Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[safe/jmp/linux-2.6] / drivers / net / cxgb3 / sge.c
1 /*
2  * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  */
32 #include <linux/skbuff.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/if_vlan.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/dma-mapping.h>
39 #include <net/arp.h>
40 #include "common.h"
41 #include "regs.h"
42 #include "sge_defs.h"
43 #include "t3_cpl.h"
44 #include "firmware_exports.h"
45
46 #define USE_GTS 0
47
48 #define SGE_RX_SM_BUF_SIZE 1536
49
50 #define SGE_RX_COPY_THRES  256
51 #define SGE_RX_PULL_LEN    128
52
53 #define SGE_PG_RSVD SMP_CACHE_BYTES
54 /*
55  * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
56  * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
57  * directly.
58  */
59 #define FL0_PG_CHUNK_SIZE  2048
60 #define FL0_PG_ORDER 0
61 #define FL0_PG_ALLOC_SIZE (PAGE_SIZE << FL0_PG_ORDER)
62 #define FL1_PG_CHUNK_SIZE (PAGE_SIZE > 8192 ? 16384 : 8192)
63 #define FL1_PG_ORDER (PAGE_SIZE > 8192 ? 0 : 1)
64 #define FL1_PG_ALLOC_SIZE (PAGE_SIZE << FL1_PG_ORDER)
65
66 #define SGE_RX_DROP_THRES 16
67 #define RX_RECLAIM_PERIOD (HZ/4)
68
69 /*
70  * Max number of Rx buffers we replenish at a time.
71  */
72 #define MAX_RX_REFILL 16U
73 /*
74  * Period of the Tx buffer reclaim timer.  This timer does not need to run
75  * frequently as Tx buffers are usually reclaimed by new Tx packets.
76  */
77 #define TX_RECLAIM_PERIOD (HZ / 4)
78 #define TX_RECLAIM_TIMER_CHUNK 64U
79 #define TX_RECLAIM_CHUNK 16U
80
81 /* WR size in bytes */
82 #define WR_LEN (WR_FLITS * 8)
83
84 /*
85  * Types of Tx queues in each queue set.  Order here matters, do not change.
86  */
87 enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
88
89 /* Values for sge_txq.flags */
90 enum {
91         TXQ_RUNNING = 1 << 0,   /* fetch engine is running */
92         TXQ_LAST_PKT_DB = 1 << 1,       /* last packet rang the doorbell */
93 };
94
95 struct tx_desc {
96         __be64 flit[TX_DESC_FLITS];
97 };
98
99 struct rx_desc {
100         __be32 addr_lo;
101         __be32 len_gen;
102         __be32 gen2;
103         __be32 addr_hi;
104 };
105
106 struct tx_sw_desc {             /* SW state per Tx descriptor */
107         struct sk_buff *skb;
108         u8 eop;       /* set if last descriptor for packet */
109         u8 addr_idx;  /* buffer index of first SGL entry in descriptor */
110         u8 fragidx;   /* first page fragment associated with descriptor */
111         s8 sflit;     /* start flit of first SGL entry in descriptor */
112 };
113
114 struct rx_sw_desc {                /* SW state per Rx descriptor */
115         union {
116                 struct sk_buff *skb;
117                 struct fl_pg_chunk pg_chunk;
118         };
119         DECLARE_PCI_UNMAP_ADDR(dma_addr);
120 };
121
122 struct rsp_desc {               /* response queue descriptor */
123         struct rss_header rss_hdr;
124         __be32 flags;
125         __be32 len_cq;
126         u8 imm_data[47];
127         u8 intr_gen;
128 };
129
130 /*
131  * Holds unmapping information for Tx packets that need deferred unmapping.
132  * This structure lives at skb->head and must be allocated by callers.
133  */
134 struct deferred_unmap_info {
135         struct pci_dev *pdev;
136         dma_addr_t addr[MAX_SKB_FRAGS + 1];
137 };
138
139 /*
140  * Maps a number of flits to the number of Tx descriptors that can hold them.
141  * The formula is
142  *
143  * desc = 1 + (flits - 2) / (WR_FLITS - 1).
144  *
145  * HW allows up to 4 descriptors to be combined into a WR.
146  */
147 static u8 flit_desc_map[] = {
148         0,
149 #if SGE_NUM_GENBITS == 1
150         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
151         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
152         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
153         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
154 #elif SGE_NUM_GENBITS == 2
155         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
156         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
157         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
158         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
159 #else
160 # error "SGE_NUM_GENBITS must be 1 or 2"
161 #endif
162 };
163
164 static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
165 {
166         return container_of(q, struct sge_qset, fl[qidx]);
167 }
168
169 static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
170 {
171         return container_of(q, struct sge_qset, rspq);
172 }
173
174 static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
175 {
176         return container_of(q, struct sge_qset, txq[qidx]);
177 }
178
179 /**
180  *      refill_rspq - replenish an SGE response queue
181  *      @adapter: the adapter
182  *      @q: the response queue to replenish
183  *      @credits: how many new responses to make available
184  *
185  *      Replenishes a response queue by making the supplied number of responses
186  *      available to HW.
187  */
188 static inline void refill_rspq(struct adapter *adapter,
189                                const struct sge_rspq *q, unsigned int credits)
190 {
191         rmb();
192         t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
193                      V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
194 }
195
196 /**
197  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
198  *
199  *      Returns true if the platfrom needs sk_buff unmapping.  The compiler
200  *      optimizes away unecessary code if this returns true.
201  */
202 static inline int need_skb_unmap(void)
203 {
204         /*
205          * This structure is used to tell if the platfrom needs buffer
206          * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
207          */
208         struct dummy {
209                 DECLARE_PCI_UNMAP_ADDR(addr);
210         };
211
212         return sizeof(struct dummy) != 0;
213 }
214
215 /**
216  *      unmap_skb - unmap a packet main body and its page fragments
217  *      @skb: the packet
218  *      @q: the Tx queue containing Tx descriptors for the packet
219  *      @cidx: index of Tx descriptor
220  *      @pdev: the PCI device
221  *
222  *      Unmap the main body of an sk_buff and its page fragments, if any.
223  *      Because of the fairly complicated structure of our SGLs and the desire
224  *      to conserve space for metadata, the information necessary to unmap an
225  *      sk_buff is spread across the sk_buff itself (buffer lengths), the HW Tx
226  *      descriptors (the physical addresses of the various data buffers), and
227  *      the SW descriptor state (assorted indices).  The send functions
228  *      initialize the indices for the first packet descriptor so we can unmap
229  *      the buffers held in the first Tx descriptor here, and we have enough
230  *      information at this point to set the state for the next Tx descriptor.
231  *
232  *      Note that it is possible to clean up the first descriptor of a packet
233  *      before the send routines have written the next descriptors, but this
234  *      race does not cause any problem.  We just end up writing the unmapping
235  *      info for the descriptor first.
236  */
237 static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
238                              unsigned int cidx, struct pci_dev *pdev)
239 {
240         const struct sg_ent *sgp;
241         struct tx_sw_desc *d = &q->sdesc[cidx];
242         int nfrags, frag_idx, curflit, j = d->addr_idx;
243
244         sgp = (struct sg_ent *)&q->desc[cidx].flit[d->sflit];
245         frag_idx = d->fragidx;
246
247         if (frag_idx == 0 && skb_headlen(skb)) {
248                 pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]),
249                                  skb_headlen(skb), PCI_DMA_TODEVICE);
250                 j = 1;
251         }
252
253         curflit = d->sflit + 1 + j;
254         nfrags = skb_shinfo(skb)->nr_frags;
255
256         while (frag_idx < nfrags && curflit < WR_FLITS) {
257                 pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
258                                skb_shinfo(skb)->frags[frag_idx].size,
259                                PCI_DMA_TODEVICE);
260                 j ^= 1;
261                 if (j == 0) {
262                         sgp++;
263                         curflit++;
264                 }
265                 curflit++;
266                 frag_idx++;
267         }
268
269         if (frag_idx < nfrags) {   /* SGL continues into next Tx descriptor */
270                 d = cidx + 1 == q->size ? q->sdesc : d + 1;
271                 d->fragidx = frag_idx;
272                 d->addr_idx = j;
273                 d->sflit = curflit - WR_FLITS - j; /* sflit can be -1 */
274         }
275 }
276
277 /**
278  *      free_tx_desc - reclaims Tx descriptors and their buffers
279  *      @adapter: the adapter
280  *      @q: the Tx queue to reclaim descriptors from
281  *      @n: the number of descriptors to reclaim
282  *
283  *      Reclaims Tx descriptors from an SGE Tx queue and frees the associated
284  *      Tx buffers.  Called with the Tx queue lock held.
285  */
286 static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
287                          unsigned int n)
288 {
289         struct tx_sw_desc *d;
290         struct pci_dev *pdev = adapter->pdev;
291         unsigned int cidx = q->cidx;
292
293         const int need_unmap = need_skb_unmap() &&
294                                q->cntxt_id >= FW_TUNNEL_SGEEC_START;
295
296         d = &q->sdesc[cidx];
297         while (n--) {
298                 if (d->skb) {   /* an SGL is present */
299                         if (need_unmap)
300                                 unmap_skb(d->skb, q, cidx, pdev);
301                         if (d->eop)
302                                 kfree_skb(d->skb);
303                 }
304                 ++d;
305                 if (++cidx == q->size) {
306                         cidx = 0;
307                         d = q->sdesc;
308                 }
309         }
310         q->cidx = cidx;
311 }
312
313 /**
314  *      reclaim_completed_tx - reclaims completed Tx descriptors
315  *      @adapter: the adapter
316  *      @q: the Tx queue to reclaim completed descriptors from
317  *      @chunk: maximum number of descriptors to reclaim
318  *
319  *      Reclaims Tx descriptors that the SGE has indicated it has processed,
320  *      and frees the associated buffers if possible.  Called with the Tx
321  *      queue's lock held.
322  */
323 static inline unsigned int reclaim_completed_tx(struct adapter *adapter,
324                                                 struct sge_txq *q,
325                                                 unsigned int chunk)
326 {
327         unsigned int reclaim = q->processed - q->cleaned;
328
329         reclaim = min(chunk, reclaim);
330         if (reclaim) {
331                 free_tx_desc(adapter, q, reclaim);
332                 q->cleaned += reclaim;
333                 q->in_use -= reclaim;
334         }
335         return q->processed - q->cleaned;
336 }
337
338 /**
339  *      should_restart_tx - are there enough resources to restart a Tx queue?
340  *      @q: the Tx queue
341  *
342  *      Checks if there are enough descriptors to restart a suspended Tx queue.
343  */
344 static inline int should_restart_tx(const struct sge_txq *q)
345 {
346         unsigned int r = q->processed - q->cleaned;
347
348         return q->in_use - r < (q->size >> 1);
349 }
350
351 static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q,
352                           struct rx_sw_desc *d)
353 {
354         if (q->use_pages && d->pg_chunk.page) {
355                 (*d->pg_chunk.p_cnt)--;
356                 if (!*d->pg_chunk.p_cnt)
357                         pci_unmap_page(pdev,
358                                        d->pg_chunk.mapping,
359                                        q->alloc_size, PCI_DMA_FROMDEVICE);
360
361                 put_page(d->pg_chunk.page);
362                 d->pg_chunk.page = NULL;
363         } else {
364                 pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
365                                  q->buf_size, PCI_DMA_FROMDEVICE);
366                 kfree_skb(d->skb);
367                 d->skb = NULL;
368         }
369 }
370
371 /**
372  *      free_rx_bufs - free the Rx buffers on an SGE free list
373  *      @pdev: the PCI device associated with the adapter
374  *      @rxq: the SGE free list to clean up
375  *
376  *      Release the buffers on an SGE free-buffer Rx queue.  HW fetching from
377  *      this queue should be stopped before calling this function.
378  */
379 static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
380 {
381         unsigned int cidx = q->cidx;
382
383         while (q->credits--) {
384                 struct rx_sw_desc *d = &q->sdesc[cidx];
385
386
387                 clear_rx_desc(pdev, q, d);
388                 if (++cidx == q->size)
389                         cidx = 0;
390         }
391
392         if (q->pg_chunk.page) {
393                 __free_pages(q->pg_chunk.page, q->order);
394                 q->pg_chunk.page = NULL;
395         }
396 }
397
398 /**
399  *      add_one_rx_buf - add a packet buffer to a free-buffer list
400  *      @va:  buffer start VA
401  *      @len: the buffer length
402  *      @d: the HW Rx descriptor to write
403  *      @sd: the SW Rx descriptor to write
404  *      @gen: the generation bit value
405  *      @pdev: the PCI device associated with the adapter
406  *
407  *      Add a buffer of the given length to the supplied HW and SW Rx
408  *      descriptors.
409  */
410 static inline int add_one_rx_buf(void *va, unsigned int len,
411                                  struct rx_desc *d, struct rx_sw_desc *sd,
412                                  unsigned int gen, struct pci_dev *pdev)
413 {
414         dma_addr_t mapping;
415
416         mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
417         if (unlikely(pci_dma_mapping_error(pdev, mapping)))
418                 return -ENOMEM;
419
420         pci_unmap_addr_set(sd, dma_addr, mapping);
421
422         d->addr_lo = cpu_to_be32(mapping);
423         d->addr_hi = cpu_to_be32((u64) mapping >> 32);
424         wmb();
425         d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
426         d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
427         return 0;
428 }
429
430 static inline int add_one_rx_chunk(dma_addr_t mapping, struct rx_desc *d,
431                                    unsigned int gen)
432 {
433         d->addr_lo = cpu_to_be32(mapping);
434         d->addr_hi = cpu_to_be32((u64) mapping >> 32);
435         wmb();
436         d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
437         d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
438         return 0;
439 }
440
441 static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q,
442                           struct rx_sw_desc *sd, gfp_t gfp,
443                           unsigned int order)
444 {
445         if (!q->pg_chunk.page) {
446                 dma_addr_t mapping;
447
448                 q->pg_chunk.page = alloc_pages(gfp, order);
449                 if (unlikely(!q->pg_chunk.page))
450                         return -ENOMEM;
451                 q->pg_chunk.va = page_address(q->pg_chunk.page);
452                 q->pg_chunk.p_cnt = q->pg_chunk.va + (PAGE_SIZE << order) -
453                                     SGE_PG_RSVD;
454                 q->pg_chunk.offset = 0;
455                 mapping = pci_map_page(adapter->pdev, q->pg_chunk.page,
456                                        0, q->alloc_size, PCI_DMA_FROMDEVICE);
457                 q->pg_chunk.mapping = mapping;
458         }
459         sd->pg_chunk = q->pg_chunk;
460
461         prefetch(sd->pg_chunk.p_cnt);
462
463         q->pg_chunk.offset += q->buf_size;
464         if (q->pg_chunk.offset == (PAGE_SIZE << order))
465                 q->pg_chunk.page = NULL;
466         else {
467                 q->pg_chunk.va += q->buf_size;
468                 get_page(q->pg_chunk.page);
469         }
470
471         if (sd->pg_chunk.offset == 0)
472                 *sd->pg_chunk.p_cnt = 1;
473         else
474                 *sd->pg_chunk.p_cnt += 1;
475
476         return 0;
477 }
478
479 static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
480 {
481         if (q->pend_cred >= q->credits / 4) {
482                 q->pend_cred = 0;
483                 wmb();
484                 t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
485         }
486 }
487
488 /**
489  *      refill_fl - refill an SGE free-buffer list
490  *      @adapter: the adapter
491  *      @q: the free-list to refill
492  *      @n: the number of new buffers to allocate
493  *      @gfp: the gfp flags for allocating new buffers
494  *
495  *      (Re)populate an SGE free-buffer list with up to @n new packet buffers,
496  *      allocated with the supplied gfp flags.  The caller must assure that
497  *      @n does not exceed the queue's capacity.
498  */
499 static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
500 {
501         struct rx_sw_desc *sd = &q->sdesc[q->pidx];
502         struct rx_desc *d = &q->desc[q->pidx];
503         unsigned int count = 0;
504
505         while (n--) {
506                 dma_addr_t mapping;
507                 int err;
508
509                 if (q->use_pages) {
510                         if (unlikely(alloc_pg_chunk(adap, q, sd, gfp,
511                                                     q->order))) {
512 nomem:                          q->alloc_failed++;
513                                 break;
514                         }
515                         mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset;
516                         pci_unmap_addr_set(sd, dma_addr, mapping);
517
518                         add_one_rx_chunk(mapping, d, q->gen);
519                         pci_dma_sync_single_for_device(adap->pdev, mapping,
520                                                 q->buf_size - SGE_PG_RSVD,
521                                                 PCI_DMA_FROMDEVICE);
522                 } else {
523                         void *buf_start;
524
525                         struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
526                         if (!skb)
527                                 goto nomem;
528
529                         sd->skb = skb;
530                         buf_start = skb->data;
531                         err = add_one_rx_buf(buf_start, q->buf_size, d, sd,
532                                              q->gen, adap->pdev);
533                         if (unlikely(err)) {
534                                 clear_rx_desc(adap->pdev, q, sd);
535                                 break;
536                         }
537                 }
538
539                 d++;
540                 sd++;
541                 if (++q->pidx == q->size) {
542                         q->pidx = 0;
543                         q->gen ^= 1;
544                         sd = q->sdesc;
545                         d = q->desc;
546                 }
547                 count++;
548         }
549
550         q->credits += count;
551         q->pend_cred += count;
552         ring_fl_db(adap, q);
553
554         return count;
555 }
556
557 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
558 {
559         refill_fl(adap, fl, min(MAX_RX_REFILL, fl->size - fl->credits),
560                   GFP_ATOMIC | __GFP_COMP);
561 }
562
563 /**
564  *      recycle_rx_buf - recycle a receive buffer
565  *      @adapter: the adapter
566  *      @q: the SGE free list
567  *      @idx: index of buffer to recycle
568  *
569  *      Recycles the specified buffer on the given free list by adding it at
570  *      the next available slot on the list.
571  */
572 static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
573                            unsigned int idx)
574 {
575         struct rx_desc *from = &q->desc[idx];
576         struct rx_desc *to = &q->desc[q->pidx];
577
578         q->sdesc[q->pidx] = q->sdesc[idx];
579         to->addr_lo = from->addr_lo;    /* already big endian */
580         to->addr_hi = from->addr_hi;    /* likewise */
581         wmb();
582         to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
583         to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
584
585         if (++q->pidx == q->size) {
586                 q->pidx = 0;
587                 q->gen ^= 1;
588         }
589
590         q->credits++;
591         q->pend_cred++;
592         ring_fl_db(adap, q);
593 }
594
595 /**
596  *      alloc_ring - allocate resources for an SGE descriptor ring
597  *      @pdev: the PCI device
598  *      @nelem: the number of descriptors
599  *      @elem_size: the size of each descriptor
600  *      @sw_size: the size of the SW state associated with each ring element
601  *      @phys: the physical address of the allocated ring
602  *      @metadata: address of the array holding the SW state for the ring
603  *
604  *      Allocates resources for an SGE descriptor ring, such as Tx queues,
605  *      free buffer lists, or response queues.  Each SGE ring requires
606  *      space for its HW descriptors plus, optionally, space for the SW state
607  *      associated with each HW entry (the metadata).  The function returns
608  *      three values: the virtual address for the HW ring (the return value
609  *      of the function), the physical address of the HW ring, and the address
610  *      of the SW ring.
611  */
612 static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
613                         size_t sw_size, dma_addr_t * phys, void *metadata)
614 {
615         size_t len = nelem * elem_size;
616         void *s = NULL;
617         void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
618
619         if (!p)
620                 return NULL;
621         if (sw_size && metadata) {
622                 s = kcalloc(nelem, sw_size, GFP_KERNEL);
623
624                 if (!s) {
625                         dma_free_coherent(&pdev->dev, len, p, *phys);
626                         return NULL;
627                 }
628                 *(void **)metadata = s;
629         }
630         memset(p, 0, len);
631         return p;
632 }
633
634 /**
635  *      t3_reset_qset - reset a sge qset
636  *      @q: the queue set
637  *
638  *      Reset the qset structure.
639  *      the NAPI structure is preserved in the event of
640  *      the qset's reincarnation, for example during EEH recovery.
641  */
642 static void t3_reset_qset(struct sge_qset *q)
643 {
644         if (q->adap &&
645             !(q->adap->flags & NAPI_INIT)) {
646                 memset(q, 0, sizeof(*q));
647                 return;
648         }
649
650         q->adap = NULL;
651         memset(&q->rspq, 0, sizeof(q->rspq));
652         memset(q->fl, 0, sizeof(struct sge_fl) * SGE_RXQ_PER_SET);
653         memset(q->txq, 0, sizeof(struct sge_txq) * SGE_TXQ_PER_SET);
654         q->txq_stopped = 0;
655         q->tx_reclaim_timer.function = NULL; /* for t3_stop_sge_timers() */
656         q->rx_reclaim_timer.function = NULL;
657         q->nomem = 0;
658         napi_free_frags(&q->napi);
659 }
660
661
662 /**
663  *      free_qset - free the resources of an SGE queue set
664  *      @adapter: the adapter owning the queue set
665  *      @q: the queue set
666  *
667  *      Release the HW and SW resources associated with an SGE queue set, such
668  *      as HW contexts, packet buffers, and descriptor rings.  Traffic to the
669  *      queue set must be quiesced prior to calling this.
670  */
671 static void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
672 {
673         int i;
674         struct pci_dev *pdev = adapter->pdev;
675
676         for (i = 0; i < SGE_RXQ_PER_SET; ++i)
677                 if (q->fl[i].desc) {
678                         spin_lock_irq(&adapter->sge.reg_lock);
679                         t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
680                         spin_unlock_irq(&adapter->sge.reg_lock);
681                         free_rx_bufs(pdev, &q->fl[i]);
682                         kfree(q->fl[i].sdesc);
683                         dma_free_coherent(&pdev->dev,
684                                           q->fl[i].size *
685                                           sizeof(struct rx_desc), q->fl[i].desc,
686                                           q->fl[i].phys_addr);
687                 }
688
689         for (i = 0; i < SGE_TXQ_PER_SET; ++i)
690                 if (q->txq[i].desc) {
691                         spin_lock_irq(&adapter->sge.reg_lock);
692                         t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
693                         spin_unlock_irq(&adapter->sge.reg_lock);
694                         if (q->txq[i].sdesc) {
695                                 free_tx_desc(adapter, &q->txq[i],
696                                              q->txq[i].in_use);
697                                 kfree(q->txq[i].sdesc);
698                         }
699                         dma_free_coherent(&pdev->dev,
700                                           q->txq[i].size *
701                                           sizeof(struct tx_desc),
702                                           q->txq[i].desc, q->txq[i].phys_addr);
703                         __skb_queue_purge(&q->txq[i].sendq);
704                 }
705
706         if (q->rspq.desc) {
707                 spin_lock_irq(&adapter->sge.reg_lock);
708                 t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
709                 spin_unlock_irq(&adapter->sge.reg_lock);
710                 dma_free_coherent(&pdev->dev,
711                                   q->rspq.size * sizeof(struct rsp_desc),
712                                   q->rspq.desc, q->rspq.phys_addr);
713         }
714
715         t3_reset_qset(q);
716 }
717
718 /**
719  *      init_qset_cntxt - initialize an SGE queue set context info
720  *      @qs: the queue set
721  *      @id: the queue set id
722  *
723  *      Initializes the TIDs and context ids for the queues of a queue set.
724  */
725 static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
726 {
727         qs->rspq.cntxt_id = id;
728         qs->fl[0].cntxt_id = 2 * id;
729         qs->fl[1].cntxt_id = 2 * id + 1;
730         qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
731         qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
732         qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
733         qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
734         qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
735 }
736
737 /**
738  *      sgl_len - calculates the size of an SGL of the given capacity
739  *      @n: the number of SGL entries
740  *
741  *      Calculates the number of flits needed for a scatter/gather list that
742  *      can hold the given number of entries.
743  */
744 static inline unsigned int sgl_len(unsigned int n)
745 {
746         /* alternatively: 3 * (n / 2) + 2 * (n & 1) */
747         return (3 * n) / 2 + (n & 1);
748 }
749
750 /**
751  *      flits_to_desc - returns the num of Tx descriptors for the given flits
752  *      @n: the number of flits
753  *
754  *      Calculates the number of Tx descriptors needed for the supplied number
755  *      of flits.
756  */
757 static inline unsigned int flits_to_desc(unsigned int n)
758 {
759         BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
760         return flit_desc_map[n];
761 }
762
763 /**
764  *      get_packet - return the next ingress packet buffer from a free list
765  *      @adap: the adapter that received the packet
766  *      @fl: the SGE free list holding the packet
767  *      @len: the packet length including any SGE padding
768  *      @drop_thres: # of remaining buffers before we start dropping packets
769  *
770  *      Get the next packet from a free list and complete setup of the
771  *      sk_buff.  If the packet is small we make a copy and recycle the
772  *      original buffer, otherwise we use the original buffer itself.  If a
773  *      positive drop threshold is supplied packets are dropped and their
774  *      buffers recycled if (a) the number of remaining buffers is under the
775  *      threshold and the packet is too big to copy, or (b) the packet should
776  *      be copied but there is no memory for the copy.
777  */
778 static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
779                                   unsigned int len, unsigned int drop_thres)
780 {
781         struct sk_buff *skb = NULL;
782         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
783
784         prefetch(sd->skb->data);
785         fl->credits--;
786
787         if (len <= SGE_RX_COPY_THRES) {
788                 skb = alloc_skb(len, GFP_ATOMIC);
789                 if (likely(skb != NULL)) {
790                         __skb_put(skb, len);
791                         pci_dma_sync_single_for_cpu(adap->pdev,
792                                             pci_unmap_addr(sd, dma_addr), len,
793                                             PCI_DMA_FROMDEVICE);
794                         memcpy(skb->data, sd->skb->data, len);
795                         pci_dma_sync_single_for_device(adap->pdev,
796                                             pci_unmap_addr(sd, dma_addr), len,
797                                             PCI_DMA_FROMDEVICE);
798                 } else if (!drop_thres)
799                         goto use_orig_buf;
800 recycle:
801                 recycle_rx_buf(adap, fl, fl->cidx);
802                 return skb;
803         }
804
805         if (unlikely(fl->credits < drop_thres) &&
806             refill_fl(adap, fl, min(MAX_RX_REFILL, fl->size - fl->credits - 1),
807                       GFP_ATOMIC | __GFP_COMP) == 0)
808                 goto recycle;
809
810 use_orig_buf:
811         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
812                          fl->buf_size, PCI_DMA_FROMDEVICE);
813         skb = sd->skb;
814         skb_put(skb, len);
815         __refill_fl(adap, fl);
816         return skb;
817 }
818
819 /**
820  *      get_packet_pg - return the next ingress packet buffer from a free list
821  *      @adap: the adapter that received the packet
822  *      @fl: the SGE free list holding the packet
823  *      @len: the packet length including any SGE padding
824  *      @drop_thres: # of remaining buffers before we start dropping packets
825  *
826  *      Get the next packet from a free list populated with page chunks.
827  *      If the packet is small we make a copy and recycle the original buffer,
828  *      otherwise we attach the original buffer as a page fragment to a fresh
829  *      sk_buff.  If a positive drop threshold is supplied packets are dropped
830  *      and their buffers recycled if (a) the number of remaining buffers is
831  *      under the threshold and the packet is too big to copy, or (b) there's
832  *      no system memory.
833  *
834  *      Note: this function is similar to @get_packet but deals with Rx buffers
835  *      that are page chunks rather than sk_buffs.
836  */
837 static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
838                                      struct sge_rspq *q, unsigned int len,
839                                      unsigned int drop_thres)
840 {
841         struct sk_buff *newskb, *skb;
842         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
843
844         dma_addr_t dma_addr = pci_unmap_addr(sd, dma_addr);
845
846         newskb = skb = q->pg_skb;
847         if (!skb && (len <= SGE_RX_COPY_THRES)) {
848                 newskb = alloc_skb(len, GFP_ATOMIC);
849                 if (likely(newskb != NULL)) {
850                         __skb_put(newskb, len);
851                         pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
852                                             PCI_DMA_FROMDEVICE);
853                         memcpy(newskb->data, sd->pg_chunk.va, len);
854                         pci_dma_sync_single_for_device(adap->pdev, dma_addr,
855                                                        len,
856                                                        PCI_DMA_FROMDEVICE);
857                 } else if (!drop_thres)
858                         return NULL;
859 recycle:
860                 fl->credits--;
861                 recycle_rx_buf(adap, fl, fl->cidx);
862                 q->rx_recycle_buf++;
863                 return newskb;
864         }
865
866         if (unlikely(q->rx_recycle_buf || (!skb && fl->credits <= drop_thres)))
867                 goto recycle;
868
869         prefetch(sd->pg_chunk.p_cnt);
870
871         if (!skb)
872                 newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
873
874         if (unlikely(!newskb)) {
875                 if (!drop_thres)
876                         return NULL;
877                 goto recycle;
878         }
879
880         pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
881                                     PCI_DMA_FROMDEVICE);
882         (*sd->pg_chunk.p_cnt)--;
883         if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
884                 pci_unmap_page(adap->pdev,
885                                sd->pg_chunk.mapping,
886                                fl->alloc_size,
887                                PCI_DMA_FROMDEVICE);
888         if (!skb) {
889                 __skb_put(newskb, SGE_RX_PULL_LEN);
890                 memcpy(newskb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
891                 skb_fill_page_desc(newskb, 0, sd->pg_chunk.page,
892                                    sd->pg_chunk.offset + SGE_RX_PULL_LEN,
893                                    len - SGE_RX_PULL_LEN);
894                 newskb->len = len;
895                 newskb->data_len = len - SGE_RX_PULL_LEN;
896                 newskb->truesize += newskb->data_len;
897         } else {
898                 skb_fill_page_desc(newskb, skb_shinfo(newskb)->nr_frags,
899                                    sd->pg_chunk.page,
900                                    sd->pg_chunk.offset, len);
901                 newskb->len += len;
902                 newskb->data_len += len;
903                 newskb->truesize += len;
904         }
905
906         fl->credits--;
907         /*
908          * We do not refill FLs here, we let the caller do it to overlap a
909          * prefetch.
910          */
911         return newskb;
912 }
913
914 /**
915  *      get_imm_packet - return the next ingress packet buffer from a response
916  *      @resp: the response descriptor containing the packet data
917  *
918  *      Return a packet containing the immediate data of the given response.
919  */
920 static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
921 {
922         struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
923
924         if (skb) {
925                 __skb_put(skb, IMMED_PKT_SIZE);
926                 skb_copy_to_linear_data(skb, resp->imm_data, IMMED_PKT_SIZE);
927         }
928         return skb;
929 }
930
931 /**
932  *      calc_tx_descs - calculate the number of Tx descriptors for a packet
933  *      @skb: the packet
934  *
935  *      Returns the number of Tx descriptors needed for the given Ethernet
936  *      packet.  Ethernet packets require addition of WR and CPL headers.
937  */
938 static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
939 {
940         unsigned int flits;
941
942         if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
943                 return 1;
944
945         flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
946         if (skb_shinfo(skb)->gso_size)
947                 flits++;
948         return flits_to_desc(flits);
949 }
950
951 /**
952  *      make_sgl - populate a scatter/gather list for a packet
953  *      @skb: the packet
954  *      @sgp: the SGL to populate
955  *      @start: start address of skb main body data to include in the SGL
956  *      @len: length of skb main body data to include in the SGL
957  *      @pdev: the PCI device
958  *
959  *      Generates a scatter/gather list for the buffers that make up a packet
960  *      and returns the SGL size in 8-byte words.  The caller must size the SGL
961  *      appropriately.
962  */
963 static inline unsigned int make_sgl(const struct sk_buff *skb,
964                                     struct sg_ent *sgp, unsigned char *start,
965                                     unsigned int len, struct pci_dev *pdev)
966 {
967         dma_addr_t mapping;
968         unsigned int i, j = 0, nfrags;
969
970         if (len) {
971                 mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
972                 sgp->len[0] = cpu_to_be32(len);
973                 sgp->addr[0] = cpu_to_be64(mapping);
974                 j = 1;
975         }
976
977         nfrags = skb_shinfo(skb)->nr_frags;
978         for (i = 0; i < nfrags; i++) {
979                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
980
981                 mapping = pci_map_page(pdev, frag->page, frag->page_offset,
982                                        frag->size, PCI_DMA_TODEVICE);
983                 sgp->len[j] = cpu_to_be32(frag->size);
984                 sgp->addr[j] = cpu_to_be64(mapping);
985                 j ^= 1;
986                 if (j == 0)
987                         ++sgp;
988         }
989         if (j)
990                 sgp->len[j] = 0;
991         return ((nfrags + (len != 0)) * 3) / 2 + j;
992 }
993
994 /**
995  *      check_ring_tx_db - check and potentially ring a Tx queue's doorbell
996  *      @adap: the adapter
997  *      @q: the Tx queue
998  *
999  *      Ring the doorbel if a Tx queue is asleep.  There is a natural race,
1000  *      where the HW is going to sleep just after we checked, however,
1001  *      then the interrupt handler will detect the outstanding TX packet
1002  *      and ring the doorbell for us.
1003  *
1004  *      When GTS is disabled we unconditionally ring the doorbell.
1005  */
1006 static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
1007 {
1008 #if USE_GTS
1009         clear_bit(TXQ_LAST_PKT_DB, &q->flags);
1010         if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
1011                 set_bit(TXQ_LAST_PKT_DB, &q->flags);
1012                 t3_write_reg(adap, A_SG_KDOORBELL,
1013                              F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1014         }
1015 #else
1016         wmb();                  /* write descriptors before telling HW */
1017         t3_write_reg(adap, A_SG_KDOORBELL,
1018                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1019 #endif
1020 }
1021
1022 static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
1023 {
1024 #if SGE_NUM_GENBITS == 2
1025         d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
1026 #endif
1027 }
1028
1029 /**
1030  *      write_wr_hdr_sgl - write a WR header and, optionally, SGL
1031  *      @ndesc: number of Tx descriptors spanned by the SGL
1032  *      @skb: the packet corresponding to the WR
1033  *      @d: first Tx descriptor to be written
1034  *      @pidx: index of above descriptors
1035  *      @q: the SGE Tx queue
1036  *      @sgl: the SGL
1037  *      @flits: number of flits to the start of the SGL in the first descriptor
1038  *      @sgl_flits: the SGL size in flits
1039  *      @gen: the Tx descriptor generation
1040  *      @wr_hi: top 32 bits of WR header based on WR type (big endian)
1041  *      @wr_lo: low 32 bits of WR header based on WR type (big endian)
1042  *
1043  *      Write a work request header and an associated SGL.  If the SGL is
1044  *      small enough to fit into one Tx descriptor it has already been written
1045  *      and we just need to write the WR header.  Otherwise we distribute the
1046  *      SGL across the number of descriptors it spans.
1047  */
1048 static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
1049                              struct tx_desc *d, unsigned int pidx,
1050                              const struct sge_txq *q,
1051                              const struct sg_ent *sgl,
1052                              unsigned int flits, unsigned int sgl_flits,
1053                              unsigned int gen, __be32 wr_hi,
1054                              __be32 wr_lo)
1055 {
1056         struct work_request_hdr *wrp = (struct work_request_hdr *)d;
1057         struct tx_sw_desc *sd = &q->sdesc[pidx];
1058
1059         sd->skb = skb;
1060         if (need_skb_unmap()) {
1061                 sd->fragidx = 0;
1062                 sd->addr_idx = 0;
1063                 sd->sflit = flits;
1064         }
1065
1066         if (likely(ndesc == 1)) {
1067                 sd->eop = 1;
1068                 wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
1069                                    V_WR_SGLSFLT(flits)) | wr_hi;
1070                 wmb();
1071                 wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
1072                                    V_WR_GEN(gen)) | wr_lo;
1073                 wr_gen2(d, gen);
1074         } else {
1075                 unsigned int ogen = gen;
1076                 const u64 *fp = (const u64 *)sgl;
1077                 struct work_request_hdr *wp = wrp;
1078
1079                 wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
1080                                    V_WR_SGLSFLT(flits)) | wr_hi;
1081
1082                 while (sgl_flits) {
1083                         unsigned int avail = WR_FLITS - flits;
1084
1085                         if (avail > sgl_flits)
1086                                 avail = sgl_flits;
1087                         memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
1088                         sgl_flits -= avail;
1089                         ndesc--;
1090                         if (!sgl_flits)
1091                                 break;
1092
1093                         fp += avail;
1094                         d++;
1095                         sd->eop = 0;
1096                         sd++;
1097                         if (++pidx == q->size) {
1098                                 pidx = 0;
1099                                 gen ^= 1;
1100                                 d = q->desc;
1101                                 sd = q->sdesc;
1102                         }
1103
1104                         sd->skb = skb;
1105                         wrp = (struct work_request_hdr *)d;
1106                         wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
1107                                            V_WR_SGLSFLT(1)) | wr_hi;
1108                         wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
1109                                                         sgl_flits + 1)) |
1110                                            V_WR_GEN(gen)) | wr_lo;
1111                         wr_gen2(d, gen);
1112                         flits = 1;
1113                 }
1114                 sd->eop = 1;
1115                 wrp->wr_hi |= htonl(F_WR_EOP);
1116                 wmb();
1117                 wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
1118                 wr_gen2((struct tx_desc *)wp, ogen);
1119                 WARN_ON(ndesc != 0);
1120         }
1121 }
1122
1123 /**
1124  *      write_tx_pkt_wr - write a TX_PKT work request
1125  *      @adap: the adapter
1126  *      @skb: the packet to send
1127  *      @pi: the egress interface
1128  *      @pidx: index of the first Tx descriptor to write
1129  *      @gen: the generation value to use
1130  *      @q: the Tx queue
1131  *      @ndesc: number of descriptors the packet will occupy
1132  *      @compl: the value of the COMPL bit to use
1133  *
1134  *      Generate a TX_PKT work request to send the supplied packet.
1135  */
1136 static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
1137                             const struct port_info *pi,
1138                             unsigned int pidx, unsigned int gen,
1139                             struct sge_txq *q, unsigned int ndesc,
1140                             unsigned int compl)
1141 {
1142         unsigned int flits, sgl_flits, cntrl, tso_info;
1143         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1144         struct tx_desc *d = &q->desc[pidx];
1145         struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
1146
1147         cpl->len = htonl(skb->len);
1148         cntrl = V_TXPKT_INTF(pi->port_id);
1149
1150         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1151                 cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
1152
1153         tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
1154         if (tso_info) {
1155                 int eth_type;
1156                 struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
1157
1158                 d->flit[2] = 0;
1159                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
1160                 hdr->cntrl = htonl(cntrl);
1161                 eth_type = skb_network_offset(skb) == ETH_HLEN ?
1162                     CPL_ETH_II : CPL_ETH_II_VLAN;
1163                 tso_info |= V_LSO_ETH_TYPE(eth_type) |
1164                     V_LSO_IPHDR_WORDS(ip_hdr(skb)->ihl) |
1165                     V_LSO_TCPHDR_WORDS(tcp_hdr(skb)->doff);
1166                 hdr->lso_info = htonl(tso_info);
1167                 flits = 3;
1168         } else {
1169                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
1170                 cntrl |= F_TXPKT_IPCSUM_DIS;    /* SW calculates IP csum */
1171                 cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
1172                 cpl->cntrl = htonl(cntrl);
1173
1174                 if (skb->len <= WR_LEN - sizeof(*cpl)) {
1175                         q->sdesc[pidx].skb = NULL;
1176                         if (!skb->data_len)
1177                                 skb_copy_from_linear_data(skb, &d->flit[2],
1178                                                           skb->len);
1179                         else
1180                                 skb_copy_bits(skb, 0, &d->flit[2], skb->len);
1181
1182                         flits = (skb->len + 7) / 8 + 2;
1183                         cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
1184                                               V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
1185                                               | F_WR_SOP | F_WR_EOP | compl);
1186                         wmb();
1187                         cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
1188                                               V_WR_TID(q->token));
1189                         wr_gen2(d, gen);
1190                         kfree_skb(skb);
1191                         return;
1192                 }
1193
1194                 flits = 2;
1195         }
1196
1197         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1198         sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
1199
1200         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
1201                          htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
1202                          htonl(V_WR_TID(q->token)));
1203 }
1204
1205 static inline void t3_stop_tx_queue(struct netdev_queue *txq,
1206                                     struct sge_qset *qs, struct sge_txq *q)
1207 {
1208         netif_tx_stop_queue(txq);
1209         set_bit(TXQ_ETH, &qs->txq_stopped);
1210         q->stops++;
1211 }
1212
1213 /**
1214  *      eth_xmit - add a packet to the Ethernet Tx queue
1215  *      @skb: the packet
1216  *      @dev: the egress net device
1217  *
1218  *      Add a packet to an SGE Tx queue.  Runs with softirqs disabled.
1219  */
1220 netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
1221 {
1222         int qidx;
1223         unsigned int ndesc, pidx, credits, gen, compl;
1224         const struct port_info *pi = netdev_priv(dev);
1225         struct adapter *adap = pi->adapter;
1226         struct netdev_queue *txq;
1227         struct sge_qset *qs;
1228         struct sge_txq *q;
1229
1230         /*
1231          * The chip min packet length is 9 octets but play safe and reject
1232          * anything shorter than an Ethernet header.
1233          */
1234         if (unlikely(skb->len < ETH_HLEN)) {
1235                 dev_kfree_skb(skb);
1236                 return NETDEV_TX_OK;
1237         }
1238
1239         qidx = skb_get_queue_mapping(skb);
1240         qs = &pi->qs[qidx];
1241         q = &qs->txq[TXQ_ETH];
1242         txq = netdev_get_tx_queue(dev, qidx);
1243
1244         reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
1245
1246         credits = q->size - q->in_use;
1247         ndesc = calc_tx_descs(skb);
1248
1249         if (unlikely(credits < ndesc)) {
1250                 t3_stop_tx_queue(txq, qs, q);
1251                 dev_err(&adap->pdev->dev,
1252                         "%s: Tx ring %u full while queue awake!\n",
1253                         dev->name, q->cntxt_id & 7);
1254                 return NETDEV_TX_BUSY;
1255         }
1256
1257         q->in_use += ndesc;
1258         if (unlikely(credits - ndesc < q->stop_thres)) {
1259                 t3_stop_tx_queue(txq, qs, q);
1260
1261                 if (should_restart_tx(q) &&
1262                     test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1263                         q->restarts++;
1264                         netif_tx_start_queue(txq);
1265                 }
1266         }
1267
1268         gen = q->gen;
1269         q->unacked += ndesc;
1270         compl = (q->unacked & 8) << (S_WR_COMPL - 3);
1271         q->unacked &= 7;
1272         pidx = q->pidx;
1273         q->pidx += ndesc;
1274         if (q->pidx >= q->size) {
1275                 q->pidx -= q->size;
1276                 q->gen ^= 1;
1277         }
1278
1279         /* update port statistics */
1280         if (skb->ip_summed == CHECKSUM_COMPLETE)
1281                 qs->port_stats[SGE_PSTAT_TX_CSUM]++;
1282         if (skb_shinfo(skb)->gso_size)
1283                 qs->port_stats[SGE_PSTAT_TSO]++;
1284         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1285                 qs->port_stats[SGE_PSTAT_VLANINS]++;
1286
1287         /*
1288          * We do not use Tx completion interrupts to free DMAd Tx packets.
1289          * This is good for performance but means that we rely on new Tx
1290          * packets arriving to run the destructors of completed packets,
1291          * which open up space in their sockets' send queues.  Sometimes
1292          * we do not get such new packets causing Tx to stall.  A single
1293          * UDP transmitter is a good example of this situation.  We have
1294          * a clean up timer that periodically reclaims completed packets
1295          * but it doesn't run often enough (nor do we want it to) to prevent
1296          * lengthy stalls.  A solution to this problem is to run the
1297          * destructor early, after the packet is queued but before it's DMAd.
1298          * A cons is that we lie to socket memory accounting, but the amount
1299          * of extra memory is reasonable (limited by the number of Tx
1300          * descriptors), the packets do actually get freed quickly by new
1301          * packets almost always, and for protocols like TCP that wait for
1302          * acks to really free up the data the extra memory is even less.
1303          * On the positive side we run the destructors on the sending CPU
1304          * rather than on a potentially different completing CPU, usually a
1305          * good thing.  We also run them without holding our Tx queue lock,
1306          * unlike what reclaim_completed_tx() would otherwise do.
1307          *
1308          * Run the destructor before telling the DMA engine about the packet
1309          * to make sure it doesn't complete and get freed prematurely.
1310          */
1311         if (likely(!skb_shared(skb)))
1312                 skb_orphan(skb);
1313
1314         write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
1315         check_ring_tx_db(adap, q);
1316         return NETDEV_TX_OK;
1317 }
1318
1319 /**
1320  *      write_imm - write a packet into a Tx descriptor as immediate data
1321  *      @d: the Tx descriptor to write
1322  *      @skb: the packet
1323  *      @len: the length of packet data to write as immediate data
1324  *      @gen: the generation bit value to write
1325  *
1326  *      Writes a packet as immediate data into a Tx descriptor.  The packet
1327  *      contains a work request at its beginning.  We must write the packet
1328  *      carefully so the SGE doesn't read it accidentally before it's written
1329  *      in its entirety.
1330  */
1331 static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
1332                              unsigned int len, unsigned int gen)
1333 {
1334         struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
1335         struct work_request_hdr *to = (struct work_request_hdr *)d;
1336
1337         if (likely(!skb->data_len))
1338                 memcpy(&to[1], &from[1], len - sizeof(*from));
1339         else
1340                 skb_copy_bits(skb, sizeof(*from), &to[1], len - sizeof(*from));
1341
1342         to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
1343                                         V_WR_BCNTLFLT(len & 7));
1344         wmb();
1345         to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
1346                                         V_WR_LEN((len + 7) / 8));
1347         wr_gen2(d, gen);
1348         kfree_skb(skb);
1349 }
1350
1351 /**
1352  *      check_desc_avail - check descriptor availability on a send queue
1353  *      @adap: the adapter
1354  *      @q: the send queue
1355  *      @skb: the packet needing the descriptors
1356  *      @ndesc: the number of Tx descriptors needed
1357  *      @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
1358  *
1359  *      Checks if the requested number of Tx descriptors is available on an
1360  *      SGE send queue.  If the queue is already suspended or not enough
1361  *      descriptors are available the packet is queued for later transmission.
1362  *      Must be called with the Tx queue locked.
1363  *
1364  *      Returns 0 if enough descriptors are available, 1 if there aren't
1365  *      enough descriptors and the packet has been queued, and 2 if the caller
1366  *      needs to retry because there weren't enough descriptors at the
1367  *      beginning of the call but some freed up in the mean time.
1368  */
1369 static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
1370                                    struct sk_buff *skb, unsigned int ndesc,
1371                                    unsigned int qid)
1372 {
1373         if (unlikely(!skb_queue_empty(&q->sendq))) {
1374               addq_exit:__skb_queue_tail(&q->sendq, skb);
1375                 return 1;
1376         }
1377         if (unlikely(q->size - q->in_use < ndesc)) {
1378                 struct sge_qset *qs = txq_to_qset(q, qid);
1379
1380                 set_bit(qid, &qs->txq_stopped);
1381                 smp_mb__after_clear_bit();
1382
1383                 if (should_restart_tx(q) &&
1384                     test_and_clear_bit(qid, &qs->txq_stopped))
1385                         return 2;
1386
1387                 q->stops++;
1388                 goto addq_exit;
1389         }
1390         return 0;
1391 }
1392
1393 /**
1394  *      reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
1395  *      @q: the SGE control Tx queue
1396  *
1397  *      This is a variant of reclaim_completed_tx() that is used for Tx queues
1398  *      that send only immediate data (presently just the control queues) and
1399  *      thus do not have any sk_buffs to release.
1400  */
1401 static inline void reclaim_completed_tx_imm(struct sge_txq *q)
1402 {
1403         unsigned int reclaim = q->processed - q->cleaned;
1404
1405         q->in_use -= reclaim;
1406         q->cleaned += reclaim;
1407 }
1408
1409 static inline int immediate(const struct sk_buff *skb)
1410 {
1411         return skb->len <= WR_LEN;
1412 }
1413
1414 /**
1415  *      ctrl_xmit - send a packet through an SGE control Tx queue
1416  *      @adap: the adapter
1417  *      @q: the control queue
1418  *      @skb: the packet
1419  *
1420  *      Send a packet through an SGE control Tx queue.  Packets sent through
1421  *      a control queue must fit entirely as immediate data in a single Tx
1422  *      descriptor and have no page fragments.
1423  */
1424 static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
1425                      struct sk_buff *skb)
1426 {
1427         int ret;
1428         struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
1429
1430         if (unlikely(!immediate(skb))) {
1431                 WARN_ON(1);
1432                 dev_kfree_skb(skb);
1433                 return NET_XMIT_SUCCESS;
1434         }
1435
1436         wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
1437         wrp->wr_lo = htonl(V_WR_TID(q->token));
1438
1439         spin_lock(&q->lock);
1440       again:reclaim_completed_tx_imm(q);
1441
1442         ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
1443         if (unlikely(ret)) {
1444                 if (ret == 1) {
1445                         spin_unlock(&q->lock);
1446                         return NET_XMIT_CN;
1447                 }
1448                 goto again;
1449         }
1450
1451         write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1452
1453         q->in_use++;
1454         if (++q->pidx >= q->size) {
1455                 q->pidx = 0;
1456                 q->gen ^= 1;
1457         }
1458         spin_unlock(&q->lock);
1459         wmb();
1460         t3_write_reg(adap, A_SG_KDOORBELL,
1461                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1462         return NET_XMIT_SUCCESS;
1463 }
1464
1465 /**
1466  *      restart_ctrlq - restart a suspended control queue
1467  *      @qs: the queue set cotaining the control queue
1468  *
1469  *      Resumes transmission on a suspended Tx control queue.
1470  */
1471 static void restart_ctrlq(unsigned long data)
1472 {
1473         struct sk_buff *skb;
1474         struct sge_qset *qs = (struct sge_qset *)data;
1475         struct sge_txq *q = &qs->txq[TXQ_CTRL];
1476
1477         spin_lock(&q->lock);
1478       again:reclaim_completed_tx_imm(q);
1479
1480         while (q->in_use < q->size &&
1481                (skb = __skb_dequeue(&q->sendq)) != NULL) {
1482
1483                 write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1484
1485                 if (++q->pidx >= q->size) {
1486                         q->pidx = 0;
1487                         q->gen ^= 1;
1488                 }
1489                 q->in_use++;
1490         }
1491
1492         if (!skb_queue_empty(&q->sendq)) {
1493                 set_bit(TXQ_CTRL, &qs->txq_stopped);
1494                 smp_mb__after_clear_bit();
1495
1496                 if (should_restart_tx(q) &&
1497                     test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
1498                         goto again;
1499                 q->stops++;
1500         }
1501
1502         spin_unlock(&q->lock);
1503         wmb();
1504         t3_write_reg(qs->adap, A_SG_KDOORBELL,
1505                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1506 }
1507
1508 /*
1509  * Send a management message through control queue 0
1510  */
1511 int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
1512 {
1513         int ret;
1514         local_bh_disable();
1515         ret = ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
1516         local_bh_enable();
1517
1518         return ret;
1519 }
1520
1521 /**
1522  *      deferred_unmap_destructor - unmap a packet when it is freed
1523  *      @skb: the packet
1524  *
1525  *      This is the packet destructor used for Tx packets that need to remain
1526  *      mapped until they are freed rather than until their Tx descriptors are
1527  *      freed.
1528  */
1529 static void deferred_unmap_destructor(struct sk_buff *skb)
1530 {
1531         int i;
1532         const dma_addr_t *p;
1533         const struct skb_shared_info *si;
1534         const struct deferred_unmap_info *dui;
1535
1536         dui = (struct deferred_unmap_info *)skb->head;
1537         p = dui->addr;
1538
1539         if (skb->tail - skb->transport_header)
1540                 pci_unmap_single(dui->pdev, *p++,
1541                                  skb->tail - skb->transport_header,
1542                                  PCI_DMA_TODEVICE);
1543
1544         si = skb_shinfo(skb);
1545         for (i = 0; i < si->nr_frags; i++)
1546                 pci_unmap_page(dui->pdev, *p++, si->frags[i].size,
1547                                PCI_DMA_TODEVICE);
1548 }
1549
1550 static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
1551                                      const struct sg_ent *sgl, int sgl_flits)
1552 {
1553         dma_addr_t *p;
1554         struct deferred_unmap_info *dui;
1555
1556         dui = (struct deferred_unmap_info *)skb->head;
1557         dui->pdev = pdev;
1558         for (p = dui->addr; sgl_flits >= 3; sgl++, sgl_flits -= 3) {
1559                 *p++ = be64_to_cpu(sgl->addr[0]);
1560                 *p++ = be64_to_cpu(sgl->addr[1]);
1561         }
1562         if (sgl_flits)
1563                 *p = be64_to_cpu(sgl->addr[0]);
1564 }
1565
1566 /**
1567  *      write_ofld_wr - write an offload work request
1568  *      @adap: the adapter
1569  *      @skb: the packet to send
1570  *      @q: the Tx queue
1571  *      @pidx: index of the first Tx descriptor to write
1572  *      @gen: the generation value to use
1573  *      @ndesc: number of descriptors the packet will occupy
1574  *
1575  *      Write an offload work request to send the supplied packet.  The packet
1576  *      data already carry the work request with most fields populated.
1577  */
1578 static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
1579                           struct sge_txq *q, unsigned int pidx,
1580                           unsigned int gen, unsigned int ndesc)
1581 {
1582         unsigned int sgl_flits, flits;
1583         struct work_request_hdr *from;
1584         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1585         struct tx_desc *d = &q->desc[pidx];
1586
1587         if (immediate(skb)) {
1588                 q->sdesc[pidx].skb = NULL;
1589                 write_imm(d, skb, skb->len, gen);
1590                 return;
1591         }
1592
1593         /* Only TX_DATA builds SGLs */
1594
1595         from = (struct work_request_hdr *)skb->data;
1596         memcpy(&d->flit[1], &from[1],
1597                skb_transport_offset(skb) - sizeof(*from));
1598
1599         flits = skb_transport_offset(skb) / 8;
1600         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1601         sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
1602                              skb->tail - skb->transport_header,
1603                              adap->pdev);
1604         if (need_skb_unmap()) {
1605                 setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
1606                 skb->destructor = deferred_unmap_destructor;
1607         }
1608
1609         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
1610                          gen, from->wr_hi, from->wr_lo);
1611 }
1612
1613 /**
1614  *      calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
1615  *      @skb: the packet
1616  *
1617  *      Returns the number of Tx descriptors needed for the given offload
1618  *      packet.  These packets are already fully constructed.
1619  */
1620 static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
1621 {
1622         unsigned int flits, cnt;
1623
1624         if (skb->len <= WR_LEN)
1625                 return 1;       /* packet fits as immediate data */
1626
1627         flits = skb_transport_offset(skb) / 8;  /* headers */
1628         cnt = skb_shinfo(skb)->nr_frags;
1629         if (skb->tail != skb->transport_header)
1630                 cnt++;
1631         return flits_to_desc(flits + sgl_len(cnt));
1632 }
1633
1634 /**
1635  *      ofld_xmit - send a packet through an offload queue
1636  *      @adap: the adapter
1637  *      @q: the Tx offload queue
1638  *      @skb: the packet
1639  *
1640  *      Send an offload packet through an SGE offload queue.
1641  */
1642 static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
1643                      struct sk_buff *skb)
1644 {
1645         int ret;
1646         unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
1647
1648         spin_lock(&q->lock);
1649 again:  reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
1650
1651         ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
1652         if (unlikely(ret)) {
1653                 if (ret == 1) {
1654                         skb->priority = ndesc;  /* save for restart */
1655                         spin_unlock(&q->lock);
1656                         return NET_XMIT_CN;
1657                 }
1658                 goto again;
1659         }
1660
1661         gen = q->gen;
1662         q->in_use += ndesc;
1663         pidx = q->pidx;
1664         q->pidx += ndesc;
1665         if (q->pidx >= q->size) {
1666                 q->pidx -= q->size;
1667                 q->gen ^= 1;
1668         }
1669         spin_unlock(&q->lock);
1670
1671         write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1672         check_ring_tx_db(adap, q);
1673         return NET_XMIT_SUCCESS;
1674 }
1675
1676 /**
1677  *      restart_offloadq - restart a suspended offload queue
1678  *      @qs: the queue set cotaining the offload queue
1679  *
1680  *      Resumes transmission on a suspended Tx offload queue.
1681  */
1682 static void restart_offloadq(unsigned long data)
1683 {
1684         struct sk_buff *skb;
1685         struct sge_qset *qs = (struct sge_qset *)data;
1686         struct sge_txq *q = &qs->txq[TXQ_OFLD];
1687         const struct port_info *pi = netdev_priv(qs->netdev);
1688         struct adapter *adap = pi->adapter;
1689
1690         spin_lock(&q->lock);
1691 again:  reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
1692
1693         while ((skb = skb_peek(&q->sendq)) != NULL) {
1694                 unsigned int gen, pidx;
1695                 unsigned int ndesc = skb->priority;
1696
1697                 if (unlikely(q->size - q->in_use < ndesc)) {
1698                         set_bit(TXQ_OFLD, &qs->txq_stopped);
1699                         smp_mb__after_clear_bit();
1700
1701                         if (should_restart_tx(q) &&
1702                             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
1703                                 goto again;
1704                         q->stops++;
1705                         break;
1706                 }
1707
1708                 gen = q->gen;
1709                 q->in_use += ndesc;
1710                 pidx = q->pidx;
1711                 q->pidx += ndesc;
1712                 if (q->pidx >= q->size) {
1713                         q->pidx -= q->size;
1714                         q->gen ^= 1;
1715                 }
1716                 __skb_unlink(skb, &q->sendq);
1717                 spin_unlock(&q->lock);
1718
1719                 write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1720                 spin_lock(&q->lock);
1721         }
1722         spin_unlock(&q->lock);
1723
1724 #if USE_GTS
1725         set_bit(TXQ_RUNNING, &q->flags);
1726         set_bit(TXQ_LAST_PKT_DB, &q->flags);
1727 #endif
1728         wmb();
1729         t3_write_reg(adap, A_SG_KDOORBELL,
1730                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1731 }
1732
1733 /**
1734  *      queue_set - return the queue set a packet should use
1735  *      @skb: the packet
1736  *
1737  *      Maps a packet to the SGE queue set it should use.  The desired queue
1738  *      set is carried in bits 1-3 in the packet's priority.
1739  */
1740 static inline int queue_set(const struct sk_buff *skb)
1741 {
1742         return skb->priority >> 1;
1743 }
1744
1745 /**
1746  *      is_ctrl_pkt - return whether an offload packet is a control packet
1747  *      @skb: the packet
1748  *
1749  *      Determines whether an offload packet should use an OFLD or a CTRL
1750  *      Tx queue.  This is indicated by bit 0 in the packet's priority.
1751  */
1752 static inline int is_ctrl_pkt(const struct sk_buff *skb)
1753 {
1754         return skb->priority & 1;
1755 }
1756
1757 /**
1758  *      t3_offload_tx - send an offload packet
1759  *      @tdev: the offload device to send to
1760  *      @skb: the packet
1761  *
1762  *      Sends an offload packet.  We use the packet priority to select the
1763  *      appropriate Tx queue as follows: bit 0 indicates whether the packet
1764  *      should be sent as regular or control, bits 1-3 select the queue set.
1765  */
1766 int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
1767 {
1768         struct adapter *adap = tdev2adap(tdev);
1769         struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
1770
1771         if (unlikely(is_ctrl_pkt(skb)))
1772                 return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
1773
1774         return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
1775 }
1776
1777 /**
1778  *      offload_enqueue - add an offload packet to an SGE offload receive queue
1779  *      @q: the SGE response queue
1780  *      @skb: the packet
1781  *
1782  *      Add a new offload packet to an SGE response queue's offload packet
1783  *      queue.  If the packet is the first on the queue it schedules the RX
1784  *      softirq to process the queue.
1785  */
1786 static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
1787 {
1788         int was_empty = skb_queue_empty(&q->rx_queue);
1789
1790         __skb_queue_tail(&q->rx_queue, skb);
1791
1792         if (was_empty) {
1793                 struct sge_qset *qs = rspq_to_qset(q);
1794
1795                 napi_schedule(&qs->napi);
1796         }
1797 }
1798
1799 /**
1800  *      deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
1801  *      @tdev: the offload device that will be receiving the packets
1802  *      @q: the SGE response queue that assembled the bundle
1803  *      @skbs: the partial bundle
1804  *      @n: the number of packets in the bundle
1805  *
1806  *      Delivers a (partial) bundle of Rx offload packets to an offload device.
1807  */
1808 static inline void deliver_partial_bundle(struct t3cdev *tdev,
1809                                           struct sge_rspq *q,
1810                                           struct sk_buff *skbs[], int n)
1811 {
1812         if (n) {
1813                 q->offload_bundles++;
1814                 tdev->recv(tdev, skbs, n);
1815         }
1816 }
1817
1818 /**
1819  *      ofld_poll - NAPI handler for offload packets in interrupt mode
1820  *      @dev: the network device doing the polling
1821  *      @budget: polling budget
1822  *
1823  *      The NAPI handler for offload packets when a response queue is serviced
1824  *      by the hard interrupt handler, i.e., when it's operating in non-polling
1825  *      mode.  Creates small packet batches and sends them through the offload
1826  *      receive handler.  Batches need to be of modest size as we do prefetches
1827  *      on the packets in each.
1828  */
1829 static int ofld_poll(struct napi_struct *napi, int budget)
1830 {
1831         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
1832         struct sge_rspq *q = &qs->rspq;
1833         struct adapter *adapter = qs->adap;
1834         int work_done = 0;
1835
1836         while (work_done < budget) {
1837                 struct sk_buff *skb, *tmp, *skbs[RX_BUNDLE_SIZE];
1838                 struct sk_buff_head queue;
1839                 int ngathered;
1840
1841                 spin_lock_irq(&q->lock);
1842                 __skb_queue_head_init(&queue);
1843                 skb_queue_splice_init(&q->rx_queue, &queue);
1844                 if (skb_queue_empty(&queue)) {
1845                         napi_complete(napi);
1846                         spin_unlock_irq(&q->lock);
1847                         return work_done;
1848                 }
1849                 spin_unlock_irq(&q->lock);
1850
1851                 ngathered = 0;
1852                 skb_queue_walk_safe(&queue, skb, tmp) {
1853                         if (work_done >= budget)
1854                                 break;
1855                         work_done++;
1856
1857                         __skb_unlink(skb, &queue);
1858                         prefetch(skb->data);
1859                         skbs[ngathered] = skb;
1860                         if (++ngathered == RX_BUNDLE_SIZE) {
1861                                 q->offload_bundles++;
1862                                 adapter->tdev.recv(&adapter->tdev, skbs,
1863                                                    ngathered);
1864                                 ngathered = 0;
1865                         }
1866                 }
1867                 if (!skb_queue_empty(&queue)) {
1868                         /* splice remaining packets back onto Rx queue */
1869                         spin_lock_irq(&q->lock);
1870                         skb_queue_splice(&queue, &q->rx_queue);
1871                         spin_unlock_irq(&q->lock);
1872                 }
1873                 deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
1874         }
1875
1876         return work_done;
1877 }
1878
1879 /**
1880  *      rx_offload - process a received offload packet
1881  *      @tdev: the offload device receiving the packet
1882  *      @rq: the response queue that received the packet
1883  *      @skb: the packet
1884  *      @rx_gather: a gather list of packets if we are building a bundle
1885  *      @gather_idx: index of the next available slot in the bundle
1886  *
1887  *      Process an ingress offload pakcet and add it to the offload ingress
1888  *      queue.  Returns the index of the next available slot in the bundle.
1889  */
1890 static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
1891                              struct sk_buff *skb, struct sk_buff *rx_gather[],
1892                              unsigned int gather_idx)
1893 {
1894         skb_reset_mac_header(skb);
1895         skb_reset_network_header(skb);
1896         skb_reset_transport_header(skb);
1897
1898         if (rq->polling) {
1899                 rx_gather[gather_idx++] = skb;
1900                 if (gather_idx == RX_BUNDLE_SIZE) {
1901                         tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
1902                         gather_idx = 0;
1903                         rq->offload_bundles++;
1904                 }
1905         } else
1906                 offload_enqueue(rq, skb);
1907
1908         return gather_idx;
1909 }
1910
1911 /**
1912  *      restart_tx - check whether to restart suspended Tx queues
1913  *      @qs: the queue set to resume
1914  *
1915  *      Restarts suspended Tx queues of an SGE queue set if they have enough
1916  *      free resources to resume operation.
1917  */
1918 static void restart_tx(struct sge_qset *qs)
1919 {
1920         if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
1921             should_restart_tx(&qs->txq[TXQ_ETH]) &&
1922             test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1923                 qs->txq[TXQ_ETH].restarts++;
1924                 if (netif_running(qs->netdev))
1925                         netif_tx_wake_queue(qs->tx_q);
1926         }
1927
1928         if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
1929             should_restart_tx(&qs->txq[TXQ_OFLD]) &&
1930             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
1931                 qs->txq[TXQ_OFLD].restarts++;
1932                 tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
1933         }
1934         if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
1935             should_restart_tx(&qs->txq[TXQ_CTRL]) &&
1936             test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
1937                 qs->txq[TXQ_CTRL].restarts++;
1938                 tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
1939         }
1940 }
1941
1942 /**
1943  *      cxgb3_arp_process - process an ARP request probing a private IP address
1944  *      @adapter: the adapter
1945  *      @skb: the skbuff containing the ARP request
1946  *
1947  *      Check if the ARP request is probing the private IP address
1948  *      dedicated to iSCSI, generate an ARP reply if so.
1949  */
1950 static void cxgb3_arp_process(struct port_info *pi, struct sk_buff *skb)
1951 {
1952         struct net_device *dev = skb->dev;
1953         struct arphdr *arp;
1954         unsigned char *arp_ptr;
1955         unsigned char *sha;
1956         __be32 sip, tip;
1957
1958         if (!dev)
1959                 return;
1960
1961         skb_reset_network_header(skb);
1962         arp = arp_hdr(skb);
1963
1964         if (arp->ar_op != htons(ARPOP_REQUEST))
1965                 return;
1966
1967         arp_ptr = (unsigned char *)(arp + 1);
1968         sha = arp_ptr;
1969         arp_ptr += dev->addr_len;
1970         memcpy(&sip, arp_ptr, sizeof(sip));
1971         arp_ptr += sizeof(sip);
1972         arp_ptr += dev->addr_len;
1973         memcpy(&tip, arp_ptr, sizeof(tip));
1974
1975         if (tip != pi->iscsi_ipv4addr)
1976                 return;
1977
1978         arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
1979                  pi->iscsic.mac_addr, sha);
1980
1981 }
1982
1983 static inline int is_arp(struct sk_buff *skb)
1984 {
1985         return skb->protocol == htons(ETH_P_ARP);
1986 }
1987
1988 static void cxgb3_process_iscsi_prov_pack(struct port_info *pi,
1989                                         struct sk_buff *skb)
1990 {
1991         if (is_arp(skb)) {
1992                 cxgb3_arp_process(pi, skb);
1993                 return;
1994         }
1995
1996         if (pi->iscsic.recv)
1997                 pi->iscsic.recv(pi, skb);
1998
1999 }
2000
2001 /**
2002  *      rx_eth - process an ingress ethernet packet
2003  *      @adap: the adapter
2004  *      @rq: the response queue that received the packet
2005  *      @skb: the packet
2006  *      @pad: amount of padding at the start of the buffer
2007  *
2008  *      Process an ingress ethernet pakcet and deliver it to the stack.
2009  *      The padding is 2 if the packet was delivered in an Rx buffer and 0
2010  *      if it was immediate data in a response.
2011  */
2012 static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
2013                    struct sk_buff *skb, int pad, int lro)
2014 {
2015         struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
2016         struct sge_qset *qs = rspq_to_qset(rq);
2017         struct port_info *pi;
2018
2019         skb_pull(skb, sizeof(*p) + pad);
2020         skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
2021         pi = netdev_priv(skb->dev);
2022         if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid &&
2023             p->csum == htons(0xffff) && !p->fragment) {
2024                 qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
2025                 skb->ip_summed = CHECKSUM_UNNECESSARY;
2026         } else
2027                 skb->ip_summed = CHECKSUM_NONE;
2028         skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
2029
2030         if (unlikely(p->vlan_valid)) {
2031                 struct vlan_group *grp = pi->vlan_grp;
2032
2033                 qs->port_stats[SGE_PSTAT_VLANEX]++;
2034                 if (likely(grp))
2035                         if (lro)
2036                                 vlan_gro_receive(&qs->napi, grp,
2037                                                  ntohs(p->vlan), skb);
2038                         else {
2039                                 if (unlikely(pi->iscsic.flags)) {
2040                                         unsigned short vtag = ntohs(p->vlan) &
2041                                                                 VLAN_VID_MASK;
2042                                         skb->dev = vlan_group_get_device(grp,
2043                                                                          vtag);
2044                                         cxgb3_process_iscsi_prov_pack(pi, skb);
2045                                 }
2046                                 __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
2047                                                   rq->polling);
2048                         }
2049                 else
2050                         dev_kfree_skb_any(skb);
2051         } else if (rq->polling) {
2052                 if (lro)
2053                         napi_gro_receive(&qs->napi, skb);
2054                 else {
2055                         if (unlikely(pi->iscsic.flags))
2056                                 cxgb3_process_iscsi_prov_pack(pi, skb);
2057                         netif_receive_skb(skb);
2058                 }
2059         } else
2060                 netif_rx(skb);
2061 }
2062
2063 static inline int is_eth_tcp(u32 rss)
2064 {
2065         return G_HASHTYPE(ntohl(rss)) == RSS_HASH_4_TUPLE;
2066 }
2067
2068 /**
2069  *      lro_add_page - add a page chunk to an LRO session
2070  *      @adap: the adapter
2071  *      @qs: the associated queue set
2072  *      @fl: the free list containing the page chunk to add
2073  *      @len: packet length
2074  *      @complete: Indicates the last fragment of a frame
2075  *
2076  *      Add a received packet contained in a page chunk to an existing LRO
2077  *      session.
2078  */
2079 static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
2080                          struct sge_fl *fl, int len, int complete)
2081 {
2082         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
2083         struct port_info *pi = netdev_priv(qs->netdev);
2084         struct sk_buff *skb = NULL;
2085         struct cpl_rx_pkt *cpl;
2086         struct skb_frag_struct *rx_frag;
2087         int nr_frags;
2088         int offset = 0;
2089
2090         if (!qs->nomem) {
2091                 skb = napi_get_frags(&qs->napi);
2092                 qs->nomem = !skb;
2093         }
2094
2095         fl->credits--;
2096
2097         pci_dma_sync_single_for_cpu(adap->pdev,
2098                                     pci_unmap_addr(sd, dma_addr),
2099                                     fl->buf_size - SGE_PG_RSVD,
2100                                     PCI_DMA_FROMDEVICE);
2101
2102         (*sd->pg_chunk.p_cnt)--;
2103         if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
2104                 pci_unmap_page(adap->pdev,
2105                                sd->pg_chunk.mapping,
2106                                fl->alloc_size,
2107                                PCI_DMA_FROMDEVICE);
2108
2109         if (!skb) {
2110                 put_page(sd->pg_chunk.page);
2111                 if (complete)
2112                         qs->nomem = 0;
2113                 return;
2114         }
2115
2116         rx_frag = skb_shinfo(skb)->frags;
2117         nr_frags = skb_shinfo(skb)->nr_frags;
2118
2119         if (!nr_frags) {
2120                 offset = 2 + sizeof(struct cpl_rx_pkt);
2121                 cpl = qs->lro_va = sd->pg_chunk.va + 2;
2122
2123                 if ((pi->rx_offload & T3_RX_CSUM) &&
2124                      cpl->csum_valid && cpl->csum == htons(0xffff)) {
2125                         skb->ip_summed = CHECKSUM_UNNECESSARY;
2126                         qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
2127                 } else
2128                         skb->ip_summed = CHECKSUM_NONE;
2129         } else
2130                 cpl = qs->lro_va;
2131
2132         len -= offset;
2133
2134         rx_frag += nr_frags;
2135         rx_frag->page = sd->pg_chunk.page;
2136         rx_frag->page_offset = sd->pg_chunk.offset + offset;
2137         rx_frag->size = len;
2138
2139         skb->len += len;
2140         skb->data_len += len;
2141         skb->truesize += len;
2142         skb_shinfo(skb)->nr_frags++;
2143
2144         if (!complete)
2145                 return;
2146
2147         skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
2148
2149         if (unlikely(cpl->vlan_valid)) {
2150                 struct vlan_group *grp = pi->vlan_grp;
2151
2152                 if (likely(grp != NULL)) {
2153                         vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan));
2154                         return;
2155                 }
2156         }
2157         napi_gro_frags(&qs->napi);
2158 }
2159
2160 /**
2161  *      handle_rsp_cntrl_info - handles control information in a response
2162  *      @qs: the queue set corresponding to the response
2163  *      @flags: the response control flags
2164  *
2165  *      Handles the control information of an SGE response, such as GTS
2166  *      indications and completion credits for the queue set's Tx queues.
2167  *      HW coalesces credits, we don't do any extra SW coalescing.
2168  */
2169 static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
2170 {
2171         unsigned int credits;
2172
2173 #if USE_GTS
2174         if (flags & F_RSPD_TXQ0_GTS)
2175                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
2176 #endif
2177
2178         credits = G_RSPD_TXQ0_CR(flags);
2179         if (credits)
2180                 qs->txq[TXQ_ETH].processed += credits;
2181
2182         credits = G_RSPD_TXQ2_CR(flags);
2183         if (credits)
2184                 qs->txq[TXQ_CTRL].processed += credits;
2185
2186 # if USE_GTS
2187         if (flags & F_RSPD_TXQ1_GTS)
2188                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
2189 # endif
2190         credits = G_RSPD_TXQ1_CR(flags);
2191         if (credits)
2192                 qs->txq[TXQ_OFLD].processed += credits;
2193 }
2194
2195 /**
2196  *      check_ring_db - check if we need to ring any doorbells
2197  *      @adapter: the adapter
2198  *      @qs: the queue set whose Tx queues are to be examined
2199  *      @sleeping: indicates which Tx queue sent GTS
2200  *
2201  *      Checks if some of a queue set's Tx queues need to ring their doorbells
2202  *      to resume transmission after idling while they still have unprocessed
2203  *      descriptors.
2204  */
2205 static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
2206                           unsigned int sleeping)
2207 {
2208         if (sleeping & F_RSPD_TXQ0_GTS) {
2209                 struct sge_txq *txq = &qs->txq[TXQ_ETH];
2210
2211                 if (txq->cleaned + txq->in_use != txq->processed &&
2212                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
2213                         set_bit(TXQ_RUNNING, &txq->flags);
2214                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
2215                                      V_EGRCNTX(txq->cntxt_id));
2216                 }
2217         }
2218
2219         if (sleeping & F_RSPD_TXQ1_GTS) {
2220                 struct sge_txq *txq = &qs->txq[TXQ_OFLD];
2221
2222                 if (txq->cleaned + txq->in_use != txq->processed &&
2223                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
2224                         set_bit(TXQ_RUNNING, &txq->flags);
2225                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
2226                                      V_EGRCNTX(txq->cntxt_id));
2227                 }
2228         }
2229 }
2230
2231 /**
2232  *      is_new_response - check if a response is newly written
2233  *      @r: the response descriptor
2234  *      @q: the response queue
2235  *
2236  *      Returns true if a response descriptor contains a yet unprocessed
2237  *      response.
2238  */
2239 static inline int is_new_response(const struct rsp_desc *r,
2240                                   const struct sge_rspq *q)
2241 {
2242         return (r->intr_gen & F_RSPD_GEN2) == q->gen;
2243 }
2244
2245 static inline void clear_rspq_bufstate(struct sge_rspq * const q)
2246 {
2247         q->pg_skb = NULL;
2248         q->rx_recycle_buf = 0;
2249 }
2250
2251 #define RSPD_GTS_MASK  (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
2252 #define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
2253                         V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
2254                         V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
2255                         V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
2256
2257 /* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
2258 #define NOMEM_INTR_DELAY 2500
2259
2260 /**
2261  *      process_responses - process responses from an SGE response queue
2262  *      @adap: the adapter
2263  *      @qs: the queue set to which the response queue belongs
2264  *      @budget: how many responses can be processed in this round
2265  *
2266  *      Process responses from an SGE response queue up to the supplied budget.
2267  *      Responses include received packets as well as credits and other events
2268  *      for the queues that belong to the response queue's queue set.
2269  *      A negative budget is effectively unlimited.
2270  *
2271  *      Additionally choose the interrupt holdoff time for the next interrupt
2272  *      on this queue.  If the system is under memory shortage use a fairly
2273  *      long delay to help recovery.
2274  */
2275 static int process_responses(struct adapter *adap, struct sge_qset *qs,
2276                              int budget)
2277 {
2278         struct sge_rspq *q = &qs->rspq;
2279         struct rsp_desc *r = &q->desc[q->cidx];
2280         int budget_left = budget;
2281         unsigned int sleeping = 0;
2282         struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
2283         int ngathered = 0;
2284
2285         q->next_holdoff = q->holdoff_tmr;
2286
2287         while (likely(budget_left && is_new_response(r, q))) {
2288                 int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
2289                 struct sk_buff *skb = NULL;
2290                 u32 len, flags;
2291                 __be32 rss_hi, rss_lo;
2292
2293                 rmb();
2294                 eth = r->rss_hdr.opcode == CPL_RX_PKT;
2295                 rss_hi = *(const __be32 *)r;
2296                 rss_lo = r->rss_hdr.rss_hash_val;
2297                 flags = ntohl(r->flags);
2298
2299                 if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
2300                         skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
2301                         if (!skb)
2302                                 goto no_mem;
2303
2304                         memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
2305                         skb->data[0] = CPL_ASYNC_NOTIF;
2306                         rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
2307                         q->async_notif++;
2308                 } else if (flags & F_RSPD_IMM_DATA_VALID) {
2309                         skb = get_imm_packet(r);
2310                         if (unlikely(!skb)) {
2311 no_mem:
2312                                 q->next_holdoff = NOMEM_INTR_DELAY;
2313                                 q->nomem++;
2314                                 /* consume one credit since we tried */
2315                                 budget_left--;
2316                                 break;
2317                         }
2318                         q->imm_data++;
2319                         ethpad = 0;
2320                 } else if ((len = ntohl(r->len_cq)) != 0) {
2321                         struct sge_fl *fl;
2322
2323                         lro &= eth && is_eth_tcp(rss_hi);
2324
2325                         fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
2326                         if (fl->use_pages) {
2327                                 void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
2328
2329                                 prefetch(addr);
2330 #if L1_CACHE_BYTES < 128
2331                                 prefetch(addr + L1_CACHE_BYTES);
2332 #endif
2333                                 __refill_fl(adap, fl);
2334                                 if (lro > 0) {
2335                                         lro_add_page(adap, qs, fl,
2336                                                      G_RSPD_LEN(len),
2337                                                      flags & F_RSPD_EOP);
2338                                          goto next_fl;
2339                                 }
2340
2341                                 skb = get_packet_pg(adap, fl, q,
2342                                                     G_RSPD_LEN(len),
2343                                                     eth ?
2344                                                     SGE_RX_DROP_THRES : 0);
2345                                 q->pg_skb = skb;
2346                         } else
2347                                 skb = get_packet(adap, fl, G_RSPD_LEN(len),
2348                                                  eth ? SGE_RX_DROP_THRES : 0);
2349                         if (unlikely(!skb)) {
2350                                 if (!eth)
2351                                         goto no_mem;
2352                                 q->rx_drops++;
2353                         } else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
2354                                 __skb_pull(skb, 2);
2355 next_fl:
2356                         if (++fl->cidx == fl->size)
2357                                 fl->cidx = 0;
2358                 } else
2359                         q->pure_rsps++;
2360
2361                 if (flags & RSPD_CTRL_MASK) {
2362                         sleeping |= flags & RSPD_GTS_MASK;
2363                         handle_rsp_cntrl_info(qs, flags);
2364                 }
2365
2366                 r++;
2367                 if (unlikely(++q->cidx == q->size)) {
2368                         q->cidx = 0;
2369                         q->gen ^= 1;
2370                         r = q->desc;
2371                 }
2372                 prefetch(r);
2373
2374                 if (++q->credits >= (q->size / 4)) {
2375                         refill_rspq(adap, q, q->credits);
2376                         q->credits = 0;
2377                 }
2378
2379                 packet_complete = flags &
2380                                   (F_RSPD_EOP | F_RSPD_IMM_DATA_VALID |
2381                                    F_RSPD_ASYNC_NOTIF);
2382
2383                 if (skb != NULL && packet_complete) {
2384                         if (eth)
2385                                 rx_eth(adap, q, skb, ethpad, lro);
2386                         else {
2387                                 q->offload_pkts++;
2388                                 /* Preserve the RSS info in csum & priority */
2389                                 skb->csum = rss_hi;
2390                                 skb->priority = rss_lo;
2391                                 ngathered = rx_offload(&adap->tdev, q, skb,
2392                                                        offload_skbs,
2393                                                        ngathered);
2394                         }
2395
2396                         if (flags & F_RSPD_EOP)
2397                                 clear_rspq_bufstate(q);
2398                 }
2399                 --budget_left;
2400         }
2401
2402         deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
2403
2404         if (sleeping)
2405                 check_ring_db(adap, qs, sleeping);
2406
2407         smp_mb();               /* commit Tx queue .processed updates */
2408         if (unlikely(qs->txq_stopped != 0))
2409                 restart_tx(qs);
2410
2411         budget -= budget_left;
2412         return budget;
2413 }
2414
2415 static inline int is_pure_response(const struct rsp_desc *r)
2416 {
2417         __be32 n = r->flags & htonl(F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
2418
2419         return (n | r->len_cq) == 0;
2420 }
2421
2422 /**
2423  *      napi_rx_handler - the NAPI handler for Rx processing
2424  *      @napi: the napi instance
2425  *      @budget: how many packets we can process in this round
2426  *
2427  *      Handler for new data events when using NAPI.
2428  */
2429 static int napi_rx_handler(struct napi_struct *napi, int budget)
2430 {
2431         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
2432         struct adapter *adap = qs->adap;
2433         int work_done = process_responses(adap, qs, budget);
2434
2435         if (likely(work_done < budget)) {
2436                 napi_complete(napi);
2437
2438                 /*
2439                  * Because we don't atomically flush the following
2440                  * write it is possible that in very rare cases it can
2441                  * reach the device in a way that races with a new
2442                  * response being written plus an error interrupt
2443                  * causing the NAPI interrupt handler below to return
2444                  * unhandled status to the OS.  To protect against
2445                  * this would require flushing the write and doing
2446                  * both the write and the flush with interrupts off.
2447                  * Way too expensive and unjustifiable given the
2448                  * rarity of the race.
2449                  *
2450                  * The race cannot happen at all with MSI-X.
2451                  */
2452                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
2453                              V_NEWTIMER(qs->rspq.next_holdoff) |
2454                              V_NEWINDEX(qs->rspq.cidx));
2455         }
2456         return work_done;
2457 }
2458
2459 /*
2460  * Returns true if the device is already scheduled for polling.
2461  */
2462 static inline int napi_is_scheduled(struct napi_struct *napi)
2463 {
2464         return test_bit(NAPI_STATE_SCHED, &napi->state);
2465 }
2466
2467 /**
2468  *      process_pure_responses - process pure responses from a response queue
2469  *      @adap: the adapter
2470  *      @qs: the queue set owning the response queue
2471  *      @r: the first pure response to process
2472  *
2473  *      A simpler version of process_responses() that handles only pure (i.e.,
2474  *      non data-carrying) responses.  Such respones are too light-weight to
2475  *      justify calling a softirq under NAPI, so we handle them specially in
2476  *      the interrupt handler.  The function is called with a pointer to a
2477  *      response, which the caller must ensure is a valid pure response.
2478  *
2479  *      Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
2480  */
2481 static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
2482                                   struct rsp_desc *r)
2483 {
2484         struct sge_rspq *q = &qs->rspq;
2485         unsigned int sleeping = 0;
2486
2487         do {
2488                 u32 flags = ntohl(r->flags);
2489
2490                 r++;
2491                 if (unlikely(++q->cidx == q->size)) {
2492                         q->cidx = 0;
2493                         q->gen ^= 1;
2494                         r = q->desc;
2495                 }
2496                 prefetch(r);
2497
2498                 if (flags & RSPD_CTRL_MASK) {
2499                         sleeping |= flags & RSPD_GTS_MASK;
2500                         handle_rsp_cntrl_info(qs, flags);
2501                 }
2502
2503                 q->pure_rsps++;
2504                 if (++q->credits >= (q->size / 4)) {
2505                         refill_rspq(adap, q, q->credits);
2506                         q->credits = 0;
2507                 }
2508                 if (!is_new_response(r, q))
2509                         break;
2510                 rmb();
2511         } while (is_pure_response(r));
2512
2513         if (sleeping)
2514                 check_ring_db(adap, qs, sleeping);
2515
2516         smp_mb();               /* commit Tx queue .processed updates */
2517         if (unlikely(qs->txq_stopped != 0))
2518                 restart_tx(qs);
2519
2520         return is_new_response(r, q);
2521 }
2522
2523 /**
2524  *      handle_responses - decide what to do with new responses in NAPI mode
2525  *      @adap: the adapter
2526  *      @q: the response queue
2527  *
2528  *      This is used by the NAPI interrupt handlers to decide what to do with
2529  *      new SGE responses.  If there are no new responses it returns -1.  If
2530  *      there are new responses and they are pure (i.e., non-data carrying)
2531  *      it handles them straight in hard interrupt context as they are very
2532  *      cheap and don't deliver any packets.  Finally, if there are any data
2533  *      signaling responses it schedules the NAPI handler.  Returns 1 if it
2534  *      schedules NAPI, 0 if all new responses were pure.
2535  *
2536  *      The caller must ascertain NAPI is not already running.
2537  */
2538 static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
2539 {
2540         struct sge_qset *qs = rspq_to_qset(q);
2541         struct rsp_desc *r = &q->desc[q->cidx];
2542
2543         if (!is_new_response(r, q))
2544                 return -1;
2545         rmb();
2546         if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
2547                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2548                              V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
2549                 return 0;
2550         }
2551         napi_schedule(&qs->napi);
2552         return 1;
2553 }
2554
2555 /*
2556  * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
2557  * (i.e., response queue serviced in hard interrupt).
2558  */
2559 irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
2560 {
2561         struct sge_qset *qs = cookie;
2562         struct adapter *adap = qs->adap;
2563         struct sge_rspq *q = &qs->rspq;
2564
2565         spin_lock(&q->lock);
2566         if (process_responses(adap, qs, -1) == 0)
2567                 q->unhandled_irqs++;
2568         t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2569                      V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2570         spin_unlock(&q->lock);
2571         return IRQ_HANDLED;
2572 }
2573
2574 /*
2575  * The MSI-X interrupt handler for an SGE response queue for the NAPI case
2576  * (i.e., response queue serviced by NAPI polling).
2577  */
2578 static irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
2579 {
2580         struct sge_qset *qs = cookie;
2581         struct sge_rspq *q = &qs->rspq;
2582
2583         spin_lock(&q->lock);
2584
2585         if (handle_responses(qs->adap, q) < 0)
2586                 q->unhandled_irqs++;
2587         spin_unlock(&q->lock);
2588         return IRQ_HANDLED;
2589 }
2590
2591 /*
2592  * The non-NAPI MSI interrupt handler.  This needs to handle data events from
2593  * SGE response queues as well as error and other async events as they all use
2594  * the same MSI vector.  We use one SGE response queue per port in this mode
2595  * and protect all response queues with queue 0's lock.
2596  */
2597 static irqreturn_t t3_intr_msi(int irq, void *cookie)
2598 {
2599         int new_packets = 0;
2600         struct adapter *adap = cookie;
2601         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2602
2603         spin_lock(&q->lock);
2604
2605         if (process_responses(adap, &adap->sge.qs[0], -1)) {
2606                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2607                              V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2608                 new_packets = 1;
2609         }
2610
2611         if (adap->params.nports == 2 &&
2612             process_responses(adap, &adap->sge.qs[1], -1)) {
2613                 struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2614
2615                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
2616                              V_NEWTIMER(q1->next_holdoff) |
2617                              V_NEWINDEX(q1->cidx));
2618                 new_packets = 1;
2619         }
2620
2621         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2622                 q->unhandled_irqs++;
2623
2624         spin_unlock(&q->lock);
2625         return IRQ_HANDLED;
2626 }
2627
2628 static int rspq_check_napi(struct sge_qset *qs)
2629 {
2630         struct sge_rspq *q = &qs->rspq;
2631
2632         if (!napi_is_scheduled(&qs->napi) &&
2633             is_new_response(&q->desc[q->cidx], q)) {
2634                 napi_schedule(&qs->napi);
2635                 return 1;
2636         }
2637         return 0;
2638 }
2639
2640 /*
2641  * The MSI interrupt handler for the NAPI case (i.e., response queues serviced
2642  * by NAPI polling).  Handles data events from SGE response queues as well as
2643  * error and other async events as they all use the same MSI vector.  We use
2644  * one SGE response queue per port in this mode and protect all response
2645  * queues with queue 0's lock.
2646  */
2647 static irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
2648 {
2649         int new_packets;
2650         struct adapter *adap = cookie;
2651         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2652
2653         spin_lock(&q->lock);
2654
2655         new_packets = rspq_check_napi(&adap->sge.qs[0]);
2656         if (adap->params.nports == 2)
2657                 new_packets += rspq_check_napi(&adap->sge.qs[1]);
2658         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2659                 q->unhandled_irqs++;
2660
2661         spin_unlock(&q->lock);
2662         return IRQ_HANDLED;
2663 }
2664
2665 /*
2666  * A helper function that processes responses and issues GTS.
2667  */
2668 static inline int process_responses_gts(struct adapter *adap,
2669                                         struct sge_rspq *rq)
2670 {
2671         int work;
2672
2673         work = process_responses(adap, rspq_to_qset(rq), -1);
2674         t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
2675                      V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
2676         return work;
2677 }
2678
2679 /*
2680  * The legacy INTx interrupt handler.  This needs to handle data events from
2681  * SGE response queues as well as error and other async events as they all use
2682  * the same interrupt pin.  We use one SGE response queue per port in this mode
2683  * and protect all response queues with queue 0's lock.
2684  */
2685 static irqreturn_t t3_intr(int irq, void *cookie)
2686 {
2687         int work_done, w0, w1;
2688         struct adapter *adap = cookie;
2689         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2690         struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2691
2692         spin_lock(&q0->lock);
2693
2694         w0 = is_new_response(&q0->desc[q0->cidx], q0);
2695         w1 = adap->params.nports == 2 &&
2696             is_new_response(&q1->desc[q1->cidx], q1);
2697
2698         if (likely(w0 | w1)) {
2699                 t3_write_reg(adap, A_PL_CLI, 0);
2700                 t3_read_reg(adap, A_PL_CLI);    /* flush */
2701
2702                 if (likely(w0))
2703                         process_responses_gts(adap, q0);
2704
2705                 if (w1)
2706                         process_responses_gts(adap, q1);
2707
2708                 work_done = w0 | w1;
2709         } else
2710                 work_done = t3_slow_intr_handler(adap);
2711
2712         spin_unlock(&q0->lock);
2713         return IRQ_RETVAL(work_done != 0);
2714 }
2715
2716 /*
2717  * Interrupt handler for legacy INTx interrupts for T3B-based cards.
2718  * Handles data events from SGE response queues as well as error and other
2719  * async events as they all use the same interrupt pin.  We use one SGE
2720  * response queue per port in this mode and protect all response queues with
2721  * queue 0's lock.
2722  */
2723 static irqreturn_t t3b_intr(int irq, void *cookie)
2724 {
2725         u32 map;
2726         struct adapter *adap = cookie;
2727         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2728
2729         t3_write_reg(adap, A_PL_CLI, 0);
2730         map = t3_read_reg(adap, A_SG_DATA_INTR);
2731
2732         if (unlikely(!map))     /* shared interrupt, most likely */
2733                 return IRQ_NONE;
2734
2735         spin_lock(&q0->lock);
2736
2737         if (unlikely(map & F_ERRINTR))
2738                 t3_slow_intr_handler(adap);
2739
2740         if (likely(map & 1))
2741                 process_responses_gts(adap, q0);
2742
2743         if (map & 2)
2744                 process_responses_gts(adap, &adap->sge.qs[1].rspq);
2745
2746         spin_unlock(&q0->lock);
2747         return IRQ_HANDLED;
2748 }
2749
2750 /*
2751  * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
2752  * Handles data events from SGE response queues as well as error and other
2753  * async events as they all use the same interrupt pin.  We use one SGE
2754  * response queue per port in this mode and protect all response queues with
2755  * queue 0's lock.
2756  */
2757 static irqreturn_t t3b_intr_napi(int irq, void *cookie)
2758 {
2759         u32 map;
2760         struct adapter *adap = cookie;
2761         struct sge_qset *qs0 = &adap->sge.qs[0];
2762         struct sge_rspq *q0 = &qs0->rspq;
2763
2764         t3_write_reg(adap, A_PL_CLI, 0);
2765         map = t3_read_reg(adap, A_SG_DATA_INTR);
2766
2767         if (unlikely(!map))     /* shared interrupt, most likely */
2768                 return IRQ_NONE;
2769
2770         spin_lock(&q0->lock);
2771
2772         if (unlikely(map & F_ERRINTR))
2773                 t3_slow_intr_handler(adap);
2774
2775         if (likely(map & 1))
2776                 napi_schedule(&qs0->napi);
2777
2778         if (map & 2)
2779                 napi_schedule(&adap->sge.qs[1].napi);
2780
2781         spin_unlock(&q0->lock);
2782         return IRQ_HANDLED;
2783 }
2784
2785 /**
2786  *      t3_intr_handler - select the top-level interrupt handler
2787  *      @adap: the adapter
2788  *      @polling: whether using NAPI to service response queues
2789  *
2790  *      Selects the top-level interrupt handler based on the type of interrupts
2791  *      (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
2792  *      response queues.
2793  */
2794 irq_handler_t t3_intr_handler(struct adapter *adap, int polling)
2795 {
2796         if (adap->flags & USING_MSIX)
2797                 return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
2798         if (adap->flags & USING_MSI)
2799                 return polling ? t3_intr_msi_napi : t3_intr_msi;
2800         if (adap->params.rev > 0)
2801                 return polling ? t3b_intr_napi : t3b_intr;
2802         return t3_intr;
2803 }
2804
2805 #define SGE_PARERR (F_CPPARITYERROR | F_OCPARITYERROR | F_RCPARITYERROR | \
2806                     F_IRPARITYERROR | V_ITPARITYERROR(M_ITPARITYERROR) | \
2807                     V_FLPARITYERROR(M_FLPARITYERROR) | F_LODRBPARITYERROR | \
2808                     F_HIDRBPARITYERROR | F_LORCQPARITYERROR | \
2809                     F_HIRCQPARITYERROR)
2810 #define SGE_FRAMINGERR (F_UC_REQ_FRAMINGERROR | F_R_REQ_FRAMINGERROR)
2811 #define SGE_FATALERR (SGE_PARERR | SGE_FRAMINGERR | F_RSPQCREDITOVERFOW | \
2812                       F_RSPQDISABLED)
2813
2814 /**
2815  *      t3_sge_err_intr_handler - SGE async event interrupt handler
2816  *      @adapter: the adapter
2817  *
2818  *      Interrupt handler for SGE asynchronous (non-data) events.
2819  */
2820 void t3_sge_err_intr_handler(struct adapter *adapter)
2821 {
2822         unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE) &
2823                                  ~F_FLEMPTY;
2824
2825         if (status & SGE_PARERR)
2826                 CH_ALERT(adapter, "SGE parity error (0x%x)\n",
2827                          status & SGE_PARERR);
2828         if (status & SGE_FRAMINGERR)
2829                 CH_ALERT(adapter, "SGE framing error (0x%x)\n",
2830                          status & SGE_FRAMINGERR);
2831
2832         if (status & F_RSPQCREDITOVERFOW)
2833                 CH_ALERT(adapter, "SGE response queue credit overflow\n");
2834
2835         if (status & F_RSPQDISABLED) {
2836                 v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
2837
2838                 CH_ALERT(adapter,
2839                          "packet delivered to disabled response queue "
2840                          "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
2841         }
2842
2843         if (status & (F_HIPIODRBDROPERR | F_LOPIODRBDROPERR))
2844                 CH_ALERT(adapter, "SGE dropped %s priority doorbell\n",
2845                          status & F_HIPIODRBDROPERR ? "high" : "lo");
2846
2847         t3_write_reg(adapter, A_SG_INT_CAUSE, status);
2848         if (status &  SGE_FATALERR)
2849                 t3_fatal_err(adapter);
2850 }
2851
2852 /**
2853  *      sge_timer_tx - perform periodic maintenance of an SGE qset
2854  *      @data: the SGE queue set to maintain
2855  *
2856  *      Runs periodically from a timer to perform maintenance of an SGE queue
2857  *      set.  It performs two tasks:
2858  *
2859  *      Cleans up any completed Tx descriptors that may still be pending.
2860  *      Normal descriptor cleanup happens when new packets are added to a Tx
2861  *      queue so this timer is relatively infrequent and does any cleanup only
2862  *      if the Tx queue has not seen any new packets in a while.  We make a
2863  *      best effort attempt to reclaim descriptors, in that we don't wait
2864  *      around if we cannot get a queue's lock (which most likely is because
2865  *      someone else is queueing new packets and so will also handle the clean
2866  *      up).  Since control queues use immediate data exclusively we don't
2867  *      bother cleaning them up here.
2868  *
2869  */
2870 static void sge_timer_tx(unsigned long data)
2871 {
2872         struct sge_qset *qs = (struct sge_qset *)data;
2873         struct port_info *pi = netdev_priv(qs->netdev);
2874         struct adapter *adap = pi->adapter;
2875         unsigned int tbd[SGE_TXQ_PER_SET] = {0, 0};
2876         unsigned long next_period;
2877
2878         if (__netif_tx_trylock(qs->tx_q)) {
2879                 tbd[TXQ_ETH] = reclaim_completed_tx(adap, &qs->txq[TXQ_ETH],
2880                                                      TX_RECLAIM_TIMER_CHUNK);
2881                 __netif_tx_unlock(qs->tx_q);
2882         }
2883
2884         if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
2885                 tbd[TXQ_OFLD] = reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD],
2886                                                      TX_RECLAIM_TIMER_CHUNK);
2887                 spin_unlock(&qs->txq[TXQ_OFLD].lock);
2888         }
2889
2890         next_period = TX_RECLAIM_PERIOD >>
2891                       (max(tbd[TXQ_ETH], tbd[TXQ_OFLD]) /
2892                       TX_RECLAIM_TIMER_CHUNK);
2893         mod_timer(&qs->tx_reclaim_timer, jiffies + next_period);
2894 }
2895
2896 /*
2897  *      sge_timer_rx - perform periodic maintenance of an SGE qset
2898  *      @data: the SGE queue set to maintain
2899  *
2900  *      a) Replenishes Rx queues that have run out due to memory shortage.
2901  *      Normally new Rx buffers are added when existing ones are consumed but
2902  *      when out of memory a queue can become empty.  We try to add only a few
2903  *      buffers here, the queue will be replenished fully as these new buffers
2904  *      are used up if memory shortage has subsided.
2905  *
2906  *      b) Return coalesced response queue credits in case a response queue is
2907  *      starved.
2908  *
2909  */
2910 static void sge_timer_rx(unsigned long data)
2911 {
2912         spinlock_t *lock;
2913         struct sge_qset *qs = (struct sge_qset *)data;
2914         struct port_info *pi = netdev_priv(qs->netdev);
2915         struct adapter *adap = pi->adapter;
2916         u32 status;
2917
2918         lock = adap->params.rev > 0 ?
2919                &qs->rspq.lock : &adap->sge.qs[0].rspq.lock;
2920
2921         if (!spin_trylock_irq(lock))
2922                 goto out;
2923
2924         if (napi_is_scheduled(&qs->napi))
2925                 goto unlock;
2926
2927         if (adap->params.rev < 4) {
2928                 status = t3_read_reg(adap, A_SG_RSPQ_FL_STATUS);
2929
2930                 if (status & (1 << qs->rspq.cntxt_id)) {
2931                         qs->rspq.starved++;
2932                         if (qs->rspq.credits) {
2933                                 qs->rspq.credits--;
2934                                 refill_rspq(adap, &qs->rspq, 1);
2935                                 qs->rspq.restarted++;
2936                                 t3_write_reg(adap, A_SG_RSPQ_FL_STATUS,
2937                                              1 << qs->rspq.cntxt_id);
2938                         }
2939                 }
2940         }
2941
2942         if (qs->fl[0].credits < qs->fl[0].size)
2943                 __refill_fl(adap, &qs->fl[0]);
2944         if (qs->fl[1].credits < qs->fl[1].size)
2945                 __refill_fl(adap, &qs->fl[1]);
2946
2947 unlock:
2948         spin_unlock_irq(lock);
2949 out:
2950         mod_timer(&qs->rx_reclaim_timer, jiffies + RX_RECLAIM_PERIOD);
2951 }
2952
2953 /**
2954  *      t3_update_qset_coalesce - update coalescing settings for a queue set
2955  *      @qs: the SGE queue set
2956  *      @p: new queue set parameters
2957  *
2958  *      Update the coalescing settings for an SGE queue set.  Nothing is done
2959  *      if the queue set is not initialized yet.
2960  */
2961 void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
2962 {
2963         qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
2964         qs->rspq.polling = p->polling;
2965         qs->napi.poll = p->polling ? napi_rx_handler : ofld_poll;
2966 }
2967
2968 /**
2969  *      t3_sge_alloc_qset - initialize an SGE queue set
2970  *      @adapter: the adapter
2971  *      @id: the queue set id
2972  *      @nports: how many Ethernet ports will be using this queue set
2973  *      @irq_vec_idx: the IRQ vector index for response queue interrupts
2974  *      @p: configuration parameters for this queue set
2975  *      @ntxq: number of Tx queues for the queue set
2976  *      @netdev: net device associated with this queue set
2977  *      @netdevq: net device TX queue associated with this queue set
2978  *
2979  *      Allocate resources and initialize an SGE queue set.  A queue set
2980  *      comprises a response queue, two Rx free-buffer queues, and up to 3
2981  *      Tx queues.  The Tx queues are assigned roles in the order Ethernet
2982  *      queue, offload queue, and control queue.
2983  */
2984 int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
2985                       int irq_vec_idx, const struct qset_params *p,
2986                       int ntxq, struct net_device *dev,
2987                       struct netdev_queue *netdevq)
2988 {
2989         int i, avail, ret = -ENOMEM;
2990         struct sge_qset *q = &adapter->sge.qs[id];
2991
2992         init_qset_cntxt(q, id);
2993         setup_timer(&q->tx_reclaim_timer, sge_timer_tx, (unsigned long)q);
2994         setup_timer(&q->rx_reclaim_timer, sge_timer_rx, (unsigned long)q);
2995
2996         q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
2997                                    sizeof(struct rx_desc),
2998                                    sizeof(struct rx_sw_desc),
2999                                    &q->fl[0].phys_addr, &q->fl[0].sdesc);
3000         if (!q->fl[0].desc)
3001                 goto err;
3002
3003         q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
3004                                    sizeof(struct rx_desc),
3005                                    sizeof(struct rx_sw_desc),
3006                                    &q->fl[1].phys_addr, &q->fl[1].sdesc);
3007         if (!q->fl[1].desc)
3008                 goto err;
3009
3010         q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
3011                                   sizeof(struct rsp_desc), 0,
3012                                   &q->rspq.phys_addr, NULL);
3013         if (!q->rspq.desc)
3014                 goto err;
3015
3016         for (i = 0; i < ntxq; ++i) {
3017                 /*
3018                  * The control queue always uses immediate data so does not
3019                  * need to keep track of any sk_buffs.
3020                  */
3021                 size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
3022
3023                 q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
3024                                             sizeof(struct tx_desc), sz,
3025                                             &q->txq[i].phys_addr,
3026                                             &q->txq[i].sdesc);
3027                 if (!q->txq[i].desc)
3028                         goto err;
3029
3030                 q->txq[i].gen = 1;
3031                 q->txq[i].size = p->txq_size[i];
3032                 spin_lock_init(&q->txq[i].lock);
3033                 skb_queue_head_init(&q->txq[i].sendq);
3034         }
3035
3036         tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
3037                      (unsigned long)q);
3038         tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
3039                      (unsigned long)q);
3040
3041         q->fl[0].gen = q->fl[1].gen = 1;
3042         q->fl[0].size = p->fl_size;
3043         q->fl[1].size = p->jumbo_size;
3044
3045         q->rspq.gen = 1;
3046         q->rspq.size = p->rspq_size;
3047         spin_lock_init(&q->rspq.lock);
3048         skb_queue_head_init(&q->rspq.rx_queue);
3049
3050         q->txq[TXQ_ETH].stop_thres = nports *
3051             flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
3052
3053 #if FL0_PG_CHUNK_SIZE > 0
3054         q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
3055 #else
3056         q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
3057 #endif
3058 #if FL1_PG_CHUNK_SIZE > 0
3059         q->fl[1].buf_size = FL1_PG_CHUNK_SIZE;
3060 #else
3061         q->fl[1].buf_size = is_offload(adapter) ?
3062                 (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
3063                 MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
3064 #endif
3065
3066         q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
3067         q->fl[1].use_pages = FL1_PG_CHUNK_SIZE > 0;
3068         q->fl[0].order = FL0_PG_ORDER;
3069         q->fl[1].order = FL1_PG_ORDER;
3070         q->fl[0].alloc_size = FL0_PG_ALLOC_SIZE;
3071         q->fl[1].alloc_size = FL1_PG_ALLOC_SIZE;
3072
3073         spin_lock_irq(&adapter->sge.reg_lock);
3074
3075         /* FL threshold comparison uses < */
3076         ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
3077                                    q->rspq.phys_addr, q->rspq.size,
3078                                    q->fl[0].buf_size - SGE_PG_RSVD, 1, 0);
3079         if (ret)
3080                 goto err_unlock;
3081
3082         for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
3083                 ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
3084                                           q->fl[i].phys_addr, q->fl[i].size,
3085                                           q->fl[i].buf_size - SGE_PG_RSVD,
3086                                           p->cong_thres, 1, 0);
3087                 if (ret)
3088                         goto err_unlock;
3089         }
3090
3091         ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
3092                                  SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
3093                                  q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
3094                                  1, 0);
3095         if (ret)
3096                 goto err_unlock;
3097
3098         if (ntxq > 1) {
3099                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
3100                                          USE_GTS, SGE_CNTXT_OFLD, id,
3101                                          q->txq[TXQ_OFLD].phys_addr,
3102                                          q->txq[TXQ_OFLD].size, 0, 1, 0);
3103                 if (ret)
3104                         goto err_unlock;
3105         }
3106
3107         if (ntxq > 2) {
3108                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
3109                                          SGE_CNTXT_CTRL, id,
3110                                          q->txq[TXQ_CTRL].phys_addr,
3111                                          q->txq[TXQ_CTRL].size,
3112                                          q->txq[TXQ_CTRL].token, 1, 0);
3113                 if (ret)
3114                         goto err_unlock;
3115         }
3116
3117         spin_unlock_irq(&adapter->sge.reg_lock);
3118
3119         q->adap = adapter;
3120         q->netdev = dev;
3121         q->tx_q = netdevq;
3122         t3_update_qset_coalesce(q, p);
3123
3124         avail = refill_fl(adapter, &q->fl[0], q->fl[0].size,
3125                           GFP_KERNEL | __GFP_COMP);
3126         if (!avail) {
3127                 CH_ALERT(adapter, "free list queue 0 initialization failed\n");
3128                 goto err;
3129         }
3130         if (avail < q->fl[0].size)
3131                 CH_WARN(adapter, "free list queue 0 enabled with %d credits\n",
3132                         avail);
3133
3134         avail = refill_fl(adapter, &q->fl[1], q->fl[1].size,
3135                           GFP_KERNEL | __GFP_COMP);
3136         if (avail < q->fl[1].size)
3137                 CH_WARN(adapter, "free list queue 1 enabled with %d credits\n",
3138                         avail);
3139         refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
3140
3141         t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
3142                      V_NEWTIMER(q->rspq.holdoff_tmr));
3143
3144         return 0;
3145
3146 err_unlock:
3147         spin_unlock_irq(&adapter->sge.reg_lock);
3148 err:
3149         t3_free_qset(adapter, q);
3150         return ret;
3151 }
3152
3153 /**
3154  *      t3_start_sge_timers - start SGE timer call backs
3155  *      @adap: the adapter
3156  *
3157  *      Starts each SGE queue set's timer call back
3158  */
3159 void t3_start_sge_timers(struct adapter *adap)
3160 {
3161         int i;
3162
3163         for (i = 0; i < SGE_QSETS; ++i) {
3164                 struct sge_qset *q = &adap->sge.qs[i];
3165
3166         if (q->tx_reclaim_timer.function)
3167                 mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
3168
3169         if (q->rx_reclaim_timer.function)
3170                 mod_timer(&q->rx_reclaim_timer, jiffies + RX_RECLAIM_PERIOD);
3171         }
3172 }
3173
3174 /**
3175  *      t3_stop_sge_timers - stop SGE timer call backs
3176  *      @adap: the adapter
3177  *
3178  *      Stops each SGE queue set's timer call back
3179  */
3180 void t3_stop_sge_timers(struct adapter *adap)
3181 {
3182         int i;
3183
3184         for (i = 0; i < SGE_QSETS; ++i) {
3185                 struct sge_qset *q = &adap->sge.qs[i];
3186
3187                 if (q->tx_reclaim_timer.function)
3188                         del_timer_sync(&q->tx_reclaim_timer);
3189                 if (q->rx_reclaim_timer.function)
3190                         del_timer_sync(&q->rx_reclaim_timer);
3191         }
3192 }
3193
3194 /**
3195  *      t3_free_sge_resources - free SGE resources
3196  *      @adap: the adapter
3197  *
3198  *      Frees resources used by the SGE queue sets.
3199  */
3200 void t3_free_sge_resources(struct adapter *adap)
3201 {
3202         int i;
3203
3204         for (i = 0; i < SGE_QSETS; ++i)
3205                 t3_free_qset(adap, &adap->sge.qs[i]);
3206 }
3207
3208 /**
3209  *      t3_sge_start - enable SGE
3210  *      @adap: the adapter
3211  *
3212  *      Enables the SGE for DMAs.  This is the last step in starting packet
3213  *      transfers.
3214  */
3215 void t3_sge_start(struct adapter *adap)
3216 {
3217         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
3218 }
3219
3220 /**
3221  *      t3_sge_stop - disable SGE operation
3222  *      @adap: the adapter
3223  *
3224  *      Disables the DMA engine.  This can be called in emeregencies (e.g.,
3225  *      from error interrupts) or from normal process context.  In the latter
3226  *      case it also disables any pending queue restart tasklets.  Note that
3227  *      if it is called in interrupt context it cannot disable the restart
3228  *      tasklets as it cannot wait, however the tasklets will have no effect
3229  *      since the doorbells are disabled and the driver will call this again
3230  *      later from process context, at which time the tasklets will be stopped
3231  *      if they are still running.
3232  */
3233 void t3_sge_stop(struct adapter *adap)
3234 {
3235         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
3236         if (!in_interrupt()) {
3237                 int i;
3238
3239                 for (i = 0; i < SGE_QSETS; ++i) {
3240                         struct sge_qset *qs = &adap->sge.qs[i];
3241
3242                         tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
3243                         tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
3244                 }
3245         }
3246 }
3247
3248 /**
3249  *      t3_sge_init - initialize SGE
3250  *      @adap: the adapter
3251  *      @p: the SGE parameters
3252  *
3253  *      Performs SGE initialization needed every time after a chip reset.
3254  *      We do not initialize any of the queue sets here, instead the driver
3255  *      top-level must request those individually.  We also do not enable DMA
3256  *      here, that should be done after the queues have been set up.
3257  */
3258 void t3_sge_init(struct adapter *adap, struct sge_params *p)
3259 {
3260         unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
3261
3262         ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
3263             F_CQCRDTCTRL | F_CONGMODE | F_TNLFLMODE | F_FATLPERREN |
3264             V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
3265             V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
3266 #if SGE_NUM_GENBITS == 1
3267         ctrl |= F_EGRGENCTRL;
3268 #endif
3269         if (adap->params.rev > 0) {
3270                 if (!(adap->flags & (USING_MSIX | USING_MSI)))
3271                         ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
3272         }
3273         t3_write_reg(adap, A_SG_CONTROL, ctrl);
3274         t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
3275                      V_LORCQDRBTHRSH(512));
3276         t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
3277         t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
3278                      V_TIMEOUT(200 * core_ticks_per_usec(adap)));
3279         t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH,
3280                      adap->params.rev < T3_REV_C ? 1000 : 500);
3281         t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
3282         t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
3283         t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
3284         t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
3285         t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
3286 }
3287
3288 /**
3289  *      t3_sge_prep - one-time SGE initialization
3290  *      @adap: the associated adapter
3291  *      @p: SGE parameters
3292  *
3293  *      Performs one-time initialization of SGE SW state.  Includes determining
3294  *      defaults for the assorted SGE parameters, which admins can change until
3295  *      they are used to initialize the SGE.
3296  */
3297 void t3_sge_prep(struct adapter *adap, struct sge_params *p)
3298 {
3299         int i;
3300
3301         p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
3302             SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
3303
3304         for (i = 0; i < SGE_QSETS; ++i) {
3305                 struct qset_params *q = p->qset + i;
3306
3307                 q->polling = adap->params.rev > 0;
3308                 q->coalesce_usecs = 5;
3309                 q->rspq_size = 1024;
3310                 q->fl_size = 1024;
3311                 q->jumbo_size = 512;
3312                 q->txq_size[TXQ_ETH] = 1024;
3313                 q->txq_size[TXQ_OFLD] = 1024;
3314                 q->txq_size[TXQ_CTRL] = 256;
3315                 q->cong_thres = 0;
3316         }
3317
3318         spin_lock_init(&adap->sge.reg_lock);
3319 }
3320
3321 /**
3322  *      t3_get_desc - dump an SGE descriptor for debugging purposes
3323  *      @qs: the queue set
3324  *      @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
3325  *      @idx: the descriptor index in the queue
3326  *      @data: where to dump the descriptor contents
3327  *
3328  *      Dumps the contents of a HW descriptor of an SGE queue.  Returns the
3329  *      size of the descriptor.
3330  */
3331 int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
3332                 unsigned char *data)
3333 {
3334         if (qnum >= 6)
3335                 return -EINVAL;
3336
3337         if (qnum < 3) {
3338                 if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
3339                         return -EINVAL;
3340                 memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
3341                 return sizeof(struct tx_desc);
3342         }
3343
3344         if (qnum == 3) {
3345                 if (!qs->rspq.desc || idx >= qs->rspq.size)
3346                         return -EINVAL;
3347                 memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
3348                 return sizeof(struct rsp_desc);
3349         }
3350
3351         qnum -= 4;
3352         if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
3353                 return -EINVAL;
3354         memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
3355         return sizeof(struct rx_desc);
3356 }