SAFE public projects git trees. - safe/jmp/linux-2.6/blob - arch/mips/sibyte/sb1250/irq.c

   1 /*
   2  * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  17  */
  18 #include <linux/kernel.h>
  19 #include <linux/init.h>
  20 #include <linux/linkage.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/spinlock.h>
  23 #include <linux/smp.h>
  24 #include <linux/mm.h>
  25 #include <linux/slab.h>
  26 #include <linux/kernel_stat.h>
  27
  28 #include <asm/errno.h>
  29 #include <asm/signal.h>
  30 #include <asm/system.h>
  31 #include <asm/time.h>
  32 #include <asm/io.h>
  33
  34 #include <asm/sibyte/sb1250_regs.h>
  35 #include <asm/sibyte/sb1250_int.h>
  36 #include <asm/sibyte/sb1250_uart.h>
  37 #include <asm/sibyte/sb1250_scd.h>
  38 #include <asm/sibyte/sb1250.h>
  39
  40 /*
  41  * These are the routines that handle all the low level interrupt stuff.
  42  * Actions handled here are: initialization of the interrupt map, requesting of
  43  * interrupt lines by handlers, dispatching if interrupts to handlers, probing
  44  * for interrupt lines
  45  */
  46
  47
  48 static void end_sb1250_irq(unsigned int irq);
  49 static void enable_sb1250_irq(unsigned int irq);
  50 static void disable_sb1250_irq(unsigned int irq);
  51 static void ack_sb1250_irq(unsigned int irq);
  52 #ifdef CONFIG_SMP
  53 static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
  54 #endif
  55
  56 #ifdef CONFIG_SIBYTE_HAS_LDT
  57 extern unsigned long ldt_eoi_space;
  58 #endif
  59
  60 static struct irq_chip sb1250_irq_type = {
  61         .name = "SB1250-IMR",
  62         .ack = ack_sb1250_irq,
  63         .mask = disable_sb1250_irq,
  64         .mask_ack = ack_sb1250_irq,
  65         .unmask = enable_sb1250_irq,
  66         .end = end_sb1250_irq,
  67 #ifdef CONFIG_SMP
  68         .set_affinity = sb1250_set_affinity
  69 #endif
  70 };
  71
  72 /* Store the CPU id (not the logical number) */
  73 int sb1250_irq_owner[SB1250_NR_IRQS];
  74
  75 DEFINE_SPINLOCK(sb1250_imr_lock);
  76
  77 void sb1250_mask_irq(int cpu, int irq)
  78 {
  79         unsigned long flags;
  80         u64 cur_ints;
  81
  82         spin_lock_irqsave(&sb1250_imr_lock, flags);
  83         cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
  84                                         R_IMR_INTERRUPT_MASK));
  85         cur_ints |= (((u64) 1) << irq);
  86         ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
  87                                         R_IMR_INTERRUPT_MASK));
  88         spin_unlock_irqrestore(&sb1250_imr_lock, flags);
  89 }
  90
  91 void sb1250_unmask_irq(int cpu, int irq)
  92 {
  93         unsigned long flags;
  94         u64 cur_ints;
  95
  96         spin_lock_irqsave(&sb1250_imr_lock, flags);
  97         cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
  98                                         R_IMR_INTERRUPT_MASK));
  99         cur_ints &= ~(((u64) 1) << irq);
 100         ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 101                                         R_IMR_INTERRUPT_MASK));
 102         spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 103 }
 104
 105 #ifdef CONFIG_SMP
 106 static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 107 {
 108         int i = 0, old_cpu, cpu, int_on;
 109         u64 cur_ints;
 110         unsigned long flags;
 111
 112         i = cpumask_first(mask);
 113
 114         if (cpumask_weight(mask) > 1) {
 115                 printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
 116                 return -1;
 117         }
 118
 119         /* Convert logical CPU to physical CPU */
 120         cpu = cpu_logical_map(i);
 121
 122         /* Protect against other affinity changers and IMR manipulation */
 123         spin_lock_irqsave(&sb1250_imr_lock, flags);
 124
 125         /* Swizzle each CPU's IMR (but leave the IP selection alone) */
 126         old_cpu = sb1250_irq_owner[irq];
 127         cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
 128                                         R_IMR_INTERRUPT_MASK));
 129         int_on = !(cur_ints & (((u64) 1) << irq));
 130         if (int_on) {
 131                 /* If it was on, mask it */
 132                 cur_ints |= (((u64) 1) << irq);
 133                 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
 134                                         R_IMR_INTERRUPT_MASK));
 135         }
 136         sb1250_irq_owner[irq] = cpu;
 137         if (int_on) {
 138                 /* unmask for the new CPU */
 139                 cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
 140                                         R_IMR_INTERRUPT_MASK));
 141                 cur_ints &= ~(((u64) 1) << irq);
 142                 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 143                                         R_IMR_INTERRUPT_MASK));
 144         }
 145         spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 146
 147         return 0;
 148 }
 149 #endif
 150
 151 /*****************************************************************************/
 152
 153 static void disable_sb1250_irq(unsigned int irq)
 154 {
 155         sb1250_mask_irq(sb1250_irq_owner[irq], irq);
 156 }
 157
 158 static void enable_sb1250_irq(unsigned int irq)
 159 {
 160         sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
 161 }
 162
 163
 164 static void ack_sb1250_irq(unsigned int irq)
 165 {
 166 #ifdef CONFIG_SIBYTE_HAS_LDT
 167         u64 pending;
 168
 169         /*
 170          * If the interrupt was an HT interrupt, now is the time to
 171          * clear it.  NOTE: we assume the HT bridge was set up to
 172          * deliver the interrupts to all CPUs (which makes affinity
 173          * changing easier for us)
 174          */
 175         pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
 176                                                     R_IMR_LDT_INTERRUPT)));
 177         pending &= ((u64)1 << (irq));
 178         if (pending) {
 179                 int i;
 180                 for (i=0; i<NR_CPUS; i++) {
 181                         int cpu;
 182 #ifdef CONFIG_SMP
 183                         cpu = cpu_logical_map(i);
 184 #else
 185                         cpu = i;
 186 #endif
 187                         /*
 188                          * Clear for all CPUs so an affinity switch
 189                          * doesn't find an old status
 190                          */
 191                         __raw_writeq(pending,
 192                                      IOADDR(A_IMR_REGISTER(cpu,
 193                                                 R_IMR_LDT_INTERRUPT_CLR)));
 194                 }
 195
 196                 /*
 197                  * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
 198                  * Pass 2, the LDT world may be edge-triggered, but
 199                  * this EOI shouldn't hurt.  If they are
 200                  * level-sensitive, the EOI is required.
 201                  */
 202                 *(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
 203         }
 204 #endif
 205         sb1250_mask_irq(sb1250_irq_owner[irq], irq);
 206 }
 207
 208
 209 static void end_sb1250_irq(unsigned int irq)
 210 {
 211         if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
 212                 sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
 213         }
 214 }
 215
 216
 217 void __init init_sb1250_irqs(void)
 218 {
 219         int i;
 220
 221         for (i = 0; i < SB1250_NR_IRQS; i++) {
 222                 set_irq_chip_and_handler(i, &sb1250_irq_type, handle_level_irq);
 223                 sb1250_irq_owner[i] = 0;
 224         }
 225 }
 226
 227
 228 /*
 229  *  arch_init_irq is called early in the boot sequence from init/main.c via
 230  *  init_IRQ.  It is responsible for setting up the interrupt mapper and
 231  *  installing the handler that will be responsible for dispatching interrupts
 232  *  to the "right" place.
 233  */
 234 /*
 235  * For now, map all interrupts to IP[2].  We could save
 236  * some cycles by parceling out system interrupts to different
 237  * IP lines, but keep it simple for bringup.  We'll also direct
 238  * all interrupts to a single CPU; we should probably route
 239  * PCI and LDT to one cpu and everything else to the other
 240  * to balance the load a bit.
 241  *
 242  * On the second cpu, everything is set to IP5, which is
 243  * ignored, EXCEPT the mailbox interrupt.  That one is
 244  * set to IP[2] so it is handled.  This is needed so we
 245  * can do cross-cpu function calls, as requred by SMP
 246  */
 247
 248 #define IMR_IP2_VAL     K_INT_MAP_I0
 249 #define IMR_IP3_VAL     K_INT_MAP_I1
 250 #define IMR_IP4_VAL     K_INT_MAP_I2
 251 #define IMR_IP5_VAL     K_INT_MAP_I3
 252 #define IMR_IP6_VAL     K_INT_MAP_I4
 253
 254 void __init arch_init_irq(void)
 255 {
 256
 257         unsigned int i;
 258         u64 tmp;
 259         unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
 260                 STATUSF_IP1 | STATUSF_IP0;
 261
 262         /* Default everything to IP2 */
 263         for (i = 0; i < SB1250_NR_IRQS; i++) {  /* was I0 */
 264                 __raw_writeq(IMR_IP2_VAL,
 265                              IOADDR(A_IMR_REGISTER(0,
 266                                                    R_IMR_INTERRUPT_MAP_BASE) +
 267                                     (i << 3)));
 268                 __raw_writeq(IMR_IP2_VAL,
 269                              IOADDR(A_IMR_REGISTER(1,
 270                                                    R_IMR_INTERRUPT_MAP_BASE) +
 271                                     (i << 3)));
 272         }
 273
 274         init_sb1250_irqs();
 275
 276         /*
 277          * Map the high 16 bits of the mailbox registers to IP[3], for
 278          * inter-cpu messages
 279          */
 280         /* Was I1 */
 281         __raw_writeq(IMR_IP3_VAL,
 282                      IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
 283                             (K_INT_MBOX_0 << 3)));
 284         __raw_writeq(IMR_IP3_VAL,
 285                      IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
 286                             (K_INT_MBOX_0 << 3)));
 287
 288         /* Clear the mailboxes.  The firmware may leave them dirty */
 289         __raw_writeq(0xffffffffffffffffULL,
 290                      IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
 291         __raw_writeq(0xffffffffffffffffULL,
 292                      IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
 293
 294         /* Mask everything except the mailbox registers for both cpus */
 295         tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
 296         __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
 297         __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
 298
 299         /*
 300          * Note that the timer interrupts are also mapped, but this is
 301          * done in sb1250_time_init().  Also, the profiling driver
 302          * does its own management of IP7.
 303          */
 304
 305         /* Enable necessary IPs, disable the rest */
 306         change_c0_status(ST0_IM, imask);
 307 }
 308
 309 extern void sb1250_mailbox_interrupt(void);
 310
 311 static inline void dispatch_ip2(void)
 312 {
 313         unsigned int cpu = smp_processor_id();
 314         unsigned long long mask;
 315
 316         /*
 317          * Default...we've hit an IP[2] interrupt, which means we've got to
 318          * check the 1250 interrupt registers to figure out what to do.  Need
 319          * to detect which CPU we're on, now that smp_affinity is supported.
 320          */
 321         mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
 322                                   R_IMR_INTERRUPT_STATUS_BASE)));
 323         if (mask)
 324                 do_IRQ(fls64(mask) - 1);
 325 }
 326
 327 asmlinkage void plat_irq_dispatch(void)
 328 {
 329         unsigned int cpu = smp_processor_id();
 330         unsigned int pending;
 331
 332         /*
 333          * What a pain. We have to be really careful saving the upper 32 bits
 334          * of any * register across function calls if we don't want them
 335          * trashed--since were running in -o32, the calling routing never saves
 336          * the full 64 bits of a register across a function call.  Being the
 337          * interrupt handler, we're guaranteed that interrupts are disabled
 338          * during this code so we don't have to worry about random interrupts
 339          * blasting the high 32 bits.
 340          */
 341
 342         pending = read_c0_cause() & read_c0_status() & ST0_IM;
 343
 344         if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
 345                 do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 346         else if (pending & CAUSEF_IP4)
 347                 do_IRQ(K_INT_TIMER_0 + cpu);    /* sb1250_timer_interrupt() */
 348
 349 #ifdef CONFIG_SMP
 350         else if (pending & CAUSEF_IP3)
 351                 sb1250_mailbox_interrupt();
 352 #endif
 353
 354         else if (pending & CAUSEF_IP2)
 355                 dispatch_ip2();
 356         else
 357                 spurious_interrupt();
 358 }