headers: remove sched.h from interrupt.h
[safe/jmp/linux-2.6] / drivers / input / serio / libps2.c
1 /*
2  * PS/2 driver library
3  *
4  * Copyright (c) 1999-2002 Vojtech Pavlik
5  * Copyright (c) 2004 Dmitry Torokhov
6  */
7
8 /*
9  * This program is free software; you can redistribute it and/or modify it
10  * under the terms of the GNU General Public License version 2 as published by
11  * the Free Software Foundation.
12  */
13
14 #include <linux/delay.h>
15 #include <linux/module.h>
16 #include <linux/sched.h>
17 #include <linux/slab.h>
18 #include <linux/interrupt.h>
19 #include <linux/input.h>
20 #include <linux/serio.h>
21 #include <linux/i8042.h>
22 #include <linux/init.h>
23 #include <linux/libps2.h>
24
25 #define DRIVER_DESC     "PS/2 driver library"
26
27 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
28 MODULE_DESCRIPTION("PS/2 driver library");
29 MODULE_LICENSE("GPL");
30
31 /*
32  * ps2_sendbyte() sends a byte to the device and waits for acknowledge.
33  * It doesn't handle retransmission, though it could - because if there
34  * is a need for retransmissions device has to be replaced anyway.
35  *
36  * ps2_sendbyte() can only be called from a process context.
37  */
38
39 int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout)
40 {
41         serio_pause_rx(ps2dev->serio);
42         ps2dev->nak = 1;
43         ps2dev->flags |= PS2_FLAG_ACK;
44         serio_continue_rx(ps2dev->serio);
45
46         if (serio_write(ps2dev->serio, byte) == 0)
47                 wait_event_timeout(ps2dev->wait,
48                                    !(ps2dev->flags & PS2_FLAG_ACK),
49                                    msecs_to_jiffies(timeout));
50
51         serio_pause_rx(ps2dev->serio);
52         ps2dev->flags &= ~PS2_FLAG_ACK;
53         serio_continue_rx(ps2dev->serio);
54
55         return -ps2dev->nak;
56 }
57 EXPORT_SYMBOL(ps2_sendbyte);
58
59 void ps2_begin_command(struct ps2dev *ps2dev)
60 {
61         mutex_lock(&ps2dev->cmd_mutex);
62
63         if (i8042_check_port_owner(ps2dev->serio))
64                 i8042_lock_chip();
65 }
66 EXPORT_SYMBOL(ps2_begin_command);
67
68 void ps2_end_command(struct ps2dev *ps2dev)
69 {
70         if (i8042_check_port_owner(ps2dev->serio))
71                 i8042_unlock_chip();
72
73         mutex_unlock(&ps2dev->cmd_mutex);
74 }
75 EXPORT_SYMBOL(ps2_end_command);
76
77 /*
78  * ps2_drain() waits for device to transmit requested number of bytes
79  * and discards them.
80  */
81
82 void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout)
83 {
84         if (maxbytes > sizeof(ps2dev->cmdbuf)) {
85                 WARN_ON(1);
86                 maxbytes = sizeof(ps2dev->cmdbuf);
87         }
88
89         ps2_begin_command(ps2dev);
90
91         serio_pause_rx(ps2dev->serio);
92         ps2dev->flags = PS2_FLAG_CMD;
93         ps2dev->cmdcnt = maxbytes;
94         serio_continue_rx(ps2dev->serio);
95
96         wait_event_timeout(ps2dev->wait,
97                            !(ps2dev->flags & PS2_FLAG_CMD),
98                            msecs_to_jiffies(timeout));
99
100         ps2_end_command(ps2dev);
101 }
102 EXPORT_SYMBOL(ps2_drain);
103
104 /*
105  * ps2_is_keyboard_id() checks received ID byte against the list of
106  * known keyboard IDs.
107  */
108
109 int ps2_is_keyboard_id(char id_byte)
110 {
111         static const char keyboard_ids[] = {
112                 0xab,   /* Regular keyboards            */
113                 0xac,   /* NCD Sun keyboard             */
114                 0x2b,   /* Trust keyboard, translated   */
115                 0x5d,   /* Trust keyboard               */
116                 0x60,   /* NMB SGI keyboard, translated */
117                 0x47,   /* NMB SGI keyboard             */
118         };
119
120         return memchr(keyboard_ids, id_byte, sizeof(keyboard_ids)) != NULL;
121 }
122 EXPORT_SYMBOL(ps2_is_keyboard_id);
123
124 /*
125  * ps2_adjust_timeout() is called after receiving 1st byte of command
126  * response and tries to reduce remaining timeout to speed up command
127  * completion.
128  */
129
130 static int ps2_adjust_timeout(struct ps2dev *ps2dev, int command, int timeout)
131 {
132         switch (command) {
133                 case PS2_CMD_RESET_BAT:
134                         /*
135                          * Device has sent the first response byte after
136                          * reset command, reset is thus done, so we can
137                          * shorten the timeout.
138                          * The next byte will come soon (keyboard) or not
139                          * at all (mouse).
140                          */
141                         if (timeout > msecs_to_jiffies(100))
142                                 timeout = msecs_to_jiffies(100);
143                         break;
144
145                 case PS2_CMD_GETID:
146                         /*
147                          * Microsoft Natural Elite keyboard responds to
148                          * the GET ID command as it were a mouse, with
149                          * a single byte. Fail the command so atkbd will
150                          * use alternative probe to detect it.
151                          */
152                         if (ps2dev->cmdbuf[1] == 0xaa) {
153                                 serio_pause_rx(ps2dev->serio);
154                                 ps2dev->flags = 0;
155                                 serio_continue_rx(ps2dev->serio);
156                                 timeout = 0;
157                         }
158
159                         /*
160                          * If device behind the port is not a keyboard there
161                          * won't be 2nd byte of ID response.
162                          */
163                         if (!ps2_is_keyboard_id(ps2dev->cmdbuf[1])) {
164                                 serio_pause_rx(ps2dev->serio);
165                                 ps2dev->flags = ps2dev->cmdcnt = 0;
166                                 serio_continue_rx(ps2dev->serio);
167                                 timeout = 0;
168                         }
169                         break;
170
171                 default:
172                         break;
173         }
174
175         return timeout;
176 }
177
178 /*
179  * ps2_command() sends a command and its parameters to the mouse,
180  * then waits for the response and puts it in the param array.
181  *
182  * ps2_command() can only be called from a process context
183  */
184
185 int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
186 {
187         int timeout;
188         int send = (command >> 12) & 0xf;
189         int receive = (command >> 8) & 0xf;
190         int rc = -1;
191         int i;
192
193         if (receive > sizeof(ps2dev->cmdbuf)) {
194                 WARN_ON(1);
195                 return -1;
196         }
197
198         if (send && !param) {
199                 WARN_ON(1);
200                 return -1;
201         }
202
203         serio_pause_rx(ps2dev->serio);
204         ps2dev->flags = command == PS2_CMD_GETID ? PS2_FLAG_WAITID : 0;
205         ps2dev->cmdcnt = receive;
206         if (receive && param)
207                 for (i = 0; i < receive; i++)
208                         ps2dev->cmdbuf[(receive - 1) - i] = param[i];
209         serio_continue_rx(ps2dev->serio);
210
211         /*
212          * Some devices (Synaptics) peform the reset before
213          * ACKing the reset command, and so it can take a long
214          * time before the ACK arrrives.
215          */
216         if (ps2_sendbyte(ps2dev, command & 0xff,
217                          command == PS2_CMD_RESET_BAT ? 1000 : 200))
218                 goto out;
219
220         for (i = 0; i < send; i++)
221                 if (ps2_sendbyte(ps2dev, param[i], 200))
222                         goto out;
223
224         /*
225          * The reset command takes a long time to execute.
226          */
227         timeout = msecs_to_jiffies(command == PS2_CMD_RESET_BAT ? 4000 : 500);
228
229         timeout = wait_event_timeout(ps2dev->wait,
230                                      !(ps2dev->flags & PS2_FLAG_CMD1), timeout);
231
232         if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
233
234                 timeout = ps2_adjust_timeout(ps2dev, command, timeout);
235                 wait_event_timeout(ps2dev->wait,
236                                    !(ps2dev->flags & PS2_FLAG_CMD), timeout);
237         }
238
239         if (param)
240                 for (i = 0; i < receive; i++)
241                         param[i] = ps2dev->cmdbuf[(receive - 1) - i];
242
243         if (ps2dev->cmdcnt && (command != PS2_CMD_RESET_BAT || ps2dev->cmdcnt != 1))
244                 goto out;
245
246         rc = 0;
247
248  out:
249         serio_pause_rx(ps2dev->serio);
250         ps2dev->flags = 0;
251         serio_continue_rx(ps2dev->serio);
252
253         return rc;
254 }
255 EXPORT_SYMBOL(__ps2_command);
256
257 int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
258 {
259         int rc;
260
261         ps2_begin_command(ps2dev);
262         rc = __ps2_command(ps2dev, param, command);
263         ps2_end_command(ps2dev);
264
265         return rc;
266 }
267 EXPORT_SYMBOL(ps2_command);
268
269 /*
270  * ps2_init() initializes ps2dev structure
271  */
272
273 void ps2_init(struct ps2dev *ps2dev, struct serio *serio)
274 {
275         mutex_init(&ps2dev->cmd_mutex);
276         lockdep_set_subclass(&ps2dev->cmd_mutex, serio->depth);
277         init_waitqueue_head(&ps2dev->wait);
278         ps2dev->serio = serio;
279 }
280 EXPORT_SYMBOL(ps2_init);
281
282 /*
283  * ps2_handle_ack() is supposed to be used in interrupt handler
284  * to properly process ACK/NAK of a command from a PS/2 device.
285  */
286
287 int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data)
288 {
289         switch (data) {
290                 case PS2_RET_ACK:
291                         ps2dev->nak = 0;
292                         break;
293
294                 case PS2_RET_NAK:
295                         ps2dev->flags |= PS2_FLAG_NAK;
296                         ps2dev->nak = PS2_RET_NAK;
297                         break;
298
299                 case PS2_RET_ERR:
300                         if (ps2dev->flags & PS2_FLAG_NAK) {
301                                 ps2dev->flags &= ~PS2_FLAG_NAK;
302                                 ps2dev->nak = PS2_RET_ERR;
303                                 break;
304                         }
305
306                 /*
307                  * Workaround for mice which don't ACK the Get ID command.
308                  * These are valid mouse IDs that we recognize.
309                  */
310                 case 0x00:
311                 case 0x03:
312                 case 0x04:
313                         if (ps2dev->flags & PS2_FLAG_WAITID) {
314                                 ps2dev->nak = 0;
315                                 break;
316                         }
317                         /* Fall through */
318                 default:
319                         return 0;
320         }
321
322
323         if (!ps2dev->nak) {
324                 ps2dev->flags &= ~PS2_FLAG_NAK;
325                 if (ps2dev->cmdcnt)
326                         ps2dev->flags |= PS2_FLAG_CMD | PS2_FLAG_CMD1;
327         }
328
329         ps2dev->flags &= ~PS2_FLAG_ACK;
330         wake_up(&ps2dev->wait);
331
332         if (data != PS2_RET_ACK)
333                 ps2_handle_response(ps2dev, data);
334
335         return 1;
336 }
337 EXPORT_SYMBOL(ps2_handle_ack);
338
339 /*
340  * ps2_handle_response() is supposed to be used in interrupt handler
341  * to properly store device's response to a command and notify process
342  * waiting for completion of the command.
343  */
344
345 int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data)
346 {
347         if (ps2dev->cmdcnt)
348                 ps2dev->cmdbuf[--ps2dev->cmdcnt] = data;
349
350         if (ps2dev->flags & PS2_FLAG_CMD1) {
351                 ps2dev->flags &= ~PS2_FLAG_CMD1;
352                 if (ps2dev->cmdcnt)
353                         wake_up(&ps2dev->wait);
354         }
355
356         if (!ps2dev->cmdcnt) {
357                 ps2dev->flags &= ~PS2_FLAG_CMD;
358                 wake_up(&ps2dev->wait);
359         }
360
361         return 1;
362 }
363 EXPORT_SYMBOL(ps2_handle_response);
364
365 void ps2_cmd_aborted(struct ps2dev *ps2dev)
366 {
367         if (ps2dev->flags & PS2_FLAG_ACK)
368                 ps2dev->nak = 1;
369
370         if (ps2dev->flags & (PS2_FLAG_ACK | PS2_FLAG_CMD))
371                 wake_up(&ps2dev->wait);
372
373         /* reset all flags except last nack */
374         ps2dev->flags &= PS2_FLAG_NAK;
375 }
376 EXPORT_SYMBOL(ps2_cmd_aborted);