cxgb3 - sge page management
[safe/jmp/linux-2.6] / drivers / net / cxgb3 / sge.c
1 /*
2  * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  */
32 #include <linux/skbuff.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/if_vlan.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/dma-mapping.h>
39 #include "common.h"
40 #include "regs.h"
41 #include "sge_defs.h"
42 #include "t3_cpl.h"
43 #include "firmware_exports.h"
44
45 #define USE_GTS 0
46
47 #define SGE_RX_SM_BUF_SIZE 1536
48
49 #define SGE_RX_COPY_THRES  256
50 #define SGE_RX_PULL_LEN    128
51
52 /*
53  * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
54  * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
55  * directly.
56  */
57 #define FL0_PG_CHUNK_SIZE  2048
58
59 #define SGE_RX_DROP_THRES 16
60
61 /*
62  * Period of the Tx buffer reclaim timer.  This timer does not need to run
63  * frequently as Tx buffers are usually reclaimed by new Tx packets.
64  */
65 #define TX_RECLAIM_PERIOD (HZ / 4)
66
67 /* WR size in bytes */
68 #define WR_LEN (WR_FLITS * 8)
69
70 /*
71  * Types of Tx queues in each queue set.  Order here matters, do not change.
72  */
73 enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
74
75 /* Values for sge_txq.flags */
76 enum {
77         TXQ_RUNNING = 1 << 0,   /* fetch engine is running */
78         TXQ_LAST_PKT_DB = 1 << 1,       /* last packet rang the doorbell */
79 };
80
81 struct tx_desc {
82         u64 flit[TX_DESC_FLITS];
83 };
84
85 struct rx_desc {
86         __be32 addr_lo;
87         __be32 len_gen;
88         __be32 gen2;
89         __be32 addr_hi;
90 };
91
92 struct tx_sw_desc {             /* SW state per Tx descriptor */
93         struct sk_buff *skb;
94 };
95
96 struct rx_sw_desc {                /* SW state per Rx descriptor */
97         union {
98                 struct sk_buff *skb;
99                 struct fl_pg_chunk pg_chunk;
100         };
101         DECLARE_PCI_UNMAP_ADDR(dma_addr);
102 };
103
104 struct rsp_desc {               /* response queue descriptor */
105         struct rss_header rss_hdr;
106         __be32 flags;
107         __be32 len_cq;
108         u8 imm_data[47];
109         u8 intr_gen;
110 };
111
112 struct unmap_info {             /* packet unmapping info, overlays skb->cb */
113         int sflit;              /* start flit of first SGL entry in Tx descriptor */
114         u16 fragidx;            /* first page fragment in current Tx descriptor */
115         u16 addr_idx;           /* buffer index of first SGL entry in descriptor */
116         u32 len;                /* mapped length of skb main body */
117 };
118
119 /*
120  * Holds unmapping information for Tx packets that need deferred unmapping.
121  * This structure lives at skb->head and must be allocated by callers.
122  */
123 struct deferred_unmap_info {
124         struct pci_dev *pdev;
125         dma_addr_t addr[MAX_SKB_FRAGS + 1];
126 };
127
128 /*
129  * Maps a number of flits to the number of Tx descriptors that can hold them.
130  * The formula is
131  *
132  * desc = 1 + (flits - 2) / (WR_FLITS - 1).
133  *
134  * HW allows up to 4 descriptors to be combined into a WR.
135  */
136 static u8 flit_desc_map[] = {
137         0,
138 #if SGE_NUM_GENBITS == 1
139         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
140         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
141         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
142         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
143 #elif SGE_NUM_GENBITS == 2
144         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
145         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
146         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
147         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
148 #else
149 # error "SGE_NUM_GENBITS must be 1 or 2"
150 #endif
151 };
152
153 static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
154 {
155         return container_of(q, struct sge_qset, fl[qidx]);
156 }
157
158 static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
159 {
160         return container_of(q, struct sge_qset, rspq);
161 }
162
163 static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
164 {
165         return container_of(q, struct sge_qset, txq[qidx]);
166 }
167
168 /**
169  *      refill_rspq - replenish an SGE response queue
170  *      @adapter: the adapter
171  *      @q: the response queue to replenish
172  *      @credits: how many new responses to make available
173  *
174  *      Replenishes a response queue by making the supplied number of responses
175  *      available to HW.
176  */
177 static inline void refill_rspq(struct adapter *adapter,
178                                const struct sge_rspq *q, unsigned int credits)
179 {
180         t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
181                      V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
182 }
183
184 /**
185  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
186  *
187  *      Returns true if the platfrom needs sk_buff unmapping.  The compiler
188  *      optimizes away unecessary code if this returns true.
189  */
190 static inline int need_skb_unmap(void)
191 {
192         /*
193          * This structure is used to tell if the platfrom needs buffer
194          * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
195          */
196         struct dummy {
197                 DECLARE_PCI_UNMAP_ADDR(addr);
198         };
199
200         return sizeof(struct dummy) != 0;
201 }
202
203 /**
204  *      unmap_skb - unmap a packet main body and its page fragments
205  *      @skb: the packet
206  *      @q: the Tx queue containing Tx descriptors for the packet
207  *      @cidx: index of Tx descriptor
208  *      @pdev: the PCI device
209  *
210  *      Unmap the main body of an sk_buff and its page fragments, if any.
211  *      Because of the fairly complicated structure of our SGLs and the desire
212  *      to conserve space for metadata, we keep the information necessary to
213  *      unmap an sk_buff partly in the sk_buff itself (in its cb), and partly
214  *      in the Tx descriptors (the physical addresses of the various data
215  *      buffers).  The send functions initialize the state in skb->cb so we
216  *      can unmap the buffers held in the first Tx descriptor here, and we
217  *      have enough information at this point to update the state for the next
218  *      Tx descriptor.
219  */
220 static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
221                              unsigned int cidx, struct pci_dev *pdev)
222 {
223         const struct sg_ent *sgp;
224         struct unmap_info *ui = (struct unmap_info *)skb->cb;
225         int nfrags, frag_idx, curflit, j = ui->addr_idx;
226
227         sgp = (struct sg_ent *)&q->desc[cidx].flit[ui->sflit];
228
229         if (ui->len) {
230                 pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]), ui->len,
231                                  PCI_DMA_TODEVICE);
232                 ui->len = 0;    /* so we know for next descriptor for this skb */
233                 j = 1;
234         }
235
236         frag_idx = ui->fragidx;
237         curflit = ui->sflit + 1 + j;
238         nfrags = skb_shinfo(skb)->nr_frags;
239
240         while (frag_idx < nfrags && curflit < WR_FLITS) {
241                 pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
242                                skb_shinfo(skb)->frags[frag_idx].size,
243                                PCI_DMA_TODEVICE);
244                 j ^= 1;
245                 if (j == 0) {
246                         sgp++;
247                         curflit++;
248                 }
249                 curflit++;
250                 frag_idx++;
251         }
252
253         if (frag_idx < nfrags) {        /* SGL continues into next Tx descriptor */
254                 ui->fragidx = frag_idx;
255                 ui->addr_idx = j;
256                 ui->sflit = curflit - WR_FLITS - j;     /* sflit can be -1 */
257         }
258 }
259
260 /**
261  *      free_tx_desc - reclaims Tx descriptors and their buffers
262  *      @adapter: the adapter
263  *      @q: the Tx queue to reclaim descriptors from
264  *      @n: the number of descriptors to reclaim
265  *
266  *      Reclaims Tx descriptors from an SGE Tx queue and frees the associated
267  *      Tx buffers.  Called with the Tx queue lock held.
268  */
269 static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
270                          unsigned int n)
271 {
272         struct tx_sw_desc *d;
273         struct pci_dev *pdev = adapter->pdev;
274         unsigned int cidx = q->cidx;
275
276         const int need_unmap = need_skb_unmap() &&
277                                q->cntxt_id >= FW_TUNNEL_SGEEC_START;
278
279         d = &q->sdesc[cidx];
280         while (n--) {
281                 if (d->skb) {   /* an SGL is present */
282                         if (need_unmap)
283                                 unmap_skb(d->skb, q, cidx, pdev);
284                         if (d->skb->priority == cidx)
285                                 kfree_skb(d->skb);
286                 }
287                 ++d;
288                 if (++cidx == q->size) {
289                         cidx = 0;
290                         d = q->sdesc;
291                 }
292         }
293         q->cidx = cidx;
294 }
295
296 /**
297  *      reclaim_completed_tx - reclaims completed Tx descriptors
298  *      @adapter: the adapter
299  *      @q: the Tx queue to reclaim completed descriptors from
300  *
301  *      Reclaims Tx descriptors that the SGE has indicated it has processed,
302  *      and frees the associated buffers if possible.  Called with the Tx
303  *      queue's lock held.
304  */
305 static inline void reclaim_completed_tx(struct adapter *adapter,
306                                         struct sge_txq *q)
307 {
308         unsigned int reclaim = q->processed - q->cleaned;
309
310         if (reclaim) {
311                 free_tx_desc(adapter, q, reclaim);
312                 q->cleaned += reclaim;
313                 q->in_use -= reclaim;
314         }
315 }
316
317 /**
318  *      should_restart_tx - are there enough resources to restart a Tx queue?
319  *      @q: the Tx queue
320  *
321  *      Checks if there are enough descriptors to restart a suspended Tx queue.
322  */
323 static inline int should_restart_tx(const struct sge_txq *q)
324 {
325         unsigned int r = q->processed - q->cleaned;
326
327         return q->in_use - r < (q->size >> 1);
328 }
329
330 /**
331  *      free_rx_bufs - free the Rx buffers on an SGE free list
332  *      @pdev: the PCI device associated with the adapter
333  *      @rxq: the SGE free list to clean up
334  *
335  *      Release the buffers on an SGE free-buffer Rx queue.  HW fetching from
336  *      this queue should be stopped before calling this function.
337  */
338 static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
339 {
340         unsigned int cidx = q->cidx;
341
342         while (q->credits--) {
343                 struct rx_sw_desc *d = &q->sdesc[cidx];
344
345                 pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
346                                  q->buf_size, PCI_DMA_FROMDEVICE);
347                 if (q->use_pages) {
348                         put_page(d->pg_chunk.page);
349                         d->pg_chunk.page = NULL;
350                 } else {
351                         kfree_skb(d->skb);
352                         d->skb = NULL;
353                 }
354                 if (++cidx == q->size)
355                         cidx = 0;
356         }
357
358         if (q->pg_chunk.page) {
359                 __free_page(q->pg_chunk.page);
360                 q->pg_chunk.page = NULL;
361         }
362 }
363
364 /**
365  *      add_one_rx_buf - add a packet buffer to a free-buffer list
366  *      @va:  buffer start VA
367  *      @len: the buffer length
368  *      @d: the HW Rx descriptor to write
369  *      @sd: the SW Rx descriptor to write
370  *      @gen: the generation bit value
371  *      @pdev: the PCI device associated with the adapter
372  *
373  *      Add a buffer of the given length to the supplied HW and SW Rx
374  *      descriptors.
375  */
376 static inline void add_one_rx_buf(void *va, unsigned int len,
377                                   struct rx_desc *d, struct rx_sw_desc *sd,
378                                   unsigned int gen, struct pci_dev *pdev)
379 {
380         dma_addr_t mapping;
381
382         mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
383         pci_unmap_addr_set(sd, dma_addr, mapping);
384
385         d->addr_lo = cpu_to_be32(mapping);
386         d->addr_hi = cpu_to_be32((u64) mapping >> 32);
387         wmb();
388         d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
389         d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
390 }
391
392 static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
393 {
394         if (!q->pg_chunk.page) {
395                 q->pg_chunk.page = alloc_page(gfp);
396                 if (unlikely(!q->pg_chunk.page))
397                         return -ENOMEM;
398                 q->pg_chunk.va = page_address(q->pg_chunk.page);
399                 q->pg_chunk.offset = 0;
400         }
401         sd->pg_chunk = q->pg_chunk;
402
403         q->pg_chunk.offset += q->buf_size;
404         if (q->pg_chunk.offset == PAGE_SIZE)
405                 q->pg_chunk.page = NULL;
406         else {
407                 q->pg_chunk.va += q->buf_size;
408                 get_page(q->pg_chunk.page);
409         }
410         return 0;
411 }
412
413 /**
414  *      refill_fl - refill an SGE free-buffer list
415  *      @adapter: the adapter
416  *      @q: the free-list to refill
417  *      @n: the number of new buffers to allocate
418  *      @gfp: the gfp flags for allocating new buffers
419  *
420  *      (Re)populate an SGE free-buffer list with up to @n new packet buffers,
421  *      allocated with the supplied gfp flags.  The caller must assure that
422  *      @n does not exceed the queue's capacity.
423  */
424 static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
425 {
426         void *buf_start;
427         struct rx_sw_desc *sd = &q->sdesc[q->pidx];
428         struct rx_desc *d = &q->desc[q->pidx];
429
430         while (n--) {
431                 if (q->use_pages) {
432                         if (unlikely(alloc_pg_chunk(q, sd, gfp))) {
433 nomem:                          q->alloc_failed++;
434                                 break;
435                         }
436                         buf_start = sd->pg_chunk.va;
437                 } else {
438                         struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
439
440                         if (!skb)
441                                 goto nomem;
442
443                         sd->skb = skb;
444                         buf_start = skb->data;
445                 }
446
447                 add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
448                                adap->pdev);
449                 d++;
450                 sd++;
451                 if (++q->pidx == q->size) {
452                         q->pidx = 0;
453                         q->gen ^= 1;
454                         sd = q->sdesc;
455                         d = q->desc;
456                 }
457                 q->credits++;
458         }
459
460         t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
461 }
462
463 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
464 {
465         refill_fl(adap, fl, min(16U, fl->size - fl->credits), GFP_ATOMIC);
466 }
467
468 /**
469  *      recycle_rx_buf - recycle a receive buffer
470  *      @adapter: the adapter
471  *      @q: the SGE free list
472  *      @idx: index of buffer to recycle
473  *
474  *      Recycles the specified buffer on the given free list by adding it at
475  *      the next available slot on the list.
476  */
477 static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
478                            unsigned int idx)
479 {
480         struct rx_desc *from = &q->desc[idx];
481         struct rx_desc *to = &q->desc[q->pidx];
482
483         q->sdesc[q->pidx] = q->sdesc[idx];
484         to->addr_lo = from->addr_lo;    /* already big endian */
485         to->addr_hi = from->addr_hi;    /* likewise */
486         wmb();
487         to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
488         to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
489         q->credits++;
490
491         if (++q->pidx == q->size) {
492                 q->pidx = 0;
493                 q->gen ^= 1;
494         }
495         t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
496 }
497
498 /**
499  *      alloc_ring - allocate resources for an SGE descriptor ring
500  *      @pdev: the PCI device
501  *      @nelem: the number of descriptors
502  *      @elem_size: the size of each descriptor
503  *      @sw_size: the size of the SW state associated with each ring element
504  *      @phys: the physical address of the allocated ring
505  *      @metadata: address of the array holding the SW state for the ring
506  *
507  *      Allocates resources for an SGE descriptor ring, such as Tx queues,
508  *      free buffer lists, or response queues.  Each SGE ring requires
509  *      space for its HW descriptors plus, optionally, space for the SW state
510  *      associated with each HW entry (the metadata).  The function returns
511  *      three values: the virtual address for the HW ring (the return value
512  *      of the function), the physical address of the HW ring, and the address
513  *      of the SW ring.
514  */
515 static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
516                         size_t sw_size, dma_addr_t * phys, void *metadata)
517 {
518         size_t len = nelem * elem_size;
519         void *s = NULL;
520         void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
521
522         if (!p)
523                 return NULL;
524         if (sw_size) {
525                 s = kcalloc(nelem, sw_size, GFP_KERNEL);
526
527                 if (!s) {
528                         dma_free_coherent(&pdev->dev, len, p, *phys);
529                         return NULL;
530                 }
531         }
532         if (metadata)
533                 *(void **)metadata = s;
534         memset(p, 0, len);
535         return p;
536 }
537
538 /**
539  *      free_qset - free the resources of an SGE queue set
540  *      @adapter: the adapter owning the queue set
541  *      @q: the queue set
542  *
543  *      Release the HW and SW resources associated with an SGE queue set, such
544  *      as HW contexts, packet buffers, and descriptor rings.  Traffic to the
545  *      queue set must be quiesced prior to calling this.
546  */
547 void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
548 {
549         int i;
550         struct pci_dev *pdev = adapter->pdev;
551
552         if (q->tx_reclaim_timer.function)
553                 del_timer_sync(&q->tx_reclaim_timer);
554
555         for (i = 0; i < SGE_RXQ_PER_SET; ++i)
556                 if (q->fl[i].desc) {
557                         spin_lock(&adapter->sge.reg_lock);
558                         t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
559                         spin_unlock(&adapter->sge.reg_lock);
560                         free_rx_bufs(pdev, &q->fl[i]);
561                         kfree(q->fl[i].sdesc);
562                         dma_free_coherent(&pdev->dev,
563                                           q->fl[i].size *
564                                           sizeof(struct rx_desc), q->fl[i].desc,
565                                           q->fl[i].phys_addr);
566                 }
567
568         for (i = 0; i < SGE_TXQ_PER_SET; ++i)
569                 if (q->txq[i].desc) {
570                         spin_lock(&adapter->sge.reg_lock);
571                         t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
572                         spin_unlock(&adapter->sge.reg_lock);
573                         if (q->txq[i].sdesc) {
574                                 free_tx_desc(adapter, &q->txq[i],
575                                              q->txq[i].in_use);
576                                 kfree(q->txq[i].sdesc);
577                         }
578                         dma_free_coherent(&pdev->dev,
579                                           q->txq[i].size *
580                                           sizeof(struct tx_desc),
581                                           q->txq[i].desc, q->txq[i].phys_addr);
582                         __skb_queue_purge(&q->txq[i].sendq);
583                 }
584
585         if (q->rspq.desc) {
586                 spin_lock(&adapter->sge.reg_lock);
587                 t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
588                 spin_unlock(&adapter->sge.reg_lock);
589                 dma_free_coherent(&pdev->dev,
590                                   q->rspq.size * sizeof(struct rsp_desc),
591                                   q->rspq.desc, q->rspq.phys_addr);
592         }
593
594         if (q->netdev)
595                 q->netdev->atalk_ptr = NULL;
596
597         memset(q, 0, sizeof(*q));
598 }
599
600 /**
601  *      init_qset_cntxt - initialize an SGE queue set context info
602  *      @qs: the queue set
603  *      @id: the queue set id
604  *
605  *      Initializes the TIDs and context ids for the queues of a queue set.
606  */
607 static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
608 {
609         qs->rspq.cntxt_id = id;
610         qs->fl[0].cntxt_id = 2 * id;
611         qs->fl[1].cntxt_id = 2 * id + 1;
612         qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
613         qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
614         qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
615         qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
616         qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
617 }
618
619 /**
620  *      sgl_len - calculates the size of an SGL of the given capacity
621  *      @n: the number of SGL entries
622  *
623  *      Calculates the number of flits needed for a scatter/gather list that
624  *      can hold the given number of entries.
625  */
626 static inline unsigned int sgl_len(unsigned int n)
627 {
628         /* alternatively: 3 * (n / 2) + 2 * (n & 1) */
629         return (3 * n) / 2 + (n & 1);
630 }
631
632 /**
633  *      flits_to_desc - returns the num of Tx descriptors for the given flits
634  *      @n: the number of flits
635  *
636  *      Calculates the number of Tx descriptors needed for the supplied number
637  *      of flits.
638  */
639 static inline unsigned int flits_to_desc(unsigned int n)
640 {
641         BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
642         return flit_desc_map[n];
643 }
644
645 /**
646  *      get_packet - return the next ingress packet buffer from a free list
647  *      @adap: the adapter that received the packet
648  *      @fl: the SGE free list holding the packet
649  *      @len: the packet length including any SGE padding
650  *      @drop_thres: # of remaining buffers before we start dropping packets
651  *
652  *      Get the next packet from a free list and complete setup of the
653  *      sk_buff.  If the packet is small we make a copy and recycle the
654  *      original buffer, otherwise we use the original buffer itself.  If a
655  *      positive drop threshold is supplied packets are dropped and their
656  *      buffers recycled if (a) the number of remaining buffers is under the
657  *      threshold and the packet is too big to copy, or (b) the packet should
658  *      be copied but there is no memory for the copy.
659  */
660 static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
661                                   unsigned int len, unsigned int drop_thres)
662 {
663         struct sk_buff *skb = NULL;
664         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
665
666         prefetch(sd->skb->data);
667         fl->credits--;
668
669         if (len <= SGE_RX_COPY_THRES) {
670                 skb = alloc_skb(len, GFP_ATOMIC);
671                 if (likely(skb != NULL)) {
672                         __skb_put(skb, len);
673                         pci_dma_sync_single_for_cpu(adap->pdev,
674                                             pci_unmap_addr(sd, dma_addr), len,
675                                             PCI_DMA_FROMDEVICE);
676                         memcpy(skb->data, sd->skb->data, len);
677                         pci_dma_sync_single_for_device(adap->pdev,
678                                             pci_unmap_addr(sd, dma_addr), len,
679                                             PCI_DMA_FROMDEVICE);
680                 } else if (!drop_thres)
681                         goto use_orig_buf;
682 recycle:
683                 recycle_rx_buf(adap, fl, fl->cidx);
684                 return skb;
685         }
686
687         if (unlikely(fl->credits < drop_thres))
688                 goto recycle;
689
690 use_orig_buf:
691         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
692                          fl->buf_size, PCI_DMA_FROMDEVICE);
693         skb = sd->skb;
694         skb_put(skb, len);
695         __refill_fl(adap, fl);
696         return skb;
697 }
698
699 /**
700  *      get_packet_pg - return the next ingress packet buffer from a free list
701  *      @adap: the adapter that received the packet
702  *      @fl: the SGE free list holding the packet
703  *      @len: the packet length including any SGE padding
704  *      @drop_thres: # of remaining buffers before we start dropping packets
705  *
706  *      Get the next packet from a free list populated with page chunks.
707  *      If the packet is small we make a copy and recycle the original buffer,
708  *      otherwise we attach the original buffer as a page fragment to a fresh
709  *      sk_buff.  If a positive drop threshold is supplied packets are dropped
710  *      and their buffers recycled if (a) the number of remaining buffers is
711  *      under the threshold and the packet is too big to copy, or (b) there's
712  *      no system memory.
713  *
714  *      Note: this function is similar to @get_packet but deals with Rx buffers
715  *      that are page chunks rather than sk_buffs.
716  */
717 static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
718                                      unsigned int len, unsigned int drop_thres)
719 {
720         struct sk_buff *skb = NULL;
721         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
722
723         if (len <= SGE_RX_COPY_THRES) {
724                 skb = alloc_skb(len, GFP_ATOMIC);
725                 if (likely(skb != NULL)) {
726                         __skb_put(skb, len);
727                         pci_dma_sync_single_for_cpu(adap->pdev,
728                                             pci_unmap_addr(sd, dma_addr), len,
729                                             PCI_DMA_FROMDEVICE);
730                         memcpy(skb->data, sd->pg_chunk.va, len);
731                         pci_dma_sync_single_for_device(adap->pdev,
732                                             pci_unmap_addr(sd, dma_addr), len,
733                                             PCI_DMA_FROMDEVICE);
734                 } else if (!drop_thres)
735                         return NULL;
736 recycle:
737                 fl->credits--;
738                 recycle_rx_buf(adap, fl, fl->cidx);
739                 return skb;
740         }
741
742         if (unlikely(fl->credits <= drop_thres))
743                 goto recycle;
744
745         skb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
746         if (unlikely(!skb)) {
747                 if (!drop_thres)
748                         return NULL;
749                 goto recycle;
750         }
751
752         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
753                          fl->buf_size, PCI_DMA_FROMDEVICE);
754         __skb_put(skb, SGE_RX_PULL_LEN);
755         memcpy(skb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
756         skb_fill_page_desc(skb, 0, sd->pg_chunk.page,
757                            sd->pg_chunk.offset + SGE_RX_PULL_LEN,
758                            len - SGE_RX_PULL_LEN);
759         skb->len = len;
760         skb->data_len = len - SGE_RX_PULL_LEN;
761         skb->truesize += skb->data_len;
762
763         fl->credits--;
764         /*
765          * We do not refill FLs here, we let the caller do it to overlap a
766          * prefetch.
767          */
768         return skb;
769 }
770
771 /**
772  *      get_imm_packet - return the next ingress packet buffer from a response
773  *      @resp: the response descriptor containing the packet data
774  *
775  *      Return a packet containing the immediate data of the given response.
776  */
777 static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
778 {
779         struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
780
781         if (skb) {
782                 __skb_put(skb, IMMED_PKT_SIZE);
783                 skb_copy_to_linear_data(skb, resp->imm_data, IMMED_PKT_SIZE);
784         }
785         return skb;
786 }
787
788 /**
789  *      calc_tx_descs - calculate the number of Tx descriptors for a packet
790  *      @skb: the packet
791  *
792  *      Returns the number of Tx descriptors needed for the given Ethernet
793  *      packet.  Ethernet packets require addition of WR and CPL headers.
794  */
795 static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
796 {
797         unsigned int flits;
798
799         if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
800                 return 1;
801
802         flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
803         if (skb_shinfo(skb)->gso_size)
804                 flits++;
805         return flits_to_desc(flits);
806 }
807
808 /**
809  *      make_sgl - populate a scatter/gather list for a packet
810  *      @skb: the packet
811  *      @sgp: the SGL to populate
812  *      @start: start address of skb main body data to include in the SGL
813  *      @len: length of skb main body data to include in the SGL
814  *      @pdev: the PCI device
815  *
816  *      Generates a scatter/gather list for the buffers that make up a packet
817  *      and returns the SGL size in 8-byte words.  The caller must size the SGL
818  *      appropriately.
819  */
820 static inline unsigned int make_sgl(const struct sk_buff *skb,
821                                     struct sg_ent *sgp, unsigned char *start,
822                                     unsigned int len, struct pci_dev *pdev)
823 {
824         dma_addr_t mapping;
825         unsigned int i, j = 0, nfrags;
826
827         if (len) {
828                 mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
829                 sgp->len[0] = cpu_to_be32(len);
830                 sgp->addr[0] = cpu_to_be64(mapping);
831                 j = 1;
832         }
833
834         nfrags = skb_shinfo(skb)->nr_frags;
835         for (i = 0; i < nfrags; i++) {
836                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
837
838                 mapping = pci_map_page(pdev, frag->page, frag->page_offset,
839                                        frag->size, PCI_DMA_TODEVICE);
840                 sgp->len[j] = cpu_to_be32(frag->size);
841                 sgp->addr[j] = cpu_to_be64(mapping);
842                 j ^= 1;
843                 if (j == 0)
844                         ++sgp;
845         }
846         if (j)
847                 sgp->len[j] = 0;
848         return ((nfrags + (len != 0)) * 3) / 2 + j;
849 }
850
851 /**
852  *      check_ring_tx_db - check and potentially ring a Tx queue's doorbell
853  *      @adap: the adapter
854  *      @q: the Tx queue
855  *
856  *      Ring the doorbel if a Tx queue is asleep.  There is a natural race,
857  *      where the HW is going to sleep just after we checked, however,
858  *      then the interrupt handler will detect the outstanding TX packet
859  *      and ring the doorbell for us.
860  *
861  *      When GTS is disabled we unconditionally ring the doorbell.
862  */
863 static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
864 {
865 #if USE_GTS
866         clear_bit(TXQ_LAST_PKT_DB, &q->flags);
867         if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
868                 set_bit(TXQ_LAST_PKT_DB, &q->flags);
869                 t3_write_reg(adap, A_SG_KDOORBELL,
870                              F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
871         }
872 #else
873         wmb();                  /* write descriptors before telling HW */
874         t3_write_reg(adap, A_SG_KDOORBELL,
875                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
876 #endif
877 }
878
879 static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
880 {
881 #if SGE_NUM_GENBITS == 2
882         d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
883 #endif
884 }
885
886 /**
887  *      write_wr_hdr_sgl - write a WR header and, optionally, SGL
888  *      @ndesc: number of Tx descriptors spanned by the SGL
889  *      @skb: the packet corresponding to the WR
890  *      @d: first Tx descriptor to be written
891  *      @pidx: index of above descriptors
892  *      @q: the SGE Tx queue
893  *      @sgl: the SGL
894  *      @flits: number of flits to the start of the SGL in the first descriptor
895  *      @sgl_flits: the SGL size in flits
896  *      @gen: the Tx descriptor generation
897  *      @wr_hi: top 32 bits of WR header based on WR type (big endian)
898  *      @wr_lo: low 32 bits of WR header based on WR type (big endian)
899  *
900  *      Write a work request header and an associated SGL.  If the SGL is
901  *      small enough to fit into one Tx descriptor it has already been written
902  *      and we just need to write the WR header.  Otherwise we distribute the
903  *      SGL across the number of descriptors it spans.
904  */
905 static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
906                              struct tx_desc *d, unsigned int pidx,
907                              const struct sge_txq *q,
908                              const struct sg_ent *sgl,
909                              unsigned int flits, unsigned int sgl_flits,
910                              unsigned int gen, unsigned int wr_hi,
911                              unsigned int wr_lo)
912 {
913         struct work_request_hdr *wrp = (struct work_request_hdr *)d;
914         struct tx_sw_desc *sd = &q->sdesc[pidx];
915
916         sd->skb = skb;
917         if (need_skb_unmap()) {
918                 struct unmap_info *ui = (struct unmap_info *)skb->cb;
919
920                 ui->fragidx = 0;
921                 ui->addr_idx = 0;
922                 ui->sflit = flits;
923         }
924
925         if (likely(ndesc == 1)) {
926                 skb->priority = pidx;
927                 wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
928                                    V_WR_SGLSFLT(flits)) | wr_hi;
929                 wmb();
930                 wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
931                                    V_WR_GEN(gen)) | wr_lo;
932                 wr_gen2(d, gen);
933         } else {
934                 unsigned int ogen = gen;
935                 const u64 *fp = (const u64 *)sgl;
936                 struct work_request_hdr *wp = wrp;
937
938                 wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
939                                    V_WR_SGLSFLT(flits)) | wr_hi;
940
941                 while (sgl_flits) {
942                         unsigned int avail = WR_FLITS - flits;
943
944                         if (avail > sgl_flits)
945                                 avail = sgl_flits;
946                         memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
947                         sgl_flits -= avail;
948                         ndesc--;
949                         if (!sgl_flits)
950                                 break;
951
952                         fp += avail;
953                         d++;
954                         sd++;
955                         if (++pidx == q->size) {
956                                 pidx = 0;
957                                 gen ^= 1;
958                                 d = q->desc;
959                                 sd = q->sdesc;
960                         }
961
962                         sd->skb = skb;
963                         wrp = (struct work_request_hdr *)d;
964                         wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
965                                            V_WR_SGLSFLT(1)) | wr_hi;
966                         wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
967                                                         sgl_flits + 1)) |
968                                            V_WR_GEN(gen)) | wr_lo;
969                         wr_gen2(d, gen);
970                         flits = 1;
971                 }
972                 skb->priority = pidx;
973                 wrp->wr_hi |= htonl(F_WR_EOP);
974                 wmb();
975                 wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
976                 wr_gen2((struct tx_desc *)wp, ogen);
977                 WARN_ON(ndesc != 0);
978         }
979 }
980
981 /**
982  *      write_tx_pkt_wr - write a TX_PKT work request
983  *      @adap: the adapter
984  *      @skb: the packet to send
985  *      @pi: the egress interface
986  *      @pidx: index of the first Tx descriptor to write
987  *      @gen: the generation value to use
988  *      @q: the Tx queue
989  *      @ndesc: number of descriptors the packet will occupy
990  *      @compl: the value of the COMPL bit to use
991  *
992  *      Generate a TX_PKT work request to send the supplied packet.
993  */
994 static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
995                             const struct port_info *pi,
996                             unsigned int pidx, unsigned int gen,
997                             struct sge_txq *q, unsigned int ndesc,
998                             unsigned int compl)
999 {
1000         unsigned int flits, sgl_flits, cntrl, tso_info;
1001         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1002         struct tx_desc *d = &q->desc[pidx];
1003         struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
1004
1005         cpl->len = htonl(skb->len | 0x80000000);
1006         cntrl = V_TXPKT_INTF(pi->port_id);
1007
1008         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1009                 cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
1010
1011         tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
1012         if (tso_info) {
1013                 int eth_type;
1014                 struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
1015
1016                 d->flit[2] = 0;
1017                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
1018                 hdr->cntrl = htonl(cntrl);
1019                 eth_type = skb_network_offset(skb) == ETH_HLEN ?
1020                     CPL_ETH_II : CPL_ETH_II_VLAN;
1021                 tso_info |= V_LSO_ETH_TYPE(eth_type) |
1022                     V_LSO_IPHDR_WORDS(ip_hdr(skb)->ihl) |
1023                     V_LSO_TCPHDR_WORDS(tcp_hdr(skb)->doff);
1024                 hdr->lso_info = htonl(tso_info);
1025                 flits = 3;
1026         } else {
1027                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
1028                 cntrl |= F_TXPKT_IPCSUM_DIS;    /* SW calculates IP csum */
1029                 cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
1030                 cpl->cntrl = htonl(cntrl);
1031
1032                 if (skb->len <= WR_LEN - sizeof(*cpl)) {
1033                         q->sdesc[pidx].skb = NULL;
1034                         if (!skb->data_len)
1035                                 skb_copy_from_linear_data(skb, &d->flit[2],
1036                                                           skb->len);
1037                         else
1038                                 skb_copy_bits(skb, 0, &d->flit[2], skb->len);
1039
1040                         flits = (skb->len + 7) / 8 + 2;
1041                         cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
1042                                               V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
1043                                               | F_WR_SOP | F_WR_EOP | compl);
1044                         wmb();
1045                         cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
1046                                               V_WR_TID(q->token));
1047                         wr_gen2(d, gen);
1048                         kfree_skb(skb);
1049                         return;
1050                 }
1051
1052                 flits = 2;
1053         }
1054
1055         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1056         sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
1057         if (need_skb_unmap())
1058                 ((struct unmap_info *)skb->cb)->len = skb_headlen(skb);
1059
1060         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
1061                          htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
1062                          htonl(V_WR_TID(q->token)));
1063 }
1064
1065 /**
1066  *      eth_xmit - add a packet to the Ethernet Tx queue
1067  *      @skb: the packet
1068  *      @dev: the egress net device
1069  *
1070  *      Add a packet to an SGE Tx queue.  Runs with softirqs disabled.
1071  */
1072 int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
1073 {
1074         unsigned int ndesc, pidx, credits, gen, compl;
1075         const struct port_info *pi = netdev_priv(dev);
1076         struct adapter *adap = dev->priv;
1077         struct sge_qset *qs = dev2qset(dev);
1078         struct sge_txq *q = &qs->txq[TXQ_ETH];
1079
1080         /*
1081          * The chip min packet length is 9 octets but play safe and reject
1082          * anything shorter than an Ethernet header.
1083          */
1084         if (unlikely(skb->len < ETH_HLEN)) {
1085                 dev_kfree_skb(skb);
1086                 return NETDEV_TX_OK;
1087         }
1088
1089         spin_lock(&q->lock);
1090         reclaim_completed_tx(adap, q);
1091
1092         credits = q->size - q->in_use;
1093         ndesc = calc_tx_descs(skb);
1094
1095         if (unlikely(credits < ndesc)) {
1096                 if (!netif_queue_stopped(dev)) {
1097                         netif_stop_queue(dev);
1098                         set_bit(TXQ_ETH, &qs->txq_stopped);
1099                         q->stops++;
1100                         dev_err(&adap->pdev->dev,
1101                                 "%s: Tx ring %u full while queue awake!\n",
1102                                 dev->name, q->cntxt_id & 7);
1103                 }
1104                 spin_unlock(&q->lock);
1105                 return NETDEV_TX_BUSY;
1106         }
1107
1108         q->in_use += ndesc;
1109         if (unlikely(credits - ndesc < q->stop_thres)) {
1110                 q->stops++;
1111                 netif_stop_queue(dev);
1112                 set_bit(TXQ_ETH, &qs->txq_stopped);
1113 #if !USE_GTS
1114                 if (should_restart_tx(q) &&
1115                     test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1116                         q->restarts++;
1117                         netif_wake_queue(dev);
1118                 }
1119 #endif
1120         }
1121
1122         gen = q->gen;
1123         q->unacked += ndesc;
1124         compl = (q->unacked & 8) << (S_WR_COMPL - 3);
1125         q->unacked &= 7;
1126         pidx = q->pidx;
1127         q->pidx += ndesc;
1128         if (q->pidx >= q->size) {
1129                 q->pidx -= q->size;
1130                 q->gen ^= 1;
1131         }
1132
1133         /* update port statistics */
1134         if (skb->ip_summed == CHECKSUM_COMPLETE)
1135                 qs->port_stats[SGE_PSTAT_TX_CSUM]++;
1136         if (skb_shinfo(skb)->gso_size)
1137                 qs->port_stats[SGE_PSTAT_TSO]++;
1138         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1139                 qs->port_stats[SGE_PSTAT_VLANINS]++;
1140
1141         dev->trans_start = jiffies;
1142         spin_unlock(&q->lock);
1143
1144         /*
1145          * We do not use Tx completion interrupts to free DMAd Tx packets.
1146          * This is good for performamce but means that we rely on new Tx
1147          * packets arriving to run the destructors of completed packets,
1148          * which open up space in their sockets' send queues.  Sometimes
1149          * we do not get such new packets causing Tx to stall.  A single
1150          * UDP transmitter is a good example of this situation.  We have
1151          * a clean up timer that periodically reclaims completed packets
1152          * but it doesn't run often enough (nor do we want it to) to prevent
1153          * lengthy stalls.  A solution to this problem is to run the
1154          * destructor early, after the packet is queued but before it's DMAd.
1155          * A cons is that we lie to socket memory accounting, but the amount
1156          * of extra memory is reasonable (limited by the number of Tx
1157          * descriptors), the packets do actually get freed quickly by new
1158          * packets almost always, and for protocols like TCP that wait for
1159          * acks to really free up the data the extra memory is even less.
1160          * On the positive side we run the destructors on the sending CPU
1161          * rather than on a potentially different completing CPU, usually a
1162          * good thing.  We also run them without holding our Tx queue lock,
1163          * unlike what reclaim_completed_tx() would otherwise do.
1164          *
1165          * Run the destructor before telling the DMA engine about the packet
1166          * to make sure it doesn't complete and get freed prematurely.
1167          */
1168         if (likely(!skb_shared(skb)))
1169                 skb_orphan(skb);
1170
1171         write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
1172         check_ring_tx_db(adap, q);
1173         return NETDEV_TX_OK;
1174 }
1175
1176 /**
1177  *      write_imm - write a packet into a Tx descriptor as immediate data
1178  *      @d: the Tx descriptor to write
1179  *      @skb: the packet
1180  *      @len: the length of packet data to write as immediate data
1181  *      @gen: the generation bit value to write
1182  *
1183  *      Writes a packet as immediate data into a Tx descriptor.  The packet
1184  *      contains a work request at its beginning.  We must write the packet
1185  *      carefully so the SGE doesn't read accidentally before it's written in
1186  *      its entirety.
1187  */
1188 static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
1189                              unsigned int len, unsigned int gen)
1190 {
1191         struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
1192         struct work_request_hdr *to = (struct work_request_hdr *)d;
1193
1194         memcpy(&to[1], &from[1], len - sizeof(*from));
1195         to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
1196                                         V_WR_BCNTLFLT(len & 7));
1197         wmb();
1198         to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
1199                                         V_WR_LEN((len + 7) / 8));
1200         wr_gen2(d, gen);
1201         kfree_skb(skb);
1202 }
1203
1204 /**
1205  *      check_desc_avail - check descriptor availability on a send queue
1206  *      @adap: the adapter
1207  *      @q: the send queue
1208  *      @skb: the packet needing the descriptors
1209  *      @ndesc: the number of Tx descriptors needed
1210  *      @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
1211  *
1212  *      Checks if the requested number of Tx descriptors is available on an
1213  *      SGE send queue.  If the queue is already suspended or not enough
1214  *      descriptors are available the packet is queued for later transmission.
1215  *      Must be called with the Tx queue locked.
1216  *
1217  *      Returns 0 if enough descriptors are available, 1 if there aren't
1218  *      enough descriptors and the packet has been queued, and 2 if the caller
1219  *      needs to retry because there weren't enough descriptors at the
1220  *      beginning of the call but some freed up in the mean time.
1221  */
1222 static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
1223                                    struct sk_buff *skb, unsigned int ndesc,
1224                                    unsigned int qid)
1225 {
1226         if (unlikely(!skb_queue_empty(&q->sendq))) {
1227               addq_exit:__skb_queue_tail(&q->sendq, skb);
1228                 return 1;
1229         }
1230         if (unlikely(q->size - q->in_use < ndesc)) {
1231                 struct sge_qset *qs = txq_to_qset(q, qid);
1232
1233                 set_bit(qid, &qs->txq_stopped);
1234                 smp_mb__after_clear_bit();
1235
1236                 if (should_restart_tx(q) &&
1237                     test_and_clear_bit(qid, &qs->txq_stopped))
1238                         return 2;
1239
1240                 q->stops++;
1241                 goto addq_exit;
1242         }
1243         return 0;
1244 }
1245
1246 /**
1247  *      reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
1248  *      @q: the SGE control Tx queue
1249  *
1250  *      This is a variant of reclaim_completed_tx() that is used for Tx queues
1251  *      that send only immediate data (presently just the control queues) and
1252  *      thus do not have any sk_buffs to release.
1253  */
1254 static inline void reclaim_completed_tx_imm(struct sge_txq *q)
1255 {
1256         unsigned int reclaim = q->processed - q->cleaned;
1257
1258         q->in_use -= reclaim;
1259         q->cleaned += reclaim;
1260 }
1261
1262 static inline int immediate(const struct sk_buff *skb)
1263 {
1264         return skb->len <= WR_LEN && !skb->data_len;
1265 }
1266
1267 /**
1268  *      ctrl_xmit - send a packet through an SGE control Tx queue
1269  *      @adap: the adapter
1270  *      @q: the control queue
1271  *      @skb: the packet
1272  *
1273  *      Send a packet through an SGE control Tx queue.  Packets sent through
1274  *      a control queue must fit entirely as immediate data in a single Tx
1275  *      descriptor and have no page fragments.
1276  */
1277 static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
1278                      struct sk_buff *skb)
1279 {
1280         int ret;
1281         struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
1282
1283         if (unlikely(!immediate(skb))) {
1284                 WARN_ON(1);
1285                 dev_kfree_skb(skb);
1286                 return NET_XMIT_SUCCESS;
1287         }
1288
1289         wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
1290         wrp->wr_lo = htonl(V_WR_TID(q->token));
1291
1292         spin_lock(&q->lock);
1293       again:reclaim_completed_tx_imm(q);
1294
1295         ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
1296         if (unlikely(ret)) {
1297                 if (ret == 1) {
1298                         spin_unlock(&q->lock);
1299                         return NET_XMIT_CN;
1300                 }
1301                 goto again;
1302         }
1303
1304         write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1305
1306         q->in_use++;
1307         if (++q->pidx >= q->size) {
1308                 q->pidx = 0;
1309                 q->gen ^= 1;
1310         }
1311         spin_unlock(&q->lock);
1312         wmb();
1313         t3_write_reg(adap, A_SG_KDOORBELL,
1314                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1315         return NET_XMIT_SUCCESS;
1316 }
1317
1318 /**
1319  *      restart_ctrlq - restart a suspended control queue
1320  *      @qs: the queue set cotaining the control queue
1321  *
1322  *      Resumes transmission on a suspended Tx control queue.
1323  */
1324 static void restart_ctrlq(unsigned long data)
1325 {
1326         struct sk_buff *skb;
1327         struct sge_qset *qs = (struct sge_qset *)data;
1328         struct sge_txq *q = &qs->txq[TXQ_CTRL];
1329         struct adapter *adap = qs->netdev->priv;
1330
1331         spin_lock(&q->lock);
1332       again:reclaim_completed_tx_imm(q);
1333
1334         while (q->in_use < q->size && (skb = __skb_dequeue(&q->sendq)) != NULL) {
1335
1336                 write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1337
1338                 if (++q->pidx >= q->size) {
1339                         q->pidx = 0;
1340                         q->gen ^= 1;
1341                 }
1342                 q->in_use++;
1343         }
1344
1345         if (!skb_queue_empty(&q->sendq)) {
1346                 set_bit(TXQ_CTRL, &qs->txq_stopped);
1347                 smp_mb__after_clear_bit();
1348
1349                 if (should_restart_tx(q) &&
1350                     test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
1351                         goto again;
1352                 q->stops++;
1353         }
1354
1355         spin_unlock(&q->lock);
1356         t3_write_reg(adap, A_SG_KDOORBELL,
1357                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1358 }
1359
1360 /*
1361  * Send a management message through control queue 0
1362  */
1363 int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
1364 {
1365         return ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
1366 }
1367
1368 /**
1369  *      deferred_unmap_destructor - unmap a packet when it is freed
1370  *      @skb: the packet
1371  *
1372  *      This is the packet destructor used for Tx packets that need to remain
1373  *      mapped until they are freed rather than until their Tx descriptors are
1374  *      freed.
1375  */
1376 static void deferred_unmap_destructor(struct sk_buff *skb)
1377 {
1378         int i;
1379         const dma_addr_t *p;
1380         const struct skb_shared_info *si;
1381         const struct deferred_unmap_info *dui;
1382         const struct unmap_info *ui = (struct unmap_info *)skb->cb;
1383
1384         dui = (struct deferred_unmap_info *)skb->head;
1385         p = dui->addr;
1386
1387         if (ui->len)
1388                 pci_unmap_single(dui->pdev, *p++, ui->len, PCI_DMA_TODEVICE);
1389
1390         si = skb_shinfo(skb);
1391         for (i = 0; i < si->nr_frags; i++)
1392                 pci_unmap_page(dui->pdev, *p++, si->frags[i].size,
1393                                PCI_DMA_TODEVICE);
1394 }
1395
1396 static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
1397                                      const struct sg_ent *sgl, int sgl_flits)
1398 {
1399         dma_addr_t *p;
1400         struct deferred_unmap_info *dui;
1401
1402         dui = (struct deferred_unmap_info *)skb->head;
1403         dui->pdev = pdev;
1404         for (p = dui->addr; sgl_flits >= 3; sgl++, sgl_flits -= 3) {
1405                 *p++ = be64_to_cpu(sgl->addr[0]);
1406                 *p++ = be64_to_cpu(sgl->addr[1]);
1407         }
1408         if (sgl_flits)
1409                 *p = be64_to_cpu(sgl->addr[0]);
1410 }
1411
1412 /**
1413  *      write_ofld_wr - write an offload work request
1414  *      @adap: the adapter
1415  *      @skb: the packet to send
1416  *      @q: the Tx queue
1417  *      @pidx: index of the first Tx descriptor to write
1418  *      @gen: the generation value to use
1419  *      @ndesc: number of descriptors the packet will occupy
1420  *
1421  *      Write an offload work request to send the supplied packet.  The packet
1422  *      data already carry the work request with most fields populated.
1423  */
1424 static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
1425                           struct sge_txq *q, unsigned int pidx,
1426                           unsigned int gen, unsigned int ndesc)
1427 {
1428         unsigned int sgl_flits, flits;
1429         struct work_request_hdr *from;
1430         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1431         struct tx_desc *d = &q->desc[pidx];
1432
1433         if (immediate(skb)) {
1434                 q->sdesc[pidx].skb = NULL;
1435                 write_imm(d, skb, skb->len, gen);
1436                 return;
1437         }
1438
1439         /* Only TX_DATA builds SGLs */
1440
1441         from = (struct work_request_hdr *)skb->data;
1442         memcpy(&d->flit[1], &from[1],
1443                skb_transport_offset(skb) - sizeof(*from));
1444
1445         flits = skb_transport_offset(skb) / 8;
1446         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1447         sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
1448                              skb->tail - skb->transport_header,
1449                              adap->pdev);
1450         if (need_skb_unmap()) {
1451                 setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
1452                 skb->destructor = deferred_unmap_destructor;
1453                 ((struct unmap_info *)skb->cb)->len = (skb->tail -
1454                                                        skb->transport_header);
1455         }
1456
1457         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
1458                          gen, from->wr_hi, from->wr_lo);
1459 }
1460
1461 /**
1462  *      calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
1463  *      @skb: the packet
1464  *
1465  *      Returns the number of Tx descriptors needed for the given offload
1466  *      packet.  These packets are already fully constructed.
1467  */
1468 static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
1469 {
1470         unsigned int flits, cnt = skb_shinfo(skb)->nr_frags;
1471
1472         if (skb->len <= WR_LEN && cnt == 0)
1473                 return 1;       /* packet fits as immediate data */
1474
1475         flits = skb_transport_offset(skb) / 8;  /* headers */
1476         if (skb->tail != skb->transport_header)
1477                 cnt++;
1478         return flits_to_desc(flits + sgl_len(cnt));
1479 }
1480
1481 /**
1482  *      ofld_xmit - send a packet through an offload queue
1483  *      @adap: the adapter
1484  *      @q: the Tx offload queue
1485  *      @skb: the packet
1486  *
1487  *      Send an offload packet through an SGE offload queue.
1488  */
1489 static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
1490                      struct sk_buff *skb)
1491 {
1492         int ret;
1493         unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
1494
1495         spin_lock(&q->lock);
1496       again:reclaim_completed_tx(adap, q);
1497
1498         ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
1499         if (unlikely(ret)) {
1500                 if (ret == 1) {
1501                         skb->priority = ndesc;  /* save for restart */
1502                         spin_unlock(&q->lock);
1503                         return NET_XMIT_CN;
1504                 }
1505                 goto again;
1506         }
1507
1508         gen = q->gen;
1509         q->in_use += ndesc;
1510         pidx = q->pidx;
1511         q->pidx += ndesc;
1512         if (q->pidx >= q->size) {
1513                 q->pidx -= q->size;
1514                 q->gen ^= 1;
1515         }
1516         spin_unlock(&q->lock);
1517
1518         write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1519         check_ring_tx_db(adap, q);
1520         return NET_XMIT_SUCCESS;
1521 }
1522
1523 /**
1524  *      restart_offloadq - restart a suspended offload queue
1525  *      @qs: the queue set cotaining the offload queue
1526  *
1527  *      Resumes transmission on a suspended Tx offload queue.
1528  */
1529 static void restart_offloadq(unsigned long data)
1530 {
1531         struct sk_buff *skb;
1532         struct sge_qset *qs = (struct sge_qset *)data;
1533         struct sge_txq *q = &qs->txq[TXQ_OFLD];
1534         struct adapter *adap = qs->netdev->priv;
1535
1536         spin_lock(&q->lock);
1537       again:reclaim_completed_tx(adap, q);
1538
1539         while ((skb = skb_peek(&q->sendq)) != NULL) {
1540                 unsigned int gen, pidx;
1541                 unsigned int ndesc = skb->priority;
1542
1543                 if (unlikely(q->size - q->in_use < ndesc)) {
1544                         set_bit(TXQ_OFLD, &qs->txq_stopped);
1545                         smp_mb__after_clear_bit();
1546
1547                         if (should_restart_tx(q) &&
1548                             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
1549                                 goto again;
1550                         q->stops++;
1551                         break;
1552                 }
1553
1554                 gen = q->gen;
1555                 q->in_use += ndesc;
1556                 pidx = q->pidx;
1557                 q->pidx += ndesc;
1558                 if (q->pidx >= q->size) {
1559                         q->pidx -= q->size;
1560                         q->gen ^= 1;
1561                 }
1562                 __skb_unlink(skb, &q->sendq);
1563                 spin_unlock(&q->lock);
1564
1565                 write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1566                 spin_lock(&q->lock);
1567         }
1568         spin_unlock(&q->lock);
1569
1570 #if USE_GTS
1571         set_bit(TXQ_RUNNING, &q->flags);
1572         set_bit(TXQ_LAST_PKT_DB, &q->flags);
1573 #endif
1574         t3_write_reg(adap, A_SG_KDOORBELL,
1575                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1576 }
1577
1578 /**
1579  *      queue_set - return the queue set a packet should use
1580  *      @skb: the packet
1581  *
1582  *      Maps a packet to the SGE queue set it should use.  The desired queue
1583  *      set is carried in bits 1-3 in the packet's priority.
1584  */
1585 static inline int queue_set(const struct sk_buff *skb)
1586 {
1587         return skb->priority >> 1;
1588 }
1589
1590 /**
1591  *      is_ctrl_pkt - return whether an offload packet is a control packet
1592  *      @skb: the packet
1593  *
1594  *      Determines whether an offload packet should use an OFLD or a CTRL
1595  *      Tx queue.  This is indicated by bit 0 in the packet's priority.
1596  */
1597 static inline int is_ctrl_pkt(const struct sk_buff *skb)
1598 {
1599         return skb->priority & 1;
1600 }
1601
1602 /**
1603  *      t3_offload_tx - send an offload packet
1604  *      @tdev: the offload device to send to
1605  *      @skb: the packet
1606  *
1607  *      Sends an offload packet.  We use the packet priority to select the
1608  *      appropriate Tx queue as follows: bit 0 indicates whether the packet
1609  *      should be sent as regular or control, bits 1-3 select the queue set.
1610  */
1611 int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
1612 {
1613         struct adapter *adap = tdev2adap(tdev);
1614         struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
1615
1616         if (unlikely(is_ctrl_pkt(skb)))
1617                 return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
1618
1619         return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
1620 }
1621
1622 /**
1623  *      offload_enqueue - add an offload packet to an SGE offload receive queue
1624  *      @q: the SGE response queue
1625  *      @skb: the packet
1626  *
1627  *      Add a new offload packet to an SGE response queue's offload packet
1628  *      queue.  If the packet is the first on the queue it schedules the RX
1629  *      softirq to process the queue.
1630  */
1631 static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
1632 {
1633         skb->next = skb->prev = NULL;
1634         if (q->rx_tail)
1635                 q->rx_tail->next = skb;
1636         else {
1637                 struct sge_qset *qs = rspq_to_qset(q);
1638
1639                 if (__netif_rx_schedule_prep(qs->netdev))
1640                         __netif_rx_schedule(qs->netdev);
1641                 q->rx_head = skb;
1642         }
1643         q->rx_tail = skb;
1644 }
1645
1646 /**
1647  *      deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
1648  *      @tdev: the offload device that will be receiving the packets
1649  *      @q: the SGE response queue that assembled the bundle
1650  *      @skbs: the partial bundle
1651  *      @n: the number of packets in the bundle
1652  *
1653  *      Delivers a (partial) bundle of Rx offload packets to an offload device.
1654  */
1655 static inline void deliver_partial_bundle(struct t3cdev *tdev,
1656                                           struct sge_rspq *q,
1657                                           struct sk_buff *skbs[], int n)
1658 {
1659         if (n) {
1660                 q->offload_bundles++;
1661                 tdev->recv(tdev, skbs, n);
1662         }
1663 }
1664
1665 /**
1666  *      ofld_poll - NAPI handler for offload packets in interrupt mode
1667  *      @dev: the network device doing the polling
1668  *      @budget: polling budget
1669  *
1670  *      The NAPI handler for offload packets when a response queue is serviced
1671  *      by the hard interrupt handler, i.e., when it's operating in non-polling
1672  *      mode.  Creates small packet batches and sends them through the offload
1673  *      receive handler.  Batches need to be of modest size as we do prefetches
1674  *      on the packets in each.
1675  */
1676 static int ofld_poll(struct net_device *dev, int *budget)
1677 {
1678         struct adapter *adapter = dev->priv;
1679         struct sge_qset *qs = dev2qset(dev);
1680         struct sge_rspq *q = &qs->rspq;
1681         int work_done, limit = min(*budget, dev->quota), avail = limit;
1682
1683         while (avail) {
1684                 struct sk_buff *head, *tail, *skbs[RX_BUNDLE_SIZE];
1685                 int ngathered;
1686
1687                 spin_lock_irq(&q->lock);
1688                 head = q->rx_head;
1689                 if (!head) {
1690                         work_done = limit - avail;
1691                         *budget -= work_done;
1692                         dev->quota -= work_done;
1693                         __netif_rx_complete(dev);
1694                         spin_unlock_irq(&q->lock);
1695                         return 0;
1696                 }
1697
1698                 tail = q->rx_tail;
1699                 q->rx_head = q->rx_tail = NULL;
1700                 spin_unlock_irq(&q->lock);
1701
1702                 for (ngathered = 0; avail && head; avail--) {
1703                         prefetch(head->data);
1704                         skbs[ngathered] = head;
1705                         head = head->next;
1706                         skbs[ngathered]->next = NULL;
1707                         if (++ngathered == RX_BUNDLE_SIZE) {
1708                                 q->offload_bundles++;
1709                                 adapter->tdev.recv(&adapter->tdev, skbs,
1710                                                    ngathered);
1711                                 ngathered = 0;
1712                         }
1713                 }
1714                 if (head) {     /* splice remaining packets back onto Rx queue */
1715                         spin_lock_irq(&q->lock);
1716                         tail->next = q->rx_head;
1717                         if (!q->rx_head)
1718                                 q->rx_tail = tail;
1719                         q->rx_head = head;
1720                         spin_unlock_irq(&q->lock);
1721                 }
1722                 deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
1723         }
1724         work_done = limit - avail;
1725         *budget -= work_done;
1726         dev->quota -= work_done;
1727         return 1;
1728 }
1729
1730 /**
1731  *      rx_offload - process a received offload packet
1732  *      @tdev: the offload device receiving the packet
1733  *      @rq: the response queue that received the packet
1734  *      @skb: the packet
1735  *      @rx_gather: a gather list of packets if we are building a bundle
1736  *      @gather_idx: index of the next available slot in the bundle
1737  *
1738  *      Process an ingress offload pakcet and add it to the offload ingress
1739  *      queue.  Returns the index of the next available slot in the bundle.
1740  */
1741 static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
1742                              struct sk_buff *skb, struct sk_buff *rx_gather[],
1743                              unsigned int gather_idx)
1744 {
1745         rq->offload_pkts++;
1746         skb_reset_mac_header(skb);
1747         skb_reset_network_header(skb);
1748         skb_reset_transport_header(skb);
1749
1750         if (rq->polling) {
1751                 rx_gather[gather_idx++] = skb;
1752                 if (gather_idx == RX_BUNDLE_SIZE) {
1753                         tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
1754                         gather_idx = 0;
1755                         rq->offload_bundles++;
1756                 }
1757         } else
1758                 offload_enqueue(rq, skb);
1759
1760         return gather_idx;
1761 }
1762
1763 /**
1764  *      restart_tx - check whether to restart suspended Tx queues
1765  *      @qs: the queue set to resume
1766  *
1767  *      Restarts suspended Tx queues of an SGE queue set if they have enough
1768  *      free resources to resume operation.
1769  */
1770 static void restart_tx(struct sge_qset *qs)
1771 {
1772         if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
1773             should_restart_tx(&qs->txq[TXQ_ETH]) &&
1774             test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1775                 qs->txq[TXQ_ETH].restarts++;
1776                 if (netif_running(qs->netdev))
1777                         netif_wake_queue(qs->netdev);
1778         }
1779
1780         if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
1781             should_restart_tx(&qs->txq[TXQ_OFLD]) &&
1782             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
1783                 qs->txq[TXQ_OFLD].restarts++;
1784                 tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
1785         }
1786         if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
1787             should_restart_tx(&qs->txq[TXQ_CTRL]) &&
1788             test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
1789                 qs->txq[TXQ_CTRL].restarts++;
1790                 tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
1791         }
1792 }
1793
1794 /**
1795  *      rx_eth - process an ingress ethernet packet
1796  *      @adap: the adapter
1797  *      @rq: the response queue that received the packet
1798  *      @skb: the packet
1799  *      @pad: amount of padding at the start of the buffer
1800  *
1801  *      Process an ingress ethernet pakcet and deliver it to the stack.
1802  *      The padding is 2 if the packet was delivered in an Rx buffer and 0
1803  *      if it was immediate data in a response.
1804  */
1805 static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
1806                    struct sk_buff *skb, int pad)
1807 {
1808         struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
1809         struct port_info *pi;
1810
1811         skb_pull(skb, sizeof(*p) + pad);
1812         skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
1813         skb->dev->last_rx = jiffies;
1814         pi = netdev_priv(skb->dev);
1815         if (pi->rx_csum_offload && p->csum_valid && p->csum == 0xffff &&
1816             !p->fragment) {
1817                 rspq_to_qset(rq)->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
1818                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1819         } else
1820                 skb->ip_summed = CHECKSUM_NONE;
1821
1822         if (unlikely(p->vlan_valid)) {
1823                 struct vlan_group *grp = pi->vlan_grp;
1824
1825                 rspq_to_qset(rq)->port_stats[SGE_PSTAT_VLANEX]++;
1826                 if (likely(grp))
1827                         __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
1828                                           rq->polling);
1829                 else
1830                         dev_kfree_skb_any(skb);
1831         } else if (rq->polling)
1832                 netif_receive_skb(skb);
1833         else
1834                 netif_rx(skb);
1835 }
1836
1837 /**
1838  *      handle_rsp_cntrl_info - handles control information in a response
1839  *      @qs: the queue set corresponding to the response
1840  *      @flags: the response control flags
1841  *
1842  *      Handles the control information of an SGE response, such as GTS
1843  *      indications and completion credits for the queue set's Tx queues.
1844  *      HW coalesces credits, we don't do any extra SW coalescing.
1845  */
1846 static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
1847 {
1848         unsigned int credits;
1849
1850 #if USE_GTS
1851         if (flags & F_RSPD_TXQ0_GTS)
1852                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
1853 #endif
1854
1855         credits = G_RSPD_TXQ0_CR(flags);
1856         if (credits)
1857                 qs->txq[TXQ_ETH].processed += credits;
1858
1859         credits = G_RSPD_TXQ2_CR(flags);
1860         if (credits)
1861                 qs->txq[TXQ_CTRL].processed += credits;
1862
1863 # if USE_GTS
1864         if (flags & F_RSPD_TXQ1_GTS)
1865                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
1866 # endif
1867         credits = G_RSPD_TXQ1_CR(flags);
1868         if (credits)
1869                 qs->txq[TXQ_OFLD].processed += credits;
1870 }
1871
1872 /**
1873  *      check_ring_db - check if we need to ring any doorbells
1874  *      @adapter: the adapter
1875  *      @qs: the queue set whose Tx queues are to be examined
1876  *      @sleeping: indicates which Tx queue sent GTS
1877  *
1878  *      Checks if some of a queue set's Tx queues need to ring their doorbells
1879  *      to resume transmission after idling while they still have unprocessed
1880  *      descriptors.
1881  */
1882 static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
1883                           unsigned int sleeping)
1884 {
1885         if (sleeping & F_RSPD_TXQ0_GTS) {
1886                 struct sge_txq *txq = &qs->txq[TXQ_ETH];
1887
1888                 if (txq->cleaned + txq->in_use != txq->processed &&
1889                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
1890                         set_bit(TXQ_RUNNING, &txq->flags);
1891                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
1892                                      V_EGRCNTX(txq->cntxt_id));
1893                 }
1894         }
1895
1896         if (sleeping & F_RSPD_TXQ1_GTS) {
1897                 struct sge_txq *txq = &qs->txq[TXQ_OFLD];
1898
1899                 if (txq->cleaned + txq->in_use != txq->processed &&
1900                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
1901                         set_bit(TXQ_RUNNING, &txq->flags);
1902                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
1903                                      V_EGRCNTX(txq->cntxt_id));
1904                 }
1905         }
1906 }
1907
1908 /**
1909  *      is_new_response - check if a response is newly written
1910  *      @r: the response descriptor
1911  *      @q: the response queue
1912  *
1913  *      Returns true if a response descriptor contains a yet unprocessed
1914  *      response.
1915  */
1916 static inline int is_new_response(const struct rsp_desc *r,
1917                                   const struct sge_rspq *q)
1918 {
1919         return (r->intr_gen & F_RSPD_GEN2) == q->gen;
1920 }
1921
1922 #define RSPD_GTS_MASK  (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
1923 #define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
1924                         V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
1925                         V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
1926                         V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
1927
1928 /* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
1929 #define NOMEM_INTR_DELAY 2500
1930
1931 /**
1932  *      process_responses - process responses from an SGE response queue
1933  *      @adap: the adapter
1934  *      @qs: the queue set to which the response queue belongs
1935  *      @budget: how many responses can be processed in this round
1936  *
1937  *      Process responses from an SGE response queue up to the supplied budget.
1938  *      Responses include received packets as well as credits and other events
1939  *      for the queues that belong to the response queue's queue set.
1940  *      A negative budget is effectively unlimited.
1941  *
1942  *      Additionally choose the interrupt holdoff time for the next interrupt
1943  *      on this queue.  If the system is under memory shortage use a fairly
1944  *      long delay to help recovery.
1945  */
1946 static int process_responses(struct adapter *adap, struct sge_qset *qs,
1947                              int budget)
1948 {
1949         struct sge_rspq *q = &qs->rspq;
1950         struct rsp_desc *r = &q->desc[q->cidx];
1951         int budget_left = budget;
1952         unsigned int sleeping = 0;
1953         struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
1954         int ngathered = 0;
1955
1956         q->next_holdoff = q->holdoff_tmr;
1957
1958         while (likely(budget_left && is_new_response(r, q))) {
1959                 int eth, ethpad = 2;
1960                 struct sk_buff *skb = NULL;
1961                 u32 len, flags = ntohl(r->flags);
1962                 u32 rss_hi = *(const u32 *)r, rss_lo = r->rss_hdr.rss_hash_val;
1963
1964                 eth = r->rss_hdr.opcode == CPL_RX_PKT;
1965
1966                 if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
1967                         skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
1968                         if (!skb)
1969                                 goto no_mem;
1970
1971                         memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
1972                         skb->data[0] = CPL_ASYNC_NOTIF;
1973                         rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
1974                         q->async_notif++;
1975                 } else if (flags & F_RSPD_IMM_DATA_VALID) {
1976                         skb = get_imm_packet(r);
1977                         if (unlikely(!skb)) {
1978 no_mem:
1979                                 q->next_holdoff = NOMEM_INTR_DELAY;
1980                                 q->nomem++;
1981                                 /* consume one credit since we tried */
1982                                 budget_left--;
1983                                 break;
1984                         }
1985                         q->imm_data++;
1986                         ethpad = 0;
1987                 } else if ((len = ntohl(r->len_cq)) != 0) {
1988                         struct sge_fl *fl;
1989
1990                         fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
1991                         if (fl->use_pages) {
1992                                 void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
1993
1994                                 prefetch(addr);
1995 #if L1_CACHE_BYTES < 128
1996                                 prefetch(addr + L1_CACHE_BYTES);
1997 #endif
1998                                 __refill_fl(adap, fl);
1999
2000                                 skb = get_packet_pg(adap, fl, G_RSPD_LEN(len),
2001                                                  eth ? SGE_RX_DROP_THRES : 0);
2002                         } else
2003                                 skb = get_packet(adap, fl, G_RSPD_LEN(len),
2004                                                  eth ? SGE_RX_DROP_THRES : 0);
2005                         if (unlikely(!skb)) {
2006                                 if (!eth)
2007                                         goto no_mem;
2008                                 q->rx_drops++;
2009                         } else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
2010                                 __skb_pull(skb, 2);
2011
2012                         if (++fl->cidx == fl->size)
2013                                 fl->cidx = 0;
2014                 } else
2015                         q->pure_rsps++;
2016
2017                 if (flags & RSPD_CTRL_MASK) {
2018                         sleeping |= flags & RSPD_GTS_MASK;
2019                         handle_rsp_cntrl_info(qs, flags);
2020                 }
2021
2022                 r++;
2023                 if (unlikely(++q->cidx == q->size)) {
2024                         q->cidx = 0;
2025                         q->gen ^= 1;
2026                         r = q->desc;
2027                 }
2028                 prefetch(r);
2029
2030                 if (++q->credits >= (q->size / 4)) {
2031                         refill_rspq(adap, q, q->credits);
2032                         q->credits = 0;
2033                 }
2034
2035                 if (likely(skb != NULL)) {
2036                         if (eth)
2037                                 rx_eth(adap, q, skb, ethpad);
2038                         else {
2039                                 /* Preserve the RSS info in csum & priority */
2040                                 skb->csum = rss_hi;
2041                                 skb->priority = rss_lo;
2042                                 ngathered = rx_offload(&adap->tdev, q, skb,
2043                                                        offload_skbs,
2044                                                        ngathered);
2045                         }
2046                 }
2047                 --budget_left;
2048         }
2049
2050         deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
2051         if (sleeping)
2052                 check_ring_db(adap, qs, sleeping);
2053
2054         smp_mb();               /* commit Tx queue .processed updates */
2055         if (unlikely(qs->txq_stopped != 0))
2056                 restart_tx(qs);
2057
2058         budget -= budget_left;
2059         return budget;
2060 }
2061
2062 static inline int is_pure_response(const struct rsp_desc *r)
2063 {
2064         u32 n = ntohl(r->flags) & (F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
2065
2066         return (n | r->len_cq) == 0;
2067 }
2068
2069 /**
2070  *      napi_rx_handler - the NAPI handler for Rx processing
2071  *      @dev: the net device
2072  *      @budget: how many packets we can process in this round
2073  *
2074  *      Handler for new data events when using NAPI.
2075  */
2076 static int napi_rx_handler(struct net_device *dev, int *budget)
2077 {
2078         struct adapter *adap = dev->priv;
2079         struct sge_qset *qs = dev2qset(dev);
2080         int effective_budget = min(*budget, dev->quota);
2081
2082         int work_done = process_responses(adap, qs, effective_budget);
2083         *budget -= work_done;
2084         dev->quota -= work_done;
2085
2086         if (work_done >= effective_budget)
2087                 return 1;
2088
2089         netif_rx_complete(dev);
2090
2091         /*
2092          * Because we don't atomically flush the following write it is
2093          * possible that in very rare cases it can reach the device in a way
2094          * that races with a new response being written plus an error interrupt
2095          * causing the NAPI interrupt handler below to return unhandled status
2096          * to the OS.  To protect against this would require flushing the write
2097          * and doing both the write and the flush with interrupts off.  Way too
2098          * expensive and unjustifiable given the rarity of the race.
2099          *
2100          * The race cannot happen at all with MSI-X.
2101          */
2102         t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
2103                      V_NEWTIMER(qs->rspq.next_holdoff) |
2104                      V_NEWINDEX(qs->rspq.cidx));
2105         return 0;
2106 }
2107
2108 /*
2109  * Returns true if the device is already scheduled for polling.
2110  */
2111 static inline int napi_is_scheduled(struct net_device *dev)
2112 {
2113         return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
2114 }
2115
2116 /**
2117  *      process_pure_responses - process pure responses from a response queue
2118  *      @adap: the adapter
2119  *      @qs: the queue set owning the response queue
2120  *      @r: the first pure response to process
2121  *
2122  *      A simpler version of process_responses() that handles only pure (i.e.,
2123  *      non data-carrying) responses.  Such respones are too light-weight to
2124  *      justify calling a softirq under NAPI, so we handle them specially in
2125  *      the interrupt handler.  The function is called with a pointer to a
2126  *      response, which the caller must ensure is a valid pure response.
2127  *
2128  *      Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
2129  */
2130 static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
2131                                   struct rsp_desc *r)
2132 {
2133         struct sge_rspq *q = &qs->rspq;
2134         unsigned int sleeping = 0;
2135
2136         do {
2137                 u32 flags = ntohl(r->flags);
2138
2139                 r++;
2140                 if (unlikely(++q->cidx == q->size)) {
2141                         q->cidx = 0;
2142                         q->gen ^= 1;
2143                         r = q->desc;
2144                 }
2145                 prefetch(r);
2146
2147                 if (flags & RSPD_CTRL_MASK) {
2148                         sleeping |= flags & RSPD_GTS_MASK;
2149                         handle_rsp_cntrl_info(qs, flags);
2150                 }
2151
2152                 q->pure_rsps++;
2153                 if (++q->credits >= (q->size / 4)) {
2154                         refill_rspq(adap, q, q->credits);
2155                         q->credits = 0;
2156                 }
2157         } while (is_new_response(r, q) && is_pure_response(r));
2158
2159         if (sleeping)
2160                 check_ring_db(adap, qs, sleeping);
2161
2162         smp_mb();               /* commit Tx queue .processed updates */
2163         if (unlikely(qs->txq_stopped != 0))
2164                 restart_tx(qs);
2165
2166         return is_new_response(r, q);
2167 }
2168
2169 /**
2170  *      handle_responses - decide what to do with new responses in NAPI mode
2171  *      @adap: the adapter
2172  *      @q: the response queue
2173  *
2174  *      This is used by the NAPI interrupt handlers to decide what to do with
2175  *      new SGE responses.  If there are no new responses it returns -1.  If
2176  *      there are new responses and they are pure (i.e., non-data carrying)
2177  *      it handles them straight in hard interrupt context as they are very
2178  *      cheap and don't deliver any packets.  Finally, if there are any data
2179  *      signaling responses it schedules the NAPI handler.  Returns 1 if it
2180  *      schedules NAPI, 0 if all new responses were pure.
2181  *
2182  *      The caller must ascertain NAPI is not already running.
2183  */
2184 static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
2185 {
2186         struct sge_qset *qs = rspq_to_qset(q);
2187         struct rsp_desc *r = &q->desc[q->cidx];
2188
2189         if (!is_new_response(r, q))
2190                 return -1;
2191         if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
2192                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2193                              V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
2194                 return 0;
2195         }
2196         if (likely(__netif_rx_schedule_prep(qs->netdev)))
2197                 __netif_rx_schedule(qs->netdev);
2198         return 1;
2199 }
2200
2201 /*
2202  * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
2203  * (i.e., response queue serviced in hard interrupt).
2204  */
2205 irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
2206 {
2207         struct sge_qset *qs = cookie;
2208         struct adapter *adap = qs->netdev->priv;
2209         struct sge_rspq *q = &qs->rspq;
2210
2211         spin_lock(&q->lock);
2212         if (process_responses(adap, qs, -1) == 0)
2213                 q->unhandled_irqs++;
2214         t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2215                      V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2216         spin_unlock(&q->lock);
2217         return IRQ_HANDLED;
2218 }
2219
2220 /*
2221  * The MSI-X interrupt handler for an SGE response queue for the NAPI case
2222  * (i.e., response queue serviced by NAPI polling).
2223  */
2224 irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
2225 {
2226         struct sge_qset *qs = cookie;
2227         struct adapter *adap = qs->netdev->priv;
2228         struct sge_rspq *q = &qs->rspq;
2229
2230         spin_lock(&q->lock);
2231
2232         if (handle_responses(adap, q) < 0)
2233                 q->unhandled_irqs++;
2234         spin_unlock(&q->lock);
2235         return IRQ_HANDLED;
2236 }
2237
2238 /*
2239  * The non-NAPI MSI interrupt handler.  This needs to handle data events from
2240  * SGE response queues as well as error and other async events as they all use
2241  * the same MSI vector.  We use one SGE response queue per port in this mode
2242  * and protect all response queues with queue 0's lock.
2243  */
2244 static irqreturn_t t3_intr_msi(int irq, void *cookie)
2245 {
2246         int new_packets = 0;
2247         struct adapter *adap = cookie;
2248         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2249
2250         spin_lock(&q->lock);
2251
2252         if (process_responses(adap, &adap->sge.qs[0], -1)) {
2253                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2254                              V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2255                 new_packets = 1;
2256         }
2257
2258         if (adap->params.nports == 2 &&
2259             process_responses(adap, &adap->sge.qs[1], -1)) {
2260                 struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2261
2262                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
2263                              V_NEWTIMER(q1->next_holdoff) |
2264                              V_NEWINDEX(q1->cidx));
2265                 new_packets = 1;
2266         }
2267
2268         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2269                 q->unhandled_irqs++;
2270
2271         spin_unlock(&q->lock);
2272         return IRQ_HANDLED;
2273 }
2274
2275 static int rspq_check_napi(struct net_device *dev, struct sge_rspq *q)
2276 {
2277         if (!napi_is_scheduled(dev) && is_new_response(&q->desc[q->cidx], q)) {
2278                 if (likely(__netif_rx_schedule_prep(dev)))
2279                         __netif_rx_schedule(dev);
2280                 return 1;
2281         }
2282         return 0;
2283 }
2284
2285 /*
2286  * The MSI interrupt handler for the NAPI case (i.e., response queues serviced
2287  * by NAPI polling).  Handles data events from SGE response queues as well as
2288  * error and other async events as they all use the same MSI vector.  We use
2289  * one SGE response queue per port in this mode and protect all response
2290  * queues with queue 0's lock.
2291  */
2292 irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
2293 {
2294         int new_packets;
2295         struct adapter *adap = cookie;
2296         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2297
2298         spin_lock(&q->lock);
2299
2300         new_packets = rspq_check_napi(adap->sge.qs[0].netdev, q);
2301         if (adap->params.nports == 2)
2302                 new_packets += rspq_check_napi(adap->sge.qs[1].netdev,
2303                                                &adap->sge.qs[1].rspq);
2304         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2305                 q->unhandled_irqs++;
2306
2307         spin_unlock(&q->lock);
2308         return IRQ_HANDLED;
2309 }
2310
2311 /*
2312  * A helper function that processes responses and issues GTS.
2313  */
2314 static inline int process_responses_gts(struct adapter *adap,
2315                                         struct sge_rspq *rq)
2316 {
2317         int work;
2318
2319         work = process_responses(adap, rspq_to_qset(rq), -1);
2320         t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
2321                      V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
2322         return work;
2323 }
2324
2325 /*
2326  * The legacy INTx interrupt handler.  This needs to handle data events from
2327  * SGE response queues as well as error and other async events as they all use
2328  * the same interrupt pin.  We use one SGE response queue per port in this mode
2329  * and protect all response queues with queue 0's lock.
2330  */
2331 static irqreturn_t t3_intr(int irq, void *cookie)
2332 {
2333         int work_done, w0, w1;
2334         struct adapter *adap = cookie;
2335         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2336         struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2337
2338         spin_lock(&q0->lock);
2339
2340         w0 = is_new_response(&q0->desc[q0->cidx], q0);
2341         w1 = adap->params.nports == 2 &&
2342             is_new_response(&q1->desc[q1->cidx], q1);
2343
2344         if (likely(w0 | w1)) {
2345                 t3_write_reg(adap, A_PL_CLI, 0);
2346                 t3_read_reg(adap, A_PL_CLI);    /* flush */
2347
2348                 if (likely(w0))
2349                         process_responses_gts(adap, q0);
2350
2351                 if (w1)
2352                         process_responses_gts(adap, q1);
2353
2354                 work_done = w0 | w1;
2355         } else
2356                 work_done = t3_slow_intr_handler(adap);
2357
2358         spin_unlock(&q0->lock);
2359         return IRQ_RETVAL(work_done != 0);
2360 }
2361
2362 /*
2363  * Interrupt handler for legacy INTx interrupts for T3B-based cards.
2364  * Handles data events from SGE response queues as well as error and other
2365  * async events as they all use the same interrupt pin.  We use one SGE
2366  * response queue per port in this mode and protect all response queues with
2367  * queue 0's lock.
2368  */
2369 static irqreturn_t t3b_intr(int irq, void *cookie)
2370 {
2371         u32 map;
2372         struct adapter *adap = cookie;
2373         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2374
2375         t3_write_reg(adap, A_PL_CLI, 0);
2376         map = t3_read_reg(adap, A_SG_DATA_INTR);
2377
2378         if (unlikely(!map))     /* shared interrupt, most likely */
2379                 return IRQ_NONE;
2380
2381         spin_lock(&q0->lock);
2382
2383         if (unlikely(map & F_ERRINTR))
2384                 t3_slow_intr_handler(adap);
2385
2386         if (likely(map & 1))
2387                 process_responses_gts(adap, q0);
2388
2389         if (map & 2)
2390                 process_responses_gts(adap, &adap->sge.qs[1].rspq);
2391
2392         spin_unlock(&q0->lock);
2393         return IRQ_HANDLED;
2394 }
2395
2396 /*
2397  * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
2398  * Handles data events from SGE response queues as well as error and other
2399  * async events as they all use the same interrupt pin.  We use one SGE
2400  * response queue per port in this mode and protect all response queues with
2401  * queue 0's lock.
2402  */
2403 static irqreturn_t t3b_intr_napi(int irq, void *cookie)
2404 {
2405         u32 map;
2406         struct net_device *dev;
2407         struct adapter *adap = cookie;
2408         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2409
2410         t3_write_reg(adap, A_PL_CLI, 0);
2411         map = t3_read_reg(adap, A_SG_DATA_INTR);
2412
2413         if (unlikely(!map))     /* shared interrupt, most likely */
2414                 return IRQ_NONE;
2415
2416         spin_lock(&q0->lock);
2417
2418         if (unlikely(map & F_ERRINTR))
2419                 t3_slow_intr_handler(adap);
2420
2421         if (likely(map & 1)) {
2422                 dev = adap->sge.qs[0].netdev;
2423
2424                 if (likely(__netif_rx_schedule_prep(dev)))
2425                         __netif_rx_schedule(dev);
2426         }
2427         if (map & 2) {
2428                 dev = adap->sge.qs[1].netdev;
2429
2430                 if (likely(__netif_rx_schedule_prep(dev)))
2431                         __netif_rx_schedule(dev);
2432         }
2433
2434         spin_unlock(&q0->lock);
2435         return IRQ_HANDLED;
2436 }
2437
2438 /**
2439  *      t3_intr_handler - select the top-level interrupt handler
2440  *      @adap: the adapter
2441  *      @polling: whether using NAPI to service response queues
2442  *
2443  *      Selects the top-level interrupt handler based on the type of interrupts
2444  *      (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
2445  *      response queues.
2446  */
2447 intr_handler_t t3_intr_handler(struct adapter *adap, int polling)
2448 {
2449         if (adap->flags & USING_MSIX)
2450                 return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
2451         if (adap->flags & USING_MSI)
2452                 return polling ? t3_intr_msi_napi : t3_intr_msi;
2453         if (adap->params.rev > 0)
2454                 return polling ? t3b_intr_napi : t3b_intr;
2455         return t3_intr;
2456 }
2457
2458 /**
2459  *      t3_sge_err_intr_handler - SGE async event interrupt handler
2460  *      @adapter: the adapter
2461  *
2462  *      Interrupt handler for SGE asynchronous (non-data) events.
2463  */
2464 void t3_sge_err_intr_handler(struct adapter *adapter)
2465 {
2466         unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE);
2467
2468         if (status & F_RSPQCREDITOVERFOW)
2469                 CH_ALERT(adapter, "SGE response queue credit overflow\n");
2470
2471         if (status & F_RSPQDISABLED) {
2472                 v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
2473
2474                 CH_ALERT(adapter,
2475                          "packet delivered to disabled response queue "
2476                          "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
2477         }
2478
2479         t3_write_reg(adapter, A_SG_INT_CAUSE, status);
2480         if (status & (F_RSPQCREDITOVERFOW | F_RSPQDISABLED))
2481                 t3_fatal_err(adapter);
2482 }
2483
2484 /**
2485  *      sge_timer_cb - perform periodic maintenance of an SGE qset
2486  *      @data: the SGE queue set to maintain
2487  *
2488  *      Runs periodically from a timer to perform maintenance of an SGE queue
2489  *      set.  It performs two tasks:
2490  *
2491  *      a) Cleans up any completed Tx descriptors that may still be pending.
2492  *      Normal descriptor cleanup happens when new packets are added to a Tx
2493  *      queue so this timer is relatively infrequent and does any cleanup only
2494  *      if the Tx queue has not seen any new packets in a while.  We make a
2495  *      best effort attempt to reclaim descriptors, in that we don't wait
2496  *      around if we cannot get a queue's lock (which most likely is because
2497  *      someone else is queueing new packets and so will also handle the clean
2498  *      up).  Since control queues use immediate data exclusively we don't
2499  *      bother cleaning them up here.
2500  *
2501  *      b) Replenishes Rx queues that have run out due to memory shortage.
2502  *      Normally new Rx buffers are added when existing ones are consumed but
2503  *      when out of memory a queue can become empty.  We try to add only a few
2504  *      buffers here, the queue will be replenished fully as these new buffers
2505  *      are used up if memory shortage has subsided.
2506  */
2507 static void sge_timer_cb(unsigned long data)
2508 {
2509         spinlock_t *lock;
2510         struct sge_qset *qs = (struct sge_qset *)data;
2511         struct adapter *adap = qs->netdev->priv;
2512
2513         if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
2514                 reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]);
2515                 spin_unlock(&qs->txq[TXQ_ETH].lock);
2516         }
2517         if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
2518                 reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]);
2519                 spin_unlock(&qs->txq[TXQ_OFLD].lock);
2520         }
2521         lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock :
2522             &adap->sge.qs[0].rspq.lock;
2523         if (spin_trylock_irq(lock)) {
2524                 if (!napi_is_scheduled(qs->netdev)) {
2525                         u32 status = t3_read_reg(adap, A_SG_RSPQ_FL_STATUS);
2526
2527                         if (qs->fl[0].credits < qs->fl[0].size)
2528                                 __refill_fl(adap, &qs->fl[0]);
2529                         if (qs->fl[1].credits < qs->fl[1].size)
2530                                 __refill_fl(adap, &qs->fl[1]);
2531
2532                         if (status & (1 << qs->rspq.cntxt_id)) {
2533                                 qs->rspq.starved++;
2534                                 if (qs->rspq.credits) {
2535                                         refill_rspq(adap, &qs->rspq, 1);
2536                                         qs->rspq.credits--;
2537                                         qs->rspq.restarted++;
2538                                         t3_write_reg(adap, A_SG_RSPQ_FL_STATUS,
2539                                                      1 << qs->rspq.cntxt_id);
2540                                 }
2541                         }
2542                 }
2543                 spin_unlock_irq(lock);
2544         }
2545         mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
2546 }
2547
2548 /**
2549  *      t3_update_qset_coalesce - update coalescing settings for a queue set
2550  *      @qs: the SGE queue set
2551  *      @p: new queue set parameters
2552  *
2553  *      Update the coalescing settings for an SGE queue set.  Nothing is done
2554  *      if the queue set is not initialized yet.
2555  */
2556 void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
2557 {
2558         if (!qs->netdev)
2559                 return;
2560
2561         qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
2562         qs->rspq.polling = p->polling;
2563         qs->netdev->poll = p->polling ? napi_rx_handler : ofld_poll;
2564 }
2565
2566 /**
2567  *      t3_sge_alloc_qset - initialize an SGE queue set
2568  *      @adapter: the adapter
2569  *      @id: the queue set id
2570  *      @nports: how many Ethernet ports will be using this queue set
2571  *      @irq_vec_idx: the IRQ vector index for response queue interrupts
2572  *      @p: configuration parameters for this queue set
2573  *      @ntxq: number of Tx queues for the queue set
2574  *      @netdev: net device associated with this queue set
2575  *
2576  *      Allocate resources and initialize an SGE queue set.  A queue set
2577  *      comprises a response queue, two Rx free-buffer queues, and up to 3
2578  *      Tx queues.  The Tx queues are assigned roles in the order Ethernet
2579  *      queue, offload queue, and control queue.
2580  */
2581 int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
2582                       int irq_vec_idx, const struct qset_params *p,
2583                       int ntxq, struct net_device *netdev)
2584 {
2585         int i, ret = -ENOMEM;
2586         struct sge_qset *q = &adapter->sge.qs[id];
2587
2588         init_qset_cntxt(q, id);
2589         init_timer(&q->tx_reclaim_timer);
2590         q->tx_reclaim_timer.data = (unsigned long)q;
2591         q->tx_reclaim_timer.function = sge_timer_cb;
2592
2593         q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
2594                                    sizeof(struct rx_desc),
2595                                    sizeof(struct rx_sw_desc),
2596                                    &q->fl[0].phys_addr, &q->fl[0].sdesc);
2597         if (!q->fl[0].desc)
2598                 goto err;
2599
2600         q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
2601                                    sizeof(struct rx_desc),
2602                                    sizeof(struct rx_sw_desc),
2603                                    &q->fl[1].phys_addr, &q->fl[1].sdesc);
2604         if (!q->fl[1].desc)
2605                 goto err;
2606
2607         q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
2608                                   sizeof(struct rsp_desc), 0,
2609                                   &q->rspq.phys_addr, NULL);
2610         if (!q->rspq.desc)
2611                 goto err;
2612
2613         for (i = 0; i < ntxq; ++i) {
2614                 /*
2615                  * The control queue always uses immediate data so does not
2616                  * need to keep track of any sk_buffs.
2617                  */
2618                 size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
2619
2620                 q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
2621                                             sizeof(struct tx_desc), sz,
2622                                             &q->txq[i].phys_addr,
2623                                             &q->txq[i].sdesc);
2624                 if (!q->txq[i].desc)
2625                         goto err;
2626
2627                 q->txq[i].gen = 1;
2628                 q->txq[i].size = p->txq_size[i];
2629                 spin_lock_init(&q->txq[i].lock);
2630                 skb_queue_head_init(&q->txq[i].sendq);
2631         }
2632
2633         tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
2634                      (unsigned long)q);
2635         tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
2636                      (unsigned long)q);
2637
2638         q->fl[0].gen = q->fl[1].gen = 1;
2639         q->fl[0].size = p->fl_size;
2640         q->fl[1].size = p->jumbo_size;
2641
2642         q->rspq.gen = 1;
2643         q->rspq.size = p->rspq_size;
2644         spin_lock_init(&q->rspq.lock);
2645
2646         q->txq[TXQ_ETH].stop_thres = nports *
2647             flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
2648
2649 #if FL0_PG_CHUNK_SIZE > 0
2650         q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
2651 #else
2652         q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
2653 #endif
2654         q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
2655         q->fl[1].buf_size = is_offload(adapter) ?
2656                 (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
2657                 MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
2658
2659         spin_lock(&adapter->sge.reg_lock);
2660
2661         /* FL threshold comparison uses < */
2662         ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
2663                                    q->rspq.phys_addr, q->rspq.size,
2664                                    q->fl[0].buf_size, 1, 0);
2665         if (ret)
2666                 goto err_unlock;
2667
2668         for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
2669                 ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
2670                                           q->fl[i].phys_addr, q->fl[i].size,
2671                                           q->fl[i].buf_size, p->cong_thres, 1,
2672                                           0);
2673                 if (ret)
2674                         goto err_unlock;
2675         }
2676
2677         ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
2678                                  SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
2679                                  q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
2680                                  1, 0);
2681         if (ret)
2682                 goto err_unlock;
2683
2684         if (ntxq > 1) {
2685                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
2686                                          USE_GTS, SGE_CNTXT_OFLD, id,
2687                                          q->txq[TXQ_OFLD].phys_addr,
2688                                          q->txq[TXQ_OFLD].size, 0, 1, 0);
2689                 if (ret)
2690                         goto err_unlock;
2691         }
2692
2693         if (ntxq > 2) {
2694                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
2695                                          SGE_CNTXT_CTRL, id,
2696                                          q->txq[TXQ_CTRL].phys_addr,
2697                                          q->txq[TXQ_CTRL].size,
2698                                          q->txq[TXQ_CTRL].token, 1, 0);
2699                 if (ret)
2700                         goto err_unlock;
2701         }
2702
2703         spin_unlock(&adapter->sge.reg_lock);
2704         q->netdev = netdev;
2705         t3_update_qset_coalesce(q, p);
2706
2707         /*
2708          * We use atalk_ptr as a backpointer to a qset.  In case a device is
2709          * associated with multiple queue sets only the first one sets
2710          * atalk_ptr.
2711          */
2712         if (netdev->atalk_ptr == NULL)
2713                 netdev->atalk_ptr = q;
2714
2715         refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
2716         refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
2717         refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
2718
2719         t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
2720                      V_NEWTIMER(q->rspq.holdoff_tmr));
2721
2722         mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
2723         return 0;
2724
2725       err_unlock:
2726         spin_unlock(&adapter->sge.reg_lock);
2727       err:
2728         t3_free_qset(adapter, q);
2729         return ret;
2730 }
2731
2732 /**
2733  *      t3_free_sge_resources - free SGE resources
2734  *      @adap: the adapter
2735  *
2736  *      Frees resources used by the SGE queue sets.
2737  */
2738 void t3_free_sge_resources(struct adapter *adap)
2739 {
2740         int i;
2741
2742         for (i = 0; i < SGE_QSETS; ++i)
2743                 t3_free_qset(adap, &adap->sge.qs[i]);
2744 }
2745
2746 /**
2747  *      t3_sge_start - enable SGE
2748  *      @adap: the adapter
2749  *
2750  *      Enables the SGE for DMAs.  This is the last step in starting packet
2751  *      transfers.
2752  */
2753 void t3_sge_start(struct adapter *adap)
2754 {
2755         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
2756 }
2757
2758 /**
2759  *      t3_sge_stop - disable SGE operation
2760  *      @adap: the adapter
2761  *
2762  *      Disables the DMA engine.  This can be called in emeregencies (e.g.,
2763  *      from error interrupts) or from normal process context.  In the latter
2764  *      case it also disables any pending queue restart tasklets.  Note that
2765  *      if it is called in interrupt context it cannot disable the restart
2766  *      tasklets as it cannot wait, however the tasklets will have no effect
2767  *      since the doorbells are disabled and the driver will call this again
2768  *      later from process context, at which time the tasklets will be stopped
2769  *      if they are still running.
2770  */
2771 void t3_sge_stop(struct adapter *adap)
2772 {
2773         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
2774         if (!in_interrupt()) {
2775                 int i;
2776
2777                 for (i = 0; i < SGE_QSETS; ++i) {
2778                         struct sge_qset *qs = &adap->sge.qs[i];
2779
2780                         tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
2781                         tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
2782                 }
2783         }
2784 }
2785
2786 /**
2787  *      t3_sge_init - initialize SGE
2788  *      @adap: the adapter
2789  *      @p: the SGE parameters
2790  *
2791  *      Performs SGE initialization needed every time after a chip reset.
2792  *      We do not initialize any of the queue sets here, instead the driver
2793  *      top-level must request those individually.  We also do not enable DMA
2794  *      here, that should be done after the queues have been set up.
2795  */
2796 void t3_sge_init(struct adapter *adap, struct sge_params *p)
2797 {
2798         unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
2799
2800         ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
2801             F_CQCRDTCTRL |
2802             V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
2803             V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
2804 #if SGE_NUM_GENBITS == 1
2805         ctrl |= F_EGRGENCTRL;
2806 #endif
2807         if (adap->params.rev > 0) {
2808                 if (!(adap->flags & (USING_MSIX | USING_MSI)))
2809                         ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
2810                 ctrl |= F_CQCRDTCTRL | F_AVOIDCQOVFL;
2811         }
2812         t3_write_reg(adap, A_SG_CONTROL, ctrl);
2813         t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
2814                      V_LORCQDRBTHRSH(512));
2815         t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
2816         t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
2817                      V_TIMEOUT(200 * core_ticks_per_usec(adap)));
2818         t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH, 1000);
2819         t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
2820         t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
2821         t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
2822         t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
2823         t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
2824 }
2825
2826 /**
2827  *      t3_sge_prep - one-time SGE initialization
2828  *      @adap: the associated adapter
2829  *      @p: SGE parameters
2830  *
2831  *      Performs one-time initialization of SGE SW state.  Includes determining
2832  *      defaults for the assorted SGE parameters, which admins can change until
2833  *      they are used to initialize the SGE.
2834  */
2835 void __devinit t3_sge_prep(struct adapter *adap, struct sge_params *p)
2836 {
2837         int i;
2838
2839         p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
2840             SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
2841
2842         for (i = 0; i < SGE_QSETS; ++i) {
2843                 struct qset_params *q = p->qset + i;
2844
2845                 q->polling = adap->params.rev > 0;
2846                 q->coalesce_usecs = 5;
2847                 q->rspq_size = 1024;
2848                 q->fl_size = 1024;
2849                 q->jumbo_size = 512;
2850                 q->txq_size[TXQ_ETH] = 1024;
2851                 q->txq_size[TXQ_OFLD] = 1024;
2852                 q->txq_size[TXQ_CTRL] = 256;
2853                 q->cong_thres = 0;
2854         }
2855
2856         spin_lock_init(&adap->sge.reg_lock);
2857 }
2858
2859 /**
2860  *      t3_get_desc - dump an SGE descriptor for debugging purposes
2861  *      @qs: the queue set
2862  *      @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
2863  *      @idx: the descriptor index in the queue
2864  *      @data: where to dump the descriptor contents
2865  *
2866  *      Dumps the contents of a HW descriptor of an SGE queue.  Returns the
2867  *      size of the descriptor.
2868  */
2869 int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
2870                 unsigned char *data)
2871 {
2872         if (qnum >= 6)
2873                 return -EINVAL;
2874
2875         if (qnum < 3) {
2876                 if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
2877                         return -EINVAL;
2878                 memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
2879                 return sizeof(struct tx_desc);
2880         }
2881
2882         if (qnum == 3) {
2883                 if (!qs->rspq.desc || idx >= qs->rspq.size)
2884                         return -EINVAL;
2885                 memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
2886                 return sizeof(struct rsp_desc);
2887         }
2888
2889         qnum -= 4;
2890         if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
2891                 return -EINVAL;
2892         memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
2893         return sizeof(struct rx_desc);
2894 }