{
const struct spi_device *spi = to_spi_device(dev);
- return snprintf(buf, BUS_ID_SIZE + 1, "%s\n", spi->modalias);
+ return sprintf(buf, "%s\n", spi->modalias);
}
static struct device_attribute spi_dev_attrs[] = {
{
const struct spi_device *spi = to_spi_device(dev);
- return strncmp(spi->modalias, drv->name, BUS_ID_SIZE) == 0;
+ return strcmp(spi->modalias, drv->name) == 0;
}
static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
}
/* Set the bus ID string */
- snprintf(spi->dev.bus_id, sizeof spi->dev.bus_id,
- "%s.%u", spi->master->dev.bus_id,
+ dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
spi->chip_select);
*/
mutex_lock(&spi_add_lock);
- if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+ if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev))
!= NULL) {
dev_err(dev, "chipselect %d already in use\n",
spi->chip_select);
* normally rely on the device being setup. Devices
* using SPI_CS_HIGH can't coexist well otherwise...
*/
- status = spi->master->setup(spi);
+ status = spi_setup(spi);
if (status < 0) {
dev_err(dev, "can't %s %s, status %d\n",
- "setup", spi->dev.bus_id, status);
+ "setup", dev_name(&spi->dev), status);
goto done;
}
status = device_add(&spi->dev);
if (status < 0)
dev_err(dev, "can't %s %s, status %d\n",
- "add", spi->dev.bus_id, status);
+ "add", dev_name(&spi->dev), status);
else
- dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
+ dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
done:
mutex_unlock(&spi_add_lock);
/* register the device, then userspace will see it.
* registration fails if the bus ID is in use.
*/
- snprintf(master->dev.bus_id, sizeof master->dev.bus_id,
- "spi%u", master->bus_num);
+ dev_set_name(&master->dev, "spi%u", master->bus_num);
status = device_add(&master->dev);
if (status < 0)
goto done;
- dev_dbg(dev, "registered master %s%s\n", master->dev.bus_id,
+ dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
dynamic ? " (dynamic)" : "");
/* populate children from any spi device tables */
/*-------------------------------------------------------------------------*/
+/* Core methods for SPI master protocol drivers. Some of the
+ * other core methods are currently defined as inline functions.
+ */
+
+/**
+ * spi_setup - setup SPI mode and clock rate
+ * @spi: the device whose settings are being modified
+ * Context: can sleep, and no requests are queued to the device
+ *
+ * SPI protocol drivers may need to update the transfer mode if the
+ * device doesn't work with its default. They may likewise need
+ * to update clock rates or word sizes from initial values. This function
+ * changes those settings, and must be called from a context that can sleep.
+ * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
+ * effect the next time the device is selected and data is transferred to
+ * or from it. When this function returns, the spi device is deselected.
+ *
+ * Note that this call will fail if the protocol driver specifies an option
+ * that the underlying controller or its driver does not support. For
+ * example, not all hardware supports wire transfers using nine bit words,
+ * LSB-first wire encoding, or active-high chipselects.
+ */
+int spi_setup(struct spi_device *spi)
+{
+ unsigned bad_bits;
+ int status;
+
+ /* help drivers fail *cleanly* when they need options
+ * that aren't supported with their current master
+ */
+ bad_bits = spi->mode & ~spi->master->mode_bits;
+ if (bad_bits) {
+ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+ bad_bits);
+ return -EINVAL;
+ }
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ status = spi->master->setup(spi);
+
+ dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s"
+ "%u bits/w, %u Hz max --> %d\n",
+ (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
+ (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
+ (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
+ (spi->mode & SPI_3WIRE) ? "3wire, " : "",
+ (spi->mode & SPI_LOOP) ? "loopback, " : "",
+ spi->bits_per_word, spi->max_speed_hz,
+ status);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(spi_setup);
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Utility methods for SPI master protocol drivers, layered on
+ * top of the core. Some other utility methods are defined as
+ * inline functions.
+ */
+
static void spi_complete(void *arg)
{
complete(arg);
* @spi: device with which data will be exchanged
* @txbuf: data to be written (need not be dma-safe)
* @n_tx: size of txbuf, in bytes
- * @rxbuf: buffer into which data will be read
- * @n_rx: size of rxbuf, in bytes (need not be dma-safe)
+ * @rxbuf: buffer into which data will be read (need not be dma-safe)
+ * @n_rx: size of rxbuf, in bytes
* Context: can sleep
*
* This performs a half duplex MicroWire style transaction with the
int status;
struct spi_message message;
- struct spi_transfer x;
+ struct spi_transfer x[2];
u8 *local_buf;
/* Use preallocated DMA-safe buffer. We can't avoid copying here,
return -EINVAL;
spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = n_tx + n_rx;
- spi_message_add_tail(&x, &message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+ x[1].len = n_rx;
+ spi_message_add_tail(&x[1], &message);
+ }
/* ... unless someone else is using the pre-allocated buffer */
if (!mutex_trylock(&lock)) {
local_buf = buf;
memcpy(local_buf, txbuf, n_tx);
- x.tx_buf = local_buf;
- x.rx_buf = local_buf;
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
/* do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
- memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
- if (x.tx_buf == buf)
+ if (x[0].tx_buf == buf)
mutex_unlock(&lock);
else
kfree(local_buf);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff