sdhci: move pci stuff to separate module
[safe/jmp/linux-2.6] / drivers / mmc / host / sdhci.h
1 /*
2  *  linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
3  *
4  *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or (at
9  * your option) any later version.
10  */
11
12 /*
13  * Controller registers
14  */
15
16 #define SDHCI_DMA_ADDRESS       0x00
17
18 #define SDHCI_BLOCK_SIZE        0x04
19 #define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
20
21 #define SDHCI_BLOCK_COUNT       0x06
22
23 #define SDHCI_ARGUMENT          0x08
24
25 #define SDHCI_TRANSFER_MODE     0x0C
26 #define  SDHCI_TRNS_DMA         0x01
27 #define  SDHCI_TRNS_BLK_CNT_EN  0x02
28 #define  SDHCI_TRNS_ACMD12      0x04
29 #define  SDHCI_TRNS_READ        0x10
30 #define  SDHCI_TRNS_MULTI       0x20
31
32 #define SDHCI_COMMAND           0x0E
33 #define  SDHCI_CMD_RESP_MASK    0x03
34 #define  SDHCI_CMD_CRC          0x08
35 #define  SDHCI_CMD_INDEX        0x10
36 #define  SDHCI_CMD_DATA         0x20
37
38 #define  SDHCI_CMD_RESP_NONE    0x00
39 #define  SDHCI_CMD_RESP_LONG    0x01
40 #define  SDHCI_CMD_RESP_SHORT   0x02
41 #define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
42
43 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
44
45 #define SDHCI_RESPONSE          0x10
46
47 #define SDHCI_BUFFER            0x20
48
49 #define SDHCI_PRESENT_STATE     0x24
50 #define  SDHCI_CMD_INHIBIT      0x00000001
51 #define  SDHCI_DATA_INHIBIT     0x00000002
52 #define  SDHCI_DOING_WRITE      0x00000100
53 #define  SDHCI_DOING_READ       0x00000200
54 #define  SDHCI_SPACE_AVAILABLE  0x00000400
55 #define  SDHCI_DATA_AVAILABLE   0x00000800
56 #define  SDHCI_CARD_PRESENT     0x00010000
57 #define  SDHCI_WRITE_PROTECT    0x00080000
58
59 #define SDHCI_HOST_CONTROL      0x28
60 #define  SDHCI_CTRL_LED         0x01
61 #define  SDHCI_CTRL_4BITBUS     0x02
62 #define  SDHCI_CTRL_HISPD       0x04
63
64 #define SDHCI_POWER_CONTROL     0x29
65 #define  SDHCI_POWER_ON         0x01
66 #define  SDHCI_POWER_180        0x0A
67 #define  SDHCI_POWER_300        0x0C
68 #define  SDHCI_POWER_330        0x0E
69
70 #define SDHCI_BLOCK_GAP_CONTROL 0x2A
71
72 #define SDHCI_WAKE_UP_CONTROL   0x2B
73
74 #define SDHCI_CLOCK_CONTROL     0x2C
75 #define  SDHCI_DIVIDER_SHIFT    8
76 #define  SDHCI_CLOCK_CARD_EN    0x0004
77 #define  SDHCI_CLOCK_INT_STABLE 0x0002
78 #define  SDHCI_CLOCK_INT_EN     0x0001
79
80 #define SDHCI_TIMEOUT_CONTROL   0x2E
81
82 #define SDHCI_SOFTWARE_RESET    0x2F
83 #define  SDHCI_RESET_ALL        0x01
84 #define  SDHCI_RESET_CMD        0x02
85 #define  SDHCI_RESET_DATA       0x04
86
87 #define SDHCI_INT_STATUS        0x30
88 #define SDHCI_INT_ENABLE        0x34
89 #define SDHCI_SIGNAL_ENABLE     0x38
90 #define  SDHCI_INT_RESPONSE     0x00000001
91 #define  SDHCI_INT_DATA_END     0x00000002
92 #define  SDHCI_INT_DMA_END      0x00000008
93 #define  SDHCI_INT_SPACE_AVAIL  0x00000010
94 #define  SDHCI_INT_DATA_AVAIL   0x00000020
95 #define  SDHCI_INT_CARD_INSERT  0x00000040
96 #define  SDHCI_INT_CARD_REMOVE  0x00000080
97 #define  SDHCI_INT_CARD_INT     0x00000100
98 #define  SDHCI_INT_ERROR        0x00008000
99 #define  SDHCI_INT_TIMEOUT      0x00010000
100 #define  SDHCI_INT_CRC          0x00020000
101 #define  SDHCI_INT_END_BIT      0x00040000
102 #define  SDHCI_INT_INDEX        0x00080000
103 #define  SDHCI_INT_DATA_TIMEOUT 0x00100000
104 #define  SDHCI_INT_DATA_CRC     0x00200000
105 #define  SDHCI_INT_DATA_END_BIT 0x00400000
106 #define  SDHCI_INT_BUS_POWER    0x00800000
107 #define  SDHCI_INT_ACMD12ERR    0x01000000
108
109 #define  SDHCI_INT_NORMAL_MASK  0x00007FFF
110 #define  SDHCI_INT_ERROR_MASK   0xFFFF8000
111
112 #define  SDHCI_INT_CMD_MASK     (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
113                 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
114 #define  SDHCI_INT_DATA_MASK    (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
115                 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
116                 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
117                 SDHCI_INT_DATA_END_BIT)
118
119 #define SDHCI_ACMD12_ERR        0x3C
120
121 /* 3E-3F reserved */
122
123 #define SDHCI_CAPABILITIES      0x40
124 #define  SDHCI_TIMEOUT_CLK_MASK 0x0000003F
125 #define  SDHCI_TIMEOUT_CLK_SHIFT 0
126 #define  SDHCI_TIMEOUT_CLK_UNIT 0x00000080
127 #define  SDHCI_CLOCK_BASE_MASK  0x00003F00
128 #define  SDHCI_CLOCK_BASE_SHIFT 8
129 #define  SDHCI_MAX_BLOCK_MASK   0x00030000
130 #define  SDHCI_MAX_BLOCK_SHIFT  16
131 #define  SDHCI_CAN_DO_HISPD     0x00200000
132 #define  SDHCI_CAN_DO_DMA       0x00400000
133 #define  SDHCI_CAN_VDD_330      0x01000000
134 #define  SDHCI_CAN_VDD_300      0x02000000
135 #define  SDHCI_CAN_VDD_180      0x04000000
136
137 /* 44-47 reserved for more caps */
138
139 #define SDHCI_MAX_CURRENT       0x48
140
141 /* 4C-4F reserved for more max current */
142
143 /* 50-FB reserved */
144
145 #define SDHCI_SLOT_INT_STATUS   0xFC
146
147 #define SDHCI_HOST_VERSION      0xFE
148 #define  SDHCI_VENDOR_VER_MASK  0xFF00
149 #define  SDHCI_VENDOR_VER_SHIFT 8
150 #define  SDHCI_SPEC_VER_MASK    0x00FF
151 #define  SDHCI_SPEC_VER_SHIFT   0
152
153 struct sdhci_ops;
154
155 struct sdhci_host {
156         /* Data set by hardware interface driver */
157         const char              *hw_name;       /* Hardware bus name */
158
159         unsigned int            quirks;         /* Deviations from spec. */
160
161 /* Controller doesn't honor resets unless we touch the clock register */
162 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET                  (1<<0)
163 /* Controller has bad caps bits, but really supports DMA */
164 #define SDHCI_QUIRK_FORCE_DMA                           (1<<1)
165 /* Controller doesn't like to be reset when there is no card inserted. */
166 #define SDHCI_QUIRK_NO_CARD_NO_RESET                    (1<<2)
167 /* Controller doesn't like clearing the power reg before a change */
168 #define SDHCI_QUIRK_SINGLE_POWER_WRITE                  (1<<3)
169 /* Controller has flaky internal state so reset it on each ios change */
170 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS               (1<<4)
171 /* Controller has an unusable DMA engine */
172 #define SDHCI_QUIRK_BROKEN_DMA                          (1<<5)
173 /* Controller can only DMA from 32-bit aligned addresses */
174 #define SDHCI_QUIRK_32BIT_DMA_ADDR                      (1<<6)
175 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
176 #define SDHCI_QUIRK_32BIT_DMA_SIZE                      (1<<7)
177 /* Controller needs to be reset after each request to stay stable */
178 #define SDHCI_QUIRK_RESET_AFTER_REQUEST                 (1<<8)
179 /* Controller needs voltage and power writes to happen separately */
180 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER             (1<<9)
181 /* Controller has an off-by-one issue with timeout value */
182 #define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL                (1<<10)
183
184         int                     irq;            /* Device IRQ */
185         void __iomem *          ioaddr;         /* Mapped address */
186
187         const struct sdhci_ops  *ops;           /* Low level hw interface */
188
189         /* Internal data */
190         struct mmc_host         *mmc;           /* MMC structure */
191
192 #ifdef CONFIG_LEDS_CLASS
193         struct led_classdev     led;            /* LED control */
194 #endif
195
196         spinlock_t              lock;           /* Mutex */
197
198         int                     flags;          /* Host attributes */
199 #define SDHCI_USE_DMA           (1<<0)          /* Host is DMA capable */
200 #define SDHCI_REQ_USE_DMA       (1<<1)          /* Use DMA for this req. */
201
202         unsigned int            max_clk;        /* Max possible freq (MHz) */
203         unsigned int            timeout_clk;    /* Timeout freq (KHz) */
204
205         unsigned int            clock;          /* Current clock (MHz) */
206         unsigned short          power;          /* Current voltage */
207
208         struct mmc_request      *mrq;           /* Current request */
209         struct mmc_command      *cmd;           /* Current command */
210         struct mmc_data         *data;          /* Current data request */
211         unsigned int            data_early:1;   /* Data finished before cmd */
212
213         struct scatterlist      *cur_sg;        /* We're working on this */
214         int                     num_sg;         /* Entries left */
215         int                     offset;         /* Offset into current sg */
216         int                     remain;         /* Bytes left in current */
217
218         struct tasklet_struct   card_tasklet;   /* Tasklet structures */
219         struct tasklet_struct   finish_tasklet;
220
221         struct timer_list       timer;          /* Timer for timeouts */
222
223         unsigned long           private[0] ____cacheline_aligned;
224 };
225
226
227 struct sdhci_ops {
228         int             (*enable_dma)(struct sdhci_host *host);
229 };
230
231
232 extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
233         size_t priv_size);
234 extern void sdhci_free_host(struct sdhci_host *host);
235
236 static inline void *sdhci_priv(struct sdhci_host *host)
237 {
238         return (void *)host->private;
239 }
240
241 extern int sdhci_add_host(struct sdhci_host *host);
242 extern void sdhci_remove_host(struct sdhci_host *host);
243
244 #ifdef CONFIG_PM
245 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
246 extern int sdhci_resume_host(struct sdhci_host *host);
247 #endif