2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
27 config VIDEOBUF_DMA_CONTIG
46 depends on MEDIA_TUNER
49 # Multimedia Video device configuration
52 menuconfig VIDEO_CAPTURE_DRIVERS
53 bool "Video capture adapters"
57 Say Y here to enable selecting the video adapters for
58 webcams, analog TV, and hybrid analog/digital TV.
59 Some of those devices also supports FM radio.
61 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
63 config VIDEO_ADV_DEBUG
64 bool "Enable advanced debug functionality"
67 Say Y here to enable advanced debugging functionality on some
71 config VIDEO_FIXED_MINOR_RANGES
72 bool "Enable old-style fixed minor ranges for video devices"
75 Say Y here to enable the old-style fixed-range minor assignments.
76 Only useful if you rely on the old behavior and use mknod instead of udev.
80 config VIDEO_HELPER_CHIPS_AUTO
81 bool "Autoselect pertinent encoders/decoders and other helper chips"
84 Most video cards may require additional modules to encode or
85 decode audio/video standards. This option will autoselect
86 all pertinent modules to each selected video module.
88 Unselect this only if you know exactly what you are doing, since
89 it may break support on some boards.
94 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
95 depends on I2C && VIDEO_IR
98 Most boards have an IR chip directly connected via GPIO. However,
99 some video boards have the IR connected via I2C bus.
101 If your board doesn't have an I2C IR chip, you may disable this
107 # Encoder / Decoder module configuration
110 menu "Encoders/decoders and other helper chips"
111 depends on !VIDEO_HELPER_CHIPS_AUTO
113 comment "Audio decoders"
116 tristate "Simple audio decoder chips"
117 depends on VIDEO_V4L2 && I2C
119 Support for several audio decoder chips found on some bt8xx boards:
120 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
121 tea6320, tea6420, tda8425, ta8874z.
122 Microchip: pic16c54 based design on ProVideo PV951 board.
124 To compile this driver as a module, choose M here: the
125 module will be called tvaudio.
128 tristate "Philips TDA7432 audio processor"
129 depends on VIDEO_V4L2 && I2C
131 Support for tda7432 audio decoder chip found on some bt8xx boards.
133 To compile this driver as a module, choose M here: the
134 module will be called tda7432.
137 tristate "Philips TDA9840 audio processor"
140 Support for tda9840 audio decoder chip found on some Zoran boards.
142 To compile this driver as a module, choose M here: the
143 module will be called tda9840.
146 tristate "Philips TDA9875 audio processor"
147 depends on VIDEO_V4L2 && I2C
149 Support for tda9875 audio decoder chip found on some bt8xx boards.
151 To compile this driver as a module, choose M here: the
152 module will be called tda9875.
154 config VIDEO_TEA6415C
155 tristate "Philips TEA6415C audio processor"
158 Support for tea6415c audio decoder chip found on some bt8xx boards.
160 To compile this driver as a module, choose M here: the
161 module will be called tea6415c.
164 tristate "Philips TEA6420 audio processor"
167 Support for tea6420 audio decoder chip found on some bt8xx boards.
169 To compile this driver as a module, choose M here: the
170 module will be called tea6420.
173 tristate "Micronas MSP34xx audio decoders"
174 depends on VIDEO_V4L2 && I2C
176 Support for the Micronas MSP34xx series of audio decoders.
178 To compile this driver as a module, choose M here: the
179 module will be called msp3400.
182 tristate "Cirrus Logic CS5345 audio ADC"
183 depends on VIDEO_V4L2 && I2C
185 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
186 stereo A/D converter.
188 To compile this driver as a module, choose M here: the
189 module will be called cs5345.
191 config VIDEO_CS53L32A
192 tristate "Cirrus Logic CS53L32A audio ADC"
193 depends on VIDEO_V4L2 && I2C
195 Support for the Cirrus Logic CS53L32A low voltage
196 stereo A/D converter.
198 To compile this driver as a module, choose M here: the
199 module will be called cs53l32a.
202 tristate "Mitsubishi M52790 A/V switch"
203 depends on VIDEO_V4L2 && I2C
205 Support for the Mitsubishi M52790 A/V switch.
207 To compile this driver as a module, choose M here: the
208 module will be called m52790.
210 config VIDEO_TLV320AIC23B
211 tristate "Texas Instruments TLV320AIC23B audio codec"
212 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
214 Support for the Texas Instruments TLV320AIC23B audio codec.
216 To compile this driver as a module, choose M here: the
217 module will be called tlv320aic23b.
220 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
221 depends on VIDEO_V4L2 && I2C
223 Support for the Wolfson Microelectronics WM8775 high
224 performance stereo A/D Converter with a 4 channel input mixer.
226 To compile this driver as a module, choose M here: the
227 module will be called wm8775.
230 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
231 depends on VIDEO_V4L2 && I2C
233 Support for the Wolfson Microelectronics WM8739
234 stereo A/D Converter.
236 To compile this driver as a module, choose M here: the
237 module will be called wm8739.
239 config VIDEO_VP27SMPX
240 tristate "Panasonic VP27s internal MPX"
241 depends on VIDEO_V4L2 && I2C
243 Support for the internal MPX of the Panasonic VP27s tuner.
245 To compile this driver as a module, choose M here: the
246 module will be called vp27smpx.
248 comment "RDS decoders"
251 tristate "SAA6588 Radio Chip RDS decoder support"
252 depends on VIDEO_V4L2 && I2C
255 Support for this Radio Data System (RDS) decoder. This allows
256 seeing radio station identification transmitted using this
259 To compile this driver as a module, choose M here: the
260 module will be called saa6588.
262 comment "Video decoders"
265 tristate "Analog Devices ADV7180 decoder"
266 depends on VIDEO_V4L2 && I2C
268 Support for the Analog Devices ADV7180 video decoder.
270 To compile this driver as a module, choose M here: the
271 module will be called adv7180.
274 tristate "BT819A VideoStream decoder"
275 depends on VIDEO_V4L2 && I2C
277 Support for BT819A video decoder.
279 To compile this driver as a module, choose M here: the
280 module will be called bt819.
283 tristate "BT856 VideoStream decoder"
284 depends on VIDEO_V4L2 && I2C
286 Support for BT856 video decoder.
288 To compile this driver as a module, choose M here: the
289 module will be called bt856.
292 tristate "BT866 VideoStream decoder"
293 depends on VIDEO_V4L2 && I2C
295 Support for BT866 video decoder.
297 To compile this driver as a module, choose M here: the
298 module will be called bt866.
301 tristate "KS0127 video decoder"
302 depends on VIDEO_V4L2 && I2C
304 Support for KS0127 video decoder.
306 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
309 To compile this driver as a module, choose M here: the
310 module will be called ks0127.
313 tristate "OmniVision OV7670 sensor support"
314 depends on I2C && VIDEO_V4L2
316 This is a Video4Linux2 sensor-level driver for the OmniVision
317 OV7670 VGA camera. It currently only works with the M88ALP01
321 tristate "Micron mt9v011 sensor support"
322 depends on I2C && VIDEO_V4L2
324 This is a Video4Linux2 sensor-level driver for the Micron
325 mt0v011 1.3 Mpixel camera. It currently only works with the
329 tristate "TCM825x camera sensor support"
330 depends on I2C && VIDEO_V4L2
332 This is a driver for the Toshiba TCM825x VGA camera sensor.
333 It is used for example in Nokia N800.
336 tristate "Philips SAA7110 video decoder"
337 depends on VIDEO_V4L2 && I2C
339 Support for the Philips SAA7110 video decoders.
341 To compile this driver as a module, choose M here: the
342 module will be called saa7110.
345 tristate "Philips SAA7111/3/4/5 video decoders"
346 depends on VIDEO_V4L2 && I2C
348 Support for the Philips SAA7111/3/4/5 video decoders.
350 To compile this driver as a module, choose M here: the
351 module will be called saa7115.
354 tristate "Philips SAA7171/3/4 audio/video decoders"
355 depends on VIDEO_V4L2 && I2C
357 Support for the Philips SAA7171/3/4 audio/video decoders.
359 To compile this driver as a module, choose M here: the
360 module will be called saa717x.
363 tristate "Philips SAA7191 video decoder"
364 depends on VIDEO_V4L2 && I2C
366 Support for the Philips SAA7191 video decoder.
368 To compile this driver as a module, choose M here: the
369 module will be called saa7191.
372 tristate "Texas Instruments TVP514x video decoder"
373 depends on VIDEO_V4L2 && I2C
375 This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
376 decoder. It is currently working with the TI OMAP3 camera
379 To compile this driver as a module, choose M here: the
380 module will be called tvp514x.
383 tristate "Texas Instruments TVP5150 video decoder"
384 depends on VIDEO_V4L2 && I2C
386 Support for the Texas Instruments TVP5150 video decoder.
388 To compile this driver as a module, choose M here: the
389 module will be called tvp5150.
392 tristate "Texas Instruments TVP7002 video decoder"
393 depends on VIDEO_V4L2 && I2C
395 Support for the Texas Instruments TVP7002 video decoder.
397 To compile this driver as a module, choose M here: the
398 module will be called tvp7002.
401 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
402 depends on VIDEO_V4L2 && I2C
404 Support for VPX322x video decoders.
406 To compile this driver as a module, choose M here: the
407 module will be called vpx3220.
409 comment "Video and audio decoders"
411 source "drivers/media/video/cx25840/Kconfig"
413 comment "MPEG video encoders"
416 tristate "Conexant CX2341x MPEG encoders"
417 depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
419 Support for the Conexant CX23416 MPEG encoders
420 and CX23415 MPEG encoder/decoders.
422 This module currently supports the encoding functions only.
424 To compile this driver as a module, choose M here: the
425 module will be called cx2341x.
427 comment "Video encoders"
430 tristate "Philips SAA7127/9 digital video encoders"
431 depends on VIDEO_V4L2 && I2C
433 Support for the Philips SAA7127/9 digital video encoders.
435 To compile this driver as a module, choose M here: the
436 module will be called saa7127.
439 tristate "Philips SAA7185 video encoder"
440 depends on VIDEO_V4L2 && I2C
442 Support for the Philips SAA7185 video encoder.
444 To compile this driver as a module, choose M here: the
445 module will be called saa7185.
448 tristate "Analog Devices ADV7170 video encoder"
449 depends on VIDEO_V4L2 && I2C
451 Support for the Analog Devices ADV7170 video encoder driver
453 To compile this driver as a module, choose M here: the
454 module will be called adv7170.
457 tristate "Analog Devices ADV7175 video encoder"
458 depends on VIDEO_V4L2 && I2C
460 Support for the Analog Devices ADV7175 video encoder driver
462 To compile this driver as a module, choose M here: the
463 module will be called adv7175.
466 tristate "THS7303 Video Amplifier"
469 Support for TI THS7303 video amplifier
471 To compile this driver as a module, choose M here: the
472 module will be called ths7303.
475 tristate "ADV7343 video encoder"
478 Support for Analog Devices I2C bus based ADV7343 encoder.
480 To compile this driver as a module, choose M here: the
481 module will be called adv7343.
484 tristate "AK8813/AK8814 video encoders"
487 Video output driver for AKM AK8813 and AK8814 TV encoders
489 comment "Video improvement chips"
491 config VIDEO_UPD64031A
492 tristate "NEC Electronics uPD64031A Ghost Reduction"
493 depends on VIDEO_V4L2 && I2C
495 Support for the NEC Electronics uPD64031A Ghost Reduction
496 video chip. It is most often found in NTSC TV cards made for
497 Japan and is used to reduce the 'ghosting' effect that can
498 be present in analog TV broadcasts.
500 To compile this driver as a module, choose M here: the
501 module will be called upd64031a.
503 config VIDEO_UPD64083
504 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
505 depends on VIDEO_V4L2 && I2C
507 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
508 separation video chip. It is used to improve the quality of
509 the colors of a composite signal.
511 To compile this driver as a module, choose M here: the
512 module will be called upd64083.
514 endmenu # encoder / decoder chips
516 config DISPLAY_DAVINCI_DM646X_EVM
517 tristate "DM646x EVM Video Display"
518 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
519 select VIDEOBUF_DMA_CONTIG
520 select VIDEO_DAVINCI_VPIF
524 Support for DM6467 based display device.
526 To compile this driver as a module, choose M here: the
527 module will be called vpif_display.
530 tristate "SuperH VOU video output driver"
531 depends on VIDEO_DEV && ARCH_SHMOBILE
532 select VIDEOBUF_DMA_CONTIG
534 Support for the Video Output Unit (VOU) on SuperH SoCs.
536 config CAPTURE_DAVINCI_DM646X_EVM
537 tristate "DM646x EVM Video Capture"
538 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
539 select VIDEOBUF_DMA_CONTIG
540 select VIDEO_DAVINCI_VPIF
542 Support for DM6467 based capture device.
544 To compile this driver as a module, choose M here: the
545 module will be called vpif_capture.
547 config VIDEO_DAVINCI_VPIF
548 tristate "DaVinci VPIF Driver"
549 depends on DISPLAY_DAVINCI_DM646X_EVM
551 Support for DaVinci VPIF Driver.
553 To compile this driver as a module, choose M here: the
554 module will be called vpif.
557 tristate "Virtual Video Driver"
558 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
560 select VIDEOBUF_VMALLOC
563 Enables a virtual video driver. This device shows a color bar
564 and a timestamp, as a real device would generate by using V4L2
566 Say Y here if you want to test video apps or debug V4L devices.
569 config VIDEO_VPSS_SYSTEM
570 tristate "VPSS System module driver"
571 depends on ARCH_DAVINCI
573 Support for vpss system module for video driver
575 config VIDEO_VPFE_CAPTURE
576 tristate "VPFE Video Capture Driver"
577 depends on VIDEO_V4L2 && ARCH_DAVINCI
578 select VIDEOBUF_DMA_CONTIG
580 Support for DMXXXX VPFE based frame grabber. This is the
581 common V4L2 module for following DMXXX SoCs from Texas
582 Instruments:- DM6446 & DM355.
584 To compile this driver as a module, choose M here: the
585 module will be called vpfe-capture.
587 config VIDEO_DM6446_CCDC
588 tristate "DM6446 CCDC HW module"
589 depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
590 select VIDEO_VPSS_SYSTEM
593 Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
594 with decoder modules such as TVP5146 over BT656 or
595 sensor module such as MT9T001 over a raw interface. This
596 module configures the interface and CCDC/ISIF to do
597 video frame capture from slave decoders.
599 To compile this driver as a module, choose M here: the
600 module will be called vpfe.
602 config VIDEO_DM355_CCDC
603 tristate "DM355 CCDC HW module"
604 depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
605 select VIDEO_VPSS_SYSTEM
608 Enables DM355 CCD hw module. DM355 CCDC hw interfaces
609 with decoder modules such as TVP5146 over BT656 or
610 sensor module such as MT9T001 over a raw interface. This
611 module configures the interface and CCDC/ISIF to do
612 video frame capture from a slave decoders
614 To compile this driver as a module, choose M here: the
615 module will be called vpfe.
618 tristate "ISIF HW module"
619 depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
620 select VIDEO_VPSS_SYSTEM
623 Enables ISIF hw module. This is the hardware module for
624 configuring ISIF in VPFE to capture Raw Bayer RGB data from
625 a image sensor or YUV data from a YUV source.
627 To compile this driver as a module, choose M here: the
628 module will be called vpfe.
630 source "drivers/media/video/bt8xx/Kconfig"
633 tristate "Mediavision Pro Movie Studio Video For Linux"
634 depends on ISA && VIDEO_V4L2
636 Say Y if you have such a thing.
638 To compile this driver as a module, choose M here: the
639 module will be called pms.
642 tristate "Quickcam BW Video For Linux"
643 depends on PARPORT && VIDEO_V4L1
645 Say Y have if you the black and white version of the QuickCam
646 camera. See the next option for the color version.
648 To compile this driver as a module, choose M here: the
649 module will be called bw-qcam.
652 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
653 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
655 This is the video4linux driver for the colour version of the
656 Connectix QuickCam. If you have one of these cameras, say Y here,
657 otherwise say N. This driver does not work with the original
658 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
659 as a module (c-qcam).
660 Read <file:Documentation/video4linux/CQcam.txt> for more information.
663 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
664 depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
666 Video4linux driver for Winbond's w9966 based Webcams.
667 Currently tested with the LifeView FlyCam Supra.
668 If you have one of these cameras, say Y here
670 This driver is also available as a module (w9966).
672 Check out <file:Documentation/video4linux/w9966.txt> for more
676 tristate "CPiA Video For Linux (DEPRECATED)"
677 depends on VIDEO_V4L1
680 This driver is DEPRECATED please use the gspca cpia1 module
681 instead. Note that you need atleast version 0.6.4 of libv4l for
682 the cpia1 gspca module.
684 This is the video4linux driver for cameras based on Vision's CPiA
685 (Colour Processor Interface ASIC), such as the Creative Labs Video
686 Blaster Webcam II. If you have one of these cameras, say Y here
687 and select parallel port and/or USB lowlevel support below,
688 otherwise say N. This will not work with the Creative Webcam III.
690 Please read <file:Documentation/video4linux/README.cpia> for more
693 This driver is also available as a module (cpia).
696 tristate "CPiA Parallel Port Lowlevel Support"
697 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
699 This is the lowlevel parallel port support for cameras based on
700 Vision's CPiA (Colour Processor Interface ASIC), such as the
701 Creative Webcam II. If you have the parallel port version of one
702 of these cameras, say Y here, otherwise say N. It is also available
703 as a module (cpia_pp).
705 config VIDEO_CPIA_USB
706 tristate "CPiA USB Lowlevel Support"
707 depends on VIDEO_CPIA && USB
709 This is the lowlevel USB support for cameras based on Vision's CPiA
710 (Colour Processor Interface ASIC), such as the Creative Webcam II.
711 If you have the USB version of one of these cameras, say Y here,
712 otherwise say N. This will not work with the Creative Webcam III.
713 It is also available as a module (cpia_usb).
715 source "drivers/media/video/cpia2/Kconfig"
717 config VIDEO_SAA5246A
718 tristate "SAA5246A, SAA5281 Teletext processor"
719 depends on I2C && VIDEO_V4L2
721 Support for I2C bus based teletext using the SAA5246A or SAA5281
722 chip. Useful only if you live in Europe.
724 To compile this driver as a module, choose M here: the
725 module will be called saa5246a.
728 tristate "SAA5249 Teletext processor"
729 depends on I2C && VIDEO_V4L2
731 Support for I2C bus based teletext using the SAA5249 chip. At the
732 moment this is only useful on some European WinTV cards.
734 To compile this driver as a module, choose M here: the
735 module will be called saa5249.
738 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
739 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
740 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
742 Say Y here to build in support for the Vino video input system found
743 on SGI Indy machines.
746 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
747 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
749 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
750 driver for PCI. There is a product page at
751 <http://www.stradis.com/>.
753 source "drivers/media/video/zoran/Kconfig"
756 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
757 depends on PCI && SONY_LAPTOP && VIDEO_V4L2
759 This is the video4linux driver for the Motion Eye camera found
760 in the Vaio Picturebook laptops. Please read the material in
761 <file:Documentation/video4linux/meye.txt> for more information.
763 If you say Y or M here, you need to say Y or M to "Sony Laptop
764 Extras" in the misc device section.
766 To compile this driver as a module, choose M here: the
767 module will be called meye.
769 source "drivers/media/video/saa7134/Kconfig"
772 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
773 depends on PCI && VIDEO_V4L2 && I2C
774 select VIDEO_SAA7146_VV
776 select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
777 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
778 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
779 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
781 This is a video4linux driver for the 'Multimedia eXtension Board'
782 TV card by Siemens-Nixdorf.
784 To compile this driver as a module, choose M here: the
785 module will be called mxb.
787 config VIDEO_HEXIUM_ORION
788 tristate "Hexium HV-PCI6 and Orion frame grabber"
789 depends on PCI && VIDEO_V4L2 && I2C
790 select VIDEO_SAA7146_VV
792 This is a video4linux driver for the Hexium HV-PCI6 and
793 Orion frame grabber cards by Hexium.
795 To compile this driver as a module, choose M here: the
796 module will be called hexium_orion.
798 config VIDEO_HEXIUM_GEMINI
799 tristate "Hexium Gemini frame grabber"
800 depends on PCI && VIDEO_V4L2 && I2C
801 select VIDEO_SAA7146_VV
803 This is a video4linux driver for the Hexium Gemini frame
804 grabber card by Hexium. Please note that the Gemini Dual
805 card is *not* fully supported.
807 To compile this driver as a module, choose M here: the
808 module will be called hexium_gemini.
810 source "drivers/media/video/cx88/Kconfig"
812 source "drivers/media/video/cx23885/Kconfig"
814 source "drivers/media/video/au0828/Kconfig"
816 source "drivers/media/video/ivtv/Kconfig"
818 source "drivers/media/video/cx18/Kconfig"
820 source "drivers/media/video/saa7164/Kconfig"
823 tristate "AR devices"
824 depends on M32R && VIDEO_V4L2
826 This is a video4linux driver for the Renesas AR (Artificial Retina)
829 config VIDEO_M32R_AR_M64278
830 tristate "AR device with color module M64278(VGA)"
831 depends on PLAT_M32700UT
834 This is a video4linux driver for the Renesas AR (Artificial
835 Retina) with M64278E-800 camera module.
836 This module supports VGA(640x480 pixels) resolutions.
838 To compile this driver as a module, choose M here: the
839 module will be called arv.
841 config VIDEO_CAFE_CCIC
842 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
843 depends on PCI && I2C && VIDEO_V4L2
846 This is a video4linux2 driver for the Marvell 88ALP01 integrated
847 CMOS camera controller. This is the controller found on first-
848 generation OLPC systems.
851 tristate "SoC camera support"
852 depends on VIDEO_V4L2 && HAS_DMA && I2C
855 SoC Camera is a common API to several cameras, not connecting
856 over a bus like PCI or USB. For example some i2c camera connected
857 directly to the data bus of an SoC.
859 config SOC_CAMERA_MT9M001
860 tristate "mt9m001 support"
861 depends on SOC_CAMERA && I2C
862 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
864 This driver supports MT9M001 cameras from Micron, monochrome
867 config SOC_CAMERA_MT9M111
868 tristate "mt9m111 and mt9m112 support"
869 depends on SOC_CAMERA && I2C
871 This driver supports MT9M111 and MT9M112 cameras from Micron
873 config SOC_CAMERA_MT9T031
874 tristate "mt9t031 support"
875 depends on SOC_CAMERA && I2C
877 This driver supports MT9T031 cameras from Micron.
879 config SOC_CAMERA_MT9T112
880 tristate "mt9t112 support"
881 depends on SOC_CAMERA && I2C
883 This driver supports MT9T112 cameras from Aptina.
885 config SOC_CAMERA_MT9V022
886 tristate "mt9v022 support"
887 depends on SOC_CAMERA && I2C
888 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
890 This driver supports MT9V022 cameras from Micron
892 config SOC_CAMERA_RJ54N1
893 tristate "rj54n1cb0c support"
894 depends on SOC_CAMERA && I2C
896 This is a rj54n1cb0c video driver
898 config SOC_CAMERA_TW9910
899 tristate "tw9910 support"
900 depends on SOC_CAMERA && I2C
902 This is a tw9910 video driver
904 config SOC_CAMERA_PLATFORM
905 tristate "platform camera support"
906 depends on SOC_CAMERA
908 This is a generic SoC camera platform driver, useful for testing
910 config SOC_CAMERA_OV772X
911 tristate "ov772x camera support"
912 depends on SOC_CAMERA && I2C
914 This is a ov772x camera driver
916 config SOC_CAMERA_OV9640
917 tristate "ov9640 camera support"
918 depends on SOC_CAMERA && I2C
920 This is a ov9640 camera driver
926 tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
927 depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
929 select VIDEOBUF_DMA_CONTIG
932 This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
938 tristate "i.MX3x Camera Sensor Interface driver"
939 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
940 select VIDEOBUF_DMA_CONTIG
943 This is a v4l2 driver for the i.MX3x Camera Sensor Interface
946 tristate "PXA27x Quick Capture Interface driver"
947 depends on VIDEO_DEV && PXA27x && SOC_CAMERA
948 select VIDEOBUF_DMA_SG
950 This is a v4l2 driver for the PXA27x Quick Capture Interface
952 config VIDEO_SH_MOBILE_CEU
953 tristate "SuperH Mobile CEU Interface driver"
954 depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
955 select VIDEOBUF_DMA_CONTIG
957 This is a v4l2 driver for the SuperH Mobile CEU Interface
960 tristate "OMAP2 Camera Capture Interface driver"
961 depends on VIDEO_DEV && ARCH_OMAP2
962 select VIDEOBUF_DMA_SG
964 This is a v4l2 driver for the TI OMAP2 camera capture interface
967 # USB Multimedia device configuration
970 menuconfig V4L_USB_DRIVERS
971 bool "V4L USB devices"
975 if V4L_USB_DRIVERS && USB
977 source "drivers/media/video/uvc/Kconfig"
979 source "drivers/media/video/gspca/Kconfig"
981 source "drivers/media/video/pvrusb2/Kconfig"
983 source "drivers/media/video/hdpvr/Kconfig"
985 source "drivers/media/video/em28xx/Kconfig"
987 source "drivers/media/video/tlg2300/Kconfig"
989 source "drivers/media/video/cx231xx/Kconfig"
991 source "drivers/media/video/usbvision/Kconfig"
993 source "drivers/media/video/usbvideo/Kconfig"
995 source "drivers/media/video/et61x251/Kconfig"
997 config VIDEO_OVCAMCHIP
998 tristate "OmniVision Camera Chip support (DEPRECATED)"
999 depends on I2C && VIDEO_V4L1
1002 This driver is DEPRECATED please use the gspca ov519 module
1003 instead. Note that for the ov511 / ov518 support of the gspca module
1004 you need atleast version 0.6.0 of libv4l and for the w9968cf
1005 atleast version 0.6.3 of libv4l.
1007 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
1008 This driver is intended to be used with the ov511 and w9968cf USB
1011 To compile this driver as a module, choose M here: the
1012 module will be called ovcamchip.
1015 tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
1016 depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
1019 This driver is DEPRECATED please use the gspca ov519 module
1020 instead. Note that for the w9968cf support of the gspca module
1021 you need atleast version 0.6.3 of libv4l.
1023 Say Y here if you want support for cameras based on OV681 or
1024 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
1026 This driver has an optional plugin, which is distributed as a
1027 separate module only (released under GPL). It allows to use higher
1028 resolutions and framerates, but cannot be included in the official
1029 Linux kernel for performance purposes.
1031 See <file:Documentation/video4linux/w9968cf.txt> for more info.
1033 To compile this driver as a module, choose M here: the
1034 module will be called w9968cf.
1037 tristate "USB OV511 Camera support (DEPRECATED)"
1038 depends on VIDEO_V4L1
1041 This driver is DEPRECATED please use the gspca ov519 module
1042 instead. Note that for the ov511 / ov518 support of the gspca module
1043 you need atleast version 0.6.0 of libv4l.
1045 Say Y here if you want to connect this type of camera to your
1046 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
1047 for more information and for a list of supported cameras.
1049 To compile this driver as a module, choose M here: the
1050 module will be called ov511.
1053 tristate "USB SE401 Camera support"
1054 depends on VIDEO_V4L1
1056 Say Y here if you want to connect this type of camera to your
1057 computer's USB port. See <file:Documentation/video4linux/se401.txt>
1058 for more information and for a list of supported cameras.
1060 To compile this driver as a module, choose M here: the
1061 module will be called se401.
1063 source "drivers/media/video/sn9c102/Kconfig"
1066 tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
1067 depends on VIDEO_V4L1
1070 This driver is DEPRECATED please use the gspca stv0680 module
1071 instead. Note that for the gspca stv0680 module you need
1072 atleast version 0.6.3 of libv4l.
1074 Say Y here if you want to connect this type of camera to your
1075 computer's USB port. This includes the Pencam line of cameras.
1076 See <file:Documentation/video4linux/stv680.txt> for more information
1077 and for a list of supported cameras.
1079 To compile this driver as a module, choose M here: the
1080 module will be called stv680.
1082 source "drivers/media/video/zc0301/Kconfig"
1084 source "drivers/media/video/pwc/Kconfig"
1087 tristate "USB ZR364XX Camera support"
1088 depends on VIDEO_V4L2
1090 select VIDEOBUF_VMALLOC
1092 Say Y here if you want to connect this type of camera to your
1093 computer's USB port.
1094 See <file:Documentation/video4linux/zr364xx.txt> for more info
1095 and list of supported cameras.
1097 To compile this driver as a module, choose M here: the
1098 module will be called zr364xx.
1100 config USB_STKWEBCAM
1101 tristate "USB Syntek DC1125 Camera support"
1102 depends on VIDEO_V4L2 && EXPERIMENTAL
1104 Say Y here if you want to use this type of camera.
1105 Supported devices are typically found in some Asus laptops,
1106 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
1107 may be supported by the stk11xx driver, from which this is
1108 derived, see http://stk11xx.sourceforge.net
1110 To compile this driver as a module, choose M here: the
1111 module will be called stkwebcam.
1114 tristate "USB Sensoray 2255 video capture device"
1115 depends on VIDEO_V4L2
1116 select VIDEOBUF_VMALLOC
1119 Say Y here if you want support for the Sensoray 2255 USB device.
1120 This driver can be compiled as a module, called s2255drv.
1122 endif # V4L_USB_DRIVERS
1123 endif # VIDEO_CAPTURE_DRIVERS