Linux-2.6.12-rc2
[safe/jmp/linux-2.6] / arch / mips / pci / ops-it8172.c
1 /*
2  *
3  * BRIEF MODULE DESCRIPTION
4  *      IT8172 system controller specific pci support.
5  *
6  * Copyright 2000 MontaVista Software Inc.
7  * Author: MontaVista Software, Inc.
8  *              ppopov@mvista.com or source@mvista.com
9  *
10  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
11  *
12  *  This program is free software; you can redistribute  it and/or modify it
13  *  under  the terms of  the GNU General  Public License as published by the
14  *  Free Software Foundation;  either version 2 of the  License, or (at your
15  *  option) any later version.
16  *
17  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
18  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
19  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
20  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
21  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
23  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
24  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
25  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  *
28  *  You should have received a copy of the  GNU General Public License along
29  *  with this program; if not, write  to the Free Software Foundation, Inc.,
30  *  675 Mass Ave, Cambridge, MA 02139, USA.
31  */
32 #include <linux/types.h>
33 #include <linux/pci.h>
34 #include <linux/kernel.h>
35 #include <linux/init.h>
36
37 #include <asm/it8172/it8172.h>
38 #include <asm/it8172/it8172_pci.h>
39
40 #define PCI_ACCESS_READ  0
41 #define PCI_ACCESS_WRITE 1
42
43 #undef DEBUG
44 #ifdef DEBUG
45 #define DBG(x...) printk(x)
46 #else
47 #define DBG(x...)
48 #endif
49
50 static struct resource pci_mem_resource_1;
51
52 static struct resource pci_io_resource = {
53         "io pci IO space",
54         0x14018000,
55         0x17FFFFFF,
56         IORESOURCE_IO
57 };
58
59 static struct resource pci_mem_resource_0 = {
60         "ext pci memory space 0/1",
61         0x10101000,
62         0x13FFFFFF,
63         IORESOURCE_MEM,
64         &pci_mem_resource_0,
65         NULL,
66         &pci_mem_resource_1
67 };
68
69 static struct resource pci_mem_resource_1 = {
70         "ext pci memory space 2/3",
71         0x1A000000,
72         0x1FBFFFFF,
73         IORESOURCE_MEM,
74         &pci_mem_resource_0,
75         NULL,
76         NULL
77 };
78
79 extern struct pci_ops it8172_pci_ops;
80
81 struct pci_controller it8172_controller = {
82         .pci_ops        = &it8172_pci_ops,
83         .io_resource    = &pci_io_resource,
84         .mem_resource   = &pci_mem_resource_0,
85 };
86
87 static int it8172_pcibios_config_access(unsigned char access_type,
88                                         struct pci_bus *bus,
89                                         unsigned int devfn, int where,
90                                         u32 * data)
91 {
92         /*
93          * config cycles are on 4 byte boundary only
94          */
95
96         /* Setup address */
97         IT_WRITE(IT_CONFADDR, (bus->number << IT_BUSNUM_SHF) |
98                  (devfn << IT_FUNCNUM_SHF) | (where & ~0x3));
99
100         if (access_type == PCI_ACCESS_WRITE) {
101                 IT_WRITE(IT_CONFDATA, *data);
102         } else {
103                 IT_READ(IT_CONFDATA, *data);
104         }
105
106         /*
107          * Revisit: check for master or target abort.
108          */
109         return 0;
110 }
111
112
113 /*
114  * We can't address 8 and 16 bit words directly.  Instead we have to
115  * read/write a 32bit word and mask/modify the data we actually want.
116  */
117 static write_config(struct pci_bus *bus, unsigned int devfn, int where,
118                     int size, u32 val)
119 {
120         u32 data = 0;
121
122         switch (size) {
123         case 1:
124                 if (it8172_pcibios_config_access
125                     (PCI_ACCESS_READ, dev, where, &data))
126                         return -1;
127
128                 *val = (data >> ((where & 3) << 3)) & 0xff;
129
130                 return PCIBIOS_SUCCESSFUL;
131
132         case 2:
133
134                 if (where & 1)
135                         return PCIBIOS_BAD_REGISTER_NUMBER;
136
137                 if (it8172_pcibios_config_access
138                     (PCI_ACCESS_READ, dev, where, &data))
139                         return -1;
140
141                 *val = (data >> ((where & 3) << 3)) & 0xffff;
142                 DBG("cfg read word: bus %d dev_fn %x where %x: val %x\n",
143                     dev->bus->number, dev->devfn, where, *val);
144
145                 return PCIBIOS_SUCCESSFUL;
146
147         case 4:
148
149                 if (where & 3)
150                         return PCIBIOS_BAD_REGISTER_NUMBER;
151
152                 if (it8172_pcibios_config_access
153                     (PCI_ACCESS_READ, dev, where, &data))
154                         return -1;
155
156                 *val = data;
157
158                 return PCIBIOS_SUCCESSFUL;
159         }
160 }
161
162
163 static write_config(struct pci_bus *bus, unsigned int devfn, int where,
164                     int size, u32 val)
165 {
166         u32 data = 0;
167
168         switch (size) {
169         case 1:
170                 if (it8172_pcibios_config_access
171                     (PCI_ACCESS_READ, dev, where, &data))
172                         return -1;
173
174                 data = (data & ~(0xff << ((where & 3) << 3))) |
175                     (val << ((where & 3) << 3));
176
177                 if (it8172_pcibios_config_access
178                     (PCI_ACCESS_WRITE, dev, where, &data))
179                         return -1;
180
181                 return PCIBIOS_SUCCESSFUL;
182
183         case 2:
184                 if (where & 1)
185                         return PCIBIOS_BAD_REGISTER_NUMBER;
186
187                 if (it8172_pcibios_config_access
188                     (PCI_ACCESS_READ, dev, where, &data))
189                         eturn - 1;
190
191                 data = (data & ~(0xffff << ((where & 3) << 3))) |
192                     (val << ((where & 3) << 3));
193
194                 if (it8172_pcibios_config_access
195                     (PCI_ACCESS_WRITE, dev, where, &data))
196                         return -1;
197
198                 return PCIBIOS_SUCCESSFUL;
199
200         case 4:
201                 if (where & 3)
202                         return PCIBIOS_BAD_REGISTER_NUMBER;
203
204                 if (it8172_pcibios_config_access
205                     (PCI_ACCESS_WRITE, dev, where, &val))
206                         return -1;
207
208                 return PCIBIOS_SUCCESSFUL;
209         }
210 }
211
212 struct pci_ops it8172_pci_ops = {
213         .read = read_config,
214         .write = write_config,
215 };