224         //self->set_dtr_rts(self->dev, FALSE, FALSE);
 225         self->set_dtr_rts(self->dev, TRUE, TRUE);
 226
 227         switch (task->state) {
 228         case IRDA_TASK_INIT:
 229                 irda_task_next_state(task, IRDA_TASK_WAIT1);
 230
 231                 /* Sleep 50 ms */
 232                 ret = msecs_to_jiffies(50);
 233                 break;
 234         case IRDA_TASK_WAIT1:
 235                 /* Clear DTR, Set RTS */
 236                 self->set_dtr_rts(self->dev, FALSE, TRUE);
 237
 238                 irda_task_next_state(task, IRDA_TASK_WAIT2);
 239
 240                 /* Should sleep 1 ms */
 241                 ret = msecs_to_jiffies(1);
 242                 break;
 243         case IRDA_TASK_WAIT2:
 244                 /* Set DTR, Set RTS */
 245                 self->set_dtr_rts(self->dev, TRUE, TRUE);
 246
 247                 /* Wait at least 50 us */
 248                 udelay(75);
 249
 250                 irda_task_next_state(task, IRDA_TASK_DONE);
 251                 self->reset_task = NULL;
 252                 break;
 253         default:
 254                 IRDA_ERROR("%s(), unknown state %d\n",
 255                            __FUNCTION__, task->state);
 256                 irda_task_next_state(task, IRDA_TASK_DONE);
 257                 self->reset_task = NULL;
 258                 ret = -1;
 259         }
 260         return ret;
 261 }
 262
 263 MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
 264 MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
 265 MODULE_LICENSE("GPL");
 266 MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
 267
 268 /*
 269  * Function init_module (void)
 270  *
 271  *    Initialize Tekram module
 272  *
 273  */
 274 module_init(tekram_init);
 275
 276 /*
 277  * Function cleanup_module (void)
 278  *
 279  *    Cleanup Tekram module
 280  *
 281  */
 282 module_exit(tekram_cleanup);