SAFE public projects git trees. - safe/jmp/linux-2.6/blob - arch/arm/mach-omap/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/device.h>
  19
  20 #include <asm/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <asm/arch/gpio.h>
  26 #include <asm/arch/mux.h>
  27 #include <asm/arch/usb.h>
  28 #include <asm/arch/board.h>
  29
  30 #include "common.h"
  31
  32 static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
  33
  34 static void __init omap_generic_init_irq(void)
  35 {
  36         omap_init_irq();
  37 }
  38
  39 /* assume no Mini-AB port */
  40
  41 #ifdef CONFIG_ARCH_OMAP1510
  42 static struct omap_usb_config generic1510_usb_config __initdata = {
  43         .register_host  = 1,
  44         .register_dev   = 1,
  45         .hmc_mode       = 16,
  46         .pins[0]        = 3,
  47 };
  48 #endif
  49
  50 #if defined(CONFIG_ARCH_OMAP16XX)
  51 static struct omap_usb_config generic1610_usb_config __initdata = {
  52         .register_host  = 1,
  53         .register_dev   = 1,
  54         .hmc_mode       = 16,
  55         .pins[0]        = 6,
  56 };
  57 #endif
  58
  59 static struct omap_board_config_kernel generic_config[] = {
  60         { OMAP_TAG_USB,           NULL },
  61 };
  62
  63 static void __init omap_generic_init(void)
  64 {
  65         /*
  66          * Make sure the serial ports are muxed on at this point.
  67          * You have to mux them off in device drivers later on
  68          * if not needed.
  69          */
  70 #ifdef CONFIG_ARCH_OMAP1510
  71         if (cpu_is_omap1510()) {
  72                 generic_config[0].data = &generic1510_usb_config;
  73         }
  74 #endif
  75 #if defined(CONFIG_ARCH_OMAP16XX)
  76         if (!cpu_is_omap1510()) {
  77                 generic_config[0].data = &generic1610_usb_config;
  78         }
  79 #endif
  80         omap_board_config = generic_config;
  81         omap_board_config_size = ARRAY_SIZE(generic_config);
  82         omap_serial_init(generic_serial_ports);
  83 }
  84
  85 static void __init omap_generic_map_io(void)
  86 {
  87         omap_map_io();
  88 }
  89
  90 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
  91         /* Maintainer: Tony Lindgren <tony@atomide.com> */
  92         .phys_ram       = 0x10000000,
  93         .phys_io        = 0xfff00000,
  94         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
  95         .boot_params    = 0x10000100,
  96         .map_io         = omap_generic_map_io,
  97         .init_irq       = omap_generic_init_irq,
  98         .init_machine   = omap_generic_init,
  99         .timer          = &omap_timer,
 100 MACHINE_END