2 * USB driver for Gigaset 307x directly or using M105 Data.
4 * Copyright (c) 2001 by Stefan Eilers
5 * and Hansjoerg Lipp <hjlipp@web.de>.
7 * This driver was derived from the USB skeleton driver by
8 * Greg Kroah-Hartman <greg@kroah.com>
10 * =====================================================================
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 * =====================================================================
19 #include <linux/usb.h>
20 #include <linux/module.h>
21 #include <linux/moduleparam.h>
23 /* Version Information */
24 #define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
25 #define DRIVER_DESC "USB Driver for Gigaset 307x using M105"
27 /* Module parameters */
29 static int startmode = SM_ISDN;
30 static int cidmode = 1;
32 module_param(startmode, int, S_IRUGO);
33 module_param(cidmode, int, S_IRUGO);
34 MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
35 MODULE_PARM_DESC(cidmode, "Call-ID mode");
37 #define GIGASET_MINORS 1
38 #define GIGASET_MINOR 8
39 #define GIGASET_MODULENAME "usb_gigaset"
40 #define GIGASET_DEVNAME "ttyGU"
42 #define IF_WRITEBUF 2000 /* arbitrary limit */
44 /* Values for the Gigaset M105 Data */
45 #define USB_M105_VENDOR_ID 0x0681
46 #define USB_M105_PRODUCT_ID 0x0009
48 /* table of devices that work with this driver */
49 static const struct usb_device_id gigaset_table[] = {
50 { USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
51 { } /* Terminating entry */
54 MODULE_DEVICE_TABLE(usb, gigaset_table);
57 * Control requests (empty fields: 00)
59 * RT|RQ|VALUE|INDEX|LEN |DATA
62 * Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:?
64 * Get device information/status (llll: 0x200 and 0x40 seen).
65 * Real size: I only saw MIN(llll,0x64).
66 * Contents: seems to be always the same...
67 * offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes)
68 * offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0"
72 * Initialize/reset device ?
74 * ? (xx=00 or 01; 01 on start, 00 on close)
76 * Set/clear flags vv=value, mm=mask (see RQ 08)
78 * Used before the following configuration requests are issued
79 * (with xx=0x0f). I've seen other values<0xf, though.
81 * Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1.
83 * Set byte size and parity. p: 0x20=even,0x10=odd,0x00=no parity
84 * [ 0x30: m, 0x40: s ]
85 * [s: 0: 1 stop bit; 1: 1.5; 2: 2]
86 * bb: bits/byte (seen 7 and 8)
87 * 41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00
89 * Initialization: 01, 40, 00, 00
90 * Open device: 00 40, 00, 00
91 * yy and zz seem to be equal, either 0x00 or 0x0a
92 * (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80)
93 * 41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
94 * Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
95 * xx is usually 0x00 but was 0x7e before starting data transfer
96 * in unimodem mode. So, this might be an array of characters that
97 * need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
99 * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
103 /* functions called if a device of this driver is connected/disconnected */
104 static int gigaset_probe(struct usb_interface *interface,
105 const struct usb_device_id *id);
106 static void gigaset_disconnect(struct usb_interface *interface);
108 /* functions called before/after suspend */
109 static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
110 static int gigaset_resume(struct usb_interface *intf);
111 static int gigaset_pre_reset(struct usb_interface *intf);
113 static struct gigaset_driver *driver;
115 /* usb specific object needed to register this driver with the usb subsystem */
116 static struct usb_driver gigaset_usb_driver = {
117 .name = GIGASET_MODULENAME,
118 .probe = gigaset_probe,
119 .disconnect = gigaset_disconnect,
120 .id_table = gigaset_table,
121 .suspend = gigaset_suspend,
122 .resume = gigaset_resume,
123 .reset_resume = gigaset_resume,
124 .pre_reset = gigaset_pre_reset,
125 .post_reset = gigaset_resume,
128 struct usb_cardstate {
129 struct usb_device *udev; /* usb device pointer */
130 struct usb_interface *interface; /* interface for this device */
131 int busy; /* bulk output in progress */
134 unsigned char *bulk_out_buffer;
136 __u8 bulk_out_endpointAddr;
137 struct urb *bulk_out_urb;
140 unsigned char *rcvbuf;
142 struct urb *read_urb;
143 __u8 int_in_endpointAddr;
145 char bchars[6]; /* for request 0x19 */
148 static inline unsigned tiocm_to_gigaset(unsigned state)
150 return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
153 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
156 struct usb_device *udev = cs->hw.usb->udev;
160 mask = tiocm_to_gigaset(old_state ^ new_state);
161 val = tiocm_to_gigaset(new_state);
163 gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
164 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
165 (val & 0xff) | ((mask & 0xff) << 8), 0,
166 NULL, 0, 2000 /* timeout? */);
173 * Set M105 configuration value
174 * using undocumented device commands reverse engineered from USB traces
175 * of the Siemens Windows driver
177 static int set_value(struct cardstate *cs, u8 req, u16 val)
179 struct usb_device *udev = cs->hw.usb->udev;
182 gig_dbg(DEBUG_USBREQ, "request %02x (%04x)",
183 (unsigned)req, (unsigned)val);
184 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41,
185 0xf /*?*/, 0, NULL, 0, 2000 /*?*/);
186 /* no idea what this does */
188 dev_err(&udev->dev, "error %d on request 0x12\n", -r);
192 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41,
193 val, 0, NULL, 0, 2000 /*?*/);
195 dev_err(&udev->dev, "error %d on request 0x%02x\n",
198 r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
199 0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/);
201 dev_err(&udev->dev, "error %d on request 0x19\n", -r2);
203 return r < 0 ? r : (r2 < 0 ? r2 : 0);
207 * set the baud rate on the internal serial adapter
208 * using the undocumented parameter setting command
210 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
218 case B300: rate = 300; break;
219 case B600: rate = 600; break;
220 case B1200: rate = 1200; break;
221 case B2400: rate = 2400; break;
222 case B4800: rate = 4800; break;
223 case B9600: rate = 9600; break;
224 case B19200: rate = 19200; break;
225 case B38400: rate = 38400; break;
226 case B57600: rate = 57600; break;
227 case B115200: rate = 115200; break;
230 dev_err(cs->dev, "unsupported baudrate request 0x%x,"
231 " using default of B9600\n", cflag);
234 val = 0x383fff / rate + 1;
236 return set_value(cs, 1, val);
240 * set the line format on the internal serial adapter
241 * using the undocumented parameter setting command
243 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
249 val |= (cflag & PARODD) ? 0x10 : 0x20;
251 /* set the number of data bits */
252 switch (cflag & CSIZE) {
254 val |= 5 << 8; break;
256 val |= 6 << 8; break;
258 val |= 7 << 8; break;
260 val |= 8 << 8; break;
262 dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n");
267 /* set the number of stop bits */
268 if (cflag & CSTOPB) {
269 if ((cflag & CSIZE) == CS5)
270 val |= 1; /* 1.5 stop bits */
272 val |= 2; /* 2 stop bits */
275 return set_value(cs, 3, val);
279 /*============================================================================*/
280 static int gigaset_init_bchannel(struct bc_state *bcs)
282 /* nothing to do for M10x */
283 gigaset_bchannel_up(bcs);
287 static int gigaset_close_bchannel(struct bc_state *bcs)
289 /* nothing to do for M10x */
290 gigaset_bchannel_down(bcs);
294 static int write_modem(struct cardstate *cs);
295 static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb);
298 /* Write tasklet handler: Continue sending current skb, or send command, or
299 * start sending an skb from the send queue.
301 static void gigaset_modem_fill(unsigned long data)
303 struct cardstate *cs = (struct cardstate *) data;
304 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
308 gig_dbg(DEBUG_OUTPUT, "modem_fill");
310 if (cs->hw.usb->busy) {
311 gig_dbg(DEBUG_OUTPUT, "modem_fill: busy");
317 if (!bcs->tx_skb) { /* no skb is being sent */
319 if (cb) { /* commands to send? */
320 gig_dbg(DEBUG_OUTPUT, "modem_fill: cb");
321 if (send_cb(cs, cb) < 0) {
322 gig_dbg(DEBUG_OUTPUT,
323 "modem_fill: send_cb failed");
324 again = 1; /* no callback will be
327 } else { /* skbs to send? */
328 bcs->tx_skb = skb_dequeue(&bcs->squeue);
331 "Dequeued skb (Adr: %lx)!",
332 (unsigned long) bcs->tx_skb);
337 gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb");
338 if (write_modem(cs) < 0) {
339 gig_dbg(DEBUG_OUTPUT,
340 "modem_fill: write_modem failed");
341 again = 1; /* no callback will be called! */
348 * Interrupt Input URB completion routine
350 static void gigaset_read_int_callback(struct urb *urb)
352 struct cardstate *cs = urb->context;
353 struct inbuf_t *inbuf = cs->inbuf;
354 int status = urb->status;
361 numbytes = urb->actual_length;
364 src = cs->hw.usb->rcvbuf;
367 "%s: There was no leading 0, but 0x%02x!\n",
368 __func__, (unsigned) *src);
369 ++src; /* skip leading 0x00 */
371 if (gigaset_fill_inbuf(inbuf, src, numbytes)) {
372 gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
373 gigaset_schedule_event(inbuf->cs);
376 gig_dbg(DEBUG_INTR, "Received zero block length");
378 /* The urb might have been killed. */
379 gig_dbg(DEBUG_ANY, "%s - nonzero status received: %d",
381 if (status == -ENOENT || status == -ESHUTDOWN)
382 /* killed or endpoint shutdown: don't resubmit */
387 spin_lock_irqsave(&cs->lock, flags);
388 if (!cs->connected) {
389 spin_unlock_irqrestore(&cs->lock, flags);
390 pr_err("%s: disconnected\n", __func__);
393 r = usb_submit_urb(urb, GFP_ATOMIC);
394 spin_unlock_irqrestore(&cs->lock, flags);
396 dev_err(cs->dev, "error %d resubmitting URB\n", -r);
400 /* This callback routine is called when data was transmitted to the device. */
401 static void gigaset_write_bulk_callback(struct urb *urb)
403 struct cardstate *cs = urb->context;
404 int status = urb->status;
408 case 0: /* normal completion */
410 case -ENOENT: /* killed */
411 gig_dbg(DEBUG_ANY, "%s: killed", __func__);
412 cs->hw.usb->busy = 0;
415 dev_err(cs->dev, "bulk transfer failed (status %d)\n",
417 /* That's all we can do. Communication problems
418 are handled by timeouts or network protocols. */
421 spin_lock_irqsave(&cs->lock, flags);
422 if (!cs->connected) {
423 pr_err("%s: disconnected\n", __func__);
425 cs->hw.usb->busy = 0;
426 tasklet_schedule(&cs->write_tasklet);
428 spin_unlock_irqrestore(&cs->lock, flags);
431 static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
433 struct cmdbuf_t *tcb;
436 int status = -ENOENT;
437 struct usb_cardstate *ucs = cs->hw.usb;
443 spin_lock_irqsave(&cs->cmdlock, flags);
444 cs->cmdbytes -= cs->curlen;
445 gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
446 cs->curlen, cs->cmdbytes);
447 cs->cmdbuf = cb = cb->next;
450 cs->curlen = cb->len;
452 cs->lastcmdbuf = NULL;
455 spin_unlock_irqrestore(&cs->cmdlock, flags);
457 if (tcb->wake_tasklet)
458 tasklet_schedule(tcb->wake_tasklet);
462 count = min(cb->len, ucs->bulk_out_size);
463 gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
465 usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
466 usb_sndbulkpipe(ucs->udev,
467 ucs->bulk_out_endpointAddr & 0x0f),
468 cb->buf + cb->offset, count,
469 gigaset_write_bulk_callback, cs);
475 spin_lock_irqsave(&cs->lock, flags);
476 status = cs->connected ?
477 usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
479 spin_unlock_irqrestore(&cs->lock, flags);
484 "could not submit urb (error %d)\n",
486 cb->len = 0; /* skip urb => remove cb+wakeup
487 in next loop cycle */
490 } while (cb && status); /* next command on error */
495 /* Send command to device. */
496 static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
497 int len, struct tasklet_struct *wake_tasklet)
502 gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
503 DEBUG_TRANSCMD : DEBUG_LOCKCMD,
504 "CMD Transmit", len, buf);
508 cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
510 dev_err(cs->dev, "%s: out of memory\n", __func__);
514 memcpy(cb->buf, buf, len);
518 cb->wake_tasklet = wake_tasklet;
520 spin_lock_irqsave(&cs->cmdlock, flags);
521 cb->prev = cs->lastcmdbuf;
523 cs->lastcmdbuf->next = cb;
530 spin_unlock_irqrestore(&cs->cmdlock, flags);
532 spin_lock_irqsave(&cs->lock, flags);
534 tasklet_schedule(&cs->write_tasklet);
535 spin_unlock_irqrestore(&cs->lock, flags);
539 static int gigaset_write_room(struct cardstate *cs)
543 bytes = cs->cmdbytes;
544 return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
547 static int gigaset_chars_in_buffer(struct cardstate *cs)
553 * set the break characters on the internal serial adapter
554 * using undocumented device commands reverse engineered from USB traces
555 * of the Siemens Windows driver
557 static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
559 struct usb_device *udev = cs->hw.usb->udev;
561 gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
562 memcpy(cs->hw.usb->bchars, buf, 6);
563 return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
564 0, 0, &buf, 6, 2000);
567 static int gigaset_freebcshw(struct bc_state *bcs)
573 /* Initialize the b-channel structure */
574 static int gigaset_initbcshw(struct bc_state *bcs)
581 static void gigaset_reinitbcshw(struct bc_state *bcs)
583 /* nothing to do for M10x */
586 static void gigaset_freecshw(struct cardstate *cs)
588 tasklet_kill(&cs->write_tasklet);
592 static int gigaset_initcshw(struct cardstate *cs)
594 struct usb_cardstate *ucs;
597 kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
599 pr_err("out of memory\n");
607 ucs->bchars[4] = 0x11;
608 ucs->bchars[5] = 0x13;
609 ucs->bulk_out_buffer = NULL;
610 ucs->bulk_out_urb = NULL;
611 ucs->read_urb = NULL;
612 tasklet_init(&cs->write_tasklet,
613 gigaset_modem_fill, (unsigned long) cs);
618 /* Send data from current skb to the device. */
619 static int write_modem(struct cardstate *cs)
623 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
624 struct usb_cardstate *ucs = cs->hw.usb;
627 gig_dbg(DEBUG_OUTPUT, "len: %d...", bcs->tx_skb->len);
629 if (!bcs->tx_skb->len) {
630 dev_kfree_skb_any(bcs->tx_skb);
635 /* Copy data to bulk out buffer and transmit data */
636 count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
637 skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
638 skb_pull(bcs->tx_skb, count);
640 gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count);
642 spin_lock_irqsave(&cs->lock, flags);
644 usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
645 usb_sndbulkpipe(ucs->udev,
646 ucs->bulk_out_endpointAddr &
648 ucs->bulk_out_buffer, count,
649 gigaset_write_bulk_callback, cs);
650 ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
654 spin_unlock_irqrestore(&cs->lock, flags);
657 dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
661 if (!bcs->tx_skb->len) {
662 /* skb sent completely */
663 gigaset_skb_sent(bcs, bcs->tx_skb);
665 gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
666 (unsigned long) bcs->tx_skb);
667 dev_kfree_skb_any(bcs->tx_skb);
674 static int gigaset_probe(struct usb_interface *interface,
675 const struct usb_device_id *id)
678 struct usb_device *udev = interface_to_usbdev(interface);
679 struct usb_host_interface *hostif = interface->cur_altsetting;
680 struct cardstate *cs = NULL;
681 struct usb_cardstate *ucs = NULL;
682 struct usb_endpoint_descriptor *endpoint;
685 gig_dbg(DEBUG_ANY, "%s: Check if device matches ...", __func__);
687 /* See if the device offered us matches what we can accept */
688 if ((le16_to_cpu(udev->descriptor.idVendor) != USB_M105_VENDOR_ID) ||
689 (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) {
690 gig_dbg(DEBUG_ANY, "device ID (0x%x, 0x%x) not for me - skip",
691 le16_to_cpu(udev->descriptor.idVendor),
692 le16_to_cpu(udev->descriptor.idProduct));
695 if (hostif->desc.bInterfaceNumber != 0) {
696 gig_dbg(DEBUG_ANY, "interface %d not for me - skip",
697 hostif->desc.bInterfaceNumber);
700 if (hostif->desc.bAlternateSetting != 0) {
701 dev_notice(&udev->dev, "unsupported altsetting %d - skip",
702 hostif->desc.bAlternateSetting);
705 if (hostif->desc.bInterfaceClass != 255) {
706 dev_notice(&udev->dev, "unsupported interface class %d - skip",
707 hostif->desc.bInterfaceClass);
711 dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
713 /* allocate memory for our device state and intialize it */
714 cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
719 /* save off device structure ptrs for later use */
722 ucs->interface = interface;
723 cs->dev = &interface->dev;
725 /* save address of controller structure */
726 usb_set_intfdata(interface, cs);
728 endpoint = &hostif->endpoint[0].desc;
730 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
731 ucs->bulk_out_size = buffer_size;
732 ucs->bulk_out_endpointAddr = endpoint->bEndpointAddress;
733 ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
734 if (!ucs->bulk_out_buffer) {
735 dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n");
740 ucs->bulk_out_urb = usb_alloc_urb(0, GFP_KERNEL);
741 if (!ucs->bulk_out_urb) {
742 dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n");
747 endpoint = &hostif->endpoint[1].desc;
751 ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
752 if (!ucs->read_urb) {
753 dev_err(cs->dev, "No free urbs available\n");
757 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
758 ucs->rcvbuf_size = buffer_size;
759 ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
760 ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
762 dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
766 /* Fill the interrupt urb and send it to the core */
767 usb_fill_int_urb(ucs->read_urb, udev,
769 endpoint->bEndpointAddress & 0x0f),
770 ucs->rcvbuf, buffer_size,
771 gigaset_read_int_callback,
772 cs, endpoint->bInterval);
774 retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
776 dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval);
780 /* tell common part that the device is ready */
781 if (startmode == SM_LOCKED)
782 cs->mstate = MS_LOCKED;
784 if (!gigaset_start(cs)) {
785 tasklet_kill(&cs->write_tasklet);
792 usb_kill_urb(ucs->read_urb);
793 kfree(ucs->bulk_out_buffer);
794 usb_free_urb(ucs->bulk_out_urb);
796 usb_free_urb(ucs->read_urb);
797 usb_set_intfdata(interface, NULL);
798 ucs->read_urb = ucs->bulk_out_urb = NULL;
799 ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
800 usb_put_dev(ucs->udev);
802 ucs->interface = NULL;
807 static void gigaset_disconnect(struct usb_interface *interface)
809 struct cardstate *cs;
810 struct usb_cardstate *ucs;
812 cs = usb_get_intfdata(interface);
815 dev_info(cs->dev, "disconnecting Gigaset USB adapter\n");
817 usb_kill_urb(ucs->read_urb);
821 usb_set_intfdata(interface, NULL);
822 tasklet_kill(&cs->write_tasklet);
824 usb_kill_urb(ucs->bulk_out_urb);
826 kfree(ucs->bulk_out_buffer);
827 usb_free_urb(ucs->bulk_out_urb);
829 usb_free_urb(ucs->read_urb);
830 ucs->read_urb = ucs->bulk_out_urb = NULL;
831 ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
833 usb_put_dev(ucs->udev);
834 ucs->interface = NULL;
841 * This function is called before the USB connection is suspended or reset.
843 static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
845 struct cardstate *cs = usb_get_intfdata(intf);
848 cs->connected = 0; /* prevent rescheduling */
849 usb_kill_urb(cs->hw.usb->read_urb);
850 tasklet_kill(&cs->write_tasklet);
851 usb_kill_urb(cs->hw.usb->bulk_out_urb);
853 gig_dbg(DEBUG_SUSPEND, "suspend complete");
858 * This function is called after the USB connection has been resumed or reset.
860 static int gigaset_resume(struct usb_interface *intf)
862 struct cardstate *cs = usb_get_intfdata(intf);
865 /* resubmit interrupt URB */
867 rc = usb_submit_urb(cs->hw.usb->read_urb, GFP_KERNEL);
869 dev_err(cs->dev, "Could not submit read URB (error %d)\n", -rc);
873 gig_dbg(DEBUG_SUSPEND, "resume complete");
878 * This function is called before the USB connection is reset.
880 static int gigaset_pre_reset(struct usb_interface *intf)
882 /* same as suspend */
883 return gigaset_suspend(intf, PMSG_ON);
886 static const struct gigaset_ops ops = {
889 gigaset_chars_in_buffer,
891 gigaset_init_bchannel,
892 gigaset_close_bchannel,
898 gigaset_set_modem_ctrl,
900 gigaset_set_line_ctrl,
901 gigaset_m10x_send_skb,
906 * This function is called while kernel-module is loaded
908 static int __init usb_gigaset_init(void)
912 /* allocate memory for our driver state and intialize it */
913 driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
914 GIGASET_MODULENAME, GIGASET_DEVNAME,
919 /* register this driver with the USB subsystem */
920 result = usb_register(&gigaset_usb_driver);
922 pr_err("error %d registering USB driver\n", -result);
926 pr_info(DRIVER_DESC "\n");
931 gigaset_freedriver(driver);
937 * This function is called while unloading the kernel-module
939 static void __exit usb_gigaset_exit(void)
943 gigaset_blockdriver(driver); /* => probe will fail
944 * => no gigaset_start any more
947 /* stop all connected devices */
948 for (i = 0; i < driver->minors; i++)
949 gigaset_shutdown(driver->cs + i);
951 /* from now on, no isdn callback should be possible */
953 /* deregister this driver with the USB subsystem */
954 usb_deregister(&gigaset_usb_driver);
955 /* this will call the disconnect-callback */
956 /* from now on, no disconnect/probe callback should be running */
958 gigaset_freedriver(driver);
963 module_init(usb_gigaset_init);
964 module_exit(usb_gigaset_exit);
966 MODULE_AUTHOR(DRIVER_AUTHOR);
967 MODULE_DESCRIPTION(DRIVER_DESC);
969 MODULE_LICENSE("GPL");