w1: fix omap 1-wire driver compilation
[safe/jmp/linux-2.6] / drivers / ide / q40ide.c
1 /*
2  *  Q40 I/O port IDE Driver
3  *
4  *     (c) Richard Zidlicky
5  *
6  *  This file is subject to the terms and conditions of the GNU General Public
7  *  License.  See the file COPYING in the main directory of this archive for
8  *  more details.
9  *
10  *
11  */
12
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/interrupt.h>
16 #include <linux/blkdev.h>
17 #include <linux/ide.h>
18
19 #include <asm/ide.h>
20
21     /*
22      *  Bases of the IDE interfaces
23      */
24
25 #define Q40IDE_NUM_HWIFS        2
26
27 #define PCIDE_BASE1     0x1f0
28 #define PCIDE_BASE2     0x170
29 #define PCIDE_BASE3     0x1e8
30 #define PCIDE_BASE4     0x168
31 #define PCIDE_BASE5     0x1e0
32 #define PCIDE_BASE6     0x160
33
34 static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
35     PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4  , PCIDE_BASE5,
36     PCIDE_BASE6 */
37 };
38
39 static int q40ide_default_irq(unsigned long base)
40 {
41            switch (base) {
42                     case 0x1f0: return 14;
43                     case 0x170: return 15;
44                     case 0x1e8: return 11;
45                     default:
46                         return 0;
47            }
48 }
49
50
51 /*
52  * Addresses are pretranslated for Q40 ISA access.
53  */
54 static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
55 {
56         memset(hw, 0, sizeof(*hw));
57         /* BIG FAT WARNING: 
58            assumption: only DATA port is ever used in 16 bit mode */
59         hw->io_ports.data_addr = Q40_ISA_IO_W(base);
60         hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
61         hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
62         hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
63         hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
64         hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
65         hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
66         hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
67         hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
68
69         hw->irq = irq;
70 }
71
72 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
73                               void *buf, unsigned int len)
74 {
75         unsigned long data_addr = drive->hwif->io_ports.data_addr;
76
77         if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
78                 __ide_mm_insw(data_addr, buf, (len + 1) / 2);
79                 return;
80         }
81
82         raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
83 }
84
85 static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
86                                void *buf, unsigned int len)
87 {
88         unsigned long data_addr = drive->hwif->io_ports.data_addr;
89
90         if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
91                 __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
92                 return;
93         }
94
95         raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
96 }
97
98 /* Q40 has a byte-swapped IDE interface */
99 static const struct ide_tp_ops q40ide_tp_ops = {
100         .exec_command           = ide_exec_command,
101         .read_status            = ide_read_status,
102         .read_altstatus         = ide_read_altstatus,
103         .write_devctl           = ide_write_devctl,
104
105         .dev_select             = ide_dev_select,
106         .tf_load                = ide_tf_load,
107         .tf_read                = ide_tf_read,
108
109         .input_data             = q40ide_input_data,
110         .output_data            = q40ide_output_data,
111 };
112
113 static const struct ide_port_info q40ide_port_info = {
114         .tp_ops                 = &q40ide_tp_ops,
115         .host_flags             = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
116         .irq_flags              = IRQF_SHARED,
117         .chipset                = ide_generic,
118 };
119
120 /* 
121  * the static array is needed to have the name reported in /proc/ioports,
122  * hwif->name unfortunately isn't available yet
123  */
124 static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
125         "ide0", "ide1"
126 };
127
128 /*
129  *  Probe for Q40 IDE interfaces
130  */
131
132 static int __init q40ide_init(void)
133 {
134     int i;
135     struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
136
137     if (!MACH_IS_Q40)
138       return -ENODEV;
139
140     printk(KERN_INFO "ide: Q40 IDE controller\n");
141
142     for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
143         const char *name = q40_ide_names[i];
144
145         if (!request_region(pcide_bases[i], 8, name)) {
146                 printk("could not reserve ports %lx-%lx for %s\n",
147                        pcide_bases[i],pcide_bases[i]+8,name);
148                 continue;
149         }
150         if (!request_region(pcide_bases[i]+0x206, 1, name)) {
151                 printk("could not reserve port %lx for %s\n",
152                        pcide_bases[i]+0x206,name);
153                 release_region(pcide_bases[i], 8);
154                 continue;
155         }
156         q40_ide_setup_ports(&hw[i], pcide_bases[i],
157                         q40ide_default_irq(pcide_bases[i]));
158
159         hws[i] = &hw[i];
160     }
161
162     return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
163 }
164
165 module_init(q40ide_init);
166
167 MODULE_LICENSE("GPL");