From 945eb31337c2a8a09a62dcf5aca260bcde9c2a6c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 28 Oct 2009 18:28:30 +0000 Subject: [PATCH] e1000e: flow control doesn't re-enable When changing flow control (pause) parameters, the flow control thresholds (i.e. when to send XON/XOFF frames) may not be setup correctly on parts with copper media. Call the existing e1000_set_fc_watermarks() function to set these thresholds. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index a70999b..0364b91 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -335,10 +335,18 @@ static int e1000_set_pauseparam(struct net_device *netdev, hw->fc.current_mode = hw->fc.requested_mode; - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw)); + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000e_force_mac_fc(hw); + if (retval) + goto out; + e1000e_set_fc_watermarks(hw); + } } +out: clear_bit(__E1000_RESETTING, &adapter->state); return retval; } -- 1.8.2.3