cxgb3: fix skb truesize in jumbo mode
[safe/jmp/linux-2.6] / drivers / net / cxgb3 / sge.c
1 /*
2  * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  */
32 #include <linux/skbuff.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/if_vlan.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/dma-mapping.h>
39 #include <net/arp.h>
40 #include "common.h"
41 #include "regs.h"
42 #include "sge_defs.h"
43 #include "t3_cpl.h"
44 #include "firmware_exports.h"
45
46 #define USE_GTS 0
47
48 #define SGE_RX_SM_BUF_SIZE 1536
49
50 #define SGE_RX_COPY_THRES  256
51 #define SGE_RX_PULL_LEN    128
52
53 /*
54  * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
55  * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
56  * directly.
57  */
58 #define FL0_PG_CHUNK_SIZE  2048
59 #define FL0_PG_ORDER 0
60 #define FL1_PG_CHUNK_SIZE (PAGE_SIZE > 8192 ? 16384 : 8192)
61 #define FL1_PG_ORDER (PAGE_SIZE > 8192 ? 0 : 1)
62
63 #define SGE_RX_DROP_THRES 16
64
65 /*
66  * Max number of Rx buffers we replenish at a time.
67  */
68 #define MAX_RX_REFILL 16U
69 /*
70  * Period of the Tx buffer reclaim timer.  This timer does not need to run
71  * frequently as Tx buffers are usually reclaimed by new Tx packets.
72  */
73 #define TX_RECLAIM_PERIOD (HZ / 4)
74
75 /* WR size in bytes */
76 #define WR_LEN (WR_FLITS * 8)
77
78 /*
79  * Types of Tx queues in each queue set.  Order here matters, do not change.
80  */
81 enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
82
83 /* Values for sge_txq.flags */
84 enum {
85         TXQ_RUNNING = 1 << 0,   /* fetch engine is running */
86         TXQ_LAST_PKT_DB = 1 << 1,       /* last packet rang the doorbell */
87 };
88
89 struct tx_desc {
90         __be64 flit[TX_DESC_FLITS];
91 };
92
93 struct rx_desc {
94         __be32 addr_lo;
95         __be32 len_gen;
96         __be32 gen2;
97         __be32 addr_hi;
98 };
99
100 struct tx_sw_desc {             /* SW state per Tx descriptor */
101         struct sk_buff *skb;
102         u8 eop;       /* set if last descriptor for packet */
103         u8 addr_idx;  /* buffer index of first SGL entry in descriptor */
104         u8 fragidx;   /* first page fragment associated with descriptor */
105         s8 sflit;     /* start flit of first SGL entry in descriptor */
106 };
107
108 struct rx_sw_desc {                /* SW state per Rx descriptor */
109         union {
110                 struct sk_buff *skb;
111                 struct fl_pg_chunk pg_chunk;
112         };
113         DECLARE_PCI_UNMAP_ADDR(dma_addr);
114 };
115
116 struct rsp_desc {               /* response queue descriptor */
117         struct rss_header rss_hdr;
118         __be32 flags;
119         __be32 len_cq;
120         u8 imm_data[47];
121         u8 intr_gen;
122 };
123
124 /*
125  * Holds unmapping information for Tx packets that need deferred unmapping.
126  * This structure lives at skb->head and must be allocated by callers.
127  */
128 struct deferred_unmap_info {
129         struct pci_dev *pdev;
130         dma_addr_t addr[MAX_SKB_FRAGS + 1];
131 };
132
133 /*
134  * Maps a number of flits to the number of Tx descriptors that can hold them.
135  * The formula is
136  *
137  * desc = 1 + (flits - 2) / (WR_FLITS - 1).
138  *
139  * HW allows up to 4 descriptors to be combined into a WR.
140  */
141 static u8 flit_desc_map[] = {
142         0,
143 #if SGE_NUM_GENBITS == 1
144         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
145         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
146         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
147         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
148 #elif SGE_NUM_GENBITS == 2
149         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
150         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
151         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
152         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
153 #else
154 # error "SGE_NUM_GENBITS must be 1 or 2"
155 #endif
156 };
157
158 static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
159 {
160         return container_of(q, struct sge_qset, fl[qidx]);
161 }
162
163 static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
164 {
165         return container_of(q, struct sge_qset, rspq);
166 }
167
168 static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
169 {
170         return container_of(q, struct sge_qset, txq[qidx]);
171 }
172
173 /**
174  *      refill_rspq - replenish an SGE response queue
175  *      @adapter: the adapter
176  *      @q: the response queue to replenish
177  *      @credits: how many new responses to make available
178  *
179  *      Replenishes a response queue by making the supplied number of responses
180  *      available to HW.
181  */
182 static inline void refill_rspq(struct adapter *adapter,
183                                const struct sge_rspq *q, unsigned int credits)
184 {
185         rmb();
186         t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
187                      V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
188 }
189
190 /**
191  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
192  *
193  *      Returns true if the platfrom needs sk_buff unmapping.  The compiler
194  *      optimizes away unecessary code if this returns true.
195  */
196 static inline int need_skb_unmap(void)
197 {
198         /*
199          * This structure is used to tell if the platfrom needs buffer
200          * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
201          */
202         struct dummy {
203                 DECLARE_PCI_UNMAP_ADDR(addr);
204         };
205
206         return sizeof(struct dummy) != 0;
207 }
208
209 /**
210  *      unmap_skb - unmap a packet main body and its page fragments
211  *      @skb: the packet
212  *      @q: the Tx queue containing Tx descriptors for the packet
213  *      @cidx: index of Tx descriptor
214  *      @pdev: the PCI device
215  *
216  *      Unmap the main body of an sk_buff and its page fragments, if any.
217  *      Because of the fairly complicated structure of our SGLs and the desire
218  *      to conserve space for metadata, the information necessary to unmap an
219  *      sk_buff is spread across the sk_buff itself (buffer lengths), the HW Tx
220  *      descriptors (the physical addresses of the various data buffers), and
221  *      the SW descriptor state (assorted indices).  The send functions
222  *      initialize the indices for the first packet descriptor so we can unmap
223  *      the buffers held in the first Tx descriptor here, and we have enough
224  *      information at this point to set the state for the next Tx descriptor.
225  *
226  *      Note that it is possible to clean up the first descriptor of a packet
227  *      before the send routines have written the next descriptors, but this
228  *      race does not cause any problem.  We just end up writing the unmapping
229  *      info for the descriptor first.
230  */
231 static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
232                              unsigned int cidx, struct pci_dev *pdev)
233 {
234         const struct sg_ent *sgp;
235         struct tx_sw_desc *d = &q->sdesc[cidx];
236         int nfrags, frag_idx, curflit, j = d->addr_idx;
237
238         sgp = (struct sg_ent *)&q->desc[cidx].flit[d->sflit];
239         frag_idx = d->fragidx;
240
241         if (frag_idx == 0 && skb_headlen(skb)) {
242                 pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]),
243                                  skb_headlen(skb), PCI_DMA_TODEVICE);
244                 j = 1;
245         }
246
247         curflit = d->sflit + 1 + j;
248         nfrags = skb_shinfo(skb)->nr_frags;
249
250         while (frag_idx < nfrags && curflit < WR_FLITS) {
251                 pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
252                                skb_shinfo(skb)->frags[frag_idx].size,
253                                PCI_DMA_TODEVICE);
254                 j ^= 1;
255                 if (j == 0) {
256                         sgp++;
257                         curflit++;
258                 }
259                 curflit++;
260                 frag_idx++;
261         }
262
263         if (frag_idx < nfrags) {   /* SGL continues into next Tx descriptor */
264                 d = cidx + 1 == q->size ? q->sdesc : d + 1;
265                 d->fragidx = frag_idx;
266                 d->addr_idx = j;
267                 d->sflit = curflit - WR_FLITS - j; /* sflit can be -1 */
268         }
269 }
270
271 /**
272  *      free_tx_desc - reclaims Tx descriptors and their buffers
273  *      @adapter: the adapter
274  *      @q: the Tx queue to reclaim descriptors from
275  *      @n: the number of descriptors to reclaim
276  *
277  *      Reclaims Tx descriptors from an SGE Tx queue and frees the associated
278  *      Tx buffers.  Called with the Tx queue lock held.
279  */
280 static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
281                          unsigned int n)
282 {
283         struct tx_sw_desc *d;
284         struct pci_dev *pdev = adapter->pdev;
285         unsigned int cidx = q->cidx;
286
287         const int need_unmap = need_skb_unmap() &&
288                                q->cntxt_id >= FW_TUNNEL_SGEEC_START;
289
290         d = &q->sdesc[cidx];
291         while (n--) {
292                 if (d->skb) {   /* an SGL is present */
293                         if (need_unmap)
294                                 unmap_skb(d->skb, q, cidx, pdev);
295                         if (d->eop)
296                                 kfree_skb(d->skb);
297                 }
298                 ++d;
299                 if (++cidx == q->size) {
300                         cidx = 0;
301                         d = q->sdesc;
302                 }
303         }
304         q->cidx = cidx;
305 }
306
307 /**
308  *      reclaim_completed_tx - reclaims completed Tx descriptors
309  *      @adapter: the adapter
310  *      @q: the Tx queue to reclaim completed descriptors from
311  *
312  *      Reclaims Tx descriptors that the SGE has indicated it has processed,
313  *      and frees the associated buffers if possible.  Called with the Tx
314  *      queue's lock held.
315  */
316 static inline void reclaim_completed_tx(struct adapter *adapter,
317                                         struct sge_txq *q)
318 {
319         unsigned int reclaim = q->processed - q->cleaned;
320
321         if (reclaim) {
322                 free_tx_desc(adapter, q, reclaim);
323                 q->cleaned += reclaim;
324                 q->in_use -= reclaim;
325         }
326 }
327
328 /**
329  *      should_restart_tx - are there enough resources to restart a Tx queue?
330  *      @q: the Tx queue
331  *
332  *      Checks if there are enough descriptors to restart a suspended Tx queue.
333  */
334 static inline int should_restart_tx(const struct sge_txq *q)
335 {
336         unsigned int r = q->processed - q->cleaned;
337
338         return q->in_use - r < (q->size >> 1);
339 }
340
341 static void clear_rx_desc(const struct sge_fl *q, struct rx_sw_desc *d)
342 {
343         if (q->use_pages) {
344                 if (d->pg_chunk.page)
345                         put_page(d->pg_chunk.page);
346                 d->pg_chunk.page = NULL;
347         } else {
348                 kfree_skb(d->skb);
349                 d->skb = NULL;
350         }
351 }
352
353 /**
354  *      free_rx_bufs - free the Rx buffers on an SGE free list
355  *      @pdev: the PCI device associated with the adapter
356  *      @rxq: the SGE free list to clean up
357  *
358  *      Release the buffers on an SGE free-buffer Rx queue.  HW fetching from
359  *      this queue should be stopped before calling this function.
360  */
361 static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
362 {
363         unsigned int cidx = q->cidx;
364
365         while (q->credits--) {
366                 struct rx_sw_desc *d = &q->sdesc[cidx];
367
368                 pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
369                                  q->buf_size, PCI_DMA_FROMDEVICE);
370                 clear_rx_desc(q, d);
371                 if (++cidx == q->size)
372                         cidx = 0;
373         }
374
375         if (q->pg_chunk.page) {
376                 __free_pages(q->pg_chunk.page, q->order);
377                 q->pg_chunk.page = NULL;
378         }
379 }
380
381 /**
382  *      add_one_rx_buf - add a packet buffer to a free-buffer list
383  *      @va:  buffer start VA
384  *      @len: the buffer length
385  *      @d: the HW Rx descriptor to write
386  *      @sd: the SW Rx descriptor to write
387  *      @gen: the generation bit value
388  *      @pdev: the PCI device associated with the adapter
389  *
390  *      Add a buffer of the given length to the supplied HW and SW Rx
391  *      descriptors.
392  */
393 static inline int add_one_rx_buf(void *va, unsigned int len,
394                                  struct rx_desc *d, struct rx_sw_desc *sd,
395                                  unsigned int gen, struct pci_dev *pdev)
396 {
397         dma_addr_t mapping;
398
399         mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
400         if (unlikely(pci_dma_mapping_error(pdev, mapping)))
401                 return -ENOMEM;
402
403         pci_unmap_addr_set(sd, dma_addr, mapping);
404
405         d->addr_lo = cpu_to_be32(mapping);
406         d->addr_hi = cpu_to_be32((u64) mapping >> 32);
407         wmb();
408         d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
409         d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
410         return 0;
411 }
412
413 static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp,
414                           unsigned int order)
415 {
416         if (!q->pg_chunk.page) {
417                 q->pg_chunk.page = alloc_pages(gfp, order);
418                 if (unlikely(!q->pg_chunk.page))
419                         return -ENOMEM;
420                 q->pg_chunk.va = page_address(q->pg_chunk.page);
421                 q->pg_chunk.offset = 0;
422         }
423         sd->pg_chunk = q->pg_chunk;
424
425         q->pg_chunk.offset += q->buf_size;
426         if (q->pg_chunk.offset == (PAGE_SIZE << order))
427                 q->pg_chunk.page = NULL;
428         else {
429                 q->pg_chunk.va += q->buf_size;
430                 get_page(q->pg_chunk.page);
431         }
432         return 0;
433 }
434
435 static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
436 {
437         if (q->pend_cred >= q->credits / 4) {
438                 q->pend_cred = 0;
439                 t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
440         }
441 }
442
443 /**
444  *      refill_fl - refill an SGE free-buffer list
445  *      @adapter: the adapter
446  *      @q: the free-list to refill
447  *      @n: the number of new buffers to allocate
448  *      @gfp: the gfp flags for allocating new buffers
449  *
450  *      (Re)populate an SGE free-buffer list with up to @n new packet buffers,
451  *      allocated with the supplied gfp flags.  The caller must assure that
452  *      @n does not exceed the queue's capacity.
453  */
454 static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
455 {
456         void *buf_start;
457         struct rx_sw_desc *sd = &q->sdesc[q->pidx];
458         struct rx_desc *d = &q->desc[q->pidx];
459         unsigned int count = 0;
460
461         while (n--) {
462                 int err;
463
464                 if (q->use_pages) {
465                         if (unlikely(alloc_pg_chunk(q, sd, gfp, q->order))) {
466 nomem:                          q->alloc_failed++;
467                                 break;
468                         }
469                         buf_start = sd->pg_chunk.va;
470                 } else {
471                         struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
472
473                         if (!skb)
474                                 goto nomem;
475
476                         sd->skb = skb;
477                         buf_start = skb->data;
478                 }
479
480                 err = add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
481                                      adap->pdev);
482                 if (unlikely(err)) {
483                         clear_rx_desc(q, sd);
484                         break;
485                 }
486
487                 d++;
488                 sd++;
489                 if (++q->pidx == q->size) {
490                         q->pidx = 0;
491                         q->gen ^= 1;
492                         sd = q->sdesc;
493                         d = q->desc;
494                 }
495                 count++;
496         }
497
498         q->credits += count;
499         q->pend_cred += count;
500         ring_fl_db(adap, q);
501
502         return count;
503 }
504
505 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
506 {
507         refill_fl(adap, fl, min(MAX_RX_REFILL, fl->size - fl->credits),
508                   GFP_ATOMIC | __GFP_COMP);
509 }
510
511 /**
512  *      recycle_rx_buf - recycle a receive buffer
513  *      @adapter: the adapter
514  *      @q: the SGE free list
515  *      @idx: index of buffer to recycle
516  *
517  *      Recycles the specified buffer on the given free list by adding it at
518  *      the next available slot on the list.
519  */
520 static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
521                            unsigned int idx)
522 {
523         struct rx_desc *from = &q->desc[idx];
524         struct rx_desc *to = &q->desc[q->pidx];
525
526         q->sdesc[q->pidx] = q->sdesc[idx];
527         to->addr_lo = from->addr_lo;    /* already big endian */
528         to->addr_hi = from->addr_hi;    /* likewise */
529         wmb();
530         to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
531         to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
532
533         if (++q->pidx == q->size) {
534                 q->pidx = 0;
535                 q->gen ^= 1;
536         }
537
538         q->credits++;
539         q->pend_cred++;
540         ring_fl_db(adap, q);
541 }
542
543 /**
544  *      alloc_ring - allocate resources for an SGE descriptor ring
545  *      @pdev: the PCI device
546  *      @nelem: the number of descriptors
547  *      @elem_size: the size of each descriptor
548  *      @sw_size: the size of the SW state associated with each ring element
549  *      @phys: the physical address of the allocated ring
550  *      @metadata: address of the array holding the SW state for the ring
551  *
552  *      Allocates resources for an SGE descriptor ring, such as Tx queues,
553  *      free buffer lists, or response queues.  Each SGE ring requires
554  *      space for its HW descriptors plus, optionally, space for the SW state
555  *      associated with each HW entry (the metadata).  The function returns
556  *      three values: the virtual address for the HW ring (the return value
557  *      of the function), the physical address of the HW ring, and the address
558  *      of the SW ring.
559  */
560 static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
561                         size_t sw_size, dma_addr_t * phys, void *metadata)
562 {
563         size_t len = nelem * elem_size;
564         void *s = NULL;
565         void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
566
567         if (!p)
568                 return NULL;
569         if (sw_size && metadata) {
570                 s = kcalloc(nelem, sw_size, GFP_KERNEL);
571
572                 if (!s) {
573                         dma_free_coherent(&pdev->dev, len, p, *phys);
574                         return NULL;
575                 }
576                 *(void **)metadata = s;
577         }
578         memset(p, 0, len);
579         return p;
580 }
581
582 /**
583  *      t3_reset_qset - reset a sge qset
584  *      @q: the queue set
585  *
586  *      Reset the qset structure.
587  *      the NAPI structure is preserved in the event of
588  *      the qset's reincarnation, for example during EEH recovery.
589  */
590 static void t3_reset_qset(struct sge_qset *q)
591 {
592         if (q->adap &&
593             !(q->adap->flags & NAPI_INIT)) {
594                 memset(q, 0, sizeof(*q));
595                 return;
596         }
597
598         q->adap = NULL;
599         memset(&q->rspq, 0, sizeof(q->rspq));
600         memset(q->fl, 0, sizeof(struct sge_fl) * SGE_RXQ_PER_SET);
601         memset(q->txq, 0, sizeof(struct sge_txq) * SGE_TXQ_PER_SET);
602         q->txq_stopped = 0;
603         q->tx_reclaim_timer.function = NULL; /* for t3_stop_sge_timers() */
604         q->lro_frag_tbl.nr_frags = q->lro_frag_tbl.len = 0;
605 }
606
607
608 /**
609  *      free_qset - free the resources of an SGE queue set
610  *      @adapter: the adapter owning the queue set
611  *      @q: the queue set
612  *
613  *      Release the HW and SW resources associated with an SGE queue set, such
614  *      as HW contexts, packet buffers, and descriptor rings.  Traffic to the
615  *      queue set must be quiesced prior to calling this.
616  */
617 static void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
618 {
619         int i;
620         struct pci_dev *pdev = adapter->pdev;
621
622         for (i = 0; i < SGE_RXQ_PER_SET; ++i)
623                 if (q->fl[i].desc) {
624                         spin_lock_irq(&adapter->sge.reg_lock);
625                         t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
626                         spin_unlock_irq(&adapter->sge.reg_lock);
627                         free_rx_bufs(pdev, &q->fl[i]);
628                         kfree(q->fl[i].sdesc);
629                         dma_free_coherent(&pdev->dev,
630                                           q->fl[i].size *
631                                           sizeof(struct rx_desc), q->fl[i].desc,
632                                           q->fl[i].phys_addr);
633                 }
634
635         for (i = 0; i < SGE_TXQ_PER_SET; ++i)
636                 if (q->txq[i].desc) {
637                         spin_lock_irq(&adapter->sge.reg_lock);
638                         t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
639                         spin_unlock_irq(&adapter->sge.reg_lock);
640                         if (q->txq[i].sdesc) {
641                                 free_tx_desc(adapter, &q->txq[i],
642                                              q->txq[i].in_use);
643                                 kfree(q->txq[i].sdesc);
644                         }
645                         dma_free_coherent(&pdev->dev,
646                                           q->txq[i].size *
647                                           sizeof(struct tx_desc),
648                                           q->txq[i].desc, q->txq[i].phys_addr);
649                         __skb_queue_purge(&q->txq[i].sendq);
650                 }
651
652         if (q->rspq.desc) {
653                 spin_lock_irq(&adapter->sge.reg_lock);
654                 t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
655                 spin_unlock_irq(&adapter->sge.reg_lock);
656                 dma_free_coherent(&pdev->dev,
657                                   q->rspq.size * sizeof(struct rsp_desc),
658                                   q->rspq.desc, q->rspq.phys_addr);
659         }
660
661         t3_reset_qset(q);
662 }
663
664 /**
665  *      init_qset_cntxt - initialize an SGE queue set context info
666  *      @qs: the queue set
667  *      @id: the queue set id
668  *
669  *      Initializes the TIDs and context ids for the queues of a queue set.
670  */
671 static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
672 {
673         qs->rspq.cntxt_id = id;
674         qs->fl[0].cntxt_id = 2 * id;
675         qs->fl[1].cntxt_id = 2 * id + 1;
676         qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
677         qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
678         qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
679         qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
680         qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
681 }
682
683 /**
684  *      sgl_len - calculates the size of an SGL of the given capacity
685  *      @n: the number of SGL entries
686  *
687  *      Calculates the number of flits needed for a scatter/gather list that
688  *      can hold the given number of entries.
689  */
690 static inline unsigned int sgl_len(unsigned int n)
691 {
692         /* alternatively: 3 * (n / 2) + 2 * (n & 1) */
693         return (3 * n) / 2 + (n & 1);
694 }
695
696 /**
697  *      flits_to_desc - returns the num of Tx descriptors for the given flits
698  *      @n: the number of flits
699  *
700  *      Calculates the number of Tx descriptors needed for the supplied number
701  *      of flits.
702  */
703 static inline unsigned int flits_to_desc(unsigned int n)
704 {
705         BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
706         return flit_desc_map[n];
707 }
708
709 /**
710  *      get_packet - return the next ingress packet buffer from a free list
711  *      @adap: the adapter that received the packet
712  *      @fl: the SGE free list holding the packet
713  *      @len: the packet length including any SGE padding
714  *      @drop_thres: # of remaining buffers before we start dropping packets
715  *
716  *      Get the next packet from a free list and complete setup of the
717  *      sk_buff.  If the packet is small we make a copy and recycle the
718  *      original buffer, otherwise we use the original buffer itself.  If a
719  *      positive drop threshold is supplied packets are dropped and their
720  *      buffers recycled if (a) the number of remaining buffers is under the
721  *      threshold and the packet is too big to copy, or (b) the packet should
722  *      be copied but there is no memory for the copy.
723  */
724 static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
725                                   unsigned int len, unsigned int drop_thres)
726 {
727         struct sk_buff *skb = NULL;
728         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
729
730         prefetch(sd->skb->data);
731         fl->credits--;
732
733         if (len <= SGE_RX_COPY_THRES) {
734                 skb = alloc_skb(len, GFP_ATOMIC);
735                 if (likely(skb != NULL)) {
736                         __skb_put(skb, len);
737                         pci_dma_sync_single_for_cpu(adap->pdev,
738                                             pci_unmap_addr(sd, dma_addr), len,
739                                             PCI_DMA_FROMDEVICE);
740                         memcpy(skb->data, sd->skb->data, len);
741                         pci_dma_sync_single_for_device(adap->pdev,
742                                             pci_unmap_addr(sd, dma_addr), len,
743                                             PCI_DMA_FROMDEVICE);
744                 } else if (!drop_thres)
745                         goto use_orig_buf;
746 recycle:
747                 recycle_rx_buf(adap, fl, fl->cidx);
748                 return skb;
749         }
750
751         if (unlikely(fl->credits < drop_thres) &&
752             refill_fl(adap, fl, min(MAX_RX_REFILL, fl->size - fl->credits - 1),
753                       GFP_ATOMIC | __GFP_COMP) == 0)
754                 goto recycle;
755
756 use_orig_buf:
757         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
758                          fl->buf_size, PCI_DMA_FROMDEVICE);
759         skb = sd->skb;
760         skb_put(skb, len);
761         __refill_fl(adap, fl);
762         return skb;
763 }
764
765 /**
766  *      get_packet_pg - return the next ingress packet buffer from a free list
767  *      @adap: the adapter that received the packet
768  *      @fl: the SGE free list holding the packet
769  *      @len: the packet length including any SGE padding
770  *      @drop_thres: # of remaining buffers before we start dropping packets
771  *
772  *      Get the next packet from a free list populated with page chunks.
773  *      If the packet is small we make a copy and recycle the original buffer,
774  *      otherwise we attach the original buffer as a page fragment to a fresh
775  *      sk_buff.  If a positive drop threshold is supplied packets are dropped
776  *      and their buffers recycled if (a) the number of remaining buffers is
777  *      under the threshold and the packet is too big to copy, or (b) there's
778  *      no system memory.
779  *
780  *      Note: this function is similar to @get_packet but deals with Rx buffers
781  *      that are page chunks rather than sk_buffs.
782  */
783 static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
784                                      struct sge_rspq *q, unsigned int len,
785                                      unsigned int drop_thres)
786 {
787         struct sk_buff *newskb, *skb;
788         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
789
790         newskb = skb = q->pg_skb;
791
792         if (!skb && (len <= SGE_RX_COPY_THRES)) {
793                 newskb = alloc_skb(len, GFP_ATOMIC);
794                 if (likely(newskb != NULL)) {
795                         __skb_put(newskb, len);
796                         pci_dma_sync_single_for_cpu(adap->pdev,
797                                             pci_unmap_addr(sd, dma_addr), len,
798                                             PCI_DMA_FROMDEVICE);
799                         memcpy(newskb->data, sd->pg_chunk.va, len);
800                         pci_dma_sync_single_for_device(adap->pdev,
801                                             pci_unmap_addr(sd, dma_addr), len,
802                                             PCI_DMA_FROMDEVICE);
803                 } else if (!drop_thres)
804                         return NULL;
805 recycle:
806                 fl->credits--;
807                 recycle_rx_buf(adap, fl, fl->cidx);
808                 q->rx_recycle_buf++;
809                 return newskb;
810         }
811
812         if (unlikely(q->rx_recycle_buf || (!skb && fl->credits <= drop_thres)))
813                 goto recycle;
814
815         if (!skb)
816                 newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
817         if (unlikely(!newskb)) {
818                 if (!drop_thres)
819                         return NULL;
820                 goto recycle;
821         }
822
823         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
824                          fl->buf_size, PCI_DMA_FROMDEVICE);
825         if (!skb) {
826                 __skb_put(newskb, SGE_RX_PULL_LEN);
827                 memcpy(newskb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
828                 skb_fill_page_desc(newskb, 0, sd->pg_chunk.page,
829                                    sd->pg_chunk.offset + SGE_RX_PULL_LEN,
830                                    len - SGE_RX_PULL_LEN);
831                 newskb->len = len;
832                 newskb->data_len = len - SGE_RX_PULL_LEN;
833                 newskb->truesize += newskb->data_len;
834         } else {
835                 skb_fill_page_desc(newskb, skb_shinfo(newskb)->nr_frags,
836                                    sd->pg_chunk.page,
837                                    sd->pg_chunk.offset, len);
838                 newskb->len += len;
839                 newskb->data_len += len;
840                 newskb->truesize += len;
841         }
842
843         fl->credits--;
844         /*
845          * We do not refill FLs here, we let the caller do it to overlap a
846          * prefetch.
847          */
848         return newskb;
849 }
850
851 /**
852  *      get_imm_packet - return the next ingress packet buffer from a response
853  *      @resp: the response descriptor containing the packet data
854  *
855  *      Return a packet containing the immediate data of the given response.
856  */
857 static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
858 {
859         struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
860
861         if (skb) {
862                 __skb_put(skb, IMMED_PKT_SIZE);
863                 skb_copy_to_linear_data(skb, resp->imm_data, IMMED_PKT_SIZE);
864         }
865         return skb;
866 }
867
868 /**
869  *      calc_tx_descs - calculate the number of Tx descriptors for a packet
870  *      @skb: the packet
871  *
872  *      Returns the number of Tx descriptors needed for the given Ethernet
873  *      packet.  Ethernet packets require addition of WR and CPL headers.
874  */
875 static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
876 {
877         unsigned int flits;
878
879         if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
880                 return 1;
881
882         flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
883         if (skb_shinfo(skb)->gso_size)
884                 flits++;
885         return flits_to_desc(flits);
886 }
887
888 /**
889  *      make_sgl - populate a scatter/gather list for a packet
890  *      @skb: the packet
891  *      @sgp: the SGL to populate
892  *      @start: start address of skb main body data to include in the SGL
893  *      @len: length of skb main body data to include in the SGL
894  *      @pdev: the PCI device
895  *
896  *      Generates a scatter/gather list for the buffers that make up a packet
897  *      and returns the SGL size in 8-byte words.  The caller must size the SGL
898  *      appropriately.
899  */
900 static inline unsigned int make_sgl(const struct sk_buff *skb,
901                                     struct sg_ent *sgp, unsigned char *start,
902                                     unsigned int len, struct pci_dev *pdev)
903 {
904         dma_addr_t mapping;
905         unsigned int i, j = 0, nfrags;
906
907         if (len) {
908                 mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
909                 sgp->len[0] = cpu_to_be32(len);
910                 sgp->addr[0] = cpu_to_be64(mapping);
911                 j = 1;
912         }
913
914         nfrags = skb_shinfo(skb)->nr_frags;
915         for (i = 0; i < nfrags; i++) {
916                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
917
918                 mapping = pci_map_page(pdev, frag->page, frag->page_offset,
919                                        frag->size, PCI_DMA_TODEVICE);
920                 sgp->len[j] = cpu_to_be32(frag->size);
921                 sgp->addr[j] = cpu_to_be64(mapping);
922                 j ^= 1;
923                 if (j == 0)
924                         ++sgp;
925         }
926         if (j)
927                 sgp->len[j] = 0;
928         return ((nfrags + (len != 0)) * 3) / 2 + j;
929 }
930
931 /**
932  *      check_ring_tx_db - check and potentially ring a Tx queue's doorbell
933  *      @adap: the adapter
934  *      @q: the Tx queue
935  *
936  *      Ring the doorbel if a Tx queue is asleep.  There is a natural race,
937  *      where the HW is going to sleep just after we checked, however,
938  *      then the interrupt handler will detect the outstanding TX packet
939  *      and ring the doorbell for us.
940  *
941  *      When GTS is disabled we unconditionally ring the doorbell.
942  */
943 static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
944 {
945 #if USE_GTS
946         clear_bit(TXQ_LAST_PKT_DB, &q->flags);
947         if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
948                 set_bit(TXQ_LAST_PKT_DB, &q->flags);
949                 t3_write_reg(adap, A_SG_KDOORBELL,
950                              F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
951         }
952 #else
953         wmb();                  /* write descriptors before telling HW */
954         t3_write_reg(adap, A_SG_KDOORBELL,
955                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
956 #endif
957 }
958
959 static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
960 {
961 #if SGE_NUM_GENBITS == 2
962         d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
963 #endif
964 }
965
966 /**
967  *      write_wr_hdr_sgl - write a WR header and, optionally, SGL
968  *      @ndesc: number of Tx descriptors spanned by the SGL
969  *      @skb: the packet corresponding to the WR
970  *      @d: first Tx descriptor to be written
971  *      @pidx: index of above descriptors
972  *      @q: the SGE Tx queue
973  *      @sgl: the SGL
974  *      @flits: number of flits to the start of the SGL in the first descriptor
975  *      @sgl_flits: the SGL size in flits
976  *      @gen: the Tx descriptor generation
977  *      @wr_hi: top 32 bits of WR header based on WR type (big endian)
978  *      @wr_lo: low 32 bits of WR header based on WR type (big endian)
979  *
980  *      Write a work request header and an associated SGL.  If the SGL is
981  *      small enough to fit into one Tx descriptor it has already been written
982  *      and we just need to write the WR header.  Otherwise we distribute the
983  *      SGL across the number of descriptors it spans.
984  */
985 static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
986                              struct tx_desc *d, unsigned int pidx,
987                              const struct sge_txq *q,
988                              const struct sg_ent *sgl,
989                              unsigned int flits, unsigned int sgl_flits,
990                              unsigned int gen, __be32 wr_hi,
991                              __be32 wr_lo)
992 {
993         struct work_request_hdr *wrp = (struct work_request_hdr *)d;
994         struct tx_sw_desc *sd = &q->sdesc[pidx];
995
996         sd->skb = skb;
997         if (need_skb_unmap()) {
998                 sd->fragidx = 0;
999                 sd->addr_idx = 0;
1000                 sd->sflit = flits;
1001         }
1002
1003         if (likely(ndesc == 1)) {
1004                 sd->eop = 1;
1005                 wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
1006                                    V_WR_SGLSFLT(flits)) | wr_hi;
1007                 wmb();
1008                 wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
1009                                    V_WR_GEN(gen)) | wr_lo;
1010                 wr_gen2(d, gen);
1011         } else {
1012                 unsigned int ogen = gen;
1013                 const u64 *fp = (const u64 *)sgl;
1014                 struct work_request_hdr *wp = wrp;
1015
1016                 wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
1017                                    V_WR_SGLSFLT(flits)) | wr_hi;
1018
1019                 while (sgl_flits) {
1020                         unsigned int avail = WR_FLITS - flits;
1021
1022                         if (avail > sgl_flits)
1023                                 avail = sgl_flits;
1024                         memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
1025                         sgl_flits -= avail;
1026                         ndesc--;
1027                         if (!sgl_flits)
1028                                 break;
1029
1030                         fp += avail;
1031                         d++;
1032                         sd->eop = 0;
1033                         sd++;
1034                         if (++pidx == q->size) {
1035                                 pidx = 0;
1036                                 gen ^= 1;
1037                                 d = q->desc;
1038                                 sd = q->sdesc;
1039                         }
1040
1041                         sd->skb = skb;
1042                         wrp = (struct work_request_hdr *)d;
1043                         wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
1044                                            V_WR_SGLSFLT(1)) | wr_hi;
1045                         wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
1046                                                         sgl_flits + 1)) |
1047                                            V_WR_GEN(gen)) | wr_lo;
1048                         wr_gen2(d, gen);
1049                         flits = 1;
1050                 }
1051                 sd->eop = 1;
1052                 wrp->wr_hi |= htonl(F_WR_EOP);
1053                 wmb();
1054                 wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
1055                 wr_gen2((struct tx_desc *)wp, ogen);
1056                 WARN_ON(ndesc != 0);
1057         }
1058 }
1059
1060 /**
1061  *      write_tx_pkt_wr - write a TX_PKT work request
1062  *      @adap: the adapter
1063  *      @skb: the packet to send
1064  *      @pi: the egress interface
1065  *      @pidx: index of the first Tx descriptor to write
1066  *      @gen: the generation value to use
1067  *      @q: the Tx queue
1068  *      @ndesc: number of descriptors the packet will occupy
1069  *      @compl: the value of the COMPL bit to use
1070  *
1071  *      Generate a TX_PKT work request to send the supplied packet.
1072  */
1073 static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
1074                             const struct port_info *pi,
1075                             unsigned int pidx, unsigned int gen,
1076                             struct sge_txq *q, unsigned int ndesc,
1077                             unsigned int compl)
1078 {
1079         unsigned int flits, sgl_flits, cntrl, tso_info;
1080         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1081         struct tx_desc *d = &q->desc[pidx];
1082         struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
1083
1084         cpl->len = htonl(skb->len | 0x80000000);
1085         cntrl = V_TXPKT_INTF(pi->port_id);
1086
1087         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1088                 cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
1089
1090         tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
1091         if (tso_info) {
1092                 int eth_type;
1093                 struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
1094
1095                 d->flit[2] = 0;
1096                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
1097                 hdr->cntrl = htonl(cntrl);
1098                 eth_type = skb_network_offset(skb) == ETH_HLEN ?
1099                     CPL_ETH_II : CPL_ETH_II_VLAN;
1100                 tso_info |= V_LSO_ETH_TYPE(eth_type) |
1101                     V_LSO_IPHDR_WORDS(ip_hdr(skb)->ihl) |
1102                     V_LSO_TCPHDR_WORDS(tcp_hdr(skb)->doff);
1103                 hdr->lso_info = htonl(tso_info);
1104                 flits = 3;
1105         } else {
1106                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
1107                 cntrl |= F_TXPKT_IPCSUM_DIS;    /* SW calculates IP csum */
1108                 cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
1109                 cpl->cntrl = htonl(cntrl);
1110
1111                 if (skb->len <= WR_LEN - sizeof(*cpl)) {
1112                         q->sdesc[pidx].skb = NULL;
1113                         if (!skb->data_len)
1114                                 skb_copy_from_linear_data(skb, &d->flit[2],
1115                                                           skb->len);
1116                         else
1117                                 skb_copy_bits(skb, 0, &d->flit[2], skb->len);
1118
1119                         flits = (skb->len + 7) / 8 + 2;
1120                         cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
1121                                               V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
1122                                               | F_WR_SOP | F_WR_EOP | compl);
1123                         wmb();
1124                         cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
1125                                               V_WR_TID(q->token));
1126                         wr_gen2(d, gen);
1127                         kfree_skb(skb);
1128                         return;
1129                 }
1130
1131                 flits = 2;
1132         }
1133
1134         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1135         sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
1136
1137         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
1138                          htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
1139                          htonl(V_WR_TID(q->token)));
1140 }
1141
1142 static inline void t3_stop_tx_queue(struct netdev_queue *txq,
1143                                     struct sge_qset *qs, struct sge_txq *q)
1144 {
1145         netif_tx_stop_queue(txq);
1146         set_bit(TXQ_ETH, &qs->txq_stopped);
1147         q->stops++;
1148 }
1149
1150 /**
1151  *      eth_xmit - add a packet to the Ethernet Tx queue
1152  *      @skb: the packet
1153  *      @dev: the egress net device
1154  *
1155  *      Add a packet to an SGE Tx queue.  Runs with softirqs disabled.
1156  */
1157 int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
1158 {
1159         int qidx;
1160         unsigned int ndesc, pidx, credits, gen, compl;
1161         const struct port_info *pi = netdev_priv(dev);
1162         struct adapter *adap = pi->adapter;
1163         struct netdev_queue *txq;
1164         struct sge_qset *qs;
1165         struct sge_txq *q;
1166
1167         /*
1168          * The chip min packet length is 9 octets but play safe and reject
1169          * anything shorter than an Ethernet header.
1170          */
1171         if (unlikely(skb->len < ETH_HLEN)) {
1172                 dev_kfree_skb(skb);
1173                 return NETDEV_TX_OK;
1174         }
1175
1176         qidx = skb_get_queue_mapping(skb);
1177         qs = &pi->qs[qidx];
1178         q = &qs->txq[TXQ_ETH];
1179         txq = netdev_get_tx_queue(dev, qidx);
1180
1181         spin_lock(&q->lock);
1182         reclaim_completed_tx(adap, q);
1183
1184         credits = q->size - q->in_use;
1185         ndesc = calc_tx_descs(skb);
1186
1187         if (unlikely(credits < ndesc)) {
1188                 t3_stop_tx_queue(txq, qs, q);
1189                 dev_err(&adap->pdev->dev,
1190                         "%s: Tx ring %u full while queue awake!\n",
1191                         dev->name, q->cntxt_id & 7);
1192                 spin_unlock(&q->lock);
1193                 return NETDEV_TX_BUSY;
1194         }
1195
1196         q->in_use += ndesc;
1197         if (unlikely(credits - ndesc < q->stop_thres)) {
1198                 t3_stop_tx_queue(txq, qs, q);
1199
1200                 if (should_restart_tx(q) &&
1201                     test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1202                         q->restarts++;
1203                         netif_tx_wake_queue(txq);
1204                 }
1205         }
1206
1207         gen = q->gen;
1208         q->unacked += ndesc;
1209         compl = (q->unacked & 8) << (S_WR_COMPL - 3);
1210         q->unacked &= 7;
1211         pidx = q->pidx;
1212         q->pidx += ndesc;
1213         if (q->pidx >= q->size) {
1214                 q->pidx -= q->size;
1215                 q->gen ^= 1;
1216         }
1217
1218         /* update port statistics */
1219         if (skb->ip_summed == CHECKSUM_COMPLETE)
1220                 qs->port_stats[SGE_PSTAT_TX_CSUM]++;
1221         if (skb_shinfo(skb)->gso_size)
1222                 qs->port_stats[SGE_PSTAT_TSO]++;
1223         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1224                 qs->port_stats[SGE_PSTAT_VLANINS]++;
1225
1226         dev->trans_start = jiffies;
1227         spin_unlock(&q->lock);
1228
1229         /*
1230          * We do not use Tx completion interrupts to free DMAd Tx packets.
1231          * This is good for performamce but means that we rely on new Tx
1232          * packets arriving to run the destructors of completed packets,
1233          * which open up space in their sockets' send queues.  Sometimes
1234          * we do not get such new packets causing Tx to stall.  A single
1235          * UDP transmitter is a good example of this situation.  We have
1236          * a clean up timer that periodically reclaims completed packets
1237          * but it doesn't run often enough (nor do we want it to) to prevent
1238          * lengthy stalls.  A solution to this problem is to run the
1239          * destructor early, after the packet is queued but before it's DMAd.
1240          * A cons is that we lie to socket memory accounting, but the amount
1241          * of extra memory is reasonable (limited by the number of Tx
1242          * descriptors), the packets do actually get freed quickly by new
1243          * packets almost always, and for protocols like TCP that wait for
1244          * acks to really free up the data the extra memory is even less.
1245          * On the positive side we run the destructors on the sending CPU
1246          * rather than on a potentially different completing CPU, usually a
1247          * good thing.  We also run them without holding our Tx queue lock,
1248          * unlike what reclaim_completed_tx() would otherwise do.
1249          *
1250          * Run the destructor before telling the DMA engine about the packet
1251          * to make sure it doesn't complete and get freed prematurely.
1252          */
1253         if (likely(!skb_shared(skb)))
1254                 skb_orphan(skb);
1255
1256         write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
1257         check_ring_tx_db(adap, q);
1258         return NETDEV_TX_OK;
1259 }
1260
1261 /**
1262  *      write_imm - write a packet into a Tx descriptor as immediate data
1263  *      @d: the Tx descriptor to write
1264  *      @skb: the packet
1265  *      @len: the length of packet data to write as immediate data
1266  *      @gen: the generation bit value to write
1267  *
1268  *      Writes a packet as immediate data into a Tx descriptor.  The packet
1269  *      contains a work request at its beginning.  We must write the packet
1270  *      carefully so the SGE doesn't read it accidentally before it's written
1271  *      in its entirety.
1272  */
1273 static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
1274                              unsigned int len, unsigned int gen)
1275 {
1276         struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
1277         struct work_request_hdr *to = (struct work_request_hdr *)d;
1278
1279         if (likely(!skb->data_len))
1280                 memcpy(&to[1], &from[1], len - sizeof(*from));
1281         else
1282                 skb_copy_bits(skb, sizeof(*from), &to[1], len - sizeof(*from));
1283
1284         to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
1285                                         V_WR_BCNTLFLT(len & 7));
1286         wmb();
1287         to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
1288                                         V_WR_LEN((len + 7) / 8));
1289         wr_gen2(d, gen);
1290         kfree_skb(skb);
1291 }
1292
1293 /**
1294  *      check_desc_avail - check descriptor availability on a send queue
1295  *      @adap: the adapter
1296  *      @q: the send queue
1297  *      @skb: the packet needing the descriptors
1298  *      @ndesc: the number of Tx descriptors needed
1299  *      @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
1300  *
1301  *      Checks if the requested number of Tx descriptors is available on an
1302  *      SGE send queue.  If the queue is already suspended or not enough
1303  *      descriptors are available the packet is queued for later transmission.
1304  *      Must be called with the Tx queue locked.
1305  *
1306  *      Returns 0 if enough descriptors are available, 1 if there aren't
1307  *      enough descriptors and the packet has been queued, and 2 if the caller
1308  *      needs to retry because there weren't enough descriptors at the
1309  *      beginning of the call but some freed up in the mean time.
1310  */
1311 static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
1312                                    struct sk_buff *skb, unsigned int ndesc,
1313                                    unsigned int qid)
1314 {
1315         if (unlikely(!skb_queue_empty(&q->sendq))) {
1316               addq_exit:__skb_queue_tail(&q->sendq, skb);
1317                 return 1;
1318         }
1319         if (unlikely(q->size - q->in_use < ndesc)) {
1320                 struct sge_qset *qs = txq_to_qset(q, qid);
1321
1322                 set_bit(qid, &qs->txq_stopped);
1323                 smp_mb__after_clear_bit();
1324
1325                 if (should_restart_tx(q) &&
1326                     test_and_clear_bit(qid, &qs->txq_stopped))
1327                         return 2;
1328
1329                 q->stops++;
1330                 goto addq_exit;
1331         }
1332         return 0;
1333 }
1334
1335 /**
1336  *      reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
1337  *      @q: the SGE control Tx queue
1338  *
1339  *      This is a variant of reclaim_completed_tx() that is used for Tx queues
1340  *      that send only immediate data (presently just the control queues) and
1341  *      thus do not have any sk_buffs to release.
1342  */
1343 static inline void reclaim_completed_tx_imm(struct sge_txq *q)
1344 {
1345         unsigned int reclaim = q->processed - q->cleaned;
1346
1347         q->in_use -= reclaim;
1348         q->cleaned += reclaim;
1349 }
1350
1351 static inline int immediate(const struct sk_buff *skb)
1352 {
1353         return skb->len <= WR_LEN;
1354 }
1355
1356 /**
1357  *      ctrl_xmit - send a packet through an SGE control Tx queue
1358  *      @adap: the adapter
1359  *      @q: the control queue
1360  *      @skb: the packet
1361  *
1362  *      Send a packet through an SGE control Tx queue.  Packets sent through
1363  *      a control queue must fit entirely as immediate data in a single Tx
1364  *      descriptor and have no page fragments.
1365  */
1366 static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
1367                      struct sk_buff *skb)
1368 {
1369         int ret;
1370         struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
1371
1372         if (unlikely(!immediate(skb))) {
1373                 WARN_ON(1);
1374                 dev_kfree_skb(skb);
1375                 return NET_XMIT_SUCCESS;
1376         }
1377
1378         wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
1379         wrp->wr_lo = htonl(V_WR_TID(q->token));
1380
1381         spin_lock(&q->lock);
1382       again:reclaim_completed_tx_imm(q);
1383
1384         ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
1385         if (unlikely(ret)) {
1386                 if (ret == 1) {
1387                         spin_unlock(&q->lock);
1388                         return NET_XMIT_CN;
1389                 }
1390                 goto again;
1391         }
1392
1393         write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1394
1395         q->in_use++;
1396         if (++q->pidx >= q->size) {
1397                 q->pidx = 0;
1398                 q->gen ^= 1;
1399         }
1400         spin_unlock(&q->lock);
1401         wmb();
1402         t3_write_reg(adap, A_SG_KDOORBELL,
1403                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1404         return NET_XMIT_SUCCESS;
1405 }
1406
1407 /**
1408  *      restart_ctrlq - restart a suspended control queue
1409  *      @qs: the queue set cotaining the control queue
1410  *
1411  *      Resumes transmission on a suspended Tx control queue.
1412  */
1413 static void restart_ctrlq(unsigned long data)
1414 {
1415         struct sk_buff *skb;
1416         struct sge_qset *qs = (struct sge_qset *)data;
1417         struct sge_txq *q = &qs->txq[TXQ_CTRL];
1418
1419         spin_lock(&q->lock);
1420       again:reclaim_completed_tx_imm(q);
1421
1422         while (q->in_use < q->size &&
1423                (skb = __skb_dequeue(&q->sendq)) != NULL) {
1424
1425                 write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1426
1427                 if (++q->pidx >= q->size) {
1428                         q->pidx = 0;
1429                         q->gen ^= 1;
1430                 }
1431                 q->in_use++;
1432         }
1433
1434         if (!skb_queue_empty(&q->sendq)) {
1435                 set_bit(TXQ_CTRL, &qs->txq_stopped);
1436                 smp_mb__after_clear_bit();
1437
1438                 if (should_restart_tx(q) &&
1439                     test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
1440                         goto again;
1441                 q->stops++;
1442         }
1443
1444         spin_unlock(&q->lock);
1445         wmb();
1446         t3_write_reg(qs->adap, A_SG_KDOORBELL,
1447                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1448 }
1449
1450 /*
1451  * Send a management message through control queue 0
1452  */
1453 int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
1454 {
1455         int ret;
1456         local_bh_disable();
1457         ret = ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
1458         local_bh_enable();
1459
1460         return ret;
1461 }
1462
1463 /**
1464  *      deferred_unmap_destructor - unmap a packet when it is freed
1465  *      @skb: the packet
1466  *
1467  *      This is the packet destructor used for Tx packets that need to remain
1468  *      mapped until they are freed rather than until their Tx descriptors are
1469  *      freed.
1470  */
1471 static void deferred_unmap_destructor(struct sk_buff *skb)
1472 {
1473         int i;
1474         const dma_addr_t *p;
1475         const struct skb_shared_info *si;
1476         const struct deferred_unmap_info *dui;
1477
1478         dui = (struct deferred_unmap_info *)skb->head;
1479         p = dui->addr;
1480
1481         if (skb->tail - skb->transport_header)
1482                 pci_unmap_single(dui->pdev, *p++,
1483                                  skb->tail - skb->transport_header,
1484                                  PCI_DMA_TODEVICE);
1485
1486         si = skb_shinfo(skb);
1487         for (i = 0; i < si->nr_frags; i++)
1488                 pci_unmap_page(dui->pdev, *p++, si->frags[i].size,
1489                                PCI_DMA_TODEVICE);
1490 }
1491
1492 static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
1493                                      const struct sg_ent *sgl, int sgl_flits)
1494 {
1495         dma_addr_t *p;
1496         struct deferred_unmap_info *dui;
1497
1498         dui = (struct deferred_unmap_info *)skb->head;
1499         dui->pdev = pdev;
1500         for (p = dui->addr; sgl_flits >= 3; sgl++, sgl_flits -= 3) {
1501                 *p++ = be64_to_cpu(sgl->addr[0]);
1502                 *p++ = be64_to_cpu(sgl->addr[1]);
1503         }
1504         if (sgl_flits)
1505                 *p = be64_to_cpu(sgl->addr[0]);
1506 }
1507
1508 /**
1509  *      write_ofld_wr - write an offload work request
1510  *      @adap: the adapter
1511  *      @skb: the packet to send
1512  *      @q: the Tx queue
1513  *      @pidx: index of the first Tx descriptor to write
1514  *      @gen: the generation value to use
1515  *      @ndesc: number of descriptors the packet will occupy
1516  *
1517  *      Write an offload work request to send the supplied packet.  The packet
1518  *      data already carry the work request with most fields populated.
1519  */
1520 static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
1521                           struct sge_txq *q, unsigned int pidx,
1522                           unsigned int gen, unsigned int ndesc)
1523 {
1524         unsigned int sgl_flits, flits;
1525         struct work_request_hdr *from;
1526         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1527         struct tx_desc *d = &q->desc[pidx];
1528
1529         if (immediate(skb)) {
1530                 q->sdesc[pidx].skb = NULL;
1531                 write_imm(d, skb, skb->len, gen);
1532                 return;
1533         }
1534
1535         /* Only TX_DATA builds SGLs */
1536
1537         from = (struct work_request_hdr *)skb->data;
1538         memcpy(&d->flit[1], &from[1],
1539                skb_transport_offset(skb) - sizeof(*from));
1540
1541         flits = skb_transport_offset(skb) / 8;
1542         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1543         sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
1544                              skb->tail - skb->transport_header,
1545                              adap->pdev);
1546         if (need_skb_unmap()) {
1547                 setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
1548                 skb->destructor = deferred_unmap_destructor;
1549         }
1550
1551         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
1552                          gen, from->wr_hi, from->wr_lo);
1553 }
1554
1555 /**
1556  *      calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
1557  *      @skb: the packet
1558  *
1559  *      Returns the number of Tx descriptors needed for the given offload
1560  *      packet.  These packets are already fully constructed.
1561  */
1562 static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
1563 {
1564         unsigned int flits, cnt;
1565
1566         if (skb->len <= WR_LEN)
1567                 return 1;       /* packet fits as immediate data */
1568
1569         flits = skb_transport_offset(skb) / 8;  /* headers */
1570         cnt = skb_shinfo(skb)->nr_frags;
1571         if (skb->tail != skb->transport_header)
1572                 cnt++;
1573         return flits_to_desc(flits + sgl_len(cnt));
1574 }
1575
1576 /**
1577  *      ofld_xmit - send a packet through an offload queue
1578  *      @adap: the adapter
1579  *      @q: the Tx offload queue
1580  *      @skb: the packet
1581  *
1582  *      Send an offload packet through an SGE offload queue.
1583  */
1584 static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
1585                      struct sk_buff *skb)
1586 {
1587         int ret;
1588         unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
1589
1590         spin_lock(&q->lock);
1591       again:reclaim_completed_tx(adap, q);
1592
1593         ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
1594         if (unlikely(ret)) {
1595                 if (ret == 1) {
1596                         skb->priority = ndesc;  /* save for restart */
1597                         spin_unlock(&q->lock);
1598                         return NET_XMIT_CN;
1599                 }
1600                 goto again;
1601         }
1602
1603         gen = q->gen;
1604         q->in_use += ndesc;
1605         pidx = q->pidx;
1606         q->pidx += ndesc;
1607         if (q->pidx >= q->size) {
1608                 q->pidx -= q->size;
1609                 q->gen ^= 1;
1610         }
1611         spin_unlock(&q->lock);
1612
1613         write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1614         check_ring_tx_db(adap, q);
1615         return NET_XMIT_SUCCESS;
1616 }
1617
1618 /**
1619  *      restart_offloadq - restart a suspended offload queue
1620  *      @qs: the queue set cotaining the offload queue
1621  *
1622  *      Resumes transmission on a suspended Tx offload queue.
1623  */
1624 static void restart_offloadq(unsigned long data)
1625 {
1626         struct sk_buff *skb;
1627         struct sge_qset *qs = (struct sge_qset *)data;
1628         struct sge_txq *q = &qs->txq[TXQ_OFLD];
1629         const struct port_info *pi = netdev_priv(qs->netdev);
1630         struct adapter *adap = pi->adapter;
1631
1632         spin_lock(&q->lock);
1633       again:reclaim_completed_tx(adap, q);
1634
1635         while ((skb = skb_peek(&q->sendq)) != NULL) {
1636                 unsigned int gen, pidx;
1637                 unsigned int ndesc = skb->priority;
1638
1639                 if (unlikely(q->size - q->in_use < ndesc)) {
1640                         set_bit(TXQ_OFLD, &qs->txq_stopped);
1641                         smp_mb__after_clear_bit();
1642
1643                         if (should_restart_tx(q) &&
1644                             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
1645                                 goto again;
1646                         q->stops++;
1647                         break;
1648                 }
1649
1650                 gen = q->gen;
1651                 q->in_use += ndesc;
1652                 pidx = q->pidx;
1653                 q->pidx += ndesc;
1654                 if (q->pidx >= q->size) {
1655                         q->pidx -= q->size;
1656                         q->gen ^= 1;
1657                 }
1658                 __skb_unlink(skb, &q->sendq);
1659                 spin_unlock(&q->lock);
1660
1661                 write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1662                 spin_lock(&q->lock);
1663         }
1664         spin_unlock(&q->lock);
1665
1666 #if USE_GTS
1667         set_bit(TXQ_RUNNING, &q->flags);
1668         set_bit(TXQ_LAST_PKT_DB, &q->flags);
1669 #endif
1670         wmb();
1671         t3_write_reg(adap, A_SG_KDOORBELL,
1672                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1673 }
1674
1675 /**
1676  *      queue_set - return the queue set a packet should use
1677  *      @skb: the packet
1678  *
1679  *      Maps a packet to the SGE queue set it should use.  The desired queue
1680  *      set is carried in bits 1-3 in the packet's priority.
1681  */
1682 static inline int queue_set(const struct sk_buff *skb)
1683 {
1684         return skb->priority >> 1;
1685 }
1686
1687 /**
1688  *      is_ctrl_pkt - return whether an offload packet is a control packet
1689  *      @skb: the packet
1690  *
1691  *      Determines whether an offload packet should use an OFLD or a CTRL
1692  *      Tx queue.  This is indicated by bit 0 in the packet's priority.
1693  */
1694 static inline int is_ctrl_pkt(const struct sk_buff *skb)
1695 {
1696         return skb->priority & 1;
1697 }
1698
1699 /**
1700  *      t3_offload_tx - send an offload packet
1701  *      @tdev: the offload device to send to
1702  *      @skb: the packet
1703  *
1704  *      Sends an offload packet.  We use the packet priority to select the
1705  *      appropriate Tx queue as follows: bit 0 indicates whether the packet
1706  *      should be sent as regular or control, bits 1-3 select the queue set.
1707  */
1708 int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
1709 {
1710         struct adapter *adap = tdev2adap(tdev);
1711         struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
1712
1713         if (unlikely(is_ctrl_pkt(skb)))
1714                 return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
1715
1716         return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
1717 }
1718
1719 /**
1720  *      offload_enqueue - add an offload packet to an SGE offload receive queue
1721  *      @q: the SGE response queue
1722  *      @skb: the packet
1723  *
1724  *      Add a new offload packet to an SGE response queue's offload packet
1725  *      queue.  If the packet is the first on the queue it schedules the RX
1726  *      softirq to process the queue.
1727  */
1728 static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
1729 {
1730         int was_empty = skb_queue_empty(&q->rx_queue);
1731
1732         __skb_queue_tail(&q->rx_queue, skb);
1733
1734         if (was_empty) {
1735                 struct sge_qset *qs = rspq_to_qset(q);
1736
1737                 napi_schedule(&qs->napi);
1738         }
1739 }
1740
1741 /**
1742  *      deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
1743  *      @tdev: the offload device that will be receiving the packets
1744  *      @q: the SGE response queue that assembled the bundle
1745  *      @skbs: the partial bundle
1746  *      @n: the number of packets in the bundle
1747  *
1748  *      Delivers a (partial) bundle of Rx offload packets to an offload device.
1749  */
1750 static inline void deliver_partial_bundle(struct t3cdev *tdev,
1751                                           struct sge_rspq *q,
1752                                           struct sk_buff *skbs[], int n)
1753 {
1754         if (n) {
1755                 q->offload_bundles++;
1756                 tdev->recv(tdev, skbs, n);
1757         }
1758 }
1759
1760 /**
1761  *      ofld_poll - NAPI handler for offload packets in interrupt mode
1762  *      @dev: the network device doing the polling
1763  *      @budget: polling budget
1764  *
1765  *      The NAPI handler for offload packets when a response queue is serviced
1766  *      by the hard interrupt handler, i.e., when it's operating in non-polling
1767  *      mode.  Creates small packet batches and sends them through the offload
1768  *      receive handler.  Batches need to be of modest size as we do prefetches
1769  *      on the packets in each.
1770  */
1771 static int ofld_poll(struct napi_struct *napi, int budget)
1772 {
1773         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
1774         struct sge_rspq *q = &qs->rspq;
1775         struct adapter *adapter = qs->adap;
1776         int work_done = 0;
1777
1778         while (work_done < budget) {
1779                 struct sk_buff *skb, *tmp, *skbs[RX_BUNDLE_SIZE];
1780                 struct sk_buff_head queue;
1781                 int ngathered;
1782
1783                 spin_lock_irq(&q->lock);
1784                 __skb_queue_head_init(&queue);
1785                 skb_queue_splice_init(&q->rx_queue, &queue);
1786                 if (skb_queue_empty(&queue)) {
1787                         napi_complete(napi);
1788                         spin_unlock_irq(&q->lock);
1789                         return work_done;
1790                 }
1791                 spin_unlock_irq(&q->lock);
1792
1793                 ngathered = 0;
1794                 skb_queue_walk_safe(&queue, skb, tmp) {
1795                         if (work_done >= budget)
1796                                 break;
1797                         work_done++;
1798
1799                         __skb_unlink(skb, &queue);
1800                         prefetch(skb->data);
1801                         skbs[ngathered] = skb;
1802                         if (++ngathered == RX_BUNDLE_SIZE) {
1803                                 q->offload_bundles++;
1804                                 adapter->tdev.recv(&adapter->tdev, skbs,
1805                                                    ngathered);
1806                                 ngathered = 0;
1807                         }
1808                 }
1809                 if (!skb_queue_empty(&queue)) {
1810                         /* splice remaining packets back onto Rx queue */
1811                         spin_lock_irq(&q->lock);
1812                         skb_queue_splice(&queue, &q->rx_queue);
1813                         spin_unlock_irq(&q->lock);
1814                 }
1815                 deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
1816         }
1817
1818         return work_done;
1819 }
1820
1821 /**
1822  *      rx_offload - process a received offload packet
1823  *      @tdev: the offload device receiving the packet
1824  *      @rq: the response queue that received the packet
1825  *      @skb: the packet
1826  *      @rx_gather: a gather list of packets if we are building a bundle
1827  *      @gather_idx: index of the next available slot in the bundle
1828  *
1829  *      Process an ingress offload pakcet and add it to the offload ingress
1830  *      queue.  Returns the index of the next available slot in the bundle.
1831  */
1832 static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
1833                              struct sk_buff *skb, struct sk_buff *rx_gather[],
1834                              unsigned int gather_idx)
1835 {
1836         skb_reset_mac_header(skb);
1837         skb_reset_network_header(skb);
1838         skb_reset_transport_header(skb);
1839
1840         if (rq->polling) {
1841                 rx_gather[gather_idx++] = skb;
1842                 if (gather_idx == RX_BUNDLE_SIZE) {
1843                         tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
1844                         gather_idx = 0;
1845                         rq->offload_bundles++;
1846                 }
1847         } else
1848                 offload_enqueue(rq, skb);
1849
1850         return gather_idx;
1851 }
1852
1853 /**
1854  *      restart_tx - check whether to restart suspended Tx queues
1855  *      @qs: the queue set to resume
1856  *
1857  *      Restarts suspended Tx queues of an SGE queue set if they have enough
1858  *      free resources to resume operation.
1859  */
1860 static void restart_tx(struct sge_qset *qs)
1861 {
1862         if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
1863             should_restart_tx(&qs->txq[TXQ_ETH]) &&
1864             test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1865                 qs->txq[TXQ_ETH].restarts++;
1866                 if (netif_running(qs->netdev))
1867                         netif_tx_wake_queue(qs->tx_q);
1868         }
1869
1870         if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
1871             should_restart_tx(&qs->txq[TXQ_OFLD]) &&
1872             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
1873                 qs->txq[TXQ_OFLD].restarts++;
1874                 tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
1875         }
1876         if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
1877             should_restart_tx(&qs->txq[TXQ_CTRL]) &&
1878             test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
1879                 qs->txq[TXQ_CTRL].restarts++;
1880                 tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
1881         }
1882 }
1883
1884 /**
1885  *      cxgb3_arp_process - process an ARP request probing a private IP address
1886  *      @adapter: the adapter
1887  *      @skb: the skbuff containing the ARP request
1888  *
1889  *      Check if the ARP request is probing the private IP address
1890  *      dedicated to iSCSI, generate an ARP reply if so.
1891  */
1892 static void cxgb3_arp_process(struct adapter *adapter, struct sk_buff *skb)
1893 {
1894         struct net_device *dev = skb->dev;
1895         struct port_info *pi;
1896         struct arphdr *arp;
1897         unsigned char *arp_ptr;
1898         unsigned char *sha;
1899         __be32 sip, tip;
1900
1901         if (!dev)
1902                 return;
1903
1904         skb_reset_network_header(skb);
1905         arp = arp_hdr(skb);
1906
1907         if (arp->ar_op != htons(ARPOP_REQUEST))
1908                 return;
1909
1910         arp_ptr = (unsigned char *)(arp + 1);
1911         sha = arp_ptr;
1912         arp_ptr += dev->addr_len;
1913         memcpy(&sip, arp_ptr, sizeof(sip));
1914         arp_ptr += sizeof(sip);
1915         arp_ptr += dev->addr_len;
1916         memcpy(&tip, arp_ptr, sizeof(tip));
1917
1918         pi = netdev_priv(dev);
1919         if (tip != pi->iscsi_ipv4addr)
1920                 return;
1921
1922         arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
1923                  dev->dev_addr, sha);
1924
1925 }
1926
1927 static inline int is_arp(struct sk_buff *skb)
1928 {
1929         return skb->protocol == htons(ETH_P_ARP);
1930 }
1931
1932 /**
1933  *      rx_eth - process an ingress ethernet packet
1934  *      @adap: the adapter
1935  *      @rq: the response queue that received the packet
1936  *      @skb: the packet
1937  *      @pad: amount of padding at the start of the buffer
1938  *
1939  *      Process an ingress ethernet pakcet and deliver it to the stack.
1940  *      The padding is 2 if the packet was delivered in an Rx buffer and 0
1941  *      if it was immediate data in a response.
1942  */
1943 static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
1944                    struct sk_buff *skb, int pad, int lro)
1945 {
1946         struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
1947         struct sge_qset *qs = rspq_to_qset(rq);
1948         struct port_info *pi;
1949
1950         skb_pull(skb, sizeof(*p) + pad);
1951         skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
1952         pi = netdev_priv(skb->dev);
1953         if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid && p->csum == htons(0xffff) &&
1954             !p->fragment) {
1955                 qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
1956                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1957         } else
1958                 skb->ip_summed = CHECKSUM_NONE;
1959         skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
1960
1961         if (unlikely(p->vlan_valid)) {
1962                 struct vlan_group *grp = pi->vlan_grp;
1963
1964                 qs->port_stats[SGE_PSTAT_VLANEX]++;
1965                 if (likely(grp))
1966                         if (lro)
1967                                 vlan_gro_receive(&qs->napi, grp,
1968                                                  ntohs(p->vlan), skb);
1969                         else {
1970                                 if (unlikely(pi->iscsi_ipv4addr &&
1971                                     is_arp(skb))) {
1972                                         unsigned short vtag = ntohs(p->vlan) &
1973                                                                 VLAN_VID_MASK;
1974                                         skb->dev = vlan_group_get_device(grp,
1975                                                                          vtag);
1976                                         cxgb3_arp_process(adap, skb);
1977                                 }
1978                                 __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
1979                                                   rq->polling);
1980                         }
1981                 else
1982                         dev_kfree_skb_any(skb);
1983         } else if (rq->polling) {
1984                 if (lro)
1985                         napi_gro_receive(&qs->napi, skb);
1986                 else {
1987                         if (unlikely(pi->iscsi_ipv4addr && is_arp(skb)))
1988                                 cxgb3_arp_process(adap, skb);
1989                         netif_receive_skb(skb);
1990                 }
1991         } else
1992                 netif_rx(skb);
1993 }
1994
1995 static inline int is_eth_tcp(u32 rss)
1996 {
1997         return G_HASHTYPE(ntohl(rss)) == RSS_HASH_4_TUPLE;
1998 }
1999
2000 /**
2001  *      lro_add_page - add a page chunk to an LRO session
2002  *      @adap: the adapter
2003  *      @qs: the associated queue set
2004  *      @fl: the free list containing the page chunk to add
2005  *      @len: packet length
2006  *      @complete: Indicates the last fragment of a frame
2007  *
2008  *      Add a received packet contained in a page chunk to an existing LRO
2009  *      session.
2010  */
2011 static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
2012                          struct sge_fl *fl, int len, int complete)
2013 {
2014         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
2015         struct cpl_rx_pkt *cpl;
2016         struct skb_frag_struct *rx_frag = qs->lro_frag_tbl.frags;
2017         int nr_frags = qs->lro_frag_tbl.nr_frags;
2018         int frag_len = qs->lro_frag_tbl.len;
2019         int offset = 0;
2020
2021         if (!nr_frags) {
2022                 offset = 2 + sizeof(struct cpl_rx_pkt);
2023                 qs->lro_va = cpl = sd->pg_chunk.va + 2;
2024         }
2025
2026         fl->credits--;
2027
2028         len -= offset;
2029         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
2030                          fl->buf_size, PCI_DMA_FROMDEVICE);
2031
2032         rx_frag += nr_frags;
2033         rx_frag->page = sd->pg_chunk.page;
2034         rx_frag->page_offset = sd->pg_chunk.offset + offset;
2035         rx_frag->size = len;
2036         frag_len += len;
2037         qs->lro_frag_tbl.nr_frags++;
2038         qs->lro_frag_tbl.len = frag_len;
2039
2040         if (!complete)
2041                 return;
2042
2043         qs->lro_frag_tbl.ip_summed = CHECKSUM_UNNECESSARY;
2044         cpl = qs->lro_va;
2045
2046         if (unlikely(cpl->vlan_valid)) {
2047                 struct net_device *dev = qs->netdev;
2048                 struct port_info *pi = netdev_priv(dev);
2049                 struct vlan_group *grp = pi->vlan_grp;
2050
2051                 if (likely(grp != NULL)) {
2052                         vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan),
2053                                        &qs->lro_frag_tbl);
2054                         goto out;
2055                 }
2056         }
2057         napi_gro_frags(&qs->napi, &qs->lro_frag_tbl);
2058
2059 out:
2060         qs->lro_frag_tbl.nr_frags = qs->lro_frag_tbl.len = 0;
2061 }
2062
2063 /**
2064  *      handle_rsp_cntrl_info - handles control information in a response
2065  *      @qs: the queue set corresponding to the response
2066  *      @flags: the response control flags
2067  *
2068  *      Handles the control information of an SGE response, such as GTS
2069  *      indications and completion credits for the queue set's Tx queues.
2070  *      HW coalesces credits, we don't do any extra SW coalescing.
2071  */
2072 static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
2073 {
2074         unsigned int credits;
2075
2076 #if USE_GTS
2077         if (flags & F_RSPD_TXQ0_GTS)
2078                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
2079 #endif
2080
2081         credits = G_RSPD_TXQ0_CR(flags);
2082         if (credits)
2083                 qs->txq[TXQ_ETH].processed += credits;
2084
2085         credits = G_RSPD_TXQ2_CR(flags);
2086         if (credits)
2087                 qs->txq[TXQ_CTRL].processed += credits;
2088
2089 # if USE_GTS
2090         if (flags & F_RSPD_TXQ1_GTS)
2091                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
2092 # endif
2093         credits = G_RSPD_TXQ1_CR(flags);
2094         if (credits)
2095                 qs->txq[TXQ_OFLD].processed += credits;
2096 }
2097
2098 /**
2099  *      check_ring_db - check if we need to ring any doorbells
2100  *      @adapter: the adapter
2101  *      @qs: the queue set whose Tx queues are to be examined
2102  *      @sleeping: indicates which Tx queue sent GTS
2103  *
2104  *      Checks if some of a queue set's Tx queues need to ring their doorbells
2105  *      to resume transmission after idling while they still have unprocessed
2106  *      descriptors.
2107  */
2108 static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
2109                           unsigned int sleeping)
2110 {
2111         if (sleeping & F_RSPD_TXQ0_GTS) {
2112                 struct sge_txq *txq = &qs->txq[TXQ_ETH];
2113
2114                 if (txq->cleaned + txq->in_use != txq->processed &&
2115                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
2116                         set_bit(TXQ_RUNNING, &txq->flags);
2117                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
2118                                      V_EGRCNTX(txq->cntxt_id));
2119                 }
2120         }
2121
2122         if (sleeping & F_RSPD_TXQ1_GTS) {
2123                 struct sge_txq *txq = &qs->txq[TXQ_OFLD];
2124
2125                 if (txq->cleaned + txq->in_use != txq->processed &&
2126                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
2127                         set_bit(TXQ_RUNNING, &txq->flags);
2128                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
2129                                      V_EGRCNTX(txq->cntxt_id));
2130                 }
2131         }
2132 }
2133
2134 /**
2135  *      is_new_response - check if a response is newly written
2136  *      @r: the response descriptor
2137  *      @q: the response queue
2138  *
2139  *      Returns true if a response descriptor contains a yet unprocessed
2140  *      response.
2141  */
2142 static inline int is_new_response(const struct rsp_desc *r,
2143                                   const struct sge_rspq *q)
2144 {
2145         return (r->intr_gen & F_RSPD_GEN2) == q->gen;
2146 }
2147
2148 static inline void clear_rspq_bufstate(struct sge_rspq * const q)
2149 {
2150         q->pg_skb = NULL;
2151         q->rx_recycle_buf = 0;
2152 }
2153
2154 #define RSPD_GTS_MASK  (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
2155 #define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
2156                         V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
2157                         V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
2158                         V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
2159
2160 /* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
2161 #define NOMEM_INTR_DELAY 2500
2162
2163 /**
2164  *      process_responses - process responses from an SGE response queue
2165  *      @adap: the adapter
2166  *      @qs: the queue set to which the response queue belongs
2167  *      @budget: how many responses can be processed in this round
2168  *
2169  *      Process responses from an SGE response queue up to the supplied budget.
2170  *      Responses include received packets as well as credits and other events
2171  *      for the queues that belong to the response queue's queue set.
2172  *      A negative budget is effectively unlimited.
2173  *
2174  *      Additionally choose the interrupt holdoff time for the next interrupt
2175  *      on this queue.  If the system is under memory shortage use a fairly
2176  *      long delay to help recovery.
2177  */
2178 static int process_responses(struct adapter *adap, struct sge_qset *qs,
2179                              int budget)
2180 {
2181         struct sge_rspq *q = &qs->rspq;
2182         struct rsp_desc *r = &q->desc[q->cidx];
2183         int budget_left = budget;
2184         unsigned int sleeping = 0;
2185         struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
2186         int ngathered = 0;
2187
2188         q->next_holdoff = q->holdoff_tmr;
2189
2190         while (likely(budget_left && is_new_response(r, q))) {
2191                 int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
2192                 struct sk_buff *skb = NULL;
2193                 u32 len, flags = ntohl(r->flags);
2194                 __be32 rss_hi = *(const __be32 *)r,
2195                        rss_lo = r->rss_hdr.rss_hash_val;
2196
2197                 eth = r->rss_hdr.opcode == CPL_RX_PKT;
2198
2199                 if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
2200                         skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
2201                         if (!skb)
2202                                 goto no_mem;
2203
2204                         memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
2205                         skb->data[0] = CPL_ASYNC_NOTIF;
2206                         rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
2207                         q->async_notif++;
2208                 } else if (flags & F_RSPD_IMM_DATA_VALID) {
2209                         skb = get_imm_packet(r);
2210                         if (unlikely(!skb)) {
2211 no_mem:
2212                                 q->next_holdoff = NOMEM_INTR_DELAY;
2213                                 q->nomem++;
2214                                 /* consume one credit since we tried */
2215                                 budget_left--;
2216                                 break;
2217                         }
2218                         q->imm_data++;
2219                         ethpad = 0;
2220                 } else if ((len = ntohl(r->len_cq)) != 0) {
2221                         struct sge_fl *fl;
2222
2223                         lro &= eth && is_eth_tcp(rss_hi);
2224
2225                         fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
2226                         if (fl->use_pages) {
2227                                 void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
2228
2229                                 prefetch(addr);
2230 #if L1_CACHE_BYTES < 128
2231                                 prefetch(addr + L1_CACHE_BYTES);
2232 #endif
2233                                 __refill_fl(adap, fl);
2234                                 if (lro > 0) {
2235                                         lro_add_page(adap, qs, fl,
2236                                                      G_RSPD_LEN(len),
2237                                                      flags & F_RSPD_EOP);
2238                                          goto next_fl;
2239                                 }
2240
2241                                 skb = get_packet_pg(adap, fl, q,
2242                                                     G_RSPD_LEN(len),
2243                                                     eth ?
2244                                                     SGE_RX_DROP_THRES : 0);
2245                                 q->pg_skb = skb;
2246                         } else
2247                                 skb = get_packet(adap, fl, G_RSPD_LEN(len),
2248                                                  eth ? SGE_RX_DROP_THRES : 0);
2249                         if (unlikely(!skb)) {
2250                                 if (!eth)
2251                                         goto no_mem;
2252                                 q->rx_drops++;
2253                         } else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
2254                                 __skb_pull(skb, 2);
2255 next_fl:
2256                         if (++fl->cidx == fl->size)
2257                                 fl->cidx = 0;
2258                 } else
2259                         q->pure_rsps++;
2260
2261                 if (flags & RSPD_CTRL_MASK) {
2262                         sleeping |= flags & RSPD_GTS_MASK;
2263                         handle_rsp_cntrl_info(qs, flags);
2264                 }
2265
2266                 r++;
2267                 if (unlikely(++q->cidx == q->size)) {
2268                         q->cidx = 0;
2269                         q->gen ^= 1;
2270                         r = q->desc;
2271                 }
2272                 prefetch(r);
2273
2274                 if (++q->credits >= (q->size / 4)) {
2275                         refill_rspq(adap, q, q->credits);
2276                         q->credits = 0;
2277                 }
2278
2279                 packet_complete = flags &
2280                                   (F_RSPD_EOP | F_RSPD_IMM_DATA_VALID |
2281                                    F_RSPD_ASYNC_NOTIF);
2282
2283                 if (skb != NULL && packet_complete) {
2284                         if (eth)
2285                                 rx_eth(adap, q, skb, ethpad, lro);
2286                         else {
2287                                 q->offload_pkts++;
2288                                 /* Preserve the RSS info in csum & priority */
2289                                 skb->csum = rss_hi;
2290                                 skb->priority = rss_lo;
2291                                 ngathered = rx_offload(&adap->tdev, q, skb,
2292                                                        offload_skbs,
2293                                                        ngathered);
2294                         }
2295
2296                         if (flags & F_RSPD_EOP)
2297                                 clear_rspq_bufstate(q);
2298                 }
2299                 --budget_left;
2300         }
2301
2302         deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
2303
2304         if (sleeping)
2305                 check_ring_db(adap, qs, sleeping);
2306
2307         smp_mb();               /* commit Tx queue .processed updates */
2308         if (unlikely(qs->txq_stopped != 0))
2309                 restart_tx(qs);
2310
2311         budget -= budget_left;
2312         return budget;
2313 }
2314
2315 static inline int is_pure_response(const struct rsp_desc *r)
2316 {
2317         __be32 n = r->flags & htonl(F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
2318
2319         return (n | r->len_cq) == 0;
2320 }
2321
2322 /**
2323  *      napi_rx_handler - the NAPI handler for Rx processing
2324  *      @napi: the napi instance
2325  *      @budget: how many packets we can process in this round
2326  *
2327  *      Handler for new data events when using NAPI.
2328  */
2329 static int napi_rx_handler(struct napi_struct *napi, int budget)
2330 {
2331         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
2332         struct adapter *adap = qs->adap;
2333         int work_done = process_responses(adap, qs, budget);
2334
2335         if (likely(work_done < budget)) {
2336                 napi_complete(napi);
2337
2338                 /*
2339                  * Because we don't atomically flush the following
2340                  * write it is possible that in very rare cases it can
2341                  * reach the device in a way that races with a new
2342                  * response being written plus an error interrupt
2343                  * causing the NAPI interrupt handler below to return
2344                  * unhandled status to the OS.  To protect against
2345                  * this would require flushing the write and doing
2346                  * both the write and the flush with interrupts off.
2347                  * Way too expensive and unjustifiable given the
2348                  * rarity of the race.
2349                  *
2350                  * The race cannot happen at all with MSI-X.
2351                  */
2352                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
2353                              V_NEWTIMER(qs->rspq.next_holdoff) |
2354                              V_NEWINDEX(qs->rspq.cidx));
2355         }
2356         return work_done;
2357 }
2358
2359 /*
2360  * Returns true if the device is already scheduled for polling.
2361  */
2362 static inline int napi_is_scheduled(struct napi_struct *napi)
2363 {
2364         return test_bit(NAPI_STATE_SCHED, &napi->state);
2365 }
2366
2367 /**
2368  *      process_pure_responses - process pure responses from a response queue
2369  *      @adap: the adapter
2370  *      @qs: the queue set owning the response queue
2371  *      @r: the first pure response to process
2372  *
2373  *      A simpler version of process_responses() that handles only pure (i.e.,
2374  *      non data-carrying) responses.  Such respones are too light-weight to
2375  *      justify calling a softirq under NAPI, so we handle them specially in
2376  *      the interrupt handler.  The function is called with a pointer to a
2377  *      response, which the caller must ensure is a valid pure response.
2378  *
2379  *      Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
2380  */
2381 static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
2382                                   struct rsp_desc *r)
2383 {
2384         struct sge_rspq *q = &qs->rspq;
2385         unsigned int sleeping = 0;
2386
2387         do {
2388                 u32 flags = ntohl(r->flags);
2389
2390                 r++;
2391                 if (unlikely(++q->cidx == q->size)) {
2392                         q->cidx = 0;
2393                         q->gen ^= 1;
2394                         r = q->desc;
2395                 }
2396                 prefetch(r);
2397
2398                 if (flags & RSPD_CTRL_MASK) {
2399                         sleeping |= flags & RSPD_GTS_MASK;
2400                         handle_rsp_cntrl_info(qs, flags);
2401                 }
2402
2403                 q->pure_rsps++;
2404                 if (++q->credits >= (q->size / 4)) {
2405                         refill_rspq(adap, q, q->credits);
2406                         q->credits = 0;
2407                 }
2408         } while (is_new_response(r, q) && is_pure_response(r));
2409
2410         if (sleeping)
2411                 check_ring_db(adap, qs, sleeping);
2412
2413         smp_mb();               /* commit Tx queue .processed updates */
2414         if (unlikely(qs->txq_stopped != 0))
2415                 restart_tx(qs);
2416
2417         return is_new_response(r, q);
2418 }
2419
2420 /**
2421  *      handle_responses - decide what to do with new responses in NAPI mode
2422  *      @adap: the adapter
2423  *      @q: the response queue
2424  *
2425  *      This is used by the NAPI interrupt handlers to decide what to do with
2426  *      new SGE responses.  If there are no new responses it returns -1.  If
2427  *      there are new responses and they are pure (i.e., non-data carrying)
2428  *      it handles them straight in hard interrupt context as they are very
2429  *      cheap and don't deliver any packets.  Finally, if there are any data
2430  *      signaling responses it schedules the NAPI handler.  Returns 1 if it
2431  *      schedules NAPI, 0 if all new responses were pure.
2432  *
2433  *      The caller must ascertain NAPI is not already running.
2434  */
2435 static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
2436 {
2437         struct sge_qset *qs = rspq_to_qset(q);
2438         struct rsp_desc *r = &q->desc[q->cidx];
2439
2440         if (!is_new_response(r, q))
2441                 return -1;
2442         if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
2443                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2444                              V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
2445                 return 0;
2446         }
2447         napi_schedule(&qs->napi);
2448         return 1;
2449 }
2450
2451 /*
2452  * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
2453  * (i.e., response queue serviced in hard interrupt).
2454  */
2455 irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
2456 {
2457         struct sge_qset *qs = cookie;
2458         struct adapter *adap = qs->adap;
2459         struct sge_rspq *q = &qs->rspq;
2460
2461         spin_lock(&q->lock);
2462         if (process_responses(adap, qs, -1) == 0)
2463                 q->unhandled_irqs++;
2464         t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2465                      V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2466         spin_unlock(&q->lock);
2467         return IRQ_HANDLED;
2468 }
2469
2470 /*
2471  * The MSI-X interrupt handler for an SGE response queue for the NAPI case
2472  * (i.e., response queue serviced by NAPI polling).
2473  */
2474 static irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
2475 {
2476         struct sge_qset *qs = cookie;
2477         struct sge_rspq *q = &qs->rspq;
2478
2479         spin_lock(&q->lock);
2480
2481         if (handle_responses(qs->adap, q) < 0)
2482                 q->unhandled_irqs++;
2483         spin_unlock(&q->lock);
2484         return IRQ_HANDLED;
2485 }
2486
2487 /*
2488  * The non-NAPI MSI interrupt handler.  This needs to handle data events from
2489  * SGE response queues as well as error and other async events as they all use
2490  * the same MSI vector.  We use one SGE response queue per port in this mode
2491  * and protect all response queues with queue 0's lock.
2492  */
2493 static irqreturn_t t3_intr_msi(int irq, void *cookie)
2494 {
2495         int new_packets = 0;
2496         struct adapter *adap = cookie;
2497         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2498
2499         spin_lock(&q->lock);
2500
2501         if (process_responses(adap, &adap->sge.qs[0], -1)) {
2502                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2503                              V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2504                 new_packets = 1;
2505         }
2506
2507         if (adap->params.nports == 2 &&
2508             process_responses(adap, &adap->sge.qs[1], -1)) {
2509                 struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2510
2511                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
2512                              V_NEWTIMER(q1->next_holdoff) |
2513                              V_NEWINDEX(q1->cidx));
2514                 new_packets = 1;
2515         }
2516
2517         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2518                 q->unhandled_irqs++;
2519
2520         spin_unlock(&q->lock);
2521         return IRQ_HANDLED;
2522 }
2523
2524 static int rspq_check_napi(struct sge_qset *qs)
2525 {
2526         struct sge_rspq *q = &qs->rspq;
2527
2528         if (!napi_is_scheduled(&qs->napi) &&
2529             is_new_response(&q->desc[q->cidx], q)) {
2530                 napi_schedule(&qs->napi);
2531                 return 1;
2532         }
2533         return 0;
2534 }
2535
2536 /*
2537  * The MSI interrupt handler for the NAPI case (i.e., response queues serviced
2538  * by NAPI polling).  Handles data events from SGE response queues as well as
2539  * error and other async events as they all use the same MSI vector.  We use
2540  * one SGE response queue per port in this mode and protect all response
2541  * queues with queue 0's lock.
2542  */
2543 static irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
2544 {
2545         int new_packets;
2546         struct adapter *adap = cookie;
2547         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2548
2549         spin_lock(&q->lock);
2550
2551         new_packets = rspq_check_napi(&adap->sge.qs[0]);
2552         if (adap->params.nports == 2)
2553                 new_packets += rspq_check_napi(&adap->sge.qs[1]);
2554         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2555                 q->unhandled_irqs++;
2556
2557         spin_unlock(&q->lock);
2558         return IRQ_HANDLED;
2559 }
2560
2561 /*
2562  * A helper function that processes responses and issues GTS.
2563  */
2564 static inline int process_responses_gts(struct adapter *adap,
2565                                         struct sge_rspq *rq)
2566 {
2567         int work;
2568
2569         work = process_responses(adap, rspq_to_qset(rq), -1);
2570         t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
2571                      V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
2572         return work;
2573 }
2574
2575 /*
2576  * The legacy INTx interrupt handler.  This needs to handle data events from
2577  * SGE response queues as well as error and other async events as they all use
2578  * the same interrupt pin.  We use one SGE response queue per port in this mode
2579  * and protect all response queues with queue 0's lock.
2580  */
2581 static irqreturn_t t3_intr(int irq, void *cookie)
2582 {
2583         int work_done, w0, w1;
2584         struct adapter *adap = cookie;
2585         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2586         struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2587
2588         spin_lock(&q0->lock);
2589
2590         w0 = is_new_response(&q0->desc[q0->cidx], q0);
2591         w1 = adap->params.nports == 2 &&
2592             is_new_response(&q1->desc[q1->cidx], q1);
2593
2594         if (likely(w0 | w1)) {
2595                 t3_write_reg(adap, A_PL_CLI, 0);
2596                 t3_read_reg(adap, A_PL_CLI);    /* flush */
2597
2598                 if (likely(w0))
2599                         process_responses_gts(adap, q0);
2600
2601                 if (w1)
2602                         process_responses_gts(adap, q1);
2603
2604                 work_done = w0 | w1;
2605         } else
2606                 work_done = t3_slow_intr_handler(adap);
2607
2608         spin_unlock(&q0->lock);
2609         return IRQ_RETVAL(work_done != 0);
2610 }
2611
2612 /*
2613  * Interrupt handler for legacy INTx interrupts for T3B-based cards.
2614  * Handles data events from SGE response queues as well as error and other
2615  * async events as they all use the same interrupt pin.  We use one SGE
2616  * response queue per port in this mode and protect all response queues with
2617  * queue 0's lock.
2618  */
2619 static irqreturn_t t3b_intr(int irq, void *cookie)
2620 {
2621         u32 map;
2622         struct adapter *adap = cookie;
2623         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2624
2625         t3_write_reg(adap, A_PL_CLI, 0);
2626         map = t3_read_reg(adap, A_SG_DATA_INTR);
2627
2628         if (unlikely(!map))     /* shared interrupt, most likely */
2629                 return IRQ_NONE;
2630
2631         spin_lock(&q0->lock);
2632
2633         if (unlikely(map & F_ERRINTR))
2634                 t3_slow_intr_handler(adap);
2635
2636         if (likely(map & 1))
2637                 process_responses_gts(adap, q0);
2638
2639         if (map & 2)
2640                 process_responses_gts(adap, &adap->sge.qs[1].rspq);
2641
2642         spin_unlock(&q0->lock);
2643         return IRQ_HANDLED;
2644 }
2645
2646 /*
2647  * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
2648  * Handles data events from SGE response queues as well as error and other
2649  * async events as they all use the same interrupt pin.  We use one SGE
2650  * response queue per port in this mode and protect all response queues with
2651  * queue 0's lock.
2652  */
2653 static irqreturn_t t3b_intr_napi(int irq, void *cookie)
2654 {
2655         u32 map;
2656         struct adapter *adap = cookie;
2657         struct sge_qset *qs0 = &adap->sge.qs[0];
2658         struct sge_rspq *q0 = &qs0->rspq;
2659
2660         t3_write_reg(adap, A_PL_CLI, 0);
2661         map = t3_read_reg(adap, A_SG_DATA_INTR);
2662
2663         if (unlikely(!map))     /* shared interrupt, most likely */
2664                 return IRQ_NONE;
2665
2666         spin_lock(&q0->lock);
2667
2668         if (unlikely(map & F_ERRINTR))
2669                 t3_slow_intr_handler(adap);
2670
2671         if (likely(map & 1))
2672                 napi_schedule(&qs0->napi);
2673
2674         if (map & 2)
2675                 napi_schedule(&adap->sge.qs[1].napi);
2676
2677         spin_unlock(&q0->lock);
2678         return IRQ_HANDLED;
2679 }
2680
2681 /**
2682  *      t3_intr_handler - select the top-level interrupt handler
2683  *      @adap: the adapter
2684  *      @polling: whether using NAPI to service response queues
2685  *
2686  *      Selects the top-level interrupt handler based on the type of interrupts
2687  *      (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
2688  *      response queues.
2689  */
2690 irq_handler_t t3_intr_handler(struct adapter *adap, int polling)
2691 {
2692         if (adap->flags & USING_MSIX)
2693                 return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
2694         if (adap->flags & USING_MSI)
2695                 return polling ? t3_intr_msi_napi : t3_intr_msi;
2696         if (adap->params.rev > 0)
2697                 return polling ? t3b_intr_napi : t3b_intr;
2698         return t3_intr;
2699 }
2700
2701 #define SGE_PARERR (F_CPPARITYERROR | F_OCPARITYERROR | F_RCPARITYERROR | \
2702                     F_IRPARITYERROR | V_ITPARITYERROR(M_ITPARITYERROR) | \
2703                     V_FLPARITYERROR(M_FLPARITYERROR) | F_LODRBPARITYERROR | \
2704                     F_HIDRBPARITYERROR | F_LORCQPARITYERROR | \
2705                     F_HIRCQPARITYERROR)
2706 #define SGE_FRAMINGERR (F_UC_REQ_FRAMINGERROR | F_R_REQ_FRAMINGERROR)
2707 #define SGE_FATALERR (SGE_PARERR | SGE_FRAMINGERR | F_RSPQCREDITOVERFOW | \
2708                       F_RSPQDISABLED)
2709
2710 /**
2711  *      t3_sge_err_intr_handler - SGE async event interrupt handler
2712  *      @adapter: the adapter
2713  *
2714  *      Interrupt handler for SGE asynchronous (non-data) events.
2715  */
2716 void t3_sge_err_intr_handler(struct adapter *adapter)
2717 {
2718         unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE);
2719
2720         if (status & SGE_PARERR)
2721                 CH_ALERT(adapter, "SGE parity error (0x%x)\n",
2722                          status & SGE_PARERR);
2723         if (status & SGE_FRAMINGERR)
2724                 CH_ALERT(adapter, "SGE framing error (0x%x)\n",
2725                          status & SGE_FRAMINGERR);
2726
2727         if (status & F_RSPQCREDITOVERFOW)
2728                 CH_ALERT(adapter, "SGE response queue credit overflow\n");
2729
2730         if (status & F_RSPQDISABLED) {
2731                 v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
2732
2733                 CH_ALERT(adapter,
2734                          "packet delivered to disabled response queue "
2735                          "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
2736         }
2737
2738         if (status & (F_HIPIODRBDROPERR | F_LOPIODRBDROPERR))
2739                 CH_ALERT(adapter, "SGE dropped %s priority doorbell\n",
2740                          status & F_HIPIODRBDROPERR ? "high" : "lo");
2741
2742         t3_write_reg(adapter, A_SG_INT_CAUSE, status);
2743         if (status &  SGE_FATALERR)
2744                 t3_fatal_err(adapter);
2745 }
2746
2747 /**
2748  *      sge_timer_cb - perform periodic maintenance of an SGE qset
2749  *      @data: the SGE queue set to maintain
2750  *
2751  *      Runs periodically from a timer to perform maintenance of an SGE queue
2752  *      set.  It performs two tasks:
2753  *
2754  *      a) Cleans up any completed Tx descriptors that may still be pending.
2755  *      Normal descriptor cleanup happens when new packets are added to a Tx
2756  *      queue so this timer is relatively infrequent and does any cleanup only
2757  *      if the Tx queue has not seen any new packets in a while.  We make a
2758  *      best effort attempt to reclaim descriptors, in that we don't wait
2759  *      around if we cannot get a queue's lock (which most likely is because
2760  *      someone else is queueing new packets and so will also handle the clean
2761  *      up).  Since control queues use immediate data exclusively we don't
2762  *      bother cleaning them up here.
2763  *
2764  *      b) Replenishes Rx queues that have run out due to memory shortage.
2765  *      Normally new Rx buffers are added when existing ones are consumed but
2766  *      when out of memory a queue can become empty.  We try to add only a few
2767  *      buffers here, the queue will be replenished fully as these new buffers
2768  *      are used up if memory shortage has subsided.
2769  */
2770 static void sge_timer_cb(unsigned long data)
2771 {
2772         spinlock_t *lock;
2773         struct sge_qset *qs = (struct sge_qset *)data;
2774         struct adapter *adap = qs->adap;
2775
2776         if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
2777                 reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]);
2778                 spin_unlock(&qs->txq[TXQ_ETH].lock);
2779         }
2780         if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
2781                 reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]);
2782                 spin_unlock(&qs->txq[TXQ_OFLD].lock);
2783         }
2784         lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock :
2785                                             &adap->sge.qs[0].rspq.lock;
2786         if (spin_trylock_irq(lock)) {
2787                 if (!napi_is_scheduled(&qs->napi)) {
2788                         u32 status = t3_read_reg(adap, A_SG_RSPQ_FL_STATUS);
2789
2790                         if (qs->fl[0].credits < qs->fl[0].size)
2791                                 __refill_fl(adap, &qs->fl[0]);
2792                         if (qs->fl[1].credits < qs->fl[1].size)
2793                                 __refill_fl(adap, &qs->fl[1]);
2794
2795                         if (status & (1 << qs->rspq.cntxt_id)) {
2796                                 qs->rspq.starved++;
2797                                 if (qs->rspq.credits) {
2798                                         refill_rspq(adap, &qs->rspq, 1);
2799                                         qs->rspq.credits--;
2800                                         qs->rspq.restarted++;
2801                                         t3_write_reg(adap, A_SG_RSPQ_FL_STATUS,
2802                                                      1 << qs->rspq.cntxt_id);
2803                                 }
2804                         }
2805                 }
2806                 spin_unlock_irq(lock);
2807         }
2808         mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
2809 }
2810
2811 /**
2812  *      t3_update_qset_coalesce - update coalescing settings for a queue set
2813  *      @qs: the SGE queue set
2814  *      @p: new queue set parameters
2815  *
2816  *      Update the coalescing settings for an SGE queue set.  Nothing is done
2817  *      if the queue set is not initialized yet.
2818  */
2819 void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
2820 {
2821         qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
2822         qs->rspq.polling = p->polling;
2823         qs->napi.poll = p->polling ? napi_rx_handler : ofld_poll;
2824 }
2825
2826 /**
2827  *      t3_sge_alloc_qset - initialize an SGE queue set
2828  *      @adapter: the adapter
2829  *      @id: the queue set id
2830  *      @nports: how many Ethernet ports will be using this queue set
2831  *      @irq_vec_idx: the IRQ vector index for response queue interrupts
2832  *      @p: configuration parameters for this queue set
2833  *      @ntxq: number of Tx queues for the queue set
2834  *      @netdev: net device associated with this queue set
2835  *      @netdevq: net device TX queue associated with this queue set
2836  *
2837  *      Allocate resources and initialize an SGE queue set.  A queue set
2838  *      comprises a response queue, two Rx free-buffer queues, and up to 3
2839  *      Tx queues.  The Tx queues are assigned roles in the order Ethernet
2840  *      queue, offload queue, and control queue.
2841  */
2842 int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
2843                       int irq_vec_idx, const struct qset_params *p,
2844                       int ntxq, struct net_device *dev,
2845                       struct netdev_queue *netdevq)
2846 {
2847         int i, avail, ret = -ENOMEM;
2848         struct sge_qset *q = &adapter->sge.qs[id];
2849
2850         init_qset_cntxt(q, id);
2851         setup_timer(&q->tx_reclaim_timer, sge_timer_cb, (unsigned long)q);
2852
2853         q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
2854                                    sizeof(struct rx_desc),
2855                                    sizeof(struct rx_sw_desc),
2856                                    &q->fl[0].phys_addr, &q->fl[0].sdesc);
2857         if (!q->fl[0].desc)
2858                 goto err;
2859
2860         q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
2861                                    sizeof(struct rx_desc),
2862                                    sizeof(struct rx_sw_desc),
2863                                    &q->fl[1].phys_addr, &q->fl[1].sdesc);
2864         if (!q->fl[1].desc)
2865                 goto err;
2866
2867         q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
2868                                   sizeof(struct rsp_desc), 0,
2869                                   &q->rspq.phys_addr, NULL);
2870         if (!q->rspq.desc)
2871                 goto err;
2872
2873         for (i = 0; i < ntxq; ++i) {
2874                 /*
2875                  * The control queue always uses immediate data so does not
2876                  * need to keep track of any sk_buffs.
2877                  */
2878                 size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
2879
2880                 q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
2881                                             sizeof(struct tx_desc), sz,
2882                                             &q->txq[i].phys_addr,
2883                                             &q->txq[i].sdesc);
2884                 if (!q->txq[i].desc)
2885                         goto err;
2886
2887                 q->txq[i].gen = 1;
2888                 q->txq[i].size = p->txq_size[i];
2889                 spin_lock_init(&q->txq[i].lock);
2890                 skb_queue_head_init(&q->txq[i].sendq);
2891         }
2892
2893         tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
2894                      (unsigned long)q);
2895         tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
2896                      (unsigned long)q);
2897
2898         q->fl[0].gen = q->fl[1].gen = 1;
2899         q->fl[0].size = p->fl_size;
2900         q->fl[1].size = p->jumbo_size;
2901
2902         q->rspq.gen = 1;
2903         q->rspq.size = p->rspq_size;
2904         spin_lock_init(&q->rspq.lock);
2905         skb_queue_head_init(&q->rspq.rx_queue);
2906
2907         q->txq[TXQ_ETH].stop_thres = nports *
2908             flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
2909
2910 #if FL0_PG_CHUNK_SIZE > 0
2911         q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
2912 #else
2913         q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
2914 #endif
2915 #if FL1_PG_CHUNK_SIZE > 0
2916         q->fl[1].buf_size = FL1_PG_CHUNK_SIZE;
2917 #else
2918         q->fl[1].buf_size = is_offload(adapter) ?
2919                 (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
2920                 MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
2921 #endif
2922
2923         q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
2924         q->fl[1].use_pages = FL1_PG_CHUNK_SIZE > 0;
2925         q->fl[0].order = FL0_PG_ORDER;
2926         q->fl[1].order = FL1_PG_ORDER;
2927
2928         spin_lock_irq(&adapter->sge.reg_lock);
2929
2930         /* FL threshold comparison uses < */
2931         ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
2932                                    q->rspq.phys_addr, q->rspq.size,
2933                                    q->fl[0].buf_size, 1, 0);
2934         if (ret)
2935                 goto err_unlock;
2936
2937         for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
2938                 ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
2939                                           q->fl[i].phys_addr, q->fl[i].size,
2940                                           q->fl[i].buf_size, p->cong_thres, 1,
2941                                           0);
2942                 if (ret)
2943                         goto err_unlock;
2944         }
2945
2946         ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
2947                                  SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
2948                                  q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
2949                                  1, 0);
2950         if (ret)
2951                 goto err_unlock;
2952
2953         if (ntxq > 1) {
2954                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
2955                                          USE_GTS, SGE_CNTXT_OFLD, id,
2956                                          q->txq[TXQ_OFLD].phys_addr,
2957                                          q->txq[TXQ_OFLD].size, 0, 1, 0);
2958                 if (ret)
2959                         goto err_unlock;
2960         }
2961
2962         if (ntxq > 2) {
2963                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
2964                                          SGE_CNTXT_CTRL, id,
2965                                          q->txq[TXQ_CTRL].phys_addr,
2966                                          q->txq[TXQ_CTRL].size,
2967                                          q->txq[TXQ_CTRL].token, 1, 0);
2968                 if (ret)
2969                         goto err_unlock;
2970         }
2971
2972         spin_unlock_irq(&adapter->sge.reg_lock);
2973
2974         q->adap = adapter;
2975         q->netdev = dev;
2976         q->tx_q = netdevq;
2977         t3_update_qset_coalesce(q, p);
2978
2979         avail = refill_fl(adapter, &q->fl[0], q->fl[0].size,
2980                           GFP_KERNEL | __GFP_COMP);
2981         if (!avail) {
2982                 CH_ALERT(adapter, "free list queue 0 initialization failed\n");
2983                 goto err;
2984         }
2985         if (avail < q->fl[0].size)
2986                 CH_WARN(adapter, "free list queue 0 enabled with %d credits\n",
2987                         avail);
2988
2989         avail = refill_fl(adapter, &q->fl[1], q->fl[1].size,
2990                           GFP_KERNEL | __GFP_COMP);
2991         if (avail < q->fl[1].size)
2992                 CH_WARN(adapter, "free list queue 1 enabled with %d credits\n",
2993                         avail);
2994         refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
2995
2996         t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
2997                      V_NEWTIMER(q->rspq.holdoff_tmr));
2998
2999         mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
3000         return 0;
3001
3002 err_unlock:
3003         spin_unlock_irq(&adapter->sge.reg_lock);
3004 err:
3005         t3_free_qset(adapter, q);
3006         return ret;
3007 }
3008
3009 /**
3010  *      t3_stop_sge_timers - stop SGE timer call backs
3011  *      @adap: the adapter
3012  *
3013  *      Stops each SGE queue set's timer call back
3014  */
3015 void t3_stop_sge_timers(struct adapter *adap)
3016 {
3017         int i;
3018
3019         for (i = 0; i < SGE_QSETS; ++i) {
3020                 struct sge_qset *q = &adap->sge.qs[i];
3021
3022                 if (q->tx_reclaim_timer.function)
3023                         del_timer_sync(&q->tx_reclaim_timer);
3024         }
3025 }
3026
3027 /**
3028  *      t3_free_sge_resources - free SGE resources
3029  *      @adap: the adapter
3030  *
3031  *      Frees resources used by the SGE queue sets.
3032  */
3033 void t3_free_sge_resources(struct adapter *adap)
3034 {
3035         int i;
3036
3037         for (i = 0; i < SGE_QSETS; ++i)
3038                 t3_free_qset(adap, &adap->sge.qs[i]);
3039 }
3040
3041 /**
3042  *      t3_sge_start - enable SGE
3043  *      @adap: the adapter
3044  *
3045  *      Enables the SGE for DMAs.  This is the last step in starting packet
3046  *      transfers.
3047  */
3048 void t3_sge_start(struct adapter *adap)
3049 {
3050         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
3051 }
3052
3053 /**
3054  *      t3_sge_stop - disable SGE operation
3055  *      @adap: the adapter
3056  *
3057  *      Disables the DMA engine.  This can be called in emeregencies (e.g.,
3058  *      from error interrupts) or from normal process context.  In the latter
3059  *      case it also disables any pending queue restart tasklets.  Note that
3060  *      if it is called in interrupt context it cannot disable the restart
3061  *      tasklets as it cannot wait, however the tasklets will have no effect
3062  *      since the doorbells are disabled and the driver will call this again
3063  *      later from process context, at which time the tasklets will be stopped
3064  *      if they are still running.
3065  */
3066 void t3_sge_stop(struct adapter *adap)
3067 {
3068         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
3069         if (!in_interrupt()) {
3070                 int i;
3071
3072                 for (i = 0; i < SGE_QSETS; ++i) {
3073                         struct sge_qset *qs = &adap->sge.qs[i];
3074
3075                         tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
3076                         tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
3077                 }
3078         }
3079 }
3080
3081 /**
3082  *      t3_sge_init - initialize SGE
3083  *      @adap: the adapter
3084  *      @p: the SGE parameters
3085  *
3086  *      Performs SGE initialization needed every time after a chip reset.
3087  *      We do not initialize any of the queue sets here, instead the driver
3088  *      top-level must request those individually.  We also do not enable DMA
3089  *      here, that should be done after the queues have been set up.
3090  */
3091 void t3_sge_init(struct adapter *adap, struct sge_params *p)
3092 {
3093         unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
3094
3095         ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
3096             F_CQCRDTCTRL | F_CONGMODE | F_TNLFLMODE | F_FATLPERREN |
3097             V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
3098             V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
3099 #if SGE_NUM_GENBITS == 1
3100         ctrl |= F_EGRGENCTRL;
3101 #endif
3102         if (adap->params.rev > 0) {
3103                 if (!(adap->flags & (USING_MSIX | USING_MSI)))
3104                         ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
3105         }
3106         t3_write_reg(adap, A_SG_CONTROL, ctrl);
3107         t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
3108                      V_LORCQDRBTHRSH(512));
3109         t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
3110         t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
3111                      V_TIMEOUT(200 * core_ticks_per_usec(adap)));
3112         t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH,
3113                      adap->params.rev < T3_REV_C ? 1000 : 500);
3114         t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
3115         t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
3116         t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
3117         t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
3118         t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
3119 }
3120
3121 /**
3122  *      t3_sge_prep - one-time SGE initialization
3123  *      @adap: the associated adapter
3124  *      @p: SGE parameters
3125  *
3126  *      Performs one-time initialization of SGE SW state.  Includes determining
3127  *      defaults for the assorted SGE parameters, which admins can change until
3128  *      they are used to initialize the SGE.
3129  */
3130 void t3_sge_prep(struct adapter *adap, struct sge_params *p)
3131 {
3132         int i;
3133
3134         p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
3135             SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
3136
3137         for (i = 0; i < SGE_QSETS; ++i) {
3138                 struct qset_params *q = p->qset + i;
3139
3140                 q->polling = adap->params.rev > 0;
3141                 q->coalesce_usecs = 5;
3142                 q->rspq_size = 1024;
3143                 q->fl_size = 1024;
3144                 q->jumbo_size = 512;
3145                 q->txq_size[TXQ_ETH] = 1024;
3146                 q->txq_size[TXQ_OFLD] = 1024;
3147                 q->txq_size[TXQ_CTRL] = 256;
3148                 q->cong_thres = 0;
3149         }
3150
3151         spin_lock_init(&adap->sge.reg_lock);
3152 }
3153
3154 /**
3155  *      t3_get_desc - dump an SGE descriptor for debugging purposes
3156  *      @qs: the queue set
3157  *      @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
3158  *      @idx: the descriptor index in the queue
3159  *      @data: where to dump the descriptor contents
3160  *
3161  *      Dumps the contents of a HW descriptor of an SGE queue.  Returns the
3162  *      size of the descriptor.
3163  */
3164 int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
3165                 unsigned char *data)
3166 {
3167         if (qnum >= 6)
3168                 return -EINVAL;
3169
3170         if (qnum < 3) {
3171                 if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
3172                         return -EINVAL;
3173                 memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
3174                 return sizeof(struct tx_desc);
3175         }
3176
3177         if (qnum == 3) {
3178                 if (!qs->rspq.desc || idx >= qs->rspq.size)
3179                         return -EINVAL;
3180                 memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
3181                 return sizeof(struct rsp_desc);
3182         }
3183
3184         qnum -= 4;
3185         if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
3186                 return -EINVAL;
3187         memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
3188         return sizeof(struct rx_desc);
3189 }