PTRACE_PEEKDATA consolidation
[safe/jmp/linux-2.6] / arch / mips / kernel / ptrace.c
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 1992 Ross Biro
7  * Copyright (C) Linus Torvalds
8  * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
9  * Copyright (C) 1996 David S. Miller
10  * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
11  * Copyright (C) 1999 MIPS Technologies, Inc.
12  * Copyright (C) 2000 Ulf Carlsson
13  *
14  * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit
15  * binaries.
16  */
17 #include <linux/compiler.h>
18 #include <linux/kernel.h>
19 #include <linux/sched.h>
20 #include <linux/mm.h>
21 #include <linux/errno.h>
22 #include <linux/ptrace.h>
23 #include <linux/audit.h>
24 #include <linux/smp.h>
25 #include <linux/user.h>
26 #include <linux/security.h>
27 #include <linux/signal.h>
28
29 #include <asm/byteorder.h>
30 #include <asm/cpu.h>
31 #include <asm/dsp.h>
32 #include <asm/fpu.h>
33 #include <asm/mipsregs.h>
34 #include <asm/mipsmtregs.h>
35 #include <asm/pgtable.h>
36 #include <asm/page.h>
37 #include <asm/system.h>
38 #include <asm/uaccess.h>
39 #include <asm/bootinfo.h>
40 #include <asm/reg.h>
41
42 /*
43  * Called by kernel/ptrace.c when detaching..
44  *
45  * Make sure single step bits etc are not set.
46  */
47 void ptrace_disable(struct task_struct *child)
48 {
49         /* Nothing to do.. */
50 }
51
52 /*
53  * Read a general register set.  We always use the 64-bit format, even
54  * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
55  * Registers are sign extended to fill the available space.
56  */
57 int ptrace_getregs (struct task_struct *child, __s64 __user *data)
58 {
59         struct pt_regs *regs;
60         int i;
61
62         if (!access_ok(VERIFY_WRITE, data, 38 * 8))
63                 return -EIO;
64
65         regs = task_pt_regs(child);
66
67         for (i = 0; i < 32; i++)
68                 __put_user (regs->regs[i], data + i);
69         __put_user (regs->lo, data + EF_LO - EF_R0);
70         __put_user (regs->hi, data + EF_HI - EF_R0);
71         __put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
72         __put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
73         __put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
74         __put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
75
76         return 0;
77 }
78
79 /*
80  * Write a general register set.  As for PTRACE_GETREGS, we always use
81  * the 64-bit format.  On a 32-bit kernel only the lower order half
82  * (according to endianness) will be used.
83  */
84 int ptrace_setregs (struct task_struct *child, __s64 __user *data)
85 {
86         struct pt_regs *regs;
87         int i;
88
89         if (!access_ok(VERIFY_READ, data, 38 * 8))
90                 return -EIO;
91
92         regs = task_pt_regs(child);
93
94         for (i = 0; i < 32; i++)
95                 __get_user (regs->regs[i], data + i);
96         __get_user (regs->lo, data + EF_LO - EF_R0);
97         __get_user (regs->hi, data + EF_HI - EF_R0);
98         __get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
99
100         /* badvaddr, status, and cause may not be written.  */
101
102         return 0;
103 }
104
105 int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
106 {
107         int i;
108         unsigned int tmp;
109
110         if (!access_ok(VERIFY_WRITE, data, 33 * 8))
111                 return -EIO;
112
113         if (tsk_used_math(child)) {
114                 fpureg_t *fregs = get_fpu_regs(child);
115                 for (i = 0; i < 32; i++)
116                         __put_user (fregs[i], i + (__u64 __user *) data);
117         } else {
118                 for (i = 0; i < 32; i++)
119                         __put_user ((__u64) -1, i + (__u64 __user *) data);
120         }
121
122         __put_user (child->thread.fpu.fcr31, data + 64);
123
124         preempt_disable();
125         if (cpu_has_fpu) {
126                 unsigned int flags;
127
128                 if (cpu_has_mipsmt) {
129                         unsigned int vpflags = dvpe();
130                         flags = read_c0_status();
131                         __enable_fpu();
132                         __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
133                         write_c0_status(flags);
134                         evpe(vpflags);
135                 } else {
136                         flags = read_c0_status();
137                         __enable_fpu();
138                         __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
139                         write_c0_status(flags);
140                 }
141         } else {
142                 tmp = 0;
143         }
144         preempt_enable();
145         __put_user (tmp, data + 65);
146
147         return 0;
148 }
149
150 int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
151 {
152         fpureg_t *fregs;
153         int i;
154
155         if (!access_ok(VERIFY_READ, data, 33 * 8))
156                 return -EIO;
157
158         fregs = get_fpu_regs(child);
159
160         for (i = 0; i < 32; i++)
161                 __get_user (fregs[i], i + (__u64 __user *) data);
162
163         __get_user (child->thread.fpu.fcr31, data + 64);
164
165         /* FIR may not be written.  */
166
167         return 0;
168 }
169
170 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
171 {
172         int ret;
173
174         switch (request) {
175         /* when I and D space are separate, these will need to be fixed. */
176         case PTRACE_PEEKTEXT: /* read word at location addr. */
177         case PTRACE_PEEKDATA:
178                 ret = generic_ptrace_peekdata(child, addr, data);
179                 break;
180
181         /* Read the word at location addr in the USER area. */
182         case PTRACE_PEEKUSR: {
183                 struct pt_regs *regs;
184                 unsigned long tmp = 0;
185
186                 regs = task_pt_regs(child);
187                 ret = 0;  /* Default return value. */
188
189                 switch (addr) {
190                 case 0 ... 31:
191                         tmp = regs->regs[addr];
192                         break;
193                 case FPR_BASE ... FPR_BASE + 31:
194                         if (tsk_used_math(child)) {
195                                 fpureg_t *fregs = get_fpu_regs(child);
196
197 #ifdef CONFIG_32BIT
198                                 /*
199                                  * The odd registers are actually the high
200                                  * order bits of the values stored in the even
201                                  * registers - unless we're using r2k_switch.S.
202                                  */
203                                 if (addr & 1)
204                                         tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32);
205                                 else
206                                         tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff);
207 #endif
208 #ifdef CONFIG_64BIT
209                                 tmp = fregs[addr - FPR_BASE];
210 #endif
211                         } else {
212                                 tmp = -1;       /* FP not yet used  */
213                         }
214                         break;
215                 case PC:
216                         tmp = regs->cp0_epc;
217                         break;
218                 case CAUSE:
219                         tmp = regs->cp0_cause;
220                         break;
221                 case BADVADDR:
222                         tmp = regs->cp0_badvaddr;
223                         break;
224                 case MMHI:
225                         tmp = regs->hi;
226                         break;
227                 case MMLO:
228                         tmp = regs->lo;
229                         break;
230 #ifdef CONFIG_CPU_HAS_SMARTMIPS
231                 case ACX:
232                         tmp = regs->acx;
233                         break;
234 #endif
235                 case FPC_CSR:
236                         tmp = child->thread.fpu.fcr31;
237                         break;
238                 case FPC_EIR: { /* implementation / version register */
239                         unsigned int flags;
240 #ifdef CONFIG_MIPS_MT_SMTC
241                         unsigned int irqflags;
242                         unsigned int mtflags;
243 #endif /* CONFIG_MIPS_MT_SMTC */
244
245                         preempt_disable();
246                         if (!cpu_has_fpu) {
247                                 preempt_enable();
248                                 break;
249                         }
250
251 #ifdef CONFIG_MIPS_MT_SMTC
252                         /* Read-modify-write of Status must be atomic */
253                         local_irq_save(irqflags);
254                         mtflags = dmt();
255 #endif /* CONFIG_MIPS_MT_SMTC */
256                         if (cpu_has_mipsmt) {
257                                 unsigned int vpflags = dvpe();
258                                 flags = read_c0_status();
259                                 __enable_fpu();
260                                 __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
261                                 write_c0_status(flags);
262                                 evpe(vpflags);
263                         } else {
264                                 flags = read_c0_status();
265                                 __enable_fpu();
266                                 __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
267                                 write_c0_status(flags);
268                         }
269 #ifdef CONFIG_MIPS_MT_SMTC
270                         emt(mtflags);
271                         local_irq_restore(irqflags);
272 #endif /* CONFIG_MIPS_MT_SMTC */
273                         preempt_enable();
274                         break;
275                 }
276                 case DSP_BASE ... DSP_BASE + 5: {
277                         dspreg_t *dregs;
278
279                         if (!cpu_has_dsp) {
280                                 tmp = 0;
281                                 ret = -EIO;
282                                 goto out;
283                         }
284                         dregs = __get_dsp_regs(child);
285                         tmp = (unsigned long) (dregs[addr - DSP_BASE]);
286                         break;
287                 }
288                 case DSP_CONTROL:
289                         if (!cpu_has_dsp) {
290                                 tmp = 0;
291                                 ret = -EIO;
292                                 goto out;
293                         }
294                         tmp = child->thread.dsp.dspcontrol;
295                         break;
296                 default:
297                         tmp = 0;
298                         ret = -EIO;
299                         goto out;
300                 }
301                 ret = put_user(tmp, (unsigned long __user *) data);
302                 break;
303         }
304
305         /* when I and D space are separate, this will have to be fixed. */
306         case PTRACE_POKETEXT: /* write the word at location addr. */
307         case PTRACE_POKEDATA:
308                 ret = 0;
309                 if (access_process_vm(child, addr, &data, sizeof(data), 1)
310                     == sizeof(data))
311                         break;
312                 ret = -EIO;
313                 break;
314
315         case PTRACE_POKEUSR: {
316                 struct pt_regs *regs;
317                 ret = 0;
318                 regs = task_pt_regs(child);
319
320                 switch (addr) {
321                 case 0 ... 31:
322                         regs->regs[addr] = data;
323                         break;
324                 case FPR_BASE ... FPR_BASE + 31: {
325                         fpureg_t *fregs = get_fpu_regs(child);
326
327                         if (!tsk_used_math(child)) {
328                                 /* FP not yet used  */
329                                 memset(&child->thread.fpu, ~0,
330                                        sizeof(child->thread.fpu));
331                                 child->thread.fpu.fcr31 = 0;
332                         }
333 #ifdef CONFIG_32BIT
334                         /*
335                          * The odd registers are actually the high order bits
336                          * of the values stored in the even registers - unless
337                          * we're using r2k_switch.S.
338                          */
339                         if (addr & 1) {
340                                 fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff;
341                                 fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32;
342                         } else {
343                                 fregs[addr - FPR_BASE] &= ~0xffffffffLL;
344                                 fregs[addr - FPR_BASE] |= data;
345                         }
346 #endif
347 #ifdef CONFIG_64BIT
348                         fregs[addr - FPR_BASE] = data;
349 #endif
350                         break;
351                 }
352                 case PC:
353                         regs->cp0_epc = data;
354                         break;
355                 case MMHI:
356                         regs->hi = data;
357                         break;
358                 case MMLO:
359                         regs->lo = data;
360                         break;
361 #ifdef CONFIG_CPU_HAS_SMARTMIPS
362                 case ACX:
363                         regs->acx = data;
364                         break;
365 #endif
366                 case FPC_CSR:
367                         child->thread.fpu.fcr31 = data;
368                         break;
369                 case DSP_BASE ... DSP_BASE + 5: {
370                         dspreg_t *dregs;
371
372                         if (!cpu_has_dsp) {
373                                 ret = -EIO;
374                                 break;
375                         }
376
377                         dregs = __get_dsp_regs(child);
378                         dregs[addr - DSP_BASE] = data;
379                         break;
380                 }
381                 case DSP_CONTROL:
382                         if (!cpu_has_dsp) {
383                                 ret = -EIO;
384                                 break;
385                         }
386                         child->thread.dsp.dspcontrol = data;
387                         break;
388                 default:
389                         /* The rest are not allowed. */
390                         ret = -EIO;
391                         break;
392                 }
393                 break;
394                 }
395
396         case PTRACE_GETREGS:
397                 ret = ptrace_getregs (child, (__u64 __user *) data);
398                 break;
399
400         case PTRACE_SETREGS:
401                 ret = ptrace_setregs (child, (__u64 __user *) data);
402                 break;
403
404         case PTRACE_GETFPREGS:
405                 ret = ptrace_getfpregs (child, (__u32 __user *) data);
406                 break;
407
408         case PTRACE_SETFPREGS:
409                 ret = ptrace_setfpregs (child, (__u32 __user *) data);
410                 break;
411
412         case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
413         case PTRACE_CONT: { /* restart after signal. */
414                 ret = -EIO;
415                 if (!valid_signal(data))
416                         break;
417                 if (request == PTRACE_SYSCALL) {
418                         set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
419                 }
420                 else {
421                         clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
422                 }
423                 child->exit_code = data;
424                 wake_up_process(child);
425                 ret = 0;
426                 break;
427         }
428
429         /*
430          * make the child exit.  Best I can do is send it a sigkill.
431          * perhaps it should be put in the status that it wants to
432          * exit.
433          */
434         case PTRACE_KILL:
435                 ret = 0;
436                 if (child->exit_state == EXIT_ZOMBIE)   /* already dead */
437                         break;
438                 child->exit_code = SIGKILL;
439                 wake_up_process(child);
440                 break;
441
442         case PTRACE_DETACH: /* detach a process that was attached. */
443                 ret = ptrace_detach(child, data);
444                 break;
445
446         case PTRACE_GET_THREAD_AREA:
447                 ret = put_user(task_thread_info(child)->tp_value,
448                                 (unsigned long __user *) data);
449                 break;
450
451         default:
452                 ret = ptrace_request(child, request, addr, data);
453                 break;
454         }
455  out:
456         return ret;
457 }
458
459 static inline int audit_arch(void)
460 {
461         int arch = EM_MIPS;
462 #ifdef CONFIG_64BIT
463         arch |=  __AUDIT_ARCH_64BIT;
464 #endif
465 #if defined(__LITTLE_ENDIAN)
466         arch |=  __AUDIT_ARCH_LE;
467 #endif
468         return arch;
469 }
470
471 /*
472  * Notification of system call entry/exit
473  * - triggered by current->work.syscall_trace
474  */
475 asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
476 {
477         if (unlikely(current->audit_context) && entryexit)
478                 audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
479                                    regs->regs[2]);
480
481         if (!(current->ptrace & PT_PTRACED))
482                 goto out;
483         if (!test_thread_flag(TIF_SYSCALL_TRACE))
484                 goto out;
485
486         /* The 0x80 provides a way for the tracing parent to distinguish
487            between a syscall stop and SIGTRAP delivery */
488         ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
489                                  0x80 : 0));
490
491         /*
492          * this isn't the same as continuing with a signal, but it will do
493          * for normal use.  strace only continues with a signal if the
494          * stopping signal is not SIGTRAP.  -brl
495          */
496         if (current->exit_code) {
497                 send_sig(current->exit_code, current, 1);
498                 current->exit_code = 0;
499         }
500  out:
501         if (unlikely(current->audit_context) && !entryexit)
502                 audit_syscall_entry(audit_arch(), regs->regs[2],
503                                     regs->regs[4], regs->regs[5],
504                                     regs->regs[6], regs->regs[7]);
505 }