sata_sil24: fix sg table sizing
[safe/jmp/linux-2.6] / drivers / ata / sata_sil24.c
1 /*
2  * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
3  *
4  * Copyright 2005  Tejun Heo
5  *
6  * Based on preview driver from Silicon Image.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of the GNU General Public License as published by the
10  * Free Software Foundation; either version 2, or (at your option) any
11  * later version.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  */
19
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/blkdev.h>
24 #include <linux/delay.h>
25 #include <linux/interrupt.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/device.h>
28 #include <scsi/scsi_host.h>
29 #include <scsi/scsi_cmnd.h>
30 #include <linux/libata.h>
31
32 #define DRV_NAME        "sata_sil24"
33 #define DRV_VERSION     "1.1"
34
35 /*
36  * Port request block (PRB) 32 bytes
37  */
38 struct sil24_prb {
39         __le16  ctrl;
40         __le16  prot;
41         __le32  rx_cnt;
42         u8      fis[6 * 4];
43 };
44
45 /*
46  * Scatter gather entry (SGE) 16 bytes
47  */
48 struct sil24_sge {
49         __le64  addr;
50         __le32  cnt;
51         __le32  flags;
52 };
53
54 /*
55  * Port multiplier
56  */
57 struct sil24_port_multiplier {
58         __le32  diag;
59         __le32  sactive;
60 };
61
62 enum {
63         SIL24_HOST_BAR          = 0,
64         SIL24_PORT_BAR          = 2,
65
66         /* sil24 fetches in chunks of 64bytes.  The first block
67          * contains the PRB and two SGEs.  From the second block, it's
68          * consisted of four SGEs and called SGT.  Calculate the
69          * number of SGTs that fit into one page.
70          */
71         SIL24_PRB_SZ            = sizeof(struct sil24_prb)
72                                   + 2 * sizeof(struct sil24_sge),
73         SIL24_MAX_SGT           = (PAGE_SIZE - SIL24_PRB_SZ)
74                                   / (4 * sizeof(struct sil24_sge)),
75
76         /* This will give us one unused SGEs for ATA.  This extra SGE
77          * will be used to store CDB for ATAPI devices.
78          */
79         SIL24_MAX_SGE           = 4 * SIL24_MAX_SGT + 1,
80
81         /*
82          * Global controller registers (128 bytes @ BAR0)
83          */
84                 /* 32 bit regs */
85         HOST_SLOT_STAT          = 0x00, /* 32 bit slot stat * 4 */
86         HOST_CTRL               = 0x40,
87         HOST_IRQ_STAT           = 0x44,
88         HOST_PHY_CFG            = 0x48,
89         HOST_BIST_CTRL          = 0x50,
90         HOST_BIST_PTRN          = 0x54,
91         HOST_BIST_STAT          = 0x58,
92         HOST_MEM_BIST_STAT      = 0x5c,
93         HOST_FLASH_CMD          = 0x70,
94                 /* 8 bit regs */
95         HOST_FLASH_DATA         = 0x74,
96         HOST_TRANSITION_DETECT  = 0x75,
97         HOST_GPIO_CTRL          = 0x76,
98         HOST_I2C_ADDR           = 0x78, /* 32 bit */
99         HOST_I2C_DATA           = 0x7c,
100         HOST_I2C_XFER_CNT       = 0x7e,
101         HOST_I2C_CTRL           = 0x7f,
102
103         /* HOST_SLOT_STAT bits */
104         HOST_SSTAT_ATTN         = (1 << 31),
105
106         /* HOST_CTRL bits */
107         HOST_CTRL_M66EN         = (1 << 16), /* M66EN PCI bus signal */
108         HOST_CTRL_TRDY          = (1 << 17), /* latched PCI TRDY */
109         HOST_CTRL_STOP          = (1 << 18), /* latched PCI STOP */
110         HOST_CTRL_DEVSEL        = (1 << 19), /* latched PCI DEVSEL */
111         HOST_CTRL_REQ64         = (1 << 20), /* latched PCI REQ64 */
112         HOST_CTRL_GLOBAL_RST    = (1 << 31), /* global reset */
113
114         /*
115          * Port registers
116          * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
117          */
118         PORT_REGS_SIZE          = 0x2000,
119
120         PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
121         PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
122
123         PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
124         PORT_PMP_STATUS         = 0x0000, /* port device status offset */
125         PORT_PMP_QACTIVE        = 0x0004, /* port device QActive offset */
126         PORT_PMP_SIZE           = 0x0008, /* 8 bytes per PMP */
127
128                 /* 32 bit regs */
129         PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
130         PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
131         PORT_IRQ_STAT           = 0x1008, /* high: status, low: interrupt */
132         PORT_IRQ_ENABLE_SET     = 0x1010, /* write: enable-set */
133         PORT_IRQ_ENABLE_CLR     = 0x1014, /* write: enable-clear */
134         PORT_ACTIVATE_UPPER_ADDR= 0x101c,
135         PORT_EXEC_FIFO          = 0x1020, /* command execution fifo */
136         PORT_CMD_ERR            = 0x1024, /* command error number */
137         PORT_FIS_CFG            = 0x1028,
138         PORT_FIFO_THRES         = 0x102c,
139                 /* 16 bit regs */
140         PORT_DECODE_ERR_CNT     = 0x1040,
141         PORT_DECODE_ERR_THRESH  = 0x1042,
142         PORT_CRC_ERR_CNT        = 0x1044,
143         PORT_CRC_ERR_THRESH     = 0x1046,
144         PORT_HSHK_ERR_CNT       = 0x1048,
145         PORT_HSHK_ERR_THRESH    = 0x104a,
146                 /* 32 bit regs */
147         PORT_PHY_CFG            = 0x1050,
148         PORT_SLOT_STAT          = 0x1800,
149         PORT_CMD_ACTIVATE       = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
150         PORT_CONTEXT            = 0x1e04,
151         PORT_EXEC_DIAG          = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
152         PORT_PSD_DIAG           = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
153         PORT_SCONTROL           = 0x1f00,
154         PORT_SSTATUS            = 0x1f04,
155         PORT_SERROR             = 0x1f08,
156         PORT_SACTIVE            = 0x1f0c,
157
158         /* PORT_CTRL_STAT bits */
159         PORT_CS_PORT_RST        = (1 << 0), /* port reset */
160         PORT_CS_DEV_RST         = (1 << 1), /* device reset */
161         PORT_CS_INIT            = (1 << 2), /* port initialize */
162         PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
163         PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
164         PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
165         PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
166         PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
167         PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
168
169         /* PORT_IRQ_STAT/ENABLE_SET/CLR */
170         /* bits[11:0] are masked */
171         PORT_IRQ_COMPLETE       = (1 << 0), /* command(s) completed */
172         PORT_IRQ_ERROR          = (1 << 1), /* command execution error */
173         PORT_IRQ_PORTRDY_CHG    = (1 << 2), /* port ready change */
174         PORT_IRQ_PWR_CHG        = (1 << 3), /* power management change */
175         PORT_IRQ_PHYRDY_CHG     = (1 << 4), /* PHY ready change */
176         PORT_IRQ_COMWAKE        = (1 << 5), /* COMWAKE received */
177         PORT_IRQ_UNK_FIS        = (1 << 6), /* unknown FIS received */
178         PORT_IRQ_DEV_XCHG       = (1 << 7), /* device exchanged */
179         PORT_IRQ_8B10B          = (1 << 8), /* 8b/10b decode error threshold */
180         PORT_IRQ_CRC            = (1 << 9), /* CRC error threshold */
181         PORT_IRQ_HANDSHAKE      = (1 << 10), /* handshake error threshold */
182         PORT_IRQ_SDB_NOTIFY     = (1 << 11), /* SDB notify received */
183
184         DEF_PORT_IRQ            = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
185                                   PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
186                                   PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
187
188         /* bits[27:16] are unmasked (raw) */
189         PORT_IRQ_RAW_SHIFT      = 16,
190         PORT_IRQ_MASKED_MASK    = 0x7ff,
191         PORT_IRQ_RAW_MASK       = (0x7ff << PORT_IRQ_RAW_SHIFT),
192
193         /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
194         PORT_IRQ_STEER_SHIFT    = 30,
195         PORT_IRQ_STEER_MASK     = (3 << PORT_IRQ_STEER_SHIFT),
196
197         /* PORT_CMD_ERR constants */
198         PORT_CERR_DEV           = 1, /* Error bit in D2H Register FIS */
199         PORT_CERR_SDB           = 2, /* Error bit in SDB FIS */
200         PORT_CERR_DATA          = 3, /* Error in data FIS not detected by dev */
201         PORT_CERR_SEND          = 4, /* Initial cmd FIS transmission failure */
202         PORT_CERR_INCONSISTENT  = 5, /* Protocol mismatch */
203         PORT_CERR_DIRECTION     = 6, /* Data direction mismatch */
204         PORT_CERR_UNDERRUN      = 7, /* Ran out of SGEs while writing */
205         PORT_CERR_OVERRUN       = 8, /* Ran out of SGEs while reading */
206         PORT_CERR_PKT_PROT      = 11, /* DIR invalid in 1st PIO setup of ATAPI */
207         PORT_CERR_SGT_BOUNDARY  = 16, /* PLD ecode 00 - SGT not on qword boundary */
208         PORT_CERR_SGT_TGTABRT   = 17, /* PLD ecode 01 - target abort */
209         PORT_CERR_SGT_MSTABRT   = 18, /* PLD ecode 10 - master abort */
210         PORT_CERR_SGT_PCIPERR   = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
211         PORT_CERR_CMD_BOUNDARY  = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
212         PORT_CERR_CMD_TGTABRT   = 25, /* ctrl[15:13] 010 - target abort */
213         PORT_CERR_CMD_MSTABRT   = 26, /* ctrl[15:13] 100 - master abort */
214         PORT_CERR_CMD_PCIPERR   = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
215         PORT_CERR_XFR_UNDEF     = 32, /* PSD ecode 00 - undefined */
216         PORT_CERR_XFR_TGTABRT   = 33, /* PSD ecode 01 - target abort */
217         PORT_CERR_XFR_MSTABRT   = 34, /* PSD ecode 10 - master abort */
218         PORT_CERR_XFR_PCIPERR   = 35, /* PSD ecode 11 - PCI prity err during transfer */
219         PORT_CERR_SENDSERVICE   = 36, /* FIS received while sending service */
220
221         /* bits of PRB control field */
222         PRB_CTRL_PROTOCOL       = (1 << 0), /* override def. ATA protocol */
223         PRB_CTRL_PACKET_READ    = (1 << 4), /* PACKET cmd read */
224         PRB_CTRL_PACKET_WRITE   = (1 << 5), /* PACKET cmd write */
225         PRB_CTRL_NIEN           = (1 << 6), /* Mask completion irq */
226         PRB_CTRL_SRST           = (1 << 7), /* Soft reset request (ign BSY?) */
227
228         /* PRB protocol field */
229         PRB_PROT_PACKET         = (1 << 0),
230         PRB_PROT_TCQ            = (1 << 1),
231         PRB_PROT_NCQ            = (1 << 2),
232         PRB_PROT_READ           = (1 << 3),
233         PRB_PROT_WRITE          = (1 << 4),
234         PRB_PROT_TRANSPARENT    = (1 << 5),
235
236         /*
237          * Other constants
238          */
239         SGE_TRM                 = (1 << 31), /* Last SGE in chain */
240         SGE_LNK                 = (1 << 30), /* linked list
241                                                 Points to SGT, not SGE */
242         SGE_DRD                 = (1 << 29), /* discard data read (/dev/null)
243                                                 data address ignored */
244
245         SIL24_MAX_CMDS          = 31,
246
247         /* board id */
248         BID_SIL3124             = 0,
249         BID_SIL3132             = 1,
250         BID_SIL3131             = 2,
251
252         /* host flags */
253         SIL24_COMMON_FLAGS      = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
254                                   ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
255                                   ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
256                                   ATA_FLAG_AN | ATA_FLAG_PMP,
257         SIL24_COMMON_LFLAGS     = ATA_LFLAG_SKIP_D2H_BSY,
258         SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
259
260         IRQ_STAT_4PORTS         = 0xf,
261 };
262
263 struct sil24_ata_block {
264         struct sil24_prb prb;
265         struct sil24_sge sge[SIL24_MAX_SGE];
266 };
267
268 struct sil24_atapi_block {
269         struct sil24_prb prb;
270         u8 cdb[16];
271         struct sil24_sge sge[SIL24_MAX_SGE];
272 };
273
274 union sil24_cmd_block {
275         struct sil24_ata_block ata;
276         struct sil24_atapi_block atapi;
277 };
278
279 static struct sil24_cerr_info {
280         unsigned int err_mask, action;
281         const char *desc;
282 } sil24_cerr_db[] = {
283         [0]                     = { AC_ERR_DEV, 0,
284                                     "device error" },
285         [PORT_CERR_DEV]         = { AC_ERR_DEV, 0,
286                                     "device error via D2H FIS" },
287         [PORT_CERR_SDB]         = { AC_ERR_DEV, 0,
288                                     "device error via SDB FIS" },
289         [PORT_CERR_DATA]        = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
290                                     "error in data FIS" },
291         [PORT_CERR_SEND]        = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
292                                     "failed to transmit command FIS" },
293         [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
294                                      "protocol mismatch" },
295         [PORT_CERR_DIRECTION]   = { AC_ERR_HSM, ATA_EH_SOFTRESET,
296                                     "data directon mismatch" },
297         [PORT_CERR_UNDERRUN]    = { AC_ERR_HSM, ATA_EH_SOFTRESET,
298                                     "ran out of SGEs while writing" },
299         [PORT_CERR_OVERRUN]     = { AC_ERR_HSM, ATA_EH_SOFTRESET,
300                                     "ran out of SGEs while reading" },
301         [PORT_CERR_PKT_PROT]    = { AC_ERR_HSM, ATA_EH_SOFTRESET,
302                                     "invalid data directon for ATAPI CDB" },
303         [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
304                                      "SGT no on qword boundary" },
305         [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
306                                     "PCI target abort while fetching SGT" },
307         [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
308                                     "PCI master abort while fetching SGT" },
309         [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
310                                     "PCI parity error while fetching SGT" },
311         [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
312                                      "PRB not on qword boundary" },
313         [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
314                                     "PCI target abort while fetching PRB" },
315         [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
316                                     "PCI master abort while fetching PRB" },
317         [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
318                                     "PCI parity error while fetching PRB" },
319         [PORT_CERR_XFR_UNDEF]   = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
320                                     "undefined error while transferring data" },
321         [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
322                                     "PCI target abort while transferring data" },
323         [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
324                                     "PCI master abort while transferring data" },
325         [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
326                                     "PCI parity error while transferring data" },
327         [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
328                                     "FIS received while sending service FIS" },
329 };
330
331 /*
332  * ap->private_data
333  *
334  * The preview driver always returned 0 for status.  We emulate it
335  * here from the previous interrupt.
336  */
337 struct sil24_port_priv {
338         union sil24_cmd_block *cmd_block;       /* 32 cmd blocks */
339         dma_addr_t cmd_block_dma;               /* DMA base addr for them */
340         struct ata_taskfile tf;                 /* Cached taskfile registers */
341         int do_port_rst;
342 };
343
344 static void sil24_dev_config(struct ata_device *dev);
345 static u8 sil24_check_status(struct ata_port *ap);
346 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val);
347 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
348 static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
349 static int sil24_qc_defer(struct ata_queued_cmd *qc);
350 static void sil24_qc_prep(struct ata_queued_cmd *qc);
351 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
352 static void sil24_irq_clear(struct ata_port *ap);
353 static void sil24_pmp_attach(struct ata_port *ap);
354 static void sil24_pmp_detach(struct ata_port *ap);
355 static void sil24_freeze(struct ata_port *ap);
356 static void sil24_thaw(struct ata_port *ap);
357 static void sil24_error_handler(struct ata_port *ap);
358 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
359 static int sil24_port_start(struct ata_port *ap);
360 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
361 #ifdef CONFIG_PM
362 static int sil24_pci_device_resume(struct pci_dev *pdev);
363 static int sil24_port_resume(struct ata_port *ap);
364 #endif
365
366 static const struct pci_device_id sil24_pci_tbl[] = {
367         { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
368         { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
369         { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
370         { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
371         { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
372         { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
373
374         { } /* terminate list */
375 };
376
377 static struct pci_driver sil24_pci_driver = {
378         .name                   = DRV_NAME,
379         .id_table               = sil24_pci_tbl,
380         .probe                  = sil24_init_one,
381         .remove                 = ata_pci_remove_one,
382 #ifdef CONFIG_PM
383         .suspend                = ata_pci_device_suspend,
384         .resume                 = sil24_pci_device_resume,
385 #endif
386 };
387
388 static struct scsi_host_template sil24_sht = {
389         .module                 = THIS_MODULE,
390         .name                   = DRV_NAME,
391         .ioctl                  = ata_scsi_ioctl,
392         .queuecommand           = ata_scsi_queuecmd,
393         .change_queue_depth     = ata_scsi_change_queue_depth,
394         .can_queue              = SIL24_MAX_CMDS,
395         .this_id                = ATA_SHT_THIS_ID,
396         .sg_tablesize           = SIL24_MAX_SGE,
397         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
398         .emulated               = ATA_SHT_EMULATED,
399         .use_clustering         = ATA_SHT_USE_CLUSTERING,
400         .proc_name              = DRV_NAME,
401         .dma_boundary           = ATA_DMA_BOUNDARY,
402         .slave_configure        = ata_scsi_slave_config,
403         .slave_destroy          = ata_scsi_slave_destroy,
404         .bios_param             = ata_std_bios_param,
405 };
406
407 static const struct ata_port_operations sil24_ops = {
408         .dev_config             = sil24_dev_config,
409
410         .check_status           = sil24_check_status,
411         .check_altstatus        = sil24_check_status,
412         .dev_select             = ata_noop_dev_select,
413
414         .tf_read                = sil24_tf_read,
415
416         .qc_defer               = sil24_qc_defer,
417         .qc_prep                = sil24_qc_prep,
418         .qc_issue               = sil24_qc_issue,
419
420         .irq_clear              = sil24_irq_clear,
421
422         .scr_read               = sil24_scr_read,
423         .scr_write              = sil24_scr_write,
424
425         .pmp_attach             = sil24_pmp_attach,
426         .pmp_detach             = sil24_pmp_detach,
427
428         .freeze                 = sil24_freeze,
429         .thaw                   = sil24_thaw,
430         .error_handler          = sil24_error_handler,
431         .post_internal_cmd      = sil24_post_internal_cmd,
432
433         .port_start             = sil24_port_start,
434
435 #ifdef CONFIG_PM
436         .port_resume            = sil24_port_resume,
437 #endif
438 };
439
440 /*
441  * Use bits 30-31 of port_flags to encode available port numbers.
442  * Current maxium is 4.
443  */
444 #define SIL24_NPORTS2FLAG(nports)       ((((unsigned)(nports) - 1) & 0x3) << 30)
445 #define SIL24_FLAG2NPORTS(flag)         ((((flag) >> 30) & 0x3) + 1)
446
447 static const struct ata_port_info sil24_port_info[] = {
448         /* sil_3124 */
449         {
450                 .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
451                                   SIL24_FLAG_PCIX_IRQ_WOC,
452                 .link_flags     = SIL24_COMMON_LFLAGS,
453                 .pio_mask       = 0x1f,                 /* pio0-4 */
454                 .mwdma_mask     = 0x07,                 /* mwdma0-2 */
455                 .udma_mask      = ATA_UDMA5,            /* udma0-5 */
456                 .port_ops       = &sil24_ops,
457         },
458         /* sil_3132 */
459         {
460                 .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
461                 .link_flags     = SIL24_COMMON_LFLAGS,
462                 .pio_mask       = 0x1f,                 /* pio0-4 */
463                 .mwdma_mask     = 0x07,                 /* mwdma0-2 */
464                 .udma_mask      = ATA_UDMA5,            /* udma0-5 */
465                 .port_ops       = &sil24_ops,
466         },
467         /* sil_3131/sil_3531 */
468         {
469                 .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
470                 .link_flags     = SIL24_COMMON_LFLAGS,
471                 .pio_mask       = 0x1f,                 /* pio0-4 */
472                 .mwdma_mask     = 0x07,                 /* mwdma0-2 */
473                 .udma_mask      = ATA_UDMA5,            /* udma0-5 */
474                 .port_ops       = &sil24_ops,
475         },
476 };
477
478 static int sil24_tag(int tag)
479 {
480         if (unlikely(ata_tag_internal(tag)))
481                 return 0;
482         return tag;
483 }
484
485 static void sil24_dev_config(struct ata_device *dev)
486 {
487         void __iomem *port = dev->link->ap->ioaddr.cmd_addr;
488
489         if (dev->cdb_len == 16)
490                 writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
491         else
492                 writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
493 }
494
495 static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
496 {
497         void __iomem *port = ap->ioaddr.cmd_addr;
498         struct sil24_prb __iomem *prb;
499         u8 fis[6 * 4];
500
501         prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
502         memcpy_fromio(fis, prb->fis, sizeof(fis));
503         ata_tf_from_fis(fis, tf);
504 }
505
506 static u8 sil24_check_status(struct ata_port *ap)
507 {
508         struct sil24_port_priv *pp = ap->private_data;
509         return pp->tf.command;
510 }
511
512 static int sil24_scr_map[] = {
513         [SCR_CONTROL]   = 0,
514         [SCR_STATUS]    = 1,
515         [SCR_ERROR]     = 2,
516         [SCR_ACTIVE]    = 3,
517 };
518
519 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
520 {
521         void __iomem *scr_addr = ap->ioaddr.scr_addr;
522
523         if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
524                 void __iomem *addr;
525                 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
526                 *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
527                 return 0;
528         }
529         return -EINVAL;
530 }
531
532 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
533 {
534         void __iomem *scr_addr = ap->ioaddr.scr_addr;
535
536         if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
537                 void __iomem *addr;
538                 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
539                 writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
540                 return 0;
541         }
542         return -EINVAL;
543 }
544
545 static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
546 {
547         struct sil24_port_priv *pp = ap->private_data;
548         *tf = pp->tf;
549 }
550
551 static void sil24_config_port(struct ata_port *ap)
552 {
553         void __iomem *port = ap->ioaddr.cmd_addr;
554
555         /* configure IRQ WoC */
556         if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
557                 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
558         else
559                 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
560
561         /* zero error counters. */
562         writel(0x8000, port + PORT_DECODE_ERR_THRESH);
563         writel(0x8000, port + PORT_CRC_ERR_THRESH);
564         writel(0x8000, port + PORT_HSHK_ERR_THRESH);
565         writel(0x0000, port + PORT_DECODE_ERR_CNT);
566         writel(0x0000, port + PORT_CRC_ERR_CNT);
567         writel(0x0000, port + PORT_HSHK_ERR_CNT);
568
569         /* always use 64bit activation */
570         writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
571
572         /* clear port multiplier enable and resume bits */
573         writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
574 }
575
576 static void sil24_config_pmp(struct ata_port *ap, int attached)
577 {
578         void __iomem *port = ap->ioaddr.cmd_addr;
579
580         if (attached)
581                 writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
582         else
583                 writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
584 }
585
586 static void sil24_clear_pmp(struct ata_port *ap)
587 {
588         void __iomem *port = ap->ioaddr.cmd_addr;
589         int i;
590
591         writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
592
593         for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
594                 void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
595
596                 writel(0, pmp_base + PORT_PMP_STATUS);
597                 writel(0, pmp_base + PORT_PMP_QACTIVE);
598         }
599 }
600
601 static int sil24_init_port(struct ata_port *ap)
602 {
603         void __iomem *port = ap->ioaddr.cmd_addr;
604         struct sil24_port_priv *pp = ap->private_data;
605         u32 tmp;
606
607         /* clear PMP error status */
608         if (ap->nr_pmp_links)
609                 sil24_clear_pmp(ap);
610
611         writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
612         ata_wait_register(port + PORT_CTRL_STAT,
613                           PORT_CS_INIT, PORT_CS_INIT, 10, 100);
614         tmp = ata_wait_register(port + PORT_CTRL_STAT,
615                                 PORT_CS_RDY, 0, 10, 100);
616
617         if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
618                 pp->do_port_rst = 1;
619                 ap->link.eh_context.i.action |= ATA_EH_HARDRESET;
620                 return -EIO;
621         }
622
623         return 0;
624 }
625
626 static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
627                                  const struct ata_taskfile *tf,
628                                  int is_cmd, u32 ctrl,
629                                  unsigned long timeout_msec)
630 {
631         void __iomem *port = ap->ioaddr.cmd_addr;
632         struct sil24_port_priv *pp = ap->private_data;
633         struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
634         dma_addr_t paddr = pp->cmd_block_dma;
635         u32 irq_enabled, irq_mask, irq_stat;
636         int rc;
637
638         prb->ctrl = cpu_to_le16(ctrl);
639         ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
640
641         /* temporarily plug completion and error interrupts */
642         irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
643         writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
644
645         writel((u32)paddr, port + PORT_CMD_ACTIVATE);
646         writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
647
648         irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
649         irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0,
650                                      10, timeout_msec);
651
652         writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
653         irq_stat >>= PORT_IRQ_RAW_SHIFT;
654
655         if (irq_stat & PORT_IRQ_COMPLETE)
656                 rc = 0;
657         else {
658                 /* force port into known state */
659                 sil24_init_port(ap);
660
661                 if (irq_stat & PORT_IRQ_ERROR)
662                         rc = -EIO;
663                 else
664                         rc = -EBUSY;
665         }
666
667         /* restore IRQ enabled */
668         writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
669
670         return rc;
671 }
672
673 static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
674                               int pmp, unsigned long deadline)
675 {
676         struct ata_port *ap = link->ap;
677         unsigned long timeout_msec = 0;
678         struct ata_taskfile tf;
679         const char *reason;
680         int rc;
681
682         DPRINTK("ENTER\n");
683
684         if (ata_link_offline(link)) {
685                 DPRINTK("PHY reports no device\n");
686                 *class = ATA_DEV_NONE;
687                 goto out;
688         }
689
690         /* put the port into known state */
691         if (sil24_init_port(ap)) {
692                 reason = "port not ready";
693                 goto err;
694         }
695
696         /* do SRST */
697         if (time_after(deadline, jiffies))
698                 timeout_msec = jiffies_to_msecs(deadline - jiffies);
699
700         ata_tf_init(link->device, &tf); /* doesn't really matter */
701         rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
702                                    timeout_msec);
703         if (rc == -EBUSY) {
704                 reason = "timeout";
705                 goto err;
706         } else if (rc) {
707                 reason = "SRST command error";
708                 goto err;
709         }
710
711         sil24_read_tf(ap, 0, &tf);
712         *class = ata_dev_classify(&tf);
713
714         if (*class == ATA_DEV_UNKNOWN)
715                 *class = ATA_DEV_NONE;
716
717  out:
718         DPRINTK("EXIT, class=%u\n", *class);
719         return 0;
720
721  err:
722         ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
723         return -EIO;
724 }
725
726 static int sil24_softreset(struct ata_link *link, unsigned int *class,
727                            unsigned long deadline)
728 {
729         return sil24_do_softreset(link, class, SATA_PMP_CTRL_PORT, deadline);
730 }
731
732 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
733                            unsigned long deadline)
734 {
735         struct ata_port *ap = link->ap;
736         void __iomem *port = ap->ioaddr.cmd_addr;
737         struct sil24_port_priv *pp = ap->private_data;
738         int did_port_rst = 0;
739         const char *reason;
740         int tout_msec, rc;
741         u32 tmp;
742
743  retry:
744         /* Sometimes, DEV_RST is not enough to recover the controller.
745          * This happens often after PM DMA CS errata.
746          */
747         if (pp->do_port_rst) {
748                 ata_port_printk(ap, KERN_WARNING, "controller in dubious "
749                                 "state, performing PORT_RST\n");
750
751                 writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
752                 msleep(10);
753                 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
754                 ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
755                                   10, 5000);
756
757                 /* restore port configuration */
758                 sil24_config_port(ap);
759                 sil24_config_pmp(ap, ap->nr_pmp_links);
760
761                 pp->do_port_rst = 0;
762                 did_port_rst = 1;
763         }
764
765         /* sil24 does the right thing(tm) without any protection */
766         sata_set_spd(link);
767
768         tout_msec = 100;
769         if (ata_link_online(link))
770                 tout_msec = 5000;
771
772         writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
773         tmp = ata_wait_register(port + PORT_CTRL_STAT,
774                                 PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
775                                 tout_msec);
776
777         /* SStatus oscillates between zero and valid status after
778          * DEV_RST, debounce it.
779          */
780         rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
781         if (rc) {
782                 reason = "PHY debouncing failed";
783                 goto err;
784         }
785
786         if (tmp & PORT_CS_DEV_RST) {
787                 if (ata_link_offline(link))
788                         return 0;
789                 reason = "link not ready";
790                 goto err;
791         }
792
793         /* Sil24 doesn't store signature FIS after hardreset, so we
794          * can't wait for BSY to clear.  Some devices take a long time
795          * to get ready and those devices will choke if we don't wait
796          * for BSY clearance here.  Tell libata to perform follow-up
797          * softreset.
798          */
799         return -EAGAIN;
800
801  err:
802         if (!did_port_rst) {
803                 pp->do_port_rst = 1;
804                 goto retry;
805         }
806
807         ata_link_printk(link, KERN_ERR, "hardreset failed (%s)\n", reason);
808         return -EIO;
809 }
810
811 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
812                                  struct sil24_sge *sge)
813 {
814         struct scatterlist *sg;
815         struct sil24_sge *last_sge = NULL;
816
817         ata_for_each_sg(sg, qc) {
818                 sge->addr = cpu_to_le64(sg_dma_address(sg));
819                 sge->cnt = cpu_to_le32(sg_dma_len(sg));
820                 sge->flags = 0;
821
822                 last_sge = sge;
823                 sge++;
824         }
825
826         if (likely(last_sge))
827                 last_sge->flags = cpu_to_le32(SGE_TRM);
828 }
829
830 static int sil24_qc_defer(struct ata_queued_cmd *qc)
831 {
832         struct ata_link *link = qc->dev->link;
833         struct ata_port *ap = link->ap;
834         u8 prot = qc->tf.protocol;
835         int is_atapi = (prot == ATA_PROT_ATAPI ||
836                         prot == ATA_PROT_ATAPI_NODATA ||
837                         prot == ATA_PROT_ATAPI_DMA);
838
839         /* ATAPI commands completing with CHECK_SENSE cause various
840          * weird problems if other commands are active.  PMP DMA CS
841          * errata doesn't cover all and HSM violation occurs even with
842          * only one other device active.  Always run an ATAPI command
843          * by itself.
844          */
845         if (unlikely(ap->excl_link)) {
846                 if (link == ap->excl_link) {
847                         if (ap->nr_active_links)
848                                 return ATA_DEFER_PORT;
849                         qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
850                 } else
851                         return ATA_DEFER_PORT;
852         } else if (unlikely(is_atapi)) {
853                 ap->excl_link = link;
854                 if (ap->nr_active_links)
855                         return ATA_DEFER_PORT;
856                 qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
857         }
858
859         return ata_std_qc_defer(qc);
860 }
861
862 static void sil24_qc_prep(struct ata_queued_cmd *qc)
863 {
864         struct ata_port *ap = qc->ap;
865         struct sil24_port_priv *pp = ap->private_data;
866         union sil24_cmd_block *cb;
867         struct sil24_prb *prb;
868         struct sil24_sge *sge;
869         u16 ctrl = 0;
870
871         cb = &pp->cmd_block[sil24_tag(qc->tag)];
872
873         switch (qc->tf.protocol) {
874         case ATA_PROT_PIO:
875         case ATA_PROT_DMA:
876         case ATA_PROT_NCQ:
877         case ATA_PROT_NODATA:
878                 prb = &cb->ata.prb;
879                 sge = cb->ata.sge;
880                 break;
881
882         case ATA_PROT_ATAPI:
883         case ATA_PROT_ATAPI_DMA:
884         case ATA_PROT_ATAPI_NODATA:
885                 prb = &cb->atapi.prb;
886                 sge = cb->atapi.sge;
887                 memset(cb->atapi.cdb, 0, 32);
888                 memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
889
890                 if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
891                         if (qc->tf.flags & ATA_TFLAG_WRITE)
892                                 ctrl = PRB_CTRL_PACKET_WRITE;
893                         else
894                                 ctrl = PRB_CTRL_PACKET_READ;
895                 }
896                 break;
897
898         default:
899                 prb = NULL;     /* shut up, gcc */
900                 sge = NULL;
901                 BUG();
902         }
903
904         prb->ctrl = cpu_to_le16(ctrl);
905         ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
906
907         if (qc->flags & ATA_QCFLAG_DMAMAP)
908                 sil24_fill_sg(qc, sge);
909 }
910
911 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
912 {
913         struct ata_port *ap = qc->ap;
914         struct sil24_port_priv *pp = ap->private_data;
915         void __iomem *port = ap->ioaddr.cmd_addr;
916         unsigned int tag = sil24_tag(qc->tag);
917         dma_addr_t paddr;
918         void __iomem *activate;
919
920         paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
921         activate = port + PORT_CMD_ACTIVATE + tag * 8;
922
923         writel((u32)paddr, activate);
924         writel((u64)paddr >> 32, activate + 4);
925
926         return 0;
927 }
928
929 static void sil24_irq_clear(struct ata_port *ap)
930 {
931         /* unused */
932 }
933
934 static void sil24_pmp_attach(struct ata_port *ap)
935 {
936         sil24_config_pmp(ap, 1);
937         sil24_init_port(ap);
938 }
939
940 static void sil24_pmp_detach(struct ata_port *ap)
941 {
942         sil24_init_port(ap);
943         sil24_config_pmp(ap, 0);
944 }
945
946 static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class,
947                                unsigned long deadline)
948 {
949         return sil24_do_softreset(link, class, link->pmp, deadline);
950 }
951
952 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
953                                unsigned long deadline)
954 {
955         int rc;
956
957         rc = sil24_init_port(link->ap);
958         if (rc) {
959                 ata_link_printk(link, KERN_ERR,
960                                 "hardreset failed (port not ready)\n");
961                 return rc;
962         }
963
964         return sata_pmp_std_hardreset(link, class, deadline);
965 }
966
967 static void sil24_freeze(struct ata_port *ap)
968 {
969         void __iomem *port = ap->ioaddr.cmd_addr;
970
971         /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
972          * PORT_IRQ_ENABLE instead.
973          */
974         writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
975 }
976
977 static void sil24_thaw(struct ata_port *ap)
978 {
979         void __iomem *port = ap->ioaddr.cmd_addr;
980         u32 tmp;
981
982         /* clear IRQ */
983         tmp = readl(port + PORT_IRQ_STAT);
984         writel(tmp, port + PORT_IRQ_STAT);
985
986         /* turn IRQ back on */
987         writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
988 }
989
990 static void sil24_error_intr(struct ata_port *ap)
991 {
992         void __iomem *port = ap->ioaddr.cmd_addr;
993         struct sil24_port_priv *pp = ap->private_data;
994         struct ata_queued_cmd *qc = NULL;
995         struct ata_link *link;
996         struct ata_eh_info *ehi;
997         int abort = 0, freeze = 0;
998         u32 irq_stat;
999
1000         /* on error, we need to clear IRQ explicitly */
1001         irq_stat = readl(port + PORT_IRQ_STAT);
1002         writel(irq_stat, port + PORT_IRQ_STAT);
1003
1004         /* first, analyze and record host port events */
1005         link = &ap->link;
1006         ehi = &link->eh_info;
1007         ata_ehi_clear_desc(ehi);
1008
1009         ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
1010
1011         if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
1012                 ata_ehi_push_desc(ehi, "SDB notify");
1013                 sata_async_notification(ap);
1014         }
1015
1016         if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
1017                 ata_ehi_hotplugged(ehi);
1018                 ata_ehi_push_desc(ehi, "%s",
1019                                   irq_stat & PORT_IRQ_PHYRDY_CHG ?
1020                                   "PHY RDY changed" : "device exchanged");
1021                 freeze = 1;
1022         }
1023
1024         if (irq_stat & PORT_IRQ_UNK_FIS) {
1025                 ehi->err_mask |= AC_ERR_HSM;
1026                 ehi->action |= ATA_EH_SOFTRESET;
1027                 ata_ehi_push_desc(ehi, "unknown FIS");
1028                 freeze = 1;
1029         }
1030
1031         /* deal with command error */
1032         if (irq_stat & PORT_IRQ_ERROR) {
1033                 struct sil24_cerr_info *ci = NULL;
1034                 unsigned int err_mask = 0, action = 0;
1035                 u32 context, cerr;
1036                 int pmp;
1037
1038                 abort = 1;
1039
1040                 /* DMA Context Switch Failure in Port Multiplier Mode
1041                  * errata.  If we have active commands to 3 or more
1042                  * devices, any error condition on active devices can
1043                  * corrupt DMA context switching.
1044                  */
1045                 if (ap->nr_active_links >= 3) {
1046                         ehi->err_mask |= AC_ERR_OTHER;
1047                         ehi->action |= ATA_EH_HARDRESET;
1048                         ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1049                         pp->do_port_rst = 1;
1050                         freeze = 1;
1051                 }
1052
1053                 /* find out the offending link and qc */
1054                 if (ap->nr_pmp_links) {
1055                         context = readl(port + PORT_CONTEXT);
1056                         pmp = (context >> 5) & 0xf;
1057
1058                         if (pmp < ap->nr_pmp_links) {
1059                                 link = &ap->pmp_link[pmp];
1060                                 ehi = &link->eh_info;
1061                                 qc = ata_qc_from_tag(ap, link->active_tag);
1062
1063                                 ata_ehi_clear_desc(ehi);
1064                                 ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1065                                                   irq_stat);
1066                         } else {
1067                                 err_mask |= AC_ERR_HSM;
1068                                 action |= ATA_EH_HARDRESET;
1069                                 freeze = 1;
1070                         }
1071                 } else
1072                         qc = ata_qc_from_tag(ap, link->active_tag);
1073
1074                 /* analyze CMD_ERR */
1075                 cerr = readl(port + PORT_CMD_ERR);
1076                 if (cerr < ARRAY_SIZE(sil24_cerr_db))
1077                         ci = &sil24_cerr_db[cerr];
1078
1079                 if (ci && ci->desc) {
1080                         err_mask |= ci->err_mask;
1081                         action |= ci->action;
1082                         ata_ehi_push_desc(ehi, "%s", ci->desc);
1083                 } else {
1084                         err_mask |= AC_ERR_OTHER;
1085                         action |= ATA_EH_SOFTRESET;
1086                         ata_ehi_push_desc(ehi, "unknown command error %d",
1087                                           cerr);
1088                 }
1089
1090                 /* record error info */
1091                 if (qc) {
1092                         sil24_read_tf(ap, qc->tag, &pp->tf);
1093                         qc->err_mask |= err_mask;
1094                 } else
1095                         ehi->err_mask |= err_mask;
1096
1097                 ehi->action |= action;
1098
1099                 /* if PMP, resume */
1100                 if (ap->nr_pmp_links)
1101                         writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1102         }
1103
1104         /* freeze or abort */
1105         if (freeze)
1106                 ata_port_freeze(ap);
1107         else if (abort) {
1108                 if (qc)
1109                         ata_link_abort(qc->dev->link);
1110                 else
1111                         ata_port_abort(ap);
1112         }
1113 }
1114
1115 static void sil24_finish_qc(struct ata_queued_cmd *qc)
1116 {
1117         struct ata_port *ap = qc->ap;
1118         struct sil24_port_priv *pp = ap->private_data;
1119
1120         if (qc->flags & ATA_QCFLAG_RESULT_TF)
1121                 sil24_read_tf(ap, qc->tag, &pp->tf);
1122 }
1123
1124 static inline void sil24_host_intr(struct ata_port *ap)
1125 {
1126         void __iomem *port = ap->ioaddr.cmd_addr;
1127         u32 slot_stat, qc_active;
1128         int rc;
1129
1130         /* If PCIX_IRQ_WOC, there's an inherent race window between
1131          * clearing IRQ pending status and reading PORT_SLOT_STAT
1132          * which may cause spurious interrupts afterwards.  This is
1133          * unavoidable and much better than losing interrupts which
1134          * happens if IRQ pending is cleared after reading
1135          * PORT_SLOT_STAT.
1136          */
1137         if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1138                 writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1139
1140         slot_stat = readl(port + PORT_SLOT_STAT);
1141
1142         if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1143                 sil24_error_intr(ap);
1144                 return;
1145         }
1146
1147         qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1148         rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
1149         if (rc > 0)
1150                 return;
1151         if (rc < 0) {
1152                 struct ata_eh_info *ehi = &ap->link.eh_info;
1153                 ehi->err_mask |= AC_ERR_HSM;
1154                 ehi->action |= ATA_EH_SOFTRESET;
1155                 ata_port_freeze(ap);
1156                 return;
1157         }
1158
1159         /* spurious interrupts are expected if PCIX_IRQ_WOC */
1160         if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1161                 ata_port_printk(ap, KERN_INFO, "spurious interrupt "
1162                         "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1163                         slot_stat, ap->link.active_tag, ap->link.sactive);
1164 }
1165
1166 static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1167 {
1168         struct ata_host *host = dev_instance;
1169         void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1170         unsigned handled = 0;
1171         u32 status;
1172         int i;
1173
1174         status = readl(host_base + HOST_IRQ_STAT);
1175
1176         if (status == 0xffffffff) {
1177                 printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
1178                        "PCI fault or device removal?\n");
1179                 goto out;
1180         }
1181
1182         if (!(status & IRQ_STAT_4PORTS))
1183                 goto out;
1184
1185         spin_lock(&host->lock);
1186
1187         for (i = 0; i < host->n_ports; i++)
1188                 if (status & (1 << i)) {
1189                         struct ata_port *ap = host->ports[i];
1190                         if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
1191                                 sil24_host_intr(ap);
1192                                 handled++;
1193                         } else
1194                                 printk(KERN_ERR DRV_NAME
1195                                        ": interrupt from disabled port %d\n", i);
1196                 }
1197
1198         spin_unlock(&host->lock);
1199  out:
1200         return IRQ_RETVAL(handled);
1201 }
1202
1203 static void sil24_error_handler(struct ata_port *ap)
1204 {
1205         struct sil24_port_priv *pp = ap->private_data;
1206
1207         if (sil24_init_port(ap))
1208                 ata_eh_freeze_port(ap);
1209
1210         /* perform recovery */
1211         sata_pmp_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
1212                        ata_std_postreset, sata_pmp_std_prereset,
1213                        sil24_pmp_softreset, sil24_pmp_hardreset,
1214                        sata_pmp_std_postreset);
1215
1216         pp->do_port_rst = 0;
1217 }
1218
1219 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1220 {
1221         struct ata_port *ap = qc->ap;
1222
1223         /* make DMA engine forget about the failed command */
1224         if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1225                 ata_eh_freeze_port(ap);
1226 }
1227
1228 static int sil24_port_start(struct ata_port *ap)
1229 {
1230         struct device *dev = ap->host->dev;
1231         struct sil24_port_priv *pp;
1232         union sil24_cmd_block *cb;
1233         size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1234         dma_addr_t cb_dma;
1235         int rc;
1236
1237         pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1238         if (!pp)
1239                 return -ENOMEM;
1240
1241         pp->tf.command = ATA_DRDY;
1242
1243         cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1244         if (!cb)
1245                 return -ENOMEM;
1246         memset(cb, 0, cb_size);
1247
1248         rc = ata_pad_alloc(ap, dev);
1249         if (rc)
1250                 return rc;
1251
1252         pp->cmd_block = cb;
1253         pp->cmd_block_dma = cb_dma;
1254
1255         ap->private_data = pp;
1256
1257         return 0;
1258 }
1259
1260 static void sil24_init_controller(struct ata_host *host)
1261 {
1262         void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1263         u32 tmp;
1264         int i;
1265
1266         /* GPIO off */
1267         writel(0, host_base + HOST_FLASH_CMD);
1268
1269         /* clear global reset & mask interrupts during initialization */
1270         writel(0, host_base + HOST_CTRL);
1271
1272         /* init ports */
1273         for (i = 0; i < host->n_ports; i++) {
1274                 struct ata_port *ap = host->ports[i];
1275                 void __iomem *port = ap->ioaddr.cmd_addr;
1276
1277                 /* Initial PHY setting */
1278                 writel(0x20c, port + PORT_PHY_CFG);
1279
1280                 /* Clear port RST */
1281                 tmp = readl(port + PORT_CTRL_STAT);
1282                 if (tmp & PORT_CS_PORT_RST) {
1283                         writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1284                         tmp = ata_wait_register(port + PORT_CTRL_STAT,
1285                                                 PORT_CS_PORT_RST,
1286                                                 PORT_CS_PORT_RST, 10, 100);
1287                         if (tmp & PORT_CS_PORT_RST)
1288                                 dev_printk(KERN_ERR, host->dev,
1289                                            "failed to clear port RST\n");
1290                 }
1291
1292                 /* configure port */
1293                 sil24_config_port(ap);
1294         }
1295
1296         /* Turn on interrupts */
1297         writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1298 }
1299
1300 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1301 {
1302         extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1303         static int printed_version;
1304         struct ata_port_info pi = sil24_port_info[ent->driver_data];
1305         const struct ata_port_info *ppi[] = { &pi, NULL };
1306         void __iomem * const *iomap;
1307         struct ata_host *host;
1308         int i, rc;
1309         u32 tmp;
1310
1311         /* cause link error if sil24_cmd_block is sized wrongly */
1312         if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1313                 __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1314
1315         if (!printed_version++)
1316                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
1317
1318         /* acquire resources */
1319         rc = pcim_enable_device(pdev);
1320         if (rc)
1321                 return rc;
1322
1323         rc = pcim_iomap_regions(pdev,
1324                                 (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1325                                 DRV_NAME);
1326         if (rc)
1327                 return rc;
1328         iomap = pcim_iomap_table(pdev);
1329
1330         /* apply workaround for completion IRQ loss on PCI-X errata */
1331         if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1332                 tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1333                 if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1334                         dev_printk(KERN_INFO, &pdev->dev,
1335                                    "Applying completion IRQ loss on PCI-X "
1336                                    "errata fix\n");
1337                 else
1338                         pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1339         }
1340
1341         /* allocate and fill host */
1342         host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1343                                     SIL24_FLAG2NPORTS(ppi[0]->flags));
1344         if (!host)
1345                 return -ENOMEM;
1346         host->iomap = iomap;
1347
1348         for (i = 0; i < host->n_ports; i++) {
1349                 struct ata_port *ap = host->ports[i];
1350                 size_t offset = ap->port_no * PORT_REGS_SIZE;
1351                 void __iomem *port = iomap[SIL24_PORT_BAR] + offset;
1352
1353                 host->ports[i]->ioaddr.cmd_addr = port;
1354                 host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
1355
1356                 ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1357                 ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port");
1358         }
1359
1360         /* configure and activate the device */
1361         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
1362                 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
1363                 if (rc) {
1364                         rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
1365                         if (rc) {
1366                                 dev_printk(KERN_ERR, &pdev->dev,
1367                                            "64-bit DMA enable failed\n");
1368                                 return rc;
1369                         }
1370                 }
1371         } else {
1372                 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
1373                 if (rc) {
1374                         dev_printk(KERN_ERR, &pdev->dev,
1375                                    "32-bit DMA enable failed\n");
1376                         return rc;
1377                 }
1378                 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
1379                 if (rc) {
1380                         dev_printk(KERN_ERR, &pdev->dev,
1381                                    "32-bit consistent DMA enable failed\n");
1382                         return rc;
1383                 }
1384         }
1385
1386         sil24_init_controller(host);
1387
1388         pci_set_master(pdev);
1389         return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1390                                  &sil24_sht);
1391 }
1392
1393 #ifdef CONFIG_PM
1394 static int sil24_pci_device_resume(struct pci_dev *pdev)
1395 {
1396         struct ata_host *host = dev_get_drvdata(&pdev->dev);
1397         void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1398         int rc;
1399
1400         rc = ata_pci_device_do_resume(pdev);
1401         if (rc)
1402                 return rc;
1403
1404         if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1405                 writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1406
1407         sil24_init_controller(host);
1408
1409         ata_host_resume(host);
1410
1411         return 0;
1412 }
1413
1414 static int sil24_port_resume(struct ata_port *ap)
1415 {
1416         sil24_config_pmp(ap, ap->nr_pmp_links);
1417         return 0;
1418 }
1419 #endif
1420
1421 static int __init sil24_init(void)
1422 {
1423         return pci_register_driver(&sil24_pci_driver);
1424 }
1425
1426 static void __exit sil24_exit(void)
1427 {
1428         pci_unregister_driver(&sil24_pci_driver);
1429 }
1430
1431 MODULE_AUTHOR("Tejun Heo");
1432 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1433 MODULE_LICENSE("GPL");
1434 MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1435
1436 module_init(sil24_init);
1437 module_exit(sil24_exit);