drm/radeon/kms: disable HDMI audio for now on rv710/rv730
[safe/jmp/linux-2.6] / drivers / gpu / drm / radeon / r600_audio.c
1 /*
2  * Copyright 2008 Advanced Micro Devices, Inc.
3  * Copyright 2008 Red Hat Inc.
4  * Copyright 2009 Christian König.
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a
7  * copy of this software and associated documentation files (the "Software"),
8  * to deal in the Software without restriction, including without limitation
9  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10  * and/or sell copies of the Software, and to permit persons to whom the
11  * Software is furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
19  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
20  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
21  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
22  * OTHER DEALINGS IN THE SOFTWARE.
23  *
24  * Authors: Christian König
25  */
26 #include "drmP.h"
27 #include "radeon.h"
28 #include "radeon_reg.h"
29 #include "atom.h"
30
31 #define AUDIO_TIMER_INTERVALL 100 /* 1/10 sekund should be enough */
32
33 /*
34  * check if the chipset is supported
35  */
36 static int r600_audio_chipset_supported(struct radeon_device *rdev)
37 {
38         return (rdev->family >= CHIP_R600 && rdev->family < CHIP_RV710)
39                 || rdev->family == CHIP_RS600
40                 || rdev->family == CHIP_RS690
41                 || rdev->family == CHIP_RS740;
42 }
43
44 /*
45  * current number of channels
46  */
47 static int r600_audio_channels(struct radeon_device *rdev)
48 {
49         return (RREG32(R600_AUDIO_RATE_BPS_CHANNEL) & 0x7) + 1;
50 }
51
52 /*
53  * current bits per sample
54  */
55 static int r600_audio_bits_per_sample(struct radeon_device *rdev)
56 {
57         uint32_t value = (RREG32(R600_AUDIO_RATE_BPS_CHANNEL) & 0xF0) >> 4;
58         switch (value) {
59         case 0x0: return  8;
60         case 0x1: return 16;
61         case 0x2: return 20;
62         case 0x3: return 24;
63         case 0x4: return 32;
64         }
65
66         DRM_ERROR("Unknown bits per sample 0x%x using 16 instead.\n", (int)value);
67
68         return 16;
69 }
70
71 /*
72  * current sampling rate in HZ
73  */
74 static int r600_audio_rate(struct radeon_device *rdev)
75 {
76         uint32_t value = RREG32(R600_AUDIO_RATE_BPS_CHANNEL);
77         uint32_t result;
78
79         if (value & 0x4000)
80                 result = 44100;
81         else
82                 result = 48000;
83
84         result *= ((value >> 11) & 0x7) + 1;
85         result /= ((value >> 8) & 0x7) + 1;
86
87         return result;
88 }
89
90 /*
91  * iec 60958 status bits
92  */
93 static uint8_t r600_audio_status_bits(struct radeon_device *rdev)
94 {
95         return RREG32(R600_AUDIO_STATUS_BITS) & 0xff;
96 }
97
98 /*
99  * iec 60958 category code
100  */
101 static uint8_t r600_audio_category_code(struct radeon_device *rdev)
102 {
103         return (RREG32(R600_AUDIO_STATUS_BITS) >> 8) & 0xff;
104 }
105
106 /*
107  * update all hdmi interfaces with current audio parameters
108  */
109 static void r600_audio_update_hdmi(unsigned long param)
110 {
111         struct radeon_device *rdev = (struct radeon_device *)param;
112         struct drm_device *dev = rdev->ddev;
113
114         int channels = r600_audio_channels(rdev);
115         int rate = r600_audio_rate(rdev);
116         int bps = r600_audio_bits_per_sample(rdev);
117         uint8_t status_bits = r600_audio_status_bits(rdev);
118         uint8_t category_code = r600_audio_category_code(rdev);
119
120         struct drm_encoder *encoder;
121         int changes = 0;
122
123         changes |= channels != rdev->audio_channels;
124         changes |= rate != rdev->audio_rate;
125         changes |= bps != rdev->audio_bits_per_sample;
126         changes |= status_bits != rdev->audio_status_bits;
127         changes |= category_code != rdev->audio_category_code;
128
129         if (changes) {
130                 rdev->audio_channels = channels;
131                 rdev->audio_rate = rate;
132                 rdev->audio_bits_per_sample = bps;
133                 rdev->audio_status_bits = status_bits;
134                 rdev->audio_category_code = category_code;
135         }
136
137         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
138                 if (changes || r600_hdmi_buffer_status_changed(encoder))
139                         r600_hdmi_update_audio_settings(
140                                 encoder, channels,
141                                 rate, bps, status_bits,
142                                 category_code);
143         }
144
145         mod_timer(&rdev->audio_timer,
146                 jiffies + msecs_to_jiffies(AUDIO_TIMER_INTERVALL));
147 }
148
149 /*
150  * initialize the audio vars and register the update timer
151  */
152 int r600_audio_init(struct radeon_device *rdev)
153 {
154         if (!r600_audio_chipset_supported(rdev))
155                 return 0;
156
157         DRM_INFO("%s audio support", radeon_audio ? "Enabling" : "Disabling");
158         WREG32_P(R600_AUDIO_ENABLE, radeon_audio ? 0x81000000 : 0x0, ~0x81000000);
159
160         rdev->audio_channels = -1;
161         rdev->audio_rate = -1;
162         rdev->audio_bits_per_sample = -1;
163         rdev->audio_status_bits = 0;
164         rdev->audio_category_code = 0;
165
166         setup_timer(
167                 &rdev->audio_timer,
168                 r600_audio_update_hdmi,
169                 (unsigned long)rdev);
170
171         mod_timer(&rdev->audio_timer, jiffies + 1);
172
173         return 0;
174 }
175
176 /*
177  * determin how the encoders and audio interface is wired together
178  */
179 int r600_audio_tmds_index(struct drm_encoder *encoder)
180 {
181         struct drm_device *dev = encoder->dev;
182         struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
183         struct drm_encoder *other;
184
185         switch (radeon_encoder->encoder_id) {
186         case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
187         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
188         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
189                 return 0;
190
191         case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
192                 /* special case check if an TMDS1 is present */
193                 list_for_each_entry(other, &dev->mode_config.encoder_list, head) {
194                         if (to_radeon_encoder(other)->encoder_id ==
195                                 ENCODER_OBJECT_ID_INTERNAL_TMDS1)
196                                 return 1;
197                 }
198                 return 0;
199
200         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
201         case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
202                 return 1;
203
204         default:
205                 DRM_ERROR("Unsupported encoder type 0x%02X\n",
206                           radeon_encoder->encoder_id);
207                 return -1;
208         }
209 }
210
211 /*
212  * atach the audio codec to the clock source of the encoder
213  */
214 void r600_audio_set_clock(struct drm_encoder *encoder, int clock)
215 {
216         struct drm_device *dev = encoder->dev;
217         struct radeon_device *rdev = dev->dev_private;
218         struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
219         int base_rate = 48000;
220
221         switch (radeon_encoder->encoder_id) {
222         case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
223         case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
224                 WREG32_P(R600_AUDIO_TIMING, 0, ~0x301);
225                 break;
226
227         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
228         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
229         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
230         case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
231                 WREG32_P(R600_AUDIO_TIMING, 0x100, ~0x301);
232                 break;
233
234         default:
235                 DRM_ERROR("Unsupported encoder type 0x%02X\n",
236                           radeon_encoder->encoder_id);
237                 return;
238         }
239
240         switch (r600_audio_tmds_index(encoder)) {
241         case 0:
242                 WREG32(R600_AUDIO_PLL1_MUL, base_rate*50);
243                 WREG32(R600_AUDIO_PLL1_DIV, clock*100);
244                 WREG32(R600_AUDIO_CLK_SRCSEL, 0);
245                 break;
246
247         case 1:
248                 WREG32(R600_AUDIO_PLL2_MUL, base_rate*50);
249                 WREG32(R600_AUDIO_PLL2_DIV, clock*100);
250                 WREG32(R600_AUDIO_CLK_SRCSEL, 1);
251                 break;
252         }
253 }
254
255 /*
256  * release the audio timer
257  * TODO: How to do this correctly on SMP systems?
258  */
259 void r600_audio_fini(struct radeon_device *rdev)
260 {
261         if (!r600_audio_chipset_supported(rdev))
262                 return;
263
264         WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000);
265
266         del_timer(&rdev->audio_timer);
267 }