b43: N-PHY: partly implement SPUR workaround
authorRafał Miłecki <zajec5@gmail.com>
Thu, 4 Feb 2010 11:23:12 +0000 (12:23 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 8 Feb 2010 21:50:55 +0000 (16:50 -0500)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/b43/phy_n.c
drivers/net/wireless/b43/phy_n.h

index b332ffb..74642d4 100644 (file)
@@ -717,6 +717,67 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
                b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SpurWar */
+static void b43_nphy_spur_workaround(struct b43_wldev *dev)
+{
+       struct b43_phy_n *nphy = dev->phy.n;
+
+       unsigned int channel;
+       int tone[2] = { 57, 58 };
+       u32 noise[2] = { 0x3FF, 0x3FF };
+
+       B43_WARN_ON(dev->phy.rev < 3);
+
+       if (nphy->hang_avoid)
+               b43_nphy_stay_in_carrier_search(dev, 1);
+
+       /* FIXME: channel = radio_chanspec */
+
+       if (nphy->gband_spurwar_en) {
+               /* TODO: N PHY Adjust Analog Pfbw (7) */
+               if (channel == 11 && dev->phy.is_40mhz)
+                       ; /* TODO: N PHY Adjust Min Noise Var(2, tone, noise)*/
+               else
+                       ; /* TODO: N PHY Adjust Min Noise Var(0, NULL, NULL)*/
+               /* TODO: N PHY Adjust CRS Min Power (0x1E) */
+       }
+
+       if (nphy->aband_spurwar_en) {
+               if (channel == 54) {
+                       tone[0] = 0x20;
+                       noise[0] = 0x25F;
+               } else if (channel == 38 || channel == 102 || channel == 118) {
+                       if (0 /* FIXME */) {
+                               tone[0] = 0x20;
+                               noise[0] = 0x21F;
+                       } else {
+                               tone[0] = 0;
+                               noise[0] = 0;
+                       }
+               } else if (channel == 134) {
+                       tone[0] = 0x20;
+                       noise[0] = 0x21F;
+               } else if (channel == 151) {
+                       tone[0] = 0x10;
+                       noise[0] = 0x23F;
+               } else if (channel == 153 || channel == 161) {
+                       tone[0] = 0x30;
+                       noise[0] = 0x23F;
+               } else {
+                       tone[0] = 0;
+                       noise[0] = 0;
+               }
+
+               if (!tone[0] && !noise[0])
+                       ; /* TODO: N PHY Adjust Min Noise Var(1, tone, noise)*/
+               else
+                       ; /* TODO: N PHY Adjust Min Noise Var(0, NULL, NULL)*/
+       }
+
+       if (nphy->hang_avoid)
+               b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
 static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev)
 {
@@ -3055,7 +3116,8 @@ int b43_phy_initn(struct b43_wldev *dev)
        if (phy->rev >= 3 && phy->rev <= 6)
                b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014);
        b43_nphy_tx_lp_fbw(dev);
-       /* TODO N PHY Spur Workaround */
+       if (phy->rev >= 3)
+               b43_nphy_spur_workaround(dev);
 
        b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
        return 0;
index 0400a2c..403aad3 100644 (file)
@@ -1002,6 +1002,9 @@ struct b43_phy_n {
        u16 classifier_state;
        u16 clip_state[2];
 
+       bool aband_spurwar_en;
+       bool gband_spurwar_en;
+
        bool ipa2g_on;
        u8 iqcal_chanspec_2G;
        u8 rssical_chanspec_2G;