gpio: add driver for MAX7300 I2C GPIO extender
[safe/jmp/linux-2.6] / drivers / gpio / max7301.c
1 /*
2  * drivers/gpio/max7301.c
3  *
4  * Copyright (C) 2006 Juergen Beisert, Pengutronix
5  * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
6  * Copyright (C) 2009 Wolfram Sang, Pengutronix
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  * Check max730x.c for further details.
13  */
14
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/mutex.h>
19 #include <linux/spi/spi.h>
20 #include <linux/spi/max7301.h>
21
22 /* A write to the MAX7301 means one message with one transfer */
23 static int max7301_spi_write(struct device *dev, unsigned int reg,
24                                 unsigned int val)
25 {
26         struct spi_device *spi = to_spi_device(dev);
27         u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
28
29         return spi_write(spi, (const u8 *)&word, sizeof(word));
30 }
31
32 /* A read from the MAX7301 means two transfers; here, one message each */
33
34 static int max7301_spi_read(struct device *dev, unsigned int reg)
35 {
36         int ret;
37         u16 word;
38         struct spi_device *spi = to_spi_device(dev);
39
40         word = 0x8000 | (reg << 8);
41         ret = spi_write(spi, (const u8 *)&word, sizeof(word));
42         if (ret)
43                 return ret;
44         /*
45          * This relies on the fact, that a transfer with NULL tx_buf shifts out
46          * zero bytes (=NOOP for MAX7301)
47          */
48         ret = spi_read(spi, (u8 *)&word, sizeof(word));
49         if (ret)
50                 return ret;
51         return word & 0xff;
52 }
53
54 static int __devinit max7301_probe(struct spi_device *spi)
55 {
56         struct max7301 *ts;
57         int ret;
58
59         /* bits_per_word cannot be configured in platform data */
60         spi->bits_per_word = 16;
61         ret = spi_setup(spi);
62         if (ret < 0)
63                 return ret;
64
65         ts = kzalloc(sizeof(struct max7301), GFP_KERNEL);
66         if (!ts)
67                 return -ENOMEM;
68
69         ts->read = max7301_spi_read;
70         ts->write = max7301_spi_write;
71         ts->dev = &spi->dev;
72
73         ret = __max730x_probe(ts);
74         if (ret)
75                 kfree(ts);
76         return ret;
77 }
78
79 static int __devexit max7301_remove(struct spi_device *spi)
80 {
81         return __max730x_remove(&spi->dev);
82 }
83
84 static const struct spi_device_id max7301_id[] = {
85         { "max7301", 0 },
86         { }
87 };
88 MODULE_DEVICE_TABLE(spi, max7301_id);
89
90 static struct spi_driver max7301_driver = {
91         .driver = {
92                 .name = "max7301",
93                 .owner = THIS_MODULE,
94         },
95         .probe = max7301_probe,
96         .remove = __devexit_p(max7301_remove),
97         .id_table = max7301_id,
98 };
99
100 static int __init max7301_init(void)
101 {
102         return spi_register_driver(&max7301_driver);
103 }
104 /* register after spi postcore initcall and before
105  * subsys initcalls that may rely on these GPIOs
106  */
107 subsys_initcall(max7301_init);
108
109 static void __exit max7301_exit(void)
110 {
111         spi_unregister_driver(&max7301_driver);
112 }
113 module_exit(max7301_exit);
114
115 MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
116 MODULE_LICENSE("GPL v2");
117 MODULE_DESCRIPTION("MAX7301 GPIO-Expander");