From e5e2a8fd8358d1b3a2c51c3248edee72e4194703 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 13 Aug 2009 04:11:52 +0000 Subject: [PATCH] bonding: wipe out printk's I did not introduce new lines over 80 chars. I even eliminated some of them. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 96 +++++++++++++++++++++------------------- drivers/net/bonding/bond_alb.c | 26 ++++++----- drivers/net/bonding/bond_ipv6.c | 4 +- drivers/net/bonding/bond_main.c | 6 +-- drivers/net/bonding/bond_sysfs.c | 63 +++++++++++++------------- 5 files changed, 102 insertions(+), 93 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index be799d2..cea5cfe 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1124,7 +1124,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) // detect loopback situation if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) { // INFO_RECEIVED_LOOPBACK_FRAMES - printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on " + pr_err(DRV_NAME ": %s: An illegal loopback occurred on " "adapter (%s). Check the configuration to verify that all " "Adapters are connected to 802.3ad compliant switch ports\n", port->slave->dev->master->name, port->slave->dev->name); @@ -1306,11 +1306,13 @@ static void ad_port_selection_logic(struct port *port) } } if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list - printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was " - "related to aggregator %d but was not on its port list\n", - port->slave->dev->master->name, - port->actor_port_number, port->slave->dev->name, - port->aggregator->aggregator_identifier); + pr_warning(DRV_NAME ": %s: Warning: Port %d (on %s) " + "was related to aggregator %d but was not " + "on its port list\n", + port->slave->dev->master->name, + port->actor_port_number, + port->slave->dev->name, + port->aggregator->aggregator_identifier); } } // search on all aggregators for a suitable aggregator for this port @@ -1379,7 +1381,8 @@ static void ad_port_selection_logic(struct port *port) pr_debug("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); } else { - printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n", + pr_err(DRV_NAME ": %s: Port %d (on %s) did not find " + "a suitable aggregator\n", port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name); } @@ -1456,10 +1459,10 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, break; default: - printk(KERN_WARNING DRV_NAME - ": %s: Impossible agg select mode %d\n", - curr->slave->dev->master->name, - __get_agg_selection_mode(curr->lag_ports)); + pr_warning(DRV_NAME + ": %s: Impossible agg select mode %d\n", + curr->slave->dev->master->name, + __get_agg_selection_mode(curr->lag_ports)); break; } @@ -1562,7 +1565,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) // check if any partner replys if (best->is_individual) { - printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad" + pr_warning(DRV_NAME ": %s: Warning: No 802.3ad" " response from the link partner for any" " adapters in the bond\n", best->slave->dev->master->name); @@ -1885,7 +1888,8 @@ int bond_3ad_bind_slave(struct slave *slave) struct aggregator *aggregator; if (bond == NULL) { - printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n", + pr_err(DRV_NAME ": %s: The slave %s is not attached to " + "its bond\n", slave->dev->master->name, slave->dev->name); return -1; } @@ -1961,9 +1965,9 @@ void bond_3ad_unbind_slave(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to " - "unbind an uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + pr_warning(DRV_NAME ": Warning: %s: Trying to " + "unbind an uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -1994,8 +1998,8 @@ void bond_3ad_unbind_slave(struct slave *slave) pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier); if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { - printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", - aggregator->slave->dev->master->name); + pr_info(DRV_NAME ": %s: Removing an active aggregator\n", + aggregator->slave->dev->master->name); // select new active aggregator select_new_active_agg = 1; } @@ -2025,17 +2029,17 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_agg_selection_logic(__get_first_agg(port)); } } else { - printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, " - "and could not find a new aggregator for its ports\n", - slave->dev->master->name); + pr_warning(DRV_NAME ": %s: Warning: unbinding aggregator, " + "and could not find a new aggregator for its ports\n", + slave->dev->master->name); } } else { // in case that the only port related to this aggregator is the one we want to remove select_new_active_agg = aggregator->is_active; // clear the aggregator ad_clear_agg(aggregator); if (select_new_active_agg) { - printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", - slave->dev->master->name); + pr_info(DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2061,8 +2065,8 @@ void bond_3ad_unbind_slave(struct slave *slave) // clear the aggregator ad_clear_agg(temp_aggregator); if (select_new_active_agg) { - printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", - slave->dev->master->name); + pr_info(DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2110,8 +2114,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work) // select the active aggregator for the bond if ((port = __get_first_port(bond))) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is " - "uninitialized\n", bond->dev->name); + pr_warning(DRV_NAME ": %s: Warning: bond's first port is " + "uninitialized\n", bond->dev->name); goto re_arm; } @@ -2124,8 +2128,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work) // for each port run the state machines for (port = __get_first_port(bond); port; port = __get_next_port(port)) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized " - "port\n", bond->dev->name); + pr_warning(DRV_NAME ": %s: Warning: Found an uninitialized " + "port\n", bond->dev->name); goto re_arm; } @@ -2166,8 +2170,9 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u port = &(SLAVE_AD_INFO(slave).port); if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is " - "uninitialized\n", slave->dev->name, slave->dev->master->name); + pr_warning(DRV_NAME ": %s: Warning: port of slave %s " + "is uninitialized\n", + slave->dev->name, slave->dev->master->name); return; } @@ -2212,9 +2217,9 @@ void bond_3ad_adapter_speed_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: %s: speed " - "changed for uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + pr_warning(DRV_NAME ": Warning: %s: speed " + "changed for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2240,9 +2245,9 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed " - "for uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + pr_warning(DRV_NAME ": %s: Warning: duplex changed " + "for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2269,9 +2274,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for " - "uninitialized port on %s\n", - slave->dev->master->name, slave->dev->name); + pr_warning(DRV_NAME ": Warning: %s: link status changed for " + "uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2375,8 +2380,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (bond_3ad_get_active_agg_info(bond, &ad_info)) { - printk(KERN_DEBUG DRV_NAME ": %s: Error: " - "bond_3ad_get_active_agg_info failed\n", dev->name); + pr_debug(DRV_NAME ": %s: Error: " + "bond_3ad_get_active_agg_info failed\n", dev->name); goto out; } @@ -2385,9 +2390,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) if (slaves_in_agg == 0) { /*the aggregator is empty*/ - printk(KERN_DEBUG DRV_NAME ": %s: Error: active " - "aggregator is empty\n", - dev->name); + pr_debug(DRV_NAME ": %s: Error: active aggregator is empty\n", + dev->name); goto out; } @@ -2405,7 +2409,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (slave_agg_no >= 0) { - printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on " + pr_err(DRV_NAME ": %s: Error: Couldn't find a slave to tx on " "for aggregator ID %d\n", dev->name, agg_id); goto out; } diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index bf45d20..2108706 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -194,7 +194,7 @@ static int tlb_initialize(struct bonding *bond) new_hashtbl = kzalloc(size, GFP_KERNEL); if (!new_hashtbl) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: Failed to allocate TLB hash table\n", bond->dev->name); return -1; @@ -510,7 +510,7 @@ static void rlb_update_client(struct rlb_client_info *client_info) client_info->slave->dev->dev_addr, client_info->mac_dst); if (!skb) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: failed to create an ARP packet\n", client_info->slave->dev->master->name); continue; @@ -521,7 +521,7 @@ static void rlb_update_client(struct rlb_client_info *client_info) if (client_info->tag) { skb = vlan_put_tag(skb, client_info->vlan_id); if (!skb) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: failed to insert VLAN tag\n", client_info->slave->dev->master->name); continue; @@ -605,7 +605,7 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, __be32 src_ip) client_info = &(bond_info->rx_hashtbl[hash_index]); if (!client_info->slave) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: found a client with no channel in " "the client's hash table\n", bond->dev->name); @@ -802,7 +802,7 @@ static int rlb_initialize(struct bonding *bond) new_hashtbl = kmalloc(size, GFP_KERNEL); if (!new_hashtbl) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: Failed to allocate RLB hash table\n", bond->dev->name); return -1; @@ -924,7 +924,7 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) skb = vlan_put_tag(skb, vlan->vlan_id); if (!skb) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: failed to insert VLAN tag\n", bond->dev->name); continue; @@ -954,7 +954,7 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw) memcpy(s_addr.sa_data, addr, dev->addr_len); s_addr.sa_family = dev->type; if (dev_set_mac_address(dev, &s_addr)) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: dev_set_mac_address of dev %s failed! ALB " "mode requires that the base driver support setting " "the hw address also when the network device's " @@ -1170,13 +1170,15 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr, bond->alb_info.rlb_enabled); - printk(KERN_WARNING DRV_NAME - ": %s: Warning: the hw address of slave %s is in use by " - "the bond; giving it the hw address of %s\n", - bond->dev->name, slave->dev->name, free_mac_slave->dev->name); + pr_warning(DRV_NAME + ": %s: Warning: the hw address of slave %s is " + "in use by the bond; giving it the hw address " + "of %s\n", + bond->dev->name, slave->dev->name, + free_mac_slave->dev->name); } else if (has_bond_addr) { - printk(KERN_ERR DRV_NAME + pr_err(DRV_NAME ": %s: Error: the hw address of slave %s is in use by the " "bond; couldn't find a slave with a free hw address to " "give it (this should not have happened)\n", diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c index 0d73bf5..83921ab 100644 --- a/drivers/net/bonding/bond_ipv6.c +++ b/drivers/net/bonding/bond_ipv6.c @@ -79,14 +79,14 @@ static void bond_na_send(struct net_device *slave_dev, ND_OPT_TARGET_LL_ADDR); if (!skb) { - printk(KERN_ERR DRV_NAME ": NA packet allocation failed\n"); + pr_err(DRV_NAME ": NA packet allocation failed\n"); return; } if (vlan_id) { skb = vlan_put_tag(skb, vlan_id); if (!skb) { - printk(KERN_ERR DRV_NAME ": failed to insert VLAN tag\n"); + pr_err(DRV_NAME ": failed to insert VLAN tag\n"); return; } } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3bf0cc6..4798d30 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4837,7 +4837,7 @@ static int bond_check_params(struct bond_params *params) } if (bond_mode == BOND_MODE_ALB) { - printk(KERN_NOTICE DRV_NAME + pr_notice(DRV_NAME ": In ALB mode you might experience client " "disconnections upon reconnection of a link if the " "bonding module updelay parameter (%d msec) is " @@ -4961,9 +4961,9 @@ static int bond_check_params(struct bond_params *params) arp_ip_count); for (i = 0; i < arp_ip_count; i++) - printk(" %s", arp_ip_target[i]); + pr_info(" %s", arp_ip_target[i]); - printk("\n"); + pr_info("\n"); } else if (max_bonds) { /* miimon and arp_interval not set, we need one so things diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 55bf34f..6044e12 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -218,9 +218,8 @@ static ssize_t bonding_store_slaves(struct device *d, /* Quick sanity check -- is the bond interface up? */ if (!(bond->dev->flags & IFF_UP)) { - printk(KERN_WARNING DRV_NAME - ": %s: doing slave updates when interface is down.\n", - bond->dev->name); + pr_warning(DRV_NAME ": %s: doing slave updates when " + "interface is down.\n", bond->dev->name); } /* Note: We can't hold bond->lock here, as bond_create grabs it. */ @@ -778,12 +777,14 @@ static ssize_t bonding_store_downdelay(struct device *d, goto out; } else { if ((new_value % bond->params.miimon) != 0) { - printk(KERN_WARNING DRV_NAME - ": %s: Warning: down delay (%d) is not a multiple " - "of miimon (%d), delay rounded to %d ms\n", - bond->dev->name, new_value, bond->params.miimon, - (new_value / bond->params.miimon) * - bond->params.miimon); + pr_warning(DRV_NAME + ": %s: Warning: down delay (%d) is not a " + "multiple of miimon (%d), delay rounded " + "to %d ms\n", + bond->dev->name, new_value, + bond->params.miimon, + (new_value / bond->params.miimon) * + bond->params.miimon); } bond->params.downdelay = new_value / bond->params.miimon; pr_info(DRV_NAME ": %s: Setting down delay to %d.\n", @@ -838,12 +839,14 @@ static ssize_t bonding_store_updelay(struct device *d, goto out; } else { if ((new_value % bond->params.miimon) != 0) { - printk(KERN_WARNING DRV_NAME - ": %s: Warning: up delay (%d) is not a multiple " - "of miimon (%d), updelay rounded to %d ms\n", - bond->dev->name, new_value, bond->params.miimon, - (new_value / bond->params.miimon) * - bond->params.miimon); + pr_warning(DRV_NAME + ": %s: Warning: up delay (%d) is not a " + "multiple of miimon (%d), updelay rounded " + "to %d ms\n", + bond->dev->name, new_value, + bond->params.miimon, + (new_value / bond->params.miimon) * + bond->params.miimon); } bond->params.updelay = new_value / bond->params.miimon; pr_info(DRV_NAME ": %s: Setting up delay to %d.\n", @@ -1299,9 +1302,9 @@ static ssize_t bonding_store_active_slave(struct device *d, new_active = slave; if (new_active == old_active) { /* do nothing */ - printk(KERN_INFO DRV_NAME - ": %s: %s is already the current active slave.\n", - bond->dev->name, slave->dev->name); + pr_info(DRV_NAME + ": %s: %s is already the current active slave.\n", + bond->dev->name, slave->dev->name); goto out; } else { @@ -1309,17 +1312,17 @@ static ssize_t bonding_store_active_slave(struct device *d, (old_active) && (new_active->link == BOND_LINK_UP) && IS_UP(new_active->dev)) { - printk(KERN_INFO DRV_NAME - ": %s: Setting %s as active slave.\n", - bond->dev->name, slave->dev->name); - bond_change_active_slave(bond, new_active); + pr_info(DRV_NAME + ": %s: Setting %s as active slave.\n", + bond->dev->name, slave->dev->name); + bond_change_active_slave(bond, new_active); } else { - printk(KERN_INFO DRV_NAME - ": %s: Could not set %s as active slave; " - "either %s is down or the link is down.\n", - bond->dev->name, slave->dev->name, - slave->dev->name); + pr_info(DRV_NAME + ": %s: Could not set %s as active slave; " + "either %s is down or the link is down.\n", + bond->dev->name, slave->dev->name, + slave->dev->name); } goto out; } @@ -1537,8 +1540,8 @@ int bond_create_sysfs(void) /* Is someone being kinky and naming a device bonding_master? */ if (__dev_get_by_name(&init_net, class_attr_bonding_masters.attr.name)) - printk(KERN_ERR - "network device named %s already exists in sysfs", + pr_err("network device named %s already " + "exists in sysfs", class_attr_bonding_masters.attr.name); ret = 0; } @@ -1566,7 +1569,7 @@ int bond_create_sysfs_entry(struct bonding *bond) err = sysfs_create_group(&(dev->dev.kobj), &bonding_group); if (err) - printk(KERN_EMERG "eek! didn't create group!\n"); + pr_emerg("eek! didn't create group!\n"); return err; } -- 1.8.2.3