----
This document was contributed by Cirrus Logic for kernel 2.2.5. This version
-has been updated for 2.3.48 by Andrew Morton <andrewm@uow.edu.au>
+has been updated for 2.3.48 by Andrew Morton.
Cirrus make a copy of this driver available at their website, as
described below. In general, you should use the driver version which
with device probing. To avoid this behaviour, add one
to the `io=' module parameter. This doesn't actually change
the I/O address, but it is a flag to tell the driver
- topartially initialise the hardware before trying to
+ to partially initialise the hardware before trying to
identify the card. This could be dangerous if you are
not sure that there is a cs89x0 card at the provided address.
1.) The system does not boot properly (or at all).
- 2.) The driver can not communicate with the adapter, reporting an "Adapter
+ 2.) The driver cannot communicate with the adapter, reporting an "Adapter
not found" error message.
3.) You cannot connect to the network or the driver will not load.
12 Mouse (PS/2)
Memory Address Device 13 Math Coprocessor
-------------- --------------------- 14 Hard Disk controller
-A000-BFFF EGA Graphics Adpater
-A000-C7FF VGA Graphics Adpater
+A000-BFFF EGA Graphics Adapter
+A000-C7FF VGA Graphics Adapter
B000-BFFF Mono Graphics Adapter
B800-BFFF Color Graphics Adapter
E000-FFFF AT BIOS
software-update notification.
Cirrus Logic maintains a web page at http://www.cirrus.com with the
-the latest drivers and technical publications.
+latest drivers and technical publications.
6.4 Current maintainer
In February 2000 the maintenance of this driver was assumed by Andrew
-Morton <akpm@zip.com.au>
+Morton.
6.5 Kernel module parameters