ALSA: opl4 - Fix a wrong argument in proc write callback

[safe/jmp/linux-2.6] / drivers / hwmon / it87.c

/*
 *  it87.c - Part of lm_sensors, Linux kernel modules for hardware
 *           monitoring.
 *
 *  The IT8705F is an LPC-based Super I/O part that contains UARTs, a
 *  parallel port, an IR port, a MIDI port, a floppy controller, etc., in
 *  addition to an Environment Controller (Enhanced Hardware Monitor and
 *  Fan Controller)
 *
 *  This driver supports only the Environment Controller in the IT8705F and
 *  similar parts.  The other devices are supported by different drivers.
 *
 *  Supports: IT8705F  Super I/O chip w/LPC interface
 *            IT8712F  Super I/O chip w/LPC interface
 *            IT8716F  Super I/O chip w/LPC interface
 *            IT8718F  Super I/O chip w/LPC interface
 *            IT8720F  Super I/O chip w/LPC interface
 *            IT8726F  Super I/O chip w/LPC interface
 *            Sis950   A clone of the IT8705F
 *
 *  Copyright (C) 2001 Chris Gauthron
 *  Copyright (C) 2005-2010 Jean Delvare <khali@linux-fr.org>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/string.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>

#define DRVNAME "it87"

enum chips { it87, it8712, it8716, it8718, it8720 };

static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");

static struct platform_device *pdev;

#define REG     0x2e    /* The register to read/write */
#define DEV     0x07    /* Register: Logical device select */
#define VAL     0x2f    /* The value to read/write */
#define PME     0x04    /* The device with the fan registers in it */

/* The device with the IT8718F/IT8720F VID value in it */
#define GPIO    0x07

#define DEVID   0x20    /* Register: Device ID */
#define DEVREV  0x22    /* Register: Device Revision */

static inline int
superio_inb(int reg)
{
        outb(reg, REG);
        return inb(VAL);
}

static int superio_inw(int reg)
{
        int val;
        outb(reg++, REG);
        val = inb(VAL) << 8;
        outb(reg, REG);
        val |= inb(VAL);
        return val;
}

static inline void
superio_select(int ldn)
{
        outb(DEV, REG);
        outb(ldn, VAL);
}

static inline void
superio_enter(void)
{
        outb(0x87, REG);
        outb(0x01, REG);
        outb(0x55, REG);
        outb(0x55, REG);
}

static inline void
superio_exit(void)
{
        outb(0x02, REG);
        outb(0x02, VAL);
}

/* Logical device 4 registers */
#define IT8712F_DEVID 0x8712
#define IT8705F_DEVID 0x8705
#define IT8716F_DEVID 0x8716
#define IT8718F_DEVID 0x8718
#define IT8720F_DEVID 0x8720
#define IT8726F_DEVID 0x8726
#define IT87_ACT_REG  0x30
#define IT87_BASE_REG 0x60

/* Logical device 7 registers (IT8712F and later) */
#define IT87_SIO_GPIO3_REG      0x27
#define IT87_SIO_GPIO5_REG      0x29
#define IT87_SIO_PINX2_REG      0x2c    /* Pin selection */
#define IT87_SIO_VID_REG        0xfc    /* VID value */
#define IT87_SIO_BEEP_PIN_REG   0xf6    /* Beep pin mapping */

/* Update battery voltage after every reading if true */
static int update_vbat;

/* Not all BIOSes properly configure the PWM registers */
static int fix_pwm_polarity;

/* Many IT87 constants specified below */

/* Length of ISA address segment */
#define IT87_EXTENT 8

/* Length of ISA address segment for Environmental Controller */
#define IT87_EC_EXTENT 2

/* Offset of EC registers from ISA base address */
#define IT87_EC_OFFSET 5

/* Where are the ISA address/data registers relative to the EC base address */
#define IT87_ADDR_REG_OFFSET 0
#define IT87_DATA_REG_OFFSET 1

/*----- The IT87 registers -----*/

#define IT87_REG_CONFIG        0x00

#define IT87_REG_ALARM1        0x01
#define IT87_REG_ALARM2        0x02
#define IT87_REG_ALARM3        0x03

/* The IT8718F and IT8720F have the VID value in a different register, in
   Super-I/O configuration space. */
#define IT87_REG_VID           0x0a
/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
   for fan divisors. Later IT8712F revisions must use 16-bit tachometer
   mode. */
#define IT87_REG_FAN_DIV       0x0b
#define IT87_REG_FAN_16BIT     0x0c

/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */

static const u8 IT87_REG_FAN[]          = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
static const u8 IT87_REG_FAN_MIN[]      = { 0x10, 0x11, 0x12, 0x84, 0x86 };
static const u8 IT87_REG_FANX[]         = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
static const u8 IT87_REG_FANX_MIN[]     = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL       0x14
#define IT87_REG_PWM(nr)       (0x15 + (nr))

#define IT87_REG_VIN(nr)       (0x20 + (nr))
#define IT87_REG_TEMP(nr)      (0x29 + (nr))

#define IT87_REG_VIN_MAX(nr)   (0x30 + (nr) * 2)
#define IT87_REG_VIN_MIN(nr)   (0x31 + (nr) * 2)
#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
#define IT87_REG_TEMP_LOW(nr)  (0x41 + (nr) * 2)

#define IT87_REG_VIN_ENABLE    0x50
#define IT87_REG_TEMP_ENABLE   0x51
#define IT87_REG_BEEP_ENABLE   0x5c

#define IT87_REG_CHIPID        0x58

#define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
#define IT87_REG_AUTO_PWM(nr, i)  (0x65 + (nr) * 8 + (i))

#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
#define IN_FROM_REG(val) ((val) * 16)

static inline u8 FAN_TO_REG(long rpm, int div)
{
        if (rpm == 0)
                return 255;
        rpm = SENSORS_LIMIT(rpm, 1, 1000000);
        return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
                             254);
}

static inline u16 FAN16_TO_REG(long rpm)
{
        if (rpm == 0)
                return 0xffff;
        return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
}

#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
/* The divider is fixed to 2 in 16-bit mode */
#define FAN16_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:1350000/((val)*2))

#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
                                        ((val)+500)/1000),-128,127))
#define TEMP_FROM_REG(val) ((val) * 1000)

#define PWM_TO_REG(val)   ((val) >> 1)
#define PWM_FROM_REG(val) (((val)&0x7f) << 1)

static int DIV_TO_REG(int val)
{
        int answer = 0;
        while (answer < 7 && (val >>= 1))
                answer++;
        return answer;
}
#define DIV_FROM_REG(val) (1 << (val))

static const unsigned int pwm_freq[8] = {
        48000000 / 128,
        24000000 / 128,
        12000000 / 128,
        8000000 / 128,
        6000000 / 128,
        3000000 / 128,
        1500000 / 128,
        750000 / 128,
};


struct it87_sio_data {
        enum chips type;
        /* Values read from Super-I/O config space */
        u8 revision;
        u8 vid_value;
        u8 beep_pin;
        /* Features skipped based on config or DMI */
        u8 skip_vid;
        u8 skip_fan;
        u8 skip_pwm;
};

/* For each registered chip, we need to keep some data in memory.
   The structure is dynamically allocated. */
struct it87_data {
        struct device *hwmon_dev;
        enum chips type;
        u8 revision;

        unsigned short addr;
        const char *name;
        struct mutex update_lock;
        char valid;             /* !=0 if following fields are valid */
        unsigned long last_updated;     /* In jiffies */

        u8 in[9];               /* Register value */
        u8 in_max[8];           /* Register value */
        u8 in_min[8];           /* Register value */
        u8 has_fan;             /* Bitfield, fans enabled */
        u16 fan[5];             /* Register values, possibly combined */
        u16 fan_min[5];         /* Register values, possibly combined */
        s8 temp[3];             /* Register value */
        s8 temp_high[3];        /* Register value */
        s8 temp_low[3];         /* Register value */
        u8 sensor;              /* Register value */
        u8 fan_div[3];          /* Register encoding, shifted right */
        u8 vid;                 /* Register encoding, combined */
        u8 vrm;
        u32 alarms;             /* Register encoding, combined */
        u8 beeps;               /* Register encoding */
        u8 fan_main_ctrl;       /* Register value */
        u8 fan_ctl;             /* Register value */

        /* The following 3 arrays correspond to the same registers. The
         * meaning of bits 6-0 depends on the value of bit 7, and we want
         * to preserve settings on mode changes, so we have to track all
         * values separately. */
        u8 pwm_ctrl[3];         /* Register value */
        u8 pwm_duty[3];         /* Manual PWM value set by user (bit 6-0) */
        u8 pwm_temp_map[3];     /* PWM to temp. chan. mapping (bits 1-0) */

        /* Automatic fan speed control registers */
        u8 auto_pwm[3][4];      /* [nr][3] is hard-coded */
        s8 auto_temp[3][5];     /* [nr][0] is point1_temp_hyst */
};

static inline int has_16bit_fans(const struct it87_data *data)
{
        /* IT8705F Datasheet 0.4.1, 3h == Version G.
           IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
           These are the first revisions with 16bit tachometer support. */
        return (data->type == it87 && data->revision >= 0x03)
            || (data->type == it8712 && data->revision >= 0x08)
            || data->type == it8716
            || data->type == it8718
            || data->type == it8720;
}

static inline int has_old_autopwm(const struct it87_data *data)
{
        /* The old automatic fan speed control interface is implemented
           by IT8705F chips up to revision F and IT8712F chips up to
           revision G. */
        return (data->type == it87 && data->revision < 0x03)
            || (data->type == it8712 && data->revision < 0x08);
}

static int it87_probe(struct platform_device *pdev);
static int __devexit it87_remove(struct platform_device *pdev);

static int it87_read_value(struct it87_data *data, u8 reg);
static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
static struct it87_data *it87_update_device(struct device *dev);
static int it87_check_pwm(struct device *dev);
static void it87_init_device(struct platform_device *pdev);


static struct platform_driver it87_driver = {
        .driver = {
                .owner  = THIS_MODULE,
                .name   = DRVNAME,
        },
        .probe  = it87_probe,
        .remove = __devexit_p(it87_remove),
};

static ssize_t show_in(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
}

static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
}

static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
}

static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        unsigned long val;

        if (strict_strtoul(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->in_min[nr] = IN_TO_REG(val);
        it87_write_value(data, IT87_REG_VIN_MIN(nr),
                        data->in_min[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        unsigned long val;

        if (strict_strtoul(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->in_max[nr] = IN_TO_REG(val);
        it87_write_value(data, IT87_REG_VIN_MAX(nr),
                        data->in_max[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}

#define show_in_offset(offset)                                  \
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,          \
                show_in, NULL, offset);

#define limit_in_offset(offset)                                 \
static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,  \
                show_in_min, set_in_min, offset);               \
static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,  \
                show_in_max, set_in_max, offset);

show_in_offset(0);
limit_in_offset(0);
show_in_offset(1);
limit_in_offset(1);
show_in_offset(2);
limit_in_offset(2);
show_in_offset(3);
limit_in_offset(3);
show_in_offset(4);
limit_in_offset(4);
show_in_offset(5);
limit_in_offset(5);
show_in_offset(6);
limit_in_offset(6);
show_in_offset(7);
limit_in_offset(7);
show_in_offset(8);

/* 3 temperatures */
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
}
static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->temp_high[nr] = TEMP_TO_REG(val);
        it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->temp_low[nr] = TEMP_TO_REG(val);
        it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
#define show_temp_offset(offset)                                        \
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,                \
                show_temp, NULL, offset - 1);                           \
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,        \
                show_temp_max, set_temp_max, offset - 1);               \
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
                show_temp_min, set_temp_min, offset - 1);

show_temp_offset(1);
show_temp_offset(2);
show_temp_offset(3);

static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        u8 reg = data->sensor;          /* In case the value is updated while
                                           we use it */

        if (reg & (1 << nr))
                return sprintf(buf, "3\n");  /* thermal diode */
        if (reg & (8 << nr))
                return sprintf(buf, "4\n");  /* thermistor */
        return sprintf(buf, "0\n");      /* disabled */
}
static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);

        data->sensor &= ~(1 << nr);
        data->sensor &= ~(8 << nr);
        if (val == 2) { /* backwards compatibility */
                dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
                         "instead\n");
                val = 4;
        }
        /* 3 = thermal diode; 4 = thermistor; 0 = disabled */
        if (val == 3)
                data->sensor |= 1 << nr;
        else if (val == 4)
                data->sensor |= 8 << nr;
        else if (val != 0) {
                mutex_unlock(&data->update_lock);
                return -EINVAL;
        }
        it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
        mutex_unlock(&data->update_lock);
        return count;
}
#define show_sensor_offset(offset)                                      \
static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR,       \
                show_sensor, set_sensor, offset - 1);

show_sensor_offset(1);
show_sensor_offset(2);
show_sensor_offset(3);

/* 3 Fans */

static int pwm_mode(const struct it87_data *data, int nr)
{
        int ctrl = data->fan_main_ctrl & (1 << nr);

        if (ctrl == 0)                                  /* Full speed */
                return 0;
        if (data->pwm_ctrl[nr] & 0x80)                  /* Automatic mode */
                return 2;
        else                                            /* Manual mode */
                return 1;
}

static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
                                DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
                                DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
}
static ssize_t show_pwm_enable(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", pwm_mode(data, nr));
}
static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm_duty[nr]));
}
static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct it87_data *data = it87_update_device(dev);
        int index = (data->fan_ctl >> 4) & 0x07;

        return sprintf(buf, "%u\n", pwm_freq[index]);
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;
        u8 reg;

        if (strict_strtol(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        reg = it87_read_value(data, IT87_REG_FAN_DIV);
        switch (nr) {
        case 0:
                data->fan_div[nr] = reg & 0x07;
                break;
        case 1:
                data->fan_div[nr] = (reg >> 3) & 0x07;
                break;
        case 2:
                data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
                break;
        }

        data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
        it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        unsigned long val;
        int min;
        u8 old;

        if (strict_strtoul(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        old = it87_read_value(data, IT87_REG_FAN_DIV);

        /* Save fan min limit */
        min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));

        switch (nr) {
        case 0:
        case 1:
                data->fan_div[nr] = DIV_TO_REG(val);
                break;
        case 2:
                if (val < 8)
                        data->fan_div[nr] = 1;
                else
                        data->fan_div[nr] = 3;
        }
        val = old & 0x80;
        val |= (data->fan_div[0] & 0x07);
        val |= (data->fan_div[1] & 0x07) << 3;
        if (data->fan_div[2] == 3)
                val |= 0x1 << 6;
        it87_write_value(data, IT87_REG_FAN_DIV, val);

        /* Restore fan min limit */
        data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
        it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);

        mutex_unlock(&data->update_lock);
        return count;
}

/* Returns 0 if OK, -EINVAL otherwise */
static int check_trip_points(struct device *dev, int nr)
{
        const struct it87_data *data = dev_get_drvdata(dev);
        int i, err = 0;

        if (has_old_autopwm(data)) {
                for (i = 0; i < 3; i++) {
                        if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
                                err = -EINVAL;
                }
                for (i = 0; i < 2; i++) {
                        if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
                                err = -EINVAL;
                }
        }

        if (err) {
                dev_err(dev, "Inconsistent trip points, not switching to "
                        "automatic mode\n");
                dev_err(dev, "Adjust the trip points and try again\n");
        }
        return err;
}

static ssize_t set_pwm_enable(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 2)
                return -EINVAL;

        /* Check trip points before switching to automatic mode */
        if (val == 2) {
                if (check_trip_points(dev, nr) < 0)
                        return -EINVAL;
        }

        mutex_lock(&data->update_lock);

        if (val == 0) {
                int tmp;
                /* make sure the fan is on when in on/off mode */
                tmp = it87_read_value(data, IT87_REG_FAN_CTL);
                it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
                /* set on/off mode */
                data->fan_main_ctrl &= ~(1 << nr);
                it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
                                 data->fan_main_ctrl);
        } else {
                if (val == 1)                           /* Manual mode */
                        data->pwm_ctrl[nr] = data->pwm_duty[nr];
                else                                    /* Automatic mode */
                        data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
                it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
                /* set SmartGuardian mode */
                data->fan_main_ctrl |= (1 << nr);
                it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
                                 data->fan_main_ctrl);
        }

        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 255)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->pwm_duty[nr] = PWM_TO_REG(val);
        /* If we are in manual mode, write the duty cycle immediately;
         * otherwise, just store it for later use. */
        if (!(data->pwm_ctrl[nr] & 0x80)) {
                data->pwm_ctrl[nr] = data->pwm_duty[nr];
                it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
        }
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_pwm_freq(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct it87_data *data = dev_get_drvdata(dev);
        unsigned long val;
        int i;

        if (strict_strtoul(buf, 10, &val) < 0)
                return -EINVAL;

        /* Search for the nearest available frequency */
        for (i = 0; i < 7; i++) {
                if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
                        break;
        }

        mutex_lock(&data->update_lock);
        data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
        data->fan_ctl |= i << 4;
        it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
        mutex_unlock(&data->update_lock);

        return count;
}
static ssize_t show_pwm_temp_map(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = it87_update_device(dev);
        int map;

        if (data->pwm_temp_map[nr] < 3)
                map = 1 << data->pwm_temp_map[nr];
        else
                map = 0;                        /* Should never happen */
        return sprintf(buf, "%d\n", map);
}
static ssize_t set_pwm_temp_map(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;

        struct it87_data *data = dev_get_drvdata(dev);
        long val;
        u8 reg;

        /* This check can go away if we ever support automatic fan speed
           control on newer chips. */
        if (!has_old_autopwm(data)) {
                dev_notice(dev, "Mapping change disabled for safety reasons\n");
                return -EINVAL;
        }

        if (strict_strtol(buf, 10, &val) < 0)
                return -EINVAL;

        switch (val) {
        case (1 << 0):
                reg = 0x00;
                break;
        case (1 << 1):
                reg = 0x01;
                break;
        case (1 << 2):
                reg = 0x02;
                break;
        default:
                return -EINVAL;
        }

        mutex_lock(&data->update_lock);
        data->pwm_temp_map[nr] = reg;
        /* If we are in automatic mode, write the temp mapping immediately;
         * otherwise, just store it for later use. */
        if (data->pwm_ctrl[nr] & 0x80) {
                data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
                it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
        }
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_auto_pwm(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct it87_data *data = it87_update_device(dev);
        struct sensor_device_attribute_2 *sensor_attr =
                        to_sensor_dev_attr_2(attr);
        int nr = sensor_attr->nr;
        int point = sensor_attr->index;

        return sprintf(buf, "%d\n", PWM_FROM_REG(data->auto_pwm[nr][point]));
}

static ssize_t set_auto_pwm(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct it87_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute_2 *sensor_attr =
                        to_sensor_dev_attr_2(attr);
        int nr = sensor_attr->nr;
        int point = sensor_attr->index;
        long val;

        if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 255)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->auto_pwm[nr][point] = PWM_TO_REG(val);
        it87_write_value(data, IT87_REG_AUTO_PWM(nr, point),
                         data->auto_pwm[nr][point]);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_auto_temp(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct it87_data *data = it87_update_device(dev);
        struct sensor_device_attribute_2 *sensor_attr =
                        to_sensor_dev_attr_2(attr);
        int nr = sensor_attr->nr;
        int point = sensor_attr->index;

        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->auto_temp[nr][point]));
}

static ssize_t set_auto_temp(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct it87_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute_2 *sensor_attr =
                        to_sensor_dev_attr_2(attr);
        int nr = sensor_attr->nr;
        int point = sensor_attr->index;
        long val;

        if (strict_strtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->auto_temp[nr][point] = TEMP_TO_REG(val);
        it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point),
                         data->auto_temp[nr][point]);
        mutex_unlock(&data->update_lock);
        return count;
}

#define show_fan_offset(offset)                                 \
static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,         \
                show_fan, NULL, offset - 1);                    \
static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
                show_fan_min, set_fan_min, offset - 1);         \
static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
                show_fan_div, set_fan_div, offset - 1);

show_fan_offset(1);
show_fan_offset(2);
show_fan_offset(3);

#define show_pwm_offset(offset)                                         \
static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,      \
                show_pwm_enable, set_pwm_enable, offset - 1);           \
static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,               \
                show_pwm, set_pwm, offset - 1);                         \
static DEVICE_ATTR(pwm##offset##_freq,                                  \
                (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO),            \
                show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL));    \
static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels_temp,             \
                S_IRUGO | S_IWUSR, show_pwm_temp_map, set_pwm_temp_map, \
                offset - 1);                                            \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_pwm,              \
                S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm,         \
                offset - 1, 0);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_pwm,              \
                S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm,         \
                offset - 1, 1);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_pwm,              \
                S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm,         \
                offset - 1, 2);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_pwm,              \
                S_IRUGO, show_auto_pwm, NULL, offset - 1, 3);           \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp,             \
                S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,       \
                offset - 1, 1);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp_hyst,        \
                S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,       \
                offset - 1, 0);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_temp,             \
                S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,       \
                offset - 1, 2);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_temp,             \
                S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,       \
                offset - 1, 3);                                         \
static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_temp,             \
                S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,       \
                offset - 1, 4);

show_pwm_offset(1);
show_pwm_offset(2);
show_pwm_offset(3);

/* A different set of callbacks for 16-bit fans */
static ssize_t show_fan16(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr]));
}

static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr]));
}

static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->fan_min[nr] = FAN16_TO_REG(val);
        it87_write_value(data, IT87_REG_FAN_MIN[nr],
                         data->fan_min[nr] & 0xff);
        it87_write_value(data, IT87_REG_FANX_MIN[nr],
                         data->fan_min[nr] >> 8);
        mutex_unlock(&data->update_lock);
        return count;
}

/* We want to use the same sysfs file names as 8-bit fans, but we need
   different variable names, so we have to use SENSOR_ATTR instead of
   SENSOR_DEVICE_ATTR. */
#define show_fan16_offset(offset) \
static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \
        = SENSOR_ATTR(fan##offset##_input, S_IRUGO,             \
                show_fan16, NULL, offset - 1);                  \
static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \
        = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,     \
                show_fan16_min, set_fan16_min, offset - 1)

show_fan16_offset(1);
show_fan16_offset(2);
show_fan16_offset(3);
show_fan16_offset(4);
show_fan16_offset(5);

/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);

static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        int bitnr = to_sensor_dev_attr(attr)->index;
        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);

static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        int bitnr = to_sensor_dev_attr(attr)->index;
        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
}
static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        int bitnr = to_sensor_dev_attr(attr)->index;
        struct it87_data *data = dev_get_drvdata(dev);
        long val;

        if (strict_strtol(buf, 10, &val) < 0
         || (val != 0 && val != 1))
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
        if (val)
                data->beeps |= (1 << bitnr);
        else
                data->beeps &= ~(1 << bitnr);
        it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
        mutex_unlock(&data->update_lock);
        return count;
}

static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
                          show_beep, set_beep, 1);
static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
/* fanX_beep writability is set later */
static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
                          show_beep, set_beep, 2);
static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);

static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct it87_data *data = dev_get_drvdata(dev);
        return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
                const char *buf, size_t count)
{
        struct it87_data *data = dev_get_drvdata(dev);
        unsigned long val;

        if (strict_strtoul(buf, 10, &val) < 0)
                return -EINVAL;

        data->vrm = val;

        return count;
}
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);

static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
                char *buf)
{
        struct it87_data *data = it87_update_device(dev);
        return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);

static ssize_t show_name(struct device *dev, struct device_attribute
                         *devattr, char *buf)
{
        struct it87_data *data = dev_get_drvdata(dev);
        return sprintf(buf, "%s\n", data->name);
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);

static struct attribute *it87_attributes[] = {
        &sensor_dev_attr_in0_input.dev_attr.attr,
        &sensor_dev_attr_in1_input.dev_attr.attr,
        &sensor_dev_attr_in2_input.dev_attr.attr,
        &sensor_dev_attr_in3_input.dev_attr.attr,
        &sensor_dev_attr_in4_input.dev_attr.attr,
        &sensor_dev_attr_in5_input.dev_attr.attr,
        &sensor_dev_attr_in6_input.dev_attr.attr,
        &sensor_dev_attr_in7_input.dev_attr.attr,
        &sensor_dev_attr_in8_input.dev_attr.attr,
        &sensor_dev_attr_in0_min.dev_attr.attr,
        &sensor_dev_attr_in1_min.dev_attr.attr,
        &sensor_dev_attr_in2_min.dev_attr.attr,
        &sensor_dev_attr_in3_min.dev_attr.attr,
        &sensor_dev_attr_in4_min.dev_attr.attr,
        &sensor_dev_attr_in5_min.dev_attr.attr,
        &sensor_dev_attr_in6_min.dev_attr.attr,
        &sensor_dev_attr_in7_min.dev_attr.attr,
        &sensor_dev_attr_in0_max.dev_attr.attr,
        &sensor_dev_attr_in1_max.dev_attr.attr,
        &sensor_dev_attr_in2_max.dev_attr.attr,
        &sensor_dev_attr_in3_max.dev_attr.attr,
        &sensor_dev_attr_in4_max.dev_attr.attr,
        &sensor_dev_attr_in5_max.dev_attr.attr,
        &sensor_dev_attr_in6_max.dev_attr.attr,
        &sensor_dev_attr_in7_max.dev_attr.attr,
        &sensor_dev_attr_in0_alarm.dev_attr.attr,
        &sensor_dev_attr_in1_alarm.dev_attr.attr,
        &sensor_dev_attr_in2_alarm.dev_attr.attr,
        &sensor_dev_attr_in3_alarm.dev_attr.attr,
        &sensor_dev_attr_in4_alarm.dev_attr.attr,
        &sensor_dev_attr_in5_alarm.dev_attr.attr,
        &sensor_dev_attr_in6_alarm.dev_attr.attr,
        &sensor_dev_attr_in7_alarm.dev_attr.attr,

        &sensor_dev_attr_temp1_input.dev_attr.attr,
        &sensor_dev_attr_temp2_input.dev_attr.attr,
        &sensor_dev_attr_temp3_input.dev_attr.attr,
        &sensor_dev_attr_temp1_max.dev_attr.attr,
        &sensor_dev_attr_temp2_max.dev_attr.attr,
        &sensor_dev_attr_temp3_max.dev_attr.attr,
        &sensor_dev_attr_temp1_min.dev_attr.attr,
        &sensor_dev_attr_temp2_min.dev_attr.attr,
        &sensor_dev_attr_temp3_min.dev_attr.attr,
        &sensor_dev_attr_temp1_type.dev_attr.attr,
        &sensor_dev_attr_temp2_type.dev_attr.attr,
        &sensor_dev_attr_temp3_type.dev_attr.attr,
        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
        &sensor_dev_attr_temp2_alarm.dev_attr.attr,
        &sensor_dev_attr_temp3_alarm.dev_attr.attr,

        &dev_attr_alarms.attr,
        &dev_attr_name.attr,
        NULL
};

static const struct attribute_group it87_group = {
        .attrs = it87_attributes,
};

static struct attribute *it87_attributes_beep[] = {
        &sensor_dev_attr_in0_beep.dev_attr.attr,
        &sensor_dev_attr_in1_beep.dev_attr.attr,
        &sensor_dev_attr_in2_beep.dev_attr.attr,
        &sensor_dev_attr_in3_beep.dev_attr.attr,
        &sensor_dev_attr_in4_beep.dev_attr.attr,
        &sensor_dev_attr_in5_beep.dev_attr.attr,
        &sensor_dev_attr_in6_beep.dev_attr.attr,
        &sensor_dev_attr_in7_beep.dev_attr.attr,

        &sensor_dev_attr_temp1_beep.dev_attr.attr,
        &sensor_dev_attr_temp2_beep.dev_attr.attr,
        &sensor_dev_attr_temp3_beep.dev_attr.attr,
        NULL
};

static const struct attribute_group it87_group_beep = {
        .attrs = it87_attributes_beep,
};

static struct attribute *it87_attributes_fan16[5][3+1] = { {
        &sensor_dev_attr_fan1_input16.dev_attr.attr,
        &sensor_dev_attr_fan1_min16.dev_attr.attr,
        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_fan2_input16.dev_attr.attr,
        &sensor_dev_attr_fan2_min16.dev_attr.attr,
        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_fan3_input16.dev_attr.attr,
        &sensor_dev_attr_fan3_min16.dev_attr.attr,
        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_fan4_input16.dev_attr.attr,
        &sensor_dev_attr_fan4_min16.dev_attr.attr,
        &sensor_dev_attr_fan4_alarm.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_fan5_input16.dev_attr.attr,
        &sensor_dev_attr_fan5_min16.dev_attr.attr,
        &sensor_dev_attr_fan5_alarm.dev_attr.attr,
        NULL
} };

static const struct attribute_group it87_group_fan16[5] = {
        { .attrs = it87_attributes_fan16[0] },
        { .attrs = it87_attributes_fan16[1] },
        { .attrs = it87_attributes_fan16[2] },
        { .attrs = it87_attributes_fan16[3] },
        { .attrs = it87_attributes_fan16[4] },
};

static struct attribute *it87_attributes_fan[3][4+1] = { {
        &sensor_dev_attr_fan1_input.dev_attr.attr,
        &sensor_dev_attr_fan1_min.dev_attr.attr,
        &sensor_dev_attr_fan1_div.dev_attr.attr,
        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_fan2_input.dev_attr.attr,
        &sensor_dev_attr_fan2_min.dev_attr.attr,
        &sensor_dev_attr_fan2_div.dev_attr.attr,
        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_fan3_input.dev_attr.attr,
        &sensor_dev_attr_fan3_min.dev_attr.attr,
        &sensor_dev_attr_fan3_div.dev_attr.attr,
        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
        NULL
} };

static const struct attribute_group it87_group_fan[3] = {
        { .attrs = it87_attributes_fan[0] },
        { .attrs = it87_attributes_fan[1] },
        { .attrs = it87_attributes_fan[2] },
};

static const struct attribute_group *
it87_get_fan_group(const struct it87_data *data)
{
        return has_16bit_fans(data) ? it87_group_fan16 : it87_group_fan;
}

static struct attribute *it87_attributes_pwm[3][4+1] = { {
        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
        &sensor_dev_attr_pwm1.dev_attr.attr,
        &dev_attr_pwm1_freq.attr,
        &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
        &sensor_dev_attr_pwm2.dev_attr.attr,
        &dev_attr_pwm2_freq.attr,
        &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
        &sensor_dev_attr_pwm3.dev_attr.attr,
        &dev_attr_pwm3_freq.attr,
        &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
        NULL
} };

static const struct attribute_group it87_group_pwm[3] = {
        { .attrs = it87_attributes_pwm[0] },
        { .attrs = it87_attributes_pwm[1] },
        { .attrs = it87_attributes_pwm[2] },
};

static struct attribute *it87_attributes_autopwm[3][9+1] = { {
        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
        NULL
}, {
        &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
        NULL
} };

static const struct attribute_group it87_group_autopwm[3] = {
        { .attrs = it87_attributes_autopwm[0] },
        { .attrs = it87_attributes_autopwm[1] },
        { .attrs = it87_attributes_autopwm[2] },
};

static struct attribute *it87_attributes_fan_beep[] = {
        &sensor_dev_attr_fan1_beep.dev_attr.attr,
        &sensor_dev_attr_fan2_beep.dev_attr.attr,
        &sensor_dev_attr_fan3_beep.dev_attr.attr,
        &sensor_dev_attr_fan4_beep.dev_attr.attr,
        &sensor_dev_attr_fan5_beep.dev_attr.attr,
};

static struct attribute *it87_attributes_vid[] = {
        &dev_attr_vrm.attr,
        &dev_attr_cpu0_vid.attr,
        NULL
};

static const struct attribute_group it87_group_vid = {
        .attrs = it87_attributes_vid,
};

/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(unsigned short *address,
        struct it87_sio_data *sio_data)
{
        int err = -ENODEV;
        u16 chip_type;
        const char *board_vendor, *board_name;

        superio_enter();
        chip_type = force_id ? force_id : superio_inw(DEVID);

        switch (chip_type) {
        case IT8705F_DEVID:
                sio_data->type = it87;
                break;
        case IT8712F_DEVID:
                sio_data->type = it8712;
                break;
        case IT8716F_DEVID:
        case IT8726F_DEVID:
                sio_data->type = it8716;
                break;
        case IT8718F_DEVID:
                sio_data->type = it8718;
                break;
        case IT8720F_DEVID:
                sio_data->type = it8720;
                break;
        case 0xffff:    /* No device at all */
                goto exit;
        default:
                pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
                         chip_type);
                goto exit;
        }

        superio_select(PME);
        if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
                pr_info("it87: Device not activated, skipping\n");
                goto exit;
        }

        *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
        if (*address == 0) {
                pr_info("it87: Base address not set, skipping\n");
                goto exit;
        }

        err = 0;
        sio_data->revision = superio_inb(DEVREV) & 0x0f;
        pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
                chip_type, *address, sio_data->revision);

        /* Read GPIO config and VID value from LDN 7 (GPIO) */
        if (sio_data->type == it87) {
                /* The IT8705F doesn't have VID pins at all */
                sio_data->skip_vid = 1;

                /* The IT8705F has a different LD number for GPIO */
                superio_select(5);
                sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
        } else {
                int reg;

                superio_select(GPIO);
                /* We need at least 4 VID pins */
                reg = superio_inb(IT87_SIO_GPIO3_REG);
                if (reg & 0x0f) {
                        pr_info("it87: VID is disabled (pins used for GPIO)\n");
                        sio_data->skip_vid = 1;
                }

                /* Check if fan3 is there or not */
                if (reg & (1 << 6))
                        sio_data->skip_pwm |= (1 << 2);
                if (reg & (1 << 7))
                        sio_data->skip_fan |= (1 << 2);

                /* Check if fan2 is there or not */
                reg = superio_inb(IT87_SIO_GPIO5_REG);
                if (reg & (1 << 1))
                        sio_data->skip_pwm |= (1 << 1);
                if (reg & (1 << 2))
                        sio_data->skip_fan |= (1 << 1);

                if ((sio_data->type == it8718 || sio_data->type == it8720)
                 && !(sio_data->skip_vid))
                        sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);

                reg = superio_inb(IT87_SIO_PINX2_REG);
                if (reg & (1 << 0))
                        pr_info("it87: in3 is VCC (+5V)\n");
                if (reg & (1 << 1))
                        pr_info("it87: in7 is VCCH (+5V Stand-By)\n");

                sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
        }
        if (sio_data->beep_pin)
                pr_info("it87: Beeping is supported\n");

        /* Disable specific features based on DMI strings */
        board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
        board_name = dmi_get_system_info(DMI_BOARD_NAME);
        if (board_vendor && board_name) {
                if (strcmp(board_vendor, "nVIDIA") == 0
                 && strcmp(board_name, "FN68PT") == 0) {
                        /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
                           connected to a fan, but to something else. One user
                           has reported instant system power-off when changing
                           the PWM2 duty cycle, so we disable it.
                           I use the board name string as the trigger in case
                           the same board is ever used in other systems. */
                        pr_info("it87: Disabling pwm2 due to "
                                "hardware constraints\n");
                        sio_data->skip_pwm = (1 << 1);
                }
        }

exit:
        superio_exit();
        return err;
}

static void it87_remove_files(struct device *dev)
{
        struct it87_data *data = platform_get_drvdata(pdev);
        struct it87_sio_data *sio_data = dev->platform_data;
        const struct attribute_group *fan_group = it87_get_fan_group(data);
        int i;

        sysfs_remove_group(&dev->kobj, &it87_group);
        if (sio_data->beep_pin)
                sysfs_remove_group(&dev->kobj, &it87_group_beep);
        for (i = 0; i < 5; i++) {
                if (!(data->has_fan & (1 << i)))
                        continue;
                sysfs_remove_group(&dev->kobj, &fan_group[i]);
                if (sio_data->beep_pin)
                        sysfs_remove_file(&dev->kobj,
                                          it87_attributes_fan_beep[i]);
        }
        for (i = 0; i < 3; i++) {
                if (sio_data->skip_pwm & (1 << 0))
                        continue;
                sysfs_remove_group(&dev->kobj, &it87_group_pwm[i]);
                if (has_old_autopwm(data))
                        sysfs_remove_group(&dev->kobj,
                                           &it87_group_autopwm[i]);
        }
        if (!sio_data->skip_vid)
                sysfs_remove_group(&dev->kobj, &it87_group_vid);
}

static int __devinit it87_probe(struct platform_device *pdev)
{
        struct it87_data *data;
        struct resource *res;
        struct device *dev = &pdev->dev;
        struct it87_sio_data *sio_data = dev->platform_data;
        const struct attribute_group *fan_group;
        int err = 0, i;
        int enable_pwm_interface;
        int fan_beep_need_rw;
        static const char *names[] = {
                "it87",
                "it8712",
                "it8716",
                "it8718",
                "it8720",
        };

        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
        if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) {
                dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
                        (unsigned long)res->start,
                        (unsigned long)(res->start + IT87_EC_EXTENT - 1));
                err = -EBUSY;
                goto ERROR0;
        }

        data = kzalloc(sizeof(struct it87_data), GFP_KERNEL);
        if (!data) {
                err = -ENOMEM;
                goto ERROR1;
        }

        data->addr = res->start;
        data->type = sio_data->type;
        data->revision = sio_data->revision;
        data->name = names[sio_data->type];

        /* Now, we do the remaining detection. */
        if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
         || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
                err = -ENODEV;
                goto ERROR2;
        }

        platform_set_drvdata(pdev, data);

        mutex_init(&data->update_lock);

        /* Check PWM configuration */
        enable_pwm_interface = it87_check_pwm(dev);

        /* Initialize the IT87 chip */
        it87_init_device(pdev);

        /* Register sysfs hooks */
        err = sysfs_create_group(&dev->kobj, &it87_group);
        if (err)
                goto ERROR2;

        if (sio_data->beep_pin) {
                err = sysfs_create_group(&dev->kobj, &it87_group_beep);
                if (err)
                        goto ERROR4;
        }

        /* Do not create fan files for disabled fans */
        fan_group = it87_get_fan_group(data);
        fan_beep_need_rw = 1;
        for (i = 0; i < 5; i++) {
                if (!(data->has_fan & (1 << i)))
                        continue;
                err = sysfs_create_group(&dev->kobj, &fan_group[i]);
                if (err)
                        goto ERROR4;

                if (sio_data->beep_pin) {
                        err = sysfs_create_file(&dev->kobj,
                                                it87_attributes_fan_beep[i]);
                        if (err)
                                goto ERROR4;
                        if (!fan_beep_need_rw)
                                continue;

                        /* As we have a single beep enable bit for all fans,
                         * only the first enabled fan has a writable attribute
                         * for it. */
                        if (sysfs_chmod_file(&dev->kobj,
                                             it87_attributes_fan_beep[i],
                                             S_IRUGO | S_IWUSR))
                                dev_dbg(dev, "chmod +w fan%d_beep failed\n",
                                        i + 1);
                        fan_beep_need_rw = 0;
                }
        }

        if (enable_pwm_interface) {
                for (i = 0; i < 3; i++) {
                        if (sio_data->skip_pwm & (1 << i))
                                continue;
                        err = sysfs_create_group(&dev->kobj,
                                                 &it87_group_pwm[i]);
                        if (err)
                                goto ERROR4;

                        if (!has_old_autopwm(data))
                                continue;
                        err = sysfs_create_group(&dev->kobj,
                                                 &it87_group_autopwm[i]);
                        if (err)
                                goto ERROR4;
                }
        }

        if (!sio_data->skip_vid) {
                data->vrm = vid_which_vrm();
                /* VID reading from Super-I/O config space if available */
                data->vid = sio_data->vid_value;
                err = sysfs_create_group(&dev->kobj, &it87_group_vid);
                if (err)
                        goto ERROR4;
        }

        data->hwmon_dev = hwmon_device_register(dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto ERROR4;
        }

        return 0;

ERROR4:
        it87_remove_files(dev);
ERROR2:
        platform_set_drvdata(pdev, NULL);
        kfree(data);
ERROR1:
        release_region(res->start, IT87_EC_EXTENT);
ERROR0:
        return err;
}

static int __devexit it87_remove(struct platform_device *pdev)
{
        struct it87_data *data = platform_get_drvdata(pdev);

        hwmon_device_unregister(data->hwmon_dev);
        it87_remove_files(&pdev->dev);

        release_region(data->addr, IT87_EC_EXTENT);
        platform_set_drvdata(pdev, NULL);
        kfree(data);

        return 0;
}

/* Must be called with data->update_lock held, except during initialization.
   We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
   would slow down the IT87 access and should not be necessary. */
static int it87_read_value(struct it87_data *data, u8 reg)
{
        outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
        return inb_p(data->addr + IT87_DATA_REG_OFFSET);
}

/* Must be called with data->update_lock held, except during initialization.
   We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
   would slow down the IT87 access and should not be necessary. */
static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
{
        outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
        outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
}

/* Return 1 if and only if the PWM interface is safe to use */
static int __devinit it87_check_pwm(struct device *dev)
{
        struct it87_data *data = dev_get_drvdata(dev);
        /* Some BIOSes fail to correctly configure the IT87 fans. All fans off
         * and polarity set to active low is sign that this is the case so we
         * disable pwm control to protect the user. */
        int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
        if ((tmp & 0x87) == 0) {
                if (fix_pwm_polarity) {
                        /* The user asks us to attempt a chip reconfiguration.
                         * This means switching to active high polarity and
                         * inverting all fan speed values. */
                        int i;
                        u8 pwm[3];

                        for (i = 0; i < 3; i++)
                                pwm[i] = it87_read_value(data,
                                                         IT87_REG_PWM(i));

                        /* If any fan is in automatic pwm mode, the polarity
                         * might be correct, as suspicious as it seems, so we
                         * better don't change anything (but still disable the
                         * PWM interface). */
                        if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
                                dev_info(dev, "Reconfiguring PWM to "
                                         "active high polarity\n");
                                it87_write_value(data, IT87_REG_FAN_CTL,
                                                 tmp | 0x87);
                                for (i = 0; i < 3; i++)
                                        it87_write_value(data,
                                                         IT87_REG_PWM(i),
                                                         0x7f & ~pwm[i]);
                                return 1;
                        }

                        dev_info(dev, "PWM configuration is "
                                 "too broken to be fixed\n");
                }

                dev_info(dev, "Detected broken BIOS "
                         "defaults, disabling PWM interface\n");
                return 0;
        } else if (fix_pwm_polarity) {
                dev_info(dev, "PWM configuration looks "
                         "sane, won't touch\n");
        }

        return 1;
}

/* Called when we have found a new IT87. */
static void __devinit it87_init_device(struct platform_device *pdev)
{
        struct it87_sio_data *sio_data = pdev->dev.platform_data;
        struct it87_data *data = platform_get_drvdata(pdev);
        int tmp, i;
        u8 mask;

        /* For each PWM channel:
         * - If it is in automatic mode, setting to manual mode should set
         *   the fan to full speed by default.
         * - If it is in manual mode, we need a mapping to temperature
         *   channels to use when later setting to automatic mode later.
         *   Use a 1:1 mapping by default (we are clueless.)
         * In both cases, the value can (and should) be changed by the user
         * prior to switching to a different mode. */
        for (i = 0; i < 3; i++) {
                data->pwm_temp_map[i] = i;
                data->pwm_duty[i] = 0x7f;       /* Full speed */
                data->auto_pwm[i][3] = 0x7f;    /* Full speed, hard-coded */
        }

        /* Some chips seem to have default value 0xff for all limit
         * registers. For low voltage limits it makes no sense and triggers
         * alarms, so change to 0 instead. For high temperature limits, it
         * means -1 degree C, which surprisingly doesn't trigger an alarm,
         * but is still confusing, so change to 127 degrees C. */
        for (i = 0; i < 8; i++) {
                tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
                if (tmp == 0xff)
                        it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
        }
        for (i = 0; i < 3; i++) {
                tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
                if (tmp == 0xff)
                        it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
        }

        /* Check if temperature channels are reset manually or by some reason */
        tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE);
        if ((tmp & 0x3f) == 0) {
                /* Temp1,Temp3=thermistor; Temp2=thermal diode */
                tmp = (tmp & 0xc0) | 0x2a;
                it87_write_value(data, IT87_REG_TEMP_ENABLE, tmp);
        }
        data->sensor = tmp;

        /* Check if voltage monitors are reset manually or by some reason */
        tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
        if ((tmp & 0xff) == 0) {
                /* Enable all voltage monitors */
                it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
        }

        /* Check if tachometers are reset manually or by some reason */
        mask = 0x70 & ~(sio_data->skip_fan << 4);
        data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
        if ((data->fan_main_ctrl & mask) == 0) {
                /* Enable all fan tachometers */
                data->fan_main_ctrl |= mask;
                it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
                                 data->fan_main_ctrl);
        }
        data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;

        /* Set tachometers to 16-bit mode if needed */
        if (has_16bit_fans(data)) {
                tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
                if (~tmp & 0x07 & data->has_fan) {
                        dev_dbg(&pdev->dev,
                                "Setting fan1-3 to 16-bit mode\n");
                        it87_write_value(data, IT87_REG_FAN_16BIT,
                                         tmp | 0x07);
                }
                /* IT8705F only supports three fans. */
                if (data->type != it87) {
                        if (tmp & (1 << 4))
                                data->has_fan |= (1 << 3); /* fan4 enabled */
                        if (tmp & (1 << 5))
                                data->has_fan |= (1 << 4); /* fan5 enabled */
                }
        }

        /* Fan input pins may be used for alternative functions */
        data->has_fan &= ~sio_data->skip_fan;

        /* Start monitoring */
        it87_write_value(data, IT87_REG_CONFIG,
                         (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
                         | (update_vbat ? 0x41 : 0x01));
}

static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
{
        data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
        if (data->pwm_ctrl[nr] & 0x80)  /* Automatic mode */
                data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
        else                            /* Manual mode */
                data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;

        if (has_old_autopwm(data)) {
                int i;

                for (i = 0; i < 5 ; i++)
                        data->auto_temp[nr][i] = it87_read_value(data,
                                                IT87_REG_AUTO_TEMP(nr, i));
                for (i = 0; i < 3 ; i++)
                        data->auto_pwm[nr][i] = it87_read_value(data,
                                                IT87_REG_AUTO_PWM(nr, i));
        }
}

static struct it87_data *it87_update_device(struct device *dev)
{
        struct it87_data *data = dev_get_drvdata(dev);
        int i;

        mutex_lock(&data->update_lock);

        if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
            || !data->valid) {
                if (update_vbat) {
                        /* Cleared after each update, so reenable.  Value
                           returned by this read will be previous value */
                        it87_write_value(data, IT87_REG_CONFIG,
                                it87_read_value(data, IT87_REG_CONFIG) | 0x40);
                }
                for (i = 0; i <= 7; i++) {
                        data->in[i] =
                                it87_read_value(data, IT87_REG_VIN(i));
                        data->in_min[i] =
                                it87_read_value(data, IT87_REG_VIN_MIN(i));
                        data->in_max[i] =
                                it87_read_value(data, IT87_REG_VIN_MAX(i));
                }
                /* in8 (battery) has no limit registers */
                data->in[8] = it87_read_value(data, IT87_REG_VIN(8));

                for (i = 0; i < 5; i++) {
                        /* Skip disabled fans */
                        if (!(data->has_fan & (1 << i)))
                                continue;

                        data->fan_min[i] =
                                it87_read_value(data, IT87_REG_FAN_MIN[i]);
                        data->fan[i] = it87_read_value(data,
                                       IT87_REG_FAN[i]);
                        /* Add high byte if in 16-bit mode */
                        if (has_16bit_fans(data)) {
                                data->fan[i] |= it87_read_value(data,
                                                IT87_REG_FANX[i]) << 8;
                                data->fan_min[i] |= it87_read_value(data,
                                                IT87_REG_FANX_MIN[i]) << 8;
                        }
                }
                for (i = 0; i < 3; i++) {
                        data->temp[i] =
                                it87_read_value(data, IT87_REG_TEMP(i));
                        data->temp_high[i] =
                                it87_read_value(data, IT87_REG_TEMP_HIGH(i));
                        data->temp_low[i] =
                                it87_read_value(data, IT87_REG_TEMP_LOW(i));
                }

                /* Newer chips don't have clock dividers */
                if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
                        i = it87_read_value(data, IT87_REG_FAN_DIV);
                        data->fan_div[0] = i & 0x07;
                        data->fan_div[1] = (i >> 3) & 0x07;
                        data->fan_div[2] = (i & 0x40) ? 3 : 1;
                }

                data->alarms =
                        it87_read_value(data, IT87_REG_ALARM1) |
                        (it87_read_value(data, IT87_REG_ALARM2) << 8) |
                        (it87_read_value(data, IT87_REG_ALARM3) << 16);
                data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);

                data->fan_main_ctrl = it87_read_value(data,
                                IT87_REG_FAN_MAIN_CTRL);
                data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
                for (i = 0; i < 3; i++)
                        it87_update_pwm_ctrl(data, i);

                data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
                /* The 8705 does not have VID capability.
                   The 8718 and the 8720 don't use IT87_REG_VID for the
                   same purpose. */
                if (data->type == it8712 || data->type == it8716) {
                        data->vid = it87_read_value(data, IT87_REG_VID);
                        /* The older IT8712F revisions had only 5 VID pins,
                           but we assume it is always safe to read 6 bits. */
                        data->vid &= 0x3f;
                }
                data->last_updated = jiffies;
                data->valid = 1;
        }

        mutex_unlock(&data->update_lock);

        return data;
}

static int __init it87_device_add(unsigned short address,
                                  const struct it87_sio_data *sio_data)
{
        struct resource res = {
                .start  = address + IT87_EC_OFFSET,
                .end    = address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
                .name   = DRVNAME,
                .flags  = IORESOURCE_IO,
        };
        int err;

        err = acpi_check_resource_conflict(&res);
        if (err)
                goto exit;

        pdev = platform_device_alloc(DRVNAME, address);
        if (!pdev) {
                err = -ENOMEM;
                printk(KERN_ERR DRVNAME ": Device allocation failed\n");
                goto exit;
        }

        err = platform_device_add_resources(pdev, &res, 1);
        if (err) {
                printk(KERN_ERR DRVNAME ": Device resource addition failed "
                       "(%d)\n", err);
                goto exit_device_put;
        }

        err = platform_device_add_data(pdev, sio_data,
                                       sizeof(struct it87_sio_data));
        if (err) {
                printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
                goto exit_device_put;
        }

        err = platform_device_add(pdev);
        if (err) {
                printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
                       err);
                goto exit_device_put;
        }

        return 0;

exit_device_put:
        platform_device_put(pdev);
exit:
        return err;
}

static int __init sm_it87_init(void)
{
        int err;
        unsigned short isa_address = 0;
        struct it87_sio_data sio_data;

        memset(&sio_data, 0, sizeof(struct it87_sio_data));
        err = it87_find(&isa_address, &sio_data);
        if (err)
                return err;
        err = platform_driver_register(&it87_driver);
        if (err)
                return err;

        err = it87_device_add(isa_address, &sio_data);
        if (err) {
                platform_driver_unregister(&it87_driver);
                return err;
        }

        return 0;
}

static void __exit sm_it87_exit(void)
{
        platform_device_unregister(pdev);
        platform_driver_unregister(&it87_driver);
}


MODULE_AUTHOR("Chris Gauthron, "
              "Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
module_param(fix_pwm_polarity, bool, 0);
MODULE_PARM_DESC(fix_pwm_polarity,
                 "Force PWM polarity to active high (DANGEROUS)");
MODULE_LICENSE("GPL");

module_init(sm_it87_init);
module_exit(sm_it87_exit);