safe/jmp/linux-2.6
2010-05-11 Luis R. Rodriguezath9k_hw: new initialization values for AR9003
2010-05-11 Luis R. Rodriguezath5k: drop warning on jumbo frames
2010-05-11 Dan Carpenterwl1271: remove some unneeded code
2010-05-11 Dan Carpenterwl1271: fix notifier interface supported test
2010-05-11 Dan Carpenterwl1271: add missing spin_lock()
2010-05-10 Johannes Bergiwlwifi: clear driver stations when going down
2010-05-10 Johannes Bergiwlwifi: remove pointless HT check
2010-05-10 Johannes Bergiwlwifi: rename iwl_add_local_station
2010-05-10 Johannes Bergiwlwifi: move iwl_find_station() to 4965
2010-05-10 Johannes Bergiwlwifi: use iwl_sta_id() for TKIP key update
2010-05-10 Johannes Bergiwlagn: use iwl_sta_id() for aggregation
2010-05-10 Johannes Bergiwlwifi: use iwl_find_station less
2010-05-10 Johannes Bergiwlwifi: add iwl_sta_id()
2010-05-10 Johannes Bergiwlwifi: track station IDs
2010-05-10 Wey-Yi Guyiwlwifi: provide more comments for cfg structure
2010-05-10 Wey-Yi Guyiwlwifi: "tx power per chain" are part of ucode_tx_stats
2010-05-10 Reinette Chatreiwlagn: work around rate scaling reset delay
2010-05-10 Johannes Bergiwlwifi: rework broadcast station management
2010-05-10 Johannes Bergiwlwifi: split allocation/sending local station LQ
2010-05-10 Johannes Bergiwlwifi: fix iwl_sta_init_lq station ID
2010-05-10 Johannes Bergiwlwifi: note that priv->bssid is used only by 3945
2010-05-10 Johannes Bergiwlwifi: use vif in iwl_ht_conf
2010-05-10 Johannes Bergiwlwifi: remove useless priv->vif check
2010-05-10 Johannes Bergiwlagn: use virtual interface in TX aggregation handling
2010-05-10 Johannes Bergiwlwifi: push virtual interface through
2010-05-10 Johannes Bergiwlwifi: apply filter flags directly
2010-05-10 Johannes Bergiwlagn: use vif->type to check station
2010-05-10 Johannes Bergiwlagn: move iwl_get_ra_sta_id to 4965
2010-05-10 Johannes Bergiwlwifi: remove rts_threshold
2010-05-10 Abhijeet Kolekariwl3945: add plcp error checking
2010-05-10 Johannes Bergiwlagn: implement loading a new firmware file type
2010-05-10 Johannes Bergiwlagn: prepare for new firmware file format
2010-05-10 Johannes Bergiwlwifi: move eeprom version printout to eeprom init
2010-05-10 Johannes Bergiwlwifi: remove ucode virtual functions
2010-05-10 Johannes Bergiwl3945: remove ucode access indirection
2010-05-10 Johannes Bergiwlagn: show and store firmware build number
2010-05-10 Johannes Bergiwlwifi: manage IBSS station properly
2010-05-10 Johannes Bergiwlwifi: pass address to iwl_remove_station
2010-05-10 Johannes Bergiwl3945: use iwl3945_add_bcast_station
2010-05-10 Reinette Chatreiwlwifi: make bcast LQ command available for later...
2010-05-10 Shanyu Zhaoiwlwifi: dump firmware build info in error case
2010-05-10 Wey-Yi Guyiwlwifi: checking for all the possible failure cases
2010-05-10 Wey-Yi Guyiwlwifi: wimax co-exist code clean up
2010-05-10 Wey-Yi Guyiwlwifi: give correct return information for tx power...
2010-05-10 Wey-Yi Guyiwlwifi: use cfg to configure calibration operation
2010-05-10 Wey-Yi Guyiwlwifi: use .cfg to enable/disable continuous ucode...
2010-05-10 Wey-Yi Guyiwlwifi: remove device type checking for tx power in...
2010-05-10 Johannes Bergiwlwifi: use vif iwl_bss_info_changed
2010-05-10 Wey-Yi Guyiwlwifi: rename "tx_power" to "chain_tx_power"
2010-05-10 Wey-Yi Guyiwlwifi: remove powersave debugfs if it is not supported
2010-05-10 Abhijeet Kolekariwl3945: fix scan races
2010-05-10 Shanyu Zhaoiwlwifi: rename 6000 series Gen2 devices to Gen2a
2010-05-10 Reinette ChatreMerge branch 'wireless-2.6' into wireless-next-2.6
2010-05-10 Johannes Bergiwlagn: wait for asynchronous firmware loading
2010-05-10 Randy Dunlapwireless: depends on NET
2010-05-10 Xose Vazquez... wireless: rt2x00: rt2800usb: replace X by x
2010-05-10 Gertjan van... rt2x00: Clean up generic procedures on descriptor writing.
2010-05-10 Gertjan van... rt2x00: Fix beaconing on rt2800.
2010-05-10 Gertjan van... rt2x00: provide beacon's txdesc to write_beacon callbac...
2010-05-10 Gertjan van... rt2x00: Clean up all driver's kick_tx_queue callback...
2010-05-10 Gertjan van... rt2x00: Factor out RXWI processing to common rt2800...
2010-05-10 Gertjan van... rt2x00: Factor out TXWI writing to common rt2800 code.
2010-05-10 Gertjan van... rt2x00: Don't check whether hardware crypto is enabled...
2010-05-10 Gertjan van... rt2x00: Clean up rt2800usb.h.
2010-05-10 Gertjan van... rt2x00: Fix setting of txdesc->length field.
2010-05-10 Dan Carpenterath5k: several off by one range checks
2010-05-10 Dan Carpenterath9k/htc_drv_main: off by one error
2010-05-10 Dan Carpenterath9k/htc_drv_main: null dereference typo
2010-05-10 Dan Carpenteriwlwifi: remove stray mutex_unlock()
2010-05-10 Luis R. Rodriguezath9k_hw: enable PCIe low power mode for AR9003
2010-05-10 John W. Linvillertl8180: change PCI DMA mask to DMA_BIT_MASK(32)
2010-05-07 Helmut Schaart2x00: rt2800: use correct txop value in tx descriptor
2010-05-07 Juuso Oikarinenwl1271: Reduce PSM entry hang over period from 128...
2010-05-07 Teemu Paasikiviwl1271: Increase timeout for command event waiting
2010-05-07 Juuso Oikarinenwl1271: Fix to join and channel number handling
2010-05-07 Juuso Oikarinenwl1271: Fix 32 bit register read related endiannes bug
2010-05-07 Juuso Oikarinenwl1271: Add sysfs file to retrieve HW PG-version and...
2010-05-07 Sujithath9k_htc: Handle IDLE LED properly
2010-05-07 Luis R. Rodriguezath9k_hw: Update initvals for AR9003 for xb113
2010-05-07 Luis R. Rodriguezath9k_common: drop incomming frames with an invalid...
2010-05-07 Luis R. Rodriguezath9k_common: move the rate status setting into ath9k_p...
2010-05-07 John W. Linvillertl8180: add software-based support for IBSS mode
2010-05-07 John W. Linvillertl8180: assign sequence numbers in the driver
2010-05-07 John W. Linvillemac80211: set IEEE80211_TX_CTL_FIRST_FRAGMENT for beacons
2010-05-07 Ivo van Doornrt2x00: Fix RF3052 channel initialization
2010-05-07 Helmut Schaart2x00: rt2800: don't overwrite SIFS values on erp...
2010-05-07 Helmut Schaart2x00: rt2800: update initial SIFS values
2010-05-07 Sujithath9k_htc: Fix beaconing in IBSS mode
2010-05-07 Johannes Bergmac80211: improve HT channel handling
2010-05-07 Johannes Bergcfg80211/mac80211: better channel handling
2010-05-07 Johannes Bergmac80211: fix BSS info reconfiguration
2010-05-07 David Kilroyorinoco: refactor xmit path
2010-05-07 Felix Fietkauath9k: fix another source of corrupt frames
2010-05-07 Christian Lamparterar9170usb: remove deprecated aggregation code
2010-05-07 Reinette Chatremac80211: remove association work when processing deaut...
2010-05-07 Christian Lamparterar9170: wait for asynchronous firmware loading
2010-05-05 Johannes Bergmac80211: use fixed channel in ibss join when appropriate
2010-05-05 John W. Linvillertl8187: use SET_IEEE80211_PERM_ADDR
2010-05-04 John W. Linvillertl8180: use SET_IEEE80211_PERM_ADDR
2010-05-04 Gertjan van... rt2x00: Register frame length in TX entry descriptor...
next