bool
depends on FB
-config FB_METRONOME
- tristate
- depends on FB
- depends on FB_DEFERRED_IO
-
config FB_HECUBA
tristate
depends on FB
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the frame buffer device driver for the Permedia2 AGP frame
- buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
- product page at
- <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+ This is the frame buffer device driver for cards based on
+ the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+ The driver was tested on the following cards:
+ Diamond FireGL 1000 PRO AGP
+ ELSA Gloria Synergy PCI
+ Appian Jeronimo PRO (both heads) PCI
+ 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+ Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+ ASK Graphic Blaster Exxtreme AGP
+
+ To compile this driver as a module, choose M here: the
+ module will be called pm2fb.
config FB_PM2_FIFO_DISCONNECT
bool "enable FIFO disconnect feature"
depends on FB_PM2 && PCI
help
- Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+ Support the Permedia2 FIFO disconnect feature.
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
(315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
as XGI V3XT, V5, V8 and Z7.
+config FB_VIA
+ tristate "VIA UniChrome (Pro) and Chrome9 display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select I2C_ALGOBIT
+ select I2C
+ help
+ This is the frame buffer device driver for Graphics chips of VIA
+ UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+ CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ /P4M900,VX800)
+ Say Y if you have a VIA UniChrome graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called viafb.
config FB_NEOMAGIC
tristate "NeoMagic display support"
depends on FB && PCI
module will be called kyrofb.
config FB_3DFX
- tristate "3Dfx Banshee/Voodoo3 display support"
+ tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
help
- This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
- chips. Say Y if you have such a graphics board.
+ This driver supports graphics boards with the 3Dfx Banshee,
+ Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+ such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tdfxfb.
config FB_3DFX_ACCEL
- bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+ bool "3Dfx Acceleration functions (EXPERIMENTAL)"
depends on FB_3DFX && EXPERIMENTAL
---help---
- This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
- with acceleration functions.
-
+ This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+ device driver with acceleration functions.
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
graphics core integrated in the VIA VT8601A North Bridge,
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
- This driver is supposed to support graphics boards with the
- Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
+ This is the frame buffer device driver for Trident PCI/AGP chipsets.
+ Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+ and Blade XP.
+ There are also integrated versions of these chips called CyberXXXX,
+ CyberImage or CyberBlade. These chips are mostly found in laptops
but also on some motherboards. For more information, read
<file:Documentation/fb/tridentfb.txt>
- Cyberblade/i1 support will be removed soon, use the cyblafb driver
- instead.
-
Say Y if you have such a graphics board.
-
To compile this driver as a module, choose M here: the
module will be called tridentfb.
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
-config FB_AM200EPD
- tristate "AM-200 E-Ink EPD devkit support"
- depends on FB && ARCH_PXA && MMU
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select FB_METRONOME
- help
- This enables support for the Metronome display controller used on
- the E-Ink AM-200 EPD devkit.
-
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
frame buffer driver. It communicates with a back-end
in another domain.
+config FB_METRONOME
+ tristate "E-Ink Metronome/8track controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Metronome
+ controller. The pre-release name for this device was 8track
+ and could also have been called by some vendors as PVI-nnnn.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff