2 * sbp2.c - SBP-2 protocol driver for IEEE-1394
4 * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
5 * jamesg@filanet.com (JSG)
7 * Copyright (C) 2003 Ben Collins <bcollins@debian.org>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software Foundation,
21 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
27 * This driver implements the Serial Bus Protocol 2 (SBP-2) over IEEE-1394
28 * under Linux. The SBP-2 driver is implemented as an IEEE-1394 high-level
29 * driver. It also registers as a SCSI lower-level driver in order to accept
30 * SCSI commands for transport using SBP-2.
32 * You may access any attached SBP-2 (usually storage devices) as regular
33 * SCSI devices. E.g. mount /dev/sda1, fdisk, mkfs, etc..
35 * See http://www.t10.org/drafts.htm#sbp2 for the final draft of the SBP-2
36 * specification and for where to purchase the official standard.
39 * - look into possible improvements of the SCSI error handlers
40 * - handle Unit_Characteristics.mgt_ORB_timeout and .ORB_size
41 * - handle Logical_Unit_Number.ordered
42 * - handle src == 1 in status blocks
43 * - reimplement the DMA mapping in absence of physical DMA so that
44 * bus_to_virt is no longer required
45 * - debug the handling of absent physical DMA
46 * - replace CONFIG_IEEE1394_SBP2_PHYS_DMA by automatic detection
47 * (this is easy but depends on the previous two TODO items)
48 * - make the parameter serialize_io configurable per device
49 * - move all requests to fetch agent registers into non-atomic context,
50 * replace all usages of sbp2util_node_write_no_wait by true transactions
51 * Grep for inline FIXME comments below.
54 #include <linux/blkdev.h>
55 #include <linux/compiler.h>
56 #include <linux/delay.h>
57 #include <linux/device.h>
58 #include <linux/dma-mapping.h>
59 #include <linux/gfp.h>
60 #include <linux/init.h>
61 #include <linux/kernel.h>
62 #include <linux/list.h>
63 #include <linux/module.h>
64 #include <linux/moduleparam.h>
65 #include <linux/slab.h>
66 #include <linux/spinlock.h>
67 #include <linux/stat.h>
68 #include <linux/string.h>
69 #include <linux/stringify.h>
70 #include <linux/types.h>
71 #include <linux/wait.h>
73 #include <asm/byteorder.h>
74 #include <asm/errno.h>
75 #include <asm/param.h>
76 #include <asm/scatterlist.h>
77 #include <asm/system.h>
78 #include <asm/types.h>
80 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
81 #include <asm/io.h> /* for bus_to_virt */
84 #include <scsi/scsi.h>
85 #include <scsi/scsi_cmnd.h>
86 #include <scsi/scsi_dbg.h>
87 #include <scsi/scsi_device.h>
88 #include <scsi/scsi_host.h>
91 #include "highlevel.h"
94 #include "ieee1394_core.h"
95 #include "ieee1394_hotplug.h"
96 #include "ieee1394_transactions.h"
97 #include "ieee1394_types.h"
102 * Module load parameter definitions
106 * Change max_speed on module load if you have a bad IEEE-1394
107 * controller that has trouble running 2KB packets at 400mb.
109 * NOTE: On certain OHCI parts I have seen short packets on async transmit
110 * (probably due to PCI latency/throughput issues with the part). You can
111 * bump down the speed if you are running into problems.
113 static int sbp2_max_speed = IEEE1394_SPEED_MAX;
114 module_param_named(max_speed, sbp2_max_speed, int, 0644);
115 MODULE_PARM_DESC(max_speed, "Force max speed "
116 "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
119 * Set serialize_io to 1 if you'd like only one scsi command sent
120 * down to us at a time (debugging). This might be necessary for very
121 * badly behaved sbp2 devices.
123 static int sbp2_serialize_io = 1;
124 module_param_named(serialize_io, sbp2_serialize_io, int, 0444);
125 MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers "
126 "(default = 1, faster = 0)");
129 * Bump up max_sectors if you'd like to support very large sized
130 * transfers. Please note that some older sbp2 bridge chips are broken for
131 * transfers greater or equal to 128KB. Default is a value of 255
132 * sectors, or just under 128KB (at 512 byte sector size). I can note that
133 * the Oxsemi sbp2 chipsets have no problems supporting very large
136 static int sbp2_max_sectors = SBP2_MAX_SECTORS;
137 module_param_named(max_sectors, sbp2_max_sectors, int, 0444);
138 MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported "
139 "(default = " __stringify(SBP2_MAX_SECTORS) ")");
142 * Exclusive login to sbp2 device? In most cases, the sbp2 driver should
143 * do an exclusive login, as it's generally unsafe to have two hosts
144 * talking to a single sbp2 device at the same time (filesystem coherency,
145 * etc.). If you're running an sbp2 device that supports multiple logins,
146 * and you're either running read-only filesystems or some sort of special
147 * filesystem supporting multiple hosts, e.g. OpenGFS, Oracle Cluster
148 * File System, or Lustre, then set exclusive_login to zero.
150 * So far only bridges from Oxford Semiconductor are known to support
151 * concurrent logins. Depending on firmware, four or two concurrent logins
152 * are possible on OXFW911 and newer Oxsemi bridges.
154 static int sbp2_exclusive_login = 1;
155 module_param_named(exclusive_login, sbp2_exclusive_login, int, 0644);
156 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
160 * If any of the following workarounds is required for your device to work,
161 * please submit the kernel messages logged by sbp2 to the linux1394-devel
164 * - 128kB max transfer
165 * Limit transfer size. Necessary for some old bridges.
168 * When scsi_mod probes the device, let the inquiry command look like that
172 * Suppress sending of mode_sense for mode page 8 if the device pretends to
173 * support the SCSI Primary Block commands instead of Reduced Block Commands.
176 * Tell sd_mod to correct the last sector number reported by read_capacity.
177 * Avoids access beyond actual disk limits on devices with an off-by-one bug.
178 * Don't use this with devices which don't have this bug.
180 * - override internal blacklist
181 * Instead of adding to the built-in blacklist, use only the workarounds
182 * specified in the module load parameter.
183 * Useful if a blacklist entry interfered with a non-broken device.
185 static int sbp2_default_workarounds;
186 module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
187 MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
188 ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
189 ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
190 ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
191 ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
192 ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
193 ", or a combination)");
196 #define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
197 #define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
202 static void sbp2scsi_complete_all_commands(struct sbp2_lu *, u32);
203 static void sbp2scsi_complete_command(struct sbp2_lu *, u32, struct scsi_cmnd *,
204 void (*)(struct scsi_cmnd *));
205 static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *);
206 static int sbp2_start_device(struct sbp2_lu *);
207 static void sbp2_remove_device(struct sbp2_lu *);
208 static int sbp2_login_device(struct sbp2_lu *);
209 static int sbp2_reconnect_device(struct sbp2_lu *);
210 static int sbp2_logout_device(struct sbp2_lu *);
211 static void sbp2_host_reset(struct hpsb_host *);
212 static int sbp2_handle_status_write(struct hpsb_host *, int, int, quadlet_t *,
214 static int sbp2_agent_reset(struct sbp2_lu *, int);
215 static void sbp2_parse_unit_directory(struct sbp2_lu *,
216 struct unit_directory *);
217 static int sbp2_set_busy_timeout(struct sbp2_lu *);
218 static int sbp2_max_speed_and_size(struct sbp2_lu *);
221 static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
223 static struct hpsb_highlevel sbp2_highlevel = {
224 .name = SBP2_DEVICE_NAME,
225 .host_reset = sbp2_host_reset,
228 static struct hpsb_address_ops sbp2_ops = {
229 .write = sbp2_handle_status_write
232 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
233 static int sbp2_handle_physdma_write(struct hpsb_host *, int, int, quadlet_t *,
235 static int sbp2_handle_physdma_read(struct hpsb_host *, int, quadlet_t *, u64,
238 static struct hpsb_address_ops sbp2_physdma_ops = {
239 .read = sbp2_handle_physdma_read,
240 .write = sbp2_handle_physdma_write,
246 * Interface to driver core and IEEE 1394 core
248 static struct ieee1394_device_id sbp2_id_table[] = {
250 .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION,
251 .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff,
252 .version = SBP2_SW_VERSION_ENTRY & 0xffffff},
255 MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table);
257 static int sbp2_probe(struct device *);
258 static int sbp2_remove(struct device *);
259 static int sbp2_update(struct unit_directory *);
261 static struct hpsb_protocol_driver sbp2_driver = {
262 .name = SBP2_DEVICE_NAME,
263 .id_table = sbp2_id_table,
264 .update = sbp2_update,
267 .remove = sbp2_remove,
273 * Interface to SCSI core
275 static int sbp2scsi_queuecommand(struct scsi_cmnd *,
276 void (*)(struct scsi_cmnd *));
277 static int sbp2scsi_abort(struct scsi_cmnd *);
278 static int sbp2scsi_reset(struct scsi_cmnd *);
279 static int sbp2scsi_slave_alloc(struct scsi_device *);
280 static int sbp2scsi_slave_configure(struct scsi_device *);
281 static void sbp2scsi_slave_destroy(struct scsi_device *);
282 static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *,
283 struct device_attribute *, char *);
285 static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL);
287 static struct device_attribute *sbp2_sysfs_sdev_attrs[] = {
288 &dev_attr_ieee1394_id,
292 static struct scsi_host_template sbp2_shost_template = {
293 .module = THIS_MODULE,
294 .name = "SBP-2 IEEE-1394",
295 .proc_name = SBP2_DEVICE_NAME,
296 .queuecommand = sbp2scsi_queuecommand,
297 .eh_abort_handler = sbp2scsi_abort,
298 .eh_device_reset_handler = sbp2scsi_reset,
299 .slave_alloc = sbp2scsi_slave_alloc,
300 .slave_configure = sbp2scsi_slave_configure,
301 .slave_destroy = sbp2scsi_slave_destroy,
303 .sg_tablesize = SG_ALL,
304 .use_clustering = ENABLE_CLUSTERING,
305 .cmd_per_lun = SBP2_MAX_CMDS,
306 .can_queue = SBP2_MAX_CMDS,
308 .sdev_attrs = sbp2_sysfs_sdev_attrs,
311 /* for match-all entries in sbp2_workarounds_table */
312 #define SBP2_ROM_VALUE_WILDCARD 0x1000000
315 * List of devices with known bugs.
317 * The firmware_revision field, masked with 0xffff00, is the best indicator
318 * for the type of bridge chip of a device. It yields a few false positives
319 * but this did not break correctly behaving devices so far.
321 static const struct {
322 u32 firmware_revision;
324 unsigned workarounds;
325 } sbp2_workarounds_table[] = {
326 /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
327 .firmware_revision = 0x002800,
328 .model_id = 0x001010,
329 .workarounds = SBP2_WORKAROUND_INQUIRY_36 |
330 SBP2_WORKAROUND_MODE_SENSE_8,
332 /* Initio bridges, actually only needed for some older ones */ {
333 .firmware_revision = 0x000200,
334 .model_id = SBP2_ROM_VALUE_WILDCARD,
335 .workarounds = SBP2_WORKAROUND_INQUIRY_36,
337 /* Symbios bridge */ {
338 .firmware_revision = 0xa0b800,
339 .model_id = SBP2_ROM_VALUE_WILDCARD,
340 .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
342 /* iPod 4th generation */ {
343 .firmware_revision = 0x0a2700,
344 .model_id = 0x000021,
345 .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
348 .firmware_revision = 0x0a2700,
349 .model_id = 0x000023,
350 .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
353 .firmware_revision = 0x0a2700,
354 .model_id = 0x00007e,
355 .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
359 /**************************************
360 * General utility functions
361 **************************************/
365 * Converts a buffer from be32 to cpu byte ordering. Length is in bytes.
367 static inline void sbp2util_be32_to_cpu_buffer(void *buffer, int length)
371 for (length = (length >> 2); length--; )
372 temp[length] = be32_to_cpu(temp[length]);
376 * Converts a buffer from cpu to be32 byte ordering. Length is in bytes.
378 static inline void sbp2util_cpu_to_be32_buffer(void *buffer, int length)
382 for (length = (length >> 2); length--; )
383 temp[length] = cpu_to_be32(temp[length]);
385 #else /* BIG_ENDIAN */
386 /* Why waste the cpu cycles? */
387 #define sbp2util_be32_to_cpu_buffer(x,y) do {} while (0)
388 #define sbp2util_cpu_to_be32_buffer(x,y) do {} while (0)
391 static DECLARE_WAIT_QUEUE_HEAD(sbp2_access_wq);
394 * Waits for completion of an SBP-2 access request.
395 * Returns nonzero if timed out or prematurely interrupted.
397 static int sbp2util_access_timeout(struct sbp2_lu *lu, int timeout)
401 leftover = wait_event_interruptible_timeout(
402 sbp2_access_wq, lu->access_complete, timeout);
403 lu->access_complete = 0;
404 return leftover <= 0;
407 static void sbp2_free_packet(void *packet)
409 hpsb_free_tlabel(packet);
410 hpsb_free_packet(packet);
414 * This is much like hpsb_node_write(), except it ignores the response
415 * subaction and returns immediately. Can be used from atomic context.
417 static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr,
418 quadlet_t *buf, size_t len)
420 struct hpsb_packet *packet;
422 packet = hpsb_make_writepacket(ne->host, ne->nodeid, addr, buf, len);
426 hpsb_set_packet_complete_task(packet, sbp2_free_packet, packet);
427 hpsb_node_fill_packet(ne, packet);
428 if (hpsb_send_packet(packet) < 0) {
429 sbp2_free_packet(packet);
435 static void sbp2util_notify_fetch_agent(struct sbp2_lu *lu, u64 offset,
436 quadlet_t *data, size_t len)
438 /* There is a small window after a bus reset within which the node
439 * entry's generation is current but the reconnect wasn't completed. */
440 if (unlikely(atomic_read(&lu->state) == SBP2LU_STATE_IN_RESET))
443 if (hpsb_node_write(lu->ne, lu->command_block_agent_addr + offset,
445 SBP2_ERR("sbp2util_notify_fetch_agent failed.");
447 /* Now accept new SCSI commands, unless a bus reset happended during
448 * hpsb_node_write. */
449 if (likely(atomic_read(&lu->state) != SBP2LU_STATE_IN_RESET))
450 scsi_unblock_requests(lu->shost);
453 static void sbp2util_write_orb_pointer(struct work_struct *work)
455 struct sbp2_lu *lu = container_of(work, struct sbp2_lu, protocol_work);
458 data[0] = ORB_SET_NODE_ID(lu->hi->host->node_id);
459 data[1] = lu->last_orb_dma;
460 sbp2util_cpu_to_be32_buffer(data, 8);
461 sbp2util_notify_fetch_agent(lu, SBP2_ORB_POINTER_OFFSET, data, 8);
464 static void sbp2util_write_doorbell(struct work_struct *work)
466 struct sbp2_lu *lu = container_of(work, struct sbp2_lu, protocol_work);
468 sbp2util_notify_fetch_agent(lu, SBP2_DOORBELL_OFFSET, NULL, 4);
471 static int sbp2util_create_command_orb_pool(struct sbp2_lu *lu)
473 struct sbp2_fwhost_info *hi = lu->hi;
475 unsigned long flags, orbs;
476 struct sbp2_command_info *cmd;
478 orbs = sbp2_serialize_io ? 2 : SBP2_MAX_CMDS;
480 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
481 for (i = 0; i < orbs; i++) {
482 cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
484 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
487 cmd->command_orb_dma = dma_map_single(hi->host->device.parent,
489 sizeof(struct sbp2_command_orb),
491 cmd->sge_dma = dma_map_single(hi->host->device.parent,
492 &cmd->scatter_gather_element,
493 sizeof(cmd->scatter_gather_element),
495 INIT_LIST_HEAD(&cmd->list);
496 list_add_tail(&cmd->list, &lu->cmd_orb_completed);
498 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
502 static void sbp2util_remove_command_orb_pool(struct sbp2_lu *lu)
504 struct hpsb_host *host = lu->hi->host;
505 struct list_head *lh, *next;
506 struct sbp2_command_info *cmd;
509 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
510 if (!list_empty(&lu->cmd_orb_completed))
511 list_for_each_safe(lh, next, &lu->cmd_orb_completed) {
512 cmd = list_entry(lh, struct sbp2_command_info, list);
513 dma_unmap_single(host->device.parent,
514 cmd->command_orb_dma,
515 sizeof(struct sbp2_command_orb),
517 dma_unmap_single(host->device.parent, cmd->sge_dma,
518 sizeof(cmd->scatter_gather_element),
522 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
527 * Finds the sbp2_command for a given outstanding command ORB.
528 * Only looks at the in-use list.
530 static struct sbp2_command_info *sbp2util_find_command_for_orb(
531 struct sbp2_lu *lu, dma_addr_t orb)
533 struct sbp2_command_info *cmd;
536 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
537 if (!list_empty(&lu->cmd_orb_inuse))
538 list_for_each_entry(cmd, &lu->cmd_orb_inuse, list)
539 if (cmd->command_orb_dma == orb) {
540 spin_unlock_irqrestore(
541 &lu->cmd_orb_lock, flags);
544 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
549 * Finds the sbp2_command for a given outstanding SCpnt.
550 * Only looks at the in-use list.
551 * Must be called with lu->cmd_orb_lock held.
553 static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(
554 struct sbp2_lu *lu, void *SCpnt)
556 struct sbp2_command_info *cmd;
558 if (!list_empty(&lu->cmd_orb_inuse))
559 list_for_each_entry(cmd, &lu->cmd_orb_inuse, list)
560 if (cmd->Current_SCpnt == SCpnt)
565 static struct sbp2_command_info *sbp2util_allocate_command_orb(
567 struct scsi_cmnd *Current_SCpnt,
568 void (*Current_done)(struct scsi_cmnd *))
570 struct list_head *lh;
571 struct sbp2_command_info *cmd = NULL;
574 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
575 if (!list_empty(&lu->cmd_orb_completed)) {
576 lh = lu->cmd_orb_completed.next;
578 cmd = list_entry(lh, struct sbp2_command_info, list);
579 cmd->Current_done = Current_done;
580 cmd->Current_SCpnt = Current_SCpnt;
581 list_add_tail(&cmd->list, &lu->cmd_orb_inuse);
583 SBP2_ERR("%s: no orbs available", __FUNCTION__);
584 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
589 * Unmaps the DMAs of a command and moves the command to the completed ORB list.
590 * Must be called with lu->cmd_orb_lock held.
592 static void sbp2util_mark_command_completed(struct sbp2_lu *lu,
593 struct sbp2_command_info *cmd)
595 struct hpsb_host *host = lu->ud->ne->host;
598 if (cmd->dma_type == CMD_DMA_SINGLE)
599 dma_unmap_single(host->device.parent, cmd->cmd_dma,
600 cmd->dma_size, cmd->dma_dir);
601 else if (cmd->dma_type == CMD_DMA_PAGE)
602 dma_unmap_page(host->device.parent, cmd->cmd_dma,
603 cmd->dma_size, cmd->dma_dir);
604 /* XXX: Check for CMD_DMA_NONE bug */
605 cmd->dma_type = CMD_DMA_NONE;
608 if (cmd->sge_buffer) {
609 dma_unmap_sg(host->device.parent, cmd->sge_buffer,
610 cmd->dma_size, cmd->dma_dir);
611 cmd->sge_buffer = NULL;
613 list_move_tail(&cmd->list, &lu->cmd_orb_completed);
617 * Is lu valid? Is the 1394 node still present?
619 static inline int sbp2util_node_is_available(struct sbp2_lu *lu)
621 return lu && lu->ne && !lu->ne->in_limbo;
624 /*********************************************
625 * IEEE-1394 core driver stack related section
626 *********************************************/
628 static int sbp2_probe(struct device *dev)
630 struct unit_directory *ud;
633 ud = container_of(dev, struct unit_directory, device);
635 /* Don't probe UD's that have the LUN flag. We'll probe the LUN(s)
637 if (ud->flags & UNIT_DIRECTORY_HAS_LUN_DIRECTORY)
640 lu = sbp2_alloc_device(ud);
644 sbp2_parse_unit_directory(lu, ud);
645 return sbp2_start_device(lu);
648 static int sbp2_remove(struct device *dev)
650 struct unit_directory *ud;
652 struct scsi_device *sdev;
654 ud = container_of(dev, struct unit_directory, device);
655 lu = ud->device.driver_data;
660 /* Get rid of enqueued commands if there is no chance to
662 if (!sbp2util_node_is_available(lu))
663 sbp2scsi_complete_all_commands(lu, DID_NO_CONNECT);
664 /* scsi_remove_device() may trigger shutdown functions of SCSI
665 * highlevel drivers which would deadlock if blocked. */
666 atomic_set(&lu->state, SBP2LU_STATE_IN_SHUTDOWN);
667 scsi_unblock_requests(lu->shost);
672 scsi_remove_device(sdev);
675 sbp2_logout_device(lu);
676 sbp2_remove_device(lu);
681 static int sbp2_update(struct unit_directory *ud)
683 struct sbp2_lu *lu = ud->device.driver_data;
685 if (sbp2_reconnect_device(lu)) {
686 /* Reconnect has failed. Perhaps we didn't reconnect fast
687 * enough. Try a regular login, but first log out just in
688 * case of any weirdness. */
689 sbp2_logout_device(lu);
691 if (sbp2_login_device(lu)) {
692 /* Login failed too, just fail, and the backend
693 * will call our sbp2_remove for us */
694 SBP2_ERR("Failed to reconnect to sbp2 device!");
699 sbp2_set_busy_timeout(lu);
700 sbp2_agent_reset(lu, 1);
701 sbp2_max_speed_and_size(lu);
703 /* Complete any pending commands with busy (so they get retried)
704 * and remove them from our queue. */
705 sbp2scsi_complete_all_commands(lu, DID_BUS_BUSY);
707 /* Accept new commands unless there was another bus reset in the
709 if (hpsb_node_entry_valid(lu->ne)) {
710 atomic_set(&lu->state, SBP2LU_STATE_RUNNING);
711 scsi_unblock_requests(lu->shost);
716 static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud)
718 struct sbp2_fwhost_info *hi;
719 struct Scsi_Host *shost = NULL;
720 struct sbp2_lu *lu = NULL;
722 lu = kzalloc(sizeof(*lu), GFP_KERNEL);
724 SBP2_ERR("failed to create lu");
730 lu->speed_code = IEEE1394_SPEED_100;
731 lu->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
732 lu->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
733 INIT_LIST_HEAD(&lu->cmd_orb_inuse);
734 INIT_LIST_HEAD(&lu->cmd_orb_completed);
735 INIT_LIST_HEAD(&lu->lu_list);
736 spin_lock_init(&lu->cmd_orb_lock);
737 atomic_set(&lu->state, SBP2LU_STATE_RUNNING);
738 INIT_WORK(&lu->protocol_work, NULL);
740 ud->device.driver_data = lu;
742 hi = hpsb_get_hostinfo(&sbp2_highlevel, ud->ne->host);
744 hi = hpsb_create_hostinfo(&sbp2_highlevel, ud->ne->host,
747 SBP2_ERR("failed to allocate hostinfo");
750 hi->host = ud->ne->host;
751 INIT_LIST_HEAD(&hi->logical_units);
753 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
754 /* Handle data movement if physical dma is not
755 * enabled or not supported on host controller */
756 if (!hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host,
758 0x0ULL, 0xfffffffcULL)) {
759 SBP2_ERR("failed to register lower 4GB address range");
765 /* Prevent unloading of the 1394 host */
766 if (!try_module_get(hi->host->driver->owner)) {
767 SBP2_ERR("failed to get a reference on 1394 host driver");
773 list_add_tail(&lu->lu_list, &hi->logical_units);
775 /* Register the status FIFO address range. We could use the same FIFO
776 * for targets at different nodes. However we need different FIFOs per
777 * target in order to support multi-unit devices.
778 * The FIFO is located out of the local host controller's physical range
779 * but, if possible, within the posted write area. Status writes will
780 * then be performed as unified transactions. This slightly reduces
781 * bandwidth usage, and some Prolific based devices seem to require it.
783 lu->status_fifo_addr = hpsb_allocate_and_register_addrspace(
784 &sbp2_highlevel, ud->ne->host, &sbp2_ops,
785 sizeof(struct sbp2_status_block), sizeof(quadlet_t),
786 ud->ne->host->low_addr_space, CSR1212_ALL_SPACE_END);
787 if (lu->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) {
788 SBP2_ERR("failed to allocate status FIFO address range");
792 shost = scsi_host_alloc(&sbp2_shost_template, sizeof(unsigned long));
794 SBP2_ERR("failed to register scsi host");
798 shost->hostdata[0] = (unsigned long)lu;
800 if (!scsi_add_host(shost, &ud->device)) {
805 SBP2_ERR("failed to add scsi host");
806 scsi_host_put(shost);
809 sbp2_remove_device(lu);
813 static void sbp2_host_reset(struct hpsb_host *host)
815 struct sbp2_fwhost_info *hi;
818 hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
821 list_for_each_entry(lu, &hi->logical_units, lu_list)
822 if (likely(atomic_read(&lu->state) !=
823 SBP2LU_STATE_IN_SHUTDOWN)) {
824 atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
825 scsi_block_requests(lu->shost);
829 static int sbp2_start_device(struct sbp2_lu *lu)
831 struct sbp2_fwhost_info *hi = lu->hi;
834 lu->login_response = dma_alloc_coherent(hi->host->device.parent,
835 sizeof(struct sbp2_login_response),
836 &lu->login_response_dma, GFP_KERNEL);
837 if (!lu->login_response)
840 lu->query_logins_orb = dma_alloc_coherent(hi->host->device.parent,
841 sizeof(struct sbp2_query_logins_orb),
842 &lu->query_logins_orb_dma, GFP_KERNEL);
843 if (!lu->query_logins_orb)
846 lu->query_logins_response = dma_alloc_coherent(hi->host->device.parent,
847 sizeof(struct sbp2_query_logins_response),
848 &lu->query_logins_response_dma, GFP_KERNEL);
849 if (!lu->query_logins_response)
852 lu->reconnect_orb = dma_alloc_coherent(hi->host->device.parent,
853 sizeof(struct sbp2_reconnect_orb),
854 &lu->reconnect_orb_dma, GFP_KERNEL);
855 if (!lu->reconnect_orb)
858 lu->logout_orb = dma_alloc_coherent(hi->host->device.parent,
859 sizeof(struct sbp2_logout_orb),
860 &lu->logout_orb_dma, GFP_KERNEL);
864 lu->login_orb = dma_alloc_coherent(hi->host->device.parent,
865 sizeof(struct sbp2_login_orb),
866 &lu->login_orb_dma, GFP_KERNEL);
870 if (sbp2util_create_command_orb_pool(lu)) {
871 SBP2_ERR("sbp2util_create_command_orb_pool failed!");
872 sbp2_remove_device(lu);
876 /* Wait a second before trying to log in. Previously logged in
877 * initiators need a chance to reconnect. */
878 if (msleep_interruptible(1000)) {
879 sbp2_remove_device(lu);
883 if (sbp2_login_device(lu)) {
884 sbp2_remove_device(lu);
888 sbp2_set_busy_timeout(lu);
889 sbp2_agent_reset(lu, 1);
890 sbp2_max_speed_and_size(lu);
892 error = scsi_add_device(lu->shost, 0, lu->ud->id, 0);
894 SBP2_ERR("scsi_add_device failed");
895 sbp2_logout_device(lu);
896 sbp2_remove_device(lu);
903 SBP2_ERR("Could not allocate memory for lu");
904 sbp2_remove_device(lu);
908 static void sbp2_remove_device(struct sbp2_lu *lu)
910 struct sbp2_fwhost_info *hi;
918 scsi_remove_host(lu->shost);
919 scsi_host_put(lu->shost);
921 flush_scheduled_work();
922 sbp2util_remove_command_orb_pool(lu);
924 list_del(&lu->lu_list);
926 if (lu->login_response)
927 dma_free_coherent(hi->host->device.parent,
928 sizeof(struct sbp2_login_response),
930 lu->login_response_dma);
932 dma_free_coherent(hi->host->device.parent,
933 sizeof(struct sbp2_login_orb),
936 if (lu->reconnect_orb)
937 dma_free_coherent(hi->host->device.parent,
938 sizeof(struct sbp2_reconnect_orb),
940 lu->reconnect_orb_dma);
942 dma_free_coherent(hi->host->device.parent,
943 sizeof(struct sbp2_logout_orb),
946 if (lu->query_logins_orb)
947 dma_free_coherent(hi->host->device.parent,
948 sizeof(struct sbp2_query_logins_orb),
949 lu->query_logins_orb,
950 lu->query_logins_orb_dma);
951 if (lu->query_logins_response)
952 dma_free_coherent(hi->host->device.parent,
953 sizeof(struct sbp2_query_logins_response),
954 lu->query_logins_response,
955 lu->query_logins_response_dma);
957 if (lu->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE)
958 hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
959 lu->status_fifo_addr);
961 lu->ud->device.driver_data = NULL;
964 module_put(hi->host->driver->owner);
969 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
971 * Deal with write requests on adapters which do not support physical DMA or
972 * have it switched off.
974 static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid,
975 int destid, quadlet_t *data, u64 addr,
976 size_t length, u16 flags)
978 memcpy(bus_to_virt((u32) addr), data, length);
979 return RCODE_COMPLETE;
983 * Deal with read requests on adapters which do not support physical DMA or
984 * have it switched off.
986 static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid,
987 quadlet_t *data, u64 addr, size_t length,
990 memcpy(data, bus_to_virt((u32) addr), length);
991 return RCODE_COMPLETE;
995 /**************************************
996 * SBP-2 protocol related section
997 **************************************/
999 static int sbp2_query_logins(struct sbp2_lu *lu)
1001 struct sbp2_fwhost_info *hi = lu->hi;
1006 lu->query_logins_orb->reserved1 = 0x0;
1007 lu->query_logins_orb->reserved2 = 0x0;
1009 lu->query_logins_orb->query_response_lo = lu->query_logins_response_dma;
1010 lu->query_logins_orb->query_response_hi =
1011 ORB_SET_NODE_ID(hi->host->node_id);
1012 lu->query_logins_orb->lun_misc =
1013 ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST);
1014 lu->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1);
1015 lu->query_logins_orb->lun_misc |= ORB_SET_LUN(lu->lun);
1017 lu->query_logins_orb->reserved_resp_length =
1018 ORB_SET_QUERY_LOGINS_RESP_LENGTH(
1019 sizeof(struct sbp2_query_logins_response));
1021 lu->query_logins_orb->status_fifo_hi =
1022 ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
1023 lu->query_logins_orb->status_fifo_lo =
1024 ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
1026 sbp2util_cpu_to_be32_buffer(lu->query_logins_orb,
1027 sizeof(struct sbp2_query_logins_orb));
1029 memset(lu->query_logins_response, 0,
1030 sizeof(struct sbp2_query_logins_response));
1032 data[0] = ORB_SET_NODE_ID(hi->host->node_id);
1033 data[1] = lu->query_logins_orb_dma;
1034 sbp2util_cpu_to_be32_buffer(data, 8);
1036 hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
1038 if (sbp2util_access_timeout(lu, 2*HZ)) {
1039 SBP2_INFO("Error querying logins to SBP-2 device - timed out");
1043 if (lu->status_block.ORB_offset_lo != lu->query_logins_orb_dma) {
1044 SBP2_INFO("Error querying logins to SBP-2 device - timed out");
1048 if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) {
1049 SBP2_INFO("Error querying logins to SBP-2 device - failed");
1053 sbp2util_cpu_to_be32_buffer(lu->query_logins_response,
1054 sizeof(struct sbp2_query_logins_response));
1056 max_logins = RESPONSE_GET_MAX_LOGINS(
1057 lu->query_logins_response->length_max_logins);
1058 SBP2_INFO("Maximum concurrent logins supported: %d", max_logins);
1060 active_logins = RESPONSE_GET_ACTIVE_LOGINS(
1061 lu->query_logins_response->length_max_logins);
1062 SBP2_INFO("Number of active logins: %d", active_logins);
1064 if (active_logins >= max_logins) {
1071 static int sbp2_login_device(struct sbp2_lu *lu)
1073 struct sbp2_fwhost_info *hi = lu->hi;
1079 if (!sbp2_exclusive_login && sbp2_query_logins(lu)) {
1080 SBP2_INFO("Device does not support any more concurrent logins");
1084 /* assume no password */
1085 lu->login_orb->password_hi = 0;
1086 lu->login_orb->password_lo = 0;
1088 lu->login_orb->login_response_lo = lu->login_response_dma;
1089 lu->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
1090 lu->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST);
1092 /* one second reconnect time */
1093 lu->login_orb->lun_misc |= ORB_SET_RECONNECT(0);
1094 lu->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(sbp2_exclusive_login);
1095 lu->login_orb->lun_misc |= ORB_SET_NOTIFY(1);
1096 lu->login_orb->lun_misc |= ORB_SET_LUN(lu->lun);
1098 lu->login_orb->passwd_resp_lengths =
1099 ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
1101 lu->login_orb->status_fifo_hi =
1102 ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
1103 lu->login_orb->status_fifo_lo =
1104 ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
1106 sbp2util_cpu_to_be32_buffer(lu->login_orb,
1107 sizeof(struct sbp2_login_orb));
1109 memset(lu->login_response, 0, sizeof(struct sbp2_login_response));
1111 data[0] = ORB_SET_NODE_ID(hi->host->node_id);
1112 data[1] = lu->login_orb_dma;
1113 sbp2util_cpu_to_be32_buffer(data, 8);
1115 hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
1117 /* wait up to 20 seconds for login status */
1118 if (sbp2util_access_timeout(lu, 20*HZ)) {
1119 SBP2_ERR("Error logging into SBP-2 device - timed out");
1123 /* make sure that the returned status matches the login ORB */
1124 if (lu->status_block.ORB_offset_lo != lu->login_orb_dma) {
1125 SBP2_ERR("Error logging into SBP-2 device - timed out");
1129 if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) {
1130 SBP2_ERR("Error logging into SBP-2 device - failed");
1134 sbp2util_cpu_to_be32_buffer(lu->login_response,
1135 sizeof(struct sbp2_login_response));
1136 lu->command_block_agent_addr =
1137 ((u64)lu->login_response->command_block_agent_hi) << 32;
1138 lu->command_block_agent_addr |=
1139 ((u64)lu->login_response->command_block_agent_lo);
1140 lu->command_block_agent_addr &= 0x0000ffffffffffffULL;
1142 SBP2_INFO("Logged into SBP-2 device");
1146 static int sbp2_logout_device(struct sbp2_lu *lu)
1148 struct sbp2_fwhost_info *hi = lu->hi;
1152 lu->logout_orb->reserved1 = 0x0;
1153 lu->logout_orb->reserved2 = 0x0;
1154 lu->logout_orb->reserved3 = 0x0;
1155 lu->logout_orb->reserved4 = 0x0;
1157 lu->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST);
1158 lu->logout_orb->login_ID_misc |=
1159 ORB_SET_LOGIN_ID(lu->login_response->length_login_ID);
1160 lu->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
1162 lu->logout_orb->reserved5 = 0x0;
1163 lu->logout_orb->status_fifo_hi =
1164 ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
1165 lu->logout_orb->status_fifo_lo =
1166 ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
1168 sbp2util_cpu_to_be32_buffer(lu->logout_orb,
1169 sizeof(struct sbp2_logout_orb));
1171 data[0] = ORB_SET_NODE_ID(hi->host->node_id);
1172 data[1] = lu->logout_orb_dma;
1173 sbp2util_cpu_to_be32_buffer(data, 8);
1175 error = hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
1179 /* wait up to 1 second for the device to complete logout */
1180 if (sbp2util_access_timeout(lu, HZ))
1183 SBP2_INFO("Logged out of SBP-2 device");
1187 static int sbp2_reconnect_device(struct sbp2_lu *lu)
1189 struct sbp2_fwhost_info *hi = lu->hi;
1193 lu->reconnect_orb->reserved1 = 0x0;
1194 lu->reconnect_orb->reserved2 = 0x0;
1195 lu->reconnect_orb->reserved3 = 0x0;
1196 lu->reconnect_orb->reserved4 = 0x0;
1198 lu->reconnect_orb->login_ID_misc =
1199 ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST);
1200 lu->reconnect_orb->login_ID_misc |=
1201 ORB_SET_LOGIN_ID(lu->login_response->length_login_ID);
1202 lu->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
1204 lu->reconnect_orb->reserved5 = 0x0;
1205 lu->reconnect_orb->status_fifo_hi =
1206 ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
1207 lu->reconnect_orb->status_fifo_lo =
1208 ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
1210 sbp2util_cpu_to_be32_buffer(lu->reconnect_orb,
1211 sizeof(struct sbp2_reconnect_orb));
1213 data[0] = ORB_SET_NODE_ID(hi->host->node_id);
1214 data[1] = lu->reconnect_orb_dma;
1215 sbp2util_cpu_to_be32_buffer(data, 8);
1217 error = hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
1221 /* wait up to 1 second for reconnect status */
1222 if (sbp2util_access_timeout(lu, HZ)) {
1223 SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
1227 /* make sure that the returned status matches the reconnect ORB */
1228 if (lu->status_block.ORB_offset_lo != lu->reconnect_orb_dma) {
1229 SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
1233 if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) {
1234 SBP2_ERR("Error reconnecting to SBP-2 device - failed");
1238 SBP2_INFO("Reconnected to SBP-2 device");
1243 * Set the target node's Single Phase Retry limit. Affects the target's retry
1244 * behaviour if our node is too busy to accept requests.
1246 static int sbp2_set_busy_timeout(struct sbp2_lu *lu)
1250 data = cpu_to_be32(SBP2_BUSY_TIMEOUT_VALUE);
1251 if (hpsb_node_write(lu->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4))
1252 SBP2_ERR("%s error", __FUNCTION__);
1256 static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
1257 struct unit_directory *ud)
1259 struct csr1212_keyval *kv;
1260 struct csr1212_dentry *dentry;
1261 u64 management_agent_addr;
1262 u32 unit_characteristics, firmware_revision;
1263 unsigned workarounds;
1266 management_agent_addr = 0;
1267 unit_characteristics = 0;
1268 firmware_revision = 0;
1270 csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
1271 switch (kv->key.id) {
1272 case CSR1212_KV_ID_DEPENDENT_INFO:
1273 if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET)
1274 management_agent_addr =
1275 CSR1212_REGISTER_SPACE_BASE +
1276 (kv->value.csr_offset << 2);
1278 else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE)
1279 lu->lun = ORB_SET_LUN(kv->value.immediate);
1282 case SBP2_UNIT_CHARACTERISTICS_KEY:
1283 /* FIXME: This is ignored so far.
1284 * See SBP-2 clause 7.4.8. */
1285 unit_characteristics = kv->value.immediate;
1288 case SBP2_FIRMWARE_REVISION_KEY:
1289 firmware_revision = kv->value.immediate;
1293 /* FIXME: Check for SBP2_DEVICE_TYPE_AND_LUN_KEY.
1294 * Its "ordered" bit has consequences for command ORB
1295 * list handling. See SBP-2 clauses 4.6, 7.4.11, 10.2 */
1300 workarounds = sbp2_default_workarounds;
1302 if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
1303 for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
1304 if (sbp2_workarounds_table[i].firmware_revision !=
1305 SBP2_ROM_VALUE_WILDCARD &&
1306 sbp2_workarounds_table[i].firmware_revision !=
1307 (firmware_revision & 0xffff00))
1309 if (sbp2_workarounds_table[i].model_id !=
1310 SBP2_ROM_VALUE_WILDCARD &&
1311 sbp2_workarounds_table[i].model_id != ud->model_id)
1313 workarounds |= sbp2_workarounds_table[i].workarounds;
1318 SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
1319 "(firmware_revision 0x%06x, vendor_id 0x%06x,"
1320 " model_id 0x%06x)",
1321 NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
1322 workarounds, firmware_revision,
1323 ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
1326 /* We would need one SCSI host template for each target to adjust
1327 * max_sectors on the fly, therefore warn only. */
1328 if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
1329 (sbp2_max_sectors * 512) > (128 * 1024))
1330 SBP2_INFO("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
1331 "max transfer size. WARNING: Current max_sectors "
1332 "setting is larger than 128KB (%d sectors)",
1333 NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
1336 /* If this is a logical unit directory entry, process the parent
1337 * to get the values. */
1338 if (ud->flags & UNIT_DIRECTORY_LUN_DIRECTORY) {
1339 struct unit_directory *parent_ud = container_of(
1340 ud->device.parent, struct unit_directory, device);
1341 sbp2_parse_unit_directory(lu, parent_ud);
1343 lu->management_agent_addr = management_agent_addr;
1344 lu->workarounds = workarounds;
1345 if (ud->flags & UNIT_DIRECTORY_HAS_LUN)
1346 lu->lun = ORB_SET_LUN(ud->lun);
1350 #define SBP2_PAYLOAD_TO_BYTES(p) (1 << ((p) + 2))
1353 * This function is called in order to determine the max speed and packet
1354 * size we can use in our ORBs. Note, that we (the driver and host) only
1355 * initiate the transaction. The SBP-2 device actually transfers the data
1356 * (by reading from the DMA area we tell it). This means that the SBP-2
1357 * device decides the actual maximum data it can transfer. We just tell it
1358 * the speed that it needs to use, and the max_rec the host supports, and
1359 * it takes care of the rest.
1361 static int sbp2_max_speed_and_size(struct sbp2_lu *lu)
1363 struct sbp2_fwhost_info *hi = lu->hi;
1366 lu->speed_code = hi->host->speed[NODEID_TO_NODE(lu->ne->nodeid)];
1368 if (lu->speed_code > sbp2_max_speed) {
1369 lu->speed_code = sbp2_max_speed;
1370 SBP2_INFO("Reducing speed to %s",
1371 hpsb_speedto_str[sbp2_max_speed]);
1374 /* Payload size is the lesser of what our speed supports and what
1375 * our host supports. */
1376 payload = min(sbp2_speedto_max_payload[lu->speed_code],
1377 (u8) (hi->host->csr.max_rec - 1));
1379 /* If physical DMA is off, work around limitation in ohci1394:
1380 * packet size must not exceed PAGE_SIZE */
1381 if (lu->ne->host->low_addr_space < (1ULL << 32))
1382 while (SBP2_PAYLOAD_TO_BYTES(payload) + 24 > PAGE_SIZE &&
1386 SBP2_INFO("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]",
1387 NODE_BUS_ARGS(hi->host, lu->ne->nodeid),
1388 hpsb_speedto_str[lu->speed_code],
1389 SBP2_PAYLOAD_TO_BYTES(payload));
1391 lu->max_payload_size = payload;
1395 static int sbp2_agent_reset(struct sbp2_lu *lu, int wait)
1400 unsigned long flags;
1402 /* flush lu->protocol_work */
1404 flush_scheduled_work();
1406 data = ntohl(SBP2_AGENT_RESET_DATA);
1407 addr = lu->command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
1410 retval = hpsb_node_write(lu->ne, addr, &data, 4);
1412 retval = sbp2util_node_write_no_wait(lu->ne, addr, &data, 4);
1415 SBP2_ERR("hpsb_node_write failed.\n");
1419 /* make sure that the ORB_POINTER is written on next command */
1420 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
1421 lu->last_orb = NULL;
1422 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
1427 static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
1428 struct sbp2_fwhost_info *hi,
1429 struct sbp2_command_info *cmd,
1430 unsigned int scsi_use_sg,
1431 struct scatterlist *sgpnt,
1433 enum dma_data_direction dma_dir)
1435 cmd->dma_dir = dma_dir;
1436 orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
1437 orb->misc |= ORB_SET_DIRECTION(orb_direction);
1439 /* special case if only one element (and less than 64KB in size) */
1440 if ((scsi_use_sg == 1) &&
1441 (sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) {
1443 cmd->dma_size = sgpnt[0].length;
1444 cmd->dma_type = CMD_DMA_PAGE;
1445 cmd->cmd_dma = dma_map_page(hi->host->device.parent,
1446 sgpnt[0].page, sgpnt[0].offset,
1447 cmd->dma_size, cmd->dma_dir);
1449 orb->data_descriptor_lo = cmd->cmd_dma;
1450 orb->misc |= ORB_SET_DATA_SIZE(cmd->dma_size);
1453 struct sbp2_unrestricted_page_table *sg_element =
1454 &cmd->scatter_gather_element[0];
1455 u32 sg_count, sg_len;
1457 int i, count = dma_map_sg(hi->host->device.parent, sgpnt,
1458 scsi_use_sg, dma_dir);
1460 cmd->dma_size = scsi_use_sg;
1461 cmd->sge_buffer = sgpnt;
1463 /* use page tables (s/g) */
1464 orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
1465 orb->data_descriptor_lo = cmd->sge_dma;
1467 /* loop through and fill out our SBP-2 page tables
1468 * (and split up anything too large) */
1469 for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) {
1470 sg_len = sg_dma_len(sgpnt);
1471 sg_addr = sg_dma_address(sgpnt);
1473 sg_element[sg_count].segment_base_lo = sg_addr;
1474 if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) {
1475 sg_element[sg_count].length_segment_base_hi =
1476 PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH);
1477 sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH;
1478 sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH;
1480 sg_element[sg_count].length_segment_base_hi =
1481 PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len);
1488 orb->misc |= ORB_SET_DATA_SIZE(sg_count);
1490 sbp2util_cpu_to_be32_buffer(sg_element,
1491 (sizeof(struct sbp2_unrestricted_page_table)) *
1496 static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb,
1497 struct sbp2_fwhost_info *hi,
1498 struct sbp2_command_info *cmd,
1499 struct scatterlist *sgpnt,
1501 unsigned int scsi_request_bufflen,
1502 void *scsi_request_buffer,
1503 enum dma_data_direction dma_dir)
1505 cmd->dma_dir = dma_dir;
1506 cmd->dma_size = scsi_request_bufflen;
1507 cmd->dma_type = CMD_DMA_SINGLE;
1508 cmd->cmd_dma = dma_map_single(hi->host->device.parent,
1509 scsi_request_buffer,
1510 cmd->dma_size, cmd->dma_dir);
1511 orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
1512 orb->misc |= ORB_SET_DIRECTION(orb_direction);
1514 /* handle case where we get a command w/o s/g enabled
1515 * (but check for transfers larger than 64K) */
1516 if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) {
1518 orb->data_descriptor_lo = cmd->cmd_dma;
1519 orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen);
1522 /* The buffer is too large. Turn this into page tables. */
1524 struct sbp2_unrestricted_page_table *sg_element =
1525 &cmd->scatter_gather_element[0];
1526 u32 sg_count, sg_len;
1529 orb->data_descriptor_lo = cmd->sge_dma;
1530 orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
1532 /* fill out our SBP-2 page tables; split up the large buffer */
1534 sg_len = scsi_request_bufflen;
1535 sg_addr = cmd->cmd_dma;
1537 sg_element[sg_count].segment_base_lo = sg_addr;
1538 if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) {
1539 sg_element[sg_count].length_segment_base_hi =
1540 PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH);
1541 sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH;
1542 sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH;
1544 sg_element[sg_count].length_segment_base_hi =
1545 PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len);
1551 orb->misc |= ORB_SET_DATA_SIZE(sg_count);
1553 sbp2util_cpu_to_be32_buffer(sg_element,
1554 (sizeof(struct sbp2_unrestricted_page_table)) *
1559 static void sbp2_create_command_orb(struct sbp2_lu *lu,
1560 struct sbp2_command_info *cmd,
1562 unsigned int scsi_use_sg,
1563 unsigned int scsi_request_bufflen,
1564 void *scsi_request_buffer,
1565 enum dma_data_direction dma_dir)
1567 struct sbp2_fwhost_info *hi = lu->hi;
1568 struct scatterlist *sgpnt = (struct scatterlist *)scsi_request_buffer;
1569 struct sbp2_command_orb *orb = &cmd->command_orb;
1573 * Set-up our command ORB.
1575 * NOTE: We're doing unrestricted page tables (s/g), as this is
1576 * best performance (at least with the devices I have). This means
1577 * that data_size becomes the number of s/g elements, and
1578 * page_size should be zero (for unrestricted).
1580 orb->next_ORB_hi = ORB_SET_NULL_PTR(1);
1581 orb->next_ORB_lo = 0x0;
1582 orb->misc = ORB_SET_MAX_PAYLOAD(lu->max_payload_size);
1583 orb->misc |= ORB_SET_SPEED(lu->speed_code);
1584 orb->misc |= ORB_SET_NOTIFY(1);
1586 if (dma_dir == DMA_NONE)
1587 orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
1588 else if (dma_dir == DMA_TO_DEVICE && scsi_request_bufflen)
1589 orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA;
1590 else if (dma_dir == DMA_FROM_DEVICE && scsi_request_bufflen)
1591 orb_direction = ORB_DIRECTION_READ_FROM_MEDIA;
1593 SBP2_INFO("Falling back to DMA_NONE");
1594 orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
1597 /* set up our page table stuff */
1598 if (orb_direction == ORB_DIRECTION_NO_DATA_TRANSFER) {
1599 orb->data_descriptor_hi = 0x0;
1600 orb->data_descriptor_lo = 0x0;
1601 orb->misc |= ORB_SET_DIRECTION(1);
1602 } else if (scsi_use_sg)
1603 sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sgpnt,
1604 orb_direction, dma_dir);
1606 sbp2_prep_command_orb_no_sg(orb, hi, cmd, sgpnt, orb_direction,
1607 scsi_request_bufflen,
1608 scsi_request_buffer, dma_dir);
1610 sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb));
1612 memset(orb->cdb, 0, 12);
1613 memcpy(orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
1616 static void sbp2_link_orb_command(struct sbp2_lu *lu,
1617 struct sbp2_command_info *cmd)
1619 struct sbp2_fwhost_info *hi = lu->hi;
1620 struct sbp2_command_orb *last_orb;
1621 dma_addr_t last_orb_dma;
1622 u64 addr = lu->command_block_agent_addr;
1625 unsigned long flags;
1627 dma_sync_single_for_device(hi->host->device.parent,
1628 cmd->command_orb_dma,
1629 sizeof(struct sbp2_command_orb),
1631 dma_sync_single_for_device(hi->host->device.parent, cmd->sge_dma,
1632 sizeof(cmd->scatter_gather_element),
1635 /* check to see if there are any previous orbs to use */
1636 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
1637 last_orb = lu->last_orb;
1638 last_orb_dma = lu->last_orb_dma;
1641 * last_orb == NULL means: We know that the target's fetch agent
1642 * is not active right now.
1644 addr += SBP2_ORB_POINTER_OFFSET;
1645 data[0] = ORB_SET_NODE_ID(hi->host->node_id);
1646 data[1] = cmd->command_orb_dma;
1647 sbp2util_cpu_to_be32_buffer(data, 8);
1651 * last_orb != NULL means: We know that the target's fetch agent
1652 * is (very probably) not dead or in reset state right now.
1653 * We have an ORB already sent that we can append a new one to.
1654 * The target's fetch agent may or may not have read this
1657 dma_sync_single_for_cpu(hi->host->device.parent, last_orb_dma,
1658 sizeof(struct sbp2_command_orb),
1660 last_orb->next_ORB_lo = cpu_to_be32(cmd->command_orb_dma);
1662 /* Tells hardware that this pointer is valid */
1663 last_orb->next_ORB_hi = 0;
1664 dma_sync_single_for_device(hi->host->device.parent,
1666 sizeof(struct sbp2_command_orb),
1668 addr += SBP2_DOORBELL_OFFSET;
1672 lu->last_orb = &cmd->command_orb;
1673 lu->last_orb_dma = cmd->command_orb_dma;
1674 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
1676 if (sbp2util_node_write_no_wait(lu->ne, addr, data, length)) {
1678 * sbp2util_node_write_no_wait failed. We certainly ran out
1679 * of transaction labels, perhaps just because there were no
1680 * context switches which gave khpsbpkt a chance to collect
1681 * free tlabels. Try again in non-atomic context. If necessary,
1682 * the workqueue job will sleep to guaranteedly get a tlabel.
1683 * We do not accept new commands until the job is over.
1685 scsi_block_requests(lu->shost);
1686 PREPARE_WORK(&lu->protocol_work,
1687 last_orb ? sbp2util_write_doorbell:
1688 sbp2util_write_orb_pointer);
1689 schedule_work(&lu->protocol_work);
1693 static int sbp2_send_command(struct sbp2_lu *lu, struct scsi_cmnd *SCpnt,
1694 void (*done)(struct scsi_cmnd *))
1696 unchar *scsi_cmd = (unchar *)SCpnt->cmnd;
1697 unsigned int request_bufflen = SCpnt->request_bufflen;
1698 struct sbp2_command_info *cmd;
1700 cmd = sbp2util_allocate_command_orb(lu, SCpnt, done);
1704 sbp2_create_command_orb(lu, cmd, scsi_cmd, SCpnt->use_sg,
1705 request_bufflen, SCpnt->request_buffer,
1706 SCpnt->sc_data_direction);
1707 sbp2_link_orb_command(lu, cmd);
1713 * Translates SBP-2 status into SCSI sense data for check conditions
1715 static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
1718 /* OK, it's pretty ugly... ;-) */
1719 sense_data[0] = 0x70;
1720 sense_data[1] = 0x0;
1721 sense_data[2] = sbp2_status[9];
1722 sense_data[3] = sbp2_status[12];
1723 sense_data[4] = sbp2_status[13];
1724 sense_data[5] = sbp2_status[14];
1725 sense_data[6] = sbp2_status[15];
1727 sense_data[8] = sbp2_status[16];
1728 sense_data[9] = sbp2_status[17];
1729 sense_data[10] = sbp2_status[18];
1730 sense_data[11] = sbp2_status[19];
1731 sense_data[12] = sbp2_status[10];
1732 sense_data[13] = sbp2_status[11];
1733 sense_data[14] = sbp2_status[20];
1734 sense_data[15] = sbp2_status[21];
1736 return sbp2_status[8] & 0x3f;
1739 static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
1740 int destid, quadlet_t *data, u64 addr,
1741 size_t length, u16 fl)
1743 struct sbp2_fwhost_info *hi;
1744 struct sbp2_lu *lu = NULL, *lu_tmp;
1745 struct scsi_cmnd *SCpnt = NULL;
1746 struct sbp2_status_block *sb;
1747 u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
1748 struct sbp2_command_info *cmd;
1749 unsigned long flags;
1751 if (unlikely(length < 8 || length > sizeof(struct sbp2_status_block))) {
1752 SBP2_ERR("Wrong size of status block");
1753 return RCODE_ADDRESS_ERROR;
1755 if (unlikely(!host)) {
1756 SBP2_ERR("host is NULL - this is bad!");
1757 return RCODE_ADDRESS_ERROR;
1759 hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
1760 if (unlikely(!hi)) {
1761 SBP2_ERR("host info is NULL - this is bad!");
1762 return RCODE_ADDRESS_ERROR;
1765 /* Find the unit which wrote the status. */
1766 list_for_each_entry(lu_tmp, &hi->logical_units, lu_list) {
1767 if (lu_tmp->ne->nodeid == nodeid &&
1768 lu_tmp->status_fifo_addr == addr) {
1773 if (unlikely(!lu)) {
1774 SBP2_ERR("lu is NULL - device is gone?");
1775 return RCODE_ADDRESS_ERROR;
1778 /* Put response into lu status fifo buffer. The first two bytes
1779 * come in big endian bit order. Often the target writes only a
1780 * truncated status block, minimally the first two quadlets. The rest
1781 * is implied to be zeros. */
1782 sb = &lu->status_block;
1783 memset(sb->command_set_dependent, 0, sizeof(sb->command_set_dependent));
1784 memcpy(sb, data, length);
1785 sbp2util_be32_to_cpu_buffer(sb, 8);
1787 /* Ignore unsolicited status. Handle command ORB status. */
1788 if (unlikely(STATUS_GET_SRC(sb->ORB_offset_hi_misc) == 2))
1791 cmd = sbp2util_find_command_for_orb(lu, sb->ORB_offset_lo);
1793 dma_sync_single_for_cpu(hi->host->device.parent,
1794 cmd->command_orb_dma,
1795 sizeof(struct sbp2_command_orb),
1797 dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma,
1798 sizeof(cmd->scatter_gather_element),
1800 /* Grab SCSI command pointers and check status. */
1802 * FIXME: If the src field in the status is 1, the ORB DMA must
1803 * not be reused until status for a subsequent ORB is received.
1805 SCpnt = cmd->Current_SCpnt;
1806 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
1807 sbp2util_mark_command_completed(lu, cmd);
1808 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
1811 u32 h = sb->ORB_offset_hi_misc;
1812 u32 r = STATUS_GET_RESP(h);
1814 if (r != RESP_STATUS_REQUEST_COMPLETE) {
1815 SBP2_INFO("resp 0x%x, sbp_status 0x%x",
1816 r, STATUS_GET_SBP_STATUS(h));
1818 r == RESP_STATUS_TRANSPORT_FAILURE ?
1819 SBP2_SCSI_STATUS_BUSY :
1820 SBP2_SCSI_STATUS_COMMAND_TERMINATED;
1823 if (STATUS_GET_LEN(h) > 1)
1824 scsi_status = sbp2_status_to_sense_data(
1825 (unchar *)sb, SCpnt->sense_buffer);
1827 if (STATUS_TEST_DEAD(h))
1828 sbp2_agent_reset(lu, 0);
1831 /* Check here to see if there are no commands in-use. If there
1832 * are none, we know that the fetch agent left the active state
1833 * _and_ that we did not reactivate it yet. Therefore clear
1834 * last_orb so that next time we write directly to the
1835 * ORB_POINTER register. That way the fetch agent does not need
1836 * to refetch the next_ORB. */
1837 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
1838 if (list_empty(&lu->cmd_orb_inuse))
1839 lu->last_orb = NULL;
1840 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
1843 /* It's probably status after a management request. */
1844 if ((sb->ORB_offset_lo == lu->reconnect_orb_dma) ||
1845 (sb->ORB_offset_lo == lu->login_orb_dma) ||
1846 (sb->ORB_offset_lo == lu->query_logins_orb_dma) ||
1847 (sb->ORB_offset_lo == lu->logout_orb_dma)) {
1848 lu->access_complete = 1;
1849 wake_up_interruptible(&sbp2_access_wq);
1854 sbp2scsi_complete_command(lu, scsi_status, SCpnt,
1856 return RCODE_COMPLETE;
1859 /**************************************
1860 * SCSI interface related section
1861 **************************************/
1863 static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
1864 void (*done)(struct scsi_cmnd *))
1866 struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0];
1867 struct sbp2_fwhost_info *hi;
1868 int result = DID_NO_CONNECT << 16;
1870 if (unlikely(!sbp2util_node_is_available(lu)))
1875 if (unlikely(!hi)) {
1876 SBP2_ERR("sbp2_fwhost_info is NULL - this is bad!");
1880 /* Multiple units are currently represented to the SCSI core as separate
1881 * targets, not as one target with multiple LUs. Therefore return
1882 * selection time-out to any IO directed at non-zero LUNs. */
1883 if (unlikely(SCpnt->device->lun))
1886 if (unlikely(!hpsb_node_entry_valid(lu->ne))) {
1887 SBP2_ERR("Bus reset in progress - rejecting command");
1888 result = DID_BUS_BUSY << 16;
1892 /* Bidirectional commands are not yet implemented,
1893 * and unknown transfer direction not handled. */
1894 if (unlikely(SCpnt->sc_data_direction == DMA_BIDIRECTIONAL)) {
1895 SBP2_ERR("Cannot handle DMA_BIDIRECTIONAL - rejecting command");
1896 result = DID_ERROR << 16;
1900 if (sbp2_send_command(lu, SCpnt, done)) {
1901 SBP2_ERR("Error sending SCSI command");
1902 sbp2scsi_complete_command(lu,
1903 SBP2_SCSI_STATUS_SELECTION_TIMEOUT,
1909 SCpnt->result = result;
1914 static void sbp2scsi_complete_all_commands(struct sbp2_lu *lu, u32 status)
1916 struct sbp2_fwhost_info *hi = lu->hi;
1917 struct list_head *lh;
1918 struct sbp2_command_info *cmd;
1919 unsigned long flags;
1921 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
1922 while (!list_empty(&lu->cmd_orb_inuse)) {
1923 lh = lu->cmd_orb_inuse.next;
1924 cmd = list_entry(lh, struct sbp2_command_info, list);
1925 dma_sync_single_for_cpu(hi->host->device.parent,
1926 cmd->command_orb_dma,
1927 sizeof(struct sbp2_command_orb),
1929 dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma,
1930 sizeof(cmd->scatter_gather_element),
1932 sbp2util_mark_command_completed(lu, cmd);
1933 if (cmd->Current_SCpnt) {
1934 cmd->Current_SCpnt->result = status << 16;
1935 cmd->Current_done(cmd->Current_SCpnt);
1938 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
1944 * Complete a regular SCSI command. Can be called in atomic context.
1946 static void sbp2scsi_complete_command(struct sbp2_lu *lu, u32 scsi_status,
1947 struct scsi_cmnd *SCpnt,
1948 void (*done)(struct scsi_cmnd *))
1951 SBP2_ERR("SCpnt is NULL");
1955 switch (scsi_status) {
1956 case SBP2_SCSI_STATUS_GOOD:
1957 SCpnt->result = DID_OK << 16;
1960 case SBP2_SCSI_STATUS_BUSY:
1961 SBP2_ERR("SBP2_SCSI_STATUS_BUSY");
1962 SCpnt->result = DID_BUS_BUSY << 16;
1965 case SBP2_SCSI_STATUS_CHECK_CONDITION:
1966 SCpnt->result = CHECK_CONDITION << 1 | DID_OK << 16;
1969 case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
1970 SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT");
1971 SCpnt->result = DID_NO_CONNECT << 16;
1972 scsi_print_command(SCpnt);
1975 case SBP2_SCSI_STATUS_CONDITION_MET:
1976 case SBP2_SCSI_STATUS_RESERVATION_CONFLICT:
1977 case SBP2_SCSI_STATUS_COMMAND_TERMINATED:
1978 SBP2_ERR("Bad SCSI status = %x", scsi_status);
1979 SCpnt->result = DID_ERROR << 16;
1980 scsi_print_command(SCpnt);
1984 SBP2_ERR("Unsupported SCSI status = %x", scsi_status);
1985 SCpnt->result = DID_ERROR << 16;
1988 /* If a bus reset is in progress and there was an error, complete
1989 * the command as busy so that it will get retried. */
1990 if (!hpsb_node_entry_valid(lu->ne)
1991 && (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
1992 SBP2_ERR("Completing command with busy (bus reset)");
1993 SCpnt->result = DID_BUS_BUSY << 16;
1996 /* Tell the SCSI stack that we're done with this command. */
2000 static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
2002 struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
2005 sdev->allow_restart = 1;
2007 if (lu->workarounds & SBP2_WORKAROUND_INQUIRY_36)
2008 sdev->inquiry_len = 36;
2012 static int sbp2scsi_slave_configure(struct scsi_device *sdev)
2014 struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
2016 blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
2017 sdev->use_10_for_rw = 1;
2019 if (sdev->type == TYPE_ROM)
2020 sdev->use_10_for_ms = 1;
2021 if (sdev->type == TYPE_DISK &&
2022 lu->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
2023 sdev->skip_ms_page_8 = 1;
2024 if (lu->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
2025 sdev->fix_capacity = 1;
2029 static void sbp2scsi_slave_destroy(struct scsi_device *sdev)
2031 ((struct sbp2_lu *)sdev->host->hostdata[0])->sdev = NULL;
2036 * Called by scsi stack when something has really gone wrong.
2037 * Usually called when a command has timed-out for some reason.
2039 static int sbp2scsi_abort(struct scsi_cmnd *SCpnt)
2041 struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0];
2042 struct sbp2_fwhost_info *hi = lu->hi;
2043 struct sbp2_command_info *cmd;
2044 unsigned long flags;
2046 SBP2_INFO("aborting sbp2 command");
2047 scsi_print_command(SCpnt);
2049 if (sbp2util_node_is_available(lu)) {
2050 sbp2_agent_reset(lu, 1);
2052 /* Return a matching command structure to the free pool. */
2053 spin_lock_irqsave(&lu->cmd_orb_lock, flags);
2054 cmd = sbp2util_find_command_for_SCpnt(lu, SCpnt);
2056 dma_sync_single_for_cpu(hi->host->device.parent,
2057 cmd->command_orb_dma,
2058 sizeof(struct sbp2_command_orb),
2060 dma_sync_single_for_cpu(hi->host->device.parent,
2062 sizeof(cmd->scatter_gather_element),
2064 sbp2util_mark_command_completed(lu, cmd);
2065 if (cmd->Current_SCpnt) {
2066 cmd->Current_SCpnt->result = DID_ABORT << 16;
2067 cmd->Current_done(cmd->Current_SCpnt);
2070 spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
2072 sbp2scsi_complete_all_commands(lu, DID_BUS_BUSY);
2079 * Called by scsi stack when something has really gone wrong.
2081 static int sbp2scsi_reset(struct scsi_cmnd *SCpnt)
2083 struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0];
2085 SBP2_INFO("reset requested");
2087 if (sbp2util_node_is_available(lu)) {
2088 SBP2_INFO("generating sbp2 fetch agent reset");
2089 sbp2_agent_reset(lu, 1);
2095 static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev,
2096 struct device_attribute *attr,
2099 struct scsi_device *sdev;
2102 if (!(sdev = to_scsi_device(dev)))
2105 if (!(lu = (struct sbp2_lu *)sdev->host->hostdata[0]))
2108 return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)lu->ne->guid,
2109 lu->ud->id, ORB_SET_LUN(lu->lun));
2112 MODULE_AUTHOR("Ben Collins <bcollins@debian.org>");
2113 MODULE_DESCRIPTION("IEEE-1394 SBP-2 protocol driver");
2114 MODULE_SUPPORTED_DEVICE(SBP2_DEVICE_NAME);
2115 MODULE_LICENSE("GPL");
2117 static int sbp2_module_init(void)
2121 if (sbp2_serialize_io) {
2122 sbp2_shost_template.can_queue = 1;
2123 sbp2_shost_template.cmd_per_lun = 1;
2126 if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
2127 (sbp2_max_sectors * 512) > (128 * 1024))
2128 sbp2_max_sectors = 128 * 1024 / 512;
2129 sbp2_shost_template.max_sectors = sbp2_max_sectors;
2131 hpsb_register_highlevel(&sbp2_highlevel);
2132 ret = hpsb_register_protocol(&sbp2_driver);
2134 SBP2_ERR("Failed to register protocol");
2135 hpsb_unregister_highlevel(&sbp2_highlevel);
2141 static void __exit sbp2_module_exit(void)
2143 hpsb_unregister_protocol(&sbp2_driver);
2144 hpsb_unregister_highlevel(&sbp2_highlevel);
2147 module_init(sbp2_module_init);
2148 module_exit(sbp2_module_exit);