V4L/DVB (12527): tw9910: do not lie about cropping abilities
[safe/jmp/linux-2.6] / drivers / media / video / tw9910.c
1 /*
2  * tw9910 Video Driver
3  *
4  * Copyright (C) 2008 Renesas Solutions Corp.
5  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6  *
7  * Based on ov772x driver,
8  *
9  * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
10  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
11  * Copyright (C) 2008 Magnus Damm
12  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  */
18
19 #include <linux/init.h>
20 #include <linux/module.h>
21 #include <linux/i2c.h>
22 #include <linux/slab.h>
23 #include <linux/kernel.h>
24 #include <linux/delay.h>
25 #include <linux/videodev2.h>
26 #include <media/v4l2-chip-ident.h>
27 #include <media/v4l2-subdev.h>
28 #include <media/soc_camera.h>
29 #include <media/tw9910.h>
30
31 #define GET_ID(val)  ((val & 0xF8) >> 3)
32 #define GET_ReV(val) (val & 0x07)
33
34 /*
35  * register offset
36  */
37 #define ID              0x00 /* Product ID Code Register */
38 #define STATUS1         0x01 /* Chip Status Register I */
39 #define INFORM          0x02 /* Input Format */
40 #define OPFORM          0x03 /* Output Format Control Register */
41 #define DLYCTR          0x04 /* Hysteresis and HSYNC Delay Control */
42 #define OUTCTR1         0x05 /* Output Control I */
43 #define ACNTL1          0x06 /* Analog Control Register 1 */
44 #define CROP_HI         0x07 /* Cropping Register, High */
45 #define VDELAY_LO       0x08 /* Vertical Delay Register, Low */
46 #define VACTIVE_LO      0x09 /* Vertical Active Register, Low */
47 #define HDELAY_LO       0x0A /* Horizontal Delay Register, Low */
48 #define HACTIVE_LO      0x0B /* Horizontal Active Register, Low */
49 #define CNTRL1          0x0C /* Control Register I */
50 #define VSCALE_LO       0x0D /* Vertical Scaling Register, Low */
51 #define SCALE_HI        0x0E /* Scaling Register, High */
52 #define HSCALE_LO       0x0F /* Horizontal Scaling Register, Low */
53 #define BRIGHT          0x10 /* BRIGHTNESS Control Register */
54 #define CONTRAST        0x11 /* CONTRAST Control Register */
55 #define SHARPNESS       0x12 /* SHARPNESS Control Register I */
56 #define SAT_U           0x13 /* Chroma (U) Gain Register */
57 #define SAT_V           0x14 /* Chroma (V) Gain Register */
58 #define HUE             0x15 /* Hue Control Register */
59 #define CORING1         0x17
60 #define CORING2         0x18 /* Coring and IF compensation */
61 #define VBICNTL         0x19 /* VBI Control Register */
62 #define ACNTL2          0x1A /* Analog Control 2 */
63 #define OUTCTR2         0x1B /* Output Control 2 */
64 #define SDT             0x1C /* Standard Selection */
65 #define SDTR            0x1D /* Standard Recognition */
66 #define TEST            0x1F /* Test Control Register */
67 #define CLMPG           0x20 /* Clamping Gain */
68 #define IAGC            0x21 /* Individual AGC Gain */
69 #define AGCGAIN         0x22 /* AGC Gain */
70 #define PEAKWT          0x23 /* White Peak Threshold */
71 #define CLMPL           0x24 /* Clamp level */
72 #define SYNCT           0x25 /* Sync Amplitude */
73 #define MISSCNT         0x26 /* Sync Miss Count Register */
74 #define PCLAMP          0x27 /* Clamp Position Register */
75 #define VCNTL1          0x28 /* Vertical Control I */
76 #define VCNTL2          0x29 /* Vertical Control II */
77 #define CKILL           0x2A /* Color Killer Level Control */
78 #define COMB            0x2B /* Comb Filter Control */
79 #define LDLY            0x2C /* Luma Delay and H Filter Control */
80 #define MISC1           0x2D /* Miscellaneous Control I */
81 #define LOOP            0x2E /* LOOP Control Register */
82 #define MISC2           0x2F /* Miscellaneous Control II */
83 #define MVSN            0x30 /* Macrovision Detection */
84 #define STATUS2         0x31 /* Chip STATUS II */
85 #define HFREF           0x32 /* H monitor */
86 #define CLMD            0x33 /* CLAMP MODE */
87 #define IDCNTL          0x34 /* ID Detection Control */
88 #define CLCNTL1         0x35 /* Clamp Control I */
89 #define ANAPLLCTL       0x4C
90 #define VBIMIN          0x4D
91 #define HSLOWCTL        0x4E
92 #define WSS3            0x4F
93 #define FILLDATA        0x50
94 #define SDID            0x51
95 #define DID             0x52
96 #define WSS1            0x53
97 #define WSS2            0x54
98 #define VVBI            0x55
99 #define LCTL6           0x56
100 #define LCTL7           0x57
101 #define LCTL8           0x58
102 #define LCTL9           0x59
103 #define LCTL10          0x5A
104 #define LCTL11          0x5B
105 #define LCTL12          0x5C
106 #define LCTL13          0x5D
107 #define LCTL14          0x5E
108 #define LCTL15          0x5F
109 #define LCTL16          0x60
110 #define LCTL17          0x61
111 #define LCTL18          0x62
112 #define LCTL19          0x63
113 #define LCTL20          0x64
114 #define LCTL21          0x65
115 #define LCTL22          0x66
116 #define LCTL23          0x67
117 #define LCTL24          0x68
118 #define LCTL25          0x69
119 #define LCTL26          0x6A
120 #define HSGEGIN         0x6B
121 #define HSEND           0x6C
122 #define OVSDLY          0x6D
123 #define OVSEND          0x6E
124 #define VBIDELAY        0x6F
125
126 /*
127  * register detail
128  */
129
130 /* INFORM */
131 #define FC27_ON     0x40 /* 1 : Input crystal clock frequency is 27MHz */
132 #define FC27_FF     0x00 /* 0 : Square pixel mode. */
133                          /*     Must use 24.54MHz for 60Hz field rate */
134                          /*     source or 29.5MHz for 50Hz field rate */
135 #define IFSEL_S     0x10 /* 01 : S-video decoding */
136 #define IFSEL_C     0x00 /* 00 : Composite video decoding */
137                          /* Y input video selection */
138 #define YSEL_M0     0x00 /*  00 : Mux0 selected */
139 #define YSEL_M1     0x04 /*  01 : Mux1 selected */
140 #define YSEL_M2     0x08 /*  10 : Mux2 selected */
141 #define YSEL_M3     0x10 /*  11 : Mux3 selected */
142
143 /* OPFORM */
144 #define MODE        0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */
145                          /* 1 : ITU-R-656 compatible data sequence format */
146 #define LEN         0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */
147                          /* 1 : 16-bit YCrCb 4:2:2 output format.*/
148 #define LLCMODE     0x20 /* 1 : LLC output mode. */
149                          /* 0 : free-run output mode */
150 #define AINC        0x10 /* Serial interface auto-indexing control */
151                          /* 0 : auto-increment */
152                          /* 1 : non-auto */
153 #define VSCTL       0x08 /* 1 : Vertical out ctrl by DVALID */
154                          /* 0 : Vertical out ctrl by HACTIVE and DVALID */
155 #define OEN         0x04 /* Output Enable together with TRI_SEL. */
156
157 /* OUTCTR1 */
158 #define VSP_LO      0x00 /* 0 : VS pin output polarity is active low */
159 #define VSP_HI      0x80 /* 1 : VS pin output polarity is active high. */
160                          /* VS pin output control */
161 #define VSSL_VSYNC  0x00 /*   0 : VSYNC  */
162 #define VSSL_VACT   0x10 /*   1 : VACT   */
163 #define VSSL_FIELD  0x20 /*   2 : FIELD  */
164 #define VSSL_VVALID 0x30 /*   3 : VVALID */
165 #define VSSL_ZERO   0x70 /*   7 : 0      */
166 #define HSP_LOW     0x00 /* 0 : HS pin output polarity is active low */
167 #define HSP_HI      0x08 /* 1 : HS pin output polarity is active high.*/
168                          /* HS pin output control */
169 #define HSSL_HACT   0x00 /*   0 : HACT   */
170 #define HSSL_HSYNC  0x01 /*   1 : HSYNC  */
171 #define HSSL_DVALID 0x02 /*   2 : DVALID */
172 #define HSSL_HLOCK  0x03 /*   3 : HLOCK  */
173 #define HSSL_ASYNCW 0x04 /*   4 : ASYNCW */
174 #define HSSL_ZERO   0x07 /*   7 : 0      */
175
176 /* ACNTL1 */
177 #define SRESET      0x80 /* resets the device to its default state
178                           * but all register content remain unchanged.
179                           * This bit is self-resetting.
180                           */
181
182 /* VBICNTL */
183 /* RTSEL : control the real time signal
184 *          output from the MPOUT pin
185 */
186 #define RTSEL_MASK  0x07
187 #define RTSEL_VLOSS 0x00 /* 0000 = Video loss */
188 #define RTSEL_HLOCK 0x01 /* 0001 = H-lock */
189 #define RTSEL_SLOCK 0x02 /* 0010 = S-lock */
190 #define RTSEL_VLOCK 0x03 /* 0011 = V-lock */
191 #define RTSEL_MONO  0x04 /* 0100 = MONO */
192 #define RTSEL_DET50 0x05 /* 0101 = DET50 */
193 #define RTSEL_FIELD 0x06 /* 0110 = FIELD */
194 #define RTSEL_RTCO  0x07 /* 0111 = RTCO ( Real Time Control ) */
195
196 /*
197  * structure
198  */
199
200 struct regval_list {
201         unsigned char reg_num;
202         unsigned char value;
203 };
204
205 struct tw9910_scale_ctrl {
206         char           *name;
207         unsigned short  width;
208         unsigned short  height;
209         u16             hscale;
210         u16             vscale;
211 };
212
213 struct tw9910_cropping_ctrl {
214         u16 vdelay;
215         u16 vactive;
216         u16 hdelay;
217         u16 hactive;
218 };
219
220 struct tw9910_hsync_ctrl {
221         u16 start;
222         u16 end;
223 };
224
225 struct tw9910_priv {
226         struct v4l2_subdev                subdev;
227         struct tw9910_video_info       *info;
228         const struct tw9910_scale_ctrl *scale;
229 };
230
231 /*
232  * register settings
233  */
234
235 #define ENDMARKER { 0xff, 0xff }
236
237 static const struct regval_list tw9910_default_regs[] =
238 {
239         { OPFORM,  0x00 },
240         { OUTCTR1, VSP_LO | VSSL_VVALID | HSP_HI | HSSL_HSYNC },
241         ENDMARKER,
242 };
243
244 static const struct soc_camera_data_format tw9910_color_fmt[] = {
245         {
246                 .name       = "VYUY",
247                 .fourcc     = V4L2_PIX_FMT_VYUY,
248                 .depth      = 16,
249                 .colorspace = V4L2_COLORSPACE_SMPTE170M,
250         }
251 };
252
253 static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = {
254         {
255                 .name   = "NTSC SQ",
256                 .width  = 640,
257                 .height = 480,
258                 .hscale = 0x0100,
259                 .vscale = 0x0100,
260         },
261         {
262                 .name   = "NTSC CCIR601",
263                 .width  = 720,
264                 .height = 480,
265                 .hscale = 0x0100,
266                 .vscale = 0x0100,
267         },
268         {
269                 .name   = "NTSC SQ (CIF)",
270                 .width  = 320,
271                 .height = 240,
272                 .hscale = 0x0200,
273                 .vscale = 0x0200,
274         },
275         {
276                 .name   = "NTSC CCIR601 (CIF)",
277                 .width  = 360,
278                 .height = 240,
279                 .hscale = 0x0200,
280                 .vscale = 0x0200,
281         },
282         {
283                 .name   = "NTSC SQ (QCIF)",
284                 .width  = 160,
285                 .height = 120,
286                 .hscale = 0x0400,
287                 .vscale = 0x0400,
288         },
289         {
290                 .name   = "NTSC CCIR601 (QCIF)",
291                 .width  = 180,
292                 .height = 120,
293                 .hscale = 0x0400,
294                 .vscale = 0x0400,
295         },
296 };
297
298 static const struct tw9910_scale_ctrl tw9910_pal_scales[] = {
299         {
300                 .name   = "PAL SQ",
301                 .width  = 768,
302                 .height = 576,
303                 .hscale = 0x0100,
304                 .vscale = 0x0100,
305         },
306         {
307                 .name   = "PAL CCIR601",
308                 .width  = 720,
309                 .height = 576,
310                 .hscale = 0x0100,
311                 .vscale = 0x0100,
312         },
313         {
314                 .name   = "PAL SQ (CIF)",
315                 .width  = 384,
316                 .height = 288,
317                 .hscale = 0x0200,
318                 .vscale = 0x0200,
319         },
320         {
321                 .name   = "PAL CCIR601 (CIF)",
322                 .width  = 360,
323                 .height = 288,
324                 .hscale = 0x0200,
325                 .vscale = 0x0200,
326         },
327         {
328                 .name   = "PAL SQ (QCIF)",
329                 .width  = 192,
330                 .height = 144,
331                 .hscale = 0x0400,
332                 .vscale = 0x0400,
333         },
334         {
335                 .name   = "PAL CCIR601 (QCIF)",
336                 .width  = 180,
337                 .height = 144,
338                 .hscale = 0x0400,
339                 .vscale = 0x0400,
340         },
341 };
342
343 static const struct tw9910_cropping_ctrl tw9910_cropping_ctrl = {
344         .vdelay  = 0x0012,
345         .vactive = 0x00F0,
346         .hdelay  = 0x0010,
347         .hactive = 0x02D0,
348 };
349
350 static const struct tw9910_hsync_ctrl tw9910_hsync_ctrl = {
351         .start = 0x0260,
352         .end   = 0x0300,
353 };
354
355 /*
356  * general function
357  */
358 static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
359 {
360         return container_of(i2c_get_clientdata(client), struct tw9910_priv, subdev);
361 }
362
363 static int tw9910_set_scale(struct i2c_client *client,
364                             const struct tw9910_scale_ctrl *scale)
365 {
366         int ret;
367
368         ret = i2c_smbus_write_byte_data(client, SCALE_HI,
369                                         (scale->vscale & 0x0F00) >> 4 |
370                                         (scale->hscale & 0x0F00) >> 8);
371         if (ret < 0)
372                 return ret;
373
374         ret = i2c_smbus_write_byte_data(client, HSCALE_LO,
375                                         scale->hscale & 0x00FF);
376         if (ret < 0)
377                 return ret;
378
379         ret = i2c_smbus_write_byte_data(client, VSCALE_LO,
380                                         scale->vscale & 0x00FF);
381
382         return ret;
383 }
384
385 static int tw9910_set_cropping(struct i2c_client *client,
386                                const struct tw9910_cropping_ctrl *cropping)
387 {
388         int ret;
389
390         ret = i2c_smbus_write_byte_data(client, CROP_HI,
391                                         (cropping->vdelay  & 0x0300) >> 2 |
392                                         (cropping->vactive & 0x0300) >> 4 |
393                                         (cropping->hdelay  & 0x0300) >> 6 |
394                                         (cropping->hactive & 0x0300) >> 8);
395         if (ret < 0)
396                 return ret;
397
398         ret = i2c_smbus_write_byte_data(client, VDELAY_LO,
399                                         cropping->vdelay & 0x00FF);
400         if (ret < 0)
401                 return ret;
402
403         ret = i2c_smbus_write_byte_data(client, VACTIVE_LO,
404                                         cropping->vactive & 0x00FF);
405         if (ret < 0)
406                 return ret;
407
408         ret = i2c_smbus_write_byte_data(client, HDELAY_LO,
409                                         cropping->hdelay & 0x00FF);
410         if (ret < 0)
411                 return ret;
412
413         ret = i2c_smbus_write_byte_data(client, HACTIVE_LO,
414                                         cropping->hactive & 0x00FF);
415
416         return ret;
417 }
418
419 static int tw9910_set_hsync(struct i2c_client *client,
420                             const struct tw9910_hsync_ctrl *hsync)
421 {
422         int ret;
423
424         /* bit 10 - 3 */
425         ret = i2c_smbus_write_byte_data(client, HSGEGIN,
426                                         (hsync->start & 0x07F8) >> 3);
427         if (ret < 0)
428                 return ret;
429
430         /* bit 10 - 3 */
431         ret = i2c_smbus_write_byte_data(client, HSEND,
432                                         (hsync->end & 0x07F8) >> 3);
433         if (ret < 0)
434                 return ret;
435
436         /* bit 2 - 0 */
437         ret = i2c_smbus_read_byte_data(client, HSLOWCTL);
438         if (ret < 0)
439                 return ret;
440
441         ret = i2c_smbus_write_byte_data(client, HSLOWCTL,
442                                         (ret & 0x88)                 |
443                                         (hsync->start & 0x0007) << 4 |
444                                         (hsync->end   & 0x0007));
445
446         return ret;
447 }
448
449 static int tw9910_write_array(struct i2c_client *client,
450                               const struct regval_list *vals)
451 {
452         while (vals->reg_num != 0xff) {
453                 int ret = i2c_smbus_write_byte_data(client,
454                                                     vals->reg_num,
455                                                     vals->value);
456                 if (ret < 0)
457                         return ret;
458                 vals++;
459         }
460         return 0;
461 }
462
463 static int tw9910_mask_set(struct i2c_client *client, u8 command,
464                            u8 mask, u8 set)
465 {
466         s32 val = i2c_smbus_read_byte_data(client, command);
467         if (val < 0)
468                 return val;
469
470         val &= ~mask;
471         val |= set & mask;
472
473         return i2c_smbus_write_byte_data(client, command, val);
474 }
475
476 static void tw9910_reset(struct i2c_client *client)
477 {
478         i2c_smbus_write_byte_data(client, ACNTL1, SRESET);
479         msleep(1);
480 }
481
482 static const struct tw9910_scale_ctrl*
483 tw9910_select_norm(struct soc_camera_device *icd, u32 width, u32 height)
484 {
485         const struct tw9910_scale_ctrl *scale;
486         const struct tw9910_scale_ctrl *ret = NULL;
487         v4l2_std_id norm = icd->vdev->current_norm;
488         __u32 diff = 0xffffffff, tmp;
489         int size, i;
490
491         if (norm & V4L2_STD_NTSC) {
492                 scale = tw9910_ntsc_scales;
493                 size = ARRAY_SIZE(tw9910_ntsc_scales);
494         } else if (norm & V4L2_STD_PAL) {
495                 scale = tw9910_pal_scales;
496                 size = ARRAY_SIZE(tw9910_pal_scales);
497         } else {
498                 return NULL;
499         }
500
501         for (i = 0; i < size; i++) {
502                 tmp = abs(width - scale[i].width) +
503                         abs(height - scale[i].height);
504                 if (tmp < diff) {
505                         diff = tmp;
506                         ret = scale + i;
507                 }
508         }
509
510         return ret;
511 }
512
513 /*
514  * soc_camera_ops function
515  */
516 static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
517 {
518         struct i2c_client *client = sd->priv;
519         struct tw9910_priv *priv = to_tw9910(client);
520
521         if (!enable)
522                 return 0;
523
524         if (!priv->scale) {
525                 dev_err(&client->dev, "norm select error\n");
526                 return -EPERM;
527         }
528
529         dev_dbg(&client->dev, "%s %dx%d\n",
530                  priv->scale->name,
531                  priv->scale->width,
532                  priv->scale->height);
533
534         return 0;
535 }
536
537 static int tw9910_set_bus_param(struct soc_camera_device *icd,
538                                 unsigned long flags)
539 {
540         return 0;
541 }
542
543 static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
544 {
545         struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
546         struct tw9910_priv *priv = to_tw9910(client);
547         struct soc_camera_link *icl = to_soc_camera_link(icd);
548         unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
549                 SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
550                 SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
551
552         return soc_camera_apply_sensor_flags(icl, flags);
553 }
554
555 static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
556 {
557         int ret = -EINVAL;
558
559         if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL))
560                 ret = 0;
561
562         return ret;
563 }
564
565 static int tw9910_enum_input(struct soc_camera_device *icd,
566                              struct v4l2_input *inp)
567 {
568         inp->type = V4L2_INPUT_TYPE_TUNER;
569         inp->std  = V4L2_STD_UNKNOWN;
570         strcpy(inp->name, "Video");
571
572         return 0;
573 }
574
575 static int tw9910_g_chip_ident(struct v4l2_subdev *sd,
576                                struct v4l2_dbg_chip_ident *id)
577 {
578         id->ident = V4L2_IDENT_TW9910;
579         id->revision = 0;
580
581         return 0;
582 }
583
584 #ifdef CONFIG_VIDEO_ADV_DEBUG
585 static int tw9910_g_register(struct v4l2_subdev *sd,
586                              struct v4l2_dbg_register *reg)
587 {
588         struct i2c_client *client = sd->priv;
589         int ret;
590
591         if (reg->reg > 0xff)
592                 return -EINVAL;
593
594         ret = i2c_smbus_read_byte_data(client, reg->reg);
595         if (ret < 0)
596                 return ret;
597
598         /* ret      = int
599          * reg->val = __u64
600          */
601         reg->val = (__u64)ret;
602
603         return 0;
604 }
605
606 static int tw9910_s_register(struct v4l2_subdev *sd,
607                              struct v4l2_dbg_register *reg)
608 {
609         struct i2c_client *client = sd->priv;
610
611         if (reg->reg > 0xff ||
612             reg->val > 0xff)
613                 return -EINVAL;
614
615         return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
616 }
617 #endif
618
619 static int tw9910_set_crop(struct soc_camera_device *icd,
620                            struct v4l2_rect *rect)
621 {
622         struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
623         struct tw9910_priv *priv = to_tw9910(client);
624         int                 ret  = -EINVAL;
625         u8                  val;
626
627         /*
628          * select suitable norm
629          */
630         priv->scale = tw9910_select_norm(icd, rect->width, rect->height);
631         if (!priv->scale)
632                 goto tw9910_set_fmt_error;
633
634         /*
635          * reset hardware
636          */
637         tw9910_reset(client);
638         ret = tw9910_write_array(client, tw9910_default_regs);
639         if (ret < 0)
640                 goto tw9910_set_fmt_error;
641
642         /*
643          * set bus width
644          */
645         val = 0x00;
646         if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
647                 val = LEN;
648
649         ret = tw9910_mask_set(client, OPFORM, LEN, val);
650         if (ret < 0)
651                 goto tw9910_set_fmt_error;
652
653         /*
654          * select MPOUT behavior
655          */
656         switch (priv->info->mpout) {
657         case TW9910_MPO_VLOSS:
658                 val = RTSEL_VLOSS; break;
659         case TW9910_MPO_HLOCK:
660                 val = RTSEL_HLOCK; break;
661         case TW9910_MPO_SLOCK:
662                 val = RTSEL_SLOCK; break;
663         case TW9910_MPO_VLOCK:
664                 val = RTSEL_VLOCK; break;
665         case TW9910_MPO_MONO:
666                 val = RTSEL_MONO;  break;
667         case TW9910_MPO_DET50:
668                 val = RTSEL_DET50; break;
669         case TW9910_MPO_FIELD:
670                 val = RTSEL_FIELD; break;
671         case TW9910_MPO_RTCO:
672                 val = RTSEL_RTCO;  break;
673         default:
674                 val = 0;
675         }
676
677         ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val);
678         if (ret < 0)
679                 goto tw9910_set_fmt_error;
680
681         /*
682          * set scale
683          */
684         ret = tw9910_set_scale(client, priv->scale);
685         if (ret < 0)
686                 goto tw9910_set_fmt_error;
687
688         /*
689          * set cropping
690          */
691         ret = tw9910_set_cropping(client, &tw9910_cropping_ctrl);
692         if (ret < 0)
693                 goto tw9910_set_fmt_error;
694
695         /*
696          * set hsync
697          */
698         ret = tw9910_set_hsync(client, &tw9910_hsync_ctrl);
699         if (ret < 0)
700                 goto tw9910_set_fmt_error;
701
702         rect->width = priv->scale->width;
703         rect->height = priv->scale->height;
704         rect->left = 0;
705         rect->top = 0;
706
707         return ret;
708
709 tw9910_set_fmt_error:
710
711         tw9910_reset(client);
712         priv->scale = NULL;
713
714         return ret;
715 }
716
717 static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
718 {
719         struct i2c_client *client = sd->priv;
720         struct soc_camera_device *icd = client->dev.platform_data;
721         struct v4l2_pix_format *pix = &f->fmt.pix;
722         /* See tw9910_set_crop() - no proper cropping support */
723         struct v4l2_rect rect = {
724                 .left   = 0,
725                 .top    = 0,
726                 .width  = pix->width,
727                 .height = pix->height,
728         };
729         int i, ret;
730
731         /*
732          * check color format
733          */
734         for (i = 0; i < ARRAY_SIZE(tw9910_color_fmt); i++)
735                 if (pix->pixelformat == tw9910_color_fmt[i].fourcc)
736                         break;
737
738         if (i == ARRAY_SIZE(tw9910_color_fmt))
739                 return -EINVAL;
740
741         ret = tw9910_set_crop(icd, &rect);
742         if (!ret) {
743                 pix->width = rect.width;
744                 pix->height = rect.height;
745         }
746         return ret;
747 }
748
749 static int tw9910_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
750 {
751         struct i2c_client *client = sd->priv;
752         struct soc_camera_device *icd = client->dev.platform_data;
753         struct v4l2_pix_format *pix = &f->fmt.pix;
754         const struct tw9910_scale_ctrl *scale;
755
756         if (V4L2_FIELD_ANY == pix->field) {
757                 pix->field = V4L2_FIELD_INTERLACED;
758         } else if (V4L2_FIELD_INTERLACED != pix->field) {
759                 dev_err(&client->dev, "Field type invalid.\n");
760                 return -EINVAL;
761         }
762
763         /*
764          * select suitable norm
765          */
766         scale = tw9910_select_norm(icd, pix->width, pix->height);
767         if (!scale)
768                 return -EINVAL;
769
770         pix->width  = scale->width;
771         pix->height = scale->height;
772
773         return 0;
774 }
775
776 static int tw9910_video_probe(struct soc_camera_device *icd,
777                               struct i2c_client *client)
778 {
779         struct tw9910_priv *priv = to_tw9910(client);
780         s32 val;
781
782         /*
783          * We must have a parent by now. And it cannot be a wrong one.
784          * So this entire test is completely redundant.
785          */
786         if (!icd->dev.parent ||
787             to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
788                 return -ENODEV;
789
790         /*
791          * tw9910 only use 8 or 16 bit bus width
792          */
793         if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
794             SOCAM_DATAWIDTH_8  != priv->info->buswidth) {
795                 dev_err(&icd->dev, "bus width error\n");
796                 return -ENODEV;
797         }
798
799         icd->formats     = tw9910_color_fmt;
800         icd->num_formats = ARRAY_SIZE(tw9910_color_fmt);
801
802         /*
803          * check and show Product ID
804          */
805         val = i2c_smbus_read_byte_data(client, ID);
806
807         if (0x0B != GET_ID(val) ||
808             0x00 != GET_ReV(val)) {
809                 dev_err(&icd->dev,
810                         "Product ID error %x:%x\n", GET_ID(val), GET_ReV(val));
811                 return -ENODEV;
812         }
813
814         dev_info(&icd->dev,
815                  "tw9910 Product ID %0x:%0x\n", GET_ID(val), GET_ReV(val));
816
817         icd->vdev->tvnorms      = V4L2_STD_NTSC | V4L2_STD_PAL;
818         icd->vdev->current_norm = V4L2_STD_NTSC;
819
820         return 0;
821 }
822
823 static struct soc_camera_ops tw9910_ops = {
824         .set_crop               = tw9910_set_crop,
825         .set_bus_param          = tw9910_set_bus_param,
826         .query_bus_param        = tw9910_query_bus_param,
827         .enum_input             = tw9910_enum_input,
828 };
829
830 static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
831         .g_chip_ident   = tw9910_g_chip_ident,
832         .s_std          = tw9910_s_std,
833 #ifdef CONFIG_VIDEO_ADV_DEBUG
834         .g_register     = tw9910_g_register,
835         .s_register     = tw9910_s_register,
836 #endif
837 };
838
839 static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
840         .s_stream       = tw9910_s_stream,
841         .s_fmt          = tw9910_s_fmt,
842         .try_fmt        = tw9910_try_fmt,
843 };
844
845 static struct v4l2_subdev_ops tw9910_subdev_ops = {
846         .core   = &tw9910_subdev_core_ops,
847         .video  = &tw9910_subdev_video_ops,
848 };
849
850 /*
851  * i2c_driver function
852  */
853
854 /* This is called during probe, so, setting rect_max is Ok here: scale == 1 */
855 static void limit_to_scale(struct soc_camera_device *icd,
856                            const struct tw9910_scale_ctrl *scale)
857 {
858         if (scale->width > icd->rect_max.width)
859                 icd->rect_max.width  = scale->width;
860         if (scale->width < icd->width_min)
861                 icd->width_min = scale->width;
862         if (scale->height > icd->rect_max.height)
863                 icd->rect_max.height = scale->height;
864         if (scale->height < icd->height_min)
865                 icd->height_min = scale->height;
866 }
867
868 static int tw9910_probe(struct i2c_client *client,
869                         const struct i2c_device_id *did)
870
871 {
872         struct tw9910_priv             *priv;
873         struct tw9910_video_info       *info;
874         struct soc_camera_device       *icd = client->dev.platform_data;
875         struct i2c_adapter             *adapter =
876                 to_i2c_adapter(client->dev.parent);
877         struct soc_camera_link         *icl;
878         const struct tw9910_scale_ctrl *scale;
879         int                             i, ret;
880
881         if (!icd) {
882                 dev_err(&client->dev, "TW9910: missing soc-camera data!\n");
883                 return -EINVAL;
884         }
885
886         icl = to_soc_camera_link(icd);
887         if (!icl)
888                 return -EINVAL;
889
890         info = container_of(icl, struct tw9910_video_info, link);
891
892         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
893                 dev_err(&client->dev,
894                         "I2C-Adapter doesn't support "
895                         "I2C_FUNC_SMBUS_BYTE_DATA\n");
896                 return -EIO;
897         }
898
899         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
900         if (!priv)
901                 return -ENOMEM;
902
903         priv->info   = info;
904
905         v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
906
907         icd->ops     = &tw9910_ops;
908         icd->iface   = info->link.bus_id;
909
910         /*
911          * set width and height
912          */
913         icd->rect_max.width  = tw9910_ntsc_scales[0].width; /* set default */
914         icd->width_min  = tw9910_ntsc_scales[0].width;
915         icd->rect_max.height = tw9910_ntsc_scales[0].height;
916         icd->height_min = tw9910_ntsc_scales[0].height;
917
918         scale = tw9910_ntsc_scales;
919         for (i = 0; i < ARRAY_SIZE(tw9910_ntsc_scales); i++)
920                 limit_to_scale(icd, scale + i);
921
922         scale = tw9910_pal_scales;
923         for (i = 0; i < ARRAY_SIZE(tw9910_pal_scales); i++)
924                 limit_to_scale(icd, scale + i);
925
926         ret = tw9910_video_probe(icd, client);
927         if (ret) {
928                 icd->ops = NULL;
929                 i2c_set_clientdata(client, NULL);
930                 kfree(priv);
931         }
932
933         return ret;
934 }
935
936 static int tw9910_remove(struct i2c_client *client)
937 {
938         struct tw9910_priv *priv = to_tw9910(client);
939         struct soc_camera_device *icd = client->dev.platform_data;
940
941         icd->ops = NULL;
942         i2c_set_clientdata(client, NULL);
943         kfree(priv);
944         return 0;
945 }
946
947 static const struct i2c_device_id tw9910_id[] = {
948         { "tw9910", 0 },
949         { }
950 };
951 MODULE_DEVICE_TABLE(i2c, tw9910_id);
952
953 static struct i2c_driver tw9910_i2c_driver = {
954         .driver = {
955                 .name = "tw9910",
956         },
957         .probe    = tw9910_probe,
958         .remove   = tw9910_remove,
959         .id_table = tw9910_id,
960 };
961
962 /*
963  * module function
964  */
965 static int __init tw9910_module_init(void)
966 {
967         return i2c_add_driver(&tw9910_i2c_driver);
968 }
969
970 static void __exit tw9910_module_exit(void)
971 {
972         i2c_del_driver(&tw9910_i2c_driver);
973 }
974
975 module_init(tw9910_module_init);
976 module_exit(tw9910_module_exit);
977
978 MODULE_DESCRIPTION("SoC Camera driver for tw9910");
979 MODULE_AUTHOR("Kuninori Morimoto");
980 MODULE_LICENSE("GPL v2");