sdhci: Add support for bus-specific IO memory accessors
[safe/jmp/linux-2.6] / drivers / mmc / host / Kconfig
1 #
2 # MMC/SD host controller drivers
3 #
4
5 comment "MMC/SD/SDIO Host Controller Drivers"
6
7 config MMC_ARMMMCI
8         tristate "ARM AMBA Multimedia Card Interface support"
9         depends on ARM_AMBA
10         help
11           This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
12           Interface (PL180 and PL181) support.  If you have an ARM(R)
13           platform with a Multimedia Card slot, say Y or M here.
14
15           If unsure, say N.
16
17 config MMC_PXA
18         tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
19         depends on ARCH_PXA
20         help
21           This selects the Intel(R) PXA(R) Multimedia card Interface.
22           If you have a PXA(R) platform with a Multimedia Card slot,
23           say Y or M here.
24
25           If unsure, say N.
26
27 config MMC_SDHCI
28         tristate "Secure Digital Host Controller Interface support"
29         depends on HAS_DMA
30         help
31           This selects the generic Secure Digital Host Controller Interface.
32           It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
33           and Toshiba(R). Most controllers found in laptops are of this type.
34
35           If you have a controller with this interface, say Y or M here. You
36           also need to enable an appropriate bus interface.
37
38           If unsure, say N.
39
40 config MMC_SDHCI_IO_ACCESSORS
41         bool
42         depends on MMC_SDHCI
43         help
44           This is silent Kconfig symbol that is selected by the drivers that
45           need to overwrite SDHCI IO memory accessors.
46
47 config MMC_SDHCI_PCI
48         tristate "SDHCI support on PCI bus"
49         depends on MMC_SDHCI && PCI
50         help
51           This selects the PCI Secure Digital Host Controller Interface.
52           Most controllers found today are PCI devices.
53
54           If you have a controller with this interface, say Y or M here.
55
56           If unsure, say N.
57
58 config MMC_RICOH_MMC
59         tristate "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
60         depends on MMC_SDHCI_PCI
61         help
62           This selects the disabler for the Ricoh MMC Controller. This
63           proprietary controller is unnecessary because the SDHCI driver
64           supports MMC cards on the SD controller, but if it is not
65           disabled, it will steal the MMC cards away - rendering them
66           useless. It is safe to select this driver even if you don't
67           have a Ricoh based card reader.
68
69
70           To compile this driver as a module, choose M here:
71           the module will be called ricoh_mmc.
72
73           If unsure, say Y.
74
75 config MMC_OMAP
76         tristate "TI OMAP Multimedia Card Interface support"
77         depends on ARCH_OMAP
78         select TPS65010 if MACH_OMAP_H2
79         help
80           This selects the TI OMAP Multimedia card Interface.
81           If you have an OMAP board with a Multimedia Card slot,
82           say Y or M here.
83
84           If unsure, say N.
85
86 config MMC_OMAP_HS
87         tristate "TI OMAP High Speed Multimedia Card Interface support"
88         depends on ARCH_OMAP2430 || ARCH_OMAP3
89         help
90           This selects the TI OMAP High Speed Multimedia card Interface.
91           If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
92           say Y or M here.
93
94           If unsure, say N.
95
96 config MMC_WBSD
97         tristate "Winbond W83L51xD SD/MMC Card Interface support"
98         depends on ISA_DMA_API
99         help
100           This selects the Winbond(R) W83L51xD Secure digital and
101           Multimedia card Interface.
102           If you have a machine with a integrated W83L518D or W83L519D
103           SD/MMC card reader, say Y or M here.
104
105           If unsure, say N.
106
107 config MMC_AU1X
108         tristate "Alchemy AU1XX0 MMC Card Interface support"
109         depends on SOC_AU1200
110         help
111           This selects the AMD Alchemy(R) Multimedia card interface.
112           If you have a Alchemy platform with a MMC slot, say Y or M here.
113
114           If unsure, say N.
115
116 config MMC_AT91
117         tristate "AT91 SD/MMC Card Interface support"
118         depends on ARCH_AT91
119         help
120           This selects the AT91 MCI controller.
121
122           If unsure, say N.
123
124 config MMC_ATMELMCI
125         tristate "Atmel Multimedia Card Interface support"
126         depends on AVR32
127         help
128           This selects the Atmel Multimedia Card Interface driver. If
129           you have an AT32 (AVR32) platform with a Multimedia Card
130           slot, say Y or M here.
131
132           If unsure, say N.
133
134 config MMC_ATMELMCI_DMA
135         bool "Atmel MCI DMA support (EXPERIMENTAL)"
136         depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
137         help
138           Say Y here to have the Atmel MCI driver use a DMA engine to
139           do data transfers and thus increase the throughput and
140           reduce the CPU utilization. Note that this is highly
141           experimental and may cause the driver to lock up.
142
143           If unsure, say N.
144
145 config MMC_IMX
146         tristate "Motorola i.MX Multimedia Card Interface support"
147         depends on ARCH_IMX
148         help
149           This selects the Motorola i.MX Multimedia card Interface.
150           If you have a i.MX platform with a Multimedia Card slot,
151           say Y or M here.
152
153           If unsure, say N.
154
155 config MMC_MXC
156         tristate "Freescale i.MX2/3 Multimedia Card Interface support"
157         depends on ARCH_MXC
158         help
159           This selects the Freescale i.MX2/3 Multimedia card Interface.
160           If you have a i.MX platform with a Multimedia Card slot,
161           say Y or M here.
162
163           If unsure, say N.
164
165 config MMC_TIFM_SD
166         tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
167         depends on EXPERIMENTAL && PCI
168         select TIFM_CORE
169         help
170           Say Y here if you want to be able to access MMC/SD cards with
171           the Texas Instruments(R) Flash Media card reader, found in many
172           laptops.
173           This option 'selects' (turns on, enables) 'TIFM_CORE', but you
174           probably also need appropriate card reader host adapter, such as
175           'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
176           (TIFM_7XX1)'.
177
178           To compile this driver as a module, choose M here: the
179           module will be called tifm_sd.
180
181 config MMC_MVSDIO
182         tristate "Marvell MMC/SD/SDIO host driver"
183         depends on PLAT_ORION
184         ---help---
185           This selects the Marvell SDIO host driver.
186           SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
187           SoC controllers.
188
189           To compile this driver as a module, choose M here: the
190           module will be called mvsdio.
191
192 config MMC_SPI
193         tristate "MMC/SD/SDIO over SPI"
194         depends on SPI_MASTER && !HIGHMEM && HAS_DMA
195         select CRC7
196         select CRC_ITU_T
197         help
198           Some systems accss MMC/SD/SDIO cards using a SPI controller
199           instead of using a "native" MMC/SD/SDIO controller.  This has a
200           disadvantage of being relatively high overhead, but a compensating
201           advantage of working on many systems without dedicated MMC/SD/SDIO
202           controllers.
203
204           If unsure, or if your system has no SPI master driver, say N.
205
206 config MMC_S3C
207         tristate "Samsung S3C SD/MMC Card Interface support"
208         depends on ARCH_S3C2410
209         help
210           This selects a driver for the MCI interface found in
211           Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
212           If you have a board based on one of those and a MMC/SD
213           slot, say Y or M here.
214
215           If unsure, say N.
216
217 config MMC_SDRICOH_CS
218         tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
219         depends on EXPERIMENTAL && PCI && PCMCIA
220         help
221           Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
222           card whenever you insert a MMC or SD card into the card slot.
223
224           To compile this driver as a module, choose M here: the
225           module will be called sdricoh_cs.
226
227 config MMC_TMIO
228         tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
229         depends on MFD_TMIO
230         help
231           This provides support for the SD/MMC cell found in TC6393XB,
232           T7L66XB and also ipaq ASIC3