From 82c1e49ccb28534b4e8b77d5f0ff553f19912d4d Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 15 Dec 2009 16:46:59 -0800 Subject: [PATCH] proc: remove docbook and example Example is outdated, it still uses old ->read_proc interfaces and "fb" example is plain racy. There are better examples all over the tree. Docbook itself says almost nothing about /proc and contain quite a number of simply wrong facts, e.g. device nodes support. What it does is describing at great length interface which are going to be removed. There are Documentation/filesystems/seq_file.txt in exchange. Signed-off-by: Alexey Dobriyan Acked-by: Erik Mouw Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DocBook/Makefile | 17 +- Documentation/DocBook/procfs-guide.tmpl | 626 -------------------------------- Documentation/DocBook/procfs_example.c | 201 ---------- 3 files changed, 3 insertions(+), 841 deletions(-) delete mode 100644 Documentation/DocBook/procfs-guide.tmpl delete mode 100644 Documentation/DocBook/procfs_example.c diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index ab8300f..ee34ceb 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -8,7 +8,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ - procfs-guide.xml writing_usb_driver.xml networking.xml \ + writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ @@ -65,7 +65,7 @@ KERNELDOC = $(srctree)/scripts/kernel-doc DOCPROC = $(objtree)/scripts/basic/docproc XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl -#XMLTOFLAGS += --skip-validation +XMLTOFLAGS += --skip-validation ### # DOCPROC is used for two purposes: @@ -101,17 +101,6 @@ endif # Changes in kernel-doc force a rebuild of all documentation $(BOOKS): $(KERNELDOC) -### -# procfs guide uses a .c file as example code. -# This requires an explicit dependency -C-procfs-example = procfs_example.xml -C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) -$(obj)/procfs-guide.xml: $(C-procfs-example2) - -# List of programs to build -##oops, this is a kernel module::hostprogs-y := procfs_example -obj-m += procfs_example.o - # Tell kbuild to always build the programs always := $(hostprogs-y) @@ -238,7 +227,7 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) $(index) + $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl deleted file mode 100644 index 9eba4b7..0000000 --- a/Documentation/DocBook/procfs-guide.tmpl +++ /dev/null @@ -1,626 +0,0 @@ - - -]> - - - - Linux Kernel Procfs Guide - - - - Erik - (J.A.K.) - Mouw - -
- mouw@nl.linux.org -
- - - - - This software and documentation were written while working on the - LART computing board - (http://www.lartmaker.nl/), - which was sponsored by the Delt University of Technology projects - Mobile Multi-media Communications and Ubiquitous Communications. - - - - - - - 1.0 - May 30, 2001 - Initial revision posted to linux-kernel - - - 1.1 - June 3, 2001 - Revised after comments from linux-kernel - - - - - 2001 - Erik Mouw - - - - - - This documentation is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - - - - This documentation is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - - - - - - - - Preface - - - This guide describes the use of the procfs file system from - within the Linux kernel. The idea to write this guide came up on - the #kernelnewbies IRC channel (see http://www.kernelnewbies.org/), - when Jeff Garzik explained the use of procfs and forwarded me a - message Alexander Viro wrote to the linux-kernel mailing list. I - agreed to write it up nicely, so here it is. - - - - I'd like to thank Jeff Garzik - jgarzik@pobox.com and Alexander Viro - viro@parcelfarce.linux.theplanet.co.uk for their input, - Tim Waugh twaugh@redhat.com for his Selfdocbook, - and Marc Joosen marcj@historia.et.tudelft.nl for - proofreading. - - - - Erik - - - - - - - - Introduction - - - The /proc file system - (procfs) is a special file system in the linux kernel. It's a - virtual file system: it is not associated with a block device - but exists only in memory. The files in the procfs are there to - allow userland programs access to certain information from the - kernel (like process information in /proc/[0-9]+/), but also for debug - purposes (like /proc/ksyms). - - - - This guide describes the use of the procfs file system from - within the Linux kernel. It starts by introducing all relevant - functions to manage the files within the file system. After that - it shows how to communicate with userland, and some tips and - tricks will be pointed out. Finally a complete example will be - shown. - - - - Note that the files in /proc/sys are sysctl files: they - don't belong to procfs and are governed by a completely - different API described in the Kernel API book. - - - - - - - - Managing procfs entries - - - This chapter describes the functions that various kernel - components use to populate the procfs with files, symlinks, - device nodes, and directories. - - - - A minor note before we start: if you want to use any of the - procfs functions, be sure to include the correct header file! - This should be one of the first lines in your code: - - - -#include <linux/proc_fs.h> - - - - - - - Creating a regular file - - - - struct proc_dir_entry* create_proc_entry - const char* name - mode_t mode - struct proc_dir_entry* parent - - - - - This function creates a regular file with the name - name, file mode - mode in the directory - parent. To create a file in the root of - the procfs, use NULL as - parent parameter. When successful, the - function will return a pointer to the freshly created - struct proc_dir_entry; otherwise it - will return NULL. describes how to do something useful with - regular files. - - - - Note that it is specifically supported that you can pass a - path that spans multiple directories. For example - create_proc_entry("drivers/via0/info") - will create the via0 - directory if necessary, with standard - 0755 permissions. - - - - If you only want to be able to read the file, the function - create_proc_read_entry described in may be used to create and initialise - the procfs entry in one single call. - - - - - - - - Creating a symlink - - - - struct proc_dir_entry* - proc_symlink const - char* name - struct proc_dir_entry* - parent const - char* dest - - - - - This creates a symlink in the procfs directory - parent that points from - name to - dest. This translates in userland to - ln -s dest - name. - - - - - Creating a directory - - - - struct proc_dir_entry* proc_mkdir - const char* name - struct proc_dir_entry* parent - - - - - Create a directory name in the procfs - directory parent. - - - - - - - - Removing an entry - - - - void remove_proc_entry - const char* name - struct proc_dir_entry* parent - - - - - Removes the entry name in the directory - parent from the procfs. Entries are - removed by their name, not by the - struct proc_dir_entry returned by the - various create functions. Note that this function doesn't - recursively remove entries. - - - - Be sure to free the data entry from - the struct proc_dir_entry before - remove_proc_entry is called (that is: if - there was some data allocated, of - course). See for more information - on using the data entry. - - - - - - - - - Communicating with userland - - - Instead of reading (or writing) information directly from - kernel memory, procfs works with call back - functions for files: functions that are called when - a specific file is being read or written. Such functions have - to be initialised after the procfs file is created by setting - the read_proc and/or - write_proc fields in the - struct proc_dir_entry* that the - function create_proc_entry returned: - - - -struct proc_dir_entry* entry; - -entry->read_proc = read_proc_foo; -entry->write_proc = write_proc_foo; - - - - If you only want to use a the - read_proc, the function - create_proc_read_entry described in may be used to create and initialise the - procfs entry in one single call. - - - - - - Reading data - - - The read function is a call back function that allows userland - processes to read data from the kernel. The read function - should have the following format: - - - - - int read_func - char* buffer - char** start - off_t off - int count - int* peof - void* data - - - - - The read function should write its information into the - buffer, which will be exactly - PAGE_SIZE bytes long. - - - - The parameter - peof should be used to signal that the - end of the file has been reached by writing - 1 to the memory location - peof points to. - - - - The data - parameter can be used to create a single call back function for - several files, see . - - - - The rest of the parameters and the return value are described - by a comment in fs/proc/generic.c as follows: - - -
- - You have three ways to return data: - - - - - Leave *start = NULL. (This is the default.) - Put the data of the requested offset at that - offset within the buffer. Return the number (n) - of bytes there are from the beginning of the - buffer up to the last byte of data. If the - number of supplied bytes (= n - offset) is - greater than zero and you didn't signal eof - and the reader is prepared to take more data - you will be called again with the requested - offset advanced by the number of bytes - absorbed. This interface is useful for files - no larger than the buffer. - - - - - Set *start to an unsigned long value less than - the buffer address but greater than zero. - Put the data of the requested offset at the - beginning of the buffer. Return the number of - bytes of data placed there. If this number is - greater than zero and you didn't signal eof - and the reader is prepared to take more data - you will be called again with the requested - offset advanced by *start. This interface is - useful when you have a large file consisting - of a series of blocks which you want to count - and return as wholes. - (Hack by Paul.Russell@rustcorp.com.au) - - - - - Set *start to an address within the buffer. - Put the data of the requested offset at *start. - Return the number of bytes of data placed there. - If this number is greater than zero and you - didn't signal eof and the reader is prepared to - take more data you will be called again with the - requested offset advanced by the number of bytes - absorbed. - - - -
- - - shows how to use a read call back - function. - - - - - - - - Writing data - - - The write call back function allows a userland process to write - data to the kernel, so it has some kind of control over the - kernel. The write function should have the following format: - - - - - int write_func - struct file* file - const char* buffer - unsigned long count - void* data - - - - - The write function should read count - bytes at maximum from the buffer. Note - that the buffer doesn't live in the - kernel's memory space, so it should first be copied to kernel - space with copy_from_user. The - file parameter is usually - ignored. shows how to use the - data parameter. - - - - Again, shows how to use this call back - function. - - - - - - - - A single call back for many files - - - When a large number of almost identical files is used, it's - quite inconvenient to use a separate call back function for - each file. A better approach is to have a single call back - function that distinguishes between the files by using the - data field in struct - proc_dir_entry. First of all, the - data field has to be initialised: - - - -struct proc_dir_entry* entry; -struct my_file_data *file_data; - -file_data = kmalloc(sizeof(struct my_file_data), GFP_KERNEL); -entry->data = file_data; - - - - The data field is a void - *, so it can be initialised with anything. - - - - Now that the data field is set, the - read_proc and - write_proc can use it to distinguish - between files because they get it passed into their - data parameter: - - - -int foo_read_func(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len; - - if(data == file_data) { - /* special case for this file */ - } else { - /* normal processing */ - } - - return len; -} - - - - Be sure to free the data data field - when removing the procfs entry. - - - - - - - - - Tips and tricks - - - - - - Convenience functions - - - - struct proc_dir_entry* create_proc_read_entry - const char* name - mode_t mode - struct proc_dir_entry* parent - read_proc_t* read_proc - void* data - - - - - This function creates a regular file in exactly the same way - as create_proc_entry from does, but also allows to set the read - function read_proc in one call. This - function can set the data as well, like - explained in . - - - - - - - Modules - - - If procfs is being used from within a module, be sure to set - the owner field in the - struct proc_dir_entry to - THIS_MODULE. - - - -struct proc_dir_entry* entry; - -entry->owner = THIS_MODULE; - - - - - - - - Mode and ownership - - - Sometimes it is useful to change the mode and/or ownership of - a procfs entry. Here is an example that shows how to achieve - that: - - - -struct proc_dir_entry* entry; - -entry->mode = S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH; -entry->uid = 0; -entry->gid = 100; - - - - - - - - - - Example - - - -&procfsexample; - - - diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c deleted file mode 100644 index a5b1179..0000000 --- a/Documentation/DocBook/procfs_example.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * procfs_example.c: an example proc interface - * - * Copyright (C) 2001, Erik Mouw (mouw@nl.linux.org) - * - * This file accompanies the procfs-guide in the Linux kernel - * source. Its main use is to demonstrate the concepts and - * functions described in the guide. - * - * This software has been developed while working on the LART - * computing board (http://www.lartmaker.nl), which was sponsored - * by the Delt University of Technology projects Mobile Multi-media - * Communications and Ubiquitous Communications. - * - * This program is free software; you can redistribute - * it and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place, - * Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include - - -#define MODULE_VERS "1.0" -#define MODULE_NAME "procfs_example" - -#define FOOBAR_LEN 8 - -struct fb_data_t { - char name[FOOBAR_LEN + 1]; - char value[FOOBAR_LEN + 1]; -}; - - -static struct proc_dir_entry *example_dir, *foo_file, - *bar_file, *jiffies_file, *symlink; - - -struct fb_data_t foo_data, bar_data; - - -static int proc_read_jiffies(char *page, char **start, - off_t off, int count, - int *eof, void *data) -{ - int len; - - len = sprintf(page, "jiffies = %ld\n", - jiffies); - - return len; -} - - -static int proc_read_foobar(char *page, char **start, - off_t off, int count, - int *eof, void *data) -{ - int len; - struct fb_data_t *fb_data = (struct fb_data_t *)data; - - /* DON'T DO THAT - buffer overruns are bad */ - len = sprintf(page, "%s = '%s'\n", - fb_data->name, fb_data->value); - - return len; -} - - -static int proc_write_foobar(struct file *file, - const char *buffer, - unsigned long count, - void *data) -{ - int len; - struct fb_data_t *fb_data = (struct fb_data_t *)data; - - if(count > FOOBAR_LEN) - len = FOOBAR_LEN; - else - len = count; - - if(copy_from_user(fb_data->value, buffer, len)) - return -EFAULT; - - fb_data->value[len] = '\0'; - - return len; -} - - -static int __init init_procfs_example(void) -{ - int rv = 0; - - /* create directory */ - example_dir = proc_mkdir(MODULE_NAME, NULL); - if(example_dir == NULL) { - rv = -ENOMEM; - goto out; - } - /* create jiffies using convenience function */ - jiffies_file = create_proc_read_entry("jiffies", - 0444, example_dir, - proc_read_jiffies, - NULL); - if(jiffies_file == NULL) { - rv = -ENOMEM; - goto no_jiffies; - } - - /* create foo and bar files using same callback - * functions - */ - foo_file = create_proc_entry("foo", 0644, example_dir); - if(foo_file == NULL) { - rv = -ENOMEM; - goto no_foo; - } - - strcpy(foo_data.name, "foo"); - strcpy(foo_data.value, "foo"); - foo_file->data = &foo_data; - foo_file->read_proc = proc_read_foobar; - foo_file->write_proc = proc_write_foobar; - - bar_file = create_proc_entry("bar", 0644, example_dir); - if(bar_file == NULL) { - rv = -ENOMEM; - goto no_bar; - } - - strcpy(bar_data.name, "bar"); - strcpy(bar_data.value, "bar"); - bar_file->data = &bar_data; - bar_file->read_proc = proc_read_foobar; - bar_file->write_proc = proc_write_foobar; - - /* create symlink */ - symlink = proc_symlink("jiffies_too", example_dir, - "jiffies"); - if(symlink == NULL) { - rv = -ENOMEM; - goto no_symlink; - } - - /* everything OK */ - printk(KERN_INFO "%s %s initialised\n", - MODULE_NAME, MODULE_VERS); - return 0; - -no_symlink: - remove_proc_entry("bar", example_dir); -no_bar: - remove_proc_entry("foo", example_dir); -no_foo: - remove_proc_entry("jiffies", example_dir); -no_jiffies: - remove_proc_entry(MODULE_NAME, NULL); -out: - return rv; -} - - -static void __exit cleanup_procfs_example(void) -{ - remove_proc_entry("jiffies_too", example_dir); - remove_proc_entry("bar", example_dir); - remove_proc_entry("foo", example_dir); - remove_proc_entry("jiffies", example_dir); - remove_proc_entry(MODULE_NAME, NULL); - - printk(KERN_INFO "%s %s removed\n", - MODULE_NAME, MODULE_VERS); -} - - -module_init(init_procfs_example); -module_exit(cleanup_procfs_example); - -MODULE_AUTHOR("Erik Mouw"); -MODULE_DESCRIPTION("procfs examples"); -MODULE_LICENSE("GPL"); -- 1.8.2.3