#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/ctype.h>
+#include <linux/nls.h>
#include <linux/device.h>
+#include <linux/scatterlist.h>
#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h> /* for usbcore internals */
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
-#include "hcd.h" /* for usbcore internals */
#include "usb.h"
+static void cancel_async_set_config(struct usb_device *udev);
+
struct api_context {
struct completion done;
int status;
* own interruptible routines.
*/
static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
-{
+{
struct api_context ctx;
unsigned long expire;
int retval;
retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status);
dev_dbg(&urb->dev->dev,
- "%s timed out on ep%d%s len=%d/%d\n",
+ "%s timed out on ep%d%s len=%u/%u\n",
current->comm,
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out",
+ usb_endpoint_num(&urb->ep->desc),
+ usb_urb_dir_in(urb) ? "in" : "out",
urb->actual_length,
urb->transfer_buffer_length);
} else
}
/*-------------------------------------------------------------------*/
-// returns status (negative) or length (positive)
+/* returns status (negative) or length (positive) */
static int usb_internal_control_msg(struct usb_device *usb_dev,
- unsigned int pipe,
+ unsigned int pipe,
struct usb_ctrlrequest *cmd,
void *data, int len, int timeout)
{
urb = usb_alloc_urb(0, GFP_NOIO);
if (!urb)
return -ENOMEM;
-
+
usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data,
len, usb_api_blocking_completion, NULL);
}
/**
- * usb_control_msg - Builds a control urb, sends it off and waits for completion
- * @dev: pointer to the usb device to send the message to
- * @pipe: endpoint "pipe" to send the message to
- * @request: USB message request value
- * @requesttype: USB message request type value
- * @value: USB message value
- * @index: USB message index value
- * @data: pointer to the data to send
- * @size: length in bytes of the data to send
- * @timeout: time in msecs to wait for the message to complete before
- * timing out (if 0 the wait is forever)
- * Context: !in_interrupt ()
- *
- * This function sends a simple control message to a specified endpoint
- * and waits for the message to complete, or timeout.
- *
- * If successful, it returns the number of bytes transferred, otherwise a negative error number.
- *
- * Don't use this function from within an interrupt context, like a
- * bottom half handler. If you need an asynchronous message, or need to send
- * a message from within interrupt context, use usb_submit_urb()
- * If a thread in your driver uses this call, make sure your disconnect()
- * method can wait for it to complete. Since you don't have a handle on
- * the URB used, you can't cancel the request.
+ * usb_control_msg - Builds a control urb, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @data: pointer to the data to send
+ * @size: length in bytes of the data to send
+ * @timeout: time in msecs to wait for the message to complete before timing
+ * out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple control message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * If successful, it returns the number of bytes transferred, otherwise a
+ * negative error number.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler. If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb().
+ * If a thread in your driver uses this call, make sure your disconnect()
+ * method can wait for it to complete. Since you don't have a handle on the
+ * URB used, you can't cancel the request.
*/
-int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
- __u16 value, __u16 index, void *data, __u16 size, int timeout)
+int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
+ __u8 requesttype, __u16 value, __u16 index, void *data,
+ __u16 size, int timeout)
{
- struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ struct usb_ctrlrequest *dr;
int ret;
-
+
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
if (!dr)
return -ENOMEM;
- dr->bRequestType= requesttype;
+ dr->bRequestType = requesttype;
dr->bRequest = request;
- dr->wValue = cpu_to_le16p(&value);
- dr->wIndex = cpu_to_le16p(&index);
- dr->wLength = cpu_to_le16p(&size);
+ dr->wValue = cpu_to_le16(value);
+ dr->wIndex = cpu_to_le16(index);
+ dr->wLength = cpu_to_le16(size);
- //dbg("usb_control_msg");
+ /* dbg("usb_control_msg"); */
ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
return ret;
}
-
+EXPORT_SYMBOL_GPL(usb_control_msg);
/**
* usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion
* @pipe: endpoint "pipe" to send the message to
* @data: pointer to the data to send
* @len: length in bytes of the data to send
- * @actual_length: pointer to a location to put the actual length transferred in bytes
+ * @actual_length: pointer to a location to put the actual length transferred
+ * in bytes
* @timeout: time in msecs to wait for the message to complete before
* timing out (if 0 the wait is forever)
+ *
* Context: !in_interrupt ()
*
* This function sends a simple interrupt message to a specified endpoint and
EXPORT_SYMBOL_GPL(usb_interrupt_msg);
/**
- * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
- * @usb_dev: pointer to the usb device to send the message to
- * @pipe: endpoint "pipe" to send the message to
- * @data: pointer to the data to send
- * @len: length in bytes of the data to send
- * @actual_length: pointer to a location to put the actual length transferred in bytes
- * @timeout: time in msecs to wait for the message to complete before
- * timing out (if 0 the wait is forever)
- * Context: !in_interrupt ()
- *
- * This function sends a simple bulk message to a specified endpoint
- * and waits for the message to complete, or timeout.
- *
- * If successful, it returns 0, otherwise a negative error number.
- * The number of actual bytes transferred will be stored in the
- * actual_length paramater.
- *
- * Don't use this function from within an interrupt context, like a
- * bottom half handler. If you need an asynchronous message, or need to
- * send a message from within interrupt context, use usb_submit_urb()
- * If a thread in your driver uses this call, make sure your disconnect()
- * method can wait for it to complete. Since you don't have a handle on
- * the URB used, you can't cancel the request.
- *
- * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT
- * ioctl, users are forced to abuse this routine by using it to submit
- * URBs for interrupt endpoints. We will take the liberty of creating
- * an interrupt URB (with the default interval) if the target is an
- * interrupt endpoint.
+ * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred
+ * in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ * timing out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple bulk message to a specified endpoint
+ * and waits for the message to complete, or timeout.
+ *
+ * If successful, it returns 0, otherwise a negative error number. The number
+ * of actual bytes transferred will be stored in the actual_length paramater.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler. If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb() If a thread in your
+ * driver uses this call, make sure your disconnect() method can wait for it to
+ * complete. Since you don't have a handle on the URB used, you can't cancel
+ * the request.
+ *
+ * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl,
+ * users are forced to abuse this routine by using it to submit URBs for
+ * interrupt endpoints. We will take the liberty of creating an interrupt URB
+ * (with the default interval) if the target is an interrupt endpoint.
*/
-int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
- void *data, int len, int *actual_length, int timeout)
+int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
+ void *data, int len, int *actual_length, int timeout)
{
struct urb *urb;
struct usb_host_endpoint *ep;
- ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out)
- [usb_pipeendpoint(pipe)];
+ ep = usb_pipe_endpoint(usb_dev, pipe);
if (!ep || len < 0)
return -EINVAL;
return usb_start_wait_urb(urb, timeout, actual_length);
}
+EXPORT_SYMBOL_GPL(usb_bulk_msg);
/*-------------------------------------------------------------------*/
-static void sg_clean (struct usb_sg_request *io)
+static void sg_clean(struct usb_sg_request *io)
{
if (io->urbs) {
while (io->entries--)
- usb_free_urb (io->urbs [io->entries]);
- kfree (io->urbs);
+ usb_free_urb(io->urbs [io->entries]);
+ kfree(io->urbs);
io->urbs = NULL;
}
- if (io->dev->dev.dma_mask != NULL)
- usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
io->dev = NULL;
}
-static void sg_complete (struct urb *urb)
+static void sg_complete(struct urb *urb)
{
- struct usb_sg_request *io = urb->context;
+ struct usb_sg_request *io = urb->context;
int status = urb->status;
- spin_lock (&io->lock);
+ spin_lock(&io->lock);
/* In 2.5 we require hcds' endpoint queues not to progress after fault
* reports, until the completion callback (this!) returns. That lets
&& (io->status != -ECONNRESET
|| status != -ECONNRESET)
&& urb->actual_length) {
- dev_err (io->dev->bus->controller,
+ dev_err(io->dev->bus->controller,
"dev %s ep%d%s scatterlist error %d/%d\n",
io->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out",
+ usb_endpoint_num(&urb->ep->desc),
+ usb_urb_dir_in(urb) ? "in" : "out",
status, io->status);
- // BUG ();
+ /* BUG (); */
}
if (io->status == 0 && status && status != -ECONNRESET) {
* unlink pending urbs so they won't rx/tx bad data.
* careful: unlink can sometimes be synchronous...
*/
- spin_unlock (&io->lock);
+ spin_unlock(&io->lock);
for (i = 0, found = 0; i < io->entries; i++) {
if (!io->urbs [i] || !io->urbs [i]->dev)
continue;
if (found) {
- retval = usb_unlink_urb (io->urbs [i]);
+ retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS &&
retval != -ENODEV &&
retval != -EBUSY)
- dev_err (&io->dev->dev,
+ dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
} else if (urb == io->urbs [i])
found = 1;
}
- spin_lock (&io->lock);
+ spin_lock(&io->lock);
}
urb->dev = NULL;
io->bytes += urb->actual_length;
io->count--;
if (!io->count)
- complete (&io->complete);
+ complete(&io->complete);
- spin_unlock (&io->lock);
+ spin_unlock(&io->lock);
}
* The request may be canceled with usb_sg_cancel(), either before or after
* usb_sg_wait() is called.
*/
-int usb_sg_init (
- struct usb_sg_request *io,
- struct usb_device *dev,
- unsigned pipe,
- unsigned period,
- struct scatterlist *sg,
- int nents,
- size_t length,
- gfp_t mem_flags
-)
+int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
+ unsigned pipe, unsigned period, struct scatterlist *sg,
+ int nents, size_t length, gfp_t mem_flags)
{
- int i;
- int urb_flags;
- int dma;
+ int i;
+ int urb_flags;
+ int use_sg;
if (!io || !dev || !sg
- || usb_pipecontrol (pipe)
- || usb_pipeisoc (pipe)
+ || usb_pipecontrol(pipe)
+ || usb_pipeisoc(pipe)
|| nents <= 0)
return -EINVAL;
- spin_lock_init (&io->lock);
+ spin_lock_init(&io->lock);
io->dev = dev;
io->pipe = pipe;
- io->sg = sg;
- io->nents = nents;
- /* not all host controllers use DMA (like the mainstream pci ones);
- * they can use PIO (sl811) or be software over another transport.
- */
- dma = (dev->dev.dma_mask != NULL);
- if (dma)
- io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
- else
+ if (dev->bus->sg_tablesize > 0) {
+ use_sg = true;
+ io->entries = 1;
+ } else {
+ use_sg = false;
io->entries = nents;
+ }
/* initialize all the urbs we'll use */
- if (io->entries <= 0)
- return io->entries;
-
- io->count = io->entries;
- io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags);
+ io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
if (!io->urbs)
goto nomem;
- urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
- if (usb_pipein (pipe))
+ urb_flags = URB_NO_INTERRUPT;
+ if (usb_pipein(pipe))
urb_flags |= URB_SHORT_NOT_OK;
- for (i = 0; i < io->entries; i++) {
- unsigned len;
+ for_each_sg(sg, sg, io->entries, i) {
+ struct urb *urb;
+ unsigned len;
- io->urbs [i] = usb_alloc_urb (0, mem_flags);
- if (!io->urbs [i]) {
+ urb = usb_alloc_urb(0, mem_flags);
+ if (!urb) {
io->entries = i;
goto nomem;
}
-
- io->urbs [i]->dev = NULL;
- io->urbs [i]->pipe = pipe;
- io->urbs [i]->interval = period;
- io->urbs [i]->transfer_flags = urb_flags;
-
- io->urbs [i]->complete = sg_complete;
- io->urbs [i]->context = io;
-
- /*
- * Some systems need to revert to PIO when DMA is temporarily
- * unavailable. For their sakes, both transfer_buffer and
- * transfer_dma are set when possible. However this can only
- * work on systems without:
- *
- * - HIGHMEM, since DMA buffers located in high memory are
- * not directly addressable by the CPU for PIO;
- *
- * - IOMMU, since dma_map_sg() is allowed to use an IOMMU to
- * make virtually discontiguous buffers be "dma-contiguous"
- * so that PIO and DMA need diferent numbers of URBs.
- *
- * So when HIGHMEM or IOMMU are in use, transfer_buffer is NULL
- * to prevent stale pointers and to help spot bugs.
- */
- if (dma) {
- io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
- len = sg_dma_len (sg + i);
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_IOMMU)
- io->urbs[i]->transfer_buffer = NULL;
-#else
- io->urbs[i]->transfer_buffer =
- page_address(sg[i].page) + sg[i].offset;
-#endif
+ io->urbs[i] = urb;
+
+ urb->dev = NULL;
+ urb->pipe = pipe;
+ urb->interval = period;
+ urb->transfer_flags = urb_flags;
+ urb->complete = sg_complete;
+ urb->context = io;
+ urb->sg = sg;
+
+ if (use_sg) {
+ /* There is no single transfer buffer */
+ urb->transfer_buffer = NULL;
+ urb->num_sgs = nents;
+
+ /* A length of zero means transfer the whole sg list */
+ len = length;
+ if (len == 0) {
+ for_each_sg(sg, sg, nents, i)
+ len += sg->length;
+ }
} else {
- /* hc may use _only_ transfer_buffer */
- io->urbs [i]->transfer_buffer =
- page_address (sg [i].page) + sg [i].offset;
- len = sg [i].length;
- }
-
- if (length) {
- len = min_t (unsigned, len, length);
- length -= len;
- if (length == 0)
- io->entries = i + 1;
+ /*
+ * Some systems can't use DMA; they use PIO instead.
+ * For their sakes, transfer_buffer is set whenever
+ * possible.
+ */
+ if (!PageHighMem(sg_page(sg)))
+ urb->transfer_buffer = sg_virt(sg);
+ else
+ urb->transfer_buffer = NULL;
+
+ len = sg->length;
+ if (length) {
+ len = min_t(unsigned, len, length);
+ length -= len;
+ if (length == 0)
+ io->entries = i + 1;
+ }
}
- io->urbs [i]->transfer_buffer_length = len;
+ urb->transfer_buffer_length = len;
}
- io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT;
+ io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
/* transaction state */
+ io->count = io->entries;
io->status = 0;
io->bytes = 0;
- init_completion (&io->complete);
+ init_completion(&io->complete);
return 0;
nomem:
- sg_clean (io);
+ sg_clean(io);
return -ENOMEM;
}
-
+EXPORT_SYMBOL_GPL(usb_sg_init);
/**
* usb_sg_wait - synchronously execute scatter/gather request
* could be transferred. That capability is less useful for low or full
* speed interrupt endpoints, which allow at most one packet per millisecond,
* of at most 8 or 64 bytes (respectively).
+ *
+ * It is not necessary to call this function to reserve bandwidth for devices
+ * under an xHCI host controller, as the bandwidth is reserved when the
+ * configuration or interface alt setting is selected.
*/
-void usb_sg_wait (struct usb_sg_request *io)
+void usb_sg_wait(struct usb_sg_request *io)
{
- int i, entries = io->entries;
+ int i;
+ int entries = io->entries;
/* queue the urbs. */
- spin_lock_irq (&io->lock);
+ spin_lock_irq(&io->lock);
i = 0;
while (i < entries && !io->status) {
- int retval;
+ int retval;
- io->urbs [i]->dev = io->dev;
- retval = usb_submit_urb (io->urbs [i], GFP_ATOMIC);
+ io->urbs[i]->dev = io->dev;
+ retval = usb_submit_urb(io->urbs [i], GFP_ATOMIC);
/* after we submit, let completions or cancelations fire;
* we handshake using io->status.
*/
- spin_unlock_irq (&io->lock);
+ spin_unlock_irq(&io->lock);
switch (retval) {
/* maybe we retrying will recover */
- case -ENXIO: // hc didn't queue this one
+ case -ENXIO: /* hc didn't queue this one */
case -EAGAIN:
case -ENOMEM:
io->urbs[i]->dev = NULL;
retval = 0;
- yield ();
+ yield();
break;
/* no error? continue immediately.
*/
case 0:
++i;
- cpu_relax ();
+ cpu_relax();
break;
/* fail any uncompleted urbs */
default:
- io->urbs [i]->dev = NULL;
- io->urbs [i]->status = retval;
- dev_dbg (&io->dev->dev, "%s, submit --> %d\n",
- __FUNCTION__, retval);
- usb_sg_cancel (io);
+ io->urbs[i]->dev = NULL;
+ io->urbs[i]->status = retval;
+ dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
+ __func__, retval);
+ usb_sg_cancel(io);
}
- spin_lock_irq (&io->lock);
+ spin_lock_irq(&io->lock);
if (retval && (io->status == 0 || io->status == -ECONNRESET))
io->status = retval;
}
io->count -= entries - i;
if (io->count == 0)
- complete (&io->complete);
- spin_unlock_irq (&io->lock);
+ complete(&io->complete);
+ spin_unlock_irq(&io->lock);
/* OK, yes, this could be packaged as non-blocking.
* So could the submit loop above ... but it's easier to
* solve neither problem than to solve both!
*/
- wait_for_completion (&io->complete);
+ wait_for_completion(&io->complete);
- sg_clean (io);
+ sg_clean(io);
}
+EXPORT_SYMBOL_GPL(usb_sg_wait);
/**
* usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait()
* It can also prevents one initialized by usb_sg_init() from starting,
* so that call just frees resources allocated to the request.
*/
-void usb_sg_cancel (struct usb_sg_request *io)
+void usb_sg_cancel(struct usb_sg_request *io)
{
- unsigned long flags;
+ unsigned long flags;
- spin_lock_irqsave (&io->lock, flags);
+ spin_lock_irqsave(&io->lock, flags);
/* shut everything down, if it didn't already */
if (!io->status) {
- int i;
+ int i;
io->status = -ECONNRESET;
- spin_unlock (&io->lock);
+ spin_unlock(&io->lock);
for (i = 0; i < io->entries; i++) {
- int retval;
+ int retval;
if (!io->urbs [i]->dev)
continue;
- retval = usb_unlink_urb (io->urbs [i]);
+ retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS && retval != -EBUSY)
- dev_warn (&io->dev->dev, "%s, unlink --> %d\n",
- __FUNCTION__, retval);
+ dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
+ __func__, retval);
}
- spin_lock (&io->lock);
+ spin_lock(&io->lock);
}
- spin_unlock_irqrestore (&io->lock, flags);
+ spin_unlock_irqrestore(&io->lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_sg_cancel);
/*-------------------------------------------------------------------*/
* Returns the number of bytes received on success, or else the status code
* returned by the underlying usb_control_msg() call.
*/
-int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size)
+int usb_get_descriptor(struct usb_device *dev, unsigned char type,
+ unsigned char index, void *buf, int size)
{
int i;
int result;
-
- memset(buf,0,size); // Make sure we parse really received data
+
+ memset(buf, 0, size); /* Make sure we parse really received data */
for (i = 0; i < 3; ++i) {
/* retry on length 0 or error; some devices are flakey */
if (result <= 0 && result != -ETIMEDOUT)
continue;
if (result > 1 && ((u8 *)buf)[1] != type) {
- result = -EPROTO;
+ result = -ENODATA;
continue;
}
break;
}
return result;
}
+EXPORT_SYMBOL_GPL(usb_get_descriptor);
/**
* usb_get_string - gets a string descriptor
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
(USB_DT_STRING << 8) + index, langid, buf, size,
USB_CTRL_GET_TIMEOUT);
- if (!(result == 0 || result == -EPIPE))
- break;
+ if (result == 0 || result == -EPIPE)
+ continue;
+ if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+ result = -ENODATA;
+ continue;
+ }
+ break;
}
return result;
}
}
static int usb_string_sub(struct usb_device *dev, unsigned int langid,
- unsigned int index, unsigned char *buf)
+ unsigned int index, unsigned char *buf)
{
int rc;
return rc;
}
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+ int err;
+
+ if (dev->have_langid)
+ return 0;
+
+ if (dev->string_langid < 0)
+ return -EPIPE;
+
+ err = usb_string_sub(dev, 0, 0, tbuf);
+
+ /* If the string was reported but is malformed, default to english
+ * (0x0409) */
+ if (err == -ENODATA || (err > 0 && err < 4)) {
+ dev->string_langid = 0x0409;
+ dev->have_langid = 1;
+ dev_err(&dev->dev,
+ "string descriptor 0 malformed (err = %d), "
+ "defaulting to 0x%04x\n",
+ err, dev->string_langid);
+ return 0;
+ }
+
+ /* In case of all other errors, we assume the device is not able to
+ * deal with strings at all. Set string_langid to -1 in order to
+ * prevent any string to be retrieved from the device */
+ if (err < 0) {
+ dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+ err);
+ dev->string_langid = -1;
+ return -EPIPE;
+ }
+
+ /* always use the first langid listed */
+ dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+ dev->have_langid = 1;
+ dev_dbg(&dev->dev, "default language 0x%04x\n",
+ dev->string_langid);
+ return 0;
+}
+
/**
- * usb_string - returns ISO 8859-1 version of a string descriptor
+ * usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
* @index: the number of the descriptor
* @buf: where to put the string
* @size: how big is "buf"?
* Context: !in_interrupt ()
- *
+ *
* This converts the UTF-16LE encoded strings returned by devices, from
- * usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones
- * that are more usable in most kernel contexts. Note that all characters
- * in the chosen descriptor that can't be encoded using ISO-8859-1
- * are converted to the question mark ("?") character, and this function
+ * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
+ * that are more usable in most kernel contexts. Note that this function
* chooses strings in the first language supported by the device.
*
- * The ASCII (or, redundantly, "US-ASCII") character set is the seven-bit
- * subset of ISO 8859-1. ISO-8859-1 is the eight-bit subset of Unicode,
- * and is appropriate for use many uses of English and several other
- * Western European languages. (But it doesn't include the "Euro" symbol.)
- *
* This call is synchronous, and may not be used in an interrupt context.
*
* Returns length of the string (>= 0) or usb_control_msg status (< 0).
{
unsigned char *tbuf;
int err;
- unsigned int u, idx;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
if (size <= 0 || !buf || !index)
return -EINVAL;
buf[0] = 0;
- tbuf = kmalloc(256, GFP_KERNEL);
+ tbuf = kmalloc(256, GFP_NOIO);
if (!tbuf)
return -ENOMEM;
- /* get langid for strings if it's not yet known */
- if (!dev->have_langid) {
- err = usb_string_sub(dev, 0, 0, tbuf);
- if (err < 0) {
- dev_err (&dev->dev,
- "string descriptor 0 read error: %d\n",
- err);
- goto errout;
- } else if (err < 4) {
- dev_err (&dev->dev, "string descriptor 0 too short\n");
- err = -EINVAL;
- goto errout;
- } else {
- dev->have_langid = 1;
- dev->string_langid = tbuf[2] | (tbuf[3]<< 8);
- /* always use the first langid listed */
- dev_dbg (&dev->dev, "default language 0x%04x\n",
- dev->string_langid);
- }
- }
-
+ err = usb_get_langid(dev, tbuf);
+ if (err < 0)
+ goto errout;
+
err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
goto errout;
size--; /* leave room for trailing NULL char in output buffer */
- for (idx = 0, u = 2; u < err; u += 2) {
- if (idx >= size)
- break;
- if (tbuf[u+1]) /* high byte */
- buf[idx++] = '?'; /* non ISO-8859-1 character */
- else
- buf[idx++] = tbuf[u];
- }
- buf[idx] = 0;
- err = idx;
+ err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
+ UTF16_LITTLE_ENDIAN, buf, size);
+ buf[err] = 0;
if (tbuf[1] != USB_DT_STRING)
- dev_dbg(&dev->dev, "wrong descriptor type %02x for string %d (\"%s\")\n", tbuf[1], index, buf);
+ dev_dbg(&dev->dev,
+ "wrong descriptor type %02x for string %d (\"%s\")\n",
+ tbuf[1], index, buf);
errout:
kfree(tbuf);
return err;
}
+EXPORT_SYMBOL_GPL(usb_string);
+
+/* one UTF-8-encoded 16-bit character has at most three bytes */
+#define MAX_USB_STRING_SIZE (127 * 3 + 1)
/**
* usb_cache_string - read a string descriptor and cache it for later use
char *smallbuf = NULL;
int len;
- if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) {
- if ((len = usb_string(udev, index, buf, 256)) > 0) {
- if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL)
+ if (index <= 0)
+ return NULL;
+
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
+ if (buf) {
+ len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
+ if (len > 0) {
+ smallbuf = kmalloc(++len, GFP_NOIO);
+ if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
}
return -ENOMEM;
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size);
- if (ret >= 0)
+ if (ret >= 0)
memcpy(&dev->descriptor, desc, size);
kfree(desc);
return ret;
kfree(status);
return ret;
}
+EXPORT_SYMBOL_GPL(usb_get_status);
/**
* usb_clear_halt - tells device to clear endpoint halt/stall condition
{
int result;
int endp = usb_pipeendpoint(pipe);
-
- if (usb_pipein (pipe))
+
+ if (usb_pipein(pipe))
endp |= USB_DIR_IN;
/* we don't care if it wasn't halted first. in fact some devices
* the copy in usb-storage, for as long as we need two copies.
*/
- /* toggle was reset by the clear */
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+ usb_reset_endpoint(dev, endp);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_clear_halt);
+
+static int create_intf_ep_devs(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_interface *alt = intf->cur_altsetting;
+ int i;
+
+ if (intf->ep_devs_created || intf->unregistering)
+ return 0;
+ for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+ (void) usb_create_ep_devs(&intf->dev, &alt->endpoint[i], udev);
+ intf->ep_devs_created = 1;
return 0;
}
+static void remove_intf_ep_devs(struct usb_interface *intf)
+{
+ struct usb_host_interface *alt = intf->cur_altsetting;
+ int i;
+
+ if (!intf->ep_devs_created)
+ return;
+
+ for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+ usb_remove_ep_devs(&alt->endpoint[i]);
+ intf->ep_devs_created = 0;
+}
+
/**
* usb_disable_endpoint -- Disable an endpoint by address
* @dev: the device whose endpoint is being disabled
* @epaddr: the endpoint's address. Endpoint number for output,
* endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ * controller hardware
*
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
*/
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+ bool reset_hardware)
{
unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
struct usb_host_endpoint *ep;
if (usb_endpoint_out(epaddr)) {
ep = dev->ep_out[epnum];
- dev->ep_out[epnum] = NULL;
+ if (reset_hardware)
+ dev->ep_out[epnum] = NULL;
} else {
ep = dev->ep_in[epnum];
- dev->ep_in[epnum] = NULL;
+ if (reset_hardware)
+ dev->ep_in[epnum] = NULL;
}
if (ep) {
ep->enabled = 0;
- usb_hcd_endpoint_disable(dev, ep);
+ usb_hcd_flush_endpoint(dev, ep);
+ if (reset_hardware)
+ usb_hcd_disable_endpoint(dev, ep);
}
}
/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address. Endpoint number for output,
+ * endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_host_endpoint *ep;
+
+ if (usb_endpoint_out(epaddr))
+ ep = dev->ep_out[epnum];
+ else
+ ep = dev->ep_in[epnum];
+ if (ep)
+ usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
* @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ * controller hardware
*
* Disables all the endpoints for the interface's current altsetting.
*/
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+ bool reset_hardware)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
usb_disable_endpoint(dev,
- alt->endpoint[i].desc.bEndpointAddress);
+ alt->endpoint[i].desc.bEndpointAddress,
+ reset_hardware);
}
}
-/*
+/**
* usb_disable_device - Disable all the endpoints for a USB device
* @dev: the device whose endpoints are being disabled
* @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
{
int i;
- dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__,
- skip_ep0 ? "non-ep0" : "all");
+ dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
+ skip_ep0 ? "non-ep0" : "all");
for (i = skip_ep0; i < 16; ++i) {
- usb_disable_endpoint(dev, i);
- usb_disable_endpoint(dev, i + USB_DIR_IN);
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
- dev->toggle[0] = dev->toggle[1] = 0;
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
interface = dev->actconfig->interface[i];
if (!device_is_registered(&interface->dev))
continue;
- dev_dbg (&dev->dev, "unregistering interface %s\n",
- interface->dev.bus_id);
- usb_remove_sysfs_intf_files(interface);
- device_del (&interface->dev);
+ dev_dbg(&dev->dev, "unregistering interface %s\n",
+ dev_name(&interface->dev));
+ interface->unregistering = 1;
+ remove_intf_ep_devs(interface);
+ device_del(&interface->dev);
}
/* Now that the interfaces are unbound, nobody should
* try to access them.
*/
for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
- put_device (&dev->actconfig->interface[i]->dev);
+ put_device(&dev->actconfig->interface[i]->dev);
dev->actconfig->interface[i] = NULL;
}
dev->actconfig = NULL;
}
}
-
-/*
+/**
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
+ * @reset_ep: flag to reset the endpoint state
*
- * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
-void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
+ bool reset_ep)
{
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
- if (is_out || is_control) {
- usb_settoggle(dev, epnum, 1, 0);
+ if (reset_ep)
+ usb_hcd_reset_endpoint(dev, ep);
+ if (is_out || is_control)
dev->ep_out[epnum] = ep;
- }
- if (!is_out || is_control) {
- usb_settoggle(dev, epnum, 0, 0);
+ if (!is_out || is_control)
dev->ep_in[epnum] = ep;
- }
ep->enabled = 1;
}
-/*
+/**
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
+ * @reset_eps: flag to reset the endpoints' state
*
* Enables all the endpoints for the interface's current altsetting.
*/
-static void usb_enable_interface(struct usb_device *dev,
- struct usb_interface *intf)
+void usb_enable_interface(struct usb_device *dev,
+ struct usb_interface *intf, bool reset_eps)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i]);
+ usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
}
/**
{
struct usb_interface *iface;
struct usb_host_interface *alt;
+ struct usb_hcd *hcd = bus_to_hcd(dev->bus);
int ret;
int manual = 0;
+ unsigned int epaddr;
+ unsigned int pipe;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
alt = usb_altnum_to_altsetting(iface, alternate);
if (!alt) {
- warn("selecting invalid altsetting %d", alternate);
+ dev_warn(&dev->dev, "selecting invalid altsetting %d\n",
+ alternate);
return -EINVAL;
}
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ /* Make sure we have enough bandwidth for this alternate interface.
+ * Remove the current alt setting and add the new alt setting.
+ */
+ mutex_lock(&hcd->bandwidth_mutex);
+ ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
+ if (ret < 0) {
+ dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
+ alternate);
+ mutex_unlock(&hcd->bandwidth_mutex);
+ return ret;
+ }
+
+ if (dev->quirks & USB_QUIRK_NO_SET_INTF)
+ ret = -EPIPE;
+ else
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
alternate, interface, NULL, 0, 5000);
"manual set_interface for iface %d, alt %d\n",
interface, alternate);
manual = 1;
- } else if (ret < 0)
+ } else if (ret < 0) {
+ /* Re-instate the old alt setting */
+ usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
+ mutex_unlock(&hcd->bandwidth_mutex);
return ret;
+ }
+ mutex_unlock(&hcd->bandwidth_mutex);
/* FIXME drivers shouldn't need to replicate/bugfix the logic here
* when they implement async or easily-killable versions of this or
*/
/* prevent submissions using previous endpoint settings */
- if (device_is_registered(&iface->dev))
+ if (iface->cur_altsetting != alt) {
+ remove_intf_ep_devs(iface);
usb_remove_sysfs_intf_files(iface);
- usb_disable_interface(dev, iface);
+ }
+ usb_disable_interface(dev, iface, true);
iface->cur_altsetting = alt;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; i++) {
- unsigned int epaddr =
- alt->endpoint[i].desc.bEndpointAddress;
- unsigned int pipe =
- __create_pipe(dev, USB_ENDPOINT_NUMBER_MASK & epaddr)
- | (usb_endpoint_out(epaddr) ? USB_DIR_OUT : USB_DIR_IN);
+ epaddr = alt->endpoint[i].desc.bEndpointAddress;
+ pipe = __create_pipe(dev,
+ USB_ENDPOINT_NUMBER_MASK & epaddr) |
+ (usb_endpoint_out(epaddr) ?
+ USB_DIR_OUT : USB_DIR_IN);
usb_clear_halt(dev, pipe);
}
* during the SETUP stage - hence EP0 toggles are "don't care" here.
* (Likewise, EP0 never "halts" on well designed devices.)
*/
- usb_enable_interface(dev, iface);
- if (device_is_registered(&iface->dev))
+ usb_enable_interface(dev, iface, true);
+ if (device_is_registered(&iface->dev)) {
usb_create_sysfs_intf_files(iface);
-
+ create_intf_ep_devs(iface);
+ }
return 0;
}
+EXPORT_SYMBOL_GPL(usb_set_interface);
/**
* usb_reset_configuration - lightweight device reset
* This issues a standard SET_CONFIGURATION request to the device using
* the current configuration. The effect is to reset most USB-related
* state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
* endpoints). Other usbcore state is unchanged, including bindings of
* usb device drivers to interfaces.
*
* (multi-interface) devices. Instead, the driver for each interface may
* use usb_set_interface() on the interfaces it claims. Be careful though;
* some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles). Resetting the whole
+ * reset all the interface state (notably endpoint state). Resetting the whole
* configuration would affect other drivers' interfaces.
*
* The caller must own the device lock.
{
int i, retval;
struct usb_host_config *config;
+ struct usb_hcd *hcd = bus_to_hcd(dev->bus);
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
*/
for (i = 1; i < 16; ++i) {
- usb_disable_endpoint(dev, i);
- usb_disable_endpoint(dev, i + USB_DIR_IN);
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
config = dev->actconfig;
+ retval = 0;
+ mutex_lock(&hcd->bandwidth_mutex);
+ /* Make sure we have enough bandwidth for each alternate setting 0 */
+ for (i = 0; i < config->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf = config->interface[i];
+ struct usb_host_interface *alt;
+
+ alt = usb_altnum_to_altsetting(intf, 0);
+ if (!alt)
+ alt = &intf->altsetting[0];
+ if (alt != intf->cur_altsetting)
+ retval = usb_hcd_alloc_bandwidth(dev, NULL,
+ intf->cur_altsetting, alt);
+ if (retval < 0)
+ break;
+ }
+ /* If not, reinstate the old alternate settings */
+ if (retval < 0) {
+reset_old_alts:
+ for (i--; i >= 0; i--) {
+ struct usb_interface *intf = config->interface[i];
+ struct usb_host_interface *alt;
+
+ alt = usb_altnum_to_altsetting(intf, 0);
+ if (!alt)
+ alt = &intf->altsetting[0];
+ if (alt != intf->cur_altsetting)
+ usb_hcd_alloc_bandwidth(dev, NULL,
+ alt, intf->cur_altsetting);
+ }
+ mutex_unlock(&hcd->bandwidth_mutex);
+ return retval;
+ }
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0,
config->desc.bConfigurationValue, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval < 0)
- return retval;
-
- dev->toggle[0] = dev->toggle[1] = 0;
+ goto reset_old_alts;
+ mutex_unlock(&hcd->bandwidth_mutex);
/* re-init hc/hcd interface/endpoint state */
for (i = 0; i < config->desc.bNumInterfaces; i++) {
struct usb_interface *intf = config->interface[i];
struct usb_host_interface *alt;
- if (device_is_registered(&intf->dev))
- usb_remove_sysfs_intf_files(intf);
alt = usb_altnum_to_altsetting(intf, 0);
/* No altsetting 0? We'll assume the first altsetting.
if (!alt)
alt = &intf->altsetting[0];
+ if (alt != intf->cur_altsetting) {
+ remove_intf_ep_devs(intf);
+ usb_remove_sysfs_intf_files(intf);
+ }
intf->cur_altsetting = alt;
- usb_enable_interface(dev, intf);
- if (device_is_registered(&intf->dev))
+ usb_enable_interface(dev, intf, true);
+ if (device_is_registered(&intf->dev)) {
usb_create_sysfs_intf_files(intf);
+ create_intf_ep_devs(intf);
+ }
}
return 0;
}
+EXPORT_SYMBOL_GPL(usb_reset_configuration);
-void usb_release_interface(struct device *dev)
+static void usb_release_interface(struct device *dev)
{
struct usb_interface *intf = to_usb_interface(dev);
struct usb_interface_cache *intfc =
}
#ifdef CONFIG_HOTPLUG
-static int usb_if_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
struct usb_interface *intf;
struct usb_host_interface *alt;
- int i = 0;
- int length = 0;
-
- if (!dev)
- return -ENODEV;
-
- /* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
alt = intf->cur_altsetting;
-#ifdef CONFIG_USB_DEVICEFS
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "DEVICE=/proc/bus/usb/%03d/%03d",
- usb_dev->bus->busnum, usb_dev->devnum))
- return -ENOMEM;
-#endif
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "PRODUCT=%x/%x/%x",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice)))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "TYPE=%d/%d/%d",
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
+ if (add_uevent_var(env, "INTERFACE=%d/%d/%d",
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
alt->desc.bInterfaceProtocol))
return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ if (add_uevent_var(env,
+ "MODALIAS=usb:"
+ "v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct),
le16_to_cpu(usb_dev->descriptor.bcdDevice),
alt->desc.bInterfaceProtocol))
return -ENOMEM;
- envp[i] = NULL;
return 0;
}
#else
-static int usb_if_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return -ENODEV;
}
};
static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
- struct usb_host_config *config,
- u8 inum)
+ struct usb_host_config *config,
+ u8 inum)
{
struct usb_interface_assoc_descriptor *retval = NULL;
struct usb_interface_assoc_descriptor *intf_assoc;
/*
+ * Internal function to queue a device reset
+ *
+ * This is initialized into the workstruct in 'struct
+ * usb_device->reset_ws' that is launched by
+ * message.c:usb_set_configuration() when initializing each 'struct
+ * usb_interface'.
+ *
+ * It is safe to get the USB device without reference counts because
+ * the life cycle of @iface is bound to the life cycle of @udev. Then,
+ * this function will be ran only if @iface is alive (and before
+ * freeing it any scheduled instances of it will have been cancelled).
+ *
+ * We need to set a flag (usb_dev->reset_running) because when we call
+ * the reset, the interfaces might be unbound. The current interface
+ * cannot try to remove the queued work as it would cause a deadlock
+ * (you cannot remove your work from within your executing
+ * workqueue). This flag lets it know, so that
+ * usb_cancel_queued_reset() doesn't try to do it.
+ *
+ * See usb_queue_reset_device() for more details
+ */
+static void __usb_queue_reset_device(struct work_struct *ws)
+{
+ int rc;
+ struct usb_interface *iface =
+ container_of(ws, struct usb_interface, reset_ws);
+ struct usb_device *udev = interface_to_usbdev(iface);
+
+ rc = usb_lock_device_for_reset(udev, iface);
+ if (rc >= 0) {
+ iface->reset_running = 1;
+ usb_reset_device(udev);
+ iface->reset_running = 0;
+ usb_unlock_device(udev);
+ }
+}
+
+
+/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
* @configuration: the configuration being chosen.
* channels are available independently; and choosing between open
* standard device protocols (like CDC) or proprietary ones.
*
+ * Note that a non-authorized device (dev->authorized == 0) will only
+ * be put in unconfigured mode.
+ *
* Note that USB has an additional level of device configurability,
* associated with interfaces. That configurability is accessed using
* usb_set_interface().
*
* This call is synchronous. The calling context must be able to sleep,
* must own the device lock, and must not hold the driver model's USB
- * bus mutex; usb device driver probe() methods cannot use this routine.
+ * bus mutex; usb interface driver probe() methods cannot use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying call that failed. On successful completion, each interface
int i, ret;
struct usb_host_config *cp = NULL;
struct usb_interface **new_interfaces = NULL;
+ struct usb_hcd *hcd = bus_to_hcd(dev->bus);
int n, nintf;
- if (configuration == -1)
+ if (dev->authorized == 0 || configuration == -1)
configuration = 0;
else {
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces) {
- dev_err(&dev->dev, "Out of memory");
+ dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
}
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces[n]) {
- dev_err(&dev->dev, "Out of memory");
+ dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
free_interfaces:
while (--n >= 0)
if (ret)
goto free_interfaces;
+ /* Make sure we have bandwidth (and available HCD resources) for this
+ * configuration. Remove endpoints from the schedule if we're dropping
+ * this configuration to set configuration 0. After this point, the
+ * host controller will not allow submissions to dropped endpoints. If
+ * this call fails, the device state is unchanged.
+ */
+ mutex_lock(&hcd->bandwidth_mutex);
+ ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
+ if (ret < 0) {
+ usb_autosuspend_device(dev);
+ mutex_unlock(&hcd->bandwidth_mutex);
+ goto free_interfaces;
+ }
+
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
if (dev->state != USB_STATE_ADDRESS)
- usb_disable_device (dev, 1); // Skip ep0
+ usb_disable_device(dev, 1); /* Skip ep0 */
- if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) {
+ /* Get rid of pending async Set-Config requests for this device */
+ cancel_async_set_config(dev);
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0) {
/* All the old state is gone, so what else can we do?
* The device is probably useless now anyway.
*/
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
+ usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
usb_autosuspend_device(dev);
+ mutex_unlock(&hcd->bandwidth_mutex);
goto free_interfaces;
}
+ mutex_unlock(&hcd->bandwidth_mutex);
usb_set_device_state(dev, USB_STATE_CONFIGURED);
/* Initialize the new interface structures and the
alt = &intf->altsetting[0];
intf->cur_altsetting = alt;
- usb_enable_interface(dev, intf);
+ usb_enable_interface(dev, intf, true);
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
intf->dev.type = &usb_if_device_type;
+ intf->dev.groups = usb_interface_groups;
intf->dev.dma_mask = dev->dev.dma_mask;
- device_initialize (&intf->dev);
- mark_quiesced(intf);
- sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
- dev->bus->busnum, dev->devpath,
- configuration, alt->desc.bInterfaceNumber);
+ INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
+ device_initialize(&intf->dev);
+ dev_set_name(&intf->dev, "%d-%s:%d.%d",
+ dev->bus->busnum, dev->devpath,
+ configuration, alt->desc.bInterfaceNumber);
}
kfree(new_interfaces);
- if (cp->string == NULL)
+ if (cp->string == NULL &&
+ !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
/* Now that all the interfaces are set up, register them
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
- dev_dbg (&dev->dev,
+ dev_dbg(&dev->dev,
"adding %s (config #%d, interface %d)\n",
- intf->dev.bus_id, configuration,
+ dev_name(&intf->dev), configuration,
intf->cur_altsetting->desc.bInterfaceNumber);
- ret = device_add (&intf->dev);
+ device_enable_async_suspend(&intf->dev);
+ ret = device_add(&intf->dev);
if (ret != 0) {
dev_err(&dev->dev, "device_add(%s) --> %d\n",
- intf->dev.bus_id, ret);
+ dev_name(&intf->dev), ret);
continue;
}
- usb_create_sysfs_intf_files (intf);
+ create_intf_ep_devs(intf);
}
usb_autosuspend_device(dev);
return 0;
}
+static LIST_HEAD(set_config_list);
+static DEFINE_SPINLOCK(set_config_lock);
+
struct set_config_request {
struct usb_device *udev;
int config;
struct work_struct work;
+ struct list_head node;
};
/* Worker routine for usb_driver_set_configuration() */
{
struct set_config_request *req =
container_of(work, struct set_config_request, work);
+ struct usb_device *udev = req->udev;
+
+ usb_lock_device(udev);
+ spin_lock(&set_config_lock);
+ list_del(&req->node);
+ spin_unlock(&set_config_lock);
- usb_lock_device(req->udev);
- usb_set_configuration(req->udev, req->config);
- usb_unlock_device(req->udev);
- usb_put_dev(req->udev);
+ if (req->config >= -1) /* Is req still valid? */
+ usb_set_configuration(udev, req->config);
+ usb_unlock_device(udev);
+ usb_put_dev(udev);
kfree(req);
}
+/* Cancel pending Set-Config requests for a device whose configuration
+ * was just changed
+ */
+static void cancel_async_set_config(struct usb_device *udev)
+{
+ struct set_config_request *req;
+
+ spin_lock(&set_config_lock);
+ list_for_each_entry(req, &set_config_list, node) {
+ if (req->udev == udev)
+ req->config = -999; /* Mark as cancelled */
+ }
+ spin_unlock(&set_config_lock);
+}
+
/**
* usb_driver_set_configuration - Provide a way for drivers to change device configurations
* @udev: the device whose configuration is being updated
* routine gets around the normal restrictions by using a work thread to
* submit the change-config request.
*
- * Returns 0 if the request was succesfully queued, error code otherwise.
+ * Returns 0 if the request was successfully queued, error code otherwise.
* The caller has no way to know whether the queued request will eventually
* succeed.
*/
req->config = config;
INIT_WORK(&req->work, driver_set_config_work);
+ spin_lock(&set_config_lock);
+ list_add(&req->node, &set_config_list);
+ spin_unlock(&set_config_lock);
+
usb_get_dev(udev);
schedule_work(&req->work);
return 0;
}
EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
-
-// synchronous request completion model
-EXPORT_SYMBOL(usb_control_msg);
-EXPORT_SYMBOL(usb_bulk_msg);
-
-EXPORT_SYMBOL(usb_sg_init);
-EXPORT_SYMBOL(usb_sg_cancel);
-EXPORT_SYMBOL(usb_sg_wait);
-
-// synchronous control message convenience routines
-EXPORT_SYMBOL(usb_get_descriptor);
-EXPORT_SYMBOL(usb_get_status);
-EXPORT_SYMBOL(usb_string);
-
-// synchronous calls that also maintain usbcore state
-EXPORT_SYMBOL(usb_clear_halt);
-EXPORT_SYMBOL(usb_reset_configuration);
-EXPORT_SYMBOL(usb_set_interface);
-