SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/ide/ide.c

   1 /*
   2  *  linux/drivers/ide/ide.c             Version 7.00beta2       Mar 05 2003
   3  *
   4  *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below)
   5  */
   6
   7 /*
   8  *  Mostly written by Mark Lord  <mlord@pobox.com>
   9  *                and Gadi Oxman <gadio@netvision.net.il>
  10  *                and Andre Hedrick <andre@linux-ide.org>
  11  *
  12  *  See linux/MAINTAINERS for address of current maintainer.
  13  *
  14  * This is the multiple IDE interface driver, as evolved from hd.c.
  15  * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
  16  *   (usually 14 & 15).
  17  * There can be up to two drives per interface, as per the ATA-2 spec.
  18  *
  19  * Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
  20  * Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
  21  * Tertiary:   ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
  22  * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
  23  * ...
  24  *
  25  *  From hd.c:
  26  *  |
  27  *  | It traverses the request-list, using interrupts to jump between functions.
  28  *  | As nearly all functions can be called within interrupts, we may not sleep.
  29  *  | Special care is recommended.  Have Fun!
  30  *  |
  31  *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
  32  *  |
  33  *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
  34  *  | in the early extended-partition checks and added DM partitions.
  35  *  |
  36  *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
  37  *  |
  38  *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
  39  *  | and general streamlining by Mark Lord (mlord@pobox.com).
  40  *
  41  *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
  42  *
  43  *      Mark Lord       (mlord@pobox.com)               (IDE Perf.Pkg)
  44  *      Delman Lee      (delman@ieee.org)               ("Mr. atdisk2")
  45  *      Scott Snyder    (snyder@fnald0.fnal.gov)        (ATAPI IDE cd-rom)
  46  *
  47  *  This was a rewrite of just about everything from hd.c, though some original
  48  *  code is still sprinkled about.  Think of it as a major evolution, with
  49  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
  50  *
  51  *  Version 1.0 ALPHA   initial code, primary i/f working okay
  52  *  Version 1.3 BETA    dual i/f on shared irq tested & working!
  53  *  Version 1.4 BETA    added auto probing for irq(s)
  54  *  Version 1.5 BETA    added ALPHA (untested) support for IDE cd-roms,
  55  *  ...
  56  * Version 5.50         allow values as small as 20 for idebus=
  57  * Version 5.51         force non io_32bit in drive_cmd_intr()
  58  *                      change delay_10ms() to delay_50ms() to fix problems
  59  * Version 5.52         fix incorrect invalidation of removable devices
  60  *                      add "hdx=slow" command line option
  61  * Version 5.60         start to modularize the driver; the disk and ATAPI
  62  *                       drivers can be compiled as loadable modules.
  63  *                      move IDE probe code to ide-probe.c
  64  *                      move IDE disk code to ide-disk.c
  65  *                      add support for generic IDE device subdrivers
  66  *                      add m68k code from Geert Uytterhoeven
  67  *                      probe all interfaces by default
  68  *                      add ioctl to (re)probe an interface
  69  * Version 6.00         use per device request queues
  70  *                      attempt to optimize shared hwgroup performance
  71  *                      add ioctl to manually adjust bandwidth algorithms
  72  *                      add kerneld support for the probe module
  73  *                      fix bug in ide_error()
  74  *                      fix bug in the first ide_get_lock() call for Atari
  75  *                      don't flush leftover data for ATAPI devices
  76  * Version 6.01         clear hwgroup->active while the hwgroup sleeps
  77  *                      support HDIO_GETGEO for floppies
  78  * Version 6.02         fix ide_ack_intr() call
  79  *                      check partition table on floppies
  80  * Version 6.03         handle bad status bit sequencing in ide_wait_stat()
  81  * Version 6.10         deleted old entries from this list of updates
  82  *                      replaced triton.c with ide-dma.c generic PCI DMA
  83  *                      added support for BIOS-enabled UltraDMA
  84  *                      rename all "promise" things to "pdc4030"
  85  *                      fix EZ-DRIVE handling on small disks
  86  * Version 6.11         fix probe error in ide_scan_devices()
  87  *                      fix ancient "jiffies" polling bugs
  88  *                      mask all hwgroup interrupts on each irq entry
  89  * Version 6.12         integrate ioctl and proc interfaces
  90  *                      fix parsing of "idex=" command line parameter
  91  * Version 6.13         add support for ide4/ide5 courtesy rjones@orchestream.com
  92  * Version 6.14         fixed IRQ sharing among PCI devices
  93  * Version 6.15         added SMP awareness to IDE drivers
  94  * Version 6.16         fixed various bugs; even more SMP friendly
  95  * Version 6.17         fix for newest EZ-Drive problem
  96  * Version 6.18         default unpartitioned-disk translation now "BIOS LBA"
  97  * Version 6.19         Re-design for a UNIFORM driver for all platforms,
  98  *                        model based on suggestions from Russell King and
  99  *                        Geert Uytterhoeven
 100  *                      Promise DC4030VL now supported.
 101  *                      add support for ide6/ide7
 102  *                      delay_50ms() changed to ide_delay_50ms() and exported.
 103  * Version 6.20         Added/Fixed Generic ATA-66 support and hwif detection.
 104  *                      Added hdx=flash to allow for second flash disk
 105  *                        detection w/o the hang loop.
 106  *                      Added support for ide8/ide9
 107  *                      Added idex=ata66 for the quirky chipsets that are
 108  *                        ATA-66 compliant, but have yet to determine a method
 109  *                        of verification of the 80c cable presence.
 110  *                        Specifically Promise's PDC20262 chipset.
 111  * Version 6.21         Fixing/Fixed SMP spinlock issue with insight from an old
 112  *                        hat that clarified original low level driver design.
 113  * Version 6.30         Added SMP support; fixed multmode issues.  -ml
 114  * Version 6.31         Debug Share INTR's and request queue streaming
 115  *                      Native ATA-100 support
 116  *                      Prep for Cascades Project
 117  * Version 7.00alpha    First named revision of ide rearrange
 118  *
 119  *  Some additional driver compile-time options are in ./include/linux/ide.h
 120  *
 121  *  To do, in likely order of completion:
 122  *      - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
 123  *
 124  */
 125
 126 #define REVISION        "Revision: 7.00alpha2"
 127 #define VERSION         "Id: ide.c 7.00a2 20020906"
 128
 129 #define _IDE_C                  /* Tell ide.h it's really us */
 130
 131 #include <linux/module.h>
 132 #include <linux/types.h>
 133 #include <linux/string.h>
 134 #include <linux/kernel.h>
 135 #include <linux/timer.h>
 136 #include <linux/mm.h>
 137 #include <linux/interrupt.h>
 138 #include <linux/major.h>
 139 #include <linux/errno.h>
 140 #include <linux/genhd.h>
 141 #include <linux/blkpg.h>
 142 #include <linux/slab.h>
 143 #include <linux/init.h>
 144 #include <linux/pci.h>
 145 #include <linux/delay.h>
 146 #include <linux/ide.h>
 147 #include <linux/completion.h>
 148 #include <linux/reboot.h>
 149 #include <linux/cdrom.h>
 150 #include <linux/seq_file.h>
 151 #include <linux/device.h>
 152 #include <linux/bitops.h>
 153
 154 #include <asm/byteorder.h>
 155 #include <asm/irq.h>
 156 #include <asm/uaccess.h>
 157 #include <asm/io.h>
 158
 159
 160 /* default maximum number of failures */
 161 #define IDE_DEFAULT_MAX_FAILURES        1
 162
 163 static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
 164                                         IDE2_MAJOR, IDE3_MAJOR,
 165                                         IDE4_MAJOR, IDE5_MAJOR,
 166                                         IDE6_MAJOR, IDE7_MAJOR,
 167                                         IDE8_MAJOR, IDE9_MAJOR };
 168
 169 static int idebus_parameter;    /* holds the "idebus=" parameter */
 170 static int system_bus_speed;    /* holds what we think is VESA/PCI bus speed */
 171
 172 DEFINE_MUTEX(ide_cfg_mtx);
 173  __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
 174
 175 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
 176 static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
 177 #endif
 178
 179 int noautodma = 0;
 180
 181 EXPORT_SYMBOL(noautodma);
 182
 183 #ifdef CONFIG_BLK_DEV_IDEACPI
 184 int ide_noacpi = 0;
 185 int ide_noacpitfs = 1;
 186 int ide_noacpionboot = 1;
 187 #endif
 188
 189 /*
 190  * This is declared extern in ide.h, for access by other IDE modules:
 191  */
 192 ide_hwif_t ide_hwifs[MAX_HWIFS];        /* master data repository */
 193
 194 EXPORT_SYMBOL(ide_hwifs);
 195
 196 /*
 197  * Do not even *think* about calling this!
 198  */
 199 static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
 200 {
 201         unsigned int unit;
 202
 203         /* bulk initialize hwif & drive info with zeros */
 204         memset(hwif, 0, sizeof(ide_hwif_t));
 205
 206         /* fill in any non-zero initial values */
 207         hwif->index     = index;
 208         hwif->major     = ide_hwif_to_major[index];
 209
 210         hwif->name[0]   = 'i';
 211         hwif->name[1]   = 'd';
 212         hwif->name[2]   = 'e';
 213         hwif->name[3]   = '0' + index;
 214
 215         hwif->bus_state = BUSSTATE_ON;
 216
 217         hwif->atapi_dma = 0;            /* disable all atapi dma */
 218
 219         init_completion(&hwif->gendev_rel_comp);
 220
 221         default_hwif_iops(hwif);
 222         default_hwif_transport(hwif);
 223         for (unit = 0; unit < MAX_DRIVES; ++unit) {
 224                 ide_drive_t *drive = &hwif->drives[unit];
 225
 226                 drive->media                    = ide_disk;
 227                 drive->select.all               = (unit<<4)|0xa0;
 228                 drive->hwif                     = hwif;
 229                 drive->ctl                      = 0x08;
 230                 drive->ready_stat               = READY_STAT;
 231                 drive->bad_wstat                = BAD_W_STAT;
 232                 drive->special.b.recalibrate    = 1;
 233                 drive->special.b.set_geometry   = 1;
 234                 drive->name[0]                  = 'h';
 235                 drive->name[1]                  = 'd';
 236                 drive->name[2]                  = 'a' + (index * MAX_DRIVES) + unit;
 237                 drive->max_failures             = IDE_DEFAULT_MAX_FAILURES;
 238                 drive->using_dma                = 0;
 239                 drive->vdma                     = 0;
 240                 INIT_LIST_HEAD(&drive->list);
 241                 init_completion(&drive->gendev_rel_comp);
 242         }
 243 }
 244
 245 static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
 246 {
 247         hw_regs_t hw;
 248
 249         memset(&hw, 0, sizeof(hw_regs_t));
 250
 251         ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
 252
 253         memcpy(&hwif->hw, &hw, sizeof(hw));
 254         memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
 255
 256         hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
 257 #ifdef CONFIG_BLK_DEV_HD
 258         if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
 259                 hwif->noprobe = 1;      /* may be overridden by ide_setup() */
 260 #endif
 261 }
 262
 263 extern void ide_arm_init(void);
 264
 265 /*
 266  * init_ide_data() sets reasonable default values into all fields
 267  * of all instances of the hwifs and drives, but only on the first call.
 268  * Subsequent calls have no effect (they don't wipe out anything).
 269  *
 270  * This routine is normally called at driver initialization time,
 271  * but may also be called MUCH earlier during kernel "command-line"
 272  * parameter processing.  As such, we cannot depend on any other parts
 273  * of the kernel (such as memory allocation) to be functioning yet.
 274  *
 275  * This is too bad, as otherwise we could dynamically allocate the
 276  * ide_drive_t structs as needed, rather than always consuming memory
 277  * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
 278  *
 279  * FIXME: We should stuff the setup data into __init and copy the
 280  * relevant hwifs/allocate them properly during boot.
 281  */
 282 #define MAGIC_COOKIE 0x12345678
 283 static void __init init_ide_data (void)
 284 {
 285         ide_hwif_t *hwif;
 286         unsigned int index;
 287         static unsigned long magic_cookie = MAGIC_COOKIE;
 288
 289         if (magic_cookie != MAGIC_COOKIE)
 290                 return;         /* already initialized */
 291         magic_cookie = 0;
 292
 293         /* Initialise all interface structures */
 294         for (index = 0; index < MAX_HWIFS; ++index) {
 295                 hwif = &ide_hwifs[index];
 296                 init_hwif_data(hwif, index);
 297                 init_hwif_default(hwif, index);
 298 #if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
 299                 hwif->irq = hwif->hw.irq =
 300                         ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
 301 #endif
 302         }
 303 #ifdef CONFIG_IDE_ARM
 304         ide_arm_init();
 305 #endif
 306 }
 307
 308 /**
 309  *      ide_system_bus_speed    -       guess bus speed
 310  *
 311  *      ide_system_bus_speed() returns what we think is the system VESA/PCI
 312  *      bus speed (in MHz). This is used for calculating interface PIO timings.
 313  *      The default is 40 for known PCI systems, 50 otherwise.
 314  *      The "idebus=xx" parameter can be used to override this value.
 315  *      The actual value to be used is computed/displayed the first time
 316  *      through. Drivers should only use this as a last resort.
 317  *
 318  *      Returns a guessed speed in MHz.
 319  */
 320
 321 static int ide_system_bus_speed(void)
 322 {
 323 #ifdef CONFIG_PCI
 324         static struct pci_device_id pci_default[] = {
 325                 { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
 326                 { }
 327         };
 328 #else
 329 #define pci_default 0
 330 #endif /* CONFIG_PCI */
 331
 332         if (!system_bus_speed) {
 333                 if (idebus_parameter) {
 334                         /* user supplied value */
 335                         system_bus_speed = idebus_parameter;
 336                 } else if (pci_dev_present(pci_default)) {
 337                         /* safe default value for PCI */
 338                         system_bus_speed = 33;
 339                 } else {
 340                         /* safe default value for VESA and PCI */
 341                         system_bus_speed = 50;
 342                 }
 343                 printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
 344                         "for PIO modes%s\n", system_bus_speed,
 345                         idebus_parameter ? "" : "; override with idebus=xx");
 346         }
 347         return system_bus_speed;
 348 }
 349
 350 static struct resource* hwif_request_region(ide_hwif_t *hwif,
 351                                             unsigned long addr, int num)
 352 {
 353         struct resource *res = request_region(addr, num, hwif->name);
 354
 355         if (!res)
 356                 printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
 357                                 hwif->name, addr, addr+num-1);
 358         return res;
 359 }
 360
 361 /**
 362  *      ide_hwif_request_regions - request resources for IDE
 363  *      @hwif: interface to use
 364  *
 365  *      Requests all the needed resources for an interface.
 366  *      Right now core IDE code does this work which is deeply wrong.
 367  *      MMIO leaves it to the controller driver,
 368  *      PIO will migrate this way over time.
 369  */
 370
 371 int ide_hwif_request_regions(ide_hwif_t *hwif)
 372 {
 373         unsigned long addr;
 374         unsigned int i;
 375
 376         if (hwif->mmio)
 377                 return 0;
 378         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
 379         if (addr && !hwif_request_region(hwif, addr, 1))
 380                 goto control_region_busy;
 381         hwif->straight8 = 0;
 382         addr = hwif->io_ports[IDE_DATA_OFFSET];
 383         if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) {
 384                 if (!hwif_request_region(hwif, addr, 8))
 385                         goto data_region_busy;
 386                 hwif->straight8 = 1;
 387                 return 0;
 388         }
 389         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
 390                 addr = hwif->io_ports[i];
 391                 if (!hwif_request_region(hwif, addr, 1)) {
 392                         while (--i)
 393                                 release_region(addr, 1);
 394                         goto data_region_busy;
 395                 }
 396         }
 397         return 0;
 398
 399 data_region_busy:
 400         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
 401         if (addr)
 402                 release_region(addr, 1);
 403 control_region_busy:
 404         /* If any errors are return, we drop the hwif interface. */
 405         return -EBUSY;
 406 }
 407
 408 /**
 409  *      ide_hwif_release_regions - free IDE resources
 410  *
 411  *      Note that we only release the standard ports,
 412  *      and do not even try to handle any extra ports
 413  *      allocated for weird IDE interface chipsets.
 414  *
 415  *      Note also that we don't yet handle mmio resources here. More
 416  *      importantly our caller should be doing this so we need to
 417  *      restructure this as a helper function for drivers.
 418  */
 419
 420 void ide_hwif_release_regions(ide_hwif_t *hwif)
 421 {
 422         u32 i = 0;
 423
 424         if (hwif->mmio)
 425                 return;
 426         if (hwif->io_ports[IDE_CONTROL_OFFSET])
 427                 release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
 428         if (hwif->straight8) {
 429                 release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
 430                 return;
 431         }
 432         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
 433                 if (hwif->io_ports[i])
 434                         release_region(hwif->io_ports[i], 1);
 435 }
 436
 437 /**
 438  *      ide_hwif_restore        -       restore hwif to template
 439  *      @hwif: hwif to update
 440  *      @tmp_hwif: template
 441  *
 442  *      Restore hwif to a previous state by copying most settings
 443  *      from the template.
 444  */
 445
 446 static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 447 {
 448         hwif->hwgroup                   = tmp_hwif->hwgroup;
 449
 450         hwif->gendev.parent             = tmp_hwif->gendev.parent;
 451
 452         hwif->proc                      = tmp_hwif->proc;
 453
 454         hwif->major                     = tmp_hwif->major;
 455         hwif->straight8                 = tmp_hwif->straight8;
 456         hwif->bus_state                 = tmp_hwif->bus_state;
 457
 458         hwif->atapi_dma                 = tmp_hwif->atapi_dma;
 459         hwif->ultra_mask                = tmp_hwif->ultra_mask;
 460         hwif->mwdma_mask                = tmp_hwif->mwdma_mask;
 461         hwif->swdma_mask                = tmp_hwif->swdma_mask;
 462
 463         hwif->chipset                   = tmp_hwif->chipset;
 464         hwif->hold                      = tmp_hwif->hold;
 465
 466 #ifdef CONFIG_BLK_DEV_IDEPCI
 467         hwif->pci_dev                   = tmp_hwif->pci_dev;
 468         hwif->cds                       = tmp_hwif->cds;
 469 #endif
 470
 471         hwif->tuneproc                  = tmp_hwif->tuneproc;
 472         hwif->speedproc                 = tmp_hwif->speedproc;
 473         hwif->udma_filter               = tmp_hwif->udma_filter;
 474         hwif->selectproc                = tmp_hwif->selectproc;
 475         hwif->reset_poll                = tmp_hwif->reset_poll;
 476         hwif->pre_reset                 = tmp_hwif->pre_reset;
 477         hwif->resetproc                 = tmp_hwif->resetproc;
 478         hwif->intrproc                  = tmp_hwif->intrproc;
 479         hwif->maskproc                  = tmp_hwif->maskproc;
 480         hwif->quirkproc                 = tmp_hwif->quirkproc;
 481         hwif->busproc                   = tmp_hwif->busproc;
 482
 483         hwif->ata_input_data            = tmp_hwif->ata_input_data;
 484         hwif->ata_output_data           = tmp_hwif->ata_output_data;
 485         hwif->atapi_input_bytes         = tmp_hwif->atapi_input_bytes;
 486         hwif->atapi_output_bytes        = tmp_hwif->atapi_output_bytes;
 487
 488         hwif->dma_setup                 = tmp_hwif->dma_setup;
 489         hwif->dma_exec_cmd              = tmp_hwif->dma_exec_cmd;
 490         hwif->dma_start                 = tmp_hwif->dma_start;
 491         hwif->ide_dma_end               = tmp_hwif->ide_dma_end;
 492         hwif->ide_dma_check             = tmp_hwif->ide_dma_check;
 493         hwif->ide_dma_on                = tmp_hwif->ide_dma_on;
 494         hwif->dma_off_quietly           = tmp_hwif->dma_off_quietly;
 495         hwif->ide_dma_test_irq          = tmp_hwif->ide_dma_test_irq;
 496         hwif->ide_dma_clear_irq         = tmp_hwif->ide_dma_clear_irq;
 497         hwif->dma_host_on               = tmp_hwif->dma_host_on;
 498         hwif->dma_host_off              = tmp_hwif->dma_host_off;
 499         hwif->dma_lost_irq              = tmp_hwif->dma_lost_irq;
 500         hwif->dma_timeout               = tmp_hwif->dma_timeout;
 501
 502         hwif->OUTB                      = tmp_hwif->OUTB;
 503         hwif->OUTBSYNC                  = tmp_hwif->OUTBSYNC;
 504         hwif->OUTW                      = tmp_hwif->OUTW;
 505         hwif->OUTSW                     = tmp_hwif->OUTSW;
 506         hwif->OUTSL                     = tmp_hwif->OUTSL;
 507
 508         hwif->INB                       = tmp_hwif->INB;
 509         hwif->INW                       = tmp_hwif->INW;
 510         hwif->INSW                      = tmp_hwif->INSW;
 511         hwif->INSL                      = tmp_hwif->INSL;
 512
 513         hwif->sg_max_nents              = tmp_hwif->sg_max_nents;
 514
 515         hwif->mmio                      = tmp_hwif->mmio;
 516         hwif->rqsize                    = tmp_hwif->rqsize;
 517         hwif->no_lba48                  = tmp_hwif->no_lba48;
 518
 519 #ifndef CONFIG_BLK_DEV_IDECS
 520         hwif->irq                       = tmp_hwif->irq;
 521 #endif
 522
 523         hwif->dma_base                  = tmp_hwif->dma_base;
 524         hwif->dma_master                = tmp_hwif->dma_master;
 525         hwif->dma_command               = tmp_hwif->dma_command;
 526         hwif->dma_vendor1               = tmp_hwif->dma_vendor1;
 527         hwif->dma_status                = tmp_hwif->dma_status;
 528         hwif->dma_vendor3               = tmp_hwif->dma_vendor3;
 529         hwif->dma_prdtable              = tmp_hwif->dma_prdtable;
 530
 531         hwif->config_data               = tmp_hwif->config_data;
 532         hwif->select_data               = tmp_hwif->select_data;
 533         hwif->extra_base                = tmp_hwif->extra_base;
 534         hwif->extra_ports               = tmp_hwif->extra_ports;
 535         hwif->autodma                   = tmp_hwif->autodma;
 536         hwif->udma_four                 = tmp_hwif->udma_four;
 537
 538         hwif->hwif_data                 = tmp_hwif->hwif_data;
 539 }
 540
 541 /**
 542  *      ide_unregister          -       free an IDE interface
 543  *      @index: index of interface (will change soon to a pointer)
 544  *
 545  *      Perform the final unregister of an IDE interface. At the moment
 546  *      we don't refcount interfaces so this will also get split up.
 547  *
 548  *      Locking:
 549  *      The caller must not hold the IDE locks
 550  *      The drive present/vanishing is not yet properly locked
 551  *      Take care with the callbacks. These have been split to avoid
 552  *      deadlocking the IDE layer. The shutdown callback is called
 553  *      before we take the lock and free resources. It is up to the
 554  *      caller to be sure there is no pending I/O here, and that
 555  *      the interface will not be reopened (present/vanishing locking
 556  *      isn't yet done BTW). After we commit to the final kill we
 557  *      call the cleanup callback with the ide locks held.
 558  *
 559  *      Unregister restores the hwif structures to the default state.
 560  *      This is raving bonkers.
 561  */
 562
 563 void ide_unregister(unsigned int index)
 564 {
 565         ide_drive_t *drive;
 566         ide_hwif_t *hwif, *g;
 567         static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */
 568         ide_hwgroup_t *hwgroup;
 569         int irq_count = 0, unit;
 570
 571         BUG_ON(index >= MAX_HWIFS);
 572
 573         BUG_ON(in_interrupt());
 574         BUG_ON(irqs_disabled());
 575         mutex_lock(&ide_cfg_mtx);
 576         spin_lock_irq(&ide_lock);
 577         hwif = &ide_hwifs[index];
 578         if (!hwif->present)
 579                 goto abort;
 580         for (unit = 0; unit < MAX_DRIVES; ++unit) {
 581                 drive = &hwif->drives[unit];
 582                 if (!drive->present)
 583                         continue;
 584                 spin_unlock_irq(&ide_lock);
 585                 device_unregister(&drive->gendev);
 586                 wait_for_completion(&drive->gendev_rel_comp);
 587                 spin_lock_irq(&ide_lock);
 588         }
 589         hwif->present = 0;
 590
 591         spin_unlock_irq(&ide_lock);
 592
 593         ide_proc_unregister_port(hwif);
 594
 595         hwgroup = hwif->hwgroup;
 596         /*
 597          * free the irq if we were the only hwif using it
 598          */
 599         g = hwgroup->hwif;
 600         do {
 601                 if (g->irq == hwif->irq)
 602                         ++irq_count;
 603                 g = g->next;
 604         } while (g != hwgroup->hwif);
 605         if (irq_count == 1)
 606                 free_irq(hwif->irq, hwgroup);
 607
 608         spin_lock_irq(&ide_lock);
 609         /*
 610          * Note that we only release the standard ports,
 611          * and do not even try to handle any extra ports
 612          * allocated for weird IDE interface chipsets.
 613          */
 614         ide_hwif_release_regions(hwif);
 615
 616         /*
 617          * Remove us from the hwgroup, and free
 618          * the hwgroup if we were the only member
 619          */
 620         if (hwif->next == hwif) {
 621                 BUG_ON(hwgroup->hwif != hwif);
 622                 kfree(hwgroup);
 623         } else {
 624                 /* There is another interface in hwgroup.
 625                  * Unlink us, and set hwgroup->drive and ->hwif to
 626                  * something sane.
 627                  */
 628                 g = hwgroup->hwif;
 629                 while (g->next != hwif)
 630                         g = g->next;
 631                 g->next = hwif->next;
 632                 if (hwgroup->hwif == hwif) {
 633                         /* Chose a random hwif for hwgroup->hwif.
 634                          * It's guaranteed that there are no drives
 635                          * left in the hwgroup.
 636                          */
 637                         BUG_ON(hwgroup->drive != NULL);
 638                         hwgroup->hwif = g;
 639                 }
 640                 BUG_ON(hwgroup->hwif == hwif);
 641         }
 642
 643         /* More messed up locking ... */
 644         spin_unlock_irq(&ide_lock);
 645         device_unregister(&hwif->gendev);
 646         wait_for_completion(&hwif->gendev_rel_comp);
 647
 648         /*
 649          * Remove us from the kernel's knowledge
 650          */
 651         blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
 652         kfree(hwif->sg_table);
 653         unregister_blkdev(hwif->major, hwif->name);
 654         spin_lock_irq(&ide_lock);
 655
 656         if (hwif->dma_base) {
 657                 (void) ide_release_dma(hwif);
 658
 659                 hwif->dma_base = 0;
 660                 hwif->dma_master = 0;
 661                 hwif->dma_command = 0;
 662                 hwif->dma_vendor1 = 0;
 663                 hwif->dma_status = 0;
 664                 hwif->dma_vendor3 = 0;
 665                 hwif->dma_prdtable = 0;
 666
 667                 hwif->extra_base  = 0;
 668                 hwif->extra_ports = 0;
 669         }
 670
 671         /* copy original settings */
 672         tmp_hwif = *hwif;
 673
 674         /* restore hwif data to pristine status */
 675         init_hwif_data(hwif, index);
 676         init_hwif_default(hwif, index);
 677
 678         ide_hwif_restore(hwif, &tmp_hwif);
 679
 680 abort:
 681         spin_unlock_irq(&ide_lock);
 682         mutex_unlock(&ide_cfg_mtx);
 683 }
 684
 685 EXPORT_SYMBOL(ide_unregister);
 686
 687
 688 /**
 689  *      ide_setup_ports         -       set up IDE interface ports
 690  *      @hw: register descriptions
 691  *      @base: base register
 692  *      @offsets: table of register offsets
 693  *      @ctrl: control register
 694  *      @ack_irq: IRQ ack
 695  *      @irq: interrupt lie
 696  *
 697  *      Setup hw_regs_t structure described by parameters.  You
 698  *      may set up the hw structure yourself OR use this routine to
 699  *      do it for you. This is basically a helper
 700  *
 701  */
 702
 703 void ide_setup_ports (  hw_regs_t *hw,
 704                         unsigned long base, int *offsets,
 705                         unsigned long ctrl, unsigned long intr,
 706                         ide_ack_intr_t *ack_intr,
 707 /*
 708  *                      ide_io_ops_t *iops,
 709  */
 710                         int irq)
 711 {
 712         int i;
 713
 714         memset(hw, 0, sizeof(hw_regs_t));
 715         for (i = 0; i < IDE_NR_PORTS; i++) {
 716                 if (offsets[i] == -1) {
 717                         switch(i) {
 718                                 case IDE_CONTROL_OFFSET:
 719                                         hw->io_ports[i] = ctrl;
 720                                         break;
 721 #if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
 722                                 case IDE_IRQ_OFFSET:
 723                                         hw->io_ports[i] = intr;
 724                                         break;
 725 #endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
 726                                 default:
 727                                         hw->io_ports[i] = 0;
 728                                         break;
 729                         }
 730                 } else {
 731                         hw->io_ports[i] = base + offsets[i];
 732                 }
 733         }
 734         hw->irq = irq;
 735         hw->dma = NO_DMA;
 736         hw->ack_intr = ack_intr;
 737 /*
 738  *      hw->iops = iops;
 739  */
 740 }
 741
 742 /**
 743  *      ide_register_hw_with_fixup      -       register IDE interface
 744  *      @hw: hardware registers
 745  *      @initializing: set while initializing built-in drivers
 746  *      @hwifp: pointer to returned hwif
 747  *      @fixup: fixup function
 748  *
 749  *      Register an IDE interface, specifying exactly the registers etc.
 750  *      Set init=1 iff calling before probes have taken place.
 751  *
 752  *      Returns -1 on error.
 753  */
 754
 755 int ide_register_hw_with_fixup(hw_regs_t *hw, int initializing,
 756                                ide_hwif_t **hwifp,
 757                                void(*fixup)(ide_hwif_t *hwif))
 758 {
 759         int index, retry = 1;
 760         ide_hwif_t *hwif;
 761
 762         do {
 763                 for (index = 0; index < MAX_HWIFS; ++index) {
 764                         hwif = &ide_hwifs[index];
 765                         if (hwif->hw.io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
 766                                 goto found;
 767                 }
 768                 for (index = 0; index < MAX_HWIFS; ++index) {
 769                         hwif = &ide_hwifs[index];
 770                         if (hwif->hold)
 771                                 continue;
 772                         if ((!hwif->present && !hwif->mate && !initializing) ||
 773                             (!hwif->hw.io_ports[IDE_DATA_OFFSET] && initializing))
 774                                 goto found;
 775                 }
 776                 for (index = 0; index < MAX_HWIFS; index++)
 777                         ide_unregister(index);
 778         } while (retry--);
 779         return -1;
 780 found:
 781         if (hwif->present)
 782                 ide_unregister(index);
 783         else if (!hwif->hold) {
 784                 init_hwif_data(hwif, index);
 785                 init_hwif_default(hwif, index);
 786         }
 787         if (hwif->present)
 788                 return -1;
 789         memcpy(&hwif->hw, hw, sizeof(*hw));
 790         memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
 791         hwif->irq = hw->irq;
 792         hwif->noprobe = 0;
 793         hwif->chipset = hw->chipset;
 794         hwif->gendev.parent = hw->dev;
 795
 796         if (!initializing) {
 797                 probe_hwif_init_with_fixup(hwif, fixup);
 798                 ide_proc_register_port(hwif);
 799         }
 800
 801         if (hwifp)
 802                 *hwifp = hwif;
 803
 804         return (initializing || hwif->present) ? index : -1;
 805 }
 806
 807 EXPORT_SYMBOL(ide_register_hw_with_fixup);
 808
 809 int ide_register_hw(hw_regs_t *hw, int initializing, ide_hwif_t **hwifp)
 810 {
 811         return ide_register_hw_with_fixup(hw, initializing, hwifp, NULL);
 812 }
 813
 814 EXPORT_SYMBOL(ide_register_hw);
 815
 816 /*
 817  *      Locks for IDE setting functionality
 818  */
 819
 820 DECLARE_MUTEX(ide_setting_sem);
 821
 822 EXPORT_SYMBOL_GPL(ide_setting_sem);
 823
 824 /**
 825  *      ide_spin_wait_hwgroup   -       wait for group
 826  *      @drive: drive in the group
 827  *
 828  *      Wait for an IDE device group to go non busy and then return
 829  *      holding the ide_lock which guards the hwgroup->busy status
 830  *      and right to use it.
 831  */
 832
 833 int ide_spin_wait_hwgroup (ide_drive_t *drive)
 834 {
 835         ide_hwgroup_t *hwgroup = HWGROUP(drive);
 836         unsigned long timeout = jiffies + (3 * HZ);
 837
 838         spin_lock_irq(&ide_lock);
 839
 840         while (hwgroup->busy) {
 841                 unsigned long lflags;
 842                 spin_unlock_irq(&ide_lock);
 843                 local_irq_set(lflags);
 844                 if (time_after(jiffies, timeout)) {
 845                         local_irq_restore(lflags);
 846                         printk(KERN_ERR "%s: channel busy\n", drive->name);
 847                         return -EBUSY;
 848                 }
 849                 local_irq_restore(lflags);
 850                 spin_lock_irq(&ide_lock);
 851         }
 852         return 0;
 853 }
 854
 855 EXPORT_SYMBOL(ide_spin_wait_hwgroup);
 856
 857 int set_io_32bit(ide_drive_t *drive, int arg)
 858 {
 859         if (drive->no_io_32bit)
 860                 return -EPERM;
 861
 862         if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
 863                 return -EINVAL;
 864
 865         drive->io_32bit = arg;
 866 #ifdef CONFIG_BLK_DEV_DTC2278
 867         if (HWIF(drive)->chipset == ide_dtc2278)
 868                 HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
 869 #endif /* CONFIG_BLK_DEV_DTC2278 */
 870         return 0;
 871 }
 872
 873 static int set_ksettings(ide_drive_t *drive, int arg)
 874 {
 875         if (arg < 0 || arg > 1)
 876                 return -EINVAL;
 877
 878         if (ide_spin_wait_hwgroup(drive))
 879                 return -EBUSY;
 880         drive->keep_settings = arg;
 881         spin_unlock_irq(&ide_lock);
 882
 883         return 0;
 884 }
 885
 886 int set_using_dma(ide_drive_t *drive, int arg)
 887 {
 888 #ifdef CONFIG_BLK_DEV_IDEDMA
 889         ide_hwif_t *hwif = drive->hwif;
 890         int err = -EPERM;
 891
 892         if (arg < 0 || arg > 1)
 893                 return -EINVAL;
 894
 895         if (!drive->id || !(drive->id->capability & 1))
 896                 goto out;
 897
 898         if (hwif->ide_dma_check == NULL)
 899                 goto out;
 900
 901         err = -EBUSY;
 902         if (ide_spin_wait_hwgroup(drive))
 903                 goto out;
 904         /*
 905          * set ->busy flag, unlock and let it ride
 906          */
 907         hwif->hwgroup->busy = 1;
 908         spin_unlock_irq(&ide_lock);
 909
 910         err = 0;
 911
 912         if (arg) {
 913                 hwif->dma_off_quietly(drive);
 914                 if (ide_set_dma(drive) || hwif->ide_dma_on(drive))
 915                         err = -EIO;
 916         } else
 917                 ide_dma_off(drive);
 918
 919         /*
 920          * lock, clear ->busy flag and unlock before leaving
 921          */
 922         spin_lock_irq(&ide_lock);
 923         hwif->hwgroup->busy = 0;
 924         spin_unlock_irq(&ide_lock);
 925 out:
 926         return err;
 927 #else
 928         if (arg < 0 || arg > 1)
 929                 return -EINVAL;
 930
 931         return -EPERM;
 932 #endif
 933 }
 934
 935 int set_pio_mode(ide_drive_t *drive, int arg)
 936 {
 937         struct request rq;
 938
 939         if (arg < 0 || arg > 255)
 940                 return -EINVAL;
 941
 942         if (!HWIF(drive)->tuneproc)
 943                 return -ENOSYS;
 944         if (drive->special.b.set_tune)
 945                 return -EBUSY;
 946         ide_init_drive_cmd(&rq);
 947         drive->tune_req = (u8) arg;
 948         drive->special.b.set_tune = 1;
 949         (void) ide_do_drive_cmd(drive, &rq, ide_wait);
 950         return 0;
 951 }
 952
 953 static int set_unmaskirq(ide_drive_t *drive, int arg)
 954 {
 955         if (drive->no_unmask)
 956                 return -EPERM;
 957
 958         if (arg < 0 || arg > 1)
 959                 return -EINVAL;
 960
 961         if (ide_spin_wait_hwgroup(drive))
 962                 return -EBUSY;
 963         drive->unmask = arg;
 964         spin_unlock_irq(&ide_lock);
 965
 966         return 0;
 967 }
 968
 969 /**
 970  *      system_bus_clock        -       clock guess
 971  *
 972  *      External version of the bus clock guess used by very old IDE drivers
 973  *      for things like VLB timings. Should not be used.
 974  */
 975
 976 int system_bus_clock (void)
 977 {
 978         return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
 979 }
 980
 981 EXPORT_SYMBOL(system_bus_clock);
 982
 983 static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 984 {
 985         ide_drive_t *drive = dev->driver_data;
 986         ide_hwif_t *hwif = HWIF(drive);
 987         struct request rq;
 988         struct request_pm_state rqpm;
 989         ide_task_t args;
 990
 991         /* Call ACPI _GTM only once */
 992         if (!(drive->dn % 2))
 993                 ide_acpi_get_timing(hwif);
 994
 995         memset(&rq, 0, sizeof(rq));
 996         memset(&rqpm, 0, sizeof(rqpm));
 997         memset(&args, 0, sizeof(args));
 998         rq.cmd_type = REQ_TYPE_PM_SUSPEND;
 999         rq.special = &args;
1000         rq.data = &rqpm;
1001         rqpm.pm_step = ide_pm_state_start_suspend;
1002         if (mesg.event == PM_EVENT_PRETHAW)
1003                 mesg.event = PM_EVENT_FREEZE;
1004         rqpm.pm_state = mesg.event;
1005
1006         return ide_do_drive_cmd(drive, &rq, ide_wait);
1007 }
1008
1009 static int generic_ide_resume(struct device *dev)
1010 {
1011         ide_drive_t *drive = dev->driver_data;
1012         ide_hwif_t *hwif = HWIF(drive);
1013         struct request rq;
1014         struct request_pm_state rqpm;
1015         ide_task_t args;
1016         int err;
1017
1018         /* Call ACPI _STM only once */
1019         if (!(drive->dn % 2))
1020                 ide_acpi_push_timing(hwif);
1021
1022         ide_acpi_exec_tfs(drive);
1023
1024         memset(&rq, 0, sizeof(rq));
1025         memset(&rqpm, 0, sizeof(rqpm));
1026         memset(&args, 0, sizeof(args));
1027         rq.cmd_type = REQ_TYPE_PM_RESUME;
1028         rq.special = &args;
1029         rq.data = &rqpm;
1030         rqpm.pm_step = ide_pm_state_start_resume;
1031         rqpm.pm_state = PM_EVENT_ON;
1032
1033         err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
1034
1035         if (err == 0 && dev->driver) {
1036                 ide_driver_t *drv = to_ide_driver(dev->driver);
1037
1038                 if (drv->resume)
1039                         drv->resume(drive);
1040         }
1041
1042         return err;
1043 }
1044
1045 int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
1046                         unsigned int cmd, unsigned long arg)
1047 {
1048         unsigned long flags;
1049         ide_driver_t *drv;
1050         void __user *p = (void __user *)arg;
1051         int err = 0, (*setfunc)(ide_drive_t *, int);
1052         u8 *val;
1053
1054         switch (cmd) {
1055         case HDIO_GET_32BIT:        val = &drive->io_32bit;      goto read_val;
1056         case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val;
1057         case HDIO_GET_UNMASKINTR:   val = &drive->unmask;        goto read_val;
1058         case HDIO_GET_DMA:          val = &drive->using_dma;     goto read_val;
1059         case HDIO_SET_32BIT:        setfunc = set_io_32bit;      goto set_val;
1060         case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings;     goto set_val;
1061         case HDIO_SET_PIO_MODE:     setfunc = set_pio_mode;      goto set_val;
1062         case HDIO_SET_UNMASKINTR:   setfunc = set_unmaskirq;     goto set_val;
1063         case HDIO_SET_DMA:          setfunc = set_using_dma;     goto set_val;
1064         }
1065
1066         switch (cmd) {
1067                 case HDIO_OBSOLETE_IDENTITY:
1068                 case HDIO_GET_IDENTITY:
1069                         if (bdev != bdev->bd_contains)
1070                                 return -EINVAL;
1071                         if (drive->id_read == 0)
1072                                 return -ENOMSG;
1073                         if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
1074                                 return -EFAULT;
1075                         return 0;
1076
1077                 case HDIO_GET_NICE:
1078                         return put_user(drive->dsc_overlap      <<      IDE_NICE_DSC_OVERLAP    |
1079                                         drive->atapi_overlap    <<      IDE_NICE_ATAPI_OVERLAP  |
1080                                         drive->nice0            <<      IDE_NICE_0              |
1081                                         drive->nice1            <<      IDE_NICE_1              |
1082                                         drive->nice2            <<      IDE_NICE_2,
1083                                         (long __user *) arg);
1084
1085 #ifdef CONFIG_IDE_TASK_IOCTL
1086                 case HDIO_DRIVE_TASKFILE:
1087                         if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
1088                                 return -EACCES;
1089                         switch(drive->media) {
1090                                 case ide_disk:
1091                                         return ide_taskfile_ioctl(drive, cmd, arg);
1092                                 default:
1093                                         return -ENOMSG;
1094                         }
1095 #endif /* CONFIG_IDE_TASK_IOCTL */
1096
1097                 case HDIO_DRIVE_CMD:
1098                         if (!capable(CAP_SYS_RAWIO))
1099                                 return -EACCES;
1100                         return ide_cmd_ioctl(drive, cmd, arg);
1101
1102                 case HDIO_DRIVE_TASK:
1103                         if (!capable(CAP_SYS_RAWIO))
1104                                 return -EACCES;
1105                         return ide_task_ioctl(drive, cmd, arg);
1106
1107                 case HDIO_SCAN_HWIF:
1108                 {
1109                         hw_regs_t hw;
1110                         int args[3];
1111                         if (!capable(CAP_SYS_RAWIO)) return -EACCES;
1112                         if (copy_from_user(args, p, 3 * sizeof(int)))
1113                                 return -EFAULT;
1114                         memset(&hw, 0, sizeof(hw));
1115                         ide_init_hwif_ports(&hw, (unsigned long) args[0],
1116                                             (unsigned long) args[1], NULL);
1117                         hw.irq = args[2];
1118                         if (ide_register_hw(&hw, 0, NULL) == -1)
1119                                 return -EIO;
1120                         return 0;
1121                 }
1122                 case HDIO_UNREGISTER_HWIF:
1123                         if (!capable(CAP_SYS_RAWIO)) return -EACCES;
1124                         /* (arg > MAX_HWIFS) checked in function */
1125                         ide_unregister(arg);
1126                         return 0;
1127                 case HDIO_SET_NICE:
1128                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
1129                         if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
1130                                 return -EPERM;
1131                         drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
1132                         drv = *(ide_driver_t **)bdev->bd_disk->private_data;
1133                         if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
1134                                 drive->dsc_overlap = 0;
1135                                 return -EPERM;
1136                         }
1137                         drive->nice1 = (arg >> IDE_NICE_1) & 1;
1138                         return 0;
1139                 case HDIO_DRIVE_RESET:
1140                 {
1141                         unsigned long flags;
1142                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
1143
1144                         /*
1145                          *      Abort the current command on the
1146                          *      group if there is one, taking
1147                          *      care not to allow anything else
1148                          *      to be queued and to die on the
1149                          *      spot if we miss one somehow
1150                          */
1151
1152                         spin_lock_irqsave(&ide_lock, flags);
1153
1154                         if (HWGROUP(drive)->resetting) {
1155                                 spin_unlock_irqrestore(&ide_lock, flags);
1156                                 return -EBUSY;
1157                         }
1158
1159                         ide_abort(drive, "drive reset");
1160
1161                         BUG_ON(HWGROUP(drive)->handler);
1162
1163                         /* Ensure nothing gets queued after we
1164                            drop the lock. Reset will clear the busy */
1165
1166                         HWGROUP(drive)->busy = 1;
1167                         spin_unlock_irqrestore(&ide_lock, flags);
1168                         (void) ide_do_reset(drive);
1169
1170                         return 0;
1171                 }
1172
1173                 case CDROMEJECT:
1174                 case CDROMCLOSETRAY:
1175                         return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p);
1176
1177                 case HDIO_GET_BUSSTATE:
1178                         if (!capable(CAP_SYS_ADMIN))
1179                                 return -EACCES;
1180                         if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
1181                                 return -EFAULT;
1182                         return 0;
1183
1184                 case HDIO_SET_BUSSTATE:
1185                         if (!capable(CAP_SYS_ADMIN))
1186                                 return -EACCES;
1187                         if (HWIF(drive)->busproc)
1188                                 return HWIF(drive)->busproc(drive, (int)arg);
1189                         return -EOPNOTSUPP;
1190                 default:
1191                         return -EINVAL;
1192         }
1193
1194 read_val:
1195         down(&ide_setting_sem);
1196         spin_lock_irqsave(&ide_lock, flags);
1197         err = *val;
1198         spin_unlock_irqrestore(&ide_lock, flags);
1199         up(&ide_setting_sem);
1200         return err >= 0 ? put_user(err, (long __user *)arg) : err;
1201
1202 set_val:
1203         if (bdev != bdev->bd_contains)
1204                 err = -EINVAL;
1205         else {
1206                 if (!capable(CAP_SYS_ADMIN))
1207                         err = -EACCES;
1208                 else {
1209                         down(&ide_setting_sem);
1210                         err = setfunc(drive, arg);
1211                         up(&ide_setting_sem);
1212                 }
1213         }
1214         return err;
1215 }
1216
1217 EXPORT_SYMBOL(generic_ide_ioctl);
1218
1219 /*
1220  * stridx() returns the offset of c within s,
1221  * or -1 if c is '\0' or not found within s.
1222  */
1223 static int __init stridx (const char *s, char c)
1224 {
1225         char *i = strchr(s, c);
1226         return (i && c) ? i - s : -1;
1227 }
1228
1229 /*
1230  * match_parm() does parsing for ide_setup():
1231  *
1232  * 1. the first char of s must be '='.
1233  * 2. if the remainder matches one of the supplied keywords,
1234  *     the index (1 based) of the keyword is negated and returned.
1235  * 3. if the remainder is a series of no more than max_vals numbers
1236  *     separated by commas, the numbers are saved in vals[] and a
1237  *     count of how many were saved is returned.  Base10 is assumed,
1238  *     and base16 is allowed when prefixed with "0x".
1239  * 4. otherwise, zero is returned.
1240  */
1241 static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
1242 {
1243         static const char *decimal = "0123456789";
1244         static const char *hex = "0123456789abcdef";
1245         int i, n;
1246
1247         if (*s++ == '=') {
1248                 /*
1249                  * Try matching against the supplied keywords,
1250                  * and return -(index+1) if we match one
1251                  */
1252                 if (keywords != NULL) {
1253                         for (i = 0; *keywords != NULL; ++i) {
1254                                 if (!strcmp(s, *keywords++))
1255                                         return -(i+1);
1256                         }
1257                 }
1258                 /*
1259                  * Look for a series of no more than "max_vals"
1260                  * numeric values separated by commas, in base10,
1261                  * or base16 when prefixed with "0x".
1262                  * Return a count of how many were found.
1263                  */
1264                 for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
1265                         vals[n] = i;
1266                         while ((i = stridx(decimal, *++s)) >= 0)
1267                                 vals[n] = (vals[n] * 10) + i;
1268                         if (*s == 'x' && !vals[n]) {
1269                                 while ((i = stridx(hex, *++s)) >= 0)
1270                                         vals[n] = (vals[n] * 0x10) + i;
1271                         }
1272                         if (++n == max_vals)
1273                                 break;
1274                         if (*s == ',' || *s == ';')
1275                                 ++s;
1276                 }
1277                 if (!*s)
1278                         return n;
1279         }
1280         return 0;       /* zero = nothing matched */
1281 }
1282
1283 #ifdef CONFIG_BLK_DEV_ALI14XX
1284 extern int probe_ali14xx;
1285 extern int ali14xx_init(void);
1286 #endif
1287 #ifdef CONFIG_BLK_DEV_UMC8672
1288 extern int probe_umc8672;
1289 extern int umc8672_init(void);
1290 #endif
1291 #ifdef CONFIG_BLK_DEV_DTC2278
1292 extern int probe_dtc2278;
1293 extern int dtc2278_init(void);
1294 #endif
1295 #ifdef CONFIG_BLK_DEV_HT6560B
1296 extern int probe_ht6560b;
1297 extern int ht6560b_init(void);
1298 #endif
1299 #ifdef CONFIG_BLK_DEV_QD65XX
1300 extern int probe_qd65xx;
1301 extern int qd65xx_init(void);
1302 #endif
1303
1304 static int __initdata is_chipset_set[MAX_HWIFS];
1305
1306 /*
1307  * ide_setup() gets called VERY EARLY during initialization,
1308  * to handle kernel "command line" strings beginning with "hdx=" or "ide".
1309  *
1310  * Remember to update Documentation/ide.txt if you change something here.
1311  */
1312 static int __init ide_setup(char *s)
1313 {
1314         int i, vals[3];
1315         ide_hwif_t *hwif;
1316         ide_drive_t *drive;
1317         unsigned int hw, unit;
1318         const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
1319         const char max_hwif  = '0' + (MAX_HWIFS - 1);
1320
1321
1322         if (strncmp(s,"hd",2) == 0 && s[2] == '=')      /* hd= is for hd.c   */
1323                 return 0;                               /* driver and not us */
1324
1325         if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
1326                 return 0;
1327
1328         printk(KERN_INFO "ide_setup: %s", s);
1329         init_ide_data ();
1330
1331 #ifdef CONFIG_BLK_DEV_IDEDOUBLER
1332         if (!strcmp(s, "ide=doubler")) {
1333                 extern int ide_doubler;
1334
1335                 printk(" : Enabled support for IDE doublers\n");
1336                 ide_doubler = 1;
1337                 return 1;
1338         }
1339 #endif /* CONFIG_BLK_DEV_IDEDOUBLER */
1340
1341         if (!strcmp(s, "ide=nodma")) {
1342                 printk(" : Prevented DMA\n");
1343                 noautodma = 1;
1344                 return 1;
1345         }
1346
1347 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1348         if (!strcmp(s, "ide=reverse")) {
1349                 ide_scan_direction = 1;
1350                 printk(" : Enabled support for IDE inverse scan order.\n");
1351                 return 1;
1352         }
1353 #endif
1354
1355 #ifdef CONFIG_BLK_DEV_IDEACPI
1356         if (!strcmp(s, "ide=noacpi")) {
1357                 //printk(" : Disable IDE ACPI support.\n");
1358                 ide_noacpi = 1;
1359                 return 1;
1360         }
1361         if (!strcmp(s, "ide=acpigtf")) {
1362                 //printk(" : Enable IDE ACPI _GTF support.\n");
1363                 ide_noacpitfs = 0;
1364                 return 1;
1365         }
1366         if (!strcmp(s, "ide=acpionboot")) {
1367                 //printk(" : Call IDE ACPI methods on boot.\n");
1368                 ide_noacpionboot = 0;
1369                 return 1;
1370         }
1371 #endif /* CONFIG_BLK_DEV_IDEACPI */
1372
1373         /*
1374          * Look for drive options:  "hdx="
1375          */
1376         if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
1377                 const char *hd_words[] = {
1378                         "none", "noprobe", "nowerr", "cdrom", "minus5",
1379                         "autotune", "noautotune", "minus8", "swapdata", "bswap",
1380                         "noflush", "remap", "remap63", "scsi", NULL };
1381                 unit = s[2] - 'a';
1382                 hw   = unit / MAX_DRIVES;
1383                 unit = unit % MAX_DRIVES;
1384                 hwif = &ide_hwifs[hw];
1385                 drive = &hwif->drives[unit];
1386                 if (strncmp(s + 4, "ide-", 4) == 0) {
1387                         strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
1388                         goto done;
1389                 }
1390                 switch (match_parm(&s[3], hd_words, vals, 3)) {
1391                         case -1: /* "none" */
1392                         case -2: /* "noprobe" */
1393                                 drive->noprobe = 1;
1394                                 goto done;
1395                         case -3: /* "nowerr" */
1396                                 drive->bad_wstat = BAD_R_STAT;
1397                                 hwif->noprobe = 0;
1398                                 goto done;
1399                         case -4: /* "cdrom" */
1400                                 drive->present = 1;
1401                                 drive->media = ide_cdrom;
1402                                 /* an ATAPI device ignores DRDY */
1403                                 drive->ready_stat = 0;
1404                                 hwif->noprobe = 0;
1405                                 goto done;
1406                         case -6: /* "autotune" */
1407                                 drive->autotune = IDE_TUNE_AUTO;
1408                                 goto obsolete_option;
1409                         case -7: /* "noautotune" */
1410                                 drive->autotune = IDE_TUNE_NOAUTO;
1411                                 goto obsolete_option;
1412                         case -9: /* "swapdata" */
1413                         case -10: /* "bswap" */
1414                                 drive->bswap = 1;
1415                                 goto done;
1416                         case -11: /* noflush */
1417                                 drive->noflush = 1;
1418                                 goto done;
1419                         case -12: /* "remap" */
1420                                 drive->remap_0_to_1 = 1;
1421                                 goto done;
1422                         case -13: /* "remap63" */
1423                                 drive->sect0 = 63;
1424                                 goto done;
1425                         case -14: /* "scsi" */
1426                                 drive->scsi = 1;
1427                                 goto done;
1428                         case 3: /* cyl,head,sect */
1429                                 drive->media    = ide_disk;
1430                                 drive->ready_stat = READY_STAT;
1431                                 drive->cyl      = drive->bios_cyl  = vals[0];
1432                                 drive->head     = drive->bios_head = vals[1];
1433                                 drive->sect     = drive->bios_sect = vals[2];
1434                                 drive->present  = 1;
1435                                 drive->forced_geom = 1;
1436                                 hwif->noprobe = 0;
1437                                 goto done;
1438                         default:
1439                                 goto bad_option;
1440                 }
1441         }
1442
1443         if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
1444                 goto bad_option;
1445         /*
1446          * Look for bus speed option:  "idebus="
1447          */
1448         if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
1449                 if (match_parm(&s[6], NULL, vals, 1) != 1)
1450                         goto bad_option;
1451                 if (vals[0] >= 20 && vals[0] <= 66) {
1452                         idebus_parameter = vals[0];
1453                 } else
1454                         printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
1455                 goto done;
1456         }
1457         /*
1458          * Look for interface options:  "idex="
1459          */
1460         if (s[3] >= '0' && s[3] <= max_hwif) {
1461                 /*
1462                  * Be VERY CAREFUL changing this: note hardcoded indexes below
1463                  * (-8, -9, -10) are reserved to ease the hardcoding.
1464                  */
1465                 static const char *ide_words[] = {
1466                         "noprobe", "serialize", "minus3", "minus4",
1467                         "reset", "dma", "ata66", "minus8", "minus9",
1468                         "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
1469                         "dtc2278", "umc8672", "ali14xx", NULL };
1470                 hw = s[3] - '0';
1471                 hwif = &ide_hwifs[hw];
1472                 i = match_parm(&s[4], ide_words, vals, 3);
1473
1474                 /*
1475                  * Cryptic check to ensure chipset not already set for hwif.
1476                  * Note: we can't depend on hwif->chipset here.
1477                  */
1478                 if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
1479                         /* chipset already specified */
1480                         if (is_chipset_set[hw])
1481                                 goto bad_option;
1482                         if (i > -18 && i <= -11) {
1483                                 /* these drivers are for "ide0=" only */
1484                                 if (hw != 0)
1485                                         goto bad_hwif;
1486                                 /* chipset already specified for 2nd port */
1487                                 if (is_chipset_set[hw+1])
1488                                         goto bad_option;
1489                         }
1490                         is_chipset_set[hw] = 1;
1491                         printk("\n");
1492                 }
1493
1494                 switch (i) {
1495 #ifdef CONFIG_BLK_DEV_ALI14XX
1496                         case -17: /* "ali14xx" */
1497                                 probe_ali14xx = 1;
1498                                 goto done;
1499 #endif
1500 #ifdef CONFIG_BLK_DEV_UMC8672
1501                         case -16: /* "umc8672" */
1502                                 probe_umc8672 = 1;
1503                                 goto done;
1504 #endif
1505 #ifdef CONFIG_BLK_DEV_DTC2278
1506                         case -15: /* "dtc2278" */
1507                                 probe_dtc2278 = 1;
1508                                 goto done;
1509 #endif
1510 #ifdef CONFIG_BLK_DEV_CMD640
1511                         case -14: /* "cmd640_vlb" */
1512                         {
1513                                 extern int cmd640_vlb; /* flag for cmd640.c */
1514                                 cmd640_vlb = 1;
1515                                 goto done;
1516                         }
1517 #endif
1518 #ifdef CONFIG_BLK_DEV_HT6560B
1519                         case -13: /* "ht6560b" */
1520                                 probe_ht6560b = 1;
1521                                 goto done;
1522 #endif
1523 #ifdef CONFIG_BLK_DEV_QD65XX
1524                         case -12: /* "qd65xx" */
1525                                 probe_qd65xx = 1;
1526                                 goto done;
1527 #endif
1528 #ifdef CONFIG_BLK_DEV_4DRIVES
1529                         case -11: /* "four" drives on one set of ports */
1530                         {
1531                                 ide_hwif_t *mate = &ide_hwifs[hw^1];
1532                                 mate->drives[0].select.all ^= 0x20;
1533                                 mate->drives[1].select.all ^= 0x20;
1534                                 hwif->chipset = mate->chipset = ide_4drives;
1535                                 mate->irq = hwif->irq;
1536                                 memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
1537                                 hwif->mate = mate;
1538                                 mate->mate = hwif;
1539                                 hwif->serialized = mate->serialized = 1;
1540                                 goto obsolete_option;
1541                         }
1542 #endif /* CONFIG_BLK_DEV_4DRIVES */
1543                         case -10: /* minus10 */
1544                         case -9: /* minus9 */
1545                         case -8: /* minus8 */
1546                         case -4:
1547                         case -3:
1548                                 goto bad_option;
1549                         case -7: /* ata66 */
1550 #ifdef CONFIG_BLK_DEV_IDEPCI
1551                                 hwif->udma_four = 1;
1552                                 goto obsolete_option;
1553 #else
1554                                 goto bad_hwif;
1555 #endif
1556                         case -6: /* dma */
1557                                 hwif->autodma = 1;
1558                                 goto obsolete_option;
1559                         case -5: /* "reset" */
1560                                 hwif->reset = 1;
1561                                 goto obsolete_option;
1562                         case -2: /* "serialize" */
1563                                 hwif->mate = &ide_hwifs[hw^1];
1564                                 hwif->mate->mate = hwif;
1565                                 hwif->serialized = hwif->mate->serialized = 1;
1566                                 goto obsolete_option;
1567
1568                         case -1: /* "noprobe" */
1569                                 hwif->noprobe = 1;
1570                                 goto done;
1571
1572                         case 1: /* base */
1573                                 vals[1] = vals[0] + 0x206; /* default ctl */
1574                         case 2: /* base,ctl */
1575                                 vals[2] = 0;    /* default irq = probe for it */
1576                         case 3: /* base,ctl,irq */
1577                                 hwif->hw.irq = vals[2];
1578                                 ide_init_hwif_ports(&hwif->hw, (unsigned long) vals[0], (unsigned long) vals[1], &hwif->irq);
1579                                 memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
1580                                 hwif->irq      = vals[2];
1581                                 hwif->noprobe  = 0;
1582                                 hwif->chipset  = ide_forced;
1583                                 goto obsolete_option;
1584
1585                         case 0: goto bad_option;
1586                         default:
1587                                 printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
1588                                 return 1;
1589                 }
1590         }
1591 bad_option:
1592         printk(" -- BAD OPTION\n");
1593         return 1;
1594 obsolete_option:
1595         printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
1596         return 1;
1597 bad_hwif:
1598         printk("-- NOT SUPPORTED ON ide%d", hw);
1599 done:
1600         printk("\n");
1601         return 1;
1602 }
1603
1604 extern void __init pnpide_init(void);
1605 extern void __exit pnpide_exit(void);
1606 extern void __init h8300_ide_init(void);
1607
1608 /*
1609  * probe_for_hwifs() finds/initializes "known" IDE interfaces
1610  */
1611 static void __init probe_for_hwifs (void)
1612 {
1613 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1614         ide_scan_pcibus(ide_scan_direction);
1615 #endif
1616
1617 #ifdef CONFIG_ETRAX_IDE
1618         {
1619                 extern void init_e100_ide(void);
1620                 init_e100_ide();
1621         }
1622 #endif /* CONFIG_ETRAX_IDE */
1623 #ifdef CONFIG_BLK_DEV_CMD640
1624         {
1625                 extern void ide_probe_for_cmd640x(void);
1626                 ide_probe_for_cmd640x();
1627         }
1628 #endif /* CONFIG_BLK_DEV_CMD640 */
1629 #ifdef CONFIG_BLK_DEV_IDE_PMAC
1630         {
1631                 extern int pmac_ide_probe(void);
1632                 (void)pmac_ide_probe();
1633         }
1634 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
1635 #ifdef CONFIG_BLK_DEV_GAYLE
1636         {
1637                 extern void gayle_init(void);
1638                 gayle_init();
1639         }
1640 #endif /* CONFIG_BLK_DEV_GAYLE */
1641 #ifdef CONFIG_BLK_DEV_FALCON_IDE
1642         {
1643                 extern void falconide_init(void);
1644                 falconide_init();
1645         }
1646 #endif /* CONFIG_BLK_DEV_FALCON_IDE */
1647 #ifdef CONFIG_BLK_DEV_MAC_IDE
1648         {
1649                 extern void macide_init(void);
1650                 macide_init();
1651         }
1652 #endif /* CONFIG_BLK_DEV_MAC_IDE */
1653 #ifdef CONFIG_BLK_DEV_Q40IDE
1654         {
1655                 extern void q40ide_init(void);
1656                 q40ide_init();
1657         }
1658 #endif /* CONFIG_BLK_DEV_Q40IDE */
1659 #ifdef CONFIG_BLK_DEV_BUDDHA
1660         {
1661                 extern void buddha_init(void);
1662                 buddha_init();
1663         }
1664 #endif /* CONFIG_BLK_DEV_BUDDHA */
1665 #ifdef CONFIG_BLK_DEV_IDEPNP
1666         pnpide_init();
1667 #endif
1668 #ifdef CONFIG_H8300
1669         h8300_ide_init();
1670 #endif
1671 }
1672
1673 /*
1674  * Probe module
1675  */
1676
1677 EXPORT_SYMBOL(ide_lock);
1678
1679 static int ide_bus_match(struct device *dev, struct device_driver *drv)
1680 {
1681         return 1;
1682 }
1683
1684 static char *media_string(ide_drive_t *drive)
1685 {
1686         switch (drive->media) {
1687         case ide_disk:
1688                 return "disk";
1689         case ide_cdrom:
1690                 return "cdrom";
1691         case ide_tape:
1692                 return "tape";
1693         case ide_floppy:
1694                 return "floppy";
1695         case ide_optical:
1696                 return "optical";
1697         default:
1698                 return "UNKNOWN";
1699         }
1700 }
1701
1702 static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
1703 {
1704         ide_drive_t *drive = to_ide_device(dev);
1705         return sprintf(buf, "%s\n", media_string(drive));
1706 }
1707
1708 static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
1709 {
1710         ide_drive_t *drive = to_ide_device(dev);
1711         return sprintf(buf, "%s\n", drive->name);
1712 }
1713
1714 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
1715 {
1716         ide_drive_t *drive = to_ide_device(dev);
1717         return sprintf(buf, "ide:m-%s\n", media_string(drive));
1718 }
1719
1720 static struct device_attribute ide_dev_attrs[] = {
1721         __ATTR_RO(media),
1722         __ATTR_RO(drivename),
1723         __ATTR_RO(modalias),
1724         __ATTR_NULL
1725 };
1726
1727 static int ide_uevent(struct device *dev, char **envp, int num_envp,
1728                       char *buffer, int buffer_size)
1729 {
1730         ide_drive_t *drive = to_ide_device(dev);
1731         int i = 0;
1732         int length = 0;
1733
1734         add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
1735                        "MEDIA=%s", media_string(drive));
1736         add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
1737                        "DRIVENAME=%s", drive->name);
1738         add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
1739                        "MODALIAS=ide:m-%s", media_string(drive));
1740         envp[i] = NULL;
1741         return 0;
1742 }
1743
1744 static int generic_ide_probe(struct device *dev)
1745 {
1746         ide_drive_t *drive = to_ide_device(dev);
1747         ide_driver_t *drv = to_ide_driver(dev->driver);
1748
1749         return drv->probe ? drv->probe(drive) : -ENODEV;
1750 }
1751
1752 static int generic_ide_remove(struct device *dev)
1753 {
1754         ide_drive_t *drive = to_ide_device(dev);
1755         ide_driver_t *drv = to_ide_driver(dev->driver);
1756
1757         if (drv->remove)
1758                 drv->remove(drive);
1759
1760         return 0;
1761 }
1762
1763 static void generic_ide_shutdown(struct device *dev)
1764 {
1765         ide_drive_t *drive = to_ide_device(dev);
1766         ide_driver_t *drv = to_ide_driver(dev->driver);
1767
1768         if (dev->driver && drv->shutdown)
1769                 drv->shutdown(drive);
1770 }
1771
1772 struct bus_type ide_bus_type = {
1773         .name           = "ide",
1774         .match          = ide_bus_match,
1775         .uevent         = ide_uevent,
1776         .probe          = generic_ide_probe,
1777         .remove         = generic_ide_remove,
1778         .shutdown       = generic_ide_shutdown,
1779         .dev_attrs      = ide_dev_attrs,
1780         .suspend        = generic_ide_suspend,
1781         .resume         = generic_ide_resume,
1782 };
1783
1784 EXPORT_SYMBOL_GPL(ide_bus_type);
1785
1786 /*
1787  * This is gets invoked once during initialization, to set *everything* up
1788  */
1789 static int __init ide_init(void)
1790 {
1791         int ret;
1792
1793         printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
1794         system_bus_speed = ide_system_bus_speed();
1795
1796         ret = bus_register(&ide_bus_type);
1797         if (ret < 0) {
1798                 printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
1799                 return ret;
1800         }
1801
1802         init_ide_data();
1803
1804         proc_ide_create();
1805
1806 #ifdef CONFIG_BLK_DEV_ALI14XX
1807         if (probe_ali14xx)
1808                 (void)ali14xx_init();
1809 #endif
1810 #ifdef CONFIG_BLK_DEV_UMC8672
1811         if (probe_umc8672)
1812                 (void)umc8672_init();
1813 #endif
1814 #ifdef CONFIG_BLK_DEV_DTC2278
1815         if (probe_dtc2278)
1816                 (void)dtc2278_init();
1817 #endif
1818 #ifdef CONFIG_BLK_DEV_HT6560B
1819         if (probe_ht6560b)
1820                 (void)ht6560b_init();
1821 #endif
1822 #ifdef CONFIG_BLK_DEV_QD65XX
1823         if (probe_qd65xx)
1824                 (void)qd65xx_init();
1825 #endif
1826
1827         /* Probe for special PCI and other "known" interface chipsets. */
1828         probe_for_hwifs();
1829
1830         return 0;
1831 }
1832
1833 #ifdef MODULE
1834 static char *options = NULL;
1835 module_param(options, charp, 0);
1836 MODULE_LICENSE("GPL");
1837
1838 static void __init parse_options (char *line)
1839 {
1840         char *next = line;
1841
1842         if (line == NULL || !*line)
1843                 return;
1844         while ((line = next) != NULL) {
1845                 if ((next = strchr(line,' ')) != NULL)
1846                         *next++ = 0;
1847                 if (!ide_setup(line))
1848                         printk (KERN_INFO "Unknown option '%s'\n", line);
1849         }
1850 }
1851
1852 int __init init_module (void)
1853 {
1854         parse_options(options);
1855         return ide_init();
1856 }
1857
1858 void __exit cleanup_module (void)
1859 {
1860         int index;
1861
1862         for (index = 0; index < MAX_HWIFS; ++index)
1863                 ide_unregister(index);
1864
1865 #ifdef CONFIG_BLK_DEV_IDEPNP
1866         pnpide_exit();
1867 #endif
1868
1869         proc_ide_destroy();
1870
1871         bus_unregister(&ide_bus_type);
1872 }
1873
1874 #else /* !MODULE */
1875
1876 __setup("", ide_setup);
1877
1878 module_init(ide_init);
1879
1880 #endif /* MODULE */