a5df672d83923a14479e1b94b9583354e2b14661
[safe/jmp/linux-2.6] / arch / ia64 / sn / kernel / xpnet.c
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
7  */
8
9
10 /*
11  * Cross Partition Network Interface (XPNET) support
12  *
13  *      XPNET provides a virtual network layered on top of the Cross
14  *      Partition communication layer.
15  *
16  *      XPNET provides direct point-to-point and broadcast-like support
17  *      for an ethernet-like device.  The ethernet broadcast medium is
18  *      replaced with a point-to-point message structure which passes
19  *      pointers to a DMA-capable block that a remote partition should
20  *      retrieve and pass to the upper level networking layer.
21  *
22  */
23
24
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/ioport.h>
29 #include <linux/netdevice.h>
30 #include <linux/etherdevice.h>
31 #include <linux/delay.h>
32 #include <linux/ethtool.h>
33 #include <linux/mii.h>
34 #include <linux/smp.h>
35 #include <linux/string.h>
36 #include <asm/sn/bte.h>
37 #include <asm/sn/io.h>
38 #include <asm/sn/sn_sal.h>
39 #include <asm/types.h>
40 #include <asm/atomic.h>
41 #include <asm/sn/xp.h>
42
43
44 /*
45  * The message payload transferred by XPC.
46  *
47  * buf_pa is the physical address where the DMA should pull from.
48  *
49  * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
50  * cacheline boundary.  To accomplish this, we record the number of
51  * bytes from the beginning of the first cacheline to the first useful
52  * byte of the skb (leadin_ignore) and the number of bytes from the
53  * last useful byte of the skb to the end of the last cacheline
54  * (tailout_ignore).
55  *
56  * size is the number of bytes to transfer which includes the skb->len
57  * (useful bytes of the senders skb) plus the leadin and tailout
58  */
59 struct xpnet_message {
60         u16 version;            /* Version for this message */
61         u16 embedded_bytes;     /* #of bytes embedded in XPC message */
62         u32 magic;              /* Special number indicating this is xpnet */
63         u64 buf_pa;             /* phys address of buffer to retrieve */
64         u32 size;               /* #of bytes in buffer */
65         u8 leadin_ignore;       /* #of bytes to ignore at the beginning */
66         u8 tailout_ignore;      /* #of bytes to ignore at the end */
67         unsigned char data;     /* body of small packets */
68 };
69
70 /*
71  * Determine the size of our message, the cacheline aligned size,
72  * and then the number of message will request from XPC.
73  *
74  * XPC expects each message to exist in an individual cacheline.
75  */
76 #define XPNET_MSG_SIZE          (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
77 #define XPNET_MSG_DATA_MAX      \
78                 (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
79 #define XPNET_MSG_ALIGNED_SIZE  (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
80 #define XPNET_MSG_NENTRIES      (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
81
82
83 #define XPNET_MAX_KTHREADS      (XPNET_MSG_NENTRIES + 1)
84 #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
85
86 /*
87  * Version number of XPNET implementation. XPNET can always talk to versions
88  * with same major #, and never talk to versions with a different version.
89  */
90 #define _XPNET_VERSION(_major, _minor)  (((_major) << 4) | (_minor))
91 #define XPNET_VERSION_MAJOR(_v)         ((_v) >> 4)
92 #define XPNET_VERSION_MINOR(_v)         ((_v) & 0xf)
93
94 #define XPNET_VERSION _XPNET_VERSION(1,0)               /* version 1.0 */
95 #define XPNET_VERSION_EMBED _XPNET_VERSION(1,1)         /* version 1.1 */
96 #define XPNET_MAGIC     0x88786984 /* "XNET" */
97
98 #define XPNET_VALID_MSG(_m)                                                  \
99    ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
100     && (msg->magic == XPNET_MAGIC))
101
102 #define XPNET_DEVICE_NAME               "xp0"
103
104
105 /*
106  * When messages are queued with xpc_send_notify, a kmalloc'd buffer
107  * of the following type is passed as a notification cookie.  When the
108  * notification function is called, we use the cookie to decide
109  * whether all outstanding message sends have completed.  The skb can
110  * then be released.
111  */
112 struct xpnet_pending_msg {
113         struct list_head free_list;
114         struct sk_buff *skb;
115         atomic_t use_count;
116 };
117
118 /* driver specific structure pointed to by the device structure */
119 struct xpnet_dev_private {
120         struct net_device_stats stats;
121 };
122
123 struct net_device *xpnet_device;
124
125 /*
126  * When we are notified of other partitions activating, we add them to
127  * our bitmask of partitions to which we broadcast.
128  */
129 static u64 xpnet_broadcast_partitions;
130 /* protect above */
131 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
132
133 /*
134  * Since the Block Transfer Engine (BTE) is being used for the transfer
135  * and it relies upon cache-line size transfers, we need to reserve at
136  * least one cache-line for head and tail alignment.  The BTE is
137  * limited to 8MB transfers.
138  *
139  * Testing has shown that changing MTU to greater than 64KB has no effect
140  * on TCP as the two sides negotiate a Max Segment Size that is limited
141  * to 64K.  Other protocols May use packets greater than this, but for
142  * now, the default is 64KB.
143  */
144 #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
145 /* 32KB has been determined to be the ideal */
146 #define XPNET_DEF_MTU (0x8000UL)
147
148
149 /*
150  * The partition id is encapsulated in the MAC address.  The following
151  * define locates the octet the partid is in.
152  */
153 #define XPNET_PARTID_OCTET      1
154 #define XPNET_LICENSE_OCTET     2
155
156
157 /*
158  * Define the XPNET debug device structure that is to be used with dev_dbg(),
159  * dev_err(), dev_warn(), and dev_info().
160  */
161 struct device_driver xpnet_dbg_name = {
162         .name = "xpnet"
163 };
164
165 struct device xpnet_dbg_subname = {
166         .bus_id = {0},                  /* set to "" */
167         .driver = &xpnet_dbg_name
168 };
169
170 struct device *xpnet = &xpnet_dbg_subname;
171
172 /*
173  * Packet was recevied by XPC and forwarded to us.
174  */
175 static void
176 xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
177 {
178         struct sk_buff *skb;
179         bte_result_t bret;
180         struct xpnet_dev_private *priv =
181                 (struct xpnet_dev_private *) xpnet_device->priv;
182
183
184         if (!XPNET_VALID_MSG(msg)) {
185                 /*
186                  * Packet with a different XPC version.  Ignore.
187                  */
188                 xpc_received(partid, channel, (void *) msg);
189
190                 priv->stats.rx_errors++;
191
192                 return;
193         }
194         dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
195                 msg->leadin_ignore, msg->tailout_ignore);
196
197
198         /* reserve an extra cache line */
199         skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
200         if (!skb) {
201                 dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
202                         msg->size + L1_CACHE_BYTES);
203
204                 xpc_received(partid, channel, (void *) msg);
205
206                 priv->stats.rx_errors++;
207
208                 return;
209         }
210
211         /*
212          * The allocated skb has some reserved space.
213          * In order to use bte_copy, we need to get the
214          * skb->data pointer moved forward.
215          */
216         skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
217                                             (L1_CACHE_BYTES - 1)) +
218                           msg->leadin_ignore));
219
220         /*
221          * Update the tail pointer to indicate data actually
222          * transferred.
223          */
224         skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
225
226         /*
227          * Move the data over from the other side.
228          */
229         if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
230                                                 (msg->embedded_bytes != 0)) {
231                 dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
232                         "%lu)\n", skb->data, &msg->data,
233                         (size_t) msg->embedded_bytes);
234
235                 skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes);
236         } else {
237                 dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
238                         "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
239                         (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
240                         msg->size);
241
242                 bret = bte_copy(msg->buf_pa,
243                                 __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
244                                 msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
245
246                 if (bret != BTE_SUCCESS) {
247                         // >>> Need better way of cleaning skb.  Currently skb
248                         // >>> appears in_use and we can't just call
249                         // >>> dev_kfree_skb.
250                         dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
251                                 "error=0x%x\n", (void *)msg->buf_pa,
252                                 (void *)__pa((u64)skb->data &
253                                                         ~(L1_CACHE_BYTES - 1)),
254                                 msg->size, bret);
255
256                         xpc_received(partid, channel, (void *) msg);
257
258                         priv->stats.rx_errors++;
259
260                         return;
261                 }
262         }
263
264         dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
265                 "skb->end=0x%p skb->len=%d\n", (void *) skb->head,
266                 (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
267                 skb->len);
268
269         skb->protocol = eth_type_trans(skb, xpnet_device);
270         skb->ip_summed = CHECKSUM_UNNECESSARY;
271
272         dev_dbg(xpnet, "passing skb to network layer\n"
273                 KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
274                 "skb->end=0x%p skb->len=%d\n",
275                 (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
276                 skb_end_pointer(skb), skb->len);
277
278
279         xpnet_device->last_rx = jiffies;
280         priv->stats.rx_packets++;
281         priv->stats.rx_bytes += skb->len + ETH_HLEN;
282
283         netif_rx_ni(skb);
284         xpc_received(partid, channel, (void *) msg);
285 }
286
287
288 /*
289  * This is the handler which XPC calls during any sort of change in
290  * state or message reception on a connection.
291  */
292 static void
293 xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
294                           void *data, void *key)
295 {
296         long bp;
297
298
299         DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
300         DBUG_ON(channel != XPC_NET_CHANNEL);
301
302         switch(reason) {
303         case xpcMsgReceived:    /* message received */
304                 DBUG_ON(data == NULL);
305
306                 xpnet_receive(partid, channel, (struct xpnet_message *) data);
307                 break;
308
309         case xpcConnected:      /* connection completed to a partition */
310                 spin_lock_bh(&xpnet_broadcast_lock);
311                 xpnet_broadcast_partitions |= 1UL << (partid -1 );
312                 bp = xpnet_broadcast_partitions;
313                 spin_unlock_bh(&xpnet_broadcast_lock);
314
315                 netif_carrier_on(xpnet_device);
316
317                 dev_dbg(xpnet, "%s connection created to partition %d; "
318                         "xpnet_broadcast_partitions=0x%lx\n",
319                         xpnet_device->name, partid, bp);
320                 break;
321
322         default:
323                 spin_lock_bh(&xpnet_broadcast_lock);
324                 xpnet_broadcast_partitions &= ~(1UL << (partid -1 ));
325                 bp = xpnet_broadcast_partitions;
326                 spin_unlock_bh(&xpnet_broadcast_lock);
327
328                 if (bp == 0) {
329                         netif_carrier_off(xpnet_device);
330                 }
331
332                 dev_dbg(xpnet, "%s disconnected from partition %d; "
333                         "xpnet_broadcast_partitions=0x%lx\n",
334                         xpnet_device->name, partid, bp);
335                 break;
336
337         }
338 }
339
340
341 static int
342 xpnet_dev_open(struct net_device *dev)
343 {
344         enum xpc_retval ret;
345
346
347         dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
348                 "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
349                 XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
350                 XPNET_MAX_IDLE_KTHREADS);
351
352         ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
353                           XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
354                           XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
355         if (ret != xpcSuccess) {
356                 dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
357                         "ret=%d\n", dev->name, ret);
358
359                 return -ENOMEM;
360         }
361
362         dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);
363
364         return 0;
365 }
366
367
368 static int
369 xpnet_dev_stop(struct net_device *dev)
370 {
371         xpc_disconnect(XPC_NET_CHANNEL);
372
373         dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);
374
375         return 0;
376 }
377
378
379 static int
380 xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
381 {
382         /* 68 comes from min TCP+IP+MAC header */
383         if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
384                 dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
385                         "between 68 and %ld\n", dev->name, new_mtu,
386                         XPNET_MAX_MTU);
387                 return -EINVAL;
388         }
389
390         dev->mtu = new_mtu;
391         dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
392         return 0;
393 }
394
395
396 /*
397  * Required for the net_device structure.
398  */
399 static int
400 xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map)
401 {
402         return 0;
403 }
404
405
406 /*
407  * Return statistics to the caller.
408  */
409 static struct net_device_stats *
410 xpnet_dev_get_stats(struct net_device *dev)
411 {
412         struct xpnet_dev_private *priv;
413
414
415         priv = (struct xpnet_dev_private *) dev->priv;
416
417         return &priv->stats;
418 }
419
420
421 /*
422  * Notification that the other end has received the message and
423  * DMA'd the skb information.  At this point, they are done with
424  * our side.  When all recipients are done processing, we
425  * release the skb and then release our pending message structure.
426  */
427 static void
428 xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
429                         void *__qm)
430 {
431         struct xpnet_pending_msg *queued_msg =
432                 (struct xpnet_pending_msg *) __qm;
433
434
435         DBUG_ON(queued_msg == NULL);
436
437         dev_dbg(xpnet, "message to %d notified with reason %d\n",
438                 partid, reason);
439
440         if (atomic_dec_return(&queued_msg->use_count) == 0) {
441                 dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
442                         (void *) queued_msg->skb->head);
443
444                 dev_kfree_skb_any(queued_msg->skb);
445                 kfree(queued_msg);
446         }
447 }
448
449
450 /*
451  * Network layer has formatted a packet (skb) and is ready to place it
452  * "on the wire".  Prepare and send an xpnet_message to all partitions
453  * which have connected with us and are targets of this packet.
454  *
455  * MAC-NOTE:  For the XPNET driver, the MAC address contains the
456  * destination partition_id.  If the destination partition id word
457  * is 0xff, this packet is to broadcast to all partitions.
458  */
459 static int
460 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
461 {
462         struct xpnet_pending_msg *queued_msg;
463         enum xpc_retval ret;
464         struct xpnet_message *msg;
465         u64 start_addr, end_addr;
466         long dp;
467         u8 second_mac_octet;
468         partid_t dest_partid;
469         struct xpnet_dev_private *priv;
470         u16 embedded_bytes;
471
472
473         priv = (struct xpnet_dev_private *) dev->priv;
474
475
476         dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
477                 "skb->end=0x%p skb->len=%d\n", (void *) skb->head,
478                 (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
479                 skb->len);
480
481
482         /*
483          * The xpnet_pending_msg tracks how many outstanding
484          * xpc_send_notifies are relying on this skb.  When none
485          * remain, release the skb.
486          */
487         queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
488         if (queued_msg == NULL) {
489                 dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
490                         "packet\n", sizeof(struct xpnet_pending_msg));
491
492                 priv->stats.tx_errors++;
493
494                 return -ENOMEM;
495         }
496
497
498         /* get the beginning of the first cacheline and end of last */
499         start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
500         end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
501
502         /* calculate how many bytes to embed in the XPC message */
503         embedded_bytes = 0;
504         if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
505                 /* skb->data does fit so embed */
506                 embedded_bytes = skb->len;
507         }
508
509
510         /*
511          * Since the send occurs asynchronously, we set the count to one
512          * and begin sending.  Any sends that happen to complete before
513          * we are done sending will not free the skb.  We will be left
514          * with that task during exit.  This also handles the case of
515          * a packet destined for a partition which is no longer up.
516          */
517         atomic_set(&queued_msg->use_count, 1);
518         queued_msg->skb = skb;
519
520
521         second_mac_octet = skb->data[XPNET_PARTID_OCTET];
522         if (second_mac_octet == 0xff) {
523                 /* we are being asked to broadcast to all partitions */
524                 dp = xpnet_broadcast_partitions;
525         } else if (second_mac_octet != 0) {
526                 dp = xpnet_broadcast_partitions &
527                                         (1UL << (second_mac_octet - 1));
528         } else {
529                 /* 0 is an invalid partid.  Ignore */
530                 dp = 0;
531         }
532         dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
533
534         /*
535          * If we wanted to allow promiscuous mode to work like an
536          * unswitched network, this would be a good point to OR in a
537          * mask of partitions which should be receiving all packets.
538          */
539
540         /*
541          * Main send loop.
542          */
543         for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
544              dest_partid++) {
545
546
547                 if (!(dp & (1UL << (dest_partid - 1)))) {
548                         /* not destined for this partition */
549                         continue;
550                 }
551
552                 /* remove this partition from the destinations mask */
553                 dp &= ~(1UL << (dest_partid - 1));
554
555
556                 /* found a partition to send to */
557
558                 ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
559                                    XPC_NOWAIT, (void **)&msg);
560                 if (unlikely(ret != xpcSuccess)) {
561                         continue;
562                 }
563
564                 msg->embedded_bytes = embedded_bytes;
565                 if (unlikely(embedded_bytes != 0)) {
566                         msg->version = XPNET_VERSION_EMBED;
567                         dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
568                                 &msg->data, skb->data, (size_t) embedded_bytes);
569                         skb_copy_from_linear_data(skb, &msg->data,
570                                                   (size_t)embedded_bytes);
571                 } else {
572                         msg->version = XPNET_VERSION;
573                 }
574                 msg->magic = XPNET_MAGIC;
575                 msg->size = end_addr - start_addr;
576                 msg->leadin_ignore = (u64) skb->data - start_addr;
577                 msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
578                 msg->buf_pa = __pa(start_addr);
579
580                 dev_dbg(xpnet, "sending XPC message to %d:%d\n"
581                         KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
582                         "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
583                         dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
584                         msg->leadin_ignore, msg->tailout_ignore);
585
586
587                 atomic_inc(&queued_msg->use_count);
588
589                 ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
590                                       xpnet_send_completed, queued_msg);
591                 if (unlikely(ret != xpcSuccess)) {
592                         atomic_dec(&queued_msg->use_count);
593                         continue;
594                 }
595
596         }
597
598         if (atomic_dec_return(&queued_msg->use_count) == 0) {
599                 dev_dbg(xpnet, "no partitions to receive packet destined for "
600                         "%d\n", dest_partid);
601
602
603                 dev_kfree_skb(skb);
604                 kfree(queued_msg);
605         }
606
607         priv->stats.tx_packets++;
608         priv->stats.tx_bytes += skb->len;
609
610         return 0;
611 }
612
613
614 /*
615  * Deal with transmit timeouts coming from the network layer.
616  */
617 static void
618 xpnet_dev_tx_timeout (struct net_device *dev)
619 {
620         struct xpnet_dev_private *priv;
621
622
623         priv = (struct xpnet_dev_private *) dev->priv;
624
625         priv->stats.tx_errors++;
626         return;
627 }
628
629
630 static int __init
631 xpnet_init(void)
632 {
633         int i;
634         u32 license_num;
635         int result = -ENOMEM;
636
637
638         if (!ia64_platform_is("sn2")) {
639                 return -ENODEV;
640         }
641
642         dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
643
644         /*
645          * use ether_setup() to init the majority of our device
646          * structure and then override the necessary pieces.
647          */
648         xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
649                                     XPNET_DEVICE_NAME, ether_setup);
650         if (xpnet_device == NULL) {
651                 return -ENOMEM;
652         }
653
654         netif_carrier_off(xpnet_device);
655
656         xpnet_device->mtu = XPNET_DEF_MTU;
657         xpnet_device->change_mtu = xpnet_dev_change_mtu;
658         xpnet_device->open = xpnet_dev_open;
659         xpnet_device->get_stats = xpnet_dev_get_stats;
660         xpnet_device->stop = xpnet_dev_stop;
661         xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit;
662         xpnet_device->tx_timeout = xpnet_dev_tx_timeout;
663         xpnet_device->set_config = xpnet_dev_set_config;
664
665         /*
666          * Multicast assumes the LSB of the first octet is set for multicast
667          * MAC addresses.  We chose the first octet of the MAC to be unlikely
668          * to collide with any vendor's officially issued MAC.
669          */
670         xpnet_device->dev_addr[0] = 0xfe;
671         xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
672         license_num = sn_partition_serial_number_val();
673         for (i = 3; i >= 0; i--) {
674                 xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
675                                                         license_num & 0xff;
676                 license_num = license_num >> 8;
677         }
678
679         /*
680          * ether_setup() sets this to a multicast device.  We are
681          * really not supporting multicast at this time.
682          */
683         xpnet_device->flags &= ~IFF_MULTICAST;
684
685         /*
686          * No need to checksum as it is a DMA transfer.  The BTE will
687          * report an error if the data is not retrievable and the
688          * packet will be dropped.
689          */
690         xpnet_device->features = NETIF_F_NO_CSUM;
691
692         result = register_netdev(xpnet_device);
693         if (result != 0) {
694                 free_netdev(xpnet_device);
695         }
696
697         return result;
698 }
699 module_init(xpnet_init);
700
701
702 static void __exit
703 xpnet_exit(void)
704 {
705         dev_info(xpnet, "unregistering network device %s\n",
706                 xpnet_device[0].name);
707
708         unregister_netdev(xpnet_device);
709
710         free_netdev(xpnet_device);
711 }
712 module_exit(xpnet_exit);
713
714
715 MODULE_AUTHOR("Silicon Graphics, Inc.");
716 MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
717 MODULE_LICENSE("GPL");
718