Merge branch 'linus' into cont_syslog
[safe/jmp/linux-2.6] / drivers / gpu / drm / nouveau / nouveau_connector.c
1 /*
2  * Copyright (C) 2008 Maarten Maathuis.
3  * All Rights Reserved.
4  *
5  * Permission is hereby granted, free of charge, to any person obtaining
6  * a copy of this software and associated documentation files (the
7  * "Software"), to deal in the Software without restriction, including
8  * without limitation the rights to use, copy, modify, merge, publish,
9  * distribute, sublicense, and/or sell copies of the Software, and to
10  * permit persons to whom the Software is furnished to do so, subject to
11  * the following conditions:
12  *
13  * The above copyright notice and this permission notice (including the
14  * next paragraph) shall be included in all copies or substantial
15  * portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
20  * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
21  * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
22  * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
23  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
24  *
25  */
26
27 #include <acpi/button.h>
28
29 #include "drmP.h"
30 #include "drm_edid.h"
31 #include "drm_crtc_helper.h"
32
33 #include "nouveau_reg.h"
34 #include "nouveau_drv.h"
35 #include "nouveau_encoder.h"
36 #include "nouveau_crtc.h"
37 #include "nouveau_connector.h"
38 #include "nouveau_hw.h"
39
40 static inline struct drm_encoder_slave_funcs *
41 get_slave_funcs(struct nouveau_encoder *enc)
42 {
43         return to_encoder_slave(to_drm_encoder(enc))->slave_funcs;
44 }
45
46 static struct nouveau_encoder *
47 find_encoder_by_type(struct drm_connector *connector, int type)
48 {
49         struct drm_device *dev = connector->dev;
50         struct nouveau_encoder *nv_encoder;
51         struct drm_mode_object *obj;
52         int i, id;
53
54         for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
55                 id = connector->encoder_ids[i];
56                 if (!id)
57                         break;
58
59                 obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
60                 if (!obj)
61                         continue;
62                 nv_encoder = nouveau_encoder(obj_to_encoder(obj));
63
64                 if (type == OUTPUT_ANY || nv_encoder->dcb->type == type)
65                         return nv_encoder;
66         }
67
68         return NULL;
69 }
70
71 struct nouveau_connector *
72 nouveau_encoder_connector_get(struct nouveau_encoder *encoder)
73 {
74         struct drm_device *dev = to_drm_encoder(encoder)->dev;
75         struct drm_connector *drm_connector;
76
77         list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) {
78                 if (drm_connector->encoder == to_drm_encoder(encoder))
79                         return nouveau_connector(drm_connector);
80         }
81
82         return NULL;
83 }
84
85
86 static void
87 nouveau_connector_destroy(struct drm_connector *drm_connector)
88 {
89         struct nouveau_connector *nv_connector =
90                 nouveau_connector(drm_connector);
91         struct drm_device *dev;
92
93         if (!nv_connector)
94                 return;
95
96         dev = nv_connector->base.dev;
97         NV_DEBUG_KMS(dev, "\n");
98
99         kfree(nv_connector->edid);
100         drm_sysfs_connector_remove(drm_connector);
101         drm_connector_cleanup(drm_connector);
102         kfree(drm_connector);
103 }
104
105 static void
106 nouveau_connector_ddc_prepare(struct drm_connector *connector, int *flags)
107 {
108         struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
109
110         if (dev_priv->card_type >= NV_50)
111                 return;
112
113         *flags = 0;
114         if (NVLockVgaCrtcs(dev_priv->dev, false))
115                 *flags |= 1;
116         if (nv_heads_tied(dev_priv->dev))
117                 *flags |= 2;
118
119         if (*flags & 2)
120                 NVSetOwner(dev_priv->dev, 0); /* necessary? */
121 }
122
123 static void
124 nouveau_connector_ddc_finish(struct drm_connector *connector, int flags)
125 {
126         struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
127
128         if (dev_priv->card_type >= NV_50)
129                 return;
130
131         if (flags & 2)
132                 NVSetOwner(dev_priv->dev, 4);
133         if (flags & 1)
134                 NVLockVgaCrtcs(dev_priv->dev, true);
135 }
136
137 static struct nouveau_i2c_chan *
138 nouveau_connector_ddc_detect(struct drm_connector *connector,
139                              struct nouveau_encoder **pnv_encoder)
140 {
141         struct drm_device *dev = connector->dev;
142         uint8_t out_buf[] = { 0x0, 0x0}, buf[2];
143         int ret, flags, i;
144
145         struct i2c_msg msgs[] = {
146                 {
147                         .addr = 0x50,
148                         .flags = 0,
149                         .len = 1,
150                         .buf = out_buf,
151                 },
152                 {
153                         .addr = 0x50,
154                         .flags = I2C_M_RD,
155                         .len = 1,
156                         .buf = buf,
157                 }
158         };
159
160         for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
161                 struct nouveau_i2c_chan *i2c = NULL;
162                 struct nouveau_encoder *nv_encoder;
163                 struct drm_mode_object *obj;
164                 int id;
165
166                 id = connector->encoder_ids[i];
167                 if (!id)
168                         break;
169
170                 obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
171                 if (!obj)
172                         continue;
173                 nv_encoder = nouveau_encoder(obj_to_encoder(obj));
174
175                 if (nv_encoder->dcb->i2c_index < 0xf)
176                         i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
177                 if (!i2c)
178                         continue;
179
180                 nouveau_connector_ddc_prepare(connector, &flags);
181                 ret = i2c_transfer(&i2c->adapter, msgs, 2);
182                 nouveau_connector_ddc_finish(connector, flags);
183
184                 if (ret == 2) {
185                         *pnv_encoder = nv_encoder;
186                         return i2c;
187                 }
188         }
189
190         return NULL;
191 }
192
193 static void
194 nouveau_connector_set_encoder(struct drm_connector *connector,
195                               struct nouveau_encoder *nv_encoder)
196 {
197         struct nouveau_connector *nv_connector = nouveau_connector(connector);
198         struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
199         struct drm_device *dev = connector->dev;
200
201         if (nv_connector->detected_encoder == nv_encoder)
202                 return;
203         nv_connector->detected_encoder = nv_encoder;
204
205         if (nv_encoder->dcb->type == OUTPUT_LVDS ||
206             nv_encoder->dcb->type == OUTPUT_TMDS) {
207                 connector->doublescan_allowed = false;
208                 connector->interlace_allowed = false;
209         } else {
210                 connector->doublescan_allowed = true;
211                 if (dev_priv->card_type == NV_20 ||
212                    (dev_priv->card_type == NV_10 &&
213                     (dev->pci_device & 0x0ff0) != 0x0100 &&
214                     (dev->pci_device & 0x0ff0) != 0x0150))
215                         /* HW is broken */
216                         connector->interlace_allowed = false;
217                 else
218                         connector->interlace_allowed = true;
219         }
220
221         if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
222                 drm_connector_property_set_value(connector,
223                         dev->mode_config.dvi_i_subconnector_property,
224                         nv_encoder->dcb->type == OUTPUT_TMDS ?
225                         DRM_MODE_SUBCONNECTOR_DVID :
226                         DRM_MODE_SUBCONNECTOR_DVIA);
227         }
228 }
229
230 static enum drm_connector_status
231 nouveau_connector_detect(struct drm_connector *connector)
232 {
233         struct drm_device *dev = connector->dev;
234         struct nouveau_connector *nv_connector = nouveau_connector(connector);
235         struct nouveau_encoder *nv_encoder = NULL;
236         struct nouveau_i2c_chan *i2c;
237         int type, flags;
238
239         if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS)
240                 nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
241         if (nv_encoder && nv_connector->native_mode) {
242                 unsigned status = connector_status_connected;
243
244 #if defined(CONFIG_ACPI_BUTTON) || \
245         (defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
246                 if (!nouveau_ignorelid && !acpi_lid_open())
247                         status = connector_status_unknown;
248 #endif
249                 nouveau_connector_set_encoder(connector, nv_encoder);
250                 return status;
251         }
252
253         /* Cleanup the previous EDID block. */
254         if (nv_connector->edid) {
255                 drm_mode_connector_update_edid_property(connector, NULL);
256                 kfree(nv_connector->edid);
257                 nv_connector->edid = NULL;
258         }
259
260         i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
261         if (i2c) {
262                 nouveau_connector_ddc_prepare(connector, &flags);
263                 nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
264                 nouveau_connector_ddc_finish(connector, flags);
265                 drm_mode_connector_update_edid_property(connector,
266                                                         nv_connector->edid);
267                 if (!nv_connector->edid) {
268                         NV_ERROR(dev, "DDC responded, but no EDID for %s\n",
269                                  drm_get_connector_name(connector));
270                         goto detect_analog;
271                 }
272
273                 if (nv_encoder->dcb->type == OUTPUT_DP &&
274                     !nouveau_dp_detect(to_drm_encoder(nv_encoder))) {
275                         NV_ERROR(dev, "Detected %s, but failed init\n",
276                                  drm_get_connector_name(connector));
277                         return connector_status_disconnected;
278                 }
279
280                 /* Override encoder type for DVI-I based on whether EDID
281                  * says the display is digital or analog, both use the
282                  * same i2c channel so the value returned from ddc_detect
283                  * isn't necessarily correct.
284                  */
285                 if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
286                         if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL)
287                                 type = OUTPUT_TMDS;
288                         else
289                                 type = OUTPUT_ANALOG;
290
291                         nv_encoder = find_encoder_by_type(connector, type);
292                         if (!nv_encoder) {
293                                 NV_ERROR(dev, "Detected %d encoder on %s, "
294                                               "but no object!\n", type,
295                                          drm_get_connector_name(connector));
296                                 return connector_status_disconnected;
297                         }
298                 }
299
300                 nouveau_connector_set_encoder(connector, nv_encoder);
301                 return connector_status_connected;
302         }
303
304 detect_analog:
305         nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
306         if (!nv_encoder && !nouveau_tv_disable)
307                 nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
308         if (nv_encoder) {
309                 struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
310                 struct drm_encoder_helper_funcs *helper =
311                                                 encoder->helper_private;
312
313                 if (helper->detect(encoder, connector) ==
314                                                 connector_status_connected) {
315                         nouveau_connector_set_encoder(connector, nv_encoder);
316                         return connector_status_connected;
317                 }
318
319         }
320
321         return connector_status_disconnected;
322 }
323
324 static void
325 nouveau_connector_force(struct drm_connector *connector)
326 {
327         struct nouveau_connector *nv_connector = nouveau_connector(connector);
328         struct nouveau_encoder *nv_encoder;
329         int type;
330
331         if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
332                 if (connector->force == DRM_FORCE_ON_DIGITAL)
333                         type = OUTPUT_TMDS;
334                 else
335                         type = OUTPUT_ANALOG;
336         } else
337                 type = OUTPUT_ANY;
338
339         nv_encoder = find_encoder_by_type(connector, type);
340         if (!nv_encoder) {
341                 NV_ERROR(connector->dev, "can't find encoder to force %s on!\n",
342                          drm_get_connector_name(connector));
343                 connector->status = connector_status_disconnected;
344                 return;
345         }
346
347         nouveau_connector_set_encoder(connector, nv_encoder);
348 }
349
350 static int
351 nouveau_connector_set_property(struct drm_connector *connector,
352                                struct drm_property *property, uint64_t value)
353 {
354         struct nouveau_connector *nv_connector = nouveau_connector(connector);
355         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
356         struct drm_device *dev = connector->dev;
357         int ret;
358
359         /* Scaling mode */
360         if (property == dev->mode_config.scaling_mode_property) {
361                 struct nouveau_crtc *nv_crtc = NULL;
362                 bool modeset = false;
363
364                 switch (value) {
365                 case DRM_MODE_SCALE_NONE:
366                 case DRM_MODE_SCALE_FULLSCREEN:
367                 case DRM_MODE_SCALE_CENTER:
368                 case DRM_MODE_SCALE_ASPECT:
369                         break;
370                 default:
371                         return -EINVAL;
372                 }
373
374                 /* LVDS always needs gpu scaling */
375                 if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS &&
376                     value == DRM_MODE_SCALE_NONE)
377                         return -EINVAL;
378
379                 /* Changing between GPU and panel scaling requires a full
380                  * modeset
381                  */
382                 if ((nv_connector->scaling_mode == DRM_MODE_SCALE_NONE) ||
383                     (value == DRM_MODE_SCALE_NONE))
384                         modeset = true;
385                 nv_connector->scaling_mode = value;
386
387                 if (connector->encoder && connector->encoder->crtc)
388                         nv_crtc = nouveau_crtc(connector->encoder->crtc);
389                 if (!nv_crtc)
390                         return 0;
391
392                 if (modeset || !nv_crtc->set_scale) {
393                         ret = drm_crtc_helper_set_mode(&nv_crtc->base,
394                                                         &nv_crtc->base.mode,
395                                                         nv_crtc->base.x,
396                                                         nv_crtc->base.y, NULL);
397                         if (!ret)
398                                 return -EINVAL;
399                 } else {
400                         ret = nv_crtc->set_scale(nv_crtc, value, true);
401                         if (ret)
402                                 return ret;
403                 }
404
405                 return 0;
406         }
407
408         /* Dithering */
409         if (property == dev->mode_config.dithering_mode_property) {
410                 struct nouveau_crtc *nv_crtc = NULL;
411
412                 if (value == DRM_MODE_DITHERING_ON)
413                         nv_connector->use_dithering = true;
414                 else
415                         nv_connector->use_dithering = false;
416
417                 if (connector->encoder && connector->encoder->crtc)
418                         nv_crtc = nouveau_crtc(connector->encoder->crtc);
419
420                 if (!nv_crtc || !nv_crtc->set_dither)
421                         return 0;
422
423                 return nv_crtc->set_dither(nv_crtc, nv_connector->use_dithering,
424                                            true);
425         }
426
427         if (nv_encoder && nv_encoder->dcb->type == OUTPUT_TV)
428                 return get_slave_funcs(nv_encoder)->
429                         set_property(to_drm_encoder(nv_encoder), connector, property, value);
430
431         return -EINVAL;
432 }
433
434 static struct drm_display_mode *
435 nouveau_connector_native_mode(struct drm_connector *connector)
436 {
437         struct drm_connector_helper_funcs *helper = connector->helper_private;
438         struct nouveau_connector *nv_connector = nouveau_connector(connector);
439         struct drm_device *dev = connector->dev;
440         struct drm_display_mode *mode, *largest = NULL;
441         int high_w = 0, high_h = 0, high_v = 0;
442
443         list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
444                 if (helper->mode_valid(connector, mode) != MODE_OK)
445                         continue;
446
447                 /* Use preferred mode if there is one.. */
448                 if (mode->type & DRM_MODE_TYPE_PREFERRED) {
449                         NV_DEBUG_KMS(dev, "native mode from preferred\n");
450                         return drm_mode_duplicate(dev, mode);
451                 }
452
453                 /* Otherwise, take the resolution with the largest width, then
454                  * height, then vertical refresh
455                  */
456                 if (mode->hdisplay < high_w)
457                         continue;
458
459                 if (mode->hdisplay == high_w && mode->vdisplay < high_h)
460                         continue;
461
462                 if (mode->hdisplay == high_w && mode->vdisplay == high_h &&
463                     mode->vrefresh < high_v)
464                         continue;
465
466                 high_w = mode->hdisplay;
467                 high_h = mode->vdisplay;
468                 high_v = mode->vrefresh;
469                 largest = mode;
470         }
471
472         NV_DEBUG_KMS(dev, "native mode from largest: %dx%d@%d\n",
473                       high_w, high_h, high_v);
474         return largest ? drm_mode_duplicate(dev, largest) : NULL;
475 }
476
477 struct moderec {
478         int hdisplay;
479         int vdisplay;
480 };
481
482 static struct moderec scaler_modes[] = {
483         { 1920, 1200 },
484         { 1920, 1080 },
485         { 1680, 1050 },
486         { 1600, 1200 },
487         { 1400, 1050 },
488         { 1280, 1024 },
489         { 1280, 960 },
490         { 1152, 864 },
491         { 1024, 768 },
492         { 800, 600 },
493         { 720, 400 },
494         { 640, 480 },
495         { 640, 400 },
496         { 640, 350 },
497         {}
498 };
499
500 static int
501 nouveau_connector_scaler_modes_add(struct drm_connector *connector)
502 {
503         struct nouveau_connector *nv_connector = nouveau_connector(connector);
504         struct drm_display_mode *native = nv_connector->native_mode, *m;
505         struct drm_device *dev = connector->dev;
506         struct moderec *mode = &scaler_modes[0];
507         int modes = 0;
508
509         if (!native)
510                 return 0;
511
512         while (mode->hdisplay) {
513                 if (mode->hdisplay <= native->hdisplay &&
514                     mode->vdisplay <= native->vdisplay) {
515                         m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay,
516                                          drm_mode_vrefresh(native), false,
517                                          false, false);
518                         if (!m)
519                                 continue;
520
521                         m->type |= DRM_MODE_TYPE_DRIVER;
522
523                         drm_mode_probed_add(connector, m);
524                         modes++;
525                 }
526
527                 mode++;
528         }
529
530         return modes;
531 }
532
533 static int
534 nouveau_connector_get_modes(struct drm_connector *connector)
535 {
536         struct drm_device *dev = connector->dev;
537         struct nouveau_connector *nv_connector = nouveau_connector(connector);
538         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
539         int ret = 0;
540
541         /* If we're not LVDS, destroy the previous native mode, the attached
542          * monitor could have changed.
543          */
544         if (nv_connector->dcb->type != DCB_CONNECTOR_LVDS &&
545             nv_connector->native_mode) {
546                 drm_mode_destroy(dev, nv_connector->native_mode);
547                 nv_connector->native_mode = NULL;
548         }
549
550         if (nv_connector->edid)
551                 ret = drm_add_edid_modes(connector, nv_connector->edid);
552
553         /* Find the native mode if this is a digital panel, if we didn't
554          * find any modes through DDC previously add the native mode to
555          * the list of modes.
556          */
557         if (!nv_connector->native_mode)
558                 nv_connector->native_mode =
559                         nouveau_connector_native_mode(connector);
560         if (ret == 0 && nv_connector->native_mode) {
561                 struct drm_display_mode *mode;
562
563                 mode = drm_mode_duplicate(dev, nv_connector->native_mode);
564                 drm_mode_probed_add(connector, mode);
565                 ret = 1;
566         }
567
568         if (nv_encoder->dcb->type == OUTPUT_TV)
569                 ret = get_slave_funcs(nv_encoder)->
570                         get_modes(to_drm_encoder(nv_encoder), connector);
571
572         if (nv_encoder->dcb->type == OUTPUT_LVDS)
573                 ret += nouveau_connector_scaler_modes_add(connector);
574
575         return ret;
576 }
577
578 static int
579 nouveau_connector_mode_valid(struct drm_connector *connector,
580                              struct drm_display_mode *mode)
581 {
582         struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
583         struct nouveau_connector *nv_connector = nouveau_connector(connector);
584         struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
585         unsigned min_clock = 25000, max_clock = min_clock;
586         unsigned clock = mode->clock;
587
588         switch (nv_encoder->dcb->type) {
589         case OUTPUT_LVDS:
590                 if (nv_connector->native_mode &&
591                     (mode->hdisplay > nv_connector->native_mode->hdisplay ||
592                      mode->vdisplay > nv_connector->native_mode->vdisplay))
593                         return MODE_PANEL;
594
595                 min_clock = 0;
596                 max_clock = 400000;
597                 break;
598         case OUTPUT_TMDS:
599                 if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
600                     !nv_encoder->dcb->duallink_possible)
601                         max_clock = 165000;
602                 else
603                         max_clock = 330000;
604                 break;
605         case OUTPUT_ANALOG:
606                 max_clock = nv_encoder->dcb->crtconf.maxfreq;
607                 if (!max_clock)
608                         max_clock = 350000;
609                 break;
610         case OUTPUT_TV:
611                 return get_slave_funcs(nv_encoder)->
612                         mode_valid(to_drm_encoder(nv_encoder), mode);
613         case OUTPUT_DP:
614                 if (nv_encoder->dp.link_bw == DP_LINK_BW_2_7)
615                         max_clock = nv_encoder->dp.link_nr * 270000;
616                 else
617                         max_clock = nv_encoder->dp.link_nr * 162000;
618
619                 clock *= 3;
620                 break;
621         default:
622                 BUG_ON(1);
623                 return MODE_BAD;
624         }
625
626         if (clock < min_clock)
627                 return MODE_CLOCK_LOW;
628
629         if (clock > max_clock)
630                 return MODE_CLOCK_HIGH;
631
632         return MODE_OK;
633 }
634
635 static struct drm_encoder *
636 nouveau_connector_best_encoder(struct drm_connector *connector)
637 {
638         struct nouveau_connector *nv_connector = nouveau_connector(connector);
639
640         if (nv_connector->detected_encoder)
641                 return to_drm_encoder(nv_connector->detected_encoder);
642
643         return NULL;
644 }
645
646 static const struct drm_connector_helper_funcs
647 nouveau_connector_helper_funcs = {
648         .get_modes = nouveau_connector_get_modes,
649         .mode_valid = nouveau_connector_mode_valid,
650         .best_encoder = nouveau_connector_best_encoder,
651 };
652
653 static const struct drm_connector_funcs
654 nouveau_connector_funcs = {
655         .dpms = drm_helper_connector_dpms,
656         .save = NULL,
657         .restore = NULL,
658         .detect = nouveau_connector_detect,
659         .destroy = nouveau_connector_destroy,
660         .fill_modes = drm_helper_probe_single_connector_modes,
661         .set_property = nouveau_connector_set_property,
662         .force = nouveau_connector_force
663 };
664
665 static int
666 nouveau_connector_create_lvds(struct drm_device *dev,
667                               struct drm_connector *connector)
668 {
669         struct nouveau_connector *nv_connector = nouveau_connector(connector);
670         struct drm_nouveau_private *dev_priv = dev->dev_private;
671         struct nouveau_i2c_chan *i2c = NULL;
672         struct nouveau_encoder *nv_encoder;
673         struct drm_display_mode native, *mode, *temp;
674         bool dummy, if_is_24bit = false;
675         int ret, flags;
676
677         nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
678         if (!nv_encoder)
679                 return -ENODEV;
680
681         ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &if_is_24bit);
682         if (ret) {
683                 NV_ERROR(dev, "Error parsing LVDS table, disabling LVDS\n");
684                 return ret;
685         }
686         nv_connector->use_dithering = !if_is_24bit;
687
688         /* Firstly try getting EDID over DDC, if allowed and I2C channel
689          * is available.
690          */
691         if (!dev_priv->vbios.fp_no_ddc && nv_encoder->dcb->i2c_index < 0xf)
692                 i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
693
694         if (i2c) {
695                 nouveau_connector_ddc_prepare(connector, &flags);
696                 nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
697                 nouveau_connector_ddc_finish(connector, flags);
698         }
699
700         /* If no EDID found above, and the VBIOS indicates a hardcoded
701          * modeline is avalilable for the panel, set it as the panel's
702          * native mode and exit.
703          */
704         if (!nv_connector->edid && nouveau_bios_fp_mode(dev, &native) &&
705              (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
706               dev_priv->vbios.fp_no_ddc)) {
707                 nv_connector->native_mode = drm_mode_duplicate(dev, &native);
708                 goto out;
709         }
710
711         /* Still nothing, some VBIOS images have a hardcoded EDID block
712          * stored for the panel stored in them.
713          */
714         if (!nv_connector->edid && !nv_connector->native_mode &&
715             !dev_priv->vbios.fp_no_ddc) {
716                 struct edid *edid =
717                         (struct edid *)nouveau_bios_embedded_edid(dev);
718                 if (edid) {
719                         nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
720                         *(nv_connector->edid) = *edid;
721                 }
722         }
723
724         if (!nv_connector->edid)
725                 goto out;
726
727         /* We didn't find/use a panel mode from the VBIOS, so parse the EDID
728          * block and look for the preferred mode there.
729          */
730         ret = drm_add_edid_modes(connector, nv_connector->edid);
731         if (ret == 0)
732                 goto out;
733         nv_connector->detected_encoder = nv_encoder;
734         nv_connector->native_mode = nouveau_connector_native_mode(connector);
735         list_for_each_entry_safe(mode, temp, &connector->probed_modes, head)
736                 drm_mode_remove(connector, mode);
737
738 out:
739         if (!nv_connector->native_mode) {
740                 NV_ERROR(dev, "LVDS present in DCB table, but couldn't "
741                               "determine its native mode.  Disabling.\n");
742                 return -ENODEV;
743         }
744
745         drm_mode_connector_update_edid_property(connector, nv_connector->edid);
746         return 0;
747 }
748
749 int
750 nouveau_connector_create(struct drm_device *dev,
751                          struct dcb_connector_table_entry *dcb)
752 {
753         struct drm_nouveau_private *dev_priv = dev->dev_private;
754         struct nouveau_connector *nv_connector = NULL;
755         struct drm_connector *connector;
756         struct drm_encoder *encoder;
757         int ret, type;
758
759         NV_DEBUG_KMS(dev, "\n");
760
761         switch (dcb->type) {
762         case DCB_CONNECTOR_NONE:
763                 return 0;
764         case DCB_CONNECTOR_VGA:
765                 NV_INFO(dev, "Detected a VGA connector\n");
766                 type = DRM_MODE_CONNECTOR_VGA;
767                 break;
768         case DCB_CONNECTOR_TV_0:
769         case DCB_CONNECTOR_TV_1:
770         case DCB_CONNECTOR_TV_3:
771                 NV_INFO(dev, "Detected a TV connector\n");
772                 type = DRM_MODE_CONNECTOR_TV;
773                 break;
774         case DCB_CONNECTOR_DVI_I:
775                 NV_INFO(dev, "Detected a DVI-I connector\n");
776                 type = DRM_MODE_CONNECTOR_DVII;
777                 break;
778         case DCB_CONNECTOR_DVI_D:
779                 NV_INFO(dev, "Detected a DVI-D connector\n");
780                 type = DRM_MODE_CONNECTOR_DVID;
781                 break;
782         case DCB_CONNECTOR_HDMI_0:
783         case DCB_CONNECTOR_HDMI_1:
784                 NV_INFO(dev, "Detected a HDMI connector\n");
785                 type = DRM_MODE_CONNECTOR_HDMIA;
786                 break;
787         case DCB_CONNECTOR_LVDS:
788                 NV_INFO(dev, "Detected a LVDS connector\n");
789                 type = DRM_MODE_CONNECTOR_LVDS;
790                 break;
791         case DCB_CONNECTOR_DP:
792                 NV_INFO(dev, "Detected a DisplayPort connector\n");
793                 type = DRM_MODE_CONNECTOR_DisplayPort;
794                 break;
795         case DCB_CONNECTOR_eDP:
796                 NV_INFO(dev, "Detected an eDP connector\n");
797                 type = DRM_MODE_CONNECTOR_eDP;
798                 break;
799         default:
800                 NV_ERROR(dev, "unknown connector type: 0x%02x!!\n", dcb->type);
801                 return -EINVAL;
802         }
803
804         nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL);
805         if (!nv_connector)
806                 return -ENOMEM;
807         nv_connector->dcb = dcb;
808         connector = &nv_connector->base;
809
810         /* defaults, will get overridden in detect() */
811         connector->interlace_allowed = false;
812         connector->doublescan_allowed = false;
813
814         drm_connector_init(dev, connector, &nouveau_connector_funcs, type);
815         drm_connector_helper_add(connector, &nouveau_connector_helper_funcs);
816
817         /* attach encoders */
818         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
819                 struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
820
821                 if (nv_encoder->dcb->connector != dcb->index)
822                         continue;
823
824                 if (get_slave_funcs(nv_encoder))
825                         get_slave_funcs(nv_encoder)->create_resources(encoder, connector);
826
827                 drm_mode_connector_attach_encoder(connector, encoder);
828         }
829
830         if (!connector->encoder_ids[0]) {
831                 NV_WARN(dev, "  no encoders, ignoring\n");
832                 drm_connector_cleanup(connector);
833                 kfree(connector);
834                 return 0;
835         }
836
837         /* Init DVI-I specific properties */
838         if (dcb->type == DCB_CONNECTOR_DVI_I) {
839                 drm_mode_create_dvi_i_properties(dev);
840                 drm_connector_attach_property(connector, dev->mode_config.dvi_i_subconnector_property, 0);
841                 drm_connector_attach_property(connector, dev->mode_config.dvi_i_select_subconnector_property, 0);
842         }
843
844         if (dcb->type != DCB_CONNECTOR_LVDS)
845                 nv_connector->use_dithering = false;
846
847         switch (dcb->type) {
848         case DCB_CONNECTOR_VGA:
849                 connector->polled = DRM_CONNECTOR_POLL_CONNECT;
850                 if (dev_priv->card_type >= NV_50) {
851                         drm_connector_attach_property(connector,
852                                         dev->mode_config.scaling_mode_property,
853                                         nv_connector->scaling_mode);
854                 }
855                 /* fall-through */
856         case DCB_CONNECTOR_TV_0:
857         case DCB_CONNECTOR_TV_1:
858         case DCB_CONNECTOR_TV_3:
859                 nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
860                 break;
861         case DCB_CONNECTOR_DP:
862         case DCB_CONNECTOR_eDP:
863         case DCB_CONNECTOR_HDMI_0:
864         case DCB_CONNECTOR_HDMI_1:
865         case DCB_CONNECTOR_DVI_I:
866         case DCB_CONNECTOR_DVI_D:
867                 if (dev_priv->card_type >= NV_50)
868                         connector->polled = DRM_CONNECTOR_POLL_HPD;
869                 else
870                         connector->polled = DRM_CONNECTOR_POLL_CONNECT;
871                 /* fall-through */
872         default:
873                 nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
874
875                 drm_connector_attach_property(connector,
876                                 dev->mode_config.scaling_mode_property,
877                                 nv_connector->scaling_mode);
878                 drm_connector_attach_property(connector,
879                                 dev->mode_config.dithering_mode_property,
880                                 nv_connector->use_dithering ?
881                                 DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
882                 break;
883         }
884
885         drm_sysfs_connector_add(connector);
886
887         if (dcb->type == DCB_CONNECTOR_LVDS) {
888                 ret = nouveau_connector_create_lvds(dev, connector);
889                 if (ret) {
890                         connector->funcs->destroy(connector);
891                         return ret;
892                 }
893         }
894
895         return 0;
896 }