*/
#include <linux/linkage.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
#include <asm/kexec.h>
#include <asm/processor-flags.h>
-#include <asm/pgtable.h>
/*
* Must be relocatable PIC code callable as a C function
*/
#define PTR(x) (x << 2)
-#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define PAE_PGD_ATTR (_PAGE_PRESENT)
-/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
* ~ control_page + PAGE_SIZE are used as data storage and stack for
* jumping back
*/
#define CP_PA_BACKUP_PAGES_MAP DATA(0x1c)
.text
- .align PAGE_SIZE
.globl relocate_kernel
relocate_kernel:
/* Save the CPU context, used for jumping back */
movl %cr4, %eax
movl %eax, CR4(%edi)
-#ifdef CONFIG_X86_PAE
- /* map the control page at its virtual address */
-
- movl PTR(VA_PGD)(%ebp), %edi
- movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
- andl $0xc0000000, %eax
- shrl $27, %eax
- addl %edi, %eax
-
- movl PTR(PA_PMD_0)(%ebp), %edx
- orl $PAE_PGD_ATTR, %edx
- movl %edx, (%eax)
-
- movl PTR(VA_PMD_0)(%ebp), %edi
- movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
- andl $0x3fe00000, %eax
- shrl $18, %eax
- addl %edi, %eax
-
- movl PTR(PA_PTE_0)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-
- movl PTR(VA_PTE_0)(%ebp), %edi
- movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
- andl $0x001ff000, %eax
- shrl $9, %eax
- addl %edi, %eax
-
- movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-
- /* identity map the control page at its physical address */
-
- movl PTR(VA_PGD)(%ebp), %edi
- movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
- andl $0xc0000000, %eax
- shrl $27, %eax
- addl %edi, %eax
-
- movl PTR(PA_PMD_1)(%ebp), %edx
- orl $PAE_PGD_ATTR, %edx
- movl %edx, (%eax)
-
- movl PTR(VA_PMD_1)(%ebp), %edi
- movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
- andl $0x3fe00000, %eax
- shrl $18, %eax
- addl %edi, %eax
-
- movl PTR(PA_PTE_1)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-
- movl PTR(VA_PTE_1)(%ebp), %edi
- movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
- andl $0x001ff000, %eax
- shrl $9, %eax
- addl %edi, %eax
-
- movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-#else
- /* map the control page at its virtual address */
-
- movl PTR(VA_PGD)(%ebp), %edi
- movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
- andl $0xffc00000, %eax
- shrl $20, %eax
- addl %edi, %eax
-
- movl PTR(PA_PTE_0)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-
- movl PTR(VA_PTE_0)(%ebp), %edi
- movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
- andl $0x003ff000, %eax
- shrl $10, %eax
- addl %edi, %eax
-
- movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-
- /* identity map the control page at its physical address */
-
- movl PTR(VA_PGD)(%ebp), %edi
- movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
- andl $0xffc00000, %eax
- shrl $20, %eax
- addl %edi, %eax
-
- movl PTR(PA_PTE_1)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-
- movl PTR(VA_PTE_1)(%ebp), %edi
- movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
- andl $0x003ff000, %eax
- shrl $10, %eax
- addl %edi, %eax
-
- movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
- orl $PAGE_ATTR, %edx
- movl %edx, (%eax)
-#endif
-
-relocate_new_kernel:
/* read the arguments and say goodbye to the stack */
movl 20+4(%esp), %ebx /* page_list */
movl 20+8(%esp), %ebp /* list of pages */
movl %eax, CP_PA_SWAP_PAGE(%edi)
movl %ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
- /* get physical address of control page now */
- /* this is impossible after page table switch */
+ /*
+ * get physical address of control page now
+ * this is impossible after page table switch
+ */
movl PTR(PA_CONTROL_PAGE)(%ebp), %edi
/* switch to new set of page tables */
/* store the start address on the stack */
pushl %edx
- /* Set cr0 to a known state:
+ /*
+ * Set cr0 to a known state:
* - Paging disabled
* - Alignment check disabled
* - Write protect disabled
/* clear cr4 if applicable */
testl %ecx, %ecx
jz 1f
- /* Set cr4 to a known state:
+ /*
+ * Set cr4 to a known state:
* Setting everything to zero seems safe.
*/
xorl %eax, %eax
call swap_pages
addl $8, %esp
- /* To be certain of avoiding problems with self-modifying code
+ /*
+ * To be certain of avoiding problems with self-modifying code
* I need to execute a serializing instruction here.
* So I flush the TLB, it's handy, and not processor dependent.
*/
xorl %eax, %eax
movl %eax, %cr3
- /* set all of the registers to known values */
- /* leave %esp alone */
+ /*
+ * set all of the registers to known values
+ * leave %esp alone
+ */
testl %esi, %esi
jnz 1f