IB: convert struct class_device to struct device
[safe/jmp/linux-2.6] / drivers / infiniband / hw / ipath / ipath_kernel.h
1 #ifndef _IPATH_KERNEL_H
2 #define _IPATH_KERNEL_H
3 /*
4  * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
5  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
6  *
7  * This software is available to you under a choice of one of two
8  * licenses.  You may choose to be licensed under the terms of the GNU
9  * General Public License (GPL) Version 2, available from the file
10  * COPYING in the main directory of this source tree, or the
11  * OpenIB.org BSD license below:
12  *
13  *     Redistribution and use in source and binary forms, with or
14  *     without modification, are permitted provided that the following
15  *     conditions are met:
16  *
17  *      - Redistributions of source code must retain the above
18  *        copyright notice, this list of conditions and the following
19  *        disclaimer.
20  *
21  *      - Redistributions in binary form must reproduce the above
22  *        copyright notice, this list of conditions and the following
23  *        disclaimer in the documentation and/or other materials
24  *        provided with the distribution.
25  *
26  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
27  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
28  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
29  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
30  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
31  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
32  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
33  * SOFTWARE.
34  */
35
36 /*
37  * This header file is the base header file for infinipath kernel code
38  * ipath_user.h serves a similar purpose for user code.
39  */
40
41 #include <linux/interrupt.h>
42 #include <linux/pci.h>
43 #include <linux/dma-mapping.h>
44 #include <linux/mutex.h>
45 #include <linux/list.h>
46 #include <linux/scatterlist.h>
47 #include <asm/io.h>
48 #include <rdma/ib_verbs.h>
49
50 #include "ipath_common.h"
51 #include "ipath_debug.h"
52 #include "ipath_registers.h"
53
54 /* only s/w major version of InfiniPath we can handle */
55 #define IPATH_CHIP_VERS_MAJ 2U
56
57 /* don't care about this except printing */
58 #define IPATH_CHIP_VERS_MIN 0U
59
60 /* temporary, maybe always */
61 extern struct infinipath_stats ipath_stats;
62
63 #define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
64 /*
65  * First-cut critierion for "device is active" is
66  * two thousand dwords combined Tx, Rx traffic per
67  * 5-second interval. SMA packets are 64 dwords,
68  * and occur "a few per second", presumably each way.
69  */
70 #define IPATH_TRAFFIC_ACTIVE_THRESHOLD (2000)
71 /*
72  * Struct used to indicate which errors are logged in each of the
73  * error-counters that are logged to EEPROM. A counter is incremented
74  * _once_ (saturating at 255) for each event with any bits set in
75  * the error or hwerror register masks below.
76  */
77 #define IPATH_EEP_LOG_CNT (4)
78 struct ipath_eep_log_mask {
79         u64 errs_to_log;
80         u64 hwerrs_to_log;
81 };
82
83 struct ipath_portdata {
84         void **port_rcvegrbuf;
85         dma_addr_t *port_rcvegrbuf_phys;
86         /* rcvhdrq base, needs mmap before useful */
87         void *port_rcvhdrq;
88         /* kernel virtual address where hdrqtail is updated */
89         void *port_rcvhdrtail_kvaddr;
90         /*
91          * temp buffer for expected send setup, allocated at open, instead
92          * of each setup call
93          */
94         void *port_tid_pg_list;
95         /* when waiting for rcv or pioavail */
96         wait_queue_head_t port_wait;
97         /*
98          * rcvegr bufs base, physical, must fit
99          * in 44 bits so 32 bit programs mmap64 44 bit works)
100          */
101         dma_addr_t port_rcvegr_phys;
102         /* mmap of hdrq, must fit in 44 bits */
103         dma_addr_t port_rcvhdrq_phys;
104         dma_addr_t port_rcvhdrqtailaddr_phys;
105         /*
106          * number of opens (including slave subports) on this instance
107          * (ignoring forks, dup, etc. for now)
108          */
109         int port_cnt;
110         /*
111          * how much space to leave at start of eager TID entries for
112          * protocol use, on each TID
113          */
114         /* instead of calculating it */
115         unsigned port_port;
116         /* non-zero if port is being shared. */
117         u16 port_subport_cnt;
118         /* non-zero if port is being shared. */
119         u16 port_subport_id;
120         /* chip offset of PIO buffers for this port */
121         u32 port_piobufs;
122         /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
123         u32 port_rcvegrbuf_chunks;
124         /* how many egrbufs per chunk */
125         u32 port_rcvegrbufs_perchunk;
126         /* order for port_rcvegrbuf_pages */
127         size_t port_rcvegrbuf_size;
128         /* rcvhdrq size (for freeing) */
129         size_t port_rcvhdrq_size;
130         /* next expected TID to check when looking for free */
131         u32 port_tidcursor;
132         /* next expected TID to check */
133         unsigned long port_flag;
134         /* what happened */
135         unsigned long int_flag;
136         /* WAIT_RCV that timed out, no interrupt */
137         u32 port_rcvwait_to;
138         /* WAIT_PIO that timed out, no interrupt */
139         u32 port_piowait_to;
140         /* WAIT_RCV already happened, no wait */
141         u32 port_rcvnowait;
142         /* WAIT_PIO already happened, no wait */
143         u32 port_pionowait;
144         /* total number of rcvhdrqfull errors */
145         u32 port_hdrqfull;
146         /*
147          * Used to suppress multiple instances of same
148          * port staying stuck at same point.
149          */
150         u32 port_lastrcvhdrqtail;
151         /* saved total number of rcvhdrqfull errors for poll edge trigger */
152         u32 port_hdrqfull_poll;
153         /* total number of polled urgent packets */
154         u32 port_urgent;
155         /* saved total number of polled urgent packets for poll edge trigger */
156         u32 port_urgent_poll;
157         /* pid of process using this port */
158         pid_t port_pid;
159         pid_t port_subpid[INFINIPATH_MAX_SUBPORT];
160         /* same size as task_struct .comm[] */
161         char port_comm[16];
162         /* pkeys set by this use of this port */
163         u16 port_pkeys[4];
164         /* so file ops can get at unit */
165         struct ipath_devdata *port_dd;
166         /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
167         void *subport_uregbase;
168         /* An array of pages for the eager receive buffers * N */
169         void *subport_rcvegrbuf;
170         /* An array of pages for the eager header queue entries * N */
171         void *subport_rcvhdr_base;
172         /* The version of the library which opened this port */
173         u32 userversion;
174         /* Bitmask of active slaves */
175         u32 active_slaves;
176         /* Type of packets or conditions we want to poll for */
177         u16 poll_type;
178         /* port rcvhdrq head offset */
179         u32 port_head;
180         /* receive packet sequence counter */
181         u32 port_seq_cnt;
182 };
183
184 struct sk_buff;
185 struct ipath_sge_state;
186 struct ipath_verbs_txreq;
187
188 /*
189  * control information for layered drivers
190  */
191 struct _ipath_layer {
192         void *l_arg;
193 };
194
195 struct ipath_skbinfo {
196         struct sk_buff *skb;
197         dma_addr_t phys;
198 };
199
200 struct ipath_sdma_txreq {
201         int                 flags;
202         int                 sg_count;
203         union {
204                 struct scatterlist *sg;
205                 void *map_addr;
206         };
207         void              (*callback)(void *, int);
208         void               *callback_cookie;
209         int                 callback_status;
210         u16                 start_idx;  /* sdma private */
211         u16                 next_descq_idx;  /* sdma private */
212         struct list_head    list;       /* sdma private */
213 };
214
215 struct ipath_sdma_desc {
216         __le64 qw[2];
217 };
218
219 #define IPATH_SDMA_TXREQ_F_USELARGEBUF  0x1
220 #define IPATH_SDMA_TXREQ_F_HEADTOHOST   0x2
221 #define IPATH_SDMA_TXREQ_F_INTREQ       0x4
222 #define IPATH_SDMA_TXREQ_F_FREEBUF      0x8
223 #define IPATH_SDMA_TXREQ_F_FREEDESC     0x10
224 #define IPATH_SDMA_TXREQ_F_VL15         0x20
225
226 #define IPATH_SDMA_TXREQ_S_OK        0
227 #define IPATH_SDMA_TXREQ_S_SENDERROR 1
228 #define IPATH_SDMA_TXREQ_S_ABORTED   2
229 #define IPATH_SDMA_TXREQ_S_SHUTDOWN  3
230
231 /* max dwords in small buffer packet */
232 #define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
233
234 /*
235  * Possible IB config parameters for ipath_f_get/set_ib_cfg()
236  */
237 #define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */
238 #define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */
239 #define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */
240 #define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */
241 #define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */
242 #define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */
243 #define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */
244 #define IPATH_IB_CFG_SPD 5 /* Get current Link spd */
245 #define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */
246 #define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */
247 #define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */
248
249
250 struct ipath_devdata {
251         struct list_head ipath_list;
252
253         struct ipath_kregs const *ipath_kregs;
254         struct ipath_cregs const *ipath_cregs;
255
256         /* mem-mapped pointer to base of chip regs */
257         u64 __iomem *ipath_kregbase;
258         /* end of mem-mapped chip space; range checking */
259         u64 __iomem *ipath_kregend;
260         /* physical address of chip for io_remap, etc. */
261         unsigned long ipath_physaddr;
262         /* base of memory alloced for ipath_kregbase, for free */
263         u64 *ipath_kregalloc;
264         /* ipath_cfgports pointers */
265         struct ipath_portdata **ipath_pd;
266         /* sk_buffs used by port 0 eager receive queue */
267         struct ipath_skbinfo *ipath_port0_skbinfo;
268         /* kvirt address of 1st 2k pio buffer */
269         void __iomem *ipath_pio2kbase;
270         /* kvirt address of 1st 4k pio buffer */
271         void __iomem *ipath_pio4kbase;
272         /*
273          * points to area where PIOavail registers will be DMA'ed.
274          * Has to be on a page of it's own, because the page will be
275          * mapped into user program space.  This copy is *ONLY* ever
276          * written by DMA, not by the driver!  Need a copy per device
277          * when we get to multiple devices
278          */
279         volatile __le64 *ipath_pioavailregs_dma;
280         /* physical address where updates occur */
281         dma_addr_t ipath_pioavailregs_phys;
282         struct _ipath_layer ipath_layer;
283         /* setup intr */
284         int (*ipath_f_intrsetup)(struct ipath_devdata *);
285         /* fallback to alternate interrupt type if possible */
286         int (*ipath_f_intr_fallback)(struct ipath_devdata *);
287         /* setup on-chip bus config */
288         int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
289         /* hard reset chip */
290         int (*ipath_f_reset)(struct ipath_devdata *);
291         int (*ipath_f_get_boardname)(struct ipath_devdata *, char *,
292                                      size_t);
293         void (*ipath_f_init_hwerrors)(struct ipath_devdata *);
294         void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *,
295                                         size_t);
296         void (*ipath_f_quiet_serdes)(struct ipath_devdata *);
297         int (*ipath_f_bringup_serdes)(struct ipath_devdata *);
298         int (*ipath_f_early_init)(struct ipath_devdata *);
299         void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned);
300         void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*,
301                                 u32, unsigned long);
302         void (*ipath_f_tidtemplate)(struct ipath_devdata *);
303         void (*ipath_f_cleanup)(struct ipath_devdata *);
304         void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
305         /* fill out chip-specific fields */
306         int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
307         /* free irq */
308         void (*ipath_f_free_irq)(struct ipath_devdata *);
309         struct ipath_message_header *(*ipath_f_get_msgheader)
310                                         (struct ipath_devdata *, __le32 *);
311         void (*ipath_f_config_ports)(struct ipath_devdata *, ushort);
312         int (*ipath_f_get_ib_cfg)(struct ipath_devdata *, int);
313         int (*ipath_f_set_ib_cfg)(struct ipath_devdata *, int, u32);
314         void (*ipath_f_config_jint)(struct ipath_devdata *, u16 , u16);
315         void (*ipath_f_read_counters)(struct ipath_devdata *,
316                                         struct infinipath_counters *);
317         void (*ipath_f_xgxs_reset)(struct ipath_devdata *);
318         /* per chip actions needed for IB Link up/down changes */
319         int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
320
321         unsigned ipath_lastegr_idx;
322         struct ipath_ibdev *verbs_dev;
323         struct timer_list verbs_timer;
324         /* total dwords sent (summed from counter) */
325         u64 ipath_sword;
326         /* total dwords rcvd (summed from counter) */
327         u64 ipath_rword;
328         /* total packets sent (summed from counter) */
329         u64 ipath_spkts;
330         /* total packets rcvd (summed from counter) */
331         u64 ipath_rpkts;
332         /* ipath_statusp initially points to this. */
333         u64 _ipath_status;
334         /* GUID for this interface, in network order */
335         __be64 ipath_guid;
336         /*
337          * aggregrate of error bits reported since last cleared, for
338          * limiting of error reporting
339          */
340         ipath_err_t ipath_lasterror;
341         /*
342          * aggregrate of error bits reported since last cleared, for
343          * limiting of hwerror reporting
344          */
345         ipath_err_t ipath_lasthwerror;
346         /* errors masked because they occur too fast */
347         ipath_err_t ipath_maskederrs;
348         u64 ipath_lastlinkrecov; /* link recoveries at last ACTIVE */
349         /* time in jiffies at which to re-enable maskederrs */
350         unsigned long ipath_unmasktime;
351         /* count of egrfull errors, combined for all ports */
352         u64 ipath_last_tidfull;
353         /* for ipath_qcheck() */
354         u64 ipath_lastport0rcv_cnt;
355         /* template for writing TIDs  */
356         u64 ipath_tidtemplate;
357         /* value to write to free TIDs */
358         u64 ipath_tidinvalid;
359         /* IBA6120 rcv interrupt setup */
360         u64 ipath_rhdrhead_intr_off;
361
362         /* size of memory at ipath_kregbase */
363         u32 ipath_kregsize;
364         /* number of registers used for pioavail */
365         u32 ipath_pioavregs;
366         /* IPATH_POLL, etc. */
367         u32 ipath_flags;
368         /* ipath_flags driver is waiting for */
369         u32 ipath_state_wanted;
370         /* last buffer for user use, first buf for kernel use is this
371          * index. */
372         u32 ipath_lastport_piobuf;
373         /* is a stats timer active */
374         u32 ipath_stats_timer_active;
375         /* number of interrupts for this device -- saturates... */
376         u32 ipath_int_counter;
377         /* dwords sent read from counter */
378         u32 ipath_lastsword;
379         /* dwords received read from counter */
380         u32 ipath_lastrword;
381         /* sent packets read from counter */
382         u32 ipath_lastspkts;
383         /* received packets read from counter */
384         u32 ipath_lastrpkts;
385         /* pio bufs allocated per port */
386         u32 ipath_pbufsport;
387         u32 ipath_pioupd_thresh; /* update threshold, some chips */
388         /*
389          * number of ports configured as max; zero is set to number chip
390          * supports, less gives more pio bufs/port, etc.
391          */
392         u32 ipath_cfgports;
393         /* count of port 0 hdrqfull errors */
394         u32 ipath_p0_hdrqfull;
395         /* port 0 number of receive eager buffers */
396         u32 ipath_p0_rcvegrcnt;
397
398         /*
399          * index of last piobuffer we used.  Speeds up searching, by
400          * starting at this point.  Doesn't matter if multiple cpu's use and
401          * update, last updater is only write that matters.  Whenever it
402          * wraps, we update shadow copies.  Need a copy per device when we
403          * get to multiple devices
404          */
405         u32 ipath_lastpioindex;
406         u32 ipath_lastpioindexl;
407         /* max length of freezemsg */
408         u32 ipath_freezelen;
409         /*
410          * consecutive times we wanted a PIO buffer but were unable to
411          * get one
412          */
413         u32 ipath_consec_nopiobuf;
414         /*
415          * hint that we should update ipath_pioavailshadow before
416          * looking for a PIO buffer
417          */
418         u32 ipath_upd_pio_shadow;
419         /* so we can rewrite it after a chip reset */
420         u32 ipath_pcibar0;
421         /* so we can rewrite it after a chip reset */
422         u32 ipath_pcibar1;
423         u32 ipath_x1_fix_tries;
424         u32 ipath_autoneg_tries;
425         u32 serdes_first_init_done;
426
427         struct ipath_relock {
428                 atomic_t ipath_relock_timer_active;
429                 struct timer_list ipath_relock_timer;
430                 unsigned int ipath_relock_interval; /* in jiffies */
431         } ipath_relock_singleton;
432
433         /* interrupt number */
434         int ipath_irq;
435         /* HT/PCI Vendor ID (here for NodeInfo) */
436         u16 ipath_vendorid;
437         /* HT/PCI Device ID (here for NodeInfo) */
438         u16 ipath_deviceid;
439         /* offset in HT config space of slave/primary interface block */
440         u8 ipath_ht_slave_off;
441         /* for write combining settings */
442         unsigned long ipath_wc_cookie;
443         unsigned long ipath_wc_base;
444         unsigned long ipath_wc_len;
445         /* ref count for each pkey */
446         atomic_t ipath_pkeyrefs[4];
447         /* shadow copy of struct page *'s for exp tid pages */
448         struct page **ipath_pageshadow;
449         /* shadow copy of dma handles for exp tid pages */
450         dma_addr_t *ipath_physshadow;
451         u64 __iomem *ipath_egrtidbase;
452         /* lock to workaround chip bug 9437 and others */
453         spinlock_t ipath_kernel_tid_lock;
454         spinlock_t ipath_user_tid_lock;
455         spinlock_t ipath_sendctrl_lock;
456
457         /*
458          * IPATH_STATUS_*,
459          * this address is mapped readonly into user processes so they can
460          * get status cheaply, whenever they want.
461          */
462         u64 *ipath_statusp;
463         /* freeze msg if hw error put chip in freeze */
464         char *ipath_freezemsg;
465         /* pci access data structure */
466         struct pci_dev *pcidev;
467         struct cdev *user_cdev;
468         struct cdev *diag_cdev;
469         struct device *user_dev;
470         struct device *diag_dev;
471         /* timer used to prevent stats overflow, error throttling, etc. */
472         struct timer_list ipath_stats_timer;
473         /* timer to verify interrupts work, and fallback if possible */
474         struct timer_list ipath_intrchk_timer;
475         void *ipath_dummy_hdrq; /* used after port close */
476         dma_addr_t ipath_dummy_hdrq_phys;
477
478         /* SendDMA related entries */
479         spinlock_t            ipath_sdma_lock;
480         u64                   ipath_sdma_status;
481         unsigned long         ipath_sdma_abort_jiffies;
482         unsigned long         ipath_sdma_abort_intr_timeout;
483         unsigned long         ipath_sdma_buf_jiffies;
484         struct ipath_sdma_desc *ipath_sdma_descq;
485         u64                   ipath_sdma_descq_added;
486         u64                   ipath_sdma_descq_removed;
487         int                   ipath_sdma_desc_nreserved;
488         u16                   ipath_sdma_descq_cnt;
489         u16                   ipath_sdma_descq_tail;
490         u16                   ipath_sdma_descq_head;
491         u16                   ipath_sdma_next_intr;
492         u16                   ipath_sdma_reset_wait;
493         u8                    ipath_sdma_generation;
494         struct tasklet_struct ipath_sdma_abort_task;
495         struct tasklet_struct ipath_sdma_notify_task;
496         struct list_head      ipath_sdma_activelist;
497         struct list_head      ipath_sdma_notifylist;
498         atomic_t              ipath_sdma_vl15_count;
499         struct timer_list     ipath_sdma_vl15_timer;
500
501         dma_addr_t       ipath_sdma_descq_phys;
502         volatile __le64 *ipath_sdma_head_dma;
503         dma_addr_t       ipath_sdma_head_phys;
504
505         unsigned long ipath_ureg_align; /* user register alignment */
506
507         struct delayed_work ipath_autoneg_work;
508         wait_queue_head_t ipath_autoneg_wait;
509
510         /* HoL blocking / user app forward-progress state */
511         unsigned          ipath_hol_state;
512         unsigned          ipath_hol_next;
513         struct timer_list ipath_hol_timer;
514
515         /*
516          * Shadow copies of registers; size indicates read access size.
517          * Most of them are readonly, but some are write-only register,
518          * where we manipulate the bits in the shadow copy, and then write
519          * the shadow copy to infinipath.
520          *
521          * We deliberately make most of these 32 bits, since they have
522          * restricted range.  For any that we read, we won't to generate 32
523          * bit accesses, since Opteron will generate 2 separate 32 bit HT
524          * transactions for a 64 bit read, and we want to avoid unnecessary
525          * HT transactions.
526          */
527
528         /* This is the 64 bit group */
529
530         /*
531          * shadow of pioavail, check to be sure it's large enough at
532          * init time.
533          */
534         unsigned long ipath_pioavailshadow[8];
535         /* bitmap of send buffers available for the kernel to use with PIO. */
536         unsigned long ipath_pioavailkernel[8];
537         /* shadow of kr_gpio_out, for rmw ops */
538         u64 ipath_gpio_out;
539         /* shadow the gpio mask register */
540         u64 ipath_gpio_mask;
541         /* shadow the gpio output enable, etc... */
542         u64 ipath_extctrl;
543         /* kr_revision shadow */
544         u64 ipath_revision;
545         /*
546          * shadow of ibcctrl, for interrupt handling of link changes,
547          * etc.
548          */
549         u64 ipath_ibcctrl;
550         /*
551          * last ibcstatus, to suppress "duplicate" status change messages,
552          * mostly from 2 to 3
553          */
554         u64 ipath_lastibcstat;
555         /* hwerrmask shadow */
556         ipath_err_t ipath_hwerrmask;
557         ipath_err_t ipath_errormask; /* errormask shadow */
558         /* interrupt config reg shadow */
559         u64 ipath_intconfig;
560         /* kr_sendpiobufbase value */
561         u64 ipath_piobufbase;
562         /* kr_ibcddrctrl shadow */
563         u64 ipath_ibcddrctrl;
564
565         /* these are the "32 bit" regs */
566
567         /*
568          * number of GUIDs in the flash for this interface; may need some
569          * rethinking for setting on other ifaces
570          */
571         u32 ipath_nguid;
572         /*
573          * the following two are 32-bit bitmasks, but {test,clear,set}_bit
574          * all expect bit fields to be "unsigned long"
575          */
576         /* shadow kr_rcvctrl */
577         unsigned long ipath_rcvctrl;
578         /* shadow kr_sendctrl */
579         unsigned long ipath_sendctrl;
580         /* to not count armlaunch after cancel */
581         unsigned long ipath_lastcancel;
582         /* count cases where special trigger was needed (double write) */
583         unsigned long ipath_spectriggerhit;
584
585         /* value we put in kr_rcvhdrcnt */
586         u32 ipath_rcvhdrcnt;
587         /* value we put in kr_rcvhdrsize */
588         u32 ipath_rcvhdrsize;
589         /* value we put in kr_rcvhdrentsize */
590         u32 ipath_rcvhdrentsize;
591         /* offset of last entry in rcvhdrq */
592         u32 ipath_hdrqlast;
593         /* kr_portcnt value */
594         u32 ipath_portcnt;
595         /* kr_pagealign value */
596         u32 ipath_palign;
597         /* number of "2KB" PIO buffers */
598         u32 ipath_piobcnt2k;
599         /* size in bytes of "2KB" PIO buffers */
600         u32 ipath_piosize2k;
601         /* number of "4KB" PIO buffers */
602         u32 ipath_piobcnt4k;
603         /* size in bytes of "4KB" PIO buffers */
604         u32 ipath_piosize4k;
605         u32 ipath_pioreserved; /* reserved special-inkernel; */
606         /* kr_rcvegrbase value */
607         u32 ipath_rcvegrbase;
608         /* kr_rcvegrcnt value */
609         u32 ipath_rcvegrcnt;
610         /* kr_rcvtidbase value */
611         u32 ipath_rcvtidbase;
612         /* kr_rcvtidcnt value */
613         u32 ipath_rcvtidcnt;
614         /* kr_sendregbase */
615         u32 ipath_sregbase;
616         /* kr_userregbase */
617         u32 ipath_uregbase;
618         /* kr_counterregbase */
619         u32 ipath_cregbase;
620         /* shadow the control register contents */
621         u32 ipath_control;
622         /* PCI revision register (HTC rev on FPGA) */
623         u32 ipath_pcirev;
624
625         /* chip address space used by 4k pio buffers */
626         u32 ipath_4kalign;
627         /* The MTU programmed for this unit */
628         u32 ipath_ibmtu;
629         /*
630          * The max size IB packet, included IB headers that we can send.
631          * Starts same as ipath_piosize, but is affected when ibmtu is
632          * changed, or by size of eager buffers
633          */
634         u32 ipath_ibmaxlen;
635         /*
636          * ibmaxlen at init time, limited by chip and by receive buffer
637          * size.  Not changed after init.
638          */
639         u32 ipath_init_ibmaxlen;
640         /* size of each rcvegrbuffer */
641         u32 ipath_rcvegrbufsize;
642         /* localbus width (1, 2,4,8,16,32) from config space  */
643         u32 ipath_lbus_width;
644         /* localbus speed (HT: 200,400,800,1000; PCIe 2500) */
645         u32 ipath_lbus_speed;
646         /*
647          * number of sequential ibcstatus change for polling active/quiet
648          * (i.e., link not coming up).
649          */
650         u32 ipath_ibpollcnt;
651         /* low and high portions of MSI capability/vector */
652         u32 ipath_msi_lo;
653         /* saved after PCIe init for restore after reset */
654         u32 ipath_msi_hi;
655         /* MSI data (vector) saved for restore */
656         u16 ipath_msi_data;
657         /* MLID programmed for this instance */
658         u16 ipath_mlid;
659         /* LID programmed for this instance */
660         u16 ipath_lid;
661         /* list of pkeys programmed; 0 if not set */
662         u16 ipath_pkeys[4];
663         /*
664          * ASCII serial number, from flash, large enough for original
665          * all digit strings, and longer QLogic serial number format
666          */
667         u8 ipath_serial[16];
668         /* human readable board version */
669         u8 ipath_boardversion[96];
670         u8 ipath_lbus_info[32]; /* human readable localbus info */
671         /* chip major rev, from ipath_revision */
672         u8 ipath_majrev;
673         /* chip minor rev, from ipath_revision */
674         u8 ipath_minrev;
675         /* board rev, from ipath_revision */
676         u8 ipath_boardrev;
677         /* saved for restore after reset */
678         u8 ipath_pci_cacheline;
679         /* LID mask control */
680         u8 ipath_lmc;
681         /* link width supported */
682         u8 ipath_link_width_supported;
683         /* link speed supported */
684         u8 ipath_link_speed_supported;
685         u8 ipath_link_width_enabled;
686         u8 ipath_link_speed_enabled;
687         u8 ipath_link_width_active;
688         u8 ipath_link_speed_active;
689         /* Rx Polarity inversion (compensate for ~tx on partner) */
690         u8 ipath_rx_pol_inv;
691
692         u8 ipath_r_portenable_shift;
693         u8 ipath_r_intravail_shift;
694         u8 ipath_r_tailupd_shift;
695         u8 ipath_r_portcfg_shift;
696
697         /* unit # of this chip, if present */
698         int ipath_unit;
699
700         /* local link integrity counter */
701         u32 ipath_lli_counter;
702         /* local link integrity errors */
703         u32 ipath_lli_errors;
704         /*
705          * Above counts only cases where _successive_ LocalLinkIntegrity
706          * errors were seen in the receive headers of kern-packets.
707          * Below are the three (monotonically increasing) counters
708          * maintained via GPIO interrupts on iba6120-rev2.
709          */
710         u32 ipath_rxfc_unsupvl_errs;
711         u32 ipath_overrun_thresh_errs;
712         u32 ipath_lli_errs;
713
714         /*
715          * Not all devices managed by a driver instance are the same
716          * type, so these fields must be per-device.
717          */
718         u64 ipath_i_bitsextant;
719         ipath_err_t ipath_e_bitsextant;
720         ipath_err_t ipath_hwe_bitsextant;
721
722         /*
723          * Below should be computable from number of ports,
724          * since they are never modified.
725          */
726         u64 ipath_i_rcvavail_mask;
727         u64 ipath_i_rcvurg_mask;
728         u16 ipath_i_rcvurg_shift;
729         u16 ipath_i_rcvavail_shift;
730
731         /*
732          * Register bits for selecting i2c direction and values, used for
733          * I2C serial flash.
734          */
735         u8 ipath_gpio_sda_num;
736         u8 ipath_gpio_scl_num;
737         u8 ipath_i2c_chain_type;
738         u64 ipath_gpio_sda;
739         u64 ipath_gpio_scl;
740
741         /* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */
742         spinlock_t ipath_gpio_lock;
743
744         /*
745          * IB link and linktraining states and masks that vary per chip in
746          * some way.  Set at init, to avoid each IB status change interrupt
747          */
748         u8 ibcs_ls_shift;
749         u8 ibcs_lts_mask;
750         u32 ibcs_mask;
751         u32 ib_init;
752         u32 ib_arm;
753         u32 ib_active;
754
755         u16 ipath_rhf_offset; /* offset of RHF within receive header entry */
756
757         /*
758          * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol
759          * reg. Changes for IBA7220
760          */
761         u8 ibcc_lic_mask; /* LinkInitCmd */
762         u8 ibcc_lc_shift; /* LinkCmd */
763         u8 ibcc_mpl_shift; /* Maxpktlen */
764
765         u8 delay_mult;
766
767         /* used to override LED behavior */
768         u8 ipath_led_override;  /* Substituted for normal value, if non-zero */
769         u16 ipath_led_override_timeoff; /* delta to next timer event */
770         u8 ipath_led_override_vals[2]; /* Alternates per blink-frame */
771         u8 ipath_led_override_phase; /* Just counts, LSB picks from vals[] */
772         atomic_t ipath_led_override_timer_active;
773         /* Used to flash LEDs in override mode */
774         struct timer_list ipath_led_override_timer;
775
776         /* Support (including locks) for EEPROM logging of errors and time */
777         /* control access to actual counters, timer */
778         spinlock_t ipath_eep_st_lock;
779         /* control high-level access to EEPROM */
780         struct mutex ipath_eep_lock;
781         /* Below inc'd by ipath_snap_cntrs(), locked by ipath_eep_st_lock */
782         uint64_t ipath_traffic_wds;
783         /* active time is kept in seconds, but logged in hours */
784         atomic_t ipath_active_time;
785         /* Below are nominal shadow of EEPROM, new since last EEPROM update */
786         uint8_t ipath_eep_st_errs[IPATH_EEP_LOG_CNT];
787         uint8_t ipath_eep_st_new_errs[IPATH_EEP_LOG_CNT];
788         uint16_t ipath_eep_hrs;
789         /*
790          * masks for which bits of errs, hwerrs that cause
791          * each of the counters to increment.
792          */
793         struct ipath_eep_log_mask ipath_eep_st_masks[IPATH_EEP_LOG_CNT];
794
795         /* interrupt mitigation reload register info */
796         u16 ipath_jint_idle_ticks;      /* idle clock ticks */
797         u16 ipath_jint_max_packets;     /* max packets across all ports */
798
799         /*
800          * lock for access to SerDes, and flags to sequence preset
801          * versus steady-state. 7220-only at the moment.
802          */
803         spinlock_t ipath_sdepb_lock;
804         u8 ipath_presets_needed; /* Set if presets to be restored next DOWN */
805 };
806
807 /* ipath_hol_state values (stopping/starting user proc, send flushing) */
808 #define IPATH_HOL_UP       0
809 #define IPATH_HOL_DOWN     1
810 /* ipath_hol_next toggle values, used when hol_state IPATH_HOL_DOWN */
811 #define IPATH_HOL_DOWNSTOP 0
812 #define IPATH_HOL_DOWNCONT 1
813
814 /* bit positions for sdma_status */
815 #define IPATH_SDMA_ABORTING  0
816 #define IPATH_SDMA_DISARMED  1
817 #define IPATH_SDMA_DISABLED  2
818 #define IPATH_SDMA_LAYERBUF  3
819 #define IPATH_SDMA_RUNNING  62
820 #define IPATH_SDMA_SHUTDOWN 63
821
822 /* bit combinations that correspond to abort states */
823 #define IPATH_SDMA_ABORT_NONE 0
824 #define IPATH_SDMA_ABORT_ABORTING (1UL << IPATH_SDMA_ABORTING)
825 #define IPATH_SDMA_ABORT_DISARMED ((1UL << IPATH_SDMA_ABORTING) | \
826         (1UL << IPATH_SDMA_DISARMED))
827 #define IPATH_SDMA_ABORT_DISABLED ((1UL << IPATH_SDMA_ABORTING) | \
828         (1UL << IPATH_SDMA_DISABLED))
829 #define IPATH_SDMA_ABORT_ABORTED ((1UL << IPATH_SDMA_ABORTING) | \
830         (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
831 #define IPATH_SDMA_ABORT_MASK ((1UL<<IPATH_SDMA_ABORTING) | \
832         (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
833
834 #define IPATH_SDMA_BUF_NONE 0
835 #define IPATH_SDMA_BUF_MASK (1UL<<IPATH_SDMA_LAYERBUF)
836
837 /* Private data for file operations */
838 struct ipath_filedata {
839         struct ipath_portdata *pd;
840         unsigned subport;
841         unsigned tidcursor;
842         struct ipath_user_sdma_queue *pq;
843 };
844 extern struct list_head ipath_dev_list;
845 extern spinlock_t ipath_devs_lock;
846 extern struct ipath_devdata *ipath_lookup(int unit);
847
848 int ipath_init_chip(struct ipath_devdata *, int);
849 int ipath_enable_wc(struct ipath_devdata *dd);
850 void ipath_disable_wc(struct ipath_devdata *dd);
851 int ipath_count_units(int *npresentp, int *nupp, int *maxportsp);
852 void ipath_shutdown_device(struct ipath_devdata *);
853 void ipath_clear_freeze(struct ipath_devdata *);
854
855 struct file_operations;
856 int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
857                     struct cdev **cdevp, struct device **devp);
858 void ipath_cdev_cleanup(struct cdev **cdevp,
859                         struct device **devp);
860
861 int ipath_diag_add(struct ipath_devdata *);
862 void ipath_diag_remove(struct ipath_devdata *);
863
864 extern wait_queue_head_t ipath_state_wait;
865
866 int ipath_user_add(struct ipath_devdata *dd);
867 void ipath_user_remove(struct ipath_devdata *dd);
868
869 struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
870
871 extern int ipath_diag_inuse;
872
873 irqreturn_t ipath_intr(int irq, void *devid);
874 int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
875                      ipath_err_t err);
876 #if __IPATH_INFO || __IPATH_DBG
877 extern const char *ipath_ibcstatus_str[];
878 #endif
879
880 /* clean up any per-chip chip-specific stuff */
881 void ipath_chip_cleanup(struct ipath_devdata *);
882 /* clean up any chip type-specific stuff */
883 void ipath_chip_done(void);
884
885 /* check to see if we have to force ordering for write combining */
886 int ipath_unordered_wc(void);
887
888 void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first,
889                           unsigned cnt);
890 void ipath_cancel_sends(struct ipath_devdata *, int);
891
892 int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
893 void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
894
895 int ipath_parse_ushort(const char *str, unsigned short *valp);
896
897 void ipath_kreceive(struct ipath_portdata *);
898 int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
899 int ipath_reset_device(int);
900 void ipath_get_faststats(unsigned long);
901 int ipath_wait_linkstate(struct ipath_devdata *, u32, int);
902 int ipath_set_linkstate(struct ipath_devdata *, u8);
903 int ipath_set_mtu(struct ipath_devdata *, u16);
904 int ipath_set_lid(struct ipath_devdata *, u32, u8);
905 int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
906 void ipath_enable_armlaunch(struct ipath_devdata *);
907 void ipath_disable_armlaunch(struct ipath_devdata *);
908 void ipath_hol_down(struct ipath_devdata *);
909 void ipath_hol_up(struct ipath_devdata *);
910 void ipath_hol_event(unsigned long);
911 void ipath_toggle_rclkrls(struct ipath_devdata *);
912 void ipath_sd7220_clr_ibpar(struct ipath_devdata *);
913 void ipath_set_relock_poll(struct ipath_devdata *, int);
914 void ipath_shutdown_relock_poll(struct ipath_devdata *);
915
916 /* for use in system calls, where we want to know device type, etc. */
917 #define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd
918 #define subport_fp(fp) \
919         ((struct ipath_filedata *)(fp)->private_data)->subport
920 #define tidcursor_fp(fp) \
921         ((struct ipath_filedata *)(fp)->private_data)->tidcursor
922 #define user_sdma_queue_fp(fp) \
923         ((struct ipath_filedata *)(fp)->private_data)->pq
924
925 /*
926  * values for ipath_flags
927  */
928                 /* chip can report link latency (IB 1.2) */
929 #define IPATH_HAS_LINK_LATENCY 0x1
930                 /* The chip is up and initted */
931 #define IPATH_INITTED       0x2
932                 /* set if any user code has set kr_rcvhdrsize */
933 #define IPATH_RCVHDRSZ_SET  0x4
934                 /* The chip is present and valid for accesses */
935 #define IPATH_PRESENT       0x8
936                 /* HT link0 is only 8 bits wide, ignore upper byte crc
937                  * errors, etc. */
938 #define IPATH_8BIT_IN_HT0   0x10
939                 /* HT link1 is only 8 bits wide, ignore upper byte crc
940                  * errors, etc. */
941 #define IPATH_8BIT_IN_HT1   0x20
942                 /* The link is down */
943 #define IPATH_LINKDOWN      0x40
944                 /* The link level is up (0x11) */
945 #define IPATH_LINKINIT      0x80
946                 /* The link is in the armed (0x21) state */
947 #define IPATH_LINKARMED     0x100
948                 /* The link is in the active (0x31) state */
949 #define IPATH_LINKACTIVE    0x200
950                 /* link current state is unknown */
951 #define IPATH_LINKUNK       0x400
952                 /* Write combining flush needed for PIO */
953 #define IPATH_PIO_FLUSH_WC  0x1000
954                 /* DMA Receive tail pointer */
955 #define IPATH_NODMA_RTAIL   0x2000
956                 /* no IB cable, or no device on IB cable */
957 #define IPATH_NOCABLE       0x4000
958                 /* Supports port zero per packet receive interrupts via
959                  * GPIO */
960 #define IPATH_GPIO_INTR     0x8000
961                 /* uses the coded 4byte TID, not 8 byte */
962 #define IPATH_4BYTE_TID     0x10000
963                 /* packet/word counters are 32 bit, else those 4 counters
964                  * are 64bit */
965 #define IPATH_32BITCOUNTERS 0x20000
966                 /* Interrupt register is 64 bits */
967 #define IPATH_INTREG_64     0x40000
968                 /* can miss port0 rx interrupts */
969 #define IPATH_DISABLED      0x80000 /* administratively disabled */
970                 /* Use GPIO interrupts for new counters */
971 #define IPATH_GPIO_ERRINTRS 0x100000
972 #define IPATH_SWAP_PIOBUFS  0x200000
973                 /* Supports Send DMA */
974 #define IPATH_HAS_SEND_DMA  0x400000
975                 /* Supports Send Count (not just word count) in PBC */
976 #define IPATH_HAS_PBC_CNT   0x800000
977                 /* Suppress heartbeat, even if turning off loopback */
978 #define IPATH_NO_HRTBT      0x1000000
979 #define IPATH_HAS_THRESH_UPDATE 0x4000000
980 #define IPATH_HAS_MULT_IB_SPEED 0x8000000
981 #define IPATH_IB_AUTONEG_INPROG 0x10000000
982 #define IPATH_IB_AUTONEG_FAILED 0x20000000
983                 /* Linkdown-disable intentionally, Do not attempt to bring up */
984 #define IPATH_IB_LINK_DISABLED 0x40000000
985 #define IPATH_IB_FORCE_NOTIFY 0x80000000 /* force notify on next ib change */
986
987 /* Bits in GPIO for the added interrupts */
988 #define IPATH_GPIO_PORT0_BIT 2
989 #define IPATH_GPIO_RXUVL_BIT 3
990 #define IPATH_GPIO_OVRUN_BIT 4
991 #define IPATH_GPIO_LLI_BIT 5
992 #define IPATH_GPIO_ERRINTR_MASK 0x38
993
994 /* portdata flag bit offsets */
995                 /* waiting for a packet to arrive */
996 #define IPATH_PORT_WAITING_RCV   2
997                 /* master has not finished initializing */
998 #define IPATH_PORT_MASTER_UNINIT 4
999                 /* waiting for an urgent packet to arrive */
1000 #define IPATH_PORT_WAITING_URG 5
1001
1002 /* free up any allocated data at closes */
1003 void ipath_free_data(struct ipath_portdata *dd);
1004 u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
1005 void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
1006                                 unsigned len, int avail);
1007 void ipath_init_iba7220_funcs(struct ipath_devdata *);
1008 void ipath_init_iba6120_funcs(struct ipath_devdata *);
1009 void ipath_init_iba6110_funcs(struct ipath_devdata *);
1010 void ipath_get_eeprom_info(struct ipath_devdata *);
1011 int ipath_update_eeprom_log(struct ipath_devdata *dd);
1012 void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
1013 u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
1014 void ipath_disarm_senderrbufs(struct ipath_devdata *, int);
1015 void ipath_force_pio_avail_update(struct ipath_devdata *);
1016 void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
1017
1018 /*
1019  * Set LED override, only the two LSBs have "public" meaning, but
1020  * any non-zero value substitutes them for the Link and LinkTrain
1021  * LED states.
1022  */
1023 #define IPATH_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
1024 #define IPATH_LED_LOG 2  /* Logical (link) YELLOW LED */
1025 void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val);
1026
1027 /* send dma routines */
1028 int setup_sdma(struct ipath_devdata *);
1029 void teardown_sdma(struct ipath_devdata *);
1030 void ipath_restart_sdma(struct ipath_devdata *);
1031 void ipath_sdma_intr(struct ipath_devdata *);
1032 int ipath_sdma_verbs_send(struct ipath_devdata *, struct ipath_sge_state *,
1033                           u32, struct ipath_verbs_txreq *);
1034 /* ipath_sdma_lock should be locked before calling this. */
1035 int ipath_sdma_make_progress(struct ipath_devdata *dd);
1036
1037 /* must be called under ipath_sdma_lock */
1038 static inline u16 ipath_sdma_descq_freecnt(const struct ipath_devdata *dd)
1039 {
1040         return dd->ipath_sdma_descq_cnt -
1041                 (dd->ipath_sdma_descq_added - dd->ipath_sdma_descq_removed) -
1042                 1 - dd->ipath_sdma_desc_nreserved;
1043 }
1044
1045 static inline void ipath_sdma_desc_reserve(struct ipath_devdata *dd, u16 cnt)
1046 {
1047         dd->ipath_sdma_desc_nreserved += cnt;
1048 }
1049
1050 static inline void ipath_sdma_desc_unreserve(struct ipath_devdata *dd, u16 cnt)
1051 {
1052         dd->ipath_sdma_desc_nreserved -= cnt;
1053 }
1054
1055 /*
1056  * number of words used for protocol header if not set by ipath_userinit();
1057  */
1058 #define IPATH_DFLT_RCVHDRSIZE 9
1059
1060 int ipath_get_user_pages(unsigned long, size_t, struct page **);
1061 void ipath_release_user_pages(struct page **, size_t);
1062 void ipath_release_user_pages_on_close(struct page **, size_t);
1063 int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
1064 int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
1065 int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
1066 int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
1067
1068 /* these are used for the registers that vary with port */
1069 void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
1070                            unsigned, u64);
1071
1072 /*
1073  * We could have a single register get/put routine, that takes a group type,
1074  * but this is somewhat clearer and cleaner.  It also gives us some error
1075  * checking.  64 bit register reads should always work, but are inefficient
1076  * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
1077  * so we use kreg32 wherever possible.  User register and counter register
1078  * reads are always 32 bit reads, so only one form of those routines.
1079  */
1080
1081 /*
1082  * At the moment, none of the s-registers are writable, so no
1083  * ipath_write_sreg().
1084  */
1085
1086 /**
1087  * ipath_read_ureg32 - read 32-bit virtualized per-port register
1088  * @dd: device
1089  * @regno: register number
1090  * @port: port number
1091  *
1092  * Return the contents of a register that is virtualized to be per port.
1093  * Returns -1 on errors (not distinguishable from valid contents at
1094  * runtime; we may add a separate error variable at some point).
1095  */
1096 static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
1097                                     ipath_ureg regno, int port)
1098 {
1099         if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
1100                 return 0;
1101
1102         return readl(regno + (u64 __iomem *)
1103                      (dd->ipath_uregbase +
1104                       (char __iomem *)dd->ipath_kregbase +
1105                       dd->ipath_ureg_align * port));
1106 }
1107
1108 /**
1109  * ipath_write_ureg - write 32-bit virtualized per-port register
1110  * @dd: device
1111  * @regno: register number
1112  * @value: value
1113  * @port: port
1114  *
1115  * Write the contents of a register that is virtualized to be per port.
1116  */
1117 static inline void ipath_write_ureg(const struct ipath_devdata *dd,
1118                                     ipath_ureg regno, u64 value, int port)
1119 {
1120         u64 __iomem *ubase = (u64 __iomem *)
1121                 (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
1122                  dd->ipath_ureg_align * port);
1123         if (dd->ipath_kregbase)
1124                 writeq(value, &ubase[regno]);
1125 }
1126
1127 static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
1128                                     ipath_kreg regno)
1129 {
1130         if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
1131                 return -1;
1132         return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
1133 }
1134
1135 static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
1136                                     ipath_kreg regno)
1137 {
1138         if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
1139                 return -1;
1140
1141         return readq(&dd->ipath_kregbase[regno]);
1142 }
1143
1144 static inline void ipath_write_kreg(const struct ipath_devdata *dd,
1145                                     ipath_kreg regno, u64 value)
1146 {
1147         if (dd->ipath_kregbase)
1148                 writeq(value, &dd->ipath_kregbase[regno]);
1149 }
1150
1151 static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
1152                                   ipath_sreg regno)
1153 {
1154         if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
1155                 return 0;
1156
1157         return readq(regno + (u64 __iomem *)
1158                      (dd->ipath_cregbase +
1159                       (char __iomem *)dd->ipath_kregbase));
1160 }
1161
1162 static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
1163                                          ipath_sreg regno)
1164 {
1165         if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
1166                 return 0;
1167         return readl(regno + (u64 __iomem *)
1168                      (dd->ipath_cregbase +
1169                       (char __iomem *)dd->ipath_kregbase));
1170 }
1171
1172 static inline void ipath_write_creg(const struct ipath_devdata *dd,
1173                                     ipath_creg regno, u64 value)
1174 {
1175         if (dd->ipath_kregbase)
1176                 writeq(value, regno + (u64 __iomem *)
1177                        (dd->ipath_cregbase +
1178                         (char __iomem *)dd->ipath_kregbase));
1179 }
1180
1181 static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd)
1182 {
1183         *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL;
1184 }
1185
1186 static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
1187 {
1188         return (u32) le64_to_cpu(*((volatile __le64 *)
1189                                 pd->port_rcvhdrtail_kvaddr));
1190 }
1191
1192 static inline u32 ipath_get_hdrqtail(const struct ipath_portdata *pd)
1193 {
1194         const struct ipath_devdata *dd = pd->port_dd;
1195         u32 hdrqtail;
1196
1197         if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
1198                 __le32 *rhf_addr;
1199                 u32 seq;
1200
1201                 rhf_addr = (__le32 *) pd->port_rcvhdrq +
1202                         pd->port_head + dd->ipath_rhf_offset;
1203                 seq = ipath_hdrget_seq(rhf_addr);
1204                 hdrqtail = pd->port_head;
1205                 if (seq == pd->port_seq_cnt)
1206                         hdrqtail++;
1207         } else
1208                 hdrqtail = ipath_get_rcvhdrtail(pd);
1209
1210         return hdrqtail;
1211 }
1212
1213 static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
1214 {
1215         return (dd->ipath_flags & IPATH_INTREG_64) ?
1216                 ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r);
1217 }
1218
1219 /*
1220  * from contents of IBCStatus (or a saved copy), return linkstate
1221  * Report ACTIVE_DEFER as ACTIVE, because we treat them the same
1222  * everywhere, anyway (and should be, for almost all purposes).
1223  */
1224 static inline u32 ipath_ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
1225 {
1226         u32 state = (u32)(ibcs >> dd->ibcs_ls_shift) &
1227                 INFINIPATH_IBCS_LINKSTATE_MASK;
1228         if (state == INFINIPATH_IBCS_L_STATE_ACT_DEFER)
1229                 state = INFINIPATH_IBCS_L_STATE_ACTIVE;
1230         return state;
1231 }
1232
1233 /* from contents of IBCStatus (or a saved copy), return linktrainingstate */
1234 static inline u32 ipath_ib_linktrstate(struct ipath_devdata *dd, u64 ibcs)
1235 {
1236         return (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
1237                 dd->ibcs_lts_mask;
1238 }
1239
1240 /*
1241  * from contents of IBCStatus (or a saved copy), return logical link state
1242  * combination of link state and linktraining state (down, active, init,
1243  * arm, etc.
1244  */
1245 static inline u32 ipath_ib_state(struct ipath_devdata *dd, u64 ibcs)
1246 {
1247         u32 ibs;
1248         ibs = (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
1249                 dd->ibcs_lts_mask;
1250         ibs |= (u32)(ibcs &
1251                 (INFINIPATH_IBCS_LINKSTATE_MASK << dd->ibcs_ls_shift));
1252         return ibs;
1253 }
1254
1255 /*
1256  * sysfs interface.
1257  */
1258
1259 struct device_driver;
1260
1261 extern const char ib_ipath_version[];
1262
1263 extern struct attribute_group *ipath_driver_attr_groups[];
1264
1265 int ipath_device_create_group(struct device *, struct ipath_devdata *);
1266 void ipath_device_remove_group(struct device *, struct ipath_devdata *);
1267 int ipath_expose_reset(struct device *);
1268
1269 int ipath_init_ipathfs(void);
1270 void ipath_exit_ipathfs(void);
1271 int ipathfs_add_device(struct ipath_devdata *);
1272 int ipathfs_remove_device(struct ipath_devdata *);
1273
1274 /*
1275  * dma_addr wrappers - all 0's invalid for hw
1276  */
1277 dma_addr_t ipath_map_page(struct pci_dev *, struct page *, unsigned long,
1278                           size_t, int);
1279 dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int);
1280 const char *ipath_get_unit_name(int unit);
1281
1282 /*
1283  * Flush write combining store buffers (if present) and perform a write
1284  * barrier.
1285  */
1286 #if defined(CONFIG_X86_64)
1287 #define ipath_flush_wc() asm volatile("sfence" ::: "memory")
1288 #else
1289 #define ipath_flush_wc() wmb()
1290 #endif
1291
1292 extern unsigned ipath_debug; /* debugging bit mask */
1293 extern unsigned ipath_linkrecovery;
1294 extern unsigned ipath_mtu4096;
1295 extern struct mutex ipath_mutex;
1296
1297 #define IPATH_DRV_NAME          "ib_ipath"
1298 #define IPATH_MAJOR             233
1299 #define IPATH_USER_MINOR_BASE   0
1300 #define IPATH_DIAGPKT_MINOR     127
1301 #define IPATH_DIAG_MINOR_BASE   129
1302 #define IPATH_NMINORS           255
1303
1304 #define ipath_dev_err(dd,fmt,...) \
1305         do { \
1306                 const struct ipath_devdata *__dd = (dd); \
1307                 if (__dd->pcidev) \
1308                         dev_err(&__dd->pcidev->dev, "%s: " fmt, \
1309                                 ipath_get_unit_name(__dd->ipath_unit), \
1310                                 ##__VA_ARGS__); \
1311                 else \
1312                         printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
1313                                ipath_get_unit_name(__dd->ipath_unit), \
1314                                ##__VA_ARGS__); \
1315         } while (0)
1316
1317 #if _IPATH_DEBUGGING
1318
1319 # define __IPATH_DBG_WHICH(which,fmt,...) \
1320         do { \
1321                 if (unlikely(ipath_debug & (which))) \
1322                         printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
1323                                __func__,##__VA_ARGS__); \
1324         } while(0)
1325
1326 # define ipath_dbg(fmt,...) \
1327         __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
1328 # define ipath_cdbg(which,fmt,...) \
1329         __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
1330
1331 #else /* ! _IPATH_DEBUGGING */
1332
1333 # define ipath_dbg(fmt,...)
1334 # define ipath_cdbg(which,fmt,...)
1335
1336 #endif /* _IPATH_DEBUGGING */
1337
1338 /*
1339  * this is used for formatting hw error messages...
1340  */
1341 struct ipath_hwerror_msgs {
1342         u64 mask;
1343         const char *msg;
1344 };
1345
1346 #define INFINIPATH_HWE_MSG(a, b) { .mask = INFINIPATH_HWE_##a, .msg = b }
1347
1348 /* in ipath_intr.c... */
1349 void ipath_format_hwerrors(u64 hwerrs,
1350                            const struct ipath_hwerror_msgs *hwerrmsgs,
1351                            size_t nhwerrmsgs,
1352                            char *msg, size_t lmsg);
1353
1354 #endif                          /* _IPATH_KERNEL_H */