SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/media/video/cx23885/cx23885-cards.c

   1 /*
   2  *  Driver for the Conexant CX23885 PCIe bridge
   3  *
   4  *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/init.h>
  23 #include <linux/module.h>
  24 #include <linux/pci.h>
  25 #include <linux/delay.h>
  26 #include <media/cx25840.h>
  27
  28 #include "cx23885.h"
  29
  30 /* ------------------------------------------------------------------ */
  31 /* board config info                                                  */
  32
  33 struct cx23885_board cx23885_boards[] = {
  34         [CX23885_BOARD_UNKNOWN] = {
  35                 .name           = "UNKNOWN/GENERIC",
  36                 /* Ensure safe default for unknown boards */
  37                 .clk_freq       = 0,
  38                 .input          = {{
  39                         .type   = CX23885_VMUX_COMPOSITE1,
  40                         .vmux   = 0,
  41                 },{
  42                         .type   = CX23885_VMUX_COMPOSITE2,
  43                         .vmux   = 1,
  44                 },{
  45                         .type   = CX23885_VMUX_COMPOSITE3,
  46                         .vmux   = 2,
  47                 },{
  48                         .type   = CX23885_VMUX_COMPOSITE4,
  49                         .vmux   = 3,
  50                 }},
  51         },
  52         [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
  53                 .name           = "Hauppauge WinTV-HVR1800lp",
  54                 .portc          = CX23885_MPEG_DVB,
  55                 .input          = {{
  56                         .type   = CX23885_VMUX_TELEVISION,
  57                         .vmux   = 0,
  58                         .gpio0  = 0xff00,
  59                 },{
  60                         .type   = CX23885_VMUX_DEBUG,
  61                         .vmux   = 0,
  62                         .gpio0  = 0xff01,
  63                 },{
  64                         .type   = CX23885_VMUX_COMPOSITE1,
  65                         .vmux   = 1,
  66                         .gpio0  = 0xff02,
  67                 },{
  68                         .type   = CX23885_VMUX_SVIDEO,
  69                         .vmux   = 2,
  70                         .gpio0  = 0xff02,
  71                 }},
  72         },
  73         [CX23885_BOARD_HAUPPAUGE_HVR1800] = {
  74                 .name           = "Hauppauge WinTV-HVR1800",
  75                 .porta          = CX23885_ANALOG_VIDEO,
  76                 .portb          = CX23885_MPEG_ENCODER,
  77                 .portc          = CX23885_MPEG_DVB,
  78                 .tuner_type     = TUNER_PHILIPS_TDA8290,
  79                 .tuner_addr     = 0x42, /* 0x84 >> 1 */
  80                 .input          = {{
  81                         .type   = CX23885_VMUX_TELEVISION,
  82                         .vmux   =       CX25840_VIN7_CH3 |
  83                                         CX25840_VIN5_CH2 |
  84                                         CX25840_VIN2_CH1,
  85                         .gpio0  = 0,
  86                 },{
  87                         .type   = CX23885_VMUX_COMPOSITE1,
  88                         .vmux   =       CX25840_VIN7_CH3 |
  89                                         CX25840_VIN4_CH2 |
  90                                         CX25840_VIN6_CH1,
  91                         .gpio0  = 0,
  92                 },{
  93                         .type   = CX23885_VMUX_SVIDEO,
  94                         .vmux   =       CX25840_VIN7_CH3 |
  95                                         CX25840_VIN4_CH2 |
  96                                         CX25840_VIN8_CH1 |
  97                                         CX25840_SVIDEO_ON,
  98                         .gpio0  = 0,
  99                 }},
 100         },
 101         [CX23885_BOARD_HAUPPAUGE_HVR1250] = {
 102                 .name           = "Hauppauge WinTV-HVR1250",
 103                 .portc          = CX23885_MPEG_DVB,
 104                 .input          = {{
 105                         .type   = CX23885_VMUX_TELEVISION,
 106                         .vmux   = 0,
 107                         .gpio0  = 0xff00,
 108                 },{
 109                         .type   = CX23885_VMUX_DEBUG,
 110                         .vmux   = 0,
 111                         .gpio0  = 0xff01,
 112                 },{
 113                         .type   = CX23885_VMUX_COMPOSITE1,
 114                         .vmux   = 1,
 115                         .gpio0  = 0xff02,
 116                 },{
 117                         .type   = CX23885_VMUX_SVIDEO,
 118                         .vmux   = 2,
 119                         .gpio0  = 0xff02,
 120                 }},
 121         },
 122         [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
 123                 .name           = "DViCO FusionHDTV5 Express",
 124                 .portb          = CX23885_MPEG_DVB,
 125         },
 126         [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
 127                 .name           = "Hauppauge WinTV-HVR1500Q",
 128                 .portc          = CX23885_MPEG_DVB,
 129         },
 130         [CX23885_BOARD_HAUPPAUGE_HVR1500] = {
 131                 .name           = "Hauppauge WinTV-HVR1500",
 132                 .portc          = CX23885_MPEG_DVB,
 133         },
 134         [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
 135                 .name           = "Hauppauge WinTV-HVR1200",
 136                 .portc          = CX23885_MPEG_DVB,
 137         },
 138         [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
 139                 .name           = "Hauppauge WinTV-HVR1700",
 140                 .portc          = CX23885_MPEG_DVB,
 141         },
 142         [CX23885_BOARD_HAUPPAUGE_HVR1400] = {
 143                 .name           = "Hauppauge WinTV-HVR1400",
 144                 .portc          = CX23885_MPEG_DVB,
 145         },
 146         [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
 147                 .name           = "DViCO FusionHDTV7 Dual Express",
 148                 .portb          = CX23885_MPEG_DVB,
 149                 .portc          = CX23885_MPEG_DVB,
 150         },
 151 };
 152 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 153
 154 /* ------------------------------------------------------------------ */
 155 /* PCI subsystem IDs                                                  */
 156
 157 struct cx23885_subid cx23885_subids[] = {
 158         {
 159                 .subvendor = 0x0070,
 160                 .subdevice = 0x3400,
 161                 .card      = CX23885_BOARD_UNKNOWN,
 162         },{
 163                 .subvendor = 0x0070,
 164                 .subdevice = 0x7600,
 165                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
 166         },{
 167                 .subvendor = 0x0070,
 168                 .subdevice = 0x7800,
 169                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
 170         },{
 171                 .subvendor = 0x0070,
 172                 .subdevice = 0x7801,
 173                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
 174         },{
 175                 .subvendor = 0x0070,
 176                 .subdevice = 0x7809,
 177                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
 178         },{
 179                 .subvendor = 0x0070,
 180                 .subdevice = 0x7911,
 181                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
 182         },{
 183                 .subvendor = 0x18ac,
 184                 .subdevice = 0xd500,
 185                 .card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
 186         },{
 187                 .subvendor = 0x0070,
 188                 .subdevice = 0x7790,
 189                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
 190         },{
 191                 .subvendor = 0x0070,
 192                 .subdevice = 0x7797,
 193                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
 194         },{
 195                 .subvendor = 0x0070,
 196                 .subdevice = 0x7710,
 197                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
 198         },{
 199                 .subvendor = 0x0070,
 200                 .subdevice = 0x7717,
 201                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
 202         }, {
 203                 .subvendor = 0x0070,
 204                 .subdevice = 0x71d1,
 205                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
 206         }, {
 207                 .subvendor = 0x0070,
 208                 .subdevice = 0x71d3,
 209                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
 210         }, {
 211                 .subvendor = 0x0070,
 212                 .subdevice = 0x8101,
 213                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1700,
 214         }, {
 215                 .subvendor = 0x0070,
 216                 .subdevice = 0x8010,
 217                 .card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
 218         },{
 219                 .subvendor = 0x18ac,
 220                 .subdevice = 0xd618,
 221                 .card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
 222         },
 223 };
 224 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
 225
 226 void cx23885_card_list(struct cx23885_dev *dev)
 227 {
 228         int i;
 229
 230         if (0 == dev->pci->subsystem_vendor &&
 231             0 == dev->pci->subsystem_device) {
 232                 printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
 233                        "%s: be autodetected.  Please pass card=<n> insmod option to\n"
 234                        "%s: workaround that.  Redirect complaints to the vendor of\n"
 235                        "%s: the TV card.  Best regards,\n"
 236                        "%s:         -- tux\n",
 237                        dev->name, dev->name, dev->name, dev->name, dev->name);
 238         } else {
 239                 printk("%s: Your board isn't known (yet) to the driver.  You can\n"
 240                        "%s: try to pick one of the existing card configs via\n"
 241                        "%s: card=<n> insmod option.  Updating to the latest\n"
 242                        "%s: version might help as well.\n",
 243                        dev->name, dev->name, dev->name, dev->name);
 244         }
 245         printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
 246                dev->name);
 247         for (i = 0; i < cx23885_bcount; i++)
 248                 printk("%s:    card=%d -> %s\n",
 249                        dev->name, i, cx23885_boards[i].name);
 250 }
 251
 252 static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 253 {
 254         struct tveeprom tv;
 255
 256         tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
 257
 258         /* Make sure we support the board model */
 259         switch (tv.model)
 260         {
 261         case 71009:
 262                 /* WinTV-HVR1200 (PCIe, Retail, full height)
 263                  * DVB-T and basic analog */
 264         case 71359:
 265                 /* WinTV-HVR1200 (PCIe, OEM, half height)
 266                  * DVB-T and basic analog */
 267         case 71439:
 268                 /* WinTV-HVR1200 (PCIe, OEM, half height)
 269                  * DVB-T and basic analog */
 270         case 71449:
 271                 /* WinTV-HVR1200 (PCIe, OEM, full height)
 272                  * DVB-T and basic analog */
 273         case 71939:
 274                 /* WinTV-HVR1200 (PCIe, OEM, half height)
 275                  * DVB-T and basic analog */
 276         case 71949:
 277                 /* WinTV-HVR1200 (PCIe, OEM, full height)
 278                  * DVB-T and basic analog */
 279         case 71959:
 280                 /* WinTV-HVR1200 (PCIe, OEM, full height)
 281                  * DVB-T and basic analog */
 282         case 71979:
 283                 /* WinTV-HVR1200 (PCIe, OEM, half height)
 284                  * DVB-T and basic analog */
 285         case 71999:
 286                 /* WinTV-HVR1200 (PCIe, OEM, full height)
 287                  * DVB-T and basic analog */
 288         case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
 289         case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
 290         case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
 291         case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
 292         case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
 293         case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
 294         case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
 295         case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
 296         case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
 297         case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
 298         case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
 299         case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
 300         case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
 301         case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
 302         case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
 303         case 80019:
 304                 /* WinTV-HVR1400 (Express Card, Retail, IR,
 305                  * DVB-T and Basic analog */
 306         case 81509:
 307                 /* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
 308                  * DVB-T and MPEG2 HW Encoder */
 309         case 81519:
 310                 /* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
 311                  * DVB-T and MPEG2 HW Encoder */
 312                 break;
 313         default:
 314                 printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
 315                 break;
 316         }
 317
 318         printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
 319                         dev->name, tv.model);
 320 }
 321
 322 /* Tuner callback function for cx23885 boards. Currently only needed
 323  * for HVR1500Q, which has an xc5000 tuner.
 324  */
 325 int cx23885_tuner_callback(void *priv, int command, int arg)
 326 {
 327         struct cx23885_i2c *bus = priv;
 328         struct cx23885_dev *dev = bus->dev;
 329         u32 bitmask = 0;
 330
 331         if (command != 0) {
 332                 printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
 333                         __func__, command);
 334                 return -EINVAL;
 335         }
 336
 337         switch(dev->board) {
 338         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 339                 /* Tuner Reset Command from xc5000 */
 340                 if (command == 0)
 341                         bitmask = 0x04;
 342                 break;
 343         case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
 344                 if (command == 0) {
 345
 346                         /* Two identical tuners on two different i2c buses,
 347                          * we need to reset the correct gpio. */
 348                         if (bus->nr == 0)
 349                                 bitmask = 0x01;
 350                         else if (bus->nr == 1)
 351                                 bitmask = 0x04;
 352                 }
 353                 break;
 354         }
 355
 356         if (bitmask) {
 357                 /* Drive the tuner into reset and back out */
 358                 cx_clear(GP0_IO, bitmask);
 359                 mdelay(200);
 360                 cx_set(GP0_IO, bitmask);
 361         }
 362
 363         return 0;
 364 }
 365
 366 void cx23885_gpio_setup(struct cx23885_dev *dev)
 367 {
 368         switch(dev->board) {
 369         case CX23885_BOARD_HAUPPAUGE_HVR1250:
 370                 /* GPIO-0 cx24227 demodulator reset */
 371                 cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
 372                 break;
 373         case CX23885_BOARD_HAUPPAUGE_HVR1500:
 374                 /* GPIO-0 cx24227 demodulator */
 375                 /* GPIO-2 xc3028 tuner */
 376
 377                 /* Put the parts into reset */
 378                 cx_set(GP0_IO, 0x00050000);
 379                 cx_clear(GP0_IO, 0x00000005);
 380                 msleep(5);
 381
 382                 /* Bring the parts out of reset */
 383                 cx_set(GP0_IO, 0x00050005);
 384                 break;
 385         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 386                 /* GPIO-0 cx24227 demodulator reset */
 387                 /* GPIO-2 xc5000 tuner reset */
 388                 cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
 389                 break;
 390         case CX23885_BOARD_HAUPPAUGE_HVR1800:
 391                 /* GPIO-0 656_CLK */
 392                 /* GPIO-1 656_D0 */
 393                 /* GPIO-2 8295A Reset */
 394                 /* GPIO-3-10 cx23417 data0-7 */
 395                 /* GPIO-11-14 cx23417 addr0-3 */
 396                 /* GPIO-15-18 cx23417 READY, CS, RD, WR */
 397                 /* GPIO-19 IR_RX */
 398
 399                 /* CX23417 GPIO's */
 400                 /* EIO15 Zilog Reset */
 401                 /* EIO14 S5H1409/CX24227 Reset */
 402
 403                 /* Force the TDA8295A into reset and back */
 404                 cx_set(GP0_IO, 0x00040004);
 405                 mdelay(20);
 406                 cx_clear(GP0_IO, 0x00000004);
 407                 mdelay(20);
 408                 cx_set(GP0_IO, 0x00040004);
 409                 mdelay(20);
 410                 break;
 411         case CX23885_BOARD_HAUPPAUGE_HVR1200:
 412                 /* GPIO-0 tda10048 demodulator reset */
 413                 /* GPIO-2 tda18271 tuner reset */
 414
 415                 /* Put the parts into reset and back */
 416                 cx_set(GP0_IO, 0x00050000);
 417                 mdelay(20);
 418                 cx_clear(GP0_IO, 0x00000005);
 419                 mdelay(20);
 420                 cx_set(GP0_IO, 0x00050005);
 421                 break;
 422         case CX23885_BOARD_HAUPPAUGE_HVR1700:
 423                 /* GPIO-0 TDA10048 demodulator reset */
 424                 /* GPIO-2 TDA8295A Reset */
 425                 /* GPIO-3-10 cx23417 data0-7 */
 426                 /* GPIO-11-14 cx23417 addr0-3 */
 427                 /* GPIO-15-18 cx23417 READY, CS, RD, WR */
 428
 429                 /* The following GPIO's are on the interna AVCore (cx25840) */
 430                 /* GPIO-19 IR_RX */
 431                 /* GPIO-20 IR_TX 416/DVBT Select */
 432                 /* GPIO-21 IIS DAT */
 433                 /* GPIO-22 IIS WCLK */
 434                 /* GPIO-23 IIS BCLK */
 435
 436                 /* Put the parts into reset and back */
 437                 cx_set(GP0_IO, 0x00050000);
 438                 mdelay(20);
 439                 cx_clear(GP0_IO, 0x00000005);
 440                 mdelay(20);
 441                 cx_set(GP0_IO, 0x00050005);
 442                 break;
 443         case CX23885_BOARD_HAUPPAUGE_HVR1400:
 444                 /* GPIO-0  Dibcom7000p demodulator reset */
 445                 /* GPIO-2  xc3028L tuner reset */
 446                 /* GPIO-13 LED */
 447
 448                 /* Put the parts into reset and back */
 449                 cx_set(GP0_IO, 0x00050000);
 450                 mdelay(20);
 451                 cx_clear(GP0_IO, 0x00000005);
 452                 mdelay(20);
 453                 cx_set(GP0_IO, 0x00050005);
 454                 break;
 455         case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
 456                 /* GPIO-0 xc5000 tuner reset i2c bus 0 */
 457                 /* GPIO-1 s5h1409 demod reset i2c bus 0 */
 458                 /* GPIO-2 xc5000 tuner reset i2c bus 1 */
 459                 /* GPIO-3 s5h1409 demod reset i2c bus 0 */
 460
 461                 /* Put the parts into reset and back */
 462                 cx_set(GP0_IO, 0x000f0000);
 463                 mdelay(20);
 464                 cx_clear(GP0_IO, 0x0000000f);
 465                 mdelay(20);
 466                 cx_set(GP0_IO, 0x000f000f);
 467                 break;
 468         }
 469 }
 470
 471 int cx23885_ir_init(struct cx23885_dev *dev)
 472 {
 473         switch (dev->board) {
 474         case CX23885_BOARD_HAUPPAUGE_HVR1250:
 475         case CX23885_BOARD_HAUPPAUGE_HVR1500:
 476         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 477         case CX23885_BOARD_HAUPPAUGE_HVR1800:
 478         case CX23885_BOARD_HAUPPAUGE_HVR1200:
 479         case CX23885_BOARD_HAUPPAUGE_HVR1400:
 480                 /* FIXME: Implement me */
 481                 break;
 482         }
 483
 484         return 0;
 485 }
 486
 487 void cx23885_card_setup(struct cx23885_dev *dev)
 488 {
 489         struct cx23885_tsport *ts1 = &dev->ts1;
 490         struct cx23885_tsport *ts2 = &dev->ts2;
 491
 492         static u8 eeprom[256];
 493
 494         if (dev->i2c_bus[0].i2c_rc == 0) {
 495                 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
 496                 tveeprom_read(&dev->i2c_bus[0].i2c_client,
 497                               eeprom, sizeof(eeprom));
 498         }
 499
 500         switch (dev->board) {
 501         case CX23885_BOARD_HAUPPAUGE_HVR1250:
 502         case CX23885_BOARD_HAUPPAUGE_HVR1500:
 503         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 504         case CX23885_BOARD_HAUPPAUGE_HVR1400:
 505                 if (dev->i2c_bus[0].i2c_rc == 0)
 506                         hauppauge_eeprom(dev, eeprom+0x80);
 507                 break;
 508         case CX23885_BOARD_HAUPPAUGE_HVR1800:
 509         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 510         case CX23885_BOARD_HAUPPAUGE_HVR1200:
 511         case CX23885_BOARD_HAUPPAUGE_HVR1700:
 512                 if (dev->i2c_bus[0].i2c_rc == 0)
 513                         hauppauge_eeprom(dev, eeprom+0xc0);
 514                 break;
 515         }
 516
 517         switch (dev->board) {
 518         case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
 519                 ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 520                 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 521                 ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 522                 /* break omitted intentionally */
 523         case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
 524                 ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 525                 ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 526                 ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 527                 break;
 528         case CX23885_BOARD_HAUPPAUGE_HVR1800:
 529                 /* Defaults for VID B - Analog encoder */
 530                 /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
 531                 ts1->gen_ctrl_val    = 0x10e;
 532                 ts1->ts_clk_en_val   = 0x1; /* Enable TS_CLK */
 533                 ts1->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 534
 535                 /* APB_TSVALERR_POL (active low)*/
 536                 ts1->vld_misc_val    = 0x2000;
 537                 ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);
 538
 539                 /* Defaults for VID C */
 540                 ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 541                 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 542                 ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 543                 break;
 544         case CX23885_BOARD_HAUPPAUGE_HVR1250:
 545         case CX23885_BOARD_HAUPPAUGE_HVR1500:
 546         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 547         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 548         case CX23885_BOARD_HAUPPAUGE_HVR1200:
 549         case CX23885_BOARD_HAUPPAUGE_HVR1700:
 550         case CX23885_BOARD_HAUPPAUGE_HVR1400:
 551         default:
 552                 ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 553                 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 554                 ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 555         }
 556
 557         /* Certain boards support analog, or require the avcore to be
 558          * loaded, ensure this happens.
 559          */
 560         switch (dev->board) {
 561         case CX23885_BOARD_HAUPPAUGE_HVR1800:
 562         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 563         case CX23885_BOARD_HAUPPAUGE_HVR1700:
 564                 request_module("cx25840");
 565                 break;
 566         }
 567 }
 568
 569 /* ------------------------------------------------------------------ */
 570
 571 /*
 572  * Local variables:
 573  * c-basic-offset: 8
 574  * End:
 575  * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
 576  */